Features: Pin Configuration • Halogens free 1. Anode (Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm) 2. Cathode • Current transfer ratio 3. Emitter (CTR: 50~600% at IF =5mA, VCE =5V) 4. Collector • High isolation voltage between input and output (Viso=3750 V rms ) • Compact 4 Pin SOP with a 2.0 mm profile • Compliance with EU REACH • Pb free and RoHS compliant • UL and cUL approved (No. E214129) • VDE approved (No. 132249) • SEMKO approved • NEMKO approved • DEMKO approved • FIMKO approved
Description
The EL357N-G series contains an infrared emitting diode, optically coupled to a phototransistor detector.
The devices in a 4-pin small outline SMD package.
Applications • DC-DC Converters • Programmable controllers • Telecommunication equipments • Signal transmission between circuits of different potentials and impedances
Input Parameter Symbol Min. Typ. Max. Unit Condition
Forward voltage VF - 1.2 1.4 V IF = 20mA
Reverse current IR - - 10 µA VR = 4V
Input capacitance Cin - 30 250 pF V = 0, f = 1kHz
Output
Parameter Symbol Min Typ. Max. Unit Condition
Collector-Emitter dark ICEO - - 100 nA VCE = 20V, IF = 0mA current Collector-Emitter BVCEO 80 - - V IC = 0.1mA breakdown voltage Emitter-Collector BVECO 7 - - V IE = 0.01mA breakdown voltage
Transfer Characteristics (Ta=25°C unless specified otherwise)
Parameter Symbol Min Typ. Max. Unit Condition
EL357N 50 - 600
EL357NA 80 - 160
EL357NB 130 - 260
Current Transfer EL357NC CTR 200 - 400 % IF = 5mA ,VCE = 5V ratio EL357ND 300 - 600
EL357NE 100 - 200
EL357NF 150 - 300
Collector-Emitter VCE(sat) - 0.1 0.2 V IF = 20mA ,IC = 1mA saturation voltage 10 VIO = 500Vdc, Isolation resistance RIO 5×10 - - 40~60% R.H. Floating capacitance CIO - 0.6 1.0 pF VIO = 0, f = 1MHz Rise time tr - 3 18 VCE = 2V, IC = 2mA, µs Fall time tf - 4 18 RL = 100
EL denotes Everlight 357N denotes Device Number R denotes CTR Rank Y denotes 1 digit Year code WW denotes 2 digit Week code V denotes VDE approved (optional)
1. Soldering Condition 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile
Note: Reference: IPC/JEDEC J-STD-020D
Preheat Temperature min (Tsmin) 150 °C Temperature max (Tsmax) 200°C Time (Tsmin to Tsmax) (ts) 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3 °C/second max
Other Liquidus Temperature (TL) 217 °C Time above Liquidus Temperature (t L) 60-100 sec Peak Temperature (TP) 260°C Time within 5 °C of Actual Peak Temperature: TP - 5°C 30 s Ramp- Down Rate from Peak Temperature 6°C /second max. Time 25°C to peak temperature 8 minutes max. Reflow times 3 times
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.
