Scribd Logo
Upload

Welcome to Scribd!

  • 122 views

    Weedo F192 RJ45 Operation Introduction PDF

    Uploaded by

    Facu Benitez
    1. Connect the Weedo F192 printer to a router using a USB cable, WiFi cable, and Ethernet cable. 2. Access the printer's control panel by opening a web browser and entering the IP address 192.168.0.101:8090. 3. Upload GCODE files, slice STL files, and print designs from the browser-based interface using the default username and password.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Weedo F192 RJ45 Operation Introduction PDF

    Uploaded by

    Facu Benitez
    122 views7 pages
    1. Connect the Weedo F192 printer to a router using a USB cable, WiFi cable, and Ethernet cable. 2. Access the printer's control panel by opening a web browser and entering the IP address 192.168.0.101:8090. 3. Upload GCODE files, slice STL files, and print designs from the browser-based interface using the default username and password.

    Original Title

    Weedo-F192-RJ45-Operation-Introduction.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. Connect the Weedo F192 printer to a router using a USB cable, WiFi cable, and Ethernet cable. 2. Access the printer's control panel by opening a web browser and entering the IP address 192.168.0.101:8090. 3. Upload GCODE files, slice STL files, and print designs from the browser-based interface using the default username and password.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    122 views7 pages

    Weedo F192 RJ45 Operation Introduction PDF

    Uploaded by

    Facu Benitez
    1. Connect the Weedo F192 printer to a router using a USB cable, WiFi cable, and Ethernet cable. 2. Access the printer's control panel by opening a web browser and entering the IP address 192.168.0.101:8090. 3. Upload GCODE files, slice STL files, and print designs from the browser-based interface using the default username and password.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    WEEDO F192 RJ45 Module Configuration

    1. Use USB cable and Wifi cable to connect Weedo F192 to router (LINE 3) as Pic_1.

    Pic_1
    2. If your PC support WIFI function, please connect PC to the router through WIFI.

    3. If your PC does not support WIFI then you can connect to the router by using Ethernet cable.

    4. After all connection is done, you can power on the printer and wait for about 20 seconds for
    the module initialization.

    5. Please open the Firefox/Chrome browser and input the IP address 192.168.0.101:8090 like the
    Pic_3 show below.

    Pic_3

    6. When you first log in, the menu looks like the Pic_4 show below. In this mode, you have no
    rights to operation the printer as anonymous, you only can watch the status and camera and
    download the files in the module.

    Pic_4

    7. If you want to operate the printer like Pic_5 show. The Username is “user”, the password is
    “user”. When you input the correct name and password, the Pic_6 will show. The whole browser
    looks like Pic_7
    Pic_5 Pic_6

    Pic_7

    8. Connect the serial port to the mainboard by press the Connect button, the menu is shown as
    Pic_8.
    Pic_8
    9. Select the Xiao_Fei_Long_1103.gco file by press the file. It will looks like Pic_9 below
    Pic_9
    10. Press the Print button, then it will print the selected file as shown as Pic_10

    Pic_10
    11. By the way, you can also upload your G code file to the printer by using upload function like
    Pic_11 Pic_12.

    Pic_11 Pic_12
    Notice:
    A. The upload file format must be .gcode or .stl
    B. If you upload .stl format file, you need to change the .stl to .gcode by clicking the red area like
    Pic_13 show below.

    Pic_13
    After that the module will slice the .stl into .gco, you only need to wait for several seconds. It
    looks like Pic_14.You only need to make sure the output file name show in red area.

    Pic_14
    After click the Slice button, it will be shown like Pic_15 while slicing the file, you need to wait for
    the slicing complete. The final Menu looks like Pic_16.

    Pic 15 Pic_16

    Wish you can connect the rj45 well. If need any support or any other
    questions,please contact us anytime.Thanks!

    You might also like