Scribd
Upload
194 views1 page

Wooden Crate Plans: Directions: Glue and Nail All Boards

This document provides instructions for building a wooden crate from various lumber materials. The materials list includes pine and fir boards of different dimensions. Cutting instructions are provided for the lumber to construct the bottom, sides, ends and lid of the crate. Directions specify to glue and nail the boards together to form the box structure and attach a lid with corner cleats.

Uploaded by

eric pacha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
194 views1 page

Wooden Crate Plans: Directions: Glue and Nail All Boards

This document provides instructions for building a wooden crate from various lumber materials. The materials list includes pine and fir boards of different dimensions. Cutting instructions are provided for the lumber to construct the bottom, sides, ends and lid of the crate. Directions specify to glue and nail the boards together to form the box structure and attach a lid with corner cleats.

Uploaded by

eric pacha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Wooden crate plans

Wendell K. Smith

1 square = 1 inch (Actual wood thickness is approx 3/4 inch)

Materials:
1 ea 1" X 12" X 8 Pine board
1 ea 1" X 6" X 24" pine board
1 ea 1" X 8" X 24" pine board
1 ea 1" X 2" X 8' fir
1 ea 1" X 3" X 8' fir
1 pound #6 X 1 1/2" finish nails
1 bottle carpenters glue

Cut lumber dimensions:


6 ea 1" X 2" X 12 3/4"
4 ea 1" X 3" X 12 3/8"
2 ea 1" X 3" X 7 3/4"
1 ea 1" X 6" X 23 1/2"
1 ea 1" X 8" X 23 1/2"
1 ea 1" X 12" X 20 1/2"
2 ea 1" X 12" X 11 1/4"
2 ea 1" X 12" X 22"

NOTE: 1 X 12 lumber is actually


3/4 X 11 1/4 This is figured into the
cut dimensions.

Directions: Glue and nail all boards


during construction. Attach ends to
bottom, then sides. Assemble ends
as shown. Attach cleats to bottom of
box. Assemble lid by gluing the
edges together, then attaching cleats.
Cut out the corners to fit. Paint as
desired.

You might also like