EN EN: European Commission

Download as pdf or txt
Download as pdf or txt
You are on page 1of 16

EUROPEAN

COMMISSION

Brussels, 16.1.2018
SWD(2018) 36 final

PART 1/3

COMMISSION STAFF WORKING DOCUMENT

Report on Critical Raw Materials and the Circular Economy

EN EN
Table of Contents

1. INTRODUCTION ....................................................................................................... 4
1.1. Critical raw materials ........................................................................................ 4
1.1.1. Background and definition .................................................................. 4
1.1.2. Global situation in supply and trade .................................................... 6
1.2. Circular economy .............................................................................................. 8
1.2.1. Background and definition .................................................................. 8
1.2.2. Current circular use of critical raw materials ...................................... 9
1.2.3. Benefits of a more circular use .......................................................... 10
2. GENERAL POLICY MEASURES........................................................................... 11
2.1. Waste Framework Directive ............................................................................ 11
2.2. Circular Economy Finance Support Platform ................................................. 12
2.3. Horizon 2020 ................................................................................................... 12
2.4. Best practices ................................................................................................... 13
2.5. Possible further actions.................................................................................... 13
3. KEY ACTORS AND PROJECTS IN THE EU ........................................................ 13
3.1. The European Innovation Partnership on Raw Materials................................ 13
3.2. The Ad hoc Working Group on Critical Raw Materials ................................. 14
3.3. The European Institute of Innovation and Technology: Raw Materials
Knowledge and Innovation Community (EIT Raw Materials) ....................... 14
3.4. SCRREEN: the European Expert Network on Critical Raw Materials ................. 14
3.5. ERECON: The European Rare Earths Competency Network (2013-
2015) ................................................................................................................ 15
3.6. Other Horizon 2020 and LIFE projects ........................................................... 15
4. DATA SOURCES AND MONITORING ................................................................ 16
4.1. Multi-sector data sources ................................................................................. 16
4.1.1. The EU Raw Materials Information System including the
CRM fact sheets ................................................................................ 16
4.1.2. Material System Analysis .................................................................. 17
4.1.3. ProSUM ............................................................................................. 17
4.1.4. General sources ................................................................................. 18
4.2. Monitoring progress ........................................................................................ 19
4.2.1. The Raw Materials Scoreboard ......................................................... 19
4.2.2. The Circular Economy Monitoring Framework ................................ 20

1
5. KEY SECTORS (SUPPLY AND DEMAND OF CRITICAL RAW
MATERIALS) ........................................................................................................... 21
5.1. Mining ............................................................................................................. 21
5.1.1. Data and data sources ........................................................................ 21
5.1.2. Existing EU policies .......................................................................... 23
5.1.3. Circular Economy Action Plan .......................................................... 24
5.1.4. Cooperation with advanced mining countries outside the EU .......... 24
5.1.5. Best Practices..................................................................................... 25
5.1.6. Possible further actions...................................................................... 26
5.2. Landfills ........................................................................................................... 26
5.2.1. Data and data sources ........................................................................ 26
5.2.2. Existing EU policies .......................................................................... 28
5.2.3. Circular Economy Action Plan .......................................................... 28
5.2.4. Best Practices..................................................................................... 29
5.2.5. Possible further actions...................................................................... 29
5.3. Electrical and Electronic Equipment ............................................................... 30
5.3.1. Data and data sources ........................................................................ 30
5.3.2 Existing EU policies .......................................................................... 36
5.3.3 Circular Economy Action Plan .......................................................... 37
5.3.4 Best Practices..................................................................................... 37
5.3.5 Possible further actions...................................................................... 38
5.4 Batteries ........................................................................................................... 38
5.4.1 Data and data sources ........................................................................ 38
5.4.2 Existing EU policies .......................................................................... 43
5.4.3 Circular Economy Action Plan .......................................................... 43
5.4.4 Best Practices..................................................................................... 43
5.4.5 Possible further actions...................................................................... 44
5.5 Automotive sector ........................................................................................... 44
5.5.1 Data and data sources ........................................................................ 44
5.5.2 Existing EU policies .......................................................................... 48
5.5.3 Circular Economy Action Plan .......................................................... 48
5.5.4 Best Practices..................................................................................... 49
5.5.5 Possible further actions...................................................................... 50
5.6 Renewable energy ........................................................................................... 50
5.6.1 Data and data sources ........................................................................ 50
5.6.2 Existing EU policies .......................................................................... 54

2
5.6.3 Best Practices..................................................................................... 54
5.6.4 Possible further actions...................................................................... 54
5.7 Defence industry .............................................................................................. 55
5.7.1 Data and data sources ........................................................................ 55
5.7.2 Existing EU policies .......................................................................... 58
5.7.3 Best Practices..................................................................................... 58
5.7.4 Possible further actions...................................................................... 58
5.8 Chemicals and fertilisers ................................................................................. 59
5.8.1 Data and data sources ........................................................................ 59
5.8.2 Existing EU policies .......................................................................... 61
5.8.3 Circular Economy Action Plan .......................................................... 62
5.8.4 Best Practices..................................................................................... 62
5.8.5 Possible further actions...................................................................... 62
6 CONCLUSIONS AND OUTLOOK ......................................................................... 62
Annex I. Major applications of CRMs and information on recycling (JRC
elaboration based on the 2017 CRM study and on the MSA study 2015)........... 63
Annex II. Examples of CRMs discussed in Ecodesign preparatory studies ............. 66
Annex III. Overview of possible further actions by sector and EU policy area............. 67

3
1. INTRODUCTION
This report has been produced under the Action Plan on Circular Economy (see Section
1.2.1) in which the Commission set out to issue a report on critical raw materials and the
circular economy in 2017, in order to ensure a coherent and effective approach, provide
key data sources, promote best practices and identify possible further actions.
The report should be seen in the context of the political priorities of the Commission –
especially relevant are the priorities on jobs, growth and investment, Energy Union and
climate, the internal market, trade policy and global efforts on sustainable development.
More specifically, it supports implementation of the renewed EU Industrial Policy
Strategy1 presented by President Juncker in his State of the Union Address 2017. The
renewed strategy highlights the importance of adapting to changes brought on by the
transition to a low-carbon and more circular economy, as well as the strategic importance
of raw materials for the EU manufacturing industry.
This report is based on a recently published JRC report2, especially for the sectorial
analysis presented in Section 5.
1.1. Critical raw materials
1.1.1. Background and definition
Raw materials are essential for the production of a broad range of goods and applications
used in everyday life. They are intrinsically linked to all industries across all supply
chain stages. They are crucial for a strong European industrial base, an essential
building block of the EU's growth and competitiveness. The accelerating technological
innovation cycles and the rapid growth of emerging economies have led to a steadily
increasing demand for these highly sought after metals and minerals. The future global
resource use could double between 2010 and 20303.
To address the growing concern of securing valuable raw materials for the EU economy,
the Commission launched the European Raw Materials Initiative in 2008. It is an
integrated strategy that establishes targeted measures to secure and improve access to raw
materials for the EU. One of the priority actions of the Initiative was to establish a list of
Critical Raw Materials (CRMs) at the EU level.
The fact that the most recent list of critical raw materials for the EU was adopted together
with the renewed EU Industrial Policy Strategy on 13 September 2017 reflects the high
importance that the Commission continues to attach to the list. The Commission is also
engaged in a dialogue on critical raw materials with the US and Japan - the seventh
annual meeting and conference took place in Pittsburgh on 12 October 2017.
CRMs are particularly important for high tech products and emerging innovations -
technological progress and quality of life are reliant on access to a growing number of
raw materials. For example, a smartphone might contain up to 50 different metals, all of
which giving different properties such as light weight and user-friendly small size. CRMs
are irreplaceable in solar panels, wind turbines, electric vehicles, and energy efficient
lighting and are therefore also very relevant for fighting climate change and for
improving the environment.4 For example, the production of low-carbon technologies –
1
Communication "Investing in a smart, innovative and sustainable industry", COM(2017) 479
2
Critical Raw Materials and the Circular Economy. Background report. JRC Science-for-Policy Report. December 2017, EUR
28832 EN, http://dx.doi.org/10.2760/378123, JRC108710.
3
Decoupling natural resource use and environmental impacts from economic growth. A Report of the Working Group on
Decoupling to the International Resource Panel. UNEP.
4
https://ec.europa.eu/growth/sectors/raw-materials/specific-interest/critical_en

4
necessary for the EU to meet its climate and energy objectives – is expected to increase
the demand for certain raw materials by a factor of 20 by 20305.
The list of Critical Raw Materials contains raw materials which reach or exceed
thresholds for both economic importance and supply risk.6 The Commission
established the first list in 2011 and committed to update it at least every three years to
reflect market, production and technological developments.7 The first assessment,
conducted in 2011, identified 14 CRMs out of the 41 non-energy, non-agricultural raw
materials assessed. In the 2014 exercise, 20 raw materials were identified as critical out
of the 54 materials assessed.8
In the 2017 exercise, 27 CRMs were identified using a revised methodology for an
assessment of 61 raw materials (comprising 58 individual and 3 grouped materials,
altogether 78 individual materials). 9
Critical Raw Materials

Antimony Fluorspar LREEs Phosphorus

Baryte Gallium Magnesium Scandium

Beryllium Germanium Natural graphite Silicon metal

Bismuth Hafnium Natural rubber Tantalum

Borate Helium Niobium Tungsten

Cobalt HREEs PGMs Vanadium

Coking coal Indium Phosphate rock

Table 1: The 2017 List of Critical Raw Materials to the EU (HREEs = Heavy Rare Earth Elements10,
LREEs = Light Rare Earth Elements11, PGMs = Platinum Group Metals12)
The revised methodology13 brought several improvements: systematic screening of the
most critical points in the supply chain (mining/extracting and processing/refining);
inclusion of an import reliance parameter and a trade-related parameter based on export
restrictions and the EU trade agreements; considering also the actual sourcing of the
material to the EU (domestic production plus imports), not only the global supply;
inclusion of substitution in both supply risk and economic importance and improving the
calculations, while the previous assessments only addressed substitution in the supply
risk; more specific allocation of raw materials to the relevant end-use applications and
corresponding manufacturing sectors, instead of mega sectors etc.
5
EU Raw Materials Scoreboard 2016. https://publications.europa.eu/en/publication-detail/-/publication/1ee65e21-9ac4-11e6-
868c-01aa75ed71a1/language-en
6
The assessment is based on historical data rather than forecasts.
7
Communication "Tackling the challenges in commodity markets and on raw materials", COM(2011) 25
8
Communication "On the review of the list of CRM for the EU and the implementation of the Raw Materials Initiative",
COM(2014) 297
9
Communication on the 2017 list of Critical Raw Materials for the EU, COM(2017) 490
10
dysprosium, erbium, europium, gadolinium, holmium, lutetium, terbium, thulium, ytterbium, yttrium
11
cerium, lanthanum, neodymium, praseodymium, samarium
12
iridium, platinum, palladium, rhodium, ruthenium
13
https://publications.europa.eu/en/publication-detail/-/publication/2d43b7e2-66ac-11e7-b2f2-01aa75ed71a1/language-en/format-
PDF http://www.sciencedirect.com/science/article/pii/S0301420717300223?via%3Dihub

5
1.1.2. Global situation in supply and trade
The European industry is dominated by the manufacturing industry (i.e. the manufacture
of end products and applications) and also the refining industry (metallurgy, etc.),
compared to the extractive industry (mine and carriers). The value chain of CRMs is not
fully and homogeneously covered by the European industry. Pronounced imbalance
exists between the upstream steps (extraction / harvesting) and the downstream steps
(manufacturing and use). Considering the very limited supply of CRMs from secondary
sources14 (see Fig. 5 and Fig. 7), the need for access to primary sources, including ores,
concentrates, processed or refined materials is huge and crucial for the wealth – and even
the survival – of European industries and their associated jobs and economic benefits.
The majority of these primary raw materials are produced and supplied from non-
European countries.

Figure 1: Contribution of primary global suppliers of critical raw materials, average from 2010-2014

14
I.e. from recycling of waste

6
Figure 2: Contribution of countries accounting for largest share of supply of primary CRMs to the
EU, average from 2010-2014
Although China is also the principal supplier of CRMs to the EU, the analysis highlights
several other countries that represent important shares of the EU supply for specific
CRMs, such as the USA (beryllium and helium), Russia (cobalt and scandium) and
Mexico (fluorspar and tungsten). The revised methodology incorporates actual sourcing
to the EU, therefore allows for a more realistic picture of Europe’s supply of the raw
materials assessed.

For many CRMs the upstream steps of the value chain are not present in the EU:
antimony, beryllium, borates, magnesium, niobium, PGMs, phosphorus, rare earths,
scandium, tantalum and vanadium. This is due either to the absence of those materials in
the European ground or to economic and societal factors that negatively affect the
exploration (for deposit discovery and characterisation, estimation of resources and
reserves) or the extraction (closure of existing mines, reluctance to open new mines, etc.).
In addition to abiotic raw materials, natural rubber is also grown and harvested entirely
outside the EU.
To access those primary CRMs, the EU has currently no other choice than importing the
ores and concentrates or the refined materials from other countries to feed its industries
and markets.

Hafnium is the only CRM for which an EU Member State (France) is the global main
producer. For hafnium and indium, the Member States produce enough primary materials
to avoid significant extra-European imports.

7
Figure 3: EU production of primary CRMs in tonnes (and share of supply to EU), average from
2010-2014

1.2. Circular economy


1.2.1. Background and definition
On 2 December 2015, the Commission adopted a Circular Economy package consisting
of a Communication and an action plan15 and proposals for revised legislation on waste16.
It indicated that 'the transition to a more circular economy, where the value of products,
materials and resources is maintained in the economy for as long as possible, and the
generation of waste minimised, is an essential contribution to the EU's efforts to develop
a sustainable, low carbon, resource efficient and competitive economy.'
The actions support the circular economy in each step of the value chain – from
production to consumption, repair and remanufacturing, waste management, and
secondary raw materials that are fed back into the economy.

15
COM(2015) 614
16
COM(2015) 593, COM(2015) 594, COM(2015) 595 and COM(2015) 596

8
Figure 4: Conceptual diagram illustrating the Circular Economy in a simplified way
Economic actors, such as business and consumers, are key in driving this process. Local,
regional and national authorities are enabling the transition, but the EU also has a
fundamental role to play in supporting it. The aim is to ensure that the right regulatory
framework is in place for the development of the circular economy in the single market,
and to give clear signals to economic operators and society at large on the way forward
with long term waste targets as well as a concrete, broad and ambitious set of actions, to
be carried out before 2020. Action at EU level will drive investments and create a level
playing field, remove obstacles stemming from European legislation or inadequate
enforcement, deepen the single market, and ensure favourable conditions for innovation
and the involvement of all stakeholders.
1.2.2. Current circular use of critical raw materials
While there is no universally agreed definition of 'circular use' of raw materials, the share
of secondary sources in raw material supply is one of several simplified approaches to
assess circular use.
Although several CRMs have a high technical and real economic recycling potential, and
despite the encouragement from governments to move towards a circular economy, the
recycling input rate (a measure of the share of secondary sources in raw material supply)
of CRMs is generally low (see Fig. 5). This can be explained by several factors: sorting
and recycling technologies for many CRMs are not available yet at competitive costs; the
supply of many CRMs is currently locked up in long-life assets, hence implying delays
between manufacturing and scrapping which negatively influences present recycling
input rates; demand for many CRMs is growing in various sectors and the contribution
from recycling is largely insufficient to meet the demand.

9
50%

44%

42%
45%

35%
40%
35%

28%
30%
25%

17%
20%

13%

11%
15%

7%

6%
10%

3%

2%

1%
5%

0%
0%

HREEs
Cobalt

PGMs

LREEs
Tungsten

Antimony

Germanium

Be, Borate, Ga, In, Nb, P, Sc,


Vanadium

Phosphate rock

Magnesium

Natural graphite

Baryte, Bi, Fluorspar, Hf, He,


Natural rubber, Ta

Si-metal
Figure 5: Current contribution of recycling to meet EU demand of CRMs: End-Of-Life recycling
Input Rate (EOL-RIR) (JRC elaboration based on the 2017 CRM study and on the MSA study 2015)
A few CRMs, namely Vanadium, Tungsten, Cobalt and Antimony have a high recycling
input rate. Other CRMs have a good rate of recycling at end-of-life (e.g. recycling rates
for PGMs reaches up to 95% for industrial catalysts and 50-60% for automotive
catalysts) but this gives a contribution that is largely insufficient to meet the growing
demand and thus the recycling input rate is low (e.g. 14% for PGMs).
As a summary, the circular use of CRMs depends on many parameters. It should be
pointed out that circularity is very much influenced by the sectors in which CRMs are
used: the demand and the duration of the use of the CRMs is strictly dependant on the
products that the CRMs are embodied in, recycling rates usually depend on the nature of
the end-of-life products the CRMs are embodied in; moreover, circularity of several
CRMs strongly benefits from take back-scheme that are implemented in various sectors.
(See Section 5 of this report for key sector overviews.) The need to adopt a sectorial
analysis for the analysis of flows of CRMs, including considering circularity aspects, was
confirmed by a recent report of the SCRREEN project (see Section 3.4).17
1.2.3. Benefits of a more circular use
Just as extraction of primary CRMs in Europe helps to ensure security of supply of raw
materials to European industry, so does their resource efficient management throughout
the lifecycle and the recycling of waste into secondary CRMs. Consequently, substitution
and recycling are considered as risk reducing measures in the methodology for
establishing the EU list of Critical Raw Materials18.

17
Report on the current use of critical raw materials. http://scrreen.eu/wp-content/uploads/2017/01/SCRREEN-D2.1-Report-on-
the-current-use-of-critical-raw-materials.pdf
18
http://publications.europa.eu/en/publication-detail/-/publication/2d43b7e2-66ac-11e7-b2f2-01aa75ed71a1/language-en/format-
PDF/source-32064602

10
Energy use (and associated CO2 emissions and other emissions to air) and water use
are typically much lower for secondary CRMs than for primary CRMs. Some examples
are given in Table 2.
Metal Energy use Water use

(MJ per kg of metal extracted) (m3 per tonne of metal extracted)

Scrap Ores Scrap Ores

Magnesium 10 165-230 2 2-15

Cobalt 20-140 140-2100 30-100 40-2000

PGM 1400-3400 18,860-254,860 3000-6000 100,000-


1200,000

Rare Earths 1000-5000 5500-7200 250-1250 1275-1800

Table 2: Energy and water consumption in production of metals from scrap and ores (range given is
high to low grade)19
Other environmental benefits of a more circular use may include for instance lower
impacts on the biosphere (rainforests, arctic regions, ocean floors etc.) and/or less waste
produced per tonne of material extracted.
2. GENERAL POLICY MEASURES
2.1. Waste Framework Directive
The Waste Framework Directive20 provides for a general framework of waste
management requirements and sets the basic waste management definitions for the EU.
As for its future direction, the 7th Environment Action Programme sets the following
priority objectives for waste policy in the EU:
 To reduce the amount of waste generated;
 To maximise recycling and re-use;
 To limit incineration to non-recyclable materials;
 To phase out landfilling to non-recyclable and non-recoverable waste;
 To ensure full implementation of the waste policy targets in all Member States.
Following a review of the Directive, the Commission adopted a proposal for changes to
the Directive in December 2015 as part of its Circular Economy package. Of particular
relevance are the proposed provisions on CRMs i.e. that Member States should take
measures to achieve the best possible management of waste containing significant
amounts of CRMs, taking economic and technological feasibility and environmental
benefits into account, prevent products constituting the main sources of CRMs from
becoming waste and include in their waste management plans nationally appropriate
measures regarding collection and recovery of waste containing significant amounts of
CRMs. The present report should help Member States implement the proposed
provisions on CRMs.

19
Sverdrup and Koca, "A short description of the WORLD 6.0 model and an outline of elements of the standard parameterization",
2016
20
Directive 2008/98/EC of the European Parliament and of the Council on waste

11
2.2. Circular Economy Finance Support Platform
The European Fund for Strategic Investments (EFSI) is an initiative to help overcome the
current investment gap in the EU. Jointly launched by the European Investment Bank
(EIB) Group and the Commission, it aims to mobilise private investment in projects
which are strategically important for the EU.
Linked to EFSI, a platform to support the financing of circular economy was launched
together with the Commission's first report on the implementation of the Circular
Economy Action Plan21. The platform brings together the Commission, the EIB, financial
market participants and businesses to increase awareness of the circular economy
business logic and improve the uptake of circular economy projects by investors.
The platform has a three-pillar structure:
- The coordination and awareness raising pillar will share best practices amongst
potential project promoters and other stakeholders. It will analyse the characteristics
of circular economy projects and their particular financing needs, advice on
improving their bankability, as well as coordinate activities regarding financing of the
circular economy. In this context, a Support to Circular Economy Financing Expert
Group has been set-up. The first meeting of this expert group was held on 2 October
2017.
- The advisory pillar will be used to develop circular economy projects and to improve
their bankability prospects.
- The financing pillar will explore whether a dedicated financing instrument for
circular economy projects is needed.
2.3. Horizon 2020
Horizon 2020 has been instrumental in implementing the EU Raw Materials Initiative
and the European Innovation Partnership (EIP) on Raw Materials (See Section 3.1).
Particularly the Societal Challenge 5 on climate action, environment, resource efficiency
and raw materials (SC5) has helped to respond to the challenge of securing the
sustainable access to raw materials, particularly CRMs. Other major contributing parts of
Horizon 2020 include the SPIRE Public Private Partnership on energy efficient raw
materials production and the Nanotechnologies, Advanced Materials, Biotechnology and
Advanced Manufacturing and Processing work programmes.
More than €200 million has so far been invested in R&I actions under the SC5
developing and demonstrating sustainable production of primary and secondary raw
materials, including CRMs, in the EU. The Commission already funded at least 26
research projects and policy support actions related to CRMs (see further in Section 3).
All the actions should help to consolidate a growing raw materials R&I community in
Europe and outside. The started or planned large innovation actions are expected to
contribute to achieving the EIP target of launching at least ten innovative pilot plants for
the production of raw materials and finding at least three substitutes of CRMs. Raw
materials topics under the SC5 are successfully attracting industrial participation: 43% of
funding goes to private companies, compared to an average 28% in SC5 as a whole.
In the last period of 2018-2020, more than €250 million will be dedicated to the actions
on raw materials, including more than €100 million under a Circular Economy Focus
Area. The actions should contribute to improving access to CRMs and increased recovery

21
COM(2017) 33 final

12
rates in the EU, to reduced EU dependency on imports of CRMs and to strengthening the
expert community in the EU.
2.4. Best practices
 France: Le Comité pour les Métaux Stratégiques (COMES) seeks to strengthen the
security of supply of strategic metals. Its activities include work on specific
recycling targets for strategic metals as part of certain extended producer
responsibility (EPR) schemes.22 The French agency ADEME also commissioned and
published a study on research and development priorities for the recycling of critical
metals.23
 The Netherlands: A Government-wide Programme for a Circular Economy24
addresses critical mineral raw materials by promoting their substitution, efficient
use, re-use and recycling. The Ministry of Economic Affairs has also commissioned
the development of a “resource scanner”, a method and IT tool to map out business
risks.
 ERA-MIN 2: Through the Horizon 2020 programme, the Commission is co-funding
ERA-MIN 2 which is the largest network of R&I funding organisations in the
mineral resources field. It is a public-public partnership of 21 research funding
organisations from 11 Member States, two regions and five non-EU countries25. In
February 2017, a joint call, “Raw materials for the sustainable development and the
circular economy”, was published, including a topic on design of products: efficient
use or substitution of critical materials in products and components, product
durability, facilitation of recycling.26

2.5. Possible further actions


 The Commission could hold a workshop for Member States in 2018/2019 on
approaches to implement the proposed provisions on CRMs under the Waste
Framework Directive.
3. KEY ACTORS AND PROJECTS IN THE EU
3.1. The European Innovation Partnership on Raw Materials
The 2012 Communication proposing a European Innovation Partnership (EIP) on Raw
Materials27 asked EU and national industry, institutional stakeholders, academia, research
organisations and NGOs to come up with a plan to contribute to the mid- and long-term
security of the sustainable supply of raw materials in Europe. A strategic implementation
plan was adopted in 2013.
Two calls for commitments from external stakeholders to implement the plan were
launched in 2013 and 2015. As a result, there are currently some 105 ongoing recognised
‘raw materials commitments’.28 Several of these address CRMs and circular economy

22
http://www.mineralinfo.fr/page/comite-metaux-strategiques
23
http://www.ademe.fr/sites/default/files/assets/documents/competences-recyclage-metaux-201706-rapport.pdf
24
'A Circular Economy in the Netherlands by 2050', September 2016, https://www.government.nl/documents/policy-
notes/2016/09/14/a-circular-economy-in-the-netherlands-by-2050
25
Finland (Tekes), France (ANR and ADEME), Germany (Juelich/BMBF), Ireland (GSI), Italy (MIUR), Poland (NCBR), Portugal
(FCT), Romania (UEFISCDI), Slovenia (MIZS), Spain (CDTI and MINECO) and Sweden (Vinnova); Flanders (FWO and
Hermesfonds) and Castille y Léon (ADE); Turkey (TUBITAK), Argentina (MINCyT), Brazil (Finep), Chile (CONICYT) and
South Africa (DST).
26
https://www.era-min.eu/system/files/call_text_era-min_joint_call_2017_0.pdf
27
COM(2012) 82, 29.2.2012
28
See https://ec.europa.eu/growth/tools-databases/eip-raw-materials/en/call-commitments

13
aspects. Calls for commitments offer an opportunity for stakeholders to receive a
guarantee that their initiative is in line with the objectives of the EIP, get visibility and
identify potential synergies with other initiatives in this area. In 2017, the memberships
of the high-level steering group and the operational groups have been renewed.
3.2. The Ad hoc Working Group on Critical Raw Materials
The Ad hoc Working Group (AhWG) on Critical Raw Materials is a sub-group of the
Commission expert group called the Raw Materials Supply Group29. It is composed of
representatives from EU Member States, European Economic Area countries, candidate
countries and organisations representing industry, research and civil society stakeholders.
The AhWG assists the Commission in the regular updates of the list of the CRMs and
contributes with relevant expertise. It was also consulted on the outline of the present
report.
3.3. The European Institute of Innovation and Technology: Raw Materials
Knowledge and Innovation Community (EIT Raw Materials)
EIT RawMaterials, initiated by the EIT (European Institute of Innovation and
Technology) and co-funded under Horizon 2020, is the largest consortium in the raw
materials sector worldwide. It aims to boost competitiveness, growth and attractiveness
of the European raw materials sector via driving and fostering innovation and
empowering students, education partners and entrepreneurs toward the circular economy.
This will result in the introduction of innovative and sustainable products, processes and
services, as well as talented people that will deliver increased economic, environmental
and social sustainability to European society.
EIT RawMaterials unites more than 100 partners – academic and research institutions as
well as businesses – from more than 20 EU countries. They collaborate on finding new,
innovative solutions to secure the supplies and improve the value chain of raw materials,
including CRMs, from extraction to processing, manufacturing, reuse and recycling.
There are six regional hubs ("co-location centres) in Belgium, Finland, France, Italy,
Poland and Sweden that promote bridging between business, research and education.
3.4. SCRREEN: the European Expert Network on Critical Raw Materials
SCRREEN (Solutions for CRitical Raw materials - a European Expert Network)30 is a
new Coordination and Support Action funded under Horizon 2020. It aims at gathering
European initiatives, associations, clusters, and projects working on CRMs into a long-
lasting European expert network on CRMs with stakeholders, public authorities and civil
society representatives. This network builds on the previous experience of the ERECON
network (see below) and combines forces to address key CRM issues including circular
economy aspects in relation with policy/society, technology, standards and markets.
SCRREEN will contribute to the CRM strategy in Europe by (i) mapping primary and
secondary resources as well as substitutes of CRMs, (ii) estimating the expected demand
of various CRMs in the future and identifying major trends, (iii) providing policy and
technology recommendations for actions improving the production and the potential
substitution of CRMs, (iv) addressing specifically waste electrical and electronic
equipment (WEEE) and other relevant end-of-life products with regard to CRM contents
and treatment standards and (vi) identifying the knowledge gained over the last years and
easing the access to these data beyond the project. The knowledge gathered within the

29
http://ec.europa.eu/transparency/regexpert/index.cfm?do=groupDetail.groupDetail&groupID=1353
30
http://scrreen.eu

14
project will be maintained in the EU Raw Materials Information System (see Section
4.1.1).
3.5. ERECON: The European Rare Earths Competency Network (2013-2015)
The former European Rare Earths Competency Network (ERECON)31 brought together
experts from industry, academia and policy-making to specifically look at ways to
improve the security of Europe’s rare earth supply. Three Working Groups of ERECON
were focused on primary supply of rare earths in Europe; European rare earths resource
efficiency and recycling; and European end-user industries and rare earths supply trends
and challenges. Key findings of the network were compiled into a final report32.
3.6. Other Horizon 2020 and LIFE projects
Together with the SCRREEN coordination and support action a number of Horizon 2020
research and innovation actions are currently investigating the potential substitution of
CRMs. INREP33 and INFINITY34 are working towards indium-free transparent
conducting oxides. Flintstone202035 deals with the next generation of superhard non-
CRM materials and solutions in tooling substituting tungsten and cobalt.
In the area of industrial symbiosis, SCALE36 aims to develop a European supply chain
for scandium through the development of technological innovations which will allow the
extraction of scandium from bauxite residues, the CHROMIC37 project aims to develop
a new recovery process for critical by-product metals (niobium and vanadium) from
complex and low-grade secondary industrial waste, CABRISS38 aims at the recovery and
preparation for reuse of key photovoltaic raw materials including silicon and indium, to
be used for the manufacturing of photovoltaic cells and panels or as feedstock for other
industries and REslag39 is addressing, among other things, CRMs to be extracted from
steel slag.
The LIFE Programme (2014-2020) also contributes to sustainable use, recovery and
recycling of raw materials. It is currently funding a cluster of projects dealing with CRMs
such as indium, platinum group metals and magnesium. Examples of such projects are
the CRM Recovery40 that is demonstrating viable approaches to increase the recovery of
target CRMs found in waste electrical and electronic equipment through trials in Italy,
Germany, the UK and the Czech Republic and the RECUMETAL project41 that is
demonstrating the recycling of flat panel displays to recover plastics, indium and yttrium
and their reuse in new applications.

31
https://ec.europa.eu/growth/sectors/raw-materials/specific-interest/erecon_en
"Strengthening of the European Rare Earths Supply Chain - Challenges and policy options",
http://ec.europa.eu/DocsRoom/documents/10882/attachments/1/translations
33
http://www.inrep.eu
34
https://infinity-h2020.eu
35
http://flintstone2020.eu
36
http://scale-project.eu/
37
http://www.chromic.eu/
38
https://www.spire2030.eu/cabriss
39
http://www.reslag.eu
40
http://www.criticalrawmaterialrecovery.eu/
41
https://life-recumetal.eu/en/

15

You might also like