Scribd
Upload
188 views1 page

Lead Acid Battery Charger MODEL DY 1616 (16V/16A) : Auto Charger - Dyna Master

This document provides specifications for the Dyna Master Model DY 1616 lead acid battery charger. The charger has an input voltage range of 150-275V AC, outputs 12-16V at 4-16A, and has an efficiency of 85%. It is suitable for charging batteries from 32-200AH and incorporates latest charging algorithms. Protections include over voltage, over current, reverse polarity, and short circuit protections. It has LED indicators for charge status and a digital display to monitor current and voltage. The charger weighs 3.3kg, has IP-20 enclosure, and operates from 0-50°C.

Uploaded by

ismail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
188 views1 page

Lead Acid Battery Charger MODEL DY 1616 (16V/16A) : Auto Charger - Dyna Master

This document provides specifications for the Dyna Master Model DY 1616 lead acid battery charger. The charger has an input voltage range of 150-275V AC, outputs 12-16V at 4-16A, and has an efficiency of 85%. It is suitable for charging batteries from 32-200AH and incorporates latest charging algorithms. Protections include over voltage, over current, reverse polarity, and short circuit protections. It has LED indicators for charge status and a digital display to monitor current and voltage. The charger weighs 3.3kg, has IP-20 enclosure, and operates from 0-50°C.

Uploaded by

ismail
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

www.dynahitech.

com

LEAD ACID BATTERY CHARGER


AUTO CHARGER - DYNA MASTER
MODEL DY 1616 (16V/16A)

ELECTRICAL SPECIFICATIONS
INPUT SPECIFICATIONS
Nominal Voltage 230V AC, 50Hz 1 
Voltage Range 150 – 275V AC
Frequency 47 – 53 Hz
Input Current 2A RMS
Efficiency 85% (TYP.)
Dielectric Strength 1.5KV AC (I/p TO O/P AND CASE)

OUTPUT SPECIFICATIONS
Nominal Voltage 12V
Output Voltage 12V - 16V
Output Current 4A-16A ADJUSTABLE (AS PER BATTERY RATING)
Power 250 Watts
Net Regulation  0.5V
Ripple + Noise < 100mV
Over Voltage Protection 102% Max of Output
Over Load Protection Fold back type
Short Circuit Protection Provided with Auto Recovery

SPECIAL FEATURES

 Advanced high frequency SMPS design charger with 80% typical efficiency
 Suitable for charging Battery Range – 32AH TO 200AH.
 Helical Potentiometer for current selection as per Battery Capacity.
 Wide range of AC input (150V – 275 VAC)
 Latest Battery charge algorithms for quick and accurate charging increases Battery Life
 Protection provided for Output Reverse Polarity & Output Short Circuit

LED INDICATIONS MONITORING DISPLAY

LED’s Provided For :


CHARGE ON - YELLOW Digital Meter For Current (Normal), Voltage with Push Button.
CHARGE OVER - GREEN

MECHANICAL ENVIRONMENT & SAFETY

Weight 3.3 Kg. Operating Temperature 0º to 50º C


Dimensions 205(H) X 121(W) X 140(D)mm Storage Temperature -10º C to +70º C
Enclosure IP-20,CRC Sheet, Powder coated Cooling Convection
Case, Wall Mounting /Table Top Humidity < 95% RH
Input & output 2 meters Cable, 3 pin Plug for Input EMI/ EMC Designed to meet CISPR22 Class A / IEC 61000-4
Connection Safety Designed to meet IEC 60950

Specification No - CLAB/ DY1616- (Rev. 0)


* Enhancement to the above specifications & Customizing can be considered on request.
* Specifications may or can be altered without notice as per company’s continuous improvement Program.

You might also like