Hanger Rods: Coach Screw Rods Machine Threaded On Opposite End

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

hanger rods

Fig. 142 Coach Screw Rods


Machine Threaded on Opposite End

Size Range: 3⁄8" and 1⁄2"


Material: Carbon steel
Finish:Plain
Ordering: Specify rod size, figure number, name and rod length.

C A D

FIg. 142: Standard Thread Lengths (in) • Loads (lbs)


Rod Size Standard Coach Screw Standard Rod Max
A Length - L Thread Length – C Thread Length – D Load
31⁄2 3
⁄4
3
⁄8 2 390
8 21⁄2
31⁄2 3
⁄4
1
⁄2 27⁄16 640
8 21/2

Fig. 146 Continuous Threaded Rod

Size Range: 1⁄4" through 1 1⁄2" Stocked in six, ten, and twelve foot
lengths. Other even foot lengths can be furnished to order.
Material: Carbon steel or Stainless Steel Gr 304
Threads: National Coarse (USS), rod threaded complete length.
Finish: Plain or Galvanized.
Maximum Temperature: 650° F.
Ordering: Specify rod diameter and length, figure number,
Fig. 146:
name and finish.
Loads (lbs) • Weights (lbs) • Dimensions (in)
Note: The acceptability of galvanized coatings at temperatures
above 450°F is at the discretion of the end user. Rod Size Threads Max Load Weight
A per Inch 650˚ F per Ft.
1
⁄4 20 240 0.12
Length
3
⁄8 16 730 0.30
1
⁄2 13 1,350 0.53
5
⁄8 11 2,160 0.84
3
⁄4 10 3,230 1.20
A
7
⁄8 9 4,480 1.70
1 8 5,900 2.30
11⁄4 7 9,500 3.60
11⁄2 6 13,800 5.10
Note: Other rod sizes available upon request. Class 2 fit is available upon request.

96
www.anvilintl.com
PH-11.11
hanger rods

Fig. 140: Right-hand Threads

Notes Contents
General Table of
Machine Threaded Rods
Threaded Both Ends
Fig. 253: Right and Left hand Threads

Copper Tubing
Size Range: 3⁄8" through 5"

Hangers
Material: Carbon steel
Finish: Plain or Galvanized
Ordering: Specify rod size, figure number, name, rod length

Stainless Steel
and finish. Specify thread length if other than standard.

Hangers
Note: The acceptability of galvanized coatings at temperatures
D D
above 450°F is at the discretion of the end user. A

Pipe Hangers
Fig. 140, 253: Loads (lbs) • Dimensions (in) Fig. 140, 253:

CPVC
Rod Size Threads Max Load Standard Rod Loads (lbs) • Dimensions (in) (cont.)
A per Inch 650° F 750° F Thread Length D*
Rod Size Threads Max Load Standard Rod

Rings
Pipe
3
⁄8 16 730 572 A per Inch 650° F 750° F Thread Length D*
1
⁄2 13 1,350 1,057 21⁄2 23⁄4 4 49,400 38,687 11

Hangers
Clevis
5
⁄8 11 2,160 1,692 3 4 60,100 47,066 12
3
⁄4 10 3,230 2,530 3 31⁄4 4 71,900 56,307 13

Steel Pipe
31⁄2 4 84,700 66,331 14

Clamps
7
⁄8 9 4,480 3,508 31⁄2
33⁄4 4 98,500 77,139
1 8 5,900 4,620 4 15
4 4 113,400 88,807
11⁄4 7 9,500 7,440 5
41⁄4 4 UN 129,400 101,337

Clamps
Socket
11⁄2 6 13,800 10,807 6 41⁄2 4 UN 146,600 114,807
18
13⁄4 5 18,600 14,566 7 43⁄4 4 UN 164,700 128,982

Clamps
2 41⁄2 24,600 19,265 8 5 4 UN 184,000 144,096

Beam
*Fig. 140 rod up to 1" rod size and 24" in length may be furnished as Fig 146 rod
21⁄4 41⁄2 32,300 25,295 9
unless order states that all thread rod is not acceptable.
21⁄2 4 39,800 31,169 10 *3/8"- 4" Diameter: UNC-2A CLASS fit.

Attachments
Structural
Fig. 248: Right Hand Threads Eye Rod Not Welded

Brackets
Fig. 248L: Left Hand Threads

Ceiling Plates
& Flanges
Size Range: 3⁄8" through 2 1⁄2"
Material: Carbon steel Fig. 248, Fig. 248L:
Loads (lbs) • Dimensions (in)
Finish: Plain or Galvanized.

Concrete Inserts
& Attachments
Maximum Temperature: 650° F Rod Size Standard Rod L Max Load
Features: Through 1 1⁄2", inside diameter of eye will A Thread Length – D (min) 650° F
accommodate a bolt diameter 1⁄8" larger than rod diameter; 3
⁄8
41⁄4 240
1 3⁄4" and larger, inside diameter of eye will take a bolt diameter 1
⁄2 21⁄2
Hanger
Rods

1
⁄4" larger than rod diameter. 5
⁄8 41⁄2 705
Ordering: Specify rod diameter, figure number, name, rod 3
⁄4 3 51⁄2 1,050
length and finish. Specify thread length if other than standard. 7
⁄8 31⁄2 61⁄2 1,470
Attachments

1 4 71⁄4 1,940
Rod

A 11⁄4 5 81⁄4 3,120


11⁄2 6 10 4,650
13⁄4 7 12 6,380
Pins & U-Bolts
Bolts, Nuts,

2 8 14 8,280
D
21⁄4 9 151⁄2 10,900
L 21⁄2 10 17 13,400

www.anvilintl.com 97
PH-11.11
hanger rods

Fig. 278: Right Hand Threads Eye Rod Welded

Fig. 278L: Left Hand Threads


Size Range: 3⁄8" through 2 1⁄2"
Material: Carbon steel
Finish: Plain or Galvanized
Fig. 278, Fig. 278L:
Features: Through 1 1⁄2", inside diameter of eye will accommodate
a bolt diameter 1⁄8" larger than rod diameter; 1 3⁄4" and larger, Loads (lbs) • Dimensions (in)
inside diameter of eye will take a bolt diameter 1⁄4" larger Max Load
Rod Standard Rod
than rod diameter. L (min)
Size A Thread Length - D 650˚ F 750˚ F
Maximum Temperature: 750° F
Ordering: Specify rod diameter, figure number, name, rod
3
⁄8 730 572
41⁄4
length and finish. Specify thread length if other than standard.
1
⁄2 21⁄2 1,350 1,057
Note: The acceptability of galvanized coatings at temperatures
5
⁄8 41⁄2 2,160 1,692
above 450°F is at the discretion of the end user.
3
⁄4 3 51⁄2 3,230 2,530
7
⁄8 31⁄2 61⁄2 4,480 3,508
A 1 4 71⁄4 5,900 4,620
WELDED
11⁄4 5 81⁄4 9,500 7,440
11⁄2 6 10 13,800 10,807
13⁄4 7 12 18,600 14,566
D
2 8 14 24,600 19,265
L 21⁄4 9 151⁄2 32,300 25,295
21⁄2 10 17 39,800 31,169

Fig. 248X: Not Welded Linked Eye Rods

Fig. 278X: Welded


Size Range: 3⁄8" through 2 1⁄2"
Service: The use of linked eye rods in a hanger assembly
allows universal movement of the piping without bending
and possible fracture of a straight rod.
Finish: Plain or Galvanized Fig. 248X, 278X:
Maximum Temperature: Fig. 248X: 650° F, Fig. 278X: 750° F Dimensions (in) • Loads (lbs)
Ordering: Specify the size, length of each eye rod, figure number and finish. Max Load
Example: Rod Size
Fig. 248X Fig. 278X
7
⁄8" Fig. 278X linked welded eye rod consisting of: A
(L1) 7⁄8" Fig. 278 welded eye rod 1 ft. 2 1⁄2 in. long, center to end. 650° F 650° F 750° F
(L2) 7⁄8" Fig. 278 welded eye rod 1 ft. 2 1⁄2 in. long center to end. 3
⁄8 240 730 572
1
⁄2 440 1,350 1,057
L1 L2 5
⁄8 705 2,160 1,692
3
⁄4 1,050 3,230 2,530
7
⁄8 1,470 4,480 3,508
Fig. 248X 1 1,940 5,900 4,620
A
11⁄4 3,120 9,500 7,440
11⁄2 4,650 13,800 10,807
L1 L2
WELDED 13⁄4 6,380 18,600 14,566
2 8,280 24,600 19,265
21⁄4 10,900 32,300 25,295
Fig. 278X
A 21⁄2 13,400 39,800 31,169

98
www.anvilintl.com
PH-11.11
hanger rods

Fig. 148

Notes Contents
General Table of
Rod with Eye End

Size Range: 2 3⁄4" through 5"


Material: Carbon steel

Copper Tubing
Finish: Plain or Galvanized

Hangers
Service: A large diameter rod with eye end for load ratings thru 184,000 pounds.
Ordering: Specify rod size, figure number, name, finish and “L” dimension. Indicate
if desired thread length is other than standard.

Stainless Steel
Hangers
Note: The acceptability of galvanized coatings at temperatures above 450°F is at the
discretion of the end user.

Pipe Hangers
CPVC
T W


R

Rings
Pipe
H

B E

Hangers
Clevis
Steel Pipe
Clamps
L (MIN)

Clamps
Socket
Clamps
Beam
D

Attachments
Structural
A

Brackets
Fig. 148: Loads (lbs) • Weights (lbs) • Dimensions (in)
Max Load Weight/Ft.
Rod Weight* L

Ceiling Plates
& Flanges
Additional B D E H R T W
Size A 650˚ F 750˚ F Min Length (Min)
Length
23⁄4 49,400 38,687 35.9 20 95⁄8 33⁄4 31⁄8 19 35⁄8
6

Concrete Inserts
& Attachments
3 60,100 47,066 42.9 24 11 12 33⁄8 20 4 11⁄2
4
31⁄4 71,900 56,307 54.7 28 121⁄4 35⁄8 21 41⁄4
7
31⁄2 84,700 66,331 67.3 33 121⁄2 43⁄4 37⁄8 24 41⁄2
Hanger

33⁄4 98,500 77,139 80.0 37 137⁄8 15 41⁄8 25 47⁄8 71⁄2


Rods

5 2
4 113,400 88,807 97.0 43 151⁄8 43⁄8 26 51⁄8 81⁄2
Attachments

41⁄4• 129,400 101,337 127.0 48 161⁄4 51⁄4 45⁄8 51⁄2 91⁄2


Rod

30
41⁄2• 146,600 114,807 131.0 54 16 47⁄8 53⁄4 81⁄2
18 53⁄4
43⁄4• 164,700 128,982 154.0 60 17 51⁄8 31 6 21⁄2 91⁄2
Pins & U-Bolts
Bolts, Nuts,

5• 184,000 144,096 175.0 67 177⁄8 61⁄4 53⁄8 32 63⁄8 10


*Weight calculated with minimum “L” for standard thread • Furnished with 4 UN series threads

www.anvilintl.com 99
PH-11.11
rod attachments

Fig. 135: Straight with Sight-Hole Rod Coupling

Fig. 135E: Straight Less Sight-Hole


Fig. 135R: Reducing Fig 135, 135E, 135R:
Loads (lbs) • Weights (lbs) • Dimensions (in)
Size Range: 1⁄4" through 1" Rod Size A Max Load Weight D L
Material: Carbon steel Fig. 135: Straight With Sight-Hole
3
⁄8 730 0.09 9
⁄16 11⁄8
Finish: Fig. 135: Plain; Fig.135E and Fig.135R Galvanized 1
⁄2 1,350 0.12 3
⁄4 11⁄2
Service: For connecting rods to accommodate up to 1" 5
⁄8 2,160 0.24 15
⁄16 17⁄8
diameter and support up to 5,900 pounds. 3
⁄4 3,230 0.42 11⁄8 21⁄4
Ordering: Specify rod size, figure number and name.
7
⁄8 4,480 0.66 15⁄16 25⁄8
1 5,900 1.00 11⁄2 3
Fig. 135E: Straight Less Sight-Hole
1
⁄4 240 0.03 3
⁄8 ⁄8
7

3
⁄8 730 0.09 5
⁄8 11⁄8
1
⁄2 1,350 0.14 11
⁄16 13⁄4
5
⁄8 2,160 0.26 13
⁄16 21⁄8
Sight
Hole
3
⁄4 3,230 0.34 1 21⁄4
7
⁄8 4,480 0.55 11⁄4 21⁄2
L
1 5,900 0.75 13⁄8 23⁄4
Fig. 135R: Reducing
D
3
⁄8 x 1⁄4 240 0.13 5
⁄8 11⁄2
1
⁄2 x 3⁄8 730 0.13 11
⁄16 11⁄4
5
⁄8 x 1⁄2 1,350 0.19 13
⁄16 11⁄4
3
⁄4 x 5⁄8 2,160 0.26 1 11⁄2
7
⁄8 x 3⁄4 3,230 0.41 11⁄4 13⁄4

Fig. 136: Straight Rod Coupling

Fig. 136R: Reducing Fig. 136, 136R:


Loads (lbs) • Weights (lbs) • Dimensions (in)
Size Range: 1⁄4" through 1"
Rod Max
Material: Malleable iron Weight L D
Size A Load
Finish: Plain or Galvanized
Straight: Fig. 136
Service: For connecting rod lengths within limitation.
Approvals: Fig. 136: UL, ULC Listed ( 3⁄8" - 7⁄8" rod size) and FM Approved ( 3⁄8"
1
⁄4 230 0.06 13⁄8 5
⁄8
and 1⁄2" rod size). Fig. 136R: UL Listed ( 1⁄2" and 3⁄8" rod size). 3
⁄8 730 0.10 1 ⁄8
5 11
⁄16
Features: D 1
⁄2 1,350 0.20 21⁄8 15
⁄16
• Available in reducing sizes. 5
⁄8 2,160 0.33 21⁄2 11⁄8
• Provides visual inspection
of thread engagement.
3
⁄4 3,230 0.44 25⁄8 11⁄4
• Uniform strength; 7
⁄8 4,480 0.96 33⁄16 15⁄8
L
good appearance. 1 5,900 0.94 23⁄4 113⁄16
Ordering: Specify rod tapping
size, figure number and name. Reducing: Fig. 136R
Furnished with right-hand 3
⁄8 x 1⁄4 230 0.10 15⁄8 15⁄8
UNC threads only. 1
⁄2 x 3⁄8 730 0.21 21⁄8 21⁄8
A

100
www.anvilintl.com
PH-11.11

You might also like