Scribd
Upload
87 views2 pages

CFB Format

The document provides the packaging material specification for a corrugated box to hold two 5 kg products of Cruiser. The specification details that the 5 ply corrugated box is made of kraft paper with accurate cutting and folding. It lists the internal dimensions of the box which should be 640 mm x 320 mm x 280 mm with a tolerance of ±5 mm. It also specifies the GSM and burst factor requirements for the outer kraft paper liner.

Uploaded by

Deepak Bhanji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
87 views2 pages

CFB Format

The document provides the packaging material specification for a corrugated box to hold two 5 kg products of Cruiser. The specification details that the 5 ply corrugated box is made of kraft paper with accurate cutting and folding. It lists the internal dimensions of the box which should be 640 mm x 320 mm x 280 mm with a tolerance of ±5 mm. It also specifies the GSM and burst factor requirements for the outer kraft paper liner.

Uploaded by

Deepak Bhanji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

PACKAGING MATERIAL SPECIFICATION

SPECIFICATION NO PKD-CRS-038 REV.01


DATE 25-Feb-19 CONFIGUATION
APAC AGI CODE 4105068 2x1
PACK TYPE CORRUGATED BOX ARRANGEMENT
PACKAGING & PACK SIZE 5 kg x 2 nos
TECHNOLOGY
PRODUCT NAME CRUISER
Sr. No. ATTRIBUTE REQUIREMENT REFERENCE

5 ply corrugated box made up of


combination of Kraft paper with
acceptable general physical
appearance. Joints stitched with
anti-rust staples. Inner flaps should
be corner cut for free erecting of
1 DESCRIPTION box. Top layer should be Visual observation
wrinkle/crease free. Cutting should
be in accurate alignment while
folding.

2 INTERNAL DIMENSIONS IN MM Dimensions Tolerance ±


a BOX LENGTH (I.D) IN MM 640 5
b BOX WIDTH (I.D) IN MM 320 5 Measuring tape [L.C: 1.0 mm]
c BOX HEIGHT (I.D) IN MM 280 5
3 GSM OF PAPER Burst Factor g/m2 ±

a OUTER LINER (KRAFT PAPER ) 28 180 9


As per IS 1060
b OUTER LINER (KRAFT PAPER ) 24 120 6
c OUTER LINER (KRAFT PAPER ) Medium + Narrow As per IS 2771
REVISION HISTORY.
Version. Reason for change: Date of change:
1 Diamension of Box and Partition are revised 25.02.2019

Approved By
Deepak Bhanji
Packaging Engineer
Approved By
Deepak Bhanji
Packaging Engineer

You might also like