Scribd Logo
Upload

Welcome to Scribd!

  • 117 views

    Btech 1 Sem Basic Electrical Engineering Ree 101 2018 19

    Uploaded by

    Shrey Sharma
    This document is a question paper for a Basic Electrical Engineering exam consisting of 7 sections with multiple choice and numerical problems. Some of the key topics covered include: - Linear and non-linear circuits, ideal voltage and current sources, 3-phase systems, quality factor of series resonance circuits, RMS and maximum values of a current wave, torque-slip characteristics of induction motors, and magnetic hysteresis. - Star-delta conversions, current calculations using superposition theorem, power calculations for a 3-phase balanced load, analogies between magnetic and electric circuits, and workings of 3-phase synchronous motors. - Form and peak factors of waveforms, cut-off frequencies and bandwidth of series resonance circuits, construction

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Btech 1 Sem Basic Electrical Engineering Ree 101 2018 19

    Uploaded by

    Shrey Sharma
    117 views2 pages
    This document is a question paper for a Basic Electrical Engineering exam consisting of 7 sections with multiple choice and numerical problems. Some of the key topics covered include: - Linear and non-linear circuits, ideal voltage and current sources, 3-phase systems, quality factor of series resonance circuits, RMS and maximum values of a current wave, torque-slip characteristics of induction motors, and magnetic hysteresis. - Star-delta conversions, current calculations using superposition theorem, power calculations for a 3-phase balanced load, analogies between magnetic and electric circuits, and workings of 3-phase synchronous motors. - Form and peak factors of waveforms, cut-off frequencies and bandwidth of series resonance circuits, construction

    Original Description:

    Electrical

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a question paper for a Basic Electrical Engineering exam consisting of 7 sections with multiple choice and numerical problems. Some of the key topics covered include: - Linear and non-linear circuits, ideal voltage and current sources, 3-phase systems, quality factor of series resonance circuits, RMS and maximum values of a current wave, torque-slip characteristics of induction motors, and magnetic hysteresis. - Star-delta conversions, current calculations using superposition theorem, power calculations for a 3-phase balanced load, analogies between magnetic and electric circuits, and workings of 3-phase synchronous motors. - Form and peak factors of waveforms, cut-off frequencies and bandwidth of series resonance circuits, construction

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    117 views2 pages

    Btech 1 Sem Basic Electrical Engineering Ree 101 2018 19

    Uploaded by

    Shrey Sharma
    This document is a question paper for a Basic Electrical Engineering exam consisting of 7 sections with multiple choice and numerical problems. Some of the key topics covered include: - Linear and non-linear circuits, ideal voltage and current sources, 3-phase systems, quality factor of series resonance circuits, RMS and maximum values of a current wave, torque-slip characteristics of induction motors, and magnetic hysteresis. - Star-delta conversions, current calculations using superposition theorem, power calculations for a 3-phase balanced load, analogies between magnetic and electric circuits, and workings of 3-phase synchronous motors. - Form and peak factors of waveforms, cut-off frequencies and bandwidth of series resonance circuits, construction

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Printed pages: 02 Sub Code: REE101

    120102
    Paper Id: 120101 Roll No.
    B TECH
    (SEM I) THEORY EXAMINATION 2018-19
    BASIC ELECTRICAL ENGINEERING
    Time: 3 Hours Total Marks: 70
    Note: 1. Attempt all Sections. If require any missing data; then choose suitably.

    SECTION A
    1. Attempt all questions in brief. 2 x 7 = 14
    a. Explain linear and non linear circuit.
    b. Explain ideal voltage and current source with example.
    c. Give the advantages and disadvantages of 3-phase system.
    d. Explain Quality factor of series resonance circuit.
    e. A current wave is represented by the equation i = 20 sin (251t). Calculate the
    maximum and RMS value of the current and its frequency.
    f. Draw and explain torque slip characteristic of three phase induction motor.
    g. What do you mean by magnetic hysteresis?

    SECTION B
    2. Attempt any three of the following: 7 x 3 = 21
    a. Derive the relation for Star to delta conversion.

    b. Using superposition theorem find current in 40 ohm resistance.

    c. A star connected balanced load is supplied from a three phase balanced supply
    with a line voltage of 416 V at a frequency of 50 Hz. Each phase of load
    consists of a resistance and a capacitor joined in series and the reading on two
    wattmeters connected to measure the total power supplied are 782 watt and
    1980 watt, both positive. Calculate (a) the power factor of the circuit (b) the
    line current and (c) the capacitance of each capacitor.

    d. Give the analogy between magnetic circuit and electric circuit.


    e. Explain construction and working principle of three phase synchronous motor.
    SECTION C
    3. Attempt any one part of the following: 7x1=7
    (a) Find the form factor and Peak factor of the given waveform.

    (b) Find current delivered by the voltage source mesh analysis.

    4. Attempt any one part of the following: 7x1=7


    (a) Derive the relation for cut off frequencies and bandwidth of a series resonance
    circuit.
    (b) Explain maximum power transfer theorem and find the value of load resistance
    and amount of power transferred.

    5. Attempt any one part of the following: 7x1=7


    (a) Explain construction and working of dynamometer type wattmeter with its
    merits and demerits.
    (b) What is the necessity of a three phase system? Derive the relation between line
    values and phase values of a three phase star and delta connected system.

    6. Attempt any one part of the following: 7x1=7


    (a) Explain working of a single phase transformer and derive the e.m.f. equation.
    Why the rating of transformer is in KVA.
    (b) In a 50 KVA, 1100/220 V transformer, the iron and copper losses at full load
    are 350 W and 425 W respectively. Calculate the efficiency at (i) full load and
    half load unity power factor (ii) full load 0.8 Power factor (iii) maximum
    efficiency and load at which maximum efficiency occurs assuming the load to
    be resistive.

    7. Attempt any one part of the following: 7x1=7


    (a) Explain different types of dc motor and give their characteristic.
    (b) Explain efficiency of a three phase induction motor and derive the condition for
    maximum efficiency.

    You might also like