Bluetooth page turner

USER MANUAL
Contents

Table of Contents
Contents2
English3
Safety Information3
iRig BlueTurn3
Register your iRig BlueTurn3
Installation and setup4
Mode 16
Mode 27
Mode 38
Virtual keyboard in iOS9
Startup notes9
Foot-switches backlite10
Status LED10
Troubleshooting10
Specifications11
Warranty11
Support and more info11
Regulatory12

­­­­­­­­­2
English

Safety Information
• To reduce risk of internal damage or malfunction, never expose the unit to rain, moisture or excessive
humidity. Never let any liquid spill on the unit.
• Always remove the batteries if you plan to not use the unit for a long time.
• Never expose the unit to a temperature higher than 60°C (140°F) .
• Never step over the unit or step on it with your full weight, this might cause permanent damages to the iRig
BlueTurn structure and foot switches.
• There are no user serviceable parts inside iRig BlueTurn, never open the unit.
• All servicing should be referred to qualified personnel only.
• iRig BlueTurn communicates via Bluetooth. Never insert iRig BlueTurn into metallic cases or structures that
could shield the Bluetooth signal.
• CAUTION: risk of explosion if battery is replaced by an incorrect type. iRig BlueTurn can ONLY be used
with consumer grade, non-rechargeable CARBON-ZINC or ALKALINE batteries.

iRig BlueTurn
Thank you for purchasing iRig BlueTurn.

Your package contains:

• iRig BlueTurn
• 2 x AAA batteries
• Quick Start Guide
• Registration Card

iRig BlueTurn is a Bluetooth controller pedalboard that sports two foot-switches for scrolling through lyrics or
guitar tabs from compatible Apps. The iRig BlueTurn is the perfect controller for Mac, iOS or Android devices
equipped for Bluetooth Low Energy.
iRig BlueTurn lets you take control with effortless scrolling through lyrics, guitar tabs and sheet music. It’s also
great for teleprompting, slide presentations, instrument effects, media control and more.

Register your iRig BlueTurn

By registering, you can access technical support, activate your warranty and receive free JamPoints™ which will
be added to your account. JamPoints™ allow you to obtain discounts on future IK purchases! Registering also
keeps you informed of all the latest software updates and IK products.
Register at: www.ikmultimedia.com/registration

­­­­­­­­­3
English

Installation and setup

1. Install the two AAA batteries into iRig BlueTurn’s battery compartment. It is very important to follow the
polarity indicators for the batteries that are indicated on the internal part of the battery compartment. iRig
BlueTurn works with Bluetooth LE technology. This allows for extra-low current consumption and very long
battery life.

2. Power ON the iRig BlueTurn : Push and hold one of the two foot switches plus the ON switch on iRig
BlueTurn (for the complete startup procedure, please refer to the “iRig BlueTurn modes” section in this
manual).

HOLD ON

­­­­­­­­­4
English

3. When the selected mode has been loaded iRig BlueTurn’s BlueTooth LED will start to blink.
4. Pair the iRig BlueTurn with your deivice. For Bluetooth pairing, please refer to your device’s BlueTooth pairing
procedure. The BlueTooth LED will remain lit.

Please note: iRig BlueTurn is discoverable for 30 seconds at start-up (only after a mode has been selected). If
no device has been connected after this time, iRig BlueTurn will hide and must be turned off and on again.
5. Download and launch the app.

iKlip Stage

ikdownloads.com/irigblueturn

­­­­­­­­­5
English

iRig BlueTurn modes

With iRig BlueTurn you can choose between 3 presets (modes) at start-up. Each preset sends different
messages. Please consult below for a list of available presets.

Mode 1
1. Turn the unit on: Hold one of the two foot switches and flip the ON switch to the ON position. The unit’s two
foot switch LEDS will start to blink.

HOLD ON

2. Pressing the “left” foot-switch cause iRig BlueTurn to boot in Mode 1. This is the most common MODE for
all iOS and Android APPS.

MODE 1

3. Pair iRig BlueTurn with your device. For Bluetooth pairing, please refer to your device’s BlueTooth pairing
procedure.

Left foot-switch: UP Arrow

Right foot-switch: DOWN Arrow

­­­­­­­­­6
English

Mode 2
1. Turn the unit on: Hold one of the two foot switches and flip the ON switch to the ON position. The unit’s two
foot switch LEDS will start to blink.

HOLD ON

2. Pressing the “right” foot-switch cause iRig BlueTurn to boot in Mode 2. This mode is primarily for MAC
document applications such as MS Word, Powerpoint, Acrobat, etc.

MODE 2

3. Pair the iRig BlueTurn with your device. For Bluetooth pairing, please refer to your device’s BlueTooth pairing
procedure.

Left foot-switch: Page UP

Right foot-switch: Page DOWN

­­­­­­­­­7
English

Mode 3
1. Turn the unit on: Hold one of the two foot switches and flip the ON switch to the ON position. The unit’s two
foot switch LEDS will start to blink.

HOLD ON

2. Pressing both the foot-switches will cause iRig BlueTurn to boot in Mode 3.

MODE 3

3. Pair the iRig BlueTurn with your device. For Bluetooth pairing, please refer to your device’s BlueTooth pairing
procedure.

Left foot-switch: LEFT Arrow

Right foot-switch: RIGHT Arrow

­­­­­­­­­8
English

Virtual keyboard in iOS

Lorem ipsum dolor sit

amet, consectetur
adipiscin

Lorem ipsum dolor sit

amet, consectetur
adipiscin

HOLD 3 sec.
Lorem ipsum dolor sit
amet, consectetur
adipiscin

HOLD 3 sec.
To turn the virtual keyboard on/off, put the cursor into a text box and press the left foot-switch “up arrow” on the
BlueTurn and hold it for at least 3 seconds.

Startup notes
• Powering up iRig BlueTurn without holding any switch will cause it to boot in the last mode used and the
corresponding LED(s) will light up for a second.
• When iRig BlueTurn is powered on while holding one of the switches, both LEDs will constantly flash until a
switch is pressed. It is not possible to pair your Bluetooth device during this time, a mode must be selected.
• Modes have pre-assigned HID messages assigned to switch controls. The associations can’t be edited.
• Starting up iRig BlueTurn while holding both foot-switches will make it boot in boot-loader mode: only
needed for firmware updates.
• iRig BlueTurn is discoverable for 30 seconds upon start-up (and only after a mode has been selected). If no
device has been connected to iRig BlueTurn after this time, it will hide and must be turned off and then on
again.

Foot switch backlighting

Once iRig BlueTurn is paired with a device, the two foot-switches will light up with a backlight that allows for
easy operation when ambient light is low.

­­­­­­­­­9
English

Status LED

This LED indicates the working status of iRig BlueTurn:

• OFF: iRig BlueTurn is OFF or the batteries are completely exhausted.
• Continuous flashing: iRig BlueTurn is ON and it is waiting to be paired with the device. After 30 seconds, if
not paired, iRig BlueTurn will enter sleep mode. To reactivate the unit, turn ON the power switch.
• Continuous ON: iRig BlueTurn is ON and paired with the device.
• Mostly OFF with fast ON flashes: iRig BlueTurn batteries are LOW and should be replaced as soon as
possible.

Remember to turn OFF iRig BlueTurn every time you finish using it to save battery life.

Troubleshooting
iRig BlueTurn is not turning ON.
Try replacing the batteries and check that their placement matches the polarity indicators.

I can’t connect iRig BlueTurn to my app.

Make sure that the app you are using supports HID message over external Bluetooth device. Make sure that
your device supports Bluetooth LE.

I can’t pair my BlueTooth device.

iRig BlueTurn is discoverable for 30 seconds upon start-up (only after a mode has been selected). After this
time, if no device has been connected, iRig BlueTurn turn will hide and must be turned off and on again.

­­­­­­­­­10
English

Specifications
• Communication: Bluetooth Low Energy (4.1).
• Approximate Range: 33 feet (10 Meters) subject to orientation and other factors.
• Two backlit foot switches.
• Low-intensity backlighting on all two foot-switches for easy visibility on low light stages.
• Long battery duration.
• Lightweight sturdy and durable construction.
• Size: 126mm x 93mm x 25mm

Warranty
Please visit:
www.ikmultimedia.com/warranty
for the complete warranty policy.

Support and more info

www.ikmultimedia.com/support

­­­­­­­­­11
Regulatory

Regulatory
Model: iRig BlueTurn
Model Number: IK000078

U.S.A.

Contains Bluetooth shutter with FCC ID : WAP2001

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC radiation exposure statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. End users must
follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CANADA

Contains/Contient Bluetooth shutter with IC ID: 7922A-2001

IC statement/warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause undesired operation of the device.

To comply with Industry Canada RF radiation exposure limits for general population, the antenna(s) used for this transmitter must be installed such that a minimum separation distance of 20cm is maintained between the radiator
(antenna) and all persons at all times and must not be co-located or operating in conjunction with any other antenna or transmitter

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Avertissement IC

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

1. l’appareil ne doit pas produire de brouillage, et

2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Pour satisfaire les limites d’exposition aux radiations RF de l’Industry Canada, les antennes utilisées pour cet émetteur doivent être installées de façon telle qu’au moins 20cm séparent l’émetteur (antenne) de toute personne, et ne
doivent être ni situées ni utilisées en conjonction avec n’importe quelle autre antenne ou émetteur.

EUROPE

AUSTRALIA/NEW ZEALAND

JAPAN

005-101007

UNITED ARAB EMIRATES

TRA
REGISTERED N°: ER44686/16 DEALER N°: DA45962/15

iRig® BlueTurn, AmpliTube®, VocaLive™, SampleTank®, iGrand Piano™ are trademarks or registered trademarks property of IK Multimedia Srl. All other product names and images, trademarks and
artists names are the property of their respective owners, which are in no way associated or affiliated with IK Multimedia. iPad, iPhone, iPod touch, Mac, Mac logo and GarageBand are trademarks of
Apple Computer, Inc., registered in the U.S. and other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.

2016/03/04

­­­­­­­­­12