Scribd
Upload
445 views2 pages

IOT Based Automatic Vehicle Accident Detection and Rescue System

This document describes an IOT-based automatic vehicle accident detection and rescue system that uses an accelerometer sensor and GSM module to detect accidents and send location information to emergency responders. When an accident is detected, the microcontroller sends an alert message through the GSM module including the location. This allows emergency teams to immediately trace the location and take action, reducing response times and saving lives. The system is powered by an Atmega 328 microcontroller and includes components like an accelerometer sensor, GSM module, and display.

Uploaded by

sampathabo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
445 views2 pages

IOT Based Automatic Vehicle Accident Detection and Rescue System

This document describes an IOT-based automatic vehicle accident detection and rescue system that uses an accelerometer sensor and GSM module to detect accidents and send location information to emergency responders. When an accident is detected, the microcontroller sends an alert message through the GSM module including the location. This allows emergency teams to immediately trace the location and take action, reducing response times and saving lives. The system is powered by an Atmega 328 microcontroller and includes components like an accelerometer sensor, GSM module, and display.

Uploaded by

sampathabo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

IOT Based Automatic Vehicle Accident Detection and

Rescue System
The rapid rise of technology and infrastructure has made our lives easier. The high
demand of automobiles has also increased the traffic hazards and road accidents.
Life of the people is under high risk. The delay in reaching of the ambulance to the
accident location and the traffic congestion in between accident location and
hospital increases the chances of death of the victim. To overcome this problem
our automatic ambulance rescue system comes to the rescue. This proposed IOT
based accident detection system helps to reduce the loss of life due to accidents
and also reduces the time taken by the ambulance to reach the hospital. To detect
the accident there is accelerometer sensor present in this rescue system and the
GSM module included sends messages about the location to the respective
guardian and rescue team. With the help of accelerometer sensor signal, a severe
accident due to an obstacle can be recognized. Microcontroller used, sends the
alert message through the GSM module including the location to guardian or a
rescue team. So, the emergency help team can immediately trace the location
through the GPS module, after receiving the accident location information, action
can be taken immediately. This accelerometer based accident detection system is
powered by Atmega 328 microcontroller it consists of display, accelerometer
sensor, GSM module and alarm. This automatic ambulance rescue system project
is useful in detecting the accident.

Block Diagram:
 Hardware Specifications

 Atmega 328 Microcontroller

 GSM Modem

 Accelerometer Sensor

 Wifi modem

 Crystal Oscillator

 Resistors

 Capacitors

 Transistors

 Cables and Connectors

 Diodes

 PCB and Breadboards

 LED

 Transformer/Adapter

 Push Buttons

 Switch

 IC

 IC Sockets

You might also like