Scribd Logo
Upload

Welcome to Scribd!

  • 82 views

    Bourdon Tube Pressure Gauge Stainless Steel Case Type 212.53 - Dry Case Type 213.53 - Liquid-Filled Case

    Uploaded by

    carlos
    The document summarizes a Bourdon tube pressure gauge. It is intended for use in adverse conditions with pulsating pressures and vibrations. It features a stainless steel case and is available with liquid filling to improve vibration and shock resistance. It has pressure ranges up to 15,000 psi and accuracy within 2% of the span.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bourdon Tube Pressure Gauge Stainless Steel Case Type 212.53 - Dry Case Type 213.53 - Liquid-Filled Case

    Uploaded by

    carlos
    82 views3 pages
    The document summarizes a Bourdon tube pressure gauge. It is intended for use in adverse conditions with pulsating pressures and vibrations. It features a stainless steel case and is available with liquid filling to improve vibration and shock resistance. It has pressure ranges up to 15,000 psi and accuracy within 2% of the span.

    Original Title

    21X_53_wika.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes a Bourdon tube pressure gauge. It is intended for use in adverse conditions with pulsating pressures and vibrations. It features a stainless steel case and is available with liquid filling to improve vibration and shock resistance. It has pressure ranges up to 15,000 psi and accuracy within 2% of the span.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    82 views3 pages

    Bourdon Tube Pressure Gauge Stainless Steel Case Type 212.53 - Dry Case Type 213.53 - Liquid-Filled Case

    Uploaded by

    carlos
    The document summarizes a Bourdon tube pressure gauge. It is intended for use in adverse conditions with pulsating pressures and vibrations. It features a stainless steel case and is available with liquid filling to improve vibration and shock resistance. It has pressure ranges up to 15,000 psi and accuracy within 2% of the span.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Mechanical

    Pressure Measurement

    Bourdon Tube Pressure Gauge


    Stainless Steel Case
    Type 212.53 - Dry Case
    Type 213.53 - Liquid-filled Case
    WIKA Datasheet 21X.53

    Applications

     Intended for adverse service conditions where pulsating


    or vibration exists (with liquid filling)
     Hydraulics & compressors
     Suitable for gaseous or liquid media that will not obstruct
    the pressure system

    Product Features

     Vibration and shock resistant (with liquid filling)


     Stainless steel case
     Pressure ranges up to 15,000 psi (1000 bar)
    Bourdon Tube Pressure Gauge Model 21X.53

    Specifications
    Design Operating temperature
    ASME B40.100 & EN 837-1 Ambient: -40°F to +140°F (-40°C to +60°C) - dry
    -4°F to +140°F (-20°C to +60°C) - glycerine filled
    Sizes -40°F to +140°F (-40°C to +60°C) - silicone filled
    2”, 2½” & 4” (50, 63 & 100 mm) Medium: +140°F (+60°C) maximum
    Accuracy class
    Temperature error
    2” & 2½”: ± 2/1/2% of span (ASME B40.100 Grade A)
    Additional error when temperature changes from reference
    4”: ± 1% of span (ASME B40.100 Grade 1A)
    temperature of 68°F (20°C) ±0.4% of span for every 18°F
    Ranges (10°K) rising or falling.
    Vacuum / Compound to 200 psi (16 bar)
    Weather protection
    Pressure from 15 psi (1 bar) to 15,000 psi (1000 bar)
    Weather tight (NEMA 4X / IP 66)
    Pressure from 15 psi (1 bar) to 10,000 psi (690 bar) - 2” size
    or other equivalent units of pressure or vacuum Pressure connection
    Material: copper alloy
    Working pressure
    Lower mount (LM) or center back mount (CBM) - 2” & 2½”
    2 & 2½”: Steady: ¾ full-scale value
    Lower mount (LM) or lower back mount (LBM) - 4”
    Fluctuating: 2
    /3 full-scale value
    ⅛” NPT, ¼” NPT or ½” NPT limited to wrench flat areaABS (2”
    Short time: full-scale value
    & 2½”) and white aluminum (4”)
    4”: Steady: full-scale value
    Fluctuating: 0.9 x full-scale value
    Short time: 1.3 x full-scale value

    WIKA Datasheet 21X.53 · 06/2015 Page 1 of 3


    R
    Bourdon tube dependent on the case fill):
    2” (50 mm) < 870 psi (60 bar): C-shape copper alloy  2½”: EPDM O-ring for Glycerine case fill; Viton O-ring for
    2” (50 mm) > 870 psi (60 bar): Helical copper alloy Silicone fill
    2½” (63 mm) < 870 psi (60 bar): C-shape copper alloy  4”: EPDM O-ring for Glycerine or Silicone case fill; Viton
    2½” (63 mm) > 870 psi (60 bar): Helical copper alloy O-ring for Halocarbon or Fluorolube fill
    2½” (63 mm) > 6000 psi (400 bar): Helical stainless steel
    4” (100 mm) < 1000 psi (70 bar): C-shape copper alloy Window
    4” (100 mm) > 1000 psi (70 bar): Helical stainless steel Polycarbonate with Buna-N gasket

    Case fill
    Movement Glycerine 99.7% - Type 213.53
    Copper alloy
    Optional extras
    Dial  Brass restrictor
    White ABS (2” & 2½”) and white aluminum (4”)  Stainless steel front or rear flange - 2½” & 4”
     Zinc-plated steel or SS U-clamp bracket (field installable)
    Pointer
     External zero adjustment (2½” only)
    Black aluminum
     Red drag pointer or mark pointer
     Silicone or Halocarbon oil case filling
    Case
     Special connections limited to wrench flat area
    304 stainless steel with vent plug and stainless steel crimp
     Custom dial layout
    ring. Suitable for liquid filling.
     Other pressure scales available
    bar, kPa, MPa, kg/cm² and dual scales
    Case connection sealed with O-ring, (O-ring material

    Page 2 of 3 WIKA Datasheet 21X.53 · 06/2015


    Dimensions

    Size
    A B C D E G H J K M N O S T W Weight
    2” mm 55 48 30 50 12 53 - 3.6 72 71 60 17 5.5 14 0.27 lb. dry
    in 2.17 1.89 1.18 1.97 0.47 2.09 - 0.14 2.83 2.80 2.36 2.80 0.22 ¼” 0.55 0.33 lb. filled
    2½” mm 69 54 32 62 13 54 - 3.6 72 88.1 75 85 6.5 14 0.36 lb. dry
    in 2.69 2.13 1.26 2.45 0.51 2.13 - 0.14 2.83 3.47 2.95 3.35 0.26 ¼” 0.55 0.44 lb. filled
    4” mm 107 87 48 100 15.5 79.5 30 4.8 109 132 116 132 8 22 1.10 lb. dry
    in 4.21 3.43 1.89 3.91 0.61 3.13 1.18 0.19 4.29 5.20 4.57 5.20 0.31 ½” 0.87 1.76 lb. filled

    Note: For ¼” NPT connections on 4” gauges, reduce B dimension by 5mm/0.2”

    Recommended panel cut-out:


    2”- U-clamp: 51mm 2½”- U-clamp: 63mm 4”- U-clamp: 101mm 4½”- panel mount adapter 104mm minimum
    front flange: n/a front flange: 65mm front flange: 104mm (not shown)

    WIKA Datasheet 21X.53 · 06/2015 Page 3 of 3

    WIKA Instrument Corporation


    1000 Wiegand Boulevard
    Lawrenceville, GA 30043-5868
    Tel: 888-WIKA-USA • 770-513-8200
    Fax: 770-338-5118
    E-Mail: [email protected]
    www.wika.com

    You might also like