Flange Dimensions http://www.delvin.co.nz/flange.

asp

Phone 06 348 8172 238 Taupo Quay

Fax 06 348 8173 P.O.Box 142
Email [email protected] Wanganui, New Zealand
Home Products Library Specific Brand Contact Us Privacy
Size

Flange Bolt Thickness

Table PCD Bolts Hole Size
Diameter Size Grey Cast Iron Copper Alloy Cast / Forged Steel

13 1/2" / 343mm 11 3/4" / 298mm 8 3/4" 7/8" / 22mm 1 1/8" / 29mm 15/16" / 24mm 1 1/8" / 29mm
ANSI 125/150

15" / 381mm 13" / 330mm 12 7/8" 1" / 25mm 1 3/8" / 35mm 1 5/8" / 41mm
ANSI 300

16 1/2" / 419mm 13 3/4" / 349mm 12 1 1/8" 1 1/4" / 32mm 2 3/16" / 56mm

ANSI 600

18 1/2" / 470mm 15 1/2" / 394mm 12 1 3/8" 1 1/2" / 38mm 2 1/2" / 64mm

ANSI 900

19" / 483mm 15 1/2" / 394mm 12 1 5/8" 1 3/4" / 44mm 3 5/8" / 92mm

ANSI 1500

335mm 292mm 8 16mm 18mm 25mm 25mm 19mm

AS2129 Table C

335mm 292mm 8 16mm 18mm 22mm 19mm 19mm

AS2129 Table D

335mm 292mm 8 19mm 22mm 25mm 19mm 19mm

AS2129 Table E

370mm 324mm 12 19mm 22mm 29mm 25mm 25mm

AS2129 Table F

370mm 324mm 12 19mm 22mm 38mm 32mm 32mm

AS2129 Table H

370mm 324mm 12 22mm 26mm 41mm 41mm

AS2129 Table J

13 1/4" / 337mm 11 1/2" / 292mm 8 5/8" 11/16" / 17mm 7/8" / 22mm 3/4" / 19mm 3/4" / 19mm
BS10 Table D

13 1/4" / 337mm 11 1/2" / 292mm 8 3/4" 7/8" / 22mm 1" / 25mm 3/4" / 19mm 3/4" / 19mm
BS10 Table E

14 1/2" / 368mm 12 3/4" / 324mm 12 3/4" 7/8" / 22mm 1 1/8" / 29mm 1" / 25mm 1" / 25mm
BS10 Table F

14 1/2" / 368mm 12 3/4" / 324mm 12 3/4" 7/8" / 22mm 1 1/2" / 38mm 1 1/4" / 32mm 1 1/4" / 32mm
BS10 Table H

14 1/2" / 368mm 12 3/4" / 324mm 12 7/8" 1" / 25mm 1 5/8" / 41mm 1 5/8" / 41mm
BS10 Table J

14 1/2" / 368mm 12 1/2" / 318mm 12 1" 1 1/8" / 29mm 1 7/8" / 48mm 1 7/8" / 48mm
BS10 Table K

320mm 280mm 8 M16 18mm 22mm

BS4504-6

340mm 295mm 8 M20 22mm 26mm

BS4504-10

340mm 295mm 12 M20 22mm 30mm 24mm

BS4504-16

360mm 310mm 12 M24 26mm 34mm 30mm

BS4504-25

375mm 320mm 12 M27 30mm 34mm

BS4504-40

415mm 345mm 12 M33 36mm 42mm

BS4504-64

430mm 360mm 12 M33 36mm 52mm

BS4504-100

Notes:

½" DN15 6" DN150

¾" DN20 8" DN200
DN stands for 'Diameter Nominale'. 1" DN25 10" DN250

Put simply, it is a rough translation of 1¼" DN32 12" DN300

mm from imperial sizes, assuming 1½" DN40 14" DN350
What is DN?
that an inch is 25mm. 2" DN50 15" DN375

We refer to a 12" flange as DN300, 2½" DN65 16" DN400

when in fact it is 304mm. 3" DN80 18" DN450
4" DN100 20" DN500
5" DN125 24" DN600
What is the PCD?
The PCD of a flange is one of the critical dimensions.
PCD (Pitch Circle Diameter) is the diameter of a circle that goes
through each of the bolt holes.

1 of 2 2/3/2010 9:08 AM
Flange Dimensions http://www.delvin.co.nz/flange.asp

There are several standards for flanges, and we deal with four of them;
Table D
Table E
Table F Table E is the most popular for applications with
British Standard - BS10 Table G water.
Table H All dimensions are specified in inches.
Table J
Table K
Table C
Table D These flanges are equivalent to the BS10 flanges,
Table E except that all dimensions are specified in mm.
Australian Standard -
Table F
AS2129 Table G
In some sizes, bolt holes are slightly larger to
give better clearance.
Table H
Table J
ANSI 125 Higher numbers denote higher pressures.
American National ANSI 150 Sometimes people use the word 'Class' instead of
Standards Institute ANSI 300 ANSI. e.g. an ANSI 150 flange might be called a
ANSI 600 'Class 150'
(ANSI)
ANSI 900
ANSI 1500 All dimensions are specified in inches.

BS4504-6 PN6 Engineers use the prefix PN (Pressure Nominale).

BS4504-10 PN10 e.g. a BA4504-16 flange will commonly be
British Standard - BS4504-16 PN16 referred to as a PN16
BS4504-25 PN25
BS4504 Generally, a PN16 flange is designed to withstand
BS4504-40 PN40 pressures up to 16 bar.
BS4504-64 PN64
BS4504-100 PN100 All dimensions are specified in mm.

2 of 2 2/3/2010 9:08 AM