Scribd Logo
Upload

Welcome to Scribd!

  • 420 views

    CLA-VAL 311C/D: Standard Solenoid Valve 3/2 Lucifer

    Uploaded by

    jajaka
    This document provides information on a 3/2 solenoid valve. It describes the valve's components, operation, dimensions, technical specifications, and options. The valve uses a solenoid coil to open or close fluid passages via a plunger. It can be used with air or neutral liquids and has a nickel-plated brass or stainless steel body. Explosion-proof solenoid options are also available.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CLA-VAL 311C/D: Standard Solenoid Valve 3/2 Lucifer

    Uploaded by

    jajaka
    420 views3 pages
    This document provides information on a 3/2 solenoid valve. It describes the valve's components, operation, dimensions, technical specifications, and options. The valve uses a solenoid coil to open or close fluid passages via a plunger. It can be used with air or neutral liquids and has a nickel-plated brass or stainless steel body. Explosion-proof solenoid options are also available.

    Original Description:

    311E

    Original Title

    311E

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on a 3/2 solenoid valve. It describes the valve's components, operation, dimensions, technical specifications, and options. The valve uses a solenoid coil to open or close fluid passages via a plunger. It can be used with air or neutral liquids and has a nickel-plated brass or stainless steel body. Explosion-proof solenoid options are also available.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    420 views3 pages

    CLA-VAL 311C/D: Standard Solenoid Valve 3/2 Lucifer

    Uploaded by

    jajaka
    This document provides information on a 3/2 solenoid valve. It describes the valve's components, operation, dimensions, technical specifications, and options. The valve uses a solenoid coil to open or close fluid passages via a plunger. It can be used with air or neutral liquids and has a nickel-plated brass or stainless steel body. Explosion-proof solenoid options are also available.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3
    At a glance
    Powered by AI
    The key takeaways are that solenoid valves use magnetic force to control fluid flow by opening and closing orifices, and consist of a body, coil, and housing. They are used for applications such as controlling air or liquid flow.

    The main components of a solenoid valve are the body, coil or coil housing, and the housing or nut/nameplate fixing elements. These components can often be interchanged.

    In a direct operated solenoid valve, the magnetic force is used directly to open or close the fluid passage by acting on the plunger sealing.

    CLA-VAL 311C/D

    Standard Solenoid Valve 3/2 Lucifer

    ` GENERAL APPLICATION VALVES 3/2 - DIRECT OPERATED

    Solenoid valves are electro-mechanical devices that control fluid flow. This is
    achieved by opening or closing one or several orifices in the solenoid valve. The
    (solenoid) coil is the electrical element that converts an electrical signal into a
    mechanical force which, in turn, shifts the mobile plunger that opens or closes
    an orifice (nozzle) by means of its seat disc(s). Solenoid valves are usually
    constructed from 3 distinct components:

    • The body (including the sleeve assembly)


    • The coil (or coil housing)
    • The housing (or nut/nameplate fixing elements).

    These 3 modular components are in many cases interchangeable i.e. a valve


    body can be used with a number of coil/housing combinations.
    Fig. 1

    ` DIRECT OPERATED VALVES (SEE FIG. 1)

    The magnetic force is used directly to open or close the passage of fluid at the plunger sealing. The performance is limited
    by the available performance of the coil (limits of pressure/orifice size.)The pressure rating of the valve starts from zero bar
    to the maximum value.

    ` DIMENSIONS

    ` CLA-VAL Europe www.cla-val.ch [email protected] 1 - ELE311TE A 12/08


    CLA-VAL 311C/D
    Standard Solenoid Valve 3/2 Lucifer

    ` TECHNICAL DATA

    Function: 3/2 Universal solenoid valve: closed or open when de-energized

    Open: Closed:
    De-energized De-energized

    Valve design: Direct operated poppet valve


    Port size: G 1/8
    Mounting position: Unrestricted
    Material specifications: Brass nickel plated body or stainless steel SS316. Internal parts from stainless steel
    • The manual override allows to feign the switched on of the solenoid valve.
    Manual override: • The manual override situated on the body of the solenoid valve is activated by a clockwise
    screw rotation (1/4 turn).
    • dP min = 0 bar
    Safe body working pressure:
    • dP max = 30 bar
    • With DC supply: Switch on time 15 ms - Switch off time 10 ms
    Response time (for air):
    • With AC supply: Switch on time 10 ms - Switch off time 10 ms
    Cycling rate: Up to 2000 cycles per minute
    Dry or lubricated air, inert gases, neutral liquids, mineral and fuel oils up to 76 cSt (10°E)
    Media:
    viscosity
    Ambient temperature: -10°C to + 50°C
    Standard coil 2995/481865, 483510 encapsulated in synthetic material. Electrical connection
    Electrical parts:
    with plug 2P + E, DIN 43650 type A. Degree of protection IP65.
    Coil housings with degree of protection IP67, large choice of «explosion proof» electrical parts,
    Special protections:
    available on request.
    Voltages: CC: 12/24/48/110V - CA/50Hz: 24/48/110/220-30
    Class of insulation material: Class F 155°C
    Solenoid duty: Continuous duty solenoid
    Power rating: 8-14 W
    Voltage tolerance: -10% to +10% of nominal

    ` SPECIFICATIONS FOR STANDARD COIL

    This coil conforms to the IEC/CENELEC safety standards and complies with European low-voltage directive 73/23/EC.
    Electrical power
    Ambient temperature
    Electrical connection
    Degree of protection

    Class of insulation

    DC AC
    Specifications

    Attraction cold
    P (cold) 20°C

    Pn (holding)
    Pn (hot)

    IP65 according to Trough a 2 P +


    IEC/EN 60529 F E plug according -40°C to 26 VA /
    Standard 9W 12 W 8W
    standards (with 155°CF to DIN 43650 +50°C- (9 W)
    plug connection) type A

    ` CLA-VAL Europe www.cla-val.ch [email protected] 2 - ELE311TE A 12/08


    CLA-VAL 311C/D
    Standard Solenoid Valve 3/2 Lucifer

    ` OPTION: EXPLOSION-PROOF SOLENOIDS II 2 G EEX DM IIC T4

    Explosionproof solenoids with flameproof enclosure/encapsulation “dm”


    According to ATEX directive 94/9/EC and Standards EN 50014, EN 50018, EN 50028 and EN 50281-1-1.

    Application:
    Control of solenoid valves intended for installations in hazardous areas in which explosive gas-atmospheres are present, i.e.
    zones 1 or zones 2 (ATEX: Group II, apparatus categories 2G or 3G).
    The enclosure of these explosion proofs solenoids "dm" is made entirely in synthetic material. All external metallic
    components in contact with the atmosphere are made in stainless steel. The integrated sealing and O-rings assure the
    degree of protection IP67. Therefore, these products took into account not only the suitability with hazardous areas but also
    extremely corrosive environment, e. g. Chemical, Petrochemical and Refineries industries (CPR). Due to the compact size
    and easy cable connection by screw terminals, these solenoids may be mounted in confined spaces.

    Features:
    The coil winding (copper wires of insulation Class H) and magnetic iron path are encapsulated in synthetic material Class H
    and meet "m" protection. The connection box and cover of selected high quality synthetic material (Class H) in order to meet
    the standard EN 50018 for type of protection "d" flameproof enclosure. The cable gland assembly M20x1.5 makes part of
    the "d" certificated enclosure. The solenoids are provided with an embedded non-resetting thermal fuse to prevent
    excessive heating, i.e. assuring the maximum allowed surface temperatures T5/T4. A varistor for peak voltages suppression
    is potted-in, in Epoxy resin Class H.

    Reference: 495905
    Approval / Type of protection: LCIE 02 ATEX 6451 X Gas II 2 G – EEx dm IIC T4
    Degree of protection: IP67
    Ambiant temperature: -40 to +65 °C
    Insulation Class: H (180 °)
    Electric connection is done in the connection box on an easily accessible
    connector terminal. The introduction of the cable (Ø min 7mm, Ø max. 9mm,
    Electrical connection:
    section max. 2.5mm²) in the connection box passes by the built in M20x1.5
    cable gland.
    DC Pn (hot) 8W P (cold) 20°C 9W
    Electr. Power:
    AC Pn (holding) 8W Attraction cold 9W
    Nominal voltage: 6 to 110 VCC 12 to 240 VCA
    Voltage tolerance: ± 10 % of the nominal voltage
    Solenoid duty: Continuous duty solenoid (ED 100%)

    ` CLA-VAL Europe www.cla-val.ch [email protected] 3 - ELE311TE A 12/08

    You might also like