Scribd Logo
Upload

Welcome to Scribd!

  • 203 views

    C1786 PDF

    Uploaded by

    bob loblaw
    This document provides diagnostics information for DTC C1786 related to the air suspension height control switch circuit. It describes the circuit, lists the potential trouble areas as the height control switch or suspension control ECU, and provides a 4-step inspection procedure to diagnose the issue. The procedure includes checking the switch operation on the tester, inspecting the switch resistance values, checking harness and connector resistances between components, and directing to replace the suspension control ECU if no other issues are found.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    C1786 PDF

    Uploaded by

    bob loblaw
    203 views3 pages
    This document provides diagnostics information for DTC C1786 related to the air suspension height control switch circuit. It describes the circuit, lists the potential trouble areas as the height control switch or suspension control ECU, and provides a 4-step inspection procedure to diagnose the issue. The procedure includes checking the switch operation on the tester, inspecting the switch resistance values, checking harness and connector resistances between components, and directing to replace the suspension control ECU if no other issues are found.

    Original Title

    C1786.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides diagnostics information for DTC C1786 related to the air suspension height control switch circuit. It describes the circuit, lists the potential trouble areas as the height control switch or suspension control ECU, and provides a 4-step inspection procedure to diagnose the issue. The procedure includes checking the switch operation on the tester, inspecting the switch resistance values, checking harness and connector resistances between components, and directing to replace the suspension control ECU if no other issues are found.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    203 views3 pages

    C1786 PDF

    Uploaded by

    bob loblaw
    This document provides diagnostics information for DTC C1786 related to the air suspension height control switch circuit. It describes the circuit, lists the potential trouble areas as the height control switch or suspension control ECU, and provides a 4-step inspection procedure to diagnose the issue. The procedure includes checking the switch operation on the tester, inspecting the switch resistance values, checking harness and connector resistances between components, and directing to replace the suspension control ECU if no other issues are found.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    05−383

    DIAGNOSTICS − AIR SUSPENSION SYSTEM 05CI7−02

    DTC C1786 HEIGHT CONTROL SWITCH CIRCUIT (TEST


    DIAGNOSIS)

    CIRCUIT DESCRIPTION
    The height control switch turns on when it is pressed to the ”HIGH” side and turns off when pressed to the
    ”NORM” side. The ECU detects the height control switch condition and raises or lowers the vehicle height
    accordingly.
    By controlling the height control switch, the vehicle height can be set 30 mm (1.18 in.) higher in ”HIGH” mode.
    DTC No. DTC Detecting Condition Trouble Area
    S Height control switch
    C1786 Height control switch signal does not change. S Height control switch circuit
    S Suspension control ECU

    HINT:
    DTC C1786 is output only in the test mode.
    WIRING DIAGRAM
    Air Suspension ECU
    (Suspension Control ECU)
    H21
    J12
    Height Control SW
    J/C
    15
    W−B LG−B LG−B
    A20 HSW
    2 4 E E

    IK

    F45836

    Author: Date: 555


    05−384
    DIAGNOSTICS − AIR SUSPENSION SYSTEM

    INSPECTION PROCEDURE

    1 READ VALUE ON HAND−HELD TESTER

    (a) Connect the hand−held tester to the DLC3.


    (b) Turn the ignition switch to the ON position and turn the hand−held tester main switch on.
    (c) Select the item below in the DATA LIST and read its value displayed on the hand−held tester.
    AIRSUS:
    Item Normal Condition
    ON: Height control switch while pressing ”HIGH”
    HEIGHT SWITCH
    OFF: Height control switch while pressing ”NORM”

    (d) Check that the value displayed on the hand−held tester changes by pressing the height control switch
    ”HIGH” or ”NORM” button.
    OK:
    Height control switch value changes.

    NG Go to step 2

    OK

    REPLACE SUSPENSION CONTROL ECU (SEE PAGE 25−20)

    2 INSPECT HEIGHT CONTROL SWITCH

    Height Control Switch: (a) Disconnect the height control switch connector.
    ”HIGH” Button (b) Measure the resistance according to the value(s) in the
    HSW table below.
    Standard:
    Switch Condition Tester Connection Specified Condition
    ”HIGH” 2 (IGH) − 4 (HSW) Below 1 Ω
    ”NORM” 2 (IGH) − 4 (HSW) 10 kΩ or higher

    IGH NG REPLACE HEIGHT CONTROL SWITCH


    ”NORM” Button
    F45837

    OK

    Author: Date: 556


    05−385
    DIAGNOSTICS − AIR SUSPENSION SYSTEM

    3 CHECK HARNESS AND CONNECTOR(SUSPENSION CONTROL ECU − HEIGHT


    CONTROL SWITCH) (SEE PAGE 01−41)

    Suspension Control ECU: (a) Disconnect the suspension control ECU A20 connector.
    (b) Measure the resistance according to the value(s) in the
    table below.
    Standard:
    Tester Connection Specified Condition
    A20−15 (HSW) − H21−4 (HSW) Below 1 Ω
    A20−15 (HSW) − Body ground 10 kΩ or higher

    A20 HSW
    G25094 F44492

    Height Control Switch:

    HSW

    H21

    NG REPAIR OR REPLACE HARNESS OR


    F45850
    CONNECTOR

    OK

    4 CHECK HARNESS AND CONNECTOR(HEIGHT CONTROL SWITCH − BODY


    GROUND) (SEE PAGE 01−41)

    Height Control Switch: (a) Measure the resistance according to the value(s) in the
    table below.
    Standard:
    Tester Connection Specified Condition
    H21−2 (IGN) − Body ground Below 1 Ω
    H21

    IGN NG REPAIR OR REPLACE HARNESS OR


    F45850 CONNECTOR

    OK

    REPLACE SUSPENSION CONTROL ECU (SEE PAGE 25−20)

    Author: Date: 557

    You might also like