0% found this document useful (0 votes)
128 views3 pages

5 Inch Stereo Connectors

The document describes various audio unit connectors used for inputs and outputs. Connector A is a 24-pin connector that provides outputs for different speakers, inputs from control switches, and communication signals. Connector C is a 32-pin connector that includes connections for a rearview camera and microphone. Connectors E and F are for antenna and USB connections, respectively.

Uploaded by

donald nugraha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
128 views3 pages

5 Inch Stereo Connectors

The document describes various audio unit connectors used for inputs and outputs. Connector A is a 24-pin connector that provides outputs for different speakers, inputs from control switches, and communication signals. Connector C is a 32-pin connector that includes connections for a rearview camera and microphone. Connectors E and F are for antenna and USB connections, respectively.

Uploaded by

donald nugraha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Audio Unit Connector for Inputs and Outputs

Connector Index
Audio Unit Connector A (24P)
Audio Unit Connector C (32P)
Audio Unit Connector E (3P)
Audio Unit Connector F (5P)

AUDIO UNIT CONNECTOR A (24P)

Cavity Terminal Name Description


A1 GND Ground for audio unit (G504)
A2 Not used ―――
A3 +B AUDIO Continuous power source
A4 Not used ―――
A5 RL SPKR+ Outputs sound signal for left rear speaker
A6 RL SPKR- Outputs sound signal for left rear speaker
A7 RR SPKR+ Outputs sound signal for right rear speaker
A8 RR SPKR- Outputs sound signal for right rear speaker
A9* AUDIO REMOTE SW Detects control signal from audio remote switch
A10 Not used ―――
A11 Not used ―――
A12 K LINE Detects scan tool signal (serial data)
A13 Not used ―――
A14 B­CAN_H Communication signal
A15 FL SPKR+ Outputs sound signal for driver's door speaker
A16 FL SPKR- Outputs sound signal for driver's door speaker
A17 FR SPKR+ Outputs sound signal for front passenger's door speaker
A18 FR SPKR- Outputs sound signal for front passenger's door speaker
A19* REMOTE SW GND Ground for audio remote­HFL switch
A20* HFT/NAVI REMOTE SW Detects control signal from HFL switch
A21 Not used ―――
A22 Not used ―――
A23 ACC Power source for accessories
A24 B­CAN_L Communication signal

*: Without multi­information display (MID)
AUDIO UNIT CONNECTOR C (32P)

Cavity Terminal Name Description


C1 Not used ―――
C2 Not used ―――
C3 Not used ―――
C4 Not used ―――
C5 Not used ―――
C6 SH MIC Shield for terminals No. 22 and No. 23
C7 Not used ―――
C8 Not used ―――
C9 Not used ―――
C10 IG1 METER IG1 power source (Not used)
C11 Not used ―――
C12 Not used ―――
C13* CAMERA VCC Power source for rearview camera
C14* CAMERA GND Ground for rearview camera
C15 Not used ―――
C16* CAMERA ADPT Detects connection for rearview camera
C17 Not used ―――
C18 Not used ―――
C19 Not used ―――
C20 Not used ―――
C21 Not used ―――
C22 MIC+ Inputs sound signal from HFL microphone
C23 MIC GND Ground for HFL microphone
C24 Not used ―――
C25 Not used ―――
C26 Not used ―――
C27 Not used ―――
C28* SH CAMERA Shield for terminals No. 13, No. 14, and No. 29
C29* CAMERA V Inputs NTSC video signal from rearview camera
C30 Not used ―――
C31* CAMERA BIT0 Outputs mode select signal for rearview camera
C32* CAMERA BIT1 Outputs mode select signal for rearview camera

*: With rearview camera
AUDIO UNIT CONNECTOR E (3P)

Cavity Terminal Name Description


E1 ANT+B Power source for AM/FM antenna amplifier
E2 RF IN Inputs AM/FM signal
E3 SH(RF IN) Shield for terminal No. 2

AUDIO UNIT CONNECTOR F (5P)

Cavity Terminal Name Description


F1 USB1 GND Ground for USB port
F2 USB1 VBUS Outputs power source for USB port
F3 USB1 DATA+ Communication signal
F4 USB1 DATA- Communication signal
F5 USB1 SH Shield for terminals No. 1, No. 2, No. 3, and No. 4

You might also like