100% found this document useful (1 vote)
924 views3 pages

Huawei Mux and Card Details and Procedure To Upload New Ne Into Huawei NMS

Download as docx, pdf, or txt
Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1/ 3

HUAWEI MUX AND CARD DETAILS

1) OSN 1832/X8 (NE)

a) 2-SL1Q Card: -2 STM1 Port


b) 3-SP3D Card: -42 E1 Ports
c) 4-SL1Q Card: -4*STM1 Optical Interface Board
d) 5-SL4D Card: -2*STM4 Optical Interface Board
e) 6-SL4D Card: -2*STM4 Optical Interface Board
f) 7-SL16S Card: -STM16 (1 Port)
g) 8-SL16S Card: -STM16 (1 Port)
h) 9-PEX1-Power Card

2) OSN-1832/X16 (NE):-STM16 Connectivity

a) 3-SP3D Card: - 42 E1 Ports


b) 8-EGS4 Card: - 4 Gig ports
c) 11-SLNO Card: - 8*STM1/STM4 OR 4*STM-16 Optical
Interface Board
d) 12-SLNO Card: - 8*STM-1/STM4 OR 4*STM-16 Optical
Interface Board

3) OSN 500

a) SL1D Card: - 2*STM-1 Optical Interface Board


b) EFT 8 Card: - 3 Fast Ethernet Transparent Transmission
Board
c) SL4D Card: - 2*STM-4 Optical Interface Board
d) SP3S Card: - 21 E1 Ports
4) OSN-550

a) EFS 8 Card: - 8 port 10/100 Base-T Ethernet Switching


Processing Board

5) OSN-7500

a) N3SLH41 Card: - 16*STM-4/STM-1 Optical Interface


Board
b) N4SLQ16 Card: - 4*STM-16 Optical Interface Board
c) N4SL016 Card: - 8*STM-16 Optical Interface Board
d) N4SLD64 Card: - 2*STM-64 Optical Interface Board
e) N1PSXCS Card: - Cross connect Card
f) N3SLH41 Card: - 16*STM-4/STM-1 Optical interface
Board
g) N4EGS4 Card: - GE transit ethernet board

***Process of how to upload New ‘NE’ into Huawei NMS***

Below input required from Planning Team: -

1) Stack of NE
2) NE ID
3) Extended ID
4) Name of NE
5) Gateway Type:-(Non-Gateway or Gateway)
6) Gateway NE Name
7) Create the DCC in the existing Node.
8) Ping the New node from the existing node.
9) Go to NMS, Right Click-New-NE & fill the above details
and upload it.

You might also like