Scribd Logo
Upload

Welcome to Scribd!

  • 582 views

    MMN Bina SDN BHD: Method Statement For Drainage Works

    Uploaded by

    Fosu Dickson
    This document provides a method statement for drainage works for a proposed technology park construction project. It outlines the standards, materials, and processes that will be used, including laying precast concrete drains and channels, and testing the completed drainage system. Safety procedures will comply with the company's health and safety manual. The drainage network will be constructed to direct water flows away from buildings to planned gradients and intercepted where gradients change.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MMN Bina SDN BHD: Method Statement For Drainage Works

    Uploaded by

    Fosu Dickson
    582 views6 pages
    This document provides a method statement for drainage works for a proposed technology park construction project. It outlines the standards, materials, and processes that will be used, including laying precast concrete drains and channels, and testing the completed drainage system. Safety procedures will comply with the company's health and safety manual. The drainage network will be constructed to direct water flows away from buildings to planned gradients and intercepted where gradients change.

    Original Description:

    lots

    Original Title

    hhh

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a method statement for drainage works for a proposed technology park construction project. It outlines the standards, materials, and processes that will be used, including laying precast concrete drains and channels, and testing the completed drainage system. Safety procedures will comply with the company's health and safety manual. The drainage network will be constructed to direct water flows away from buildings to planned gradients and intercepted where gradients change.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    582 views6 pages

    MMN Bina SDN BHD: Method Statement For Drainage Works

    Uploaded by

    Fosu Dickson
    This document provides a method statement for drainage works for a proposed technology park construction project. It outlines the standards, materials, and processes that will be used, including laying precast concrete drains and channels, and testing the completed drainage system. Safety procedures will comply with the company's health and safety manual. The drainage network will be constructed to direct water flows away from buildings to planned gradients and intercepted where gradients change.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    MMN Bina Sdn Bhd

    THE PROPOSED CONSTRUCTION AND COMPELTION OF MAIN


    INFRASTRUCTURE WORK FOR PAHANG TECHNOLOGY PARK IN GAMBANG,
    PAHANG DARUL MAKMUR FOR EAST COAST REGION ECONOMIC REGION
    DEVELOPMENT COUNCIL.

    METHOD STATEMENT – DRAINAGE WORK

    METHOD STATEMENT FOR DRAINAGE WORKS

    TABLE OF CONTENTS

    1.0 INTRODUCTION
    2.0 STANDARDS AND CODES
    3.0 MATERIAL
    4.0 LAYING OF DRAINS
    5.0 TESTING DRAINS
    6.0 INSPECTION & TESTING
    7.0 SAFETY PLAN

    1.0 INTRODUCTION
    This procedure covers the requirement for the drains and culverts installation.
    MMN Bina Sdn Bhd
    THE PROPOSED CONSTRUCTION AND COMPELTION OF MAIN
    INFRASTRUCTURE WORK FOR PAHANG TECHNOLOGY PARK IN GAMBANG,
    PAHANG DARUL MAKMUR FOR EAST COAST REGION ECONOMIC REGION
    DEVELOPMENT COUNCIL.

    METHOD STATEMENT – DRAINAGE WORK

    2.0 STANDARDS AND CODES


    Unless agreed otherwise, the latest edition of the following codes and standards shall
    be practiced.

    BS 8810 Structural Use of Concrete

    BS 5135 Specification for the Process of Arc Welding of Carbon and Carbon
    Manganese Steels

    MS 145 Steel fabric for the reinforcement of concrete

    MS 146 Specification for hot rolled steel bars for the reinforcement of concrete

    3.0 MATERIAL

    A. GENERAL

    All drainage work shall be carried out in conformity with the drawings and
    specification.

    B. EXCAVATION

    The bottoms of all excavations shall be trimmed and consolidated to the correct
    levels. Where the bottom is insufficiently firm, the Contractor shall excavate until, in
    the ER.’s opinion a firm bottom is obtained and the level shall be made up with
    material of the same composition as for drain beds. Particulars of such additional
    work shall be agreed with the ER before the work is covered up.

    C. PLANKING AND STRUTTING


    MMN Bina Sdn Bhd
    THE PROPOSED CONSTRUCTION AND COMPELTION OF MAIN
    INFRASTRUCTURE WORK FOR PAHANG TECHNOLOGY PARK IN GAMBANG,
    PAHANG DARUL MAKMUR FOR EAST COAST REGION ECONOMIC REGION
    DEVELOPMENT COUNCIL.

    METHOD STATEMENT – DRAINAGE WORK

    Care shall be taken not to undermine the foundations of buildings and, if so directed
    by the ER, planking and strutting shall be left in or other means adopted to protect the
    foundations.

    D. BACKFILLING

    Trenches shall be filled to a depth of 12" with selected fine materials carefully hand
    packed around the pipe. On no account shall material be tipped into the trench until
    the first 12" has been completed. Filling shall be continued in layers not exceeding
    12" thick, well rammed and if necessary, watered.

    E. CONCRETE BEDS

    Concrete beds shall be (1:3:6 – ½" aggregate) in beds for drains shall be a minimum
    of 6" thick unless indicated otherwise. Beds shall be finished to the correct gradients.
    Where as directed, beds shall be reinforced.
    Care shall be taken not to undermine the foundations of buildings and, if so directed
    by the ER planking and strutting shall be left in or other means adopted to protect the
    foundations.

    F. PRECAST CONCRETE DRAINS

    Precast concrete channel shall be cast to the size and shape as shown on the drawings
    and shall be of concrete (1:2:4 – ¾ aggregate).
    MMN Bina Sdn Bhd
    THE PROPOSED CONSTRUCTION AND COMPELTION OF MAIN
    INFRASTRUCTURE WORK FOR PAHANG TECHNOLOGY PARK IN GAMBANG,
    PAHANG DARUL MAKMUR FOR EAST COAST REGION ECONOMIC REGION
    DEVELOPMENT COUNCIL.

    METHOD STATEMENT – DRAINAGE WORK

    Moulds for the manufacture of the concrete units shall be of strong construction lined
    with approved metallic surface. The units produced must be sound and with a smooth
    inside surface to the satisfaction of the ER.

    The block drains shall be jointed with 1:3 cement mortar to produce a smooth surface
    and even gradient.

    G. PRECAST CONCRETE KERB

    Precast concrete kerb shall be cast to the size and shape as shown on the drawings and
    shall be of concrete (1:2:4 – ¾" aggregate).

    H. BASE AND SIDES

    Base and sides shall be in 1:3:6 – 1 ½" mass concrete.

    I. COVERING

    Covering to drain shall be of concrete (1:2:4 – ¾" aggregate).

    J. BRICKS TO SIDES OF DRAIN

    Brickwork to drains shall be ordinary brick as approved by ER.

    4.0 LAYING OF DRAINS

    Positions of drains generally shall be as shown on drawings but the exact alignment
    and invert levels shall be confirmed by the ER. on the site.
    MMN Bina Sdn Bhd
    THE PROPOSED CONSTRUCTION AND COMPELTION OF MAIN
    INFRASTRUCTURE WORK FOR PAHANG TECHNOLOGY PARK IN GAMBANG,
    PAHANG DARUL MAKMUR FOR EAST COAST REGION ECONOMIC REGION
    DEVELOPMENT COUNCIL.

    METHOD STATEMENT – DRAINAGE WORK

    Drains shall be formed in accordance with the sizes and cross-sections shown on
    drawings. They shall be so constructed that the inverts slope at a uniform or
    increasing gradient. Where natural ground conditions do not permit this, silt pits shall
    be provided when steep gradients change into a flatter gradient.

    Precast concrete drains shall be laid true to line and grade and level on a firm base
    with closely butting joints. No joint shall exceed 3/8" in width and the precast section
    in place shall be buttered with mortar, squeezed out and struck off flush with the
    finished surface. All cavities on the sides of the invert shall be completely backfilled
    and rammed. Precast side slabs shall be laid fully resting on firm ground breaking
    joints with the invert. Where the slab and top edge of the invert meets, a continuous
    strip of in-situ concrete shall be provided as shown on drawings to give a firm bond
    between the two meeting edges and to seal it watertight. The slab shall be tamped to
    rest squarely on ground surface and shall not be left supported on soil loosely packed
    behind the slab.

    Drains shall be cascaded with drops where directed with overlapping joints and joints
    made good with in-situ concrete. Drain inter-sections shall be carefully constructed
    with in-coming drain inclined to the direction of flow of the main drain. All inter-
    sections shall be neatly built-in and made good with in-situ concrete.

    5.0 TESTING DRAINS

    The Contractor shall notify the ER when the drains are ready for testing and no
    trenches are to be filled in until the drains have been tested.
    Allow for testing the drains in section, with the water test or by other means when laid
    MMN Bina Sdn Bhd
    THE PROPOSED CONSTRUCTION AND COMPELTION OF MAIN
    INFRASTRUCTURE WORK FOR PAHANG TECHNOLOGY PARK IN GAMBANG,
    PAHANG DARUL MAKMUR FOR EAST COAST REGION ECONOMIC REGION
    DEVELOPMENT COUNCIL.

    METHOD STATEMENT – DRAINAGE WORK

    and again on completion of the Contract. If the drains do not pass the test or are found
    to be out of alignment the whole of the defective length shall be taken out and re-laid
    or replaced at the Contractor’s expense and the drains re-tested until they are
    satisfactory.

    6.0 INSPECTION AND TESTING

    All rubbish particularly earth, mud, wood chipping, shaving and sawdust, shall be
    removed from the steel reinforcement before concrete is placed and the formwork to
    be in contact with the concrete shall be cleaned and either thoroughly wetted.

    Note : Care should be taken that the oil or composition is kept out of contact with the
    reinforcement.

    7.0 SAFETY PLAN

    The safety for application of this work shall comply with NSD’S Health, Safety
    Environment Manual. All basic requirements for personnel will be check prior to
    work.

    You might also like