Scribd Logo
Upload

Welcome to Scribd!

  • 67 views

    Height Control Indicator Lamp Circuit

    Uploaded by

    bob loblaw
    This document provides instructions for diagnosing issues with the air suspension height control indicator lamp circuit. It describes the circuit, including that the vehicle height is controlled by pressing the "HIGH" button and the height is displayed on the multi-information display. It details inspecting the harness and connectors between the suspension control ECU and combination meter assembly, and between the combination meter and body ground, checking for resistance below 1 ohm. If resistance is not within spec, the harness or connector should be repaired or replaced before proceeding to check other circuits.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Height Control Indicator Lamp Circuit

    Uploaded by

    bob loblaw
    67 views2 pages
    This document provides instructions for diagnosing issues with the air suspension height control indicator lamp circuit. It describes the circuit, including that the vehicle height is controlled by pressing the "HIGH" button and the height is displayed on the multi-information display. It details inspecting the harness and connectors between the suspension control ECU and combination meter assembly, and between the combination meter and body ground, checking for resistance below 1 ohm. If resistance is not within spec, the harness or connector should be repaired or replaced before proceeding to check other circuits.

    Original Description:

    ls430

    Original Title

    HCILC

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for diagnosing issues with the air suspension height control indicator lamp circuit. It describes the circuit, including that the vehicle height is controlled by pressing the "HIGH" button and the height is displayed on the multi-information display. It details inspecting the harness and connectors between the suspension control ECU and combination meter assembly, and between the combination meter and body ground, checking for resistance below 1 ohm. If resistance is not within spec, the harness or connector should be repaired or replaced before proceeding to check other circuits.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    67 views2 pages

    Height Control Indicator Lamp Circuit

    Uploaded by

    bob loblaw
    This document provides instructions for diagnosing issues with the air suspension height control indicator lamp circuit. It describes the circuit, including that the vehicle height is controlled by pressing the "HIGH" button and the height is displayed on the multi-information display. It details inspecting the harness and connectors between the suspension control ECU and combination meter assembly, and between the combination meter and body ground, checking for resistance below 1 ohm. If resistance is not within spec, the harness or connector should be repaired or replaced before proceeding to check other circuits.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    05−389

    DIAGNOSTICS − AIR SUSPENSION SYSTEM 05GQ1−01

    HEIGHT CONTROL INDICATOR LAMP CIRCUIT

    CIRCUIT DESCRIPTION
    The vehicle height is controlled by pressing the ”HIGH” button of the height control switch, ”Height Hi” is dis-
    played on the multi−information display.
    WIRING DIAGRAM

    C12 Air Suspension ECU


    Combination Meter (Suspension Control ECU)

    1
    CPU
    19
    P
    A20 VH
    17

    Passenger Side J/B

    6 15
    W−B W−B
    PF PF
    11
    MULTI−DISPLAY

    J/C
    B D
    Y Y
    J16 J17 To Battery
    II

    F45840

    Author: Date: 561


    05−390
    DIAGNOSTICS − AIR SUSPENSION SYSTEM

    INSPECTION PROCEDURE
    1 CHECK HARNESS AND CONNECTOR(SUSPENSION CONTROL ECU −
    COMBINATION METER ASSY) (SEE PAGE 01−41)

    Suspension Control ECU: (a) Disconnect the suspension control ECU A20 connector.
    (b) Disconnect the combination meter assy C12 connector.
    (c) Measure the resistance according to the value(s) in the
    table below.
    Standard:
    Tester Connection Specified Condition
    A20−19 (VH) − C12−17 Below 1 Ω
    A20−19 (VH) − Body ground 10 kΩ or higher

    A20
    VH

    G25094 F44492

    Combination Meter Assy:

    C12

    17

    NG REPAIR OR REPLACE HARNESS OR


    F45841 CONNECTOR

    OK

    2 CHECK HARNESS AND CONNECTOR(COMBINATION METER ASSY − BODY


    GROUND) (SEE PAGE 01−41)

    Combination Meter Assy: (a) Measure the resistance according to the value(s) in the
    table below.
    C12
    Standard:
    Tester Connection Specified Condition
    C12−11 − Body ground Below 1 Ω

    11
    NG REPAIR OR REPLACE HARNESS OR
    F45841 CONNECTOR

    OK

    PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE


    (SEE PAGE 05−304)

    Author: Date: 562

    You might also like