Scribd
Upload
113 views2 pages

Load Schedule

Uploaded by

scapade reborn

The document outlines the schedule of loads for 9 electrical circuits. It details the load description, voltage, amps per circuit, and protection for circuits 1-7. The total connected load is 6412 amps at 230 volts. Based on the calculations, the recommended wire size is 2-8.0 mm2 THHN wires and 1-5.5mm2 THHN wire installed in a 25mm diameter EMT pipe. The table also lists the recommended wire size and conduit for each circuit.

Copyright:

© All Rights Reserved
Download as XLSX, PDF, TXT or read online from Scribd
Download as xlsx, pdf, or txt

Load Schedule

Uploaded by

scapade reborn
113 views2 pages
The document outlines the schedule of loads for 9 electrical circuits. It details the load description, voltage, amps per circuit, and protection for circuits 1-7. The total connected load is 6412 amps at 230 volts. Based on the calculations, the recommended wire size is 2-8.0 mm2 THHN wires and 1-5.5mm2 THHN wire installed in a 25mm diameter EMT pipe. The table also lists the recommended wire size and conduit for each circuit.

Original Description:

electrical schedule of loads

Copyright

© © All Rights Reserved

Available Formats

XLSX, PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

The document outlines the schedule of loads for 9 electrical circuits. It details the load description, voltage, amps per circuit, and protection for circuits 1-7. The total connected load is 6412 amps at 230 volts. Based on the calculations, the recommended wire size is 2-8.0 mm2 THHN wires and 1-5.5mm2 THHN wire installed in a 25mm diameter EMT pipe. The table also lists the recommended wire size and conduit for each circuit.

Copyright:

© All Rights Reserved
Download as XLSX, PDF, TXT or read online from Scribd
Download as xlsx, pdf, or txt
113 views2 pages

Load Schedule

Uploaded by

scapade reborn
The document outlines the schedule of loads for 9 electrical circuits. It details the load description, voltage, amps per circuit, and protection for circuits 1-7. The total connected load is 6412 amps at 230 volts. Based on the calculations, the recommended wire size is 2-8.0 mm2 THHN wires and 1-5.5mm2 THHN wire installed in a 25mm diameter EMT pipe. The table also lists the recommended wire size and conduit for each circuit.

Copyright:

© All Rights Reserved
Download as XLSX, PDF, TXT or read online from Scribd
Download as xlsx, pdf, or txt
You are on page 1/ 2

SCHEDULE OF LOADS

TOTAL VOLT
CKT NO. LOAD DESCRIPTION VOLTS AMP/CKT PROTECTION
AMPS
1 8 LIGHTING OUTLET 230 400 1.74 20AT
2 8 LIGHTING OUTLET 230 400 1.74 20AT
3 8 LIGHTING OUTLET 230 400 1.74 20AT
4 8 LIGHTING OUTLET 230 400 1.74 20AT
5 6 CONVINIENCE OUTLET 230 1080 4.70 30AT

6 230 1866 8.11 30AT


ACU (2 HP)

7 230 1866 8.11 30AT


ACU (2 HP)
8 SPARE
9 SPARE
TOTAL CONNECTED LOADS 6412 27.88

I= ((6412 + 373)/230)(0.80 DF)


I= 23.6A
USE= 2-8.0 MM2 THHN WIRE + 1-5.5MM2 THHN WIRE IN 25MMᴓ EMT PIPE
OF LOADS
SIZE OF WIRE CONDUIT

2-3.5 MM2 THHN WIRE 20MMᴓ

2-3.5 MM2 THHN WIRE 20MMᴓ

2-3.5 MM2 THHN WIRE 20MMᴓ

2-3.5 MM2 THHN WIRE 20MMᴓ

2-5.5 MM2 THHN WIRE + 1-3.5 MM2 THHN WIRE 25MMᴓ

2-5.5 MM2 THHN WIRE + 1-3.5 MM2 THWN WIRE 25MMᴓ

2-5.5 MM2 THHN WIRE + 1-3.5 MM2 THWN WIRE 25MMᴓ

You might also like