0% found this document useful (0 votes)
2K views

Icom Programming Guide

CS-F100 follow through programming guide

Uploaded by

Mike
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
2K views

Icom Programming Guide

CS-F100 follow through programming guide

Uploaded by

Mike
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CS-F100_1.qxd 05.7.

29 10:17 Page 1

■ Getting started
INSTRUCTIONS
D This cloning software is designed to perform data
CLONING SOFTWARE setting and cloning for the IC-F110/F111/F121

CS-F100 /F210/F211/F221 VHF/UHF FM TRANSCEIVERS.


D HELP WINDOW: Each item has a help window to
describe functions and operation.

■ System requirements ■ Software installation


To use this program, the following hardware and software are D Installation
required: q Boot up Windows.
• Microsoft® Windows® 95/98/Me • Quit all applications when Windows is running.
• RS-232C serial port w Insert the disk into the appropriate CD drive.
• At least 640 × 480 pixel display e Select ‘Run’ from the [Start] menu.
• OPC-1122 CLONING CABLE (Cable adapter + DB9 Female r Type the setup program name with full path name, then
/DB25 Male serial cable) press the [Enter] key. (e.g. D:\csf100\setup [Enter])
t Follow the prompts.
NOTE: Depending on your Windows system files, the PC y Enter the product ID number in the following manner.
may require rebooting. In this case, repeat the installation • ID number: 263701 - (6 digit Serial number)
from the beginning. • e.g. the Serial number on the CD is 000001, enter “263701-
000001” as the ID number.
u Program group ‘CS-F100’ appears in the ‘Programs’ folder
of the start menu.

■ Connections Personal
to an RS-232C port
computer
All cloning operations are performed
from the computer’s keyboard—the
operation required on the transceiver
side is: to the MIC
Pushing and holding the power connector
switch to turn power ON.

OPC-1122

■ Screen description
q w e r t y u

NOTE: ‘Check the following’ dialog box appears when


the RS-232C serial port is not set correctly.

r CLONING MENU [Clone]


Click to display cloning menu and cloning information dia-
log box.
t MODEL MENU [Model]
Click to select LMR (2Tone/DTMF) or PMR (5Tone/DTMF).
y HELP MENU [Help]
i o
Click to display help contents and cloning software revi-
q FILE MENU [File] sion information.
Used for saving memory channel contents, printing the u TOOL BAR
pre-programmed information or exiting the program, etc. Short cut keys appear on the tool bar when clicking the
w VIEW MENU [View] tool bar function in the [View] menu.
• Displayed Font Size is selectable. i TREE VIEW MENU
• Turn the toolbar indication ON or OFF. Select the item that you want to edit.
e COM PORT MENU [COM Port] o PROGRAM SCREEN
Click to display the COM port setting dialog box. Displays the channel or editable item information.
• Set the COM port (RS-232C port) number properly.
• Set the transfer speed (Normal or High).
CS-F100_1.qxd 05.7.29 10:17 Page 2

■ Before starting the programming ■ 5Tone (for PMR only)


Read all the transceiver cloning data into the PC be- ï RX Code CH
fore starting editing with this software. Otherwise the Set items such as RX Code, Text, ID Dec, Bell, Emer
frequency data may not be cloned properly to your Cancel, ABC, EXO, Beep.
transceiver. ï RX Code Setting
• Select the optional signaling unit type, if required. Se- Set items such as Link A Timer, Compare Digit, ID De-
lect the bank type when you select SmarTrunk. code Timer, EXO Timer.
- 16 Bank are available for 256 CH.
ï TX Code CH
• Select the model type.
- LMR : Land Mobile Radio. 2Tone function available. Set TX Code, Input Digit, Text, Update, ABC Dec/Aud
- PMR: Private Mobile Radio. 5Tone function avail- and Sel items.
able. ï TX Code Setting
Set items such as Long Tone Timer, Link R/1/2 Timer,
■ Memory CH Lead out Delay Timer, ABC Decode Timer.
The ‘Memory CH’ window allows you to edit the chan- ï Format
nel information.
Set Tone Period, Notone Timer and Tone Length
ï Bank Operation/Bank items.
q Click the desired cell, then right click to display the ï User Tone
[Edit] menu and then click [Edit...Enter], or double- Set Encode and Decode Low/High items.
click the desired cell or data area in the memory
channel list directory. ■ Common
w Editable items; Text, SmarTrunk, Capa, Atr, Inh, ï Key & Display Assign
RX/TX Frequency, TX Inh, W/N, RX/TX C.Tone,
Text, Compander, TOT, RF Pwr, Lockout, Scan, etc. Set Up/Down/P0/1/2/3 key condition, Moni, Scan and
Prio A for the programmable key assign. Set Opening
NOTE: Program the RX frequency first, otherwise Text, RF Power Selection, MR/Code Display and
no setting can be done. SmarTrunk Key for the display assign.
ï Set Mode
■ DTMF Autodial Set Backlight, Beep, SQL Level and AF Min Level con-
ï DTMF Autodial/ Setting ditions.
Edit the DTMF Autodial Code, Emergency Code ï Common
(LMR), Log/ID Code (LMR), and then set the DTMF Commonly set items such as Clone Comment 1/2,
Timer, First Timer and M # Timer. User Password, PWR ON Password, Transceiver
Data Out, Timer A/B, Inactive Timer.
■ Continuous Tone ï Expert
Edit the specified receive and transmit frequencies re- Expertly set items such as Fast/Slow Scan Timer,
spectively. TX/RX DTCS Inverse, User CTCSS Freq(Hz), Emer
SW ON/OFF Timer, Emer Start/Repeat.
■ Scan List ï Character Editor
ï Scan List You can make your original characters and indicate
Set the Scan Mode condition, Text which appears dur- them on the LCD (Max. 16 characters).
ing scan and Text ON or OFF.
ï Scan Setting
Set Stop Timer, Resume Timer, Power ON Scan and
Auto CH Call (PMR).

■ 2Tone (for LMR only)


ï Code CH
Set Freq. 1st/2nd, Tone Period 1st/2nd, Text, Code NOTE: The above instructions are for reference only.
Type, Group Call, Bell, ANS, EXO, Beep, Auto TX, Please refer to the HELP file of the cloning software
Stun and Scan items. for the function or setting details.
ï RX Code Setting Microsoft and Windows are registered trademarks of Microsoft Corporation in
Set Notone Timer, Group Timer, EXO Timer, Beep Re- the U.S.A. and other countries.
Icom, Icom Inc. and the logo are registered trademarks of Icom Incor-
peat Timer and Auto TX Timer items. porated (Japan) in the United States, the United Kingdom, Germany, France,
Spain, Russia and/or other countries.

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A-6236W-1EX-q Printed in Japan


© 2002-2003 Icom Inc.

You might also like