Contents

Preface 1
1. Features 2
2. Facilities and Location 4
3. OCTG Line Up 5
4. Manufacturing Process 6
5. Available Grades and Sizes 10
6. Specification of JFE-Series-JFE Special OCTG 18
7. Premium Threaded Connections 31
8. Marking 33
9. Color Identification of JFE OCTG (JFE-Series) 34
10. Thread Protectors and Packaging 35
11. Inquiries and Orders 36

Legal Notice
This catalog is edited for general information only. Although every possible
effort is made to maintain the accuracy and reliability of the contents of this
publication, JFE Steel Corporation in no ways assumes liability or for any
loss, damage or injury resulting from the use of the information and data
herein. It is requested to be undertaken solely at the customer's own risk
and responsibility.
 Preface

Steel Corporation has been manufacturing Oil Country

Tubular Goods (OCTG) since 1971, during that time we have accumu-

lated extensive expertise and experience giving their customers great

confidence and satisfaction when purchasing JFE Steel OCTG.

In the past the well conditions in Oil and Gas drilling were relatively mild

and development was straight-forward. Today's Oil and Gas Industry has

become a much more complicated operation as Engineers continue to drill

deeper wells in harsher environments, encountering higher well bore

pressures and temperatures in addition to sweet and sour gas.

To meet these ever increasing industry demands, JFE has developed

its JFE series OCTG which has higher collapse resistance, yield strength,

toughness and corrosion resistance, than standard API OCTG material.

Especially, JFE's 13Cr OCTG has established an excellent reputation

world-widely in terms of quality and manufacturing capability.

TM
In the early 1980s, JFE developed the FOX premium connection

which has now gained industry acceptance world wide. And the late 1990s,
TM
JFE has also developed a new premium connection called JFEBEAR

designed to meet todays toughest well condition. With these two

connections, JFE can offer customers a choice of products to suit their

various applications.

This OCTG brochure provides you with our ardent desire to assist you

in choosing the correct Oil Country Tubular Goods for your operation.

1
 1. Features

Historical Advantage in Steel Making

JFE Steel has been involved in the steel making
business nearly one(1) hundred years and contributing
to the industry with its technology. The Top and Bottom
Gas Blowing system followed by Continuous Casting is
a typical case, which was first introduced to the indus-
try by JFE Steel.

High Frequency E. R. W. Machine

Quality System
All JFE OCTG's are inspected nondestructively for
detection of internal and external imperfections by use
of Eddy Current, Electromagnetic, Ultrasonic and/or
Basic Oxygen Furnace
Magnetic Particle method. These requirements play
an important role in our rigid quality control and
assurance system.
Pipe Manufacturing
JFE Steel revealed their technical advancement in the
pipe manufacturing process. Recently, the process to
roll 13Cr steel by the Mannessman piercing mill was
realized first in JFE Steel.

9-5/8" CNC Torque Process Control System

Mandrel Mill

2
Research and Development
JFE Steel boasts a wide range of testing facilities and
equipment to evaluate new and existing products.
The benefits generated as a result of this R & D work
contribute to our customers and the industry as well
as to our daily production activities.

Magnetic Particle Inspection

Collapse Test

Worldwide Service Network

JFE has established foreign offices and service
centers throughout the world as listed on the back
cover sheet.

Electromagnetic Inspection

3
 2. Facilities and Location
OCTG is produced at Chita Works, which JFE Steel ensures consistently high quality for all
specializes in pipe and tubes under the company's its tubular products by way of production control at
well-known rigid quality control and assurance every stage from blast furnace to pipe mill, using
systems. inspection systems with advanced ultrasonic,
Equipped with complete mass production systems for electromagnetic and other non-destructive inspection
all kinds of pipe and tubular products, Chita is one of equipment. Pipe production at JFE Steel is part of a
the foremost tubular products centers in the world. fully integrated steelmaking facility. This means JFE
The location of Chita has the advantage of easy tubular products are manufactured from beginning to
access to West Japan Works and East Japan Works end under single-maker responsibility for quality and
which supplies Chita Works with steel materials for performance.
the production of their tubular products.

Chita Works located in the center of the Kinu-ura coastal industrial zone

Tomei Expressway
Nagoya

Tokaido Shinkansen
Ohbu
Tokaido Main Line
Tokyo Head Office
Handa
Central Japan Chita Works
International Taketoyo
Airport Toyohashi
East Japan Works Kinu-ura Bay
Mikawa Bay
Chita Works Ise Bay Morozaki

Cape Irago
West Japan Works

4
 3. OCTG Line up
1) Line up
Type of String Size Mill Works Note
Thread and Coupling
Tubing 2-3/8" - 7" Small-Diameter Seamless Chita Works
End Upset Capability

4-1/2" - 7" Small-Diameter Seamless

Chita Works Thread and Coupling
7" - 16" Medium-Diameter Seamless
Casing
Chita Works
7-5/8" - 26" ERW Plain End
East Japan Works

16" Medium-Diameter Seamless

Chita Works
16" - 26" ERW Plain End without
Conductor Casing
20" and Over UOE West Japan Works welded-on Connector

2) Connections
a. API Connections
Casing and tubing of API Specification and JFE-Series are furnished with threads and coupling conforming to
API Spec. 5CT and 5B. API Round and Buttress thread with resilient sealing ring is also available. Plain End,
API thread without coupling, and special end finish (special bevel, special clearance) are available according
to customers' requirement.

b. Premium Connections
b-1. FOXTM
FOXTM is a thread and coupling type premium connection jointly developed by JFE Steel Corporation and
Hunting Energy Services U.K. LTD. Please see page 31 for further information.
b-2. JFEBEARTM
JFEBEARTM is a thread and coupling type premium connection developed by JFE Steel Corporation. Please
see page 32 for further information.

5
 4. Manufacturing Process

Seamless Mill Electric Resistance Weld (ERW) Mill

Seamless pipes and tubes are produced either by Electric Resistance Weld pipes are made from strip
the mandrel mill or the plug rolling mill process. The in coil form. 12-3/4" and above Mill in Chita Works
former process is used for producing small-diameter and 8" and above Mill in East Japan Works produce
pipes up to 7" and the latter for medium-diameter ERW OCTG pipes.
pipes over 7". On either type of mill, each heated These mills are equipped with high frequency electric
billet is pierced through its center on a piercing mill. resistance welder to provide improved seam quality.
The pierced billet then moves on to a mandrel or plug And seam heat treatment system after welding helps
rolling mill where it is rolled with a mandrel bar or plug to get better metallurgical structure.
inserted in it. After withdrawal of the mandrel or the
plug, the rolled shell is reheated before being pro-
cessed on stretch reducing mill or sizing mill where
the desired OD and wall thickness are obtained. To
ensure consistently high quality, the company con-
ducts thorough testing and inspection, using
advanced equipment including eddy current,
ultrasonic, electro- magnetic and magna flux devices.

East Japan Works

West Japan Works Bloom Billet
Billet mill

High alloy slab

Smelting reduction furnace
Continuous casting

Stainless mill Stainless

steel coil

Blast furnace

Hot coil
Hot strip mill

Converter Slab
Continuous casting

Hot coil

Plate
6
Chita Works
Hot process Cold process
[Seamless pipes]
Medium diameter
Medium diameter seamless pipe
seamless pipe mill
Seamless square
column
Small diameter Small diameter
seamless pipe mill seamless pipe
Special
Tube mill Special Tube

[Welded pipes]
Galvanized
pipe mill Galvanized pipe
3″
、6″
mill
Small diameter
Small diameter ERW pipe
ERW pipe mill TM
4″
mill
HISTORY pipe

Medium diameter
Medium diameter ERW pipe
ERW pipe mill
Square column

Butt welded pipe mill (East Japan Works)

Spiral tube mill (East Japan Works)

UOE pipe mill (West Japan Works)

7
 SEAMLESS MILL
Mandrel Mill
7" Mill
(Mandrel Mill)
Rotary Heating Furnace Piercing A
Round Billet
Elongator Plug Mill

B
163/4" Mill
(Plug Mill)

Stretch Reducing
Reheating
A Furnace

Quenching
Reeling Sizing C

B D

Straightening E
Heat
C Treatment
F
Upsetting Sizing
D

E Casing
Fabrication
NDE Visual & Dimensional
F (UST,MPI,EMI) Inspection
Tubing
Straightening Fabrication

Casing Threading Coupling Making up Hydrostatic Testing

Plain End
Tubing
Unprocessed Pipes
G

Drill Pipe
H
Casing
Drift Testing
Tubing
G
Inspection, Stenciling,
Coating

H Drill Pipe

8
 Electric Resistance Weld (ERW) Mill

24-in. ERW Mill

Hot Rolled Coil Welding
Pre Forming Roll Forming (Inside & Outside Flash Triming)
Edge Milling

No.1 Seam Cooling

Ultrasonic Inspection Post Annealing Sizing Cutting
(Mill Control)
Hydrostatic Testing
1 2

No.2 Seam Full Body Ultrasonic

Ultrasonic Inspection Inspection(Option) Facing & Chamfering
Visual & Weighting
2 Dimensional & 3
Inspection Measuring

3 Marking Shipping
(& Coating)

26-in. ERW Mill

Hot Rolled Coil Welding
(Inside & Outside Flash Triming)
Edge Milling Cage Forming

Seam Ultrasonic Inspection Cooling

Post Annealing Sizing Cutting
(Mill Control)
Hydrostatic Testing
1 2

Full Body Ultrasonic

Inspection(Option)
Seam Ultrasonic Inspection Facing & Chamfering
Visual & Weighting
2 Dimensional & 3
Inspection Measuring

Marking
3 (& Coating)
Shipping

9
 5. Available Grades and Sizes
1) Available Grades
API 5CT

Yield Strength Seamless ERW

Minimum High
psi (MPa) Group Group Group Group Group Group Deep Well Collapse
1 2 3 4 1 2 Service Strength

40,000 ( 276) H40 H40

J55 J55
55,000 ( 379)
K55 K55

65,000 ( 448) M65

N80/Type1 L80/Type1 N80/Type1 L80/Type1 JFE-80T

80,000 ( 552)
N80/TypeQ L80/13Cr

85,000 ( 586)

90,000 ( 621) C90/Type1

R95 T95/Type1 R95 JFE-95T

95,000 ( 655)

C110 P110 JFE-110T

110,000 ( 758)

125,000 ( 862) Q125/Type1 JFE-125V

140,000 ( 965) JFE-140V

10
 JFE Special OCTG : JFE-Series
Seamless ERW
Sour Service Wet CO2 Service
High
Arctic General
High High High Strength Collapse
General Special Service General Service Strength
Collapse Temperature High Temperature

JFE-40E

JFE-55E

JFE-80S JFE-80TS JFE-80L JFE-13CR-80 JFE-80E JFE-80ET

JFE-85S JFE-85SS JFE-13CR-85

JFE-90S JFE-90SS

JFE-95S JFE-95SS JFE-95TS JFE-95L JFE-13CR-95 JFE-HP1-13CR-95

JFE-HP2-13CR-95

JFE-110S JFE-110SS JFE-110L JFE-HP1-13CR-110

JFE-HP2-13CR-110

TM
JFE-125L JFE-UHP -15CR-125

11
 5. Available Grades and Sizes
2) Physical Properties of API and JFE-Series
Yield Strength Tensile Strength
Series Application Grade Type Minimum Maximum Minimum
psi (MPa) psi (MPa) psi (MPa)
H40 40,000 ( 276) 80,000 ( 552) 60,000 ( 414)
J55 55,000 ( 379) 80,000 ( 552) 75,000 ( 517)
K55 55,000 ( 379) 80,000 ( 552) 95,000 ( 655)
Group 1
N80 1 80,000 ( 552) 110,000 ( 758) 100,000 ( 689)
Q 80,000 ( 552) 110,000 ( 758) 100,000 ( 689)
R95 95,000 ( 655) 110,000 ( 758) 105,000 ( 724)
M65 65,000 ( 448) 85,000 ( 586) 85,000 ( 586)
API
L80 1 80,000 ( 552) 95,000 ( 655) 95,000 ( 655)
13Cr 80,000 ( 552) 95,000 ( 655) 95,000 ( 655)
Group 2
C90 1 90,000 ( 621) 105,000 ( 724) 100,000 ( 689)
T95 1 95,000 ( 655) 110,000 ( 758) 105,000 ( 724)
C110 110,000 ( 758) 120,000 ( 828) 115,000 ( 793)
Group 3 P110 110,000 ( 758) 140,000 ( 965) 125,000 ( 862)
Group 4 Q125 1 125,000 ( 862) 150,000 (1,034) 135,000 ( 931)
JFE-80T 80,000 ( 552) 110,000 ( 758) 100,000 ( 689)
High Collapse
JFE-95T 95,000 ( 655) 125,000 ( 862) 110,000 ( 758)
Strength
JFE-110T 110,000 ( 758) 140,000 ( 965) 125,000 ( 862)
JFE-80S 80,000 ( 552) 95,000 ( 655) 95,000 ( 655)
JFE-85S 85,000 ( 586) 100,000 ( 689) 95,000 ( 655)
Sour Service JFE-90S 90,000 ( 621) 105,000 ( 724) 100,000 ( 689)
JFE-95S 95,000 ( 655) 110,000 ( 758) 105,000 ( 724)
JFE-110S 110,000 ( 758) 125,000 ( 862) 120,000 ( 828)
JFE-85SS 85,000 ( 586) 100,000 ( 689) 95,000 ( 655)
Special JFE-90SS 90,000 ( 621) 105,000 ( 724) 100,000 ( 689)
Sour Service JFE-95SS 95,000 ( 655) 110,000 ( 758) 105,000 ( 724)
JFE-110SS 110,000 ( 758) 125,000 ( 862) 120,000 ( 828)
Sour Service & JFE-80TS 80,000 ( 552) 95,000 ( 655) 100,000 ( 689)
High Collapse JFE-95TS 95,000 ( 655) 110,000 ( 758) 105,000 ( 724)
JFE-80L 80,000 ( 552) 95,000 ( 655) 95,000 ( 655)
JFE-95L 95,000 ( 655) 125,000 ( 862) 110,000 ( 758)
Arctic Service
JFE-Series JFE-110L 110,000 ( 758) 140,000 ( 965) 125,000 ( 862)
JFE-125L 125,000 ( 862) 150,000 (1,034) 135,000 ( 931)
JFE-125V 125,000 ( 862) 150,000 (1,034) 135,000 ( 931)
Deep Well Service
JFE-140V 140,000 ( 965) 170,000 (1,172) 150,000 (1,034)
JFE-13CR-80 80,000 ( 552) 95,000 ( 655) 95,000 ( 655)
Wet CO2 Service JFE-13CR-85 85,000 ( 586) 100,000 ( 689) 100,000 ( 689)
JFE-13CR-95 95,000 ( 655) 110,000 ( 758) 105,000 ( 724)
JFE-HP1-13CR-95 95,000 ( 655) 110,000 ( 758) 105,000 ( 724)
High Temperature JFE-HP1-13CR-110 110,000 ( 758) 130,000 ( 896) 120,000 ( 828)
Wet CO2 Service JFE-HP2-13CR-95 95,000 ( 655) 110,000 ( 758) 105,000 ( 724)
JFE-HP2-13CR-110 110,000 ( 758) 130,000 ( 896) 120,000 ( 828)
High Strength TM
High Temperature JFE-UHP -15CR-125 125,000 ( 862) 150,000 ( 1034) 135,000 ( 931)
Wet CO2 Service
JFE-40E 40,000 ( 276) 80,000 ( 552) 60,000 ( 414)
General Service JFE-55E 55,000 ( 379) 80,000 ( 552) 75,000 ( 517)
JFE-80E 80,000 ( 552) 110,000 ( 758) 100,000 ( 689)
High Collapse Strength JFE-80ET 80,000 ( 552) 110,000 ( 758) 100,000 ( 689)
12 Note:Elongation Requirement is according to API 5CT Specification.
 Manufacturing Hardness Charpy V-notch Test
Collapse Other Specified
Process (HRC) Minimum Minimum
Value F ( C) Average single Items
Seamless ERW Maximum Variation ft-lbs (J)

22
23
23
25.4 3.0-6.0 Grain Size & SSC Test
25.4 3.0-6.0 Grain Size & SSC Test
30 3.0-6.0 Grain Size & SSC Test

3.0-5.0
Guaranteed
Guaranteed
Guaranteed
22
23
24
25
31
23 3.0-5.0 Grain Size & SSC Test
24 3.0-5.0 Grain Size & SSC Test
25 3.0-5.0 Grain Size & SSC Test
31 3.0-5.0 Grain Size & SSC Test
22
25
-50 (-46) 25 (34) 19 (26)
-50 (-46) 25 (34) 19 (26)
-50 (-46) 25 (34) 19 (26)
3.0-5.0 -50 (-46) 25 (34) 19 (26)
3.0-5.0 -4 (-20) 20 (27) 15 (20)
3.0-5.0 -4 (-20) 20 (27) 15 (20)
23
24
27
28
32
30
32

37

Guaranteed
Depends on specified wall thickness. 13
 5. Available Grades and Sizes
3) API and JFE-Series Tubing List
Nominal weight
Threads &
Coupling
Outside Diameter Wall Inside Drift
Plain Thickness Diameter
End
NUE EUE

inch (mm) lb/ft lb/ft lb/ft inch (mm) inch inch

4.00 3.94 0.167 ( 4.24) 2.041 1.947
4.60 4.70 4.44 0.190 ( 4.83) 1.995 1.901
2-3/8 (60.32) 5.80 5.95 5.76 0.254 ( 6.45) 1.867 1.773
6.60 6.56 0.295 ( 7.49) 1.785 1.691
7.35 7.45 7.32 0.336 ( 8.53) 1.703 1.609
6.40 6.50 6.17 0.217 ( 5.51) 2.441 2.347
7.80 7.90 7.67 0.276 ( 7.01) 2.323 2.229
8.60 8.70 8.45 0.308 ( 7.82) 2.259 2.165
2-7/8 (73.02)
9.35 9.45 9.21 0.340 ( 8.64) 2.195 2.101
10.50 10.40 0.392 ( 9.96) 2.091 1.997
11.50 11.45 0.440 (11.18) 1.995 1.901
7.70 7.58 0.216 ( 5.49) 3.068 2.943
9.20 9.30 8.81 0.254 ( 6.45) 2.992 2.867
10.20 9.92 0.289 ( 7.34) 2.922 2.797
3-1/2 (88.90) 12.70 12.95 12.53 0.375 ( 9.52) 2.750 2.625
14.30 14.11 0.430 (10.92) 2.640 2.515
15.50 15.39 0.476 (12.09) 2.548 2.423
17.00 16.83 0.530 (13.46) 2.440 2.315
9.50 9.12 0.226 ( 5.74) 3.548 3.423
10.70 11.00 10.47 0.262 ( 6.65) 3.476 3.351
13.20 12.95 0.330 ( 8.38) 3.340 3.215
4 (101.60)
16.10 15.90 0.415 (10.54) 3.170 3.045
18.90 18.71 0.500 (12.70) 3.000 2.875
22.20 22.11 0.610 (15.49) 2.780 2.655
12.60 12.75 12.25 0.271 ( 6.88) 3.958 3.833
15.20 15.00 0.337 ( 8.56) 3.826 3.701
17.00 16.77 0.380 ( 9.65) 3.740 3.615
4-1/2 (114.30) 18.90 18.71 0.430 (10.92) 3.640 3.515
21.50 21.38 0.500 (12.70) 3.500 3.375
23.70 23.59 0.560 (14.22) 3.380 3.255
26.10 26.06 0.630 (16.00) 3.240 3.115

14
5. Available Grades and Sizes
4) API and JFE-Series Casing List
Nominal weight

Outside Diameter Wall Inside Drift Special

Threads & Plain Diameter Drift
Thickness
Coupling End

inch (mm) lb/ft lb/ft inch (mm) inch inch inch

9.50 9.41 0.205 ( 5.21) 4.090 3.965
10.50 10.24 0.224 ( 5.69) 4.052 3.927
4-1/2 (114.30) 11.60 11.36 0.250 ( 6.35) 4.000 3.875
13.50 13.05 0.290 ( 7.37) 3.920 3.795
15.10 15.00 0.337 ( 8.56) 3.826 3.701
11.50 11.24 0.220 ( 5.59) 4.560 4.435
13.00 12.84 0.253 ( 6.43) 4.494 4.369
15.00 14.88 0.296 ( 7.52) 4.408 4.283
5 (127.00) 18.00 17.95 0.362 ( 9.19) 4.276 4.151
21.40 21.32 0.437 (11.10) 4.126 4.001
23.20 23.11 0.478 (12.14) 4.044 3.919
24.10 24.05 0.500 (12.70) 4.000 3.875
14.00 13.71 0.244 ( 6.20) 5.012 4.887
15.50 15.36 0.275 ( 6.98) 4.950 4.825
17.00 16.89 0.304 ( 7.72) 4.892 4.767
20.00 19.83 0.361 ( 9.17) 4.778 4.653
23.00 22.56 0.415 (10.54) 4.670 4.545
26.80 26.72 0.500 (12.70) 4.500 4.375
5-1/2 (139.70)
29.70 29.67 0.562 (14.27) 4.376 4.251
32.60 32.57 0.625 (15.88) 4.250 4.125
35.30 35.35 0.687 (17.45) 4.126 4.001
38.00 38.08 0.750 (19.05) 4.000 3.875
40.50 40.69 0.812 (20.62) 3.876 3.751
43.10 43.26 0.875 (22.22) 3.750 3.625
20.00 19.51 0.288 ( 7.32) 6.049 5.924
24.00 23.60 0.352 ( 8.94) 5.921 5.796
6-5/8 (168.28)
28.00 27.67 0.417 (10.59) 5.791 5.666
32.00 31.23 0.475 (12.06) 5.675 5.550
17.00 16.72 0.231 ( 5.87) 6.538 6.413
20.00 19.56 0.272 ( 6.91) 6.456 6.331
23.00 22.65 0.317 ( 8.05) 6.366 6.241 6.250
7 (177.80)
26.00 25.69 0.362 ( 9.19) 6.276 6.151
29.00 28.75 0.408 (10.36) 6.184 6.059
32.00 31.70 0.453 (11.51) 6.094 5.969 6.000

15
 5. Available Grades and Sizes

Nominal weight

Outside Diameter Wall Inside Drift Special

Threads & Plain Diameter Drift
Thickness
Coupling End

inch (mm) lb/ft lb/ft inch (mm) inch inch inch

35.00 34.61 0.498 (12.65) 6.004 5.879
38.00 37.29 0.540 (13.72) 5.920 5.795
42.70 42.59 0.625 (15.88) 5.750 5.625
7 (177.80) 46.40 46.36 0.687 (17.45) 5.626 5.501
50.10 50.11 0.750 (19.05) 5.500 5.375
53.60 53.71 0.812 (20.62) 5.376 5.251
57.10 57.29 0.875 (22.22) 5.250 5.125
24.00 23.49 0.300 ( 7.62) 7.025 6.900
26.40 25.59 0.328 ( 8.33) 6.969 6.844
29.70 29.06 0.375 ( 9.52) 6.875 6.750
33.70 33.07 0.430 (10.92) 6.765 6.640
39.00 38.08 0.500 (12.70) 6.625 6.500
7-5/8 (193.68)
42.80 42.43 0.562 (14.27) 6.501 6.376
45.30 44.71 0.595 (15.11) 6.435 6.310
47.10 46.77 0.625 (15.88) 6.375 6.250
51.20 50.95 0.687 (17.45) 6.251 6.126
55.30 55.12 0.750 (19.05) 6.125 6.000
7-3/4 (196.85) 46.10 45.51 0.595 (15.11) 6.560 6.435 6.500
24.00 23.60 0.264 ( 6.71) 8.097 7.972
28.00 27.04 0.304 ( 7.72) 8.017 7.892
32.00 31.13 0.352 ( 8.94) 7.921 7.796 7.875
8-5/8 (219.08) 36.00 35.17 0.400 (10.16) 7.825 7.700
40.00 39.33 0.450 (11.43) 7.725 7.600 7.625
44.00 43.43 0.500 (12.70) 7.625 7.500
49.00 48.04 0.557 (14.15) 7.511 7.386
32.30 31.06 0.312 ( 7.92) 9.001 8.845
36.00 34.89 0.352 ( 8.94) 8.921 8.765
40.00 38.97 0.395 (10.03) 8.835 8.679 8.750
9-5/8 (244.48)
43.50 42.73 0.435 (11.05) 8.755 8.599
47.00 46.18 0.472 (11.99) 8.681 8.525
53.50 52.90 0.545 (13.84) 8.535 8.379 8.500
58.40 57.44 0.595 (15.11) 8.435 8.279 8.375

16
5. Available Grades and Sizes

Nominal weight

Outside Diameter Wall Inside Drift Special

Threads & Plain Diameter Drift
Thickness
Coupling End

inch (mm) lb/ft lb/ft inch (mm) inch inch inch

59.40 58.70 0.609 (15.47) 8.407 8.251
64.90 64.32 0.672 (17.07) 8.281 8.125
9-5/8 (244.48)
70.30 69.76 0.734 (18.64) 8.157 8.001
75.60 75.21 0.797 (20.24) 8.031 7.875
32.75 31.23 0.279 ( 7.09) 10.192 10.036
40.50 38.91 0.350 ( 8.89) 10.050 9.894
45.50 44.26 0.400 (10.16) 9.950 9.794 9.875
51.00 49.55 0.450 (11.43) 9.850 9.694
55.50 54.26 0.495 (12.57) 9.760 9.604 9.625
10-3/4 (273.05)
60.70 59.45 0.545 (13.84) 9.660 9.504
65.70 64.59 0.595 (15.11) 9.560 9.404
73.20 72.40 0.672 (17.07) 9.406 9.250
79.20 78.59 0.734 (18.64) 9.282 9.126
85.30 84.80 0.797 (20.24) 9.156 9.000
42.00 40.64 0.333 ( 8.46) 11.084 10.928 11.000
47.00 45.60 0.375 ( 9.52) 11.000 10.844
54.00 52.62 0.435 (11.05) 10.880 10.724
11-3/4 (298.45)
60.00 58.87 0.489 (12.42) 10.772 10.616 10.625
65.00 64.03 0.534 (13.56) 10.682 10.526 10.625
71.00 69.48 0.582 (14.78) 10.586 10.430
48.00 46.02 0.330 ( 8.38) 12.715 12.559
54.50 52.79 0.380 ( 9.65) 12.615 12.459
13-3/8 (339.72) 61.00 59.50 0.430 (10.92) 12.515 12.359
68.00 66.17 0.480 (12.19) 12.415 12.259
72.00 70.67 0.514 (13.06) 12.347 12.191 12.250
65.00 62.64 0.375 ( 9.53) 15.250 15.062
75.00 72.86 0.438 (11.13) 15.124 14.936
16 (406.40)
84.00 82.05 0.495 (12.57) 15.010 14.822
109.00 107.60 0.656 (16.66) 14.688 14.500
18-5/8 (473.08) 87.50 84.59 0.435 (11.05) 17.755 17.567
94.00 91.59 0.438 (11.13) 19.124 18.936
20 (508.00) 106.50 104.23 0.500 (12.70) 19.000 18.812
133.00 131.45 0.635 (16.13) 18.730 18.542

17
 6. Specification of JFE-Series
JFE Special OCTG

1) High Collapse Casing

JFE-95T With a recent increase in deep well drilling, there is a growing need for high
collapse casing in a minimum yield strength of 95 ksi (655 MPa) grade.
-110T Collapse resistance is affected by yield strength, deviation of wall thickness,
roundness, residual stress and D/t (D for outside diameter and t for wall
thickness).
Reducing the deviation of wall thickness at hot rolling, controlling yield
strength by closely regulating heat treatment conditions, and minimizing the
deterioration of roundness and straightness during cooling are performed.
This process is governed by our special techniques and knowhow.

a. Specifications
(a) Process of Manufacture and Heat Treatment
Seamless, quenched and tempered
(b) Chemical Requirements
(wt %)

Grade C, max. Si, max. Mn, max. P, max. S, max.

JFE-95T
0.35 0.35 1.60 0.030 0.030
JFE-110T

(c) Physical Properties

Tensile Requirement
Grade Yield Tensile Collapse
Strength Strength Elongation Resistance
ksi (MPa) min. ksi (MPa)

JFE-95T 95~125
110 (758)
(655~862) As Per Please ask JFE
110~140 API 5CT representative
JFE-110T 125 (862)
(758~965)

18
2) Deep Well Service

JFE-125V Drilling of deep wells in excess of 15,000 feet and high-pressure gas wells is
on the increase. P-110's burst pressure, collapse resistance and tension are
-140V not always sufficient for these applications.
Therefore, JFE-125V casing and tubing and JFE-140V casing have been
developed. Cr-Mo-Nb steel with excellent hardenability and high
temperature resistance are used to make OCTG which have superb
strength, toughness, and restricted varia-
tion of HRC.

a. Specifications
(a) Process of Manufacture and Heat Treatment
Seamless, quenched and tempered
(b) Chemical Requirements
(wt %)

Grade C Si Mn P S Cu Ni Cr Mo Nb
max. max. max. max. max. max. max.
JFE-125V 0.15~0.35 0.35 1.00 0.030 0.015 0.30 0.10 0.80~1.60 0.15~1.10 0.050
JFE-140V

(c) Physical Properties

Tensile Requirements 2mm V Charpy Impact Requirements (casing only)

Grade Yield Tensile Minimum Average Minimum Individual

Strength Strength Elongation Test Specimen Absorbed Energy Absorbed Energy
ksi (MPa) min. ksi (MPa) Temperature ft-lb (J) ft-lb (J)

JFE-125V 125~150
(862~1034) 135 ( 931) As Per 10 10 20 (27) 15 (20)
-4 F (-20 C)
JFE-140V 140~170 API 5CT
(965~1171) 150 (1034) 10 7.5 16 (22) 12 (16)

(d) Hardness Test on Casing and Coupling Stock

Variation of HRC among three locations (O.D., Mid wall, I.D.) of one quad-
rant of a ring shall be as below.
Maximum Variation
Wall thickness (inch)
JFE-125V, JFE-140V
0.500 or less 3.0
0.501 to 0.749 4.0
0.750 and above 5.0

19
 6. Specification of JFE-Series

3) Sour and Special Sour Service

JFE-80S Sour services

JFE-80S, -85S, -90S, -95S and -110S for continuous operating temperature
-85S, 85SS above 149 F (65 C)

Special sour services

-90S, 90SS OCTG for sour wells must above all have improved resistance to sulfide stress
cracking (SSC) in fluids containing H2S. Intensive research has led to a
-95S, 95SS modified Cr-Mo-Nb steel for OCTG for sour wells. This steel features both
excellent hardenability and good temper resistance. Consequently, fine and
-110S, 110SS homogeneous tempered martensite with lower HRC25 for 95 ksi grade is
obtained after tempering at higher tempering temperature. As a result, OCTG
of these grades possess excellent resistance to SSC for its strength grades.
These OCTG are subjected to more stringent quality control.
SSC-resistant steel of these grades thoroughly tested by major oil compa-
nies enjoys high ratings and is now widely used for sour gas and oil wells all
over the world.

a. Specification
(a) Process of Manufacture and Heat Treatment
Seamless, quenched and tempered

(b) Chemical Requirements (wt %)

Grade C Si Mn P S Cu Ni Cr Mo Nb B
max. max. max. max. max. max. max. max.
JFE-80S, -85S max. 1.60 0.05~1.10
JFE-90S, -95S 1.35
0.15~0.35 0.10
JFE-85SS, -90SS 0.35 0.020 0.010 0.30 0.80~1.60 0.15~1.10 0.050 0.0040
JFE-95SS, 1.00
JFE-110S, -110SS max. 0.50 0.20 max. 1.60 max. 1.10

(c) Physical Properties

Item Tensile Requirement Hardness Requirements

Yield Strength Minimum Tensile Strength Hardness

Elongation As-Quenched
Grade ksi (MPa) ksi (MPa) (HRC) Maximum
JFE-80S 80~ 95 (552~655) 95 (655) 22
JFE-85S 85~100 (586~689) 95 (655) 23
JFE-90S 90~105 (621~724) 100 (689) 24
JFE-95S 95~110 (655~758) 105 (724) 25
As Per
JFE-110S 110~125 (758~862) 120 (827) 31
API 5CT
JFE-85SS 85~100 (586~689) 95 (655) 23
Mimimum
JFE-90SS 90~105 (621~724) 100 (689) equivalent to 24
JFE-95SS 95~110 (655~758) 105 (724) 90% martensitic 25
JFE-110SS 110~125 (758~862) 120 (827) Structure 31

20
b. Examples of Physical Tests HRC test results show relatively low and stable values indispensable for
on JFE-90SS Casing increasing sulfide stress cracking (SSC) resistance for its yield strength.
SSC test results show excellent SSC-resistant properties.

(a) Hardness Test Result of Products

Rockwell C Hardness Values
Pipe Dimensions Quadrant No.
Location Maximum
O.D. W.T.
1 2 3 4 Variation

O.D. 20.9 20.1 20.6 20.9

5 1/2'' 0.415'' 0.1
I.D. 20.8 20.1 20.6 20.8

O.D. 19.8 20.0 20.4 20.5

5 1/2'' 0.725'' Mid Wall 19.7 19.4 20.0 20.1 1.2
I.D. 19.4 18.8 19.6 19.8
O.D. 19.4 18.9 19.3 18.6
7'' 1.200'' Mid Wall 19.1 19.4 19.2 19.1 1.4
I.D. 18.6 18.0 18.5 18.7

(b) SSC Test Results (NACE Standard TM0177)

Applied Stress, ksi (MPa) Threshold Stress
Wall
Thickness Location 71.1 80.1 85.5 90.0 99.0
c ksi
c/ y
(490) (552) (590) (621) (683)
0.415'' Mid Wall NF NF 546.8 31.0 85.5 0.95
0.725'' Mid Wall NF NF 301.4 3.2 85.5 0.95
Mid Wall NF NF NF 284.0 85.5 0.95
1.200''
Inside NF NF NF 499.0 85.5 0.95
Note: (Time to failure Hr)
NF = No failure during 30 days (720 hours)
= No test
c = Maximum applied stress resulted in no failure
y = Specified Minimum Yield Strength

Hardness Requirements Threshold Stress

Prior Austenitic Requirements
Variation (Wall Thickness, inch) for SSC Test
Grain Size according to NACE TM0177
Less than 0.750 0.750 to 0.999 1.000 and over Minimum % of SMYS

3.0 4.0 5.0 80

3.0 4.0 5.0 ASTM 5 and 80
3.0 4.0 5.0 finer 80
3.0 4.0 5.0 80

21
 6. Specification of JFE-Series

4) Low-Temperature Service

JFE-80L Representing the casing and tubing to be used in frigid zones, this series is
designed with increased resistance for low-temperature impact in order to
-95L withstand shock during delivery, handling, storage, make up, and running in
frigid zones. Quenching and tempering is performed to ensure both high
-110L yield strength and good low-temperature toughness. Note that the Charpy
impact test data of JFE-125L with heavy wall of 0.725 in. below show good
-125L results at – 50 F. Tensile test results and variation of HRC also show good
properties.

a. Specification

(a) Process of Manufacture and Heat Treatment

Seamless, quenched and tempered

(b) Physical Properties

Tensile Requirements 2mm V Charpy Impact Requirement (casing only)

Grade Yield Tensile Test Minimum Average Minimum Individual
Strength Strength Elongation Specimen Absorbed Energy Absorbed Energy
Temperature
ksi (MPa) min. ksi (MPa) ft-lb (J) ft-lb (J)
80~95 95 (655)
JFE-80L 10 10 25 (34) 19 (26)
(552~655)
95~125 110 (758) As Per
JFE-95L
(655~862)
-50 F (-46 C) 10 7.5 20 (27) 15 (20)
110~140 API 5CT
JFE-110L 125 (862)
(758~965)
125~150 135 (931) 10 5 14 (19) 10 (14)
JFE-125L
(862~1034)

(c) Hardness Tests (HRC) on JFE-125L Casing and Coupling Stock

Variation of HRC among three locations (O.D., Mid wall, I.D.) of one
quadrant of a ring from JFE-125L shall be as below.
Wall Thickness (inch) Maximum Variation
0.500 or less 3.0
0.501 to 0.749 4.0
0.750 and above 5.0

22
b. Example of Physical (a) HRC Variation
Properties of JFE-125L Measurements were made on four quadrants of one test ring.
Casing O.D. 5-1/2'' 0.725'' Quadrant
(139.7 18.42mm) Location 1 2 3 4

Outside 31.3 30.5 30.7 30.8

Mid Wall 31.2 31.3 31.2 31.5
Inside 31.6 31.6 31.7 31.5
Variation 0.3 1.1 1.0 0.7

(b) 2 mm Charpy Test Result

Specimen : full size (10 10)
Fracture Appearance (%, Shear)

100

Longitudinal

Transverse
50

150
20
Absorbed Energy (kg-m)

15
100

10 (ft-lb)

50

5
25
20

0
-180 -140 -100 -50 -20 +20 ( C)

-300 -250 -200 -150 -100 -50 0 +50 ( F)

Test Temperature ( C) ( F)

23
 6. Specification of JFE-Series

5) Corrosive Wet CO2 Service

JFE-13CR-80 In oil and gas fields being looked to for future development, gas which
includes CO2 is an increasingly common occurrence. Corrosion has become
-13CR-85 the major problem for production strings used in environments including CO2,
and there is a great demand for a tubing that has strong resistance to CO2 cor-
-13CR-95 rosion. JFE Steel's JFE-13CR is a mertensitic stainless steel which combines
high performance in such kind of corrosive condition with low cost.

JFE -HP1-13CR-95 For fields with more severe conditions such as high temperature and containing
not only CO2 but small amounts of H2S, JFE Steel developed JFE-HP-13CR

-HP1-13CR-110 (HP1 and HP2) material which has higher strength and outstanding
anti-corrosion property. It also shows excellent low-temperature toughness.

JFE -HP2-13CR-95 a. Specifications

-HP2-13CR-110 (a) Process of Manufacture

Process : Seamless
Heat Treatment : Quenched and Tempered/Ausformed Tempered

(b) Chemical Composition (wt %)

Grade C Si, max. Mn P, max. S, max. Cr Ni Mo Cu, max.

JFE-13CR 0.15~0.22 1.00 0.25~1.00 0.020 0.010 12.0~14.0 max. 0.50 0.25
JFE-HP1-13CR max. 0.04 0.50 max. 0.60 0.020 0.010 12.0~14.0 3.50~4.50 0.80~1.50
JFE-HP2-13CR max. 0.04 0.50 max. 0.60 0.020 0.005 12.0~14.0 4.50~5.50 1.80~2.50

(c) Specified Physical Properties (at Ambient Temperature)

Yield Strength Tensile Strength Hardness

min. max. min. Elongation
Grade max.
psi psi psi %
HRC
(MPa) (MPa) (MPa)
JFE-13CR-80 80,000 (552) 95,000 (655) 95,000 (655) API Formula 23
JFE-13CR-85 85,000 (586) 100,000 (689) 100,000 (689) API Formula 24
JFE-13CR-95 95,000 (655) 110,000 (758) 105,000 (724) API Formula 27
JFE-HP1-13CR-95 28
95,000 (655) 110,000 (758) 105,000 (724) API Formula
JFE-HP2-13CR-95 30
JFE-HP1-13CR-110 32
110,000 (758) 130,000 (896) 120,000 (827) API Formula
JFE-HP2-13CR-110 32

Notes:
-The corrosion testing data in this brochure were obtained from laboratory testing results. Care should always be taken when
selecting materials, as operating conditions may change during the period of usage.
-Regarding completion/packer fluid
Care should be taken in the selection of well fluids such as completion/packer fluids used in connection with this material in order to
minimize the risk of stress corrosion cracking. JFE recommends that you consult with a person knowledgeable about fluid
compatibility with this material in making a selection.
-Cr tubulars have shown a tendency toward localized pitting corrosion when stored in moist environments.
Special precautions during coating, shipping and storage are required.
-Anti-galling connection
Cr tubulars have been categorized as prone to thread galling, JFE Steel recommends to use FOXTM & JFEBEARTM premium
connection which overcomes this concem by its special design criteria. (Please see page 31, 32)

24
b. Test Data

(a-1) Effect of Temperature on Corrosion Rate

38.6 3.5%NaCl sol.

Pco2 = 30 atm(initial)
10 Velocity = 0m/s

9 Carbon steel

8
Corrosion rate (mm/y)

3
Low alloy steel
2
13Cr stainless
1
Duplex stainless
0
0 50 100 150 200 250
Temperature ( C)

(a-2) Effect of CO2 Partial Pressure on Corrosion Rate

(psi) (psi)
10 100 1000 10 100 1000
8 300 8 300
3.5%NaCl Carbon steel 3.5%NaCl 23.5 38.5
Low alloy steel Carbon
3.5%NaCl steelsteel
Carbon
7 13Cr stainless steel 7 Low alloy steel
Duplex stainless steel Low alloy steel
13Cr stainless steel
13Cr stainless steelsteel
Duplex stainless
Duplex stainless steel
6 6
Corrosion rate (mm/y)

Corrosion rate (mm/y)

200 200
5 5
(mil/y)

(mil/y)

4 4

3 3
100 100

2 2

1 1

0 0 0 0
0.01 0.1 1 10 0.01 0.1 1 10
Partial pressure of CO2(MPa) Partial pressure of CO2(MPa)
Temperature : 25 C (77 F) Temperature : 80 C (176 F)

25
 (a-3) Effect of Cr Content on CO2 Corrosion Rate
8

6
Corrosion rate (mm/y)

Flow rate : 1m/s

Temp. : 50 C 0.1%NaCl sol.
0 0 CO2 : 0.1MPa Sea water
0 10 20
Cr content (mass%)

(a-4) CO2 Corrosion Test Results of HP1-13CR and conventional 13Cr

0.060 20% NaCl sol.

0.057 0.042
10 0.016 pH : 4.5
0.97 0.20
0.018
0.15 0.18 0.22 0.30
0.15
0.91
API-13CR 0.011
CO2 Pressure (MPa)

0.13 0.25
1.0
0.10 0.12
0.26 HP13CR
0.071 0.17
0.08
0.13 0.39

0.1 API-13CR
HP13CR
Open : Corrosion Rate 0.127mm/Yr
Closed : Corrosion Rate 0.127mm/Yr

0.01
75 100 125 150 175 200 225
Temperature ( C)

(b-1) C-Ring SSC Test Results of HP1-13CR (b-2) U-Bend SSC Test Results of HP1-13CR
and conventional 13Cr steels and conventional 13Cr steels
Sol.: (5%NaCl+0.5%CH3COOH)+CH3COONa Sol.: (5%NaCl) Gas: P(H2S+CO2)=3.0MPa
Gas: 10%H2S+90%CO2 7days 7days
100
Open : No Crack 13CR
Solid : Crack HP1-13CR

0.01
Crack
Applied stress (%SMYS)

90
H2S Pressure (MPa)

No Crack Conventional 13Cr

80 0.003
Crack
HP1-13CR
No Crack
70 Crack
No Crack Conventional 13Cr 0.001
Solid : Crack
Crack No Crack HP1-13CR Open : No Crack HP1-13CR
60 Conventional 13Cr Conventional 13Cr
2.3 2.8 3.3 3.8 4.3 50 100 150
(pH) Temperature ( C)

26
(b-3) Effect of Mo content on the resistance to SSC
0.1

Open : No Failure
Closed : Failure

PH2S (MPa) 0.01

HP2-13CR

HP1-13CR
0.001

0.025C - 13Cr
4Ni-1Mo (HP1-13CR)
0.0001 5Ni-2Mo (HP2-13CR)
2 2.5 3 3.5 4 4.5 5
pH

(C) Physical and Thermal Properties (Information Purpose Only)

Minimum Value Temperature

Grade 50 C 100 C 150 C 200 C
(122 F) (212 F) (302 F) (392 F)
Yield psi 80,000 78,000 75,000 72,000
Strength (MPa) (550) (540) (520) (500)
JFE-13CR-80
Tensile psi 98,000 95,000 91,000 90,000
Strength (MPa) (680) (660) (630) (620)
Yield psi 92,000 89,000 88,000 85,000
Strength (MPa) (630) (610) (610) (590)
JFE-13CR-95
Tensile psi 106,000 101,000 98,000 95,000
Strength (MPa) (730) (700) (680) (660)
Yield psi 98,000 97,000 96,000 94,000
Strength (MPa) (680) (670) (660) (650)
JFE-HP1-13CR-95
Tensile psi 117,000 112,000 108,000 106,000
Strength (MPa) (810) (770) (740) (730)
Yield psi 115,000 110,000 106,000 104,000
Strength (MPa) (790) (760) (730) (720)
JFE-HP1-13CR-110
Tensile psi 126,000 119,000 115,000 114,000
Strength (MPa) (870) (820) (790) (780)
Yield psi 100,000 98,000 96,000 95,000
Strength (MPa) (690) (680) (670) (660)
JFE-HP2-13CR-95
Tensile psi 125,000 120,000 115,000 113,000
Strength (MPa) (860) (830) (790) (780)
Yield psi 109,000 106,000 103,000 101,000
Strength (MPa) (750) (730) (710) (700)
JFE-HP2-13CR-110
Tensile psi 129,000 123,000 117,000 114,000
Strength (MPa) (890) (850) (810) (790)

Young Modulus Poisson's Ratio Thermal Expansion

JFE-13CR-80 31,290 ksi (215,700 MPa) 0.30 0.0000099/ C for 21.1 C up to 100 C
0.0000115/ C for 21.1 C up to 538 C

27
 6. Specification of JFE-Series

5) High Strength High Temperature Wet CO2 Service

TM

JFE- HP-15CR-125 High demand for natural gas, deep water drilling and an increasing number of
high pressure, high temperature (HPHT) wells has generated the need for a
high strength OCTG material which can provide superior corrosion resistance
TM
at high temperatures. JFE-UHP -15CR-125 is that material. A tempered
Martensitic microstructure provides high strength at ambient and elevated
temperatures with excellent corrosion resistance properties in both productive
and none productive environments.

a. Specifications

(a) Process of Manufacture

Process : Seamless
Heat Treatment : Quenched and Tempered/Ausformed Tempered

(b) Chemical Composition

(wt %)

Grade C, max. Si, max. Mn, max. P, max. S, max. Cr Ni Mo Cu, max.
TM
JFE-UHP -15CR-125 0.04 0.50 0.60 0.020 0.005 14.0~16.0 6.00~7.00 1.8~2.5 1.5

(c) Specified Physical Properties (at Ambient Temperature)

Yield Strength Tensile Strength Hardness

min. max. min. Elongation
Grade max.
ksi ksi ksi %
HRC
(MPa) (MPa) (MPa)
TM
JFE-UHP -15CR-125 125 (862) 150 (1034) 135 (931) API Formula 37

Notes:
-The corrosion testing data in this brochure were obtained from laboratory testing results. Care should always be taken when
selecting materials, as operating conditions may change during the period of usage.
-Regarding completion/packer fluid
Care should be taken in the selection of well fluids such as completion/packer fluids used in connection with this material in order to
minimize the risk of stress corrosion cracking. JFE recommends that you consult with a person knowledgeable about fluid
compatibility with this material in making a selection.
-Cr tubulars have shown a tendency toward localized pitting corrosion when stored in moist environments.
Special precautions during coating, shipping and storage are required.
-Anti-galling connection
Cr tubulars have been categorized as prone to thread galling, JFE Steel recommends to use FOXTM & JFEBEARTM premium
connection which overcomes this concem by its special design criteria. (Please see page 31, 32)

28
b. Test Data
TM
(1) CO2 Corrosion Test Results of UHP -15CR-125
Temperature ( F)
122 212 302 392 482
TM
UHP -15CR

10 1450
0.11 0.31

0.09 0.18
CO2 Pressure (MPa)

CO2 Pressure (psi)

1 0.07 145

0.1 14.5

Open : Corrosion Rate 0.127mm/Yr

Closed : Corrosion Rate 0.127mm/Yr

0.01 20% NaCl sol.

50 100 150 200 250
Temperature ( C)
TM
(2) SSC Test Results of UHP -15CR-125
0.1 14.5

0.01 1.45
PH2S (MPa)

20% NaCl sol.

PH2S (psi)

(Cl - 121,200ppm)

0.5%CH3COOH
+CH3COONa
0.001 0.145
100%SMYS(125ksi)
720h
Open : No Failure
Closed : Failure NACE-TM0177-Method A
0.0001 0.0145 NACE-TM0177-Method C
1 2 3 4 5 6
pH
0.1 14.5

0.01 1.45
PH2S (MPa)

PH2S (psi)

0.165% NaCl sol.

(Cl - 1,000ppm)

0.5%CH3COOH
0.001 0.145
+CH3COONa

100%SMYS(125ksi)
Open : No Failure 720h
Closed : Failure

0.0001 0.0145 NACE-TM0177-Method A

1 2 3 4 5 6
pH

29
 TM
(3) Tensile test results of UHP -15CR-125 at elevated temperature
1000

140

900
Yield Strength (MPa)

Yield Strength (ksi)

TM
UHP -15CR 125

800

110
S-Duplex (25Cr)
700
Duplex(22Cr)
95

600
50 100 150 200 250 300
Temperature( C)

TM
JFE-UHP -15CR-125 provides better tensile properties at elevated temperature
than Duplex stainless steel, which requires cold drawn.

(4) Corrosion test results in acidizing condition

Simulatd Live Acid Condition Simulatd Spent Acid Condition

140 4.5
125.53 4.01
4
120
Corrosion Rate(mm/yr)

Corrosion Rate(mm/yr)

3.5
100
3
80 2.5

60 2
1.5
40
1
20 0.51
0.5
4.88
0 TM 0 TM
UHP -15CR-125 22Cr UHP -15CR-125 22Cr

1.5%HF + 13.5%HCl + Inhibitor 5%CH3COOH + 7%HCOOH + 1%HF

80C(176F) 24Hrs + Inhibitor ,80C(176F) 168Hrs

TM
JFE-UHP -15CR-125 provides better corrosion resistance than Duplex stainless
steel during acidizing operations.

30
 7. Premium Threaded Connections

1) FOX TM

TM
FOX is an advanced premium threaded connection jointly developed by JFE Steel Corporation, and Hunting
Oilfield Services, in early 1980s.
The connection was created using an advanced thread geometry and unique seal design to reduce thread galling
TM
and enhance sealing performance. FOX is a field proven connection with over 50 million ft sold world wide.

THREAD FORM
3
Modified Buttress Thread
2 3/8", 2-7/8" :8TPI,
10 3 1/2", 4" :6TPI,
4 1/2" to 13 3/8" :5TPI

SEAL GEOMETRY

Contoured
Metal to Metal Seal

Thread Buttress Modified Type

Pitch Change on Coupling thread
Seal Contoured Metal to Metal Seal
Other Internal Flash
Size 2-3/8" – 13-3/8"

31
 2) JFEBEARTM

In today's oil & gas industry, companies are drilling deeper high–deviation wells into high pressure reservoirs
using the latest generation of drilling rigs and tools. As a result, the loads placed on OCTG connections in certain
TM
well conditons exceed those of an API class–1 qualified connection. JFEBEAR has been designed and tested to
withstand today's toughest well conditions.

THREAD FORM

-5 Special Hook Thread

2 3/8", 2-7/8" :8TPI,
3 1/2", 4" :6TPI,
25 4 1/2" to 9 5/8" :5TPI

SEAL GEOMETRY

Contoured
Metal to Metal Seal

Thread Negative Load Flank Angle

Different Load Flank Angles and Corner Radius on Pipe and Coupling Threads
Seal Contoured Metal to Metal Seal
Other Internal Flash
Size 2-3/8" – 9-5/8"

TM TM
* Detailed information on connections can be found in the FOX , and JFEBEAR brouchures.

32
 8. Marking

Tubing and casing are paint-stenciled as shown below.

The color identification table for JFE-series tubing and casing are shown next page.

Marking Example

API5CT L80 BUTC API Spec 5CT Size & Nominal Weight
License No. Type of Thread Heat Number Pipe Number Shipping Mark

JFE 5CT JFE STEEL 5CT 5CT-0015 41 9-5/8 53.50 L S P7100 BC D 1-12345 76543-01 NO.1 40.1FT MADE IN JAPAN
21 L BC

API Monogram Grade MFG Number Length

Grade Year & Quarter Process Drift
Manufacturer's Name Hydrostatic Test
Color coating for
Grade Identification

JFE-Series (JFE-110T) BUTC

Process Type of Thread

JFE-110T JFE STEEL 41 9-5/8 53.50 JFE-110T S P9200 BC D 1-12345 76543-01 NO.1 40.1FT MADE IN JAPAN

Grade Drift
Hydrostatic Test

Size & Nominal Weight

TM TM
API5CT L80-13CR FOX or JFEBEAR Process Type of Thread
API Monogram Drift
(JFEBEAR)
FOX
JFE STEEL 5CT 5CT-0015 41 SF 2-7/8 6.40 L13 S P9700 FOX D 1-12345 76543-01 NO.1 32.0FT MADE IN JAPAN
JFE 5CT 21 SF L13 (JFEBEAR)
2 7/8 6.4
License No. Grade
Hydrostatic Test
Special End Finish Mark

TM TM
JFE-Series (JFE-13CR-80) FOX or JFEBEAR Type of Thread
Process Drift
(JFEBEAR)
FOX
JFE STEEL 41 2-7/8 6.40 JFE-13CR-80 S P9700 FOX D 1-12345 76543-01 NO.1 32.0FT MADE IN JAPAN
JFE-13CR-80 (JFEBEAR)
2 7/8 6.4
Grade
Hydrostatic Test

33
 9. Color Identification of JFE OCTG
(JFE-Series)

Type Grade Coupling Pipe Body Type Grade Coupling Pipe Body
General Arctic
Service JFE-40E Service JFE-80L
(ERW)

JFE-55E JFE-95L

JFE-80E JFE-110L

High
Collapse JFE-80ET JFE-125L
Casing(ERW)
High Deep
Collapse JFE-80T Well JFE-125V
Casing Service
(Seamless)
JFE-95T JFE-140V

Wet CO2
JFE-110T Service JFE-13CR-80

Sour
Service JFE-80S JFE-13CR-85

JFE-85S JFE-13CR-95

High JFE-HP1-
JFE-90S Temperature 13CR-95
Wet CO2
Service JFE-HP1-
JFE-95S
13CR-110

JFE-HP2-
JFE-110S
13CR-95

Special JFE-HP2-
Sour JFE-85SS
13CR-110
Service
High
JFE-90SS Strength TM
High JFE-UHP-
Temperature 15CR-125
JFE-95SS Wet CO2
Service
The special clearance coupling is painted with a black band
JFE-110SS adjacent to a color identification band on the coupling.

Sour
Service JFE-80TS
&
High
Collapse JFE-95TS

34
 10. Thread Protectors and Packaging

1) Thread Protectors
Various types of protector including composite type are available according to customer's requests.

2) Packaging
Bare in bundle or bare in loose is the standard packaging method for carbon OCTG. Other than the standard
packaging, customer can choose special packaging such as rack pack (in wooden or plastic), spacer rings or
JFE-PACK all of which avoid metal to metal contact during transport and storage.

1. JFE-PACK can be used for all pipe 2. JFE-PACK is composite-type packing unit fit
sizes ranging from 2-3/8" to 10-3/4" by for repetitive re-bundling.
changing the spacers.

SPACER

LOAD-DEVIATION
KG LB

X
2000 4408
JFE-PACK
1810KG
(3989LB)
3. JFE-PACK can pack different number of pipes by
changing the number of parts. 1500 3306
OTHER
PRODUCT
1620KG
(3570LB)
1000 2204
4. JFE-PACK has drainage function,anti-slip function
at the contact portion with pipes.

500 1102

0 0
11 12 13 14 15 16
DEVIATION (mm)

For more detail information about Cr materials packaging, please refer to

http://www.jfetc.com/support/packing-a-handling 35
 11. Inquiries and Orders
The following information if available should be specified in your order or inquiry.

1. Specification, Grade and Type

2. Quantity (feet, meters, or number of joints, delivery allowance)

3. Seamless, Electric Welded (ERW) or UOE

4. Casing or Tubing
/Threaded or Plain End
TM
/Thread Type (API, FOX or other premium connection)
/With or Without Couplings
/Special Clearance Couplings
/Special Bevel Couplings

5. Size (Outside Diameter)

6. Nominal Weight with Specified Unit or Wall Thickness

7. Range Length

8. Marking and Packaging (if specification is outside that presented in this

brochure)

9. Delivery Date and Shipping Instructions

10. Third Party Inspection

11. Any Other Special Requirements such as;

/Hydrostatic Test Pressure
/Non Destructive Inspection
/Thread Protectors
/Thread Compound
/Coupling Make Up Other Than Power Tight
/Special Drift
/Internal Descaling (In case of 13Cr material)

36
Cat.No.E1E-012-13

1807R(1403)1-1 UM
Printed in Japan