Scribd Logo
Upload

Welcome to Scribd!

  • 50 views

    Ardx 20 Flatmanual

    Uploaded by

    bbtr
    The ARDX20 dual analog delay pedal takes the features of the previous AR20DL single analog delay and adds more controls and functionality. It was designed by Ohbayashi San of Analog Man Asia in Japan and has two channels that can each independently control delay time, level, and feedback. Additional optional accessories allow for tap tempo, presets, and other expanded controls. The pedal provides over 600ms of analog delay time with clear repeats and easy feedback control.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Ardx 20 Flatmanual

    Uploaded by

    bbtr
    50 views1 page
    The ARDX20 dual analog delay pedal takes the features of the previous AR20DL single analog delay and adds more controls and functionality. It was designed by Ohbayashi San of Analog Man Asia in Japan and has two channels that can each independently control delay time, level, and feedback. Additional optional accessories allow for tap tempo, presets, and other expanded controls. The pedal provides over 600ms of analog delay time with clear repeats and easy feedback control.

    Original Title

    ardx20Flatmanual.doc

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The ARDX20 dual analog delay pedal takes the features of the previous AR20DL single analog delay and adds more controls and functionality. It was designed by Ohbayashi San of Analog Man Asia in Japan and has two channels that can each independently control delay time, level, and feedback. Additional optional accessories allow for tap tempo, presets, and other expanded controls. The pedal provides over 600ms of analog delay time with clear repeats and easy feedback control.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    50 views1 page

    Ardx 20 Flatmanual

    Uploaded by

    bbtr
    The ARDX20 dual analog delay pedal takes the features of the previous AR20DL single analog delay and adds more controls and functionality. It was designed by Ohbayashi San of Analog Man Asia in Japan and has two channels that can each independently control delay time, level, and feedback. Additional optional accessories allow for tap tempo, presets, and other expanded controls. The pedal provides over 600ms of analog delay time with clear repeats and easy feedback control.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 1

    Analog Man ARDX20 Dual Analog Delay June-2015

    The ARDX20 takes the great sound of our previous AR20DL single analog delay, but adds more features.
    It was designed by Ohbayashi San of Analog Man Asia in Japan, with design and specification help from Analogmike.
    We built a custom circuit board and specially designed ergonomic enclosure for this pedal. They are hand soldered (no
    machine soldering or surface mount parts) and assembled to our specs in China. Then the pedals go to Japan for
    calibration and tuning at the Analog Man Asia shop by Ohbayashi san and his team.

    This delay was designed for ease of use and the best sound possible, with standard features everyone can use, plus
    optional external features for things everyone may not want to pay for up front. The external options like tap tempo,
    presets, etc, are an additional AMAZE0 pedal with a computer in it to control this delay.

    1. True bypass switching, right side foot switch.


    2. Two sets of controls, not only delay time but also delay level and feedback
    YELLOW channel (upper 3 knobs) or RED channel (lower knobs) are selected with the left switch.
    3. Battery or normal 9V boss type power. Do not use higher voltage. Power jack in the center top.
    4. Battery compartment on the bottom (old rounded case) for quick and easy battery changes.
    5. Low power consumption, 15mA, so an alkaline battery should last about 30 hours of use.
    6. Jacks are on the top of the pedal for efficient layout on pedal boards.
    7. Input jack on the right, unplug to disconnect battery. Output jack on the left.
    8. EFFECTS LOOP is next to the input jack. Use a Y-cable (insert cable) to run an effect only when the delay is ON
    and only on the delayed sound. Modulation pedals are cool here. Or use a VOLUME pedal with a Y-Cable or an
    expression pedal to control the level of the delays, pulling back all the way will kill the delay sound. You can also
    control the FEEDBACK this way, as lowering the volume will reduce the feedback so you can easily control infinite
    delays.
    9. DELAY TIME EXPRESSION jack is next to the output jack. Use a normal Boss EV5 type expression pedal to
    control the delay time of the RED channel. This jack will also be used for external options we will introduce including
    AMAZE0, multiple delay time preset boxes, etc.
    10. Over 600mS analog delay time, with clear, not dull, delay sounds. The delays are easily controlled for infinite
    feedback without runaway volume problems which can damage your speakers.
    11. You can plug into the EFFECTS LOOP to get a WET ONLY sound, when the pedal is ON. The dry sound will come
    out of the normal output. You will need a special cable to get the wet output, with the ring on the pedal side connected
    to the tip of the output cable and the tip on the pedal side grounded to kill noise.
    12. Two LED lights blink in time to the delay setting.
    13. Flat case version has an internal DARK switch to reduce the high end on the repeats. The dry signal is not changed.
    The miniature sliding toggle switch is on the back side of the board.
    14. Optional AMAZE0 controller can be added any time for tap tempo, 10 presets, modulation, etc.

    ENJOY!!!! Analog Man Guitar Effects, 1D Garella Road, Bethel, CT 06801

    [email protected] http://www.analogman.com (203) 778-6658


    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
    must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for
    compliance could void the user's authority to operate the equipment.

    You might also like