Scribd
Upload
151 views

Mixer Data Sheet

This document provides specifications for a mixer with the tag DWG-016. It operates continuously with one machine that performs turbulent mixing. The mixer has 3 blades on one set that spin at 20 revolutions per second, powered by a 1704 kW electric motor. It is an impeller-type mixing machine with a shaft, impeller, and supports made of specialized alloys and low-carbon steel housed in a vessel 8.3 meters deep.

Uploaded by

Benedick Jayson Marti
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
151 views

Mixer Data Sheet

This document provides specifications for a mixer with the tag DWG-016. It operates continuously with one machine that performs turbulent mixing. The mixer has 3 blades on one set that spin at 20 revolutions per second, powered by a 1704 kW electric motor. It is an impeller-type mixing machine with a shaft, impeller, and supports made of specialized alloys and low-carbon steel housed in a vessel 8.3 meters deep.

Uploaded by

Benedick Jayson Marti
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Equipment No.

(Tag) DWG-016
Mixer data sheet Descript. (Func.)
Sheet No.
1
Operating Data
2
No. of MACHINES 1 WORKING STANDBY 3
SIZE OF CHARGE 4
RATE OF CHARGING 5
CONTIN.
TIME ACTUALLY MIXING DUTY INTERMIT. DUTY 6
TYPE OF MIXING
(turbulent/moderate/light) turbulent 7
SOLIDS CONTENT SOLIDS S.G 8
0.0008158
LIQUID VISCOSITY (kg.m)/s LIQUIDS S.G 1.02169 9
SLURRY VISCOSITY (APPARENT) 10
PARTICLE SIZE ANALYSIS 11

SOLIDS SETTLING VELOCITY 12


13
Vessel Data
14
DEPTH OF VESSEL 8.30m 15
DEPTH OF LIQUID 7.58 m MAX 8.30m NORMAL 8.30m MIN 16
ANGLE OF AGITATOR 90 17
SIZE OF APPERTURE FOR IMPELLER 2.77 18
WORKING PRESSURE 221.43kPa 19
WORKING TEMPERATURE 30C 20
21
Technical Data 22
TYPE OF MIXER Impeller-Type Mixing Equipment 23
No. OF BLADES 3 24
No. OF SETS OF BLADES 1 25
SPEED 20rev/s ABSORBED POWER (hp/KW) 1704kW 26
Electric
SHAFT DIAMETER TYPE OF MOTOR Motor 27
CRITICAL SPEED RECOMMENDED MOTOR POWER 28
TYPE OF SEAL OR GLAND 29
METHOD OF SUPPORT 30
TOTAL LOAD 31
WITHDRAWAL HEIGHT REQUIRED 32
TYPE OF BEARINGS 33
ANGLE OF BLADES 120 34
35
Materials of Construction
36
SHAFT Chrome-manganese-silicon alloy steel IMPELLER 37
SUPPORTS Carbon Steel S285 Low Carbon Steels AISI 1015 38
Vessel Data Chrome-manganese-silicon alloy steel SEAL OR GLANDS 39
BEARINGS 40

You might also like