Scribd
Upload
234 views3 pages

Design of Corbel: Check For Depth: For Shear Force Consideration

1) The document describes the design of a corbel to support a vertical load of 10 MT and moment of 10 tm. 2) The depth of the corbel is determined to be 425 mm to satisfy shear and moment requirements. 3) The main reinforcement consists of 5 bars of 16 mm diameter to resist the tensile force of 5.58 MT. Shear reinforcement of 5 ties of 10 mm diameter spaced at 60 mm is also designed. 4) The shear capacity of the section is calculated to be 75.35 MT which is safe to resist the design shear force.

Uploaded by

epe civil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
234 views3 pages

Design of Corbel: Check For Depth: For Shear Force Consideration

1) The document describes the design of a corbel to support a vertical load of 10 MT and moment of 10 tm. 2) The depth of the corbel is determined to be 425 mm to satisfy shear and moment requirements. 3) The main reinforcement consists of 5 bars of 16 mm diameter to resist the tensile force of 5.58 MT. Shear reinforcement of 5 ties of 10 mm diameter spaced at 60 mm is also designed. 4) The shear capacity of the section is calculated to be 75.35 MT which is safe to resist the design shear force.

Uploaded by

epe civil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

DESIGN OF CORBEL

1200
c 10 Mt
200
av 10
Vertical Load Fv = 10 MT
Moment about X axis Mx = 10 tm
Distance of Load av = 0.2 m 200
Grade of Concrete fck = 25 N/mm2 425 Ds
Grade of Steel fy = 415 N/mm2
Cover Co = 40 mm
Diameter of Main bar Dia = 16 mm
Diameter of Shear bar Dia1 = 10 mm
Breadth of Column/corbel b = 0.6 m 600
1200 600
Width of the column, C = 1.2 m 1200 c
a
Length of the Corbel, a = 0.6 m 600
Self weight of the corbel, Sw = 0.35625 t 600 b

Fv
Check for Depth:
For Shear force Consideration a
Permissible shear Strength, τc max = 3.1 N/mm2 v β
Ft
Effective depth required, d = 53.76 mm 0.45
z D x
Overall Depth, Ds = 150.00 mm F D 0.45 fck
d f
cC s
For Moment Consideration x bx
0.45 C
Design moment @ Support, Mux = 12.06 tm x
Effective depth required, d = 241.41 mm
Overall Depth, Ds = 300.00 mm
FORCES IN CORBEL

Depth of Corbel required, D = 400


Overall Depth Provided, Ds = 425 mm
Effective depth Provided, d = 377 mm
Depth of Corbel at face, Df = 250.00 mm

Determination of Lever arm


(z/d)^2 – (r/(r+k))*(z/d) + (k/(r+k))*(av/d)^2 = 0

k = Fv / (0.88*fck*b*d) = 0.02
r = av/d = 0.53

Substituting k & r value, we get


(z/d)^2 – (r/(r+k)*(z/d) + (k/(r+k))*(av/d)^2 = 0
(z/d)^2 - 0.97 (z/d) + 0.02 = 0
(z/d)^2 - -0.96225 z/d + 0.01062343 = 0
z/d = 0.95108271
Lever arm z = 358.56 mm
Depth of Neutral depth x = 2.2 * (d-z)
x = 40.57 mm

Xu max = 180.96 mm
= 180.96 > 40.57
safe
Resolution of forces
Ft = Fv * (av/z) Or Fv/2
= 5.58 MT

Area of Tension steel


Ast = (Ft + Fh ) / fs
εs = (0.0035 * ( d – x)) / x
εs = 0.03
fs = 360.90 N/mm2

Ast = 286.96 mm2

No of bars required n = Ast / area of one bar


2.00 nos
Provided Ast Ast pro = 402.12 mm2

Check for Min & Max reinforcement


Percentage of Ast pro % Ast = 0.18 %
Min. Ast = 0.40 %
Max. Ast = 1.30 %
Result = Min reinforcement of 0.4 % should be provided

No of bars Provided n = 5 Nos


Percentage of Ast pro % Ast = 0.44

Provide the Main reinforcement as 5 nos. of 16 mm dia bars

Area of Shear Steel:


Horizontal direction
Minimum Reinforcement Asv = Ast/2
502.65 mm2
No of Ties = 5 Nos
Spacing = 60 mm
Provide 5 Nos of 10 mm dia 2 legged ties @ 60 mm spacing at a distance of 285 mm from the top of corbel

Shear Capacity of Section


Percentage of Ast pro, % Ast = 0.44 %
β = 6.53
Permissible Shear Stress, τc = 0.47 N/mm2
Increased Shear Stress, τm = τc * (2*d / av)
= 1.76 N/mm2

Shear Strength of Concrete, τsc = (τm * b * d ) / 1000


39.72 MT
Shear Strength of Steel, τss = (0.87*fy*Asv*d) / Sv
35.64 MT

Total Shear Strength, τs = 75.35 MT


SAFE
Mt

10 tm

Df 250.0
0

0.45
x
0.45 fck
bx

You might also like