Scribd
Upload
147 views2 pages

Design Criteria/Design Check For Star Deck Sheet (44/130)

The document provides design criteria and calculations for a star deck sheet. [1] Strength calculations are shown to check that the permissible stress of 150 N/mm^2 is not exceeded for a span of 1.7m and loading of 450 kg/m^2. [2] Deflection calculations are also provided to check that the actual deflection of 4.4mm is less than the permissible deflection of 6.8mm according to the specified manual for allowable deflection limits, Steel Designer's Manual. [3] Loading and strength calculations are also summarized for a single span of 600mm under a roof drain.

Uploaded by

Advanced Structural Engineering
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
147 views2 pages

Design Criteria/Design Check For Star Deck Sheet (44/130)

The document provides design criteria and calculations for a star deck sheet. [1] Strength calculations are shown to check that the permissible stress of 150 N/mm^2 is not exceeded for a span of 1.7m and loading of 450 kg/m^2. [2] Deflection calculations are also provided to check that the actual deflection of 4.4mm is less than the permissible deflection of 6.8mm according to the specified manual for allowable deflection limits, Steel Designer's Manual. [3] Loading and strength calculations are also summarized for a single span of 600mm under a roof drain.

Uploaded by

Advanced Structural Engineering
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

DESIGN CRITERIA/DESIGN CHECK FOR STAR DECK SHEET (44/130)

Calculation of Multi Span :-

Strength calculation –

W = 450 Kg/m² as per Clause No. 12.02.04 of Specification


Span = 1.7 m

M = wl² = 450x1.7² = 130.05 Kg – m = 130.05x104N-mm


10 10

Z = 14.49 cm³ = 14490mm³

M = f x Z, f=M = 130.05x104 = 89.75 N/ mm²


Z 14490
< 150 N/mm² (0.6 fy)
Permissible stress= 0.6 fy = 0.6 X 250 = 150 N/mm² (As per, IS: 801-1975)

Effective with calculation as per IS:801-1975

For Top flat element of 25 mm(Assuming f = 1000 Kg/cm²)

W (lim) = 1435 = 1435 = 45.4


DESIGN CRITERIA/DESIGN CHECK FOR STAR DECK SHEET (44/130)

Deflection calculation –
SPECIFY THE MANUAL
3 x W x L³ FOR THE ABOVE
d (max .) = 384 x E x I (Refer Steel designer Manual) CHOSEN CRITERIA FOR
ALLOWABLE
DEFLECTION.
Where.
W(Load) = w x L = 450x1.7 = 765 Kg
L(Length) = 1700 mm
E (Modulus of elasticity) = 2.05x105 N/mm²
I (Moment of inertia) = 32.46x105mm4

____3 x 7650 x (1700)³___


d (max .) = 384 x 2.05x 105 x32.46x104 = 4.4 mm

Permissible Deflection d(per.) = ½50

d (per .) = 1700 = 6.8 mm


250

= 4.4 < 6.8mm

Actual deflection < Permissible deflection, Hence it safe as per specification.

Single Span (Metal Deck under Roof drain) :-

Span = 600mm

Loading = 0.4x1.0x1.0(For water)+0.15x1.0x2.5(For slab)


= 0.4+0.375=0.775t/m

0.775x 10³x10 = 7.75 N / mm


10

You might also like