Scribd
Upload
195 views8 pages

AVR DBC1 DC Generator Manual

This document provides information about the DBC1 AVR voltage regulator for brush and brushless DC generators, including: - It regulates generator output voltage by controlling field current and has DC sensing. - It controls and keeps the DC voltage constant, and includes a frequency control that deactivates the generator below a preset speed threshold. - It has electrical protections, voltage/current trimmers, and jumpers to select voltage range and 50/60Hz frequency. - Trimmers adjust voltage, current limit, and under-frequency protection threshold. An external potentiometer can adjust voltage or current remotely. - It provides connections for power input/output, voltage/current sensing,

Uploaded by

Eng M Elseaidy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
195 views8 pages

AVR DBC1 DC Generator Manual

This document provides information about the DBC1 AVR voltage regulator for brush and brushless DC generators, including: - It regulates generator output voltage by controlling field current and has DC sensing. - It controls and keeps the DC voltage constant, and includes a frequency control that deactivates the generator below a preset speed threshold. - It has electrical protections, voltage/current trimmers, and jumpers to select voltage range and 50/60Hz frequency. - Trimmers adjust voltage, current limit, and under-frequency protection threshold. An external potentiometer can adjust voltage or current remotely. - It provides connections for power input/output, voltage/current sensing,

Uploaded by

Eng M Elseaidy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

DBC1 AVR

Use and Maintenance Manual

06/13
rev.00
ENGLISH

1. INTRODUCTION

2. DESCRIPTION

3. ELECTRICAL CHARACTERISTICS AND BASIC PERFORMANCE

4. CONFIGURATION JUMPERS

5. REGULATION OF VOLTAGE, CURRENT, STABILITY, UNDER FREQUENCY

6. CONNECTIONS

7. WIRING DIAGRAM

2 - DBC1 AVR
ENGLISH

1. INTRODUCTION
The DBC1 is a digital voltage regulator designed for brush and brushless DC generators.
It regulates the output voltage of a generator by controlling the field current.
The modular architecture enables optimisation for different applications.
It has DC sensing.

2. DESCRIPTION
The voltage regulator controls and keeps constant the average value of the DC voltage.
A frequency control progressively deactivates the machine when the drive motor speed drops below a
pre-set adjustable threshold preventing over-excitement at low operating speeds.

3. ELECTRICAL CHARACTERISTICS AND BASIC PERFORMANCE

The electronic is sealed with resin (it is a perfect protection against vibration and dropping).
The regulator includes:

- A terminal strip (10 terminals)


- A voltage trimmer
- A current trimmer
- A stability trimmer
- An under frequency trimmer
- A range sensing selection jumper
- A frequency selection jumper
- Electric protection with fuse

DBC1 AVR - 3
ENGLISH

4. CONFIGURATION JUMPERS

The regulator has two groups of jumpers.

The first group of jumpers selects the nominal voltage of sensing.


- 12 Vdc;
- 24 Vdc;
- 48 Vdc;
- 72 Vdc.

Example of jumper position

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
12 V 24 V 48 V 72 V 12 V 24 V 48 V 72 V 12 V 24 V 48 V 72 V 12 V 24 V 48 V 72 V

The second group of jumper, which is identified by letter Hz, refers to the operation of the alternator
at 50 or 60 Hz (fig.1/fig.2).

▪ 50 Hz ▪
▪ ▪
▪ ▪ 60 Hz
Fig 1 Fig 2

4 - DBC1 AVR
ENGLISH

5. REGULATION OF VOLTAGE, CURRENT, STABILITY, UNDER FREQUENCY

VOLTAGE ADJUSTMENT

Adjusting the trimmer “V” changes the output voltage. Take the generating set to its nominal speed
and turn clockwise if you want to increase the voltage and anticlockwise to decrese the voltage.
If a small variation in speed causes a voltage variation, then the underspeed protection trimmer “UF”
should first be calibrated.

CURRENT ADJUSTMENT

Adjusting the trimmer “I” changes the output current.


If you want to increase the limit of current output turn clockwise trimmer and anticlockwise to decrese
the current limit.

UNDER FREQUENCY ADJUSTMENT

Set the frequency selection jumper at 50 (60)Hz.


Start up rotation of the generating set adjusting it to obtain a frequency of 46 (56)Hz. Turn trimmer
“UF” until the voltage begins to drop. Restore nominal speed.

Caution: if the UF protection is adjusted at too low values the generator may be damaged. On the
other hand, too high adjustments can cause voltage drops with high loads.

The adjustment range is:


- jumper on 50 Hz position, range 42÷50 Hz, the central position of trimmer corresponds to 46
Hz;
- jumper on 60 Hz position, range 52÷60 Hz, the central position of trimmer corresponds to 56
Hz.

STABILITY ADJUSTMENT

If there are voltage fluctuations, adjust the potentiometer “ST”, which modulates the reaction time of
the regulator to external inputs, thereby eliminating any instability in the alternator-load system.

CONNECTING AN EXTERNAL POTENTIOMETER (5 kOhm)

Remote voltages adjustment : connect the external potentiometer (5kOhm, ½W) to the free terminal
“POT V” and to "Com.Ta".

Remote current adjustment : connect the external potentiometer (5kOhm, ½W) to the free terminal
“POT I” and to "Com.Ta".

DBC1 AVR - 5
ENGLISH

6. CONNECTIONS

Following fast-on connections are available on the AVR:

· Power input, terminals AuxL, AuxN.


· Power output, terminals –Ex, +Ex.
· Voltage sensing, terminals – Batt., +Batt.
· Current sensing, terminals Com\TA (black), TA (red).
· External potentiometer for adjustment output voltage , terminals Pot V, Com.Ta.
· External potentiometer for adjustment current limitation, terminals Pot I, Com.Ta.

6 - DBC1 AVR
ENGLISH

7. WIRING DIAGRAM

DBC1 AVR - 7
N. 226845
SOGA SpA

Phone +39 0445 450500 • Fax +39 0445 446222


Via Tezze, 3 - 36073 Cereda di Cornedo Vicentino - VI - Italy

www.sogaenergyteam.com - [email protected]

Soga SpA si riserva il diritto di modificare i dati per aggiornare o migliorare i propri prodotti senza alcun preavviso
Soga SpA reserves the right to change the data in order to update or improve its products without prior notice

You might also like