Scribd
Upload
79 views2 pages

Doubly Reinforced Beam

This document summarizes the design of a reinforced concrete beam labeled RB1 according to IS 456-2000. Key details include: - The beam is 380mm wide and 347mm deep with 20 MPa concrete and 500 MPa steel reinforcement. - The beam shear and moment capacities were calculated and the beam was determined to be doubly reinforced. Longitudinal and shear reinforcement amounts and spacing were designed. - 5Y20 steel bars were specified as the tensile reinforcement and 2Y16 bars as the compressive reinforcement. 8mm diameter stirrups at 150mm spacing were selected for shear reinforcement. - Serviceability checks for deflection were performed and confirmed the design was adequate with an actual to

Uploaded by

G.Dhanabal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
79 views2 pages

Doubly Reinforced Beam

This document summarizes the design of a reinforced concrete beam labeled RB1 according to IS 456-2000. Key details include: - The beam is 380mm wide and 347mm deep with 20 MPa concrete and 500 MPa steel reinforcement. - The beam shear and moment capacities were calculated and the beam was determined to be doubly reinforced. Longitudinal and shear reinforcement amounts and spacing were designed. - 5Y20 steel bars were specified as the tensile reinforcement and 2Y16 bars as the compressive reinforcement. 8mm diameter stirrups at 150mm spacing were selected for shear reinforcement. - Serviceability checks for deflection were performed and confirmed the design was adequate with an actual to

Uploaded by

G.Dhanabal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Project: KMP Doc no:

Client: Rev no: A Date: 21-08-2019


BEAM DESIGN
IS 456-2000
Beam no: RB1
Input datas:
b = 380 mm d = 347 mm
2
D = 380 mm fck = 20 N/mm
2
Bottom c' = 25 mm fy = 500 N/mm
Top d' = 25 mm
Design:
Mu lim. = 121.709 kNm
Longitudinal rft:
Tensile rft:
Mu = 272 kNm
Doubly-reinforced.
Mu add = 150.291 kNm
xu max/d = 0.46
xu max = 159.62 mm
Ast1 = 1003.96 mm2
d' = 25 mm
ϕbt = 20 mm
d-d' = 312 mm
2
Ast2 = 1107.36 mm
2
Total Ast = 2111.32 mm
Nreq = 6.721
Nprov = 5
2
Ast prov = 1570.8 mm
pt prov. = 1.191 %
Provide 5Y20 as tensile rft.
Compressive rft:
ξsc = 0.003
2
fsc = 352 N/mm
2
Asc = 1368.47 mm
ϕbc = 16 mm
Nreq = 6.806
Nprov = 2
2
Asc prov = 402.125 mm
pc = 0.305 %
Provide 2Y16 as compressive rft.
Shear rft:
Vu = 453 kN
2
τv = 3.435 N/mm
pt = 1.191 %
β = 1
√0.8fck = 4
√(1+5β)-1 = 1.449
2
τc = 1.306 N/mm
2
τc max = 3.578 N/mm
Provide design shear rft.
Assume 4 legged 8 mm dia stirrups.
2
Asv = 201.062 mm
Vus = 280.73 kN
Shear rft spacing as per
Sv min = 575.408 mm
Sv des = 108.109 mm
Sv max = 260.25 mm
Sv req = 108.109 mm
Sv prov = 150 mm
Provide 4legged Y8 stirrups at 150mm c/c.
Deflection check:
δact = 0.5 mm
L = 5.9 m
δall = 16.857 mm
Hence safe.
(l/d)basic = 20
Kl = 1
2
Ast req = 361.03 mm
2
Ast prov = 402.43 mm
2
fs = 390.249 N/mm
pt = 0.51 %
K2 = 1.4
(l/d)final = 28
(l/d)actual = 17.003
Hence safe.

You might also like