Scribd
Upload
724 views2 pages

IFM Speed Relay DD0203 Data Sheet

The DD0203 is a speed monitor that can monitor speeds between 0.1-10 Hz and 10-1000 Hz. It has one digital input that can accept signals up to 5000 Hz. It has one relay output and one transistor output. The unit is powered by 110-240V AC or 24V DC and can operate in environments from -25-60°C. It is housed in a DIN rail enclosure and has displays for power, input pulses, output status, and enable signal.

Uploaded by

Raymund Gatoc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
724 views2 pages

IFM Speed Relay DD0203 Data Sheet

The DD0203 is a speed monitor that can monitor speeds between 0.1-10 Hz and 10-1000 Hz. It has one digital input that can accept signals up to 5000 Hz. It has one relay output and one transistor output. The unit is powered by 110-240V AC or 24V DC and can operate in environments from -25-60°C. It is housed in a DIN rail enclosure and has displays for power, input pulses, output status, and enable signal.

Uploaded by

Raymund Gatoc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DD0203 - Speed monitor - eclass: 27230220 / 27-23-02-20 https://www.ifm.com/products/us/ds/DD0203.

htm

DD0203
D200/FR1A 110-240VAC 24VDC Evaluation systems, power supplies

1: plug-in screw terminals


2: label
3: potentiometer
4: Mounting on DIN rail

Product characteristics

Speed monitor
D200
Housing for DIN rail mounting
Setting range 0.1...10 Hz / 10...1000 Hz

Application

Application evaluation of pulse sequences with regard to overspeed and underspeed; rotational
speed monitoring
Switching function F1-F4, with potentiometer
Switching output relay (1 changeover contact); transistor output (pnp switching; external supply)

Electrical data

Nominal voltage [V] 110...240 AC / 27 (24) DC


Nominal frequency [Hz] 50...60
Voltage tolerance [%] -20/+10 AC / -20/+10 DC
Power consumption DC [W] 4
Power consumption AC [W] 6
Sensor supply [V] 18.5...30 DC SELV, ≤ 100 mA

Inputs

Digital 1
signal input PNP (type 2 acc. to IEC 61131-2)
Input frequency [Hz] ≤ 5000 (accordingly min. pulse/pause length of 0.1 ms)

Outputs

Relay
Relay 1
Contact rating 4 A (240 V AC, 24 V DC); resistive load
Electrically separated yes
Insulation rating reinforced (to EN 61010)
Overvoltage category II
Degree of soiling 2 (≤ 240 V AC)
Transistor
Digital 1
Switching voltage [V] 10...30 DC SELV
Current rating [mA] ≤ 100

1 of 2 3/30/2017 3:46 PM
DD0203 - Speed monitor - eclass: 27230220 / 27-23-02-20 https://www.ifm.com/products/us/ds/DD0203.htm

Short-circuit proof yes

Measuring / setting range

Setting range [Hz] 0.1...10 / 10...1000


Adjustment of the switch point 2 ranges preselectable, fine adjustment with potentiometer
Hysteresis [% of Sp] 1...100
Start-up delay [s] 0.1...15

Environment

Ambient temperature [°C] -25...60


Storage temperature [°C] -25...70
Max. relative air humidity [%] 80 % (31 °C), linearly decreasing to 50 % (40 °C), non condensing
Height above sea level [m] ≤ 2000
Protection housing / terminals IP 20 / IP 20

Tests / approvals

Approval UL: N001

Safety classification

MTTF [a] 212

Mechanical data

Housing materials plastics: PC GF20


Installation rail TH35 (to EN 60715)
Weight [kg] 0.238

Displays / operating elements

Display Power supply 1 green


Input pulses 1 yellow
Output 1 green (lights when the output relay is energised)
Enable signal 1 yellow

Electrical connection

Connection Unit: 4-pole terminal strips, pin separation 5.0 mm; connector: 4 poles with screw
connection; 9HCG4S
Wiring
01: DC Supply voltage (+)
02: DC Supply voltage (+)
03: DC Supply voltage (-)
04: DC Supply voltage (-)
05: DC Sensor supply (+)
06: sensor signal pnp
07: DC Sensor supply (-)
08: Enable signal pnp
13: supply transistor output (+)
14: transistor output pnp
15: common External supply (-)
16: n.c.
17: Relay (normally open)
18: Relay (common)
19: Relay (normally closed)
20: n.c.
21: AC Supply voltage (L) n.c. = not connected
22: AC Supply voltage (L)
23: AC Supply voltage (N)
24: AC Supply voltage (N)

Accessories

Accessories (included) Order no. E40173; connector: 4 poles with screw connection; (pack of 5)

Remarks

Pack quantity [piece] 1

ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — US
— DD0203 — 13.02.2015

2 of 2 3/30/2017 3:46 PM

You might also like