Scribd
Upload
126 views2 pages

How To Collect SPCollects Via Unisphere (DOC-10588)

This document provides steps to collect SPCollects from a CLARiiON array via Unisphere: 1. Log into the CLARiiON array using Unisphere and select the array from the dashboard 2. Select the "Generate Diagnostic Files" task from the SPA/SPB tasks panel to start the SPCollect script 3. Monitor the file list and refresh until a .zip file appears, then select and transfer it to a local destination folder.

Uploaded by

Adrian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
126 views2 pages

How To Collect SPCollects Via Unisphere (DOC-10588)

This document provides steps to collect SPCollects from a CLARiiON array via Unisphere: 1. Log into the CLARiiON array using Unisphere and select the array from the dashboard 2. Select the "Generate Diagnostic Files" task from the SPA/SPB tasks panel to start the SPCollect script 3. Monitor the file list and refresh until a .zip file appears, then select and transfer it to a local destination folder.

Uploaded by

Adrian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

How to Collect SPCollects via Unisphere

Product:

CLARiiON

Unisphere Service Manager

Description:

How to Collect SPCollects via Unisphere

Resolution:

To collect the SPCollects via the Unishere GUI, follow these steps:

1. Log in to the CLARiiON via Unisphere.


2. On the Dashboard screen, select the CLARiiON system you wish to generate SPCollects from.
3. On the System Information screen there is a Task panel containing SPA Tasks and SPB Tasks.
4. To generate SPCollects for SPA:
1. Select Generate Diagnostic Files from the SPA Tasks panel.
2. A confirmation window will appear, select Yes to start the SPCollect script now.
3. Click OK to confirm the task successfully starts.
5. The SPCollect script may take several minutes to complete. To verify the SPCollect creation for SPA:
1. Select Get Diagnostic Files from the SPA Tasks panel.
2. The SPA File Transfer Manager window will appear.
3. Enlarge the SPA File Transfer Manager window and resize the Files On SP panel for easier
browsing.
4. Click twice on the Date column in the Files On SP panel to show the most recently created files
first. Enlarge the Name column so that the full file names can be read.
5. If the SPCollect script is still running, you will see a file of the format {SERIAL NO}_SPx_YYYY-
MM-DD_HH_MM_SS_runlog.txt which corresponds to the array serial number, SP id and the
date and time (GMT) that the SPCollect script was started on the SP.
6. Wait a few minutes and click on Refresh to update the Files On SP display.

Generated by Jive on 2015-02-12-08:00


1
How to Collect SPCollects via Unisphere

7. When the SPCollect script has completed the Files On SP panel


will show a file of the format {SERIAL NO}_SPx_YYYY-MM-
DD_HH_MM_SS_xxxxx_data.zip which corresponds to the array serial
number, SP id and the date and time (GMT) that the SPCollect script was
started on the SP.
6. To retrieve the SPCollects from SPA:
1. In the SPA File Transfer Manager window from step 5 above, click on the required SPCollect zip
file in the Files On SP panel.
2. In the Destination Directory panel, select the destination directory on the local host that the
SPCollect should be transferred to.
3. Click on the Transfer button at the bottom of the File On SP panel to begin the file transfer
operation.
4. A confirmation window will appear, select Yes to start the transfer operation.
5. The Transfer Status panel will report the results of the file transfer operation.
6. Click OK to close the SPA File Transfer Manager window and return the System Management
screen.
7. Repeat Steps 4 to 6 to generate and retrieve SPCollects for SPB.

Generated by Jive on 2015-02-12-08:00


2

You might also like