The document summarizes the specifications of a 3-cylinder, 1028 cm3 diesel engine. It has a power rating of 19.5 kW/26.5 HP at 3600 rpm with maximum torque of 67 Nm at 2000 rpm. The engine is liquid cooled with indirect injection and has a displacement of 1028 cm3 across its 3 cylinders. It is compliant with EPA Tier 2 and 97/68/CE Step 2 emissions standards.
The document summarizes the specifications of a 3-cylinder, 1028 cm3 diesel engine. It has a power rating of 19.5 kW/26.5 HP at 3600 rpm with maximum torque of 67 Nm at 2000 rpm. The engine is liquid cooled with indirect injection and has a displacement of 1028 cm3 across its 3 cylinders. It is compliant with EPA Tier 2 and 97/68/CE Step 2 emissions standards.
The document summarizes the specifications of a 3-cylinder, 1028 cm3 diesel engine. It has a power rating of 19.5 kW/26.5 HP at 3600 rpm with maximum torque of 67 Nm at 2000 rpm. The engine is liquid cooled with indirect injection and has a displacement of 1028 cm3 across its 3 cylinders. It is compliant with EPA Tier 2 and 97/68/CE Step 2 emissions standards.
The document summarizes the specifications of a 3-cylinder, 1028 cm3 diesel engine. It has a power rating of 19.5 kW/26.5 HP at 3600 rpm with maximum torque of 67 Nm at 2000 rpm. The engine is liquid cooled with indirect injection and has a displacement of 1028 cm3 across its 3 cylinders. It is compliant with EPA Tier 2 and 97/68/CE Step 2 emissions standards.
Construction 4-stroke diesel engine with cylinders in line Liquid-cooled with axial fan. Indirect injection with injector-pump on head. Single-shaft distribution in head. Distribution control with timing belt. Double pto on the crankshaft. Pto on the distribution. Counterclockwise rotation. Forced lubrication with vane pump on the crankshaft. Total passage external oil filter. Water pump in the engine block. Automatic extra fuel starting device. Centrifugal governor. Applications Torque regulator. Excavator Cast iron engine block with re-borable Generating set integral liners. Refrigerating unit Aluminium cylinder head. Sweeper Access platform Roller Lawn mower Dumper
1 OF 4 PAGES DIESEL SERIE FOCS Subwoofer
Specifications
Cylinders N. 3 Displacement cm3 1028 Bore mm 75 LDW 1003
Stroke mm 77,6 Compression ratio 22.8:1 Rating kW/HP N (80/1269/CEE) ISO 1585 19.5/26.5 NB ISO 3046 IFN 18.0/24.5 NA ISO 3046 ICXN 16.5/22.4 Max. torque Nm. 67@2000 Max. torque 3 P.T.O. Nm. 37.0@1800 Min. idling speed 900 Water pump delivery at 3600 r.p.m. l/min. 50 (~) Oil consumption kg/h. 0.013 Oil sump capacity l 2.4 Min. allowable oil pressure BAR 1.5 Max. allowable inclination for short periods of operation (peak values) 25° (35°) Vol. of air required for correct cooling @ 3600 r.p.m. l/min. 1850 Vol. of air required for correct combustion @ 3600 r.p.m. m3/min. 63 Dry weight kg 85 Recommended battery V/Ah 12/44 Minimum pulley diameters for belt drive
Sound pressure level dB (A)
15° Sound level polar diagram open field - 7 meters micro- phone - no load running engine.
C C dB (A) 80
30° 70
60
V belt D (mm) ≥ 114 [L (mm) + 101] N (kW)
n (RPM)
Cogged belt D (mm) ≥ 79 [L (mm) + 101] N (kW)
n (RPM)
Max. allowable axial load in both directions A-B = 300 kg
C - zone in which the radial load acts on the pulley
CV kW Nm kgm N Power curve - 80/1269/CEE - ISO 1585 - MB 55 5.6 NB Power curve - ISO 3046/1 - IFN - 14 50 5.1 NA Power curve - ISO 3046/1 - ICXN - MA 45 4.6 MN Torque curve - (N curve) 18 13 40 4.1 MB (B curve - MA (A curve) NB 17 35 3.6 C Specific fuel consumption - (NB curve) 12 16 NA
3 OF 4 PAGES DIESEL SERIE FOCS Technical drawings * 412 513 242.5 137 117 166 169.5 LDW 1003
369.5 515.5 12
16 58
30 146
N. 4 fori N. 8 fori M12x1.75 M8x1.25
88 88 266 102 102 66 286 158
* More specific dimensions are available on www.lombardini.it (see table at the bottom of the page)
Standard equipment Accessories
External oil filter Different guards according to use
Intake manifold Clutch flywheels Exhaust manifold Flanges Intake fan Transmission adaptors Accelerator control Keyswitch panel Electric starter and 12V alternator Electric stop Thermostatic valve Electronic plant for plugs Fuel feed diaphragm pump Alternators 12V or 24V Water pump Radiators Flanging plate Blowing fan Flywheel with ring gear Engine feet Use, maintenance and spare parts booklet Fuel tanks Mufflers Dry air-cleaners mounted and separated Cyclonic precleaners Fuel filter on engine High capacity oil sumps Cab heating system
Files for this product available on www.lombardini.it
Data sheet LDW1003DS.PDF ISO 9001 Cert. n. 0446 - 1405 QS. 9000 Cert. n. 2231/0 Owner manual LDW1003OM.PDF Service manual LDW1003SM.PDF Technical drawing LDW1003TD.DWG Power curve LDW1003PC.PDF
LOMBARDINI RESERVES THE RIGHT TO MAKE MODIFICATIONS WITHOUT PRIOR NOTICE
Via Cav. del Lavoro Adelmo Lombardini, 2 mod. 50986/5 42100 Reggio Emilia Italia Tel. ++39 0522.3891 Fax ++39 0522.389503 www.lombardini.it 4 OF 4 PAGES
