GENERATION OF

COMPUTERS

Vishal Dalor 1471772018

The computer has evolved from a large—sized simple calculating machine to a smaller but much
more powerful machine. The evolution of computer to the current state is defined in terms of the
generations of computer. Each generation of computer is designed based on a new technological
development, resulting in better, cheaper and smaller computers that are more powerful, faster
and efficient than their predecessors. Currently, there are five generations of computer. In the
following subsections, we will discuss the generations of computer in terms of—
1. the technology used by them (hardware and software),
2. computing characteristics (speed, i.e., number of instructions executed per second),
3. physical appearance, and
4. their applications.
First Generation (1940 to 1956): Using Vacuum
Tubes
Hardware Technology The first generation of computers used vacuum tubes
for circuitry and magnetic drums for memory. The input to the computer was through
punched cards and paper tapes. The output was displayed as printouts.

Software Technology The instructions were written in machine language. Machine

language uses 0s and 1s for coding of the instructions. The first generation computers
could solve one problem at a time.

Computing Characteristics The computation time was in milliseconds.

Physical Appearance These computers were enormous in size and required a large
room for installation.

Application They were used for scientific applications as they were the fastest
computing Device.
Examples UNIVersal Automatic Computer (UNIVAC), Electronic Numerical Integrator
And Calculator (ENIAC), and Electronic Discrete Variable Automatic Computer
(EDVAC).

The first generation computers used a large number of vacuum tubes and thus generated a lot of
heat. They consumed a great deal of electricity and were expensive to operate. The machines
were prone to frequent malfunctioning and required constant maintenance. Since first generation
computers used machine language, they were difficult to program.

A UNIVAC computer at the Census

Bureau.
Second Generation (1956 to 1963): Using Transistors
Hardware Technology Transistors replaced the vacuum tubes of the first
generation of computers. Transistors allowed computers to become smaller, faster,
cheaper, energy efficient and reliable. The second generation computers used magnetic
core technology for primary memory. They used magnetic tapes and magnetic disks for
secondary storage. The input was still through punched cards and the output using
printouts. They used the concept of a stored program, where instructions were stored in
the memory of computer.

Software Technology The instructions were written using the assembly language. Assembly language uses
mnemonics like ADD for addition and SUB for subtraction for coding of the instructions. It is easier to write
instructions in assembly language, as compared to writing instructions in machine language. High-level
programming languages, such as early versions of COBOL and FORTRAN were also developed during
this period.
Computing Characteristics The computation time was in microseconds.
Physical Appearance Transistors are smaller in size compared to vacuum tubes, thus, the size of the computer
was also reduced.
Application The cost of commercial production of these computers was very high,though less than the first
generation computers. The transistors had to be assembled manually in second generation computers.
Examples PDP-8, IBM 1401 and CDC 1604.

Second generation computers generated a lot of heat but much less than the first generation
computers. They required less maintenance than the first generation computers.
Third Generation (1964 to 1971): Using Integrated
Circuits
Hardware Technology The third generation computers used the Integrated Circuit (IC)
chips.In an IC chip, multiple transistors are placed on a
silicon chip. Silicon is a type of semiconductor. The use of IC chip increased the speed
and the efficiency of computer, manifold. The keyboard and monitor were used to
interact with the third generation computer, instead of the punched card and printouts.

Software Technology The keyboard and the monitor were interfaced through the operating system. Operating
system allowed different applications to run at the same time. High-level languages were used extensively for
programming, instead of machine language and assembly language.
Computing Characteristics The computation time was in nanoseconds.
Physical Appearance The size of these computers was quite small compared to the second generation
computers.
Application Computers became accessible to mass audience. Computers were produced
commercially, and were smaller and cheaper than their predecessors.
Examples IBM 370, PDP
The third generation computers used less power and generated less heat than the second
generation computers. The cost of the computer reduced significantly, as individual components
of the computer were not required to be assembled manually. The maintenance cost of the
computers was also less compared to their predecessors.
Fourth Generation (1971 to present): Using
Microprocessors
Hardware Technology They use the Large Scale Integration (LSI) and the Very Large Scale Integration (VLSI)
technology. Thousands of transistors are integrated on a small silicon chip using LSI technology. VLSI allows
hundreds of thousands of components to be integrated in a small chip. This era is marked by the development of
microprocessor. Microprocessor is a chip containing millions of transistors and components, and,
designed using LSI and VLSI technology. This generation of computers gave rise to Personal Computer (PC).
Semiconductor memory replaced the earlier magnetic core memory, resulting in fast random access to
memory. Secondary storage device like magnetic disks became smaller in physical size and larger in capacity
The linking of computers is another key development of this era.The computers were linked to form networks that
led to the emergence of the Internet.This generation also saw the development of pointing devices like mouse,
and handheld devices.
Software Technology Several new operating systems like the MS-DOS and MS- Windows developed during this
time. This generation of computers supported Graphical User Interface (GUI). GUI is a user-friendly interface that
allows user to interact with the computer via menus and icons. High-level programming languages are used for
the writing of programs.
Computing Characteristics The computation time is in picoseconds.
Physical Appearance They are smaller than the computers of the previous generation. Some can even fit into
the palm of the hand.
Application They became widely available for commercial purposes. Personal computers became available to
the home user.
Examples The Intel 4004 chip was the first microprocessor. The components of the computer like Central
Processing Unit (CPU) and memory were located on a single chip. In 1981, IBM introduced the first computer for
home use. In 1984, Apple introduced the Macintosh.

The microprocessor has resulted in the fourth generation

computers being smaller and cheaper
than their predecessors. The fourth generation computers are
also portable and more reliable.
They generate much lesser heat and require less
maintenance compared to their predecessors.
GUI and pointing devices facilitate easy use and learning on
the computer. Networking has
resulted in resource sharing and communication among
different computers.
Fifth Generation (Present and Next): Using Artificial
Intelligence
The goal of fifth generation computing is to develop computers that are capable of learning and self-organization.
The fifth generation computers use Super Large Scale Integrated (SLSI) chips
that are able to store millions of components on a single chip. These computers have large memory requirements.
This generation of computers uses parallel processing that allows several instructions to be executed in parallel
instead of serial execution. Parallel processing results in faster processing speed. The Intel dualcore
microprocessor uses parallel processing.

The fifth generation computers are based on Artificial

Intelligence (AI). They try to simulate the
human way of thinking and reasoning. Artificial Intelligence
includes areas like Expert System
(ES), Natural Language Processing (NLP), speech recognition,
voice recognition, robotics, etc.