Technical Specifications: A. General Characteristics

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Jakarta - Indonesia

TECHNICAL SPECIFICATIONS
Joint venture between AREVA TD - PLN

A. GENERAL CHARACTERISTICS
Design standars : IEC 76
Transformer type : Hermetically Sealed Totally Oil Filled
Service Condition : Outdoor
Type of oil : Mineral Oil Class 1 acc. to IEC 296
Number of phase : 3 Phase
Frequency : 50 Hz
B. TECHNICAL SPECIFICATION
Capacity : 250 kVA
Primary Voltage : 20 kV
Secondary Voltage : 0.4 kV
Vector Group : Dyn5
Cooling : ONAN
Temperature Rise - Oil : 50 oC
- Winding : 55 oC
No load losses at nominal voltage : 600 Watts
On load losses at principal tapping : 3000 Watts
Impedance voltage : 4 %
Off load current at nominal voltage : 2.1 %
Temperature Insulation Class : A
Noise : 55 dB
Off Circuit Tapping value : +/-5%;+/-10%
C. INSULATION CLASS OF THE WINDINGS Primary Secondary
Highest system voltage (kV) : 24 1.1
Impulse test voltage (kV) : 125 0
Applied test voltage (kV) : 50 3
D. EFFICIENCY AND VOLTAGE REGULATION
Efficiency ( % ) Voltage Regulation
4/4 load 3/4 load 2/4 load 1/4 load in Volt in %
Pf 0.8 98.23 98.50 98.67 98.45 387 3.28
Pf 1.0 98.58 98.79 98.93 98.76 395 1.27
E. APPROXIMATE WEIGHTS AND DIMENSION
Total length : 1,420 mm
Total width : 820 mm
Total height : 1,435 mm
Weight of oil : 275 kg
Weight of core and winding : 550 kg
Total weight : 1,115 kg
Approximate Drawing No. :
Painting Colour : Light Grey RAL 7032
The above dimensions and masses are approximate and provided to give a general description of our proposed
transformer.
Revision Original Client / Project:
No : D 1156
Date 21-Jun-05
STANDARD PLN 250 KVA Page 1/2
Est. BUD :

Chk
App.
Jakarta - Indonesia

TECHNICAL SPECIFICATIONS
Joint venture between AREVA TD - PLN

F. ACCESSORIES
- Name Plate and Rating Plate
- HV and LV Porcelain Bushings
- Off Circuit Tap Changer
- Oil Filling Plug
- Oil Draining Valve
- Lifting Lugs
- Grounding Terminal
- Bidirectional Rollers
- Pressure Relief Device Without Contact
- Oil Level and Thermometer Without Contact

G. DEVIATIONS / EXCEPTIONS
- None

H. NOTES
- None

I. LIST OF TEST
Routine Test : Yes No
- Measurement of the resistance value and checking of polarities : √
- Measurement of the ratio on all taps : √
- No load test for measurement of the no load loss and no load current : √
- Short circuit test for determination of the on load loss and impedance : √
- Applied voltage test : √
- Induced voltage test : √

Type test :
- Temperature rise test : √
- Full wave impuls test ( 1.2 / 50 us ) : √

Tests other than the above mentioned list needs further confirmation
Revision Original Client / Project:
No : D 1156
Date 21-Jun-05
STANDARD PLN 250 KVA Page 2/2
Est. BUD :

Chk
App.

You might also like