Scribd Logo
Upload

Welcome to Scribd!

  • 126 views

    Rahul Girkar Resume

    Uploaded by

    rahul
    1. Girkar Rahul Satapa is seeking opportunities in design and finite element analysis in the oil, gas, and fertilizer industries with over 3 years of experience. 2. He holds an M.Tech in Mechanical Machine Design from SPCE Mumbai and has sound knowledge of pressure equipment design, finite element analysis, and fracture mechanics. 3. Currently, he works as a Design Engineer at New Horizons Consulting Engineers where he is responsible for designing critical equipment like heat exchangers and storage tanks using various codes and performing FEA and fatigue analysis.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Rahul Girkar Resume

    Uploaded by

    rahul
    126 views4 pages
    1. Girkar Rahul Satapa is seeking opportunities in design and finite element analysis in the oil, gas, and fertilizer industries with over 3 years of experience. 2. He holds an M.Tech in Mechanical Machine Design from SPCE Mumbai and has sound knowledge of pressure equipment design, finite element analysis, and fracture mechanics. 3. Currently, he works as a Design Engineer at New Horizons Consulting Engineers where he is responsible for designing critical equipment like heat exchangers and storage tanks using various codes and performing FEA and fatigue analysis.

    Original Description:

    Abcd

    Original Title

    1559827110779_Rahul Girkar Resume(1)(1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. Girkar Rahul Satapa is seeking opportunities in design and finite element analysis in the oil, gas, and fertilizer industries with over 3 years of experience. 2. He holds an M.Tech in Mechanical Machine Design from SPCE Mumbai and has sound knowledge of pressure equipment design, finite element analysis, and fracture mechanics. 3. Currently, he works as a Design Engineer at New Horizons Consulting Engineers where he is responsible for designing critical equipment like heat exchangers and storage tanks using various codes and performing FEA and fatigue analysis.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    126 views4 pages

    Rahul Girkar Resume

    Uploaded by

    rahul
    1. Girkar Rahul Satapa is seeking opportunities in design and finite element analysis in the oil, gas, and fertilizer industries with over 3 years of experience. 2. He holds an M.Tech in Mechanical Machine Design from SPCE Mumbai and has sound knowledge of pressure equipment design, finite element analysis, and fracture mechanics. 3. Currently, he works as a Design Engineer at New Horizons Consulting Engineers where he is responsible for designing critical equipment like heat exchangers and storage tanks using various codes and performing FEA and fatigue analysis.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    RESUME

    Girkar Rahul Satapa


    Email ID: [email protected]
    Mobile No: 7972846024

    OVERVIEW
     Over 3 years of experience in Design & Finite Element Analysis in Oil and Gas,
    & Fertilizer Industry. Knowledge of international codes such as ASME Sec. VIII
    Div. 1 & Div. 2, API-650, TEMA Standard
     M.Tech. from SPCE, Mumbai in Mechanical Machine Design From 2015 to
    2017.
     Sound Knowledge of Pressure Equipment Design, Finite Element Method
    Solid Mechanics & Fracture Mechanics.
    INDUSTRY EXPERIENCE
     Design Engineer at New Horizons Consulting Engineers LLP, Mumbai (2017- till
    date)
    Responsibilities:
    1. Design of Pressure Vessels, Heat Exchangers and Tanks for Petrochemical &
    Refinery Industry. Designed critical equipment successfully such as DFU heat
    exchanger, high pressure reactors, API storage tanks using ITS etc.
    2. Perform FEA of Pressure vessels, Heat exchangers & pressure equipment
    components and Fatigue life evaluation of Pressure vessels, Heat exchangers.
    3. Coordinating with other engineering disciplines and interacting with
    customers & vendors. Check compliance of vendor documents with
    international codes, practices and project specifications.
    4. Check/review of Design Calculations & Fabrication Drawings and Inter
    disciplinary comments for Pressure vessels, heat exchangers & tanks.
    5. Calculation of dimension of pressure parts and non-pressure parts like
    Channel side internal assembly for high pressure heat exchanger, Baffles,
    Saddles, Lifting Lugs, Trunnions, Tailing Lugs, optimizing thickness with use of
    stiffeners etc. by using the first principles of Strength of Materials.
    6. Pipe flexibility analysis of Liquefaction skid as per ASME B31.3.
     Project Assistant at ThyssenKrupp Industrial Solutions, Mumbai. (2016-2017)
    Project: “Leak tightness analysis of bolted body flange of heat exchanger near
    pass partition plate"(M.Tech. thesis).
    1. Project involves investigation the behavior and sealing performance of
    flanged joint with a flat metal gasket of heat exchanger at vicinity of pass
    partition plate using finite element analysis.
    2. A 3- dimensional finite element model including contact elements & bolt pre-
    load tool is used for the analysis in ANSYS workbench 16.0. Results of contact
    pressure computed at gasket location are used to predict leakage behavior of
    the joint.
    3. Flange stresses obtained from the analysis are evaluated as per ASME
    criteria. Effect of difference in fluid temperature for the two passes and also
    the influence of insulation thickness on the leak tightness of joint is
    presented.
    4. Possible measures to mitigate leakage in such situation is discussed such as
    optimized insulation thickness, use welded gasket & fountain type tube
    layout for heat exchangers.

    EDUCATIONAL QUALIFICATIONS

    Exam. Board/ Univ. Year % or CGPI Class


    M. Tech - Sardar Patel college of 1st class with
    Machine Design Engineering, Mumbai. 2015-17 9.56/10 Distinction
    Shivaji University, 1st class with
    B. E. Mechanical
    Kolhapur 2010-14 71.06 Distinction
    Maharashtra State 1st class with
    H.S.C 2009-10 85.17
    Board Distinction
    Maharashtra State 1st class with
    S.S.C 2007-08 94.61
    Board Distinction

    TECHNICAL SKILLS
    Design software: COMPRESS, PV-Elite & ITS Tanks.
    CAE & CAD software: ANSYS 16.1, Solidworks, AutoPIPE, CATIA V5 & AutoCAD.
    Programming/ Mathematical Softwares: Mathcad, Minitab 16.0

    MAJOR ACADEMIC PROJECTS/SEMINARS

     Title: Zero turning radius vehicle: Case study and analysis (M Tech Course
    project, Duration: 1 semester)
    Overview: Study of Zero turning radius concept and different innovative
    wheel steering designs that overcome car driving difficulties like low speed
    cornering, vehicle parking and driving in city conditions with heavy traffic in
    tight spaces, vehicle on hilly road. Working of Zero turning radius mechanism,
    testing, different design approaches, material and component with static
    analysis, cost analysis, applications, future scope etc are studied & presented.

     Title: Reliability block diagram: Case study and industrial application


    (M tech Course project, Duration: 1 semester)
    Overview: Study of Probabilistic methods and failure assessment with help of
    reliability block diagram. Use of statistical softwares such as Windchill RBD
    Pro & Reliasoft BlockSim. Case study for optimistic use of RBD concept for
    management of Colorectal Cancer & for assembly line in industry.
     Project leader for academic B.E. project entitled “DESIGN OF EXPERIMENT
    (DOE): Research on estimation of boring insert for boring operation on
    aluminum"
    1) Project objective involves study and research analysis of various factors
    affecting boring operation so as to reduce production cost, time and waste of energy
    2) Optimized boring insert with their included angles, material and type with
    optimum process parameters like speed, feed, depth of cut and effect of coolant are
    estimated using tool of D.O.E., regression analysis, ANNOVA, gray analysis
    3) Carried out experimental on CNC machine and statistical analysis of boring
    operations with different parameters with use of statistical software such as Minitab
    16.0.
     In-plant training(B.E.)
    4 month in plant training at “Gaurav Machine Tools” MIDC,Gokul Shirgaon,
    Kolhapur.

    PUBLICATION
    Research paper titled “Leak tightness analysis of bolted body flange of heat
    exchanger near pass partition plate" is published & presented in International
    conference on Mechanical and Production Engineering (ICMAPE) organized by
    SARC(South Asian Research Center) also published in International Journal of
    Management and Applied Science (IJMAS).

    PERSONAL DETAILS
    Date of Birth: 25st November, 1992
    Languages: English, Hindi & Marathi.
    Nationality: Indian

    CO-CURRICULAR ACTIVITIES & ACHIVEMNETS


     Completed Two week training course on "PRESSURE EQUIPMENT DESIGN
    AND PIPING ENGINEERING" under AKER SOLUTIONS, India.
     Completed One week training course on "INDUSTRIAL TRIBOLOGY" under
    GIAN (Global Initiative Of Academic Networks),VJTI, Mumbai.
     Attended workshop on Machine Tools and Cutting Technology approved by
    Indian Society for Technical Education(ISTE).
     Worked as Manager, Event coordinator in National level Technical event
    INFINITY 2012 & INFINITY 2013 held at DYPCET, Kolhapur.
     Secured 1st rank in SSC Board examination in high school
     Secured 3rd position in Zonal rounds of a national level robotics
    championship, ROBOTRYST-2013 in association with IIT-Delhi.
    DECLARATION

    I hereby declare that the above mentioned information is correct up to my


    knowledge.

    Yours Faithfully,

    (Girkar Rahul Satapa)

    You might also like