Scribd
Upload
333 views1 page

Osiloscope

This document provides specifications for a 100MHz, 2-channel digital storage oscilloscope with the following key features: - It has a 100MHz bandwidth, 1GS/s sample rate, and 25kpts memory depth. - Trigger modes include edge, pulse width, runt, over amplitude, slope and video. - It has an 8-inch LCD, USB and pass/fail interfaces, and comes with passive probes and software. - Additional features include 20,000 wfms/s acquisition, 2ns/div to 50s/div timebase, and auto measurements.

Uploaded by

TeguhSunyoto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
333 views1 page

Osiloscope

This document provides specifications for a 100MHz, 2-channel digital storage oscilloscope with the following key features: - It has a 100MHz bandwidth, 1GS/s sample rate, and 25kpts memory depth. - Trigger modes include edge, pulse width, runt, over amplitude, slope and video. - It has an 8-inch LCD, USB and pass/fail interfaces, and comes with passive probes and software. - Additional features include 20,000 wfms/s acquisition, 2ns/div to 50s/div timebase, and auto measurements.

Uploaded by

TeguhSunyoto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

10162915 DIGITAL STORAGE OSCILLOSCOPE

SPECIFICATIONS
Channels 2
Bandwidth 100MHz
Sample rate 1GS/s (single channel), 500MS/s (dual channel)
Rise time ≤3.5ns
Memory depth 25kpts
Waveform acquisition rate 7000 to 8999 Hz, adjustable
Vertical sensitivity 1mV/div to 20V/div (1MΩ)
Time-base range 2ns/div to 50s/div
Storage Setup, Waveform, Bitmap
Trigger mode Edge, Pulse Width, Runt, Over amplitude, Video,
Slope
Trigger frequency 6 bits
Trigger type Auto, normal, single
Pulse Width range 100ns to 10s
Signal mode and Line/Field Supports standard NTSC and PAL signal mode, line
FEATURES range is 1 to 525 (NTSC) and 1 to 625 (PAL)
 100MHz bandwidth, 1GSa/s real-time sampling rate
Auto measurement Max, Min, Peak-Peak, Amplitude, Top, Bottom,
 2 channels
Cycle Average, Average, Crms, RMS, Area, Cycle
 25 kpts memory depth area, Overshoot, Preshoot, RPRE, FPRE, Rise
 20,000 wfms/s waveform acquisition rate Time, Fall Time, Frequency, Period, Pulse Width,
 2 ns/div to 50 s/div time-base +Width, -Width, Burst Width, +Duty, -Duty, Phase,
 Trigger modes: Edge, Pulse Width, Runt, Over-amplitude, Slope and FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, 34
Video measuring parameters in total
 Calibration signal output: 10Hz, 100Hz, 1kHz (default), 10kHz and Storage waveform 20 internal settings/waveform, 200 settings/
100kHz waveform in U disc, deep storage CSV in U disc
 Input calibration signal only by pressing a button
Interface USB OTG, Pass/Fail
 10Mpts waveform recording
 8-inch TFT LCD, WVGA (800×480) Product color White and gray
 USB OTG and Pass/Fail interfaces Display 8-inch TFT LCD, 800×RGB×480
 Standard accessory: Power cord, USB cable, 2 sets of passive probes Power 100 to 240 VACrms, 50/60Hz
(100MHz), PC software CD (with manual and application software Product size (W×H×D) 336mm×164mm×108mm
inside)
Product net weight 3.35kg

You might also like