Scribd
Upload
69 views7 pages

Breadboards

Breadboards allow electronics components to be quickly and easily connected to test circuits. They consist of rows and columns of holes connected internally by metal clips. Components can be inserted into the holes to build circuits, with columns and rows connected to each other but not between adjacent columns or rows. This makes breadboards useful for prototyping circuits before building a permanent version on a circuit board.

Uploaded by

Noor Saba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views7 pages

Breadboards

Breadboards allow electronics components to be quickly and easily connected to test circuits. They consist of rows and columns of holes connected internally by metal clips. Components can be inserted into the holes to build circuits, with columns and rows connected to each other but not between adjacent columns or rows. This makes breadboards useful for prototyping circuits before building a permanent version on a circuit board.

Uploaded by

Noor Saba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Breadboards

Workshop#08
Introduction
 Prototype Board or a Solderless Veroboard is a board for
making and testing temporary electronic circuits
 The board consists of several holes (also called sockets)
arranged in rows and columns
Introduction
 Breadboards are a simple and
useful way to quickly assemble and
play around with different circuits.
 Building circuits with a breadboard
is as simple as sticking wires and
components into the holes. The
holes themselves are connected
according to the diagram at left
 Each column has 5 holes which are
connected to each other .
 No connection between adjacent
columns.
 In the same way, two rows have
connections, but no two rows are
connected with each other.
Breadboard

Figure 9.2: Breadboard connections


Inside Breadboard
 The connections between
holes are accomplished
through metal clips.

 metal clips run through Figure: Breadboard metal clip


the breadboard
underneath the hole
mouths to connect each
of the holes.

Figure :Inner view of a Breadboard


Building simple circuits on breadboard
Veroboard
 A Veroboard is expertly constructed using strips of
copper clad on a top quality board featuring a grid
pattern of holes spaced 0.1" (or 2.54mm) apart.
 design allows you to solder almost any non-surface
mount ICs, resistors, capacitors onto the Veroboard.

You might also like