The document provides instructions for turning off DPF and FAP functions for various vehicle control units, including EDC16C34 PSA, EDC15C2 PSA, EDC16 VAG, VAG 3.0 TDI, EDC17 VAG, EDC17 BMW, and EDC17CP4 AUDI A4. It describes finding specific byte strings in the engine control unit program and changing the values at those locations to disable DPF and FAP controls.
100%(13)100% found this document useful (13 votes)
4K views15 pages
The document provides instructions for turning off DPF and FAP functions for various vehicle control units, including EDC16C34 PSA, EDC15C2 PSA, EDC16 VAG, VAG 3.0 TDI, EDC17 VAG, EDC17 BMW, and EDC17CP4 AUDI A4. It describes finding specific byte strings in the engine control unit program and changing the values at those locations to disable DPF and FAP controls.
The document provides instructions for turning off DPF and FAP functions for various vehicle control units, including EDC16C34 PSA, EDC15C2 PSA, EDC16 VAG, VAG 3.0 TDI, EDC17 VAG, EDC17 BMW, and EDC17CP4 AUDI A4. It describes finding specific byte strings in the engine control unit program and changing the values at those locations to disable DPF and FAP controls.
The document provides instructions for turning off DPF and FAP functions for various vehicle control units, including EDC16C34 PSA, EDC15C2 PSA, EDC16 VAG, VAG 3.0 TDI, EDC17 VAG, EDC17 BMW, and EDC17CP4 AUDI A4. It describes finding specific byte strings in the engine control unit program and changing the values at those locations to disable DPF and FAP controls.
N PSA 3D MAP The 16 bit map view does not search for WinOls.
O S S P
A set of FAP / DPF switches
TEXT MAP
View 8 bit HEX
A L G
5 [email protected] You can manually search by finding a set (string) for EGR OFF 01 01 00 00 01 00 01 00 01 30
N Immediately after this string follows the address of the FAP / EGR map off, the map parameters have been highlighted in blue.
O S S We're breaking the columns up to 10. We enter our found address to the edge of the view. Then vertically select 18 lines and click on the "K" keyboard. And we get a map FAP / DPF After opening the map, we set its parameters. P A L G
DPF off is done by applying the value from the tracing paper shown at the beginning. 8 bit HEX mode
6 [email protected] It can also be done more easily by making changes to the entire batch according to the following: We set our winols image as 8bit and HEX
N We search for a string of characters from EGR as above.
01 01 00 00 01 00 01 00 01 30
We set it as below and apply changes.
O S S P
We check the check sum.
A
Of course, if we want to do it manually .... :))
The ECUSafe program will do this perfectly for us. L G
N VAG In the VAG group EDC16 controllers, all you have to do is search for a string and switch off the DPF with the switch, just like in EDC16c34 in the PSA group.
O For example: edc16 03G 906 056 sw 395446 touran 1.9 105hp
N O As you can see above, it's a DPF driver S S For comparison, below is the charge of the PASSAT driver without DPF 03G906021LR sw 380420 This is also the sequence here but there is no 1 at the end of it !! P A L G
N Here the case looks like the above with a small difference The string is similar but the section to the switch is shorter From the characters 7F FF 80 You should also pay attention to the other two lines because the same 7F FF 80 can be in the charge more - and the determinant which is the string will be all lines visible
N VAG In the EDC17 controllers of the VAG group, all you have to do is search for a string and switch off the DPF by means of the switch, similar to EDC16c34 in the PSA and EDC16
O VAG groups. The search string is: A0 0F 01
S S P
After 6 bytes you can see two switches 01 01
A L G
FAP OFF 00 00
11 [email protected] We have FAP maps for this set We have FAP maps for this set
