RLDED6504A

65
 4.3.Customizing theTIME Settings 20
4.4.Customizing the SETUP Settings 21
4.5.Customizing the LOCK Settings 24
TV Base Stand assemble 4.6.Customizing the CHANNEL Settings 27

PC Mode 30

31

33

Initial Setup
3.1. Initial Installation 17
3.2. Audio/Video Source Selection 17
3.3. DTV Mode Operations 17

SETTINGS 18
4.1.Customizing the PICTURE Settings 18
4.2.Customizing the SOUND Settings 19
 TV Base Stand assemble

Short Short

R L
Long Long

Panel side

Screws(3) Screws(3)
4*18BMH 4*18BMH

3.Mounting on the wall

This unit is VESA-complian,and is designed to be wall-mounted
with a VESA-compliant 7.87"x7.87"(200mmx200mm)mounting kit
designde for flat-panel TVs(not supplied).Mount this unit according
to the instructions included in the monting kit. Length of screw should
not exceed 11mm
NOTE
Remove the base stand before mounting the unit on the wall.

15.75”

15.75”

Four mounting holes

(size M6 screw)
 0.5A
USB
5V
COAXIAL
Pr
Pb
VIDEO/Y
L
AUDIO
R
Headphone HDMI1 HDMI2 HDMI3 VGA PC AUDIO RF

1. USB (For Service)

HDMI \ HDMI2 \ HDMI3

 24.
25.

1 2
1. 3 4
2. sound from speakers 5 P.MODE S.MODE ASPECT SLEEP 6

3.
4. ASPECT: Selects the screen size
7
5.
6.
7. 8 9
10
8. 11 EPG FREEZE CH.LIST 12
13 14
9.
15 TV PC HDMI AV 16

17 18
10. INFO SOURCE

11.
19 OK

12.
20 MENU EXIT
21
13. PC: Press to switch to VGA signal source 22
MTS
V CH
23 24
14. HDMI: Press to switch to HDMI signal V CH
CC

26 25
15. TV: Press to switch to TV signal source 27 FAV FAV- FAV+ 28

16. AV: Press to switch to AV signal source

17.

18.
19.

20. Universal Remote Code:20DF

(Universal Rmote Control is not included)
21.
22.
23.
adaptor

R AUDIO L VIDEO/Y Pb Pr COAXIAL USB

5V 0.5A

R AUDIO L VIDEO/Y Pb Pr COAXIAL USB

5V 0.5A
RF
PC AUDIO
VGA
HDMI3
HDMI2
HDMI1
hone
 RF
R AUDIO L VIDEO/Y Pb Pr COAXIAL USB

PC AUDIO
5V 0.5A

VGA
Note:Coaxial output

HDMI3
HDMI2
HDMI1
Headphone
Headphone HDMI1 HDMI2 HDMI3 VGA PC AUDIO RF

Headphone HDMI1 HDMI2 HDMI3 VGA PC AUDIO RF

 4.1. Customizing the PICTURE
3. Initial Setup
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the ◄/►
to select the PICTURE.
3.1. Initial Installation 3. Use the ▲/▼ bu ons to highlight an individual PICTURE , use the ◄/► to
change the se and press the MENU to exit the menu.

The first time the unit is turned on or anytime the system is restored to
the defaulted settings, the Initial Installation wizard will be displayed on the
screen.
Conect the antenna cable to the RF connector at the connections panel
and follow the steps displayed on the screen to set up the system basic
settings (Language, Cable, etc.) and start an auto search of TV channels.

3.2. Audio/Video Source Selection

Source Select
Turn on the TV by pressing the POWER button on TV TV
AV
or on the remote control, press SOURCE and use the YPbPr
direction buttons / to select the desired source HDMI1 The PICTURE menu includes the following :
HDMI2
depending on the equipment you have connected (AV, HDMI3 Picture Mode Cycle among picture display modes: Standard, Dynamic,
PC
HDMI, PC ) or choose TV to enter these mode.
Brightness Control the overall brightness of the picture.

3.3. DTV Mode Operations Contrast

Control the difference between the brightness and darkest regions of the
picture.

Use CH+ or CH- buttons to tune the desired channel, or enter the channel Color Control the color.
number directly using the numeric keypad. Press OK to display on screen the
list of TV (press the / buttons to sort by group and show only the DTV, Tint Controls the nt.
the analog TV channels, etc.). Increase this se ng to see crisp edges in the picture; decrease it for so
Sharpness
edges.
Use MTS button to select the audio language broadcasting, CC button to
Color Temp. Cycles among color modes: Normal, Warm, Cool.
show or hide subtitles on screen and FAV button to see a list of your favorite
Advanced 1)ASPECT RATIO This feature changes the various aspects of the TV’s video.
channels.
(Aspects include wide, zoom, cinema, normal).

4. SETTINGS contrast of the TV depending on the picture you are viewing.

17 18
4.2. Customizing the SOUND 4.3. Customizing the TIME Se ngs
Select TV source for example. (Press SOURCE bu on to select TV mode) Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on. 1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the ◄/► 2. Press the MENU bu on on the remote control to display the Main menu, and use the ◄/►
to select the SOUND. bu ons to select the TIME.
3. Use the ▲/▼ bu ons to highlight an individual SOUND , use the ◄/► to 3. Use the ▲/▼ bu ons to highlight an individual TIME , use the ◄/► to
change the se and press the MENU to exit the menu. change the se and press the MENU to exit.

The SOUND menu includes the following op ons: The TIME menu includes the following op ons:

Allow you to select among: Standard, Music, Movie, Sports and User.
Allow you to set up the sleep among: 5min, 10min, 15min,
Sleep Timer
MTS This feature adjusts the second audio programming in analog channels. 30min, 60min, 90min, 120min, 180min, 240min and off.
Allow you to set up the sleep among: Pacific, Alaska, Hawaii,
Time Zone
Audio Language Allow you to select audio language among: English, French and Spanish. East Central and Mountain.

Digital Audio Allow you to select between PCM, RAW and OFF. Daylight Saving Time Allow you to turn on or off the daylight saving
Output
Time Format
Surround Allow you to select between Off and On. Auto Clock

AVL CABLE or SATELLITE of anything else please use make sure AUTO CLOCK
from overly loud commercials. is turned off.
Clock

Please Note:

a power source. If the TV is unplugged or the power strip is turned off.

19 20
4.4. Customizing the SETUP Se ngs
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the ◄/►
bu ons to select the SETUP.
3. Use the ▲/▼ bu ons to highlight an individual SETUP , use the ◄/► to
change the se and press the MENU to exit.

Exit

H-Posi on Allow you to use the ◄/► bu ons to adjust the H Posi on.
V-Posi on Allow you to use the ◄/► bu ons to adjust the V Posi on.
Clock Allow you to prolong the image.
Phase Allow you to adjust the de
Auto Select “Auto” and press the ► bu on, the unit will
automa adjust all items to achieve a best effect.
Use the ▼ bu on to highlight the Close n item, then press the ►
Close Cap on
bu on to enter into the following menu.
The SETUP menu includes the following op ons:

Menu Language Allow you to select menu language among: English, Français and Español.

Transparent
images to show through.

OSD Timeout

Input Label

Input PC signal first, then press SOURCE bu on to select PC mode, press ►

Exit
bu on to confirm.

CC Mode Allow you to select the CC Mode among: Off, On and CC

on Mute.
Analog CC Allow you to select the basic sel on among: CC1, CC2,
CC3, CC4, Text1, Text2, Text3 and Text4.
Digital CC Allow you to select the advanced sel on among:
Service1, Service2, Service3, Service4, Service 5 and
Service6.
Op Use the ▼ bu on to highlight the “Op on” item, then
press the ► bu on to enter into the following menu.

21 22
 4.5. Customizing the LOCK Se ngs

Select TV source for example. (Press SOURCE bu on to select TV mode)

1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the ◄/►
bu ons to select the LOCK.
3. Use the ▼ bu on to highlight “Enter Password” item, use the numeric keys to input 4-digital
password. A er you that, the screen will display the junior menu. A er ngs, press menu
to exit.
NOTE: The factory password is 0000. The supervision password is 8899.
Exit

Use the ▲/▼ bu ons to highlight the desired item, and

Input
use the ◄/► bu ons to select.
4-digital password
Please Note:
Closed captioning is only available under AV and TV ports.
Closed captioning depends on your TV program’s support. Sometimes due to the
TV channel or the signal, Closed captioning will not be available.

The LOCK menu includes the following op ons:

Restore Default Restore all se ngs in SETUP menu to factory se ngs.

Use the ▼ bu on to select the “Change Password” item, then press the
Change Password
► bu on to enter into the following menu.

Exit
Exit

Setup Wizard
Input the new 4-digital password and input it again to confirm.
Allow you to turn on or off the system lock.
System Lock If you turn off the system lock, then the following items (US, Canada, RRT
Se ng and Reset RRT) will unable to use.

23 24
 Use the ▼ ►
U
enter into the following menu.
Use the ▼ ►
Canada

Exit

TV Use the ▼ bu on to highlight the “TV” item, then press

► bu on to enter into the following menu.

Canada English Use the ◄/► bu ons to select among: OFF, C, C8+, G,
PG, 14+ and 18+.
Canada French Use the ◄/► bu ons to select among: OFF, G, 8ans+,
13ans+, 16ans+ and 18ans+.

RRT Se ng This feature is a downloadable rating filter based on TV broadcasts.

With the transition of TV broadcasts to digital, future changes, and
Exit
enhancements in how TV shows are rated for content are possible.

Use the ▲/▼ bu ons to select the desired ra ng and

Reset RRT Allow you to reset the RRT se ng.
press the ► bu on to block or unblock ra ng.
MPAA The Movie ra ng (MPAA) is used for original movies rated
by the Mo Picture Associa on (MPAA) as broadcasted
on cable TV and not edited for television.
Use the ▲/▼ bu ons to select N/A, G, PG, PG-13, R,
NC-17 or X.
RATING DESCRIPTION
General Audiences. Movie is appropriate for
G
all ages.
Parental Guidance Suggested. May contain
PG
material not suited for younger viewers
Contains content that may not be
PG-13
appropriate for viewers under the age of 13.
Restricted. Contains adult content, no one
R
under 17 admi d without parent.
NC-17 No one 17 and under admi
X Adults only.

2
25 2
26
4.6. Customizing the CHANNEL Se ngs

Select TV source for example. (Press SOUCE bu on to select TV mode)

1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the ◄/►
bu ons to select the CHANNEL.
3. Use the ▲/▼ bu ons to highlight an individual CHANNEL , use the ◄/► to
change the se and press the MENU to exit.

Exit

The receivable channels will be stored automa cally.

When searching channels, press MENU to stop.
Use the ▼ bu on to highlight the “Auto Scan”, then press the ►
bu on to search the channels automa cally.
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
Allow you t add these channels which you desired as the favorite
Favorite channels. Use the ▲/▼ bu ons to highlight the “Favorite” item, then
The CHANNEL menu includes the following : press the ► bu on to enter into the following menu.

Allows you to select antenna between Air and Cable.

Air/Cable If you select “Cable”, the following items (Favorite, Channel List, Show/
Hide, Channel NO. and Channel Lable) are unable to use.
Use the▼ button to highlight the ”Auto Scan” item,then press ►
Auto Scan button to enter into the following menu.

Exit

Use the ▲/▼ bu ons to highlight the desired item, then press OK
bu on to add or remove the highlighted channel as favorite.
Channel list This feature shows the list of stored channels.

Allow you to show or hide the channels.

Show/Hide Use the ▲/▼ bu ons to highlight the “Show/Hide” item, then press the
► bu on to enter into the following menu.

If you select “Air” as input signal in Antenna item, you can press the ►
bu on to search the channels automa cally.

27 28
 5. PC Mode
Se ng up your PC so ware (based on Windows XP)

The Windows display-se ngs for a typical computer are shown below. But the actual screen on
your PC will probably be different, depending upon your par cular version of Windows and your
par cular video card. But even if your actual screen looks different, the same, basic set-up
informa on will apply in almost all cases.

Exit

Use the ▲/▼ bu ons to highlight the desired item, then press OK
bu on to show or hide the highlighted channel.

Channel No. Display the number of current channel.

Channel Label Display the lable of current channel.

1. First, click on “Control Panel” on the Windows start menu.

2. When the control panel window appears, click on “Appearance and Themes” and a display
dialog-box will appear.
3. When the control panel window appears, click on “Display” and a display dialog-box will
appear.
4. Navigate to the “Se ng” tab on the display dialog-box. The correct size se ng (res
Op 1360×768.
If a ver cal-frequency on exists on your display se ngs dialog box, the correct value is “60Hz”.
Otherwise, just click “Enter” and exit the dialog box.

Horizontal
Res n Standard Mode
Frequency (KHz) Frequency (Hz)
720x400 31.47 70 DOS
640x480 37.9 60 VGA
800x600 37.9 60 SVGA
1024x768 48.4 60 XVGA
1366x768 64 60 SXVGA
1920x1080 64 60 SXVGA

29
6

TV

TV

TV
7

RLDED6504A

1920x1080
350
5000:1
6ms
220W
AC 100-120V~ 60Hz

HDMIx3

Audio output

USB(For service)
and