Datasheet: uni SNB M2 20%

EN

Plastic Modular Belt

Series uni SNB Type M2 20%
Straight running belt
Nominal pitch: 25.4 mm (1.00 in)
P Surface type: Flat
Surface opening: 20%

STANDARD
Backflex radius: 30.0 mm (1.20 in)
T
ectio
n Pin diameter: 5.0 mm (0.20 in)
dir
ing L
nn
Ru

Belt material mm in mm in
& color POM-D B PP B PP W PE N PE B
P
25.4 1.00 L 4.4 0.17
(Nominal)

Pin material
& color PP B PP W PE N T 8.8 0.35 - - -

STRAIGHT RUNNING
Non standard material and color: See uni Material and Color Overview.

Alternative pin and lock materials: Lockpin: PBT LG PA6.6 D N PP B W PE N

Permissible tensile force Belt weight Number of wear

(Belt/pin material) (Belt/pin material) *Min. No. strips (Min. No.)
Belt width drive
POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 sprocket **Carry **Return
per shaft (pcs) (pcs)
mm in N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft kg/m lb/ft

77 3.0 1810 407 1155 260 770 173 0.5 0.33 0.3 0.22 0.3 0.23 2 2 2

153 6.0 3596 808 2295 516 1530 344 1.0 0.65 0.7 0.44 0.7 0.45 2 2 2

191 7.5 4489 1009 2865 644 1910 429 1.2 0.81 0.8 0.55 0.8 0.56 2 2 2

PITCH 25.4 MM/1.00 IN

229 9.0 5382 1210 3435 772 2290 515 1.4 0.97 1.0 0.66 1.0 0.68 2 2 2

305 12.0 7168 1611 4575 1028 3050 686 1.9 1.29 1.3 0.88 1.3 0.90 3 3 2

381 15.0 8954 2013 5715 1285 3810 856 2.4 1.61 1.6 1.10 1.7 1.13 3 3 2

457 18.0 10740 2414 6855 1541 4570 1027 2.9 1.93 2.0 1.32 2.0 1.35 4 4 2

533 21.0 12526 2816 7995 1797 5330 1198 3.4 2.26 2.3 1.54 2.3 1.58 4 4 2

609 24.0 14312 3217 9135 2054 6090 1369 3.8 2.58 2.6 1.76 2.7 1.80 5 5 3

685 27.0 16098 3619 10275 2310 6850 1540 4.3 2.90 2.9 1.98 3.0 2.03 5 5 3

761 30.0 17884 4020 11415 2566 7610 1711 4.8 3.22 3.3 2.20 3.3 2.25 6 6 3

837 33.0 19670 4422 12555 2822 8370 1882 5.3 3.54 3.6 2.42 3.7 2.48 6 6 3

913 35.9 21456 4823 13695 3079 9130 2052 5.8 3.87 3.9 2.64 4.0 2.70 7 7 4
Additional standard belt widths are available in steps of 76.1 mm (3.00 in). Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in).

1978 77.9 46483 10449 29670 6670 19780 4447 12.5 8.37 8.5 5.72 8.7 5.85 14 14 7
Additional standard belt widths are available in steps of 76.1 mm (3.00 in). Additional non-standard belt widths are available in steps of 12.7 mm (0.50 in).

2967 116.8 69725 15674 44505 10005 29670 6670 18.7 12.56 12.8 8.57 13.1 8.77 20 20 10
General belt tolerance is +0/-0.4% at 23°C/73°F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request.
*Max. Load per Drive Sprocket. Belt material: POM-D 1400 N (315 lbf), PP 1100 N (247 lbf), PE 1100 N (247 lbf).
**Max. Spacing between wear strips, Carry: 152.0 mm (6.00 in); Return: 304.0 mm (12.00 in).
= Single Link
Datasheet: uni SNB M2 20%

Accessories
Rubber Top

A
B

K600

C B

K750

Belt Rubber A B C Link Width

Type
material & color material & color mm in mm in mm in size mm in

K300 77.0 3.00

PP B 03 K
M2 20%
7.5 0.30 3.4 0.13 36.0 1.41 K600 152.4 6.00
Flat
PP W 03 N K750 190.5 7.50

Accessories
Flight

Running direction

Front side: Flat

Back side: Non Stick

Flight H Width
Type Link size
Material & color mm in mm in

PE N B 5.0 0.20

M2 20% 25.4 1.00

PP-I W B K600 151.1 5.99
Flat/Non Stick 50.8 2.00
PE-I N B
76.2 3.00
101.6 4.00
Flights on 25.4 mm (1.00 in) are cut down from 50.8 mm (2.00 in).

Accessories
Tab / Single Link Only

V A
B
Z

Tab V Z A B Width
Type Link size
Material & color mm in mm in mm in mm in mm in
M2 20%
Bottom PP B 7.50 0.29 15.0 0.59 33.5 1.19 42.7 1.68 K750 189.4 7.46
Guide
Non Standard material and color: See uni Material and Color Overview.
 Datasheet: uni SNB M2 20%

Accessories
Rollers NON STANDARD
A
B

C D E

Drawing will
be updated

Roller A B C D E
Type
material & color mm in mm in mm in mm in mm in

Plastic POM-D W 5.7 0.22 13.5 0.53 44.6 1.75 50.8 2.00 51.0 2.01

Non Standard material and color: See uni Material and Color Overview.

Accessories
AmFlight

Running direction
H1

H2
H

H H1 H2
Type Material & color
mm in mm in mm in

Push PE W 17.0 0.67 17.0 0.67 14.4 0.57

Other Non Standard option: See uni AmFlight Overview.

mm in
W (Belt width)

A C B
A min 38.3 1.51

B min 32.1 1.26

Running direction

C 18.0 0.71

PI max W - 106.4 W - 4.19

PI min 33.2 1.31

PI
Increment: 12.7 mm (0.50 in).
Datasheet: uni SNB M2 20%

Sprocket

Double row/Two way

Single row/Two way

PA6 LG
A-dimen-
Bore size

diameter

diameter

diameter

B-dimen-

Machined PA6 N
Overall

Pitch-

Hub-

sion

sion
No. of teeth

0.75

1.00

1.25
1.50

2.50
0.78
0.98

1.18

1.57
2.36

3.54
in
Pilot Bore

Molded
20.0
25.0

30.0

40.0

90.0
19.1

25.4

31.8
38.1

60.0
63.5
mm

mm in mm in mm in mm in mm in

Z10 x 86.0 3.39 82.2 3.24 65.0 2.56 34.7 1.37 45.5 1.79 x x

Z12 x 103.2 4.06 98.1 3.86 65.0 2.56 43.0 1.69 53.5 2.11 x x

Z18 x 151.9 5.98 146.3 5.76 65.0 2.56 67.6 2.66 77.6 3.06 x x

Z18 x 151.9 5.98 146.3 5.76 120.0 4.72 67.6 2.66 77.6 3.06 x x

Z19 x 160.0 6.30 154.3 6.07 65.0 2.56 71.7 2.82 81.6 3.21 x x

Z19 x 160.0 6.30 154.3 6.07 120.0 4.72 71.7 2.82 81.6 3.21 x x

Z20 x 168.2 6.62 162.4 6.39 65.0 2.56 75.8 2.98 85.6 3.37 x x

Z20 x 168.2 6.62 162.4 6.39 120.0 4.72 75.8 2.98 85.6 3.37 x x

Non standard material

Molded sprocket Molded sprocket and color: See uni
Material and Color
Overview.

Other sprocket sizes are available upon request.

Two-part sprocket are available upon request.
Round bores are always delivered with keyway.
Other bore sizes are available upon request.
uni Retainer Rings: See uni Retainer Ring data sheet.
Width of tooth = 6.0 mm (0.24 in)
Width of sprocket = 25.0 mm (0.98 in)
uni SNB M2 20%/170524

Max load per sprocket shown does not take bore size into account.
Please also ensure that sufficient size shaft is chosen for corresponding load.

For correct sprocket position: See uni Assembly Instructions for uni SNB.
For more detailed sprocket information, contact Customer Service.

Expert advice, quality solutions Ammeraal Beltech Modular A/S

Transmission Belts
Conveyor Belts

Seamless Belts

and local service Hjulmagervej 21

Modular Belts

Timing Belts

Fabrication

for all your belting needs DK-7100 Vejle

& service

www.ammeraalbeltech.com
T +45 7572 3100
This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect F +45 7572 3348
use of the above stated information. This information replaces previous information. All activities performed and services rendered by [email protected]
Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. www.unichains.com