Juniper JN0-102 Exam Actual Questions

Page 1-13 (EXAMTOPICS – TOPIC 1 – VOLUME A)

1. The IP address 10.1.1.1 belongs to which class of IP address space?

A. Class A
B. Class B
C. Class C
D. Class D
Correct Answer: A

2. For the interface ge-1/2/3.4, what does "ge" represent?

A. SONET/SDH
B. Gigabit Ethernet
C. Aggregated Ethernet
D. GRE
Correct Answer: B

3. Which word starts a command to display the operational status of a Junos device?
A. put
B. set
C. show
D. get
Correct Answer: C

4. Which command prompt indicates that you are in operational mode?

A. user@router&
B. user@router#
C. user@router%
D. user@router>
Correct Answer: D

5. What is the decimal equivalent of 00000100?

A. 2
B. 4
C. 9
D. 12
Correct Answer: B

6. What is a valid IPv6 address?

A. 00:05:85:23:45:67
B. 127.0.0.1
C. 2001:0db8:3000:2215:0000:0000:aaaa:1111
D. 49.0001.0192.0168.1001.00
Correct Answer: C
7. Which simplified IPv6 address is the same as the IP address
2001:0000:1000:0000:0000:cbff:0020:0001/64?
A. 2001::1::cbff:2:0001/64
B. 2001::1000::cbff:20:1/64
C. 2001:0:1000::cbff:20:1/64
D. 2001:0:1:0:0:cbff:2:1/64
Correct Answer: C

8. What are three characteristics of UDP? (Choose three.)

A. UDP is faster than TCP.
B. UDP operates at the Transport Layer.
C. UDP is connection-oriented.
D. UDP data is sent best-effort.
E. UDP is more reliable than TCP.
Correct Answer: ABD

9. Which layer in the OSI model is responsible for translating frames into bits?
A. Application Layer
B. Presentation Layer
C. Data Link Layer
D. Physical Layer
Correct Answer: C

10. Which layer in the TCP/IP model is responsible for delivering packets to their destination?
A. Application Layer
B. Transport Layer
C. Internet Layer
D. Network Access Layer
Correct Answer: C

11. Why is IPv6 packet processing more effective than IPv4 packet processing?
A. fixed header size
B. smaller header size
C. fewer header fields
D. variable header size
Correct Answer: A

12. A user opens a webpage that requires the transmission of packets from the Web server to
the client's browser. The packets transmitted from the Web server to the client exceed the
smallest MTU value on the communications path.
Which two protocol functions allow this type of communication? (Choose two.)
A. packet segmentation
B. serialized checking
C. packet sequencing
D. parallel checking
Correct Answer: AC
13. Which two statements are true about TCP communication? (Choose two.)
A. The receiver acknowledges the final packet in each communications stream.
B. The receiver adds sequencing numbers to the packets received.
C. The sender adds sequencing numbers to the packets it sends.
D. The receiver acknowledges each packet it receives from the sending device.
Correct Answer: AC

14. Which two statements are true about optical networks? (Choose two.)
A. SONET and SDH both use time-division multiplexing.
B. An optical transport network system uses time-division multiplexing.
C. SONET and SDH both use wavelength-division multiplexing.
D. An optical transport network system uses wavelength-division multiplexing.
Correct Answer: AD

15. At which layer of the OSI model does error checking occur with IPv6?
A. Layer 2
B. Layer 3
C. Layer 4
D. Layer 7
Correct Answer: C

16. Which statement is correct regarding IPv6 addresses?

A. An IPv6 address consists of 128 bits separated into eight 16-bit hexadecimal sections.
B. An IPv6 address consists of 64 bits separated into four 16-bit hexadecimal sections.
C. An IPv6 address consists of 128 bits separated into sixteen 8-bit hexadecimal sections.
D. An IPv6 address consists of 64 bits separated into eight 8-bit hexadecimal sections.
Correct Answer: A

17. Which two statements about MPLS label-switched paths (LSPs) are true? (Choose two.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs must follow the IGP's shortest path.
D. LSPs can follow paths other than the IGP's shortest path.
Correct Answer: BD

18. What are two ways that packet fragmentation is handled differently between IPv6 and
IPv4? (Choose two.)
A. End hosts determine the path MTU for IPv6.
B. End hosts determine the path MTU for IPv4.
C. Packet fragmentation occurs at intermediate nodes for IPv4.
D. Packet fragmentation occurs at intermediate nodes for IPv6.
Correct Answer: AC
19. -- Exhibit --
user@router> show route protocol static
inet.0: 15 destinations, 15 routes (15 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
99.0.0.0/17 *[Static/5] 00:00:11
>to 10.1.1.2 via ge-0/0/1.0
99.0.0.0/19 *[Static/5] 00:00:11
>to 10.1.2.2 via ge-0/0/2.0
99.0.0.0/24 *[Static/5] 00:00:11
>to 10.1.3.2 via ge-0/0/3.0
99.0.0.0/26 *[Static/5] 00:00:11
>to 10.1.4.2 via ge-0/0/4.0
-- Exhibit --
In the exhibit, there are four static routes that route traffic through different interfaces.
Which interface does the router use if traffic is sent to the 99.0.0.1 destination?
A. ge-0/0/1
B. ge-0/0/2
C. ge-0/0/3
D. ge-0/0/4
Correct Answer: D

20. In dotted decimal notation, what is the equivalent of 11010101 01000010 01111111
11000010?
A. 213.66.127.194
B. 214.66.128.195
C. 212.64.143.194
D. 213.66.111.194
Correct Answer: A

21. What is the binary equivalent of 242.168.94.124?

A. 11110011 10101000 01011110 01111100
B. 11110010 10101010 01011110 01111100
C. 11110010 10101000 01011110 01111100
D. 11110010 10101000 01010110 01111100
Correct Answer: C

22. What is the last usable IP address in the 218.6.0.0/17 network?

A. 218.6.125.254
B. 218.6.126.254
C. 218.6.127.254
D. 218.6.128.254
Correct Answer: C

23. What is the network address for the 10.13.147.100/19 host?

A. 10.13.128.0
B. 10.13.147.0
C. 10.13.0.0
D. 10.13.100.0
Correct Answer: A
24. Which two prefixes would summarize the networks shown below? (Choose two.)
192.168.1.0/24
192.168.2.0/24
192.168.3.0/24
A. 192.168.0.0/23
B. 192.168.0.0/22
C. 192.168.0.0/24
D. 192.168.0.0/21
Correct Answer: BD

25. How many host addresses are available in the 172.27.0.0/28 network?
A. 6
B. 14
C. 28
D. 30
Correct Answer: B

26. What are three benefits of using IPv6? (Choose three.)

A. IPv6 supports a greater level of security by integrating features that were optional add-ons in IPv4.
B. IPv6 reduces administrative overhead using stateless address autoconfiguration for hosts.
C. IPv6 eliminates the need for private to public NAT using a large address pool.
D. IPv6 provides backward compatibility with IPv4 using the Next Header field.
E. IPv6 represents large IP addresses using dotted decimal notation.
Correct Answer: ABC

27. Which statement is correct about the forwarding table?

A. The forwarding table is stored only on the PFE.
B. The forwarding table contains all known routes.
C. The forwarding table is stored on both the RE and PFE.
D. The forwarding table is stored only on the RE.
Correct Answer: C

28. Which statement describes exception traffic?

A. Exception traffic must be sent to the PFE for processing.
B. Exception traffic enters one ingress port and is sent out multiple egress ports.
C. Exception traffic is rate-limited on the internal link to prevent DoS attacks.
D. Exception traffic is processed after forwarding traffic when congestion exists.
Correct Answer: C
29. What are two benefits of the modular design of the Junos OS? (Choose two.)
A. Each module uses application-specific integrated circuits (ASICs).
B. Each module runs in its own protected memory space.
C. Each module can be individually restarted.
D. Each module is supported across all Junos platforms.
Correct Answer: BC
30. Which statement describes the PFE?
A. The PFE controls the RE by providing Layer 2 and Layer 3 forwarding tables.
B. The PFE implements advanced services such as policing, stateless firewall filtering, and class of
service.
C. The PFE sends traffic to the RE for systematic packet forwarding.
D. The PFE receives hardware and environmental status messages from the RE.
Correct Answer: B

31. Which process is responsible for the routing protocols on a Junos device?
A. rpd
B. mgd
C. dcd
D. chassisd
Correct Answer: A

32. Which process is responsible for the configuration of the router and all user commands on
a Junos device?
A. rpd
B. chassisd
C. dcd
D. mgd
Correct Answer: D

33. How does the PFE handle unicast transit traffic destined for an existing forwarding table
entry?
A. It sends the traffic through one egress port toward its destination.
B. It sends the traffic through multiple egress ports to all available receivers.
C. It sends the traffic through an internal link to the RE.
D. It sends the traffic to the local system for further processing.
Correct Answer: A

34. Which two design goals describe the Junos OS design? (Choose two.)
A. clean separation of security and routing policies
B. clean separation of control and forwarding planes
C. modularization of multiple software processes
D. a single hardware platform for all software applications
Correct Answer: BC

35. Which two Junos platforms provide stateful firewall functionality? (Choose two.)
A. MX Series
B. EX Series
C. SRX Series
D. QFX Series
Correct Answer: AC
36. What are two examples of RE exception traffic? (Choose two.)
A. BGP updates that travel through the local router and are destined for a remote router.
B. OSPF hello packets that are sent from a remote router and are destined for the local router.
C. Telnet traffic that is sent from a remote host and is destined for the local router.
D. Telnet traffic that travels through the local router and is destined for a remote end host.
Correct Answer: BC

37. In the Junos OS, what handles transit traffic?

A. Transit traffic is handled by the RE only.
B. Transit traffic is handled by the PFE only.
C. Transit traffic is handled by both the RE and the PFE.
D. Transit traffic is not handled by the RE or the PFE.
Correct Answer: B

38. Which statement describes transit traffic?

A. Traffic addressed to the chassis that requires some form of special handling by the RE before it
can be forwarded out an egress port.
B. Traffic that enters an ingress port, is compared against the forwarding table, and is forwarded out
an egress port.
C. Any traffic that requires the generation of an ICMP message.
D. Traffic that requires some form of special attention and does not pass through the device.
Correct Answer: B

39. What is the central processing component of the forwarding plane?

A. PFE
B. RE
C. Junos OS
D. forwarding table
Correct Answer: A

40. Which statement is correct regarding the Junos OS?

A. The same Junos OS image is used on all Junos devices.
B. The Junos OS provides separation between the control and forwarding planes.
C. Each Junos OS image is based on model-specific source code.
D. The Junos OS creates a secondary instance of the kernel to ensure redundancy.
Correct Answer: B

41. What are two functions of the RE? (Choose two).

A. to maintain routing tables
B. to forward traffic toward its destination
C. to manage the PFE
D. to implement various services such as policing, stateless firewall filtering, and class of service
Correct Answer: AC
42. Which statement is correct regarding exception traffic processing?
A. Exception traffic is only handled by the PFE.
B. Exception traffic is rate-limited across the internal link to protect the RE.
C. Exception traffic is not prioritized during times of congestion.
D. Exception traffic is forwarded based on forwarding table entries.
Correct Answer: B

43. When using keyboard shortcuts, which single keystroke combination allows users to
erase the entire current command?
A. Ctrl + a
B. Ctrl + e
C. Ctrl + u
D. Ctrl + w
Correct Answer: C

44. When using keyboard shortcuts, which keystroke combination allows users to erase a
single word to the left of the cursor?
A. Ctrl + a
B. Ctrl + e
C. Ctrl + u
D. Ctrl + w
Correct Answer: D

45. What must you type to enter operational mode from the root@% command prompt?
A. exit
B. configure
C. edit
D. cli
Correct Answer: D

46. Which two commands would you use to discard a candidate configuration? (Choose two.)
A. rollback
B. delete
C. delete 0
D. rollback 0
Correct Answer: AD

47. Which two statements are true about the configure exclusive command? (Choose two.)
A. It allows users to retain all uncommitted changes when exiting exclusive configuration mode.
B. It allows multiple users to edit private copies of the configuration concurrently.
C. It causes the loss of all uncommitted changes when exiting exclusive configuration mode.
D. It excludes other users from editing the configuration.
Correct Answer: CD
48. Which command will display the active configuration?
A. user@router> show configuration
B. user@router# show
C. user@router> show system configuration
D. user@router> show system commit
Correct Answer: A

49. Which three commands will cause a logical interface to go administratively down after
being committed? (Choose three.)
A. shutdown
B. deactivate
C. disable
D. down
E. delete
Correct Answer: BCE

50. Which command returns a list of commands in which a given keyword is used throughout
the Junos hierarchies?
A. help topic
B. help reference
C. help apropos
D. help tip
Correct Answer: C

51. Which three statements are true regarding the candidate configuration? (Choose three.)
A. The candidate configuration is a temporary configuration that might become the active
configuration.
B. A candidate configuration is initially populated with the configuration currently active on the system.
C. Changes to the candidate configuration take effect immediately.
D. The candidate configuration becomes the active configuration after a system reboot.
E. The configure private command allows concurrent editing of a candidate configuration by multiple
users.
Correct Answer: ABE
52. -- Exhibit --
[edit]
user@router# show | compare
[edit protocols ospf area 0.0.0.0]
- interface ge-0/0/0.0 {
- disable;
-}
[edit protocols ospf]
area 0.0.0.0 { ... }
+ area 0.0.0.1 {
+ interface ge-0/0/0.0;
+}
-- Exhibit --

Referring to the exhibit, what are two differences between the active and candidate
configurations? (Choose two.)
A. The ge-0/0/0 interface was added to the candidate configuration.
B. Area 0 was added to the active configuration.
C. Area 1 was added to the candidate configuration.
D. The ge-0/0/0 interface was added to the active configuration.
Correct Answer: AC

53. Which mode is used to allow only a single person to edit a configuration?
A. configure batch
B. configure private
C. configure exclusive
D. configure dynamic
Correct Answer: C

54. Which information would you find using the CLI help function? (Choose two.)
A. message of the day
B. tip of the day
C. explanation for specific system log error messages
D. explanation for specific traceoptions log messages
Correct Answer: BC

55. Which two statements are true of login classes? (Choose two.)
A. Users can be members of multiple login classes.
B. Login classes define authorization parameters for a user.
C. There are five system-defined login classes.
D. Login class permission flags can be overridden for certain commands.
Correct Answer: BD
56. Which two statements are true regarding rescue configurations? (Choose two.)
A. Once saved, a rescue configuration is loaded using the rollback 0 command.
B. The rescue configuration must contain the minimal elements necessary to restore network
connectivity.
C. A minimal rescue configuration is defined by default.
D. A rescue configuration must include a root password.
Correct Answer: BD

57. -- Exhibit --
Amnesiac (ttyu0)
login:
-- Exhibit --

Which statement is correct about the information shown in the exhibit?

A. The factory-default configuration is running on the device.
B. The Junos OS was corrupted and did not boot correctly.
C. The device was recently upgraded to a newer version of the Junos OS.
D. The device's memory has been corrupted and no file system is present after a reboot.
Correct Answer: A

58. Which two statements are true regarding the use of NTP clock synchronization? (Choose
two.)
A. The Junos OS supports client, server, and symmetric modes of NTP operation.
B. Synchronized time on all network devices makes log messages more useful for troubleshooting.
C. Authentication methods are not supported.
D. The Junos OS must be used as the primary time reference.
Correct Answer: AB

59. Question #59 Topic 1

You are asked to change the cable on interface ge-2/1/3.
Which statement is correct?
A. The cable is found on FPC 1, slot 3, and port 2.
B. The cable is found on slot 1, port 2, and FPC 3.
C. The cable is found on port 3, FPC 2, and slot 1.
D. The cable is found on FPC 1, slot 2, and port 3.
Correct Answer: C

60. You are asked to change the cable on interface fe-4/2/3.

Which statement is correct?
A. The cable is found on port 4, FPC 2, and slot 3.
B. The cable is found on slot 2, port 3, and FPC 4.
C. The cable is found on FPC 4, slot 3, and port 2.
D. The cable is found on slot 2, FPC 3, and port 4.
Correct Answer: B
61. You are asked to change the cable on interface ge-0/2/1.
Which statement is correct?
A. The cable is found on slot 2, port 0, and FPC 1.
B. The cable is found on FPC 0, slot 1, and port 2.
C. The cable is found on port 1, slot 0, and FPC 2.
D. The cable is found on slot 2, port 1, and FPC 0.
Correct Answer: D

62. -- Exhibit --
user@router> show configuration
groups {
ge-int {
interfaces {
<ge-*> {
unit 0 {
familyinet {
address 10.10.12.1/24;
}
}
}
}
}
}
...
interfaces {
ge-0/0/1 {
unit 0;
}
-- Exhibit --
Referring to the exhibit, which two actions would you take to only apply the 10.10.12.1/24
address to the ge-0/0/1.0 interface?
A. Apply the ge-int group to the configuration at the [edit] hierarchy.
B. Apply the ge-int group to the configuration at the [edit interfaces ge-0/0/1] hierarchy.
C. Apply the ge-int group to the configuration at the [edit interfaces ge-0/0/1 unit 0] hierarchy.
D. Apply the ge-int group to the configuration at the [edit interfaces] hierarchy.
Correct Answer: BC

63. Which interface type connects the control and forwarding planes on an MX Series device?
A. fxp1
B. fxp0
C. me0
D. ae1
Correct Answer: A

64. Which command is used to restore a Junos device to its default state?
A. load factory-default
B. load override factory-default
C. load replace default
D. load set default
Correct Answer: A
65. -- Exhibit --
{master:0}[edit interfaces]
user@switch# show
me0 {
disable;
unit 0 {
familyinet {
address 10.1.1.10/24;
}
}
}
-- Exhibit --
Administrators report that they are unable to access the management interface of the EX
Series device shown in the exhibit.
Which command will resolve this problem?
A. delete me0 disable
B. activate me0
C. set me0 unit 0 enable
D. deactivate me0
Correct Answer: A

66. Which statement is true about logical units?

A. Logical units are similar to VLANs used by other vendors.
B. A logical unit is required for transit interfaces.
C. Frame Relay encapsulation supports one logical unit.
D. Link speed and duplex are configured in the logical unit properties.
Correct Answer: B

67. -- Exhibit --
[edit system syslog]
user@router# show
host 152.170.10.10 {
any warning;
}
file changes {
change-log info;
}
-- Exhibit --

Referring to the exhibit, which two statements are true? (Choose two.)
A. Any warning message will be sent to the 152.170.10.10 host.
B. A warning message will be logged when the 152.170.10.10 host logs in.
C. Changes to the device's internal temperatures will be logged.
D. Changes to the configuration will be logged.
Correct Answer: AD
68. Which command is used to load the rescue configuration?
A. load override rescue
B. rollback rescue
C. load replace rescue-configuration
D. rollback 49
Correct Answer: B

69. Which two external authentication servers are supported for administrative access to a
Junos device? (Choose two.)
A. RADIUS
B. LDAP
C. ACE
D. TACACS+
Correct Answer: AD

70. -- Exhibit --
user@router> restart
^
unknown command.
-- Exhibit --
You are investigating routing problems on a device running the Junos OS. You receive the
error shown in the exhibit when you attempt to restart the routing process.
Which statement describes the problem?
A. You have typed an invalid command.
B. You must be in configuration mode to restart the routing process.
C. You do not have permission to restart the routing process.
D. You must wait until close of business to restart the routing process, based on user-defined policy.
Correct Answer: C

71. At which command prompt would you issue the set date <date> command?
A. [edit chassis] user@router#
B. [edit] user@router#
C. [edit system] user@router#
D. user@router>
Correct Answer: D

72. You must apply the family inet configuration parameter only to Gigabit Ethernet interfaces
that are in FPC 2.
Which output applies to this configuration?
A. [edit groups] user@router# show ge-int { interfaces { <ge-*> { unit 0 { familyinet; } } } }
B. [edit groups] user@router# show ge-int { interfaces { <*> { unit 0 { familyinet; } } } }
C. [edit groups] user@router# show ge-int { interfaces { <*-2/*/*> { unit 0 { familyinet; } } } }
D. [edit groups] user@router# show ge-int { interfaces { <ge-2/*> { unit 0 { familyinet; } } }
Correct Answer: D
73. -- Exhibit --
[edit interfaces ge-0/0/1]
user@router# show
unit 100 {
vlan-id 100;
family inet {
address 10.1.1.1 /24;
}
}
[edit interfaces ge-0/0/1]
user@router# commit check
[edit interfaces ge-0/0/1]
'unit 100'
Only unit 0 is valid for this encapsulation
error: configuration check-out failed
-- Exhibit --
Referring to the exhibit, you are unable to commit the configuration for the ge-0/0/1 interface.
What must you do to commit the configuration?
A. You must set the vlan-tagging parameter under the [edit interfaces ge-0/0/1] hierarchy.
B. You must use the rename command to change unit 100 to unit 0.
C. You must set the encapsulation flexible-ethernet-services parameter under the [edit interfaces ge-
0/0/1] hierarchy.
D. You must set the encapsulation vlan-ccc parameter under the [edit interfaces ge-0/0/1 unit 100]
hierarchy.
Correct Answer: A

74. You are asked to configure the configuration archival feature on your Junos devices.
Which two transfer methods are available? (Choose two.)
A. TFTP
B. FTP
C. SCP
D. SFTP
Correct Answer: BC

75. -- Exhibit --
user@router> show system alarms
1 alarms currently active
Alarm time Class Description
2013-09-14 23:54:01 UTC Minor Rescue configuration is not set
-- Exhibit --
Which command will resolve the problem shown in the exhibit?
A. user@router> request system configuration rescue save
B. user@router# request system configuration rescue save
C. user@router> file copy current /config/rescue.conf
D. user@router# file copy current /config/rescue.conf
Correct Answer: A
76. Which command displays only the interfaces that are operationally and administratively
up?
A. show interfaces terse | match up
B. show interfaces terse | match down
C. show interfaces terse | except up
D. show interfaces terse | except down
Correct Answer: D

77. To which directory does the Junos OS write traceoptions files?

A. /var/tmp/
B. /var/
C. /var/log/
D. /var/home/<username>/
Correct Answer: C

78. Which command gracefully shuts down the Junos OS?

A. request system reboot
B. request system logout
C. request system halt
D. restart gracefully
Correct Answer: C

79. Which action does the ping 172.18.1.1 size 5 command perform?
A. It sends only five ping requests to the 172.18.1.1 destination.
B. It sends a continuous ping with a packet length of five bytes to the 172.18.1.1 destination.
C. It sends five rapid ping requests to the 172.18.1.1 destination.
D. It sends a continuous rapid ping with a packet length of five bytes to the 172.18.1.1 destination.
Correct Answer: B

80. Which command displays the current temperature of a Junos device's components?
A. show chassis temperature-thresholds
B. show chassis environment
C. show chassis hardware
D. show chassis alarms
Correct Answer: B

81. Which command would you use to view interface usage details in real time?
A. show interfaces terse
B. show interfaces extensive
C. monitor interface traffic
D. monitor traffic interface
Correct Answer: C
82. What happens when you issue the ping 172.19.102.2 count 5 command?
A. ICMP echo requests are sent to 172.19.102.2 in five-millisecond intervals.
B. ICMP echo requests are sent to 172.19.102.2 until five packets are dropped.
C. ICMP echo requests are sent to 172.19.102.2 five times.
D. ICMP echo requests are sent continuously to 172.19.102.2 for five seconds.
Correct Answer: C

83. You are asked to configure real-time performance monitoring (RPM) between two Junos
devices to track traffic in your network.
Which two application traffic types can you track? (Choose two.)
A. ICMP
B. SNMP
C. TCP
D. HTTPS
Correct Answer: AC

84. You are troubleshooting a routing issue and need to check the hop-by-hop path to the
10.10.10.10 destination.
Which three commands would display the path? (Choose three.)
A. user@router# traceroute 10.10.10.10
B. user@router> ping record-route 10.10.10.10
C. user@router>traceroute 10.10.10.10
D. user@router# run traceroute 10.10.10.10
E. user@router# ping record-route 10.10.10.10
Correct Answer: BCD

85. You are asked to free up disk space so you can update your version of the Junos OS.
Which two commands display the files that will be removed? (Choose two.)
A. user@router> request system storage cleanup
B. user@router> show system storage
C. user@router> request system storage cleanup dry-run
D. user@router> show system storage detail
Correct Answer: AC

86. Which two commands are used during the password recovery process? (Choose two.)
A. clear system login
B. boot -s
C. recovery
D. delete system root-authentication
Correct Answer: BC
87. You receive an alarm that your Junos device is experiencing problems regarding
temperature.
Which two commands would you use to investigate this problem? (Choose two.)
A. show chassis hardware
B. show chassis temperature-thresholds
C. show chassis pic fpc-slot <value> pic-slot <value>
D. show chassis environment
Correct Answer: BD

88. -- Exhibit --
[edit interfaces ge-0/0/6]
user@router# show
unit 0 {
familyinet {
address 172.16.10.100/24;
address 172.16.10.101/24;
}
}
-- Exhibit --
You have two IP addresses configured on the ge-0/0/6 interface, as shown in the exhibit. You
want to select the 172.16.10.101 address as the source address for packets sent from this
interface to hosts on a remote subnet.
Which parameter would you add to the 172.16.10.101 address to complete this task?
A. preferred
B. broadcast
C. primary
D. arp 172.16.10.101
Correct Answer: A

89. Which routing instance type is used to facilitate filter-based forwarding?

A. VRF
B. FBF
C. forwarding
D. no-forwarding
Correct Answer: C

90. Which two statements are true about static routes in the Junos OS? (Choose two.)
A. Static routes are defined at the [edit routing-instances] hierarchy.
B. Static routes must have a next hop defined.
C. Static routes remain in the routing table until you remove them or until they become inactive.
D. Static routes are learned by neighboring devices and added to their routing tables.
Correct Answer: BC
91. Which configuration parameter on a Junos device alters the default next-hop resolution
behavior of a static route?
A. no-readvertise
B. resolve
C. preference
D. passive
Correct Answer: B

92. Which two statements are true regarding route preference? (Choose two.)
A. Lower preference values are more preferred than higher preference values.
B. You can modify the default preference values for any of the routing information sources.
C. By default, a static route is more preferred than a RIP route.
D. A static route is always preferred over a direct route.
Correct Answer: AC

93. Which two statements are true regarding routing tables? (Choose two.)
A. The routing table is populated by the forwarding table.
B. Devices running the Junos OS can accommodate multiple routing tables.
C. Information learned from routing protocols is stored in the routing table.
D. The primary routing table for IPv4 unicast routes is inet.4.
Correct Answer: BC

94. Which two statements are correct when you use the reject parameter as the next-hop value
for a static route? (Choose two.)
A. The packet is dropped and the packet's source is marked with the no-readvertise parameter.
B. The system sends the packet back to the source.
C. The packet is dropped from the network.
D. The system sends an ICMP message back to the source of the packet.
Correct Answer: CD

95. Which routing table stores IPv4 unicast routes and is used by multicast routing protocols
to prevent loops?
A. inet.0
B. inet.1
C. inet.2
D. inet.3
Correct Answer: C

96. Which source of routing information is preferred by default?

A. OSPF internal
B. OSPF external
C. IS-IS Level 1
D. IS-IS Level 2
Correct Answer: A
97. What are two routing requirements for a device to communicate with another device?
(Choose two.)
A. end-to-end communications path
B. hosts on the same Layer 2 broadcast domain
C. hosts on the same Layer 3 broadcast domain
D. routing information on participating Layer 3 devices
Correct Answer: AD

98. - Exhibit --
inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
172.23.10.0/24 *[Direct/0] 21:59:56
>via ge-0/0/6.0
172.23.10.100/32 *[Local/0] 22:00:10

Local via ge-0/0/6.0 -

172.23.12.0/24 *[Static/5] 00:01:36
>to 172.23.10.1 via ge-0/0/6.0
172.23.15.0/24 *[Static/5] 00:01:36
>to 172.23.10.1 via ge-0/0/6.0
-- Exhibit --
Users are unable to access resources in the 172.23.14.0/24 subnet.
Referring to the exhibit, which two actions would solve this problem? (Choose two.)
A. Configure a separate routing instance.
B. Configure a default static route.
C. Configure a static route to 172.23.14.0/24.
D. Configure the existing routes to resolve the indirect next hop.
Correct Answer: BC

99. What are three types of routing instances? (Choose three.)

A. VPN
B. virtual-router
C. policy
D. VRF
E. forwarding
Correct Answer: BDE

100. Which two statements describe the forwarding table in the Junos OS? (Choose two.)
A. The forwarding table contains all known routes.
B. The forwarding table stores a subset of information from the routing table.
C. Junos devices use the forwarding table to compare incoming packets against existing entries to
determine the next hop.
D. If multiple matches exist, the forwarding table uses the least-specific entry to forward packets
toward the destination.
Correct Answer: BC

--END OF TOPIC 1 - VOLUME A--