Scribd
Upload
131 views3 pages

Gear Engineering: Code: MEMD1T6B

This document contains 8 questions related to gear engineering for a machine design exam. The questions cover topics such as backlash, standard gear tooth shapes, spur gear design, helical gear design, bevel gear design, worm gear design, gear noise, pre-selective gear boxes, and optimization of gear trains. Students are asked to answer any 5 of the 8 questions, which range from 4 to 14 marks each.

Uploaded by

Kyro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
131 views3 pages

Gear Engineering: Code: MEMD1T6B

This document contains 8 questions related to gear engineering for a machine design exam. The questions cover topics such as backlash, standard gear tooth shapes, spur gear design, helical gear design, bevel gear design, worm gear design, gear noise, pre-selective gear boxes, and optimization of gear trains. Students are asked to answer any 5 of the 8 questions, which range from 4 to 14 marks each.

Uploaded by

Kyro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

PVP 12

Code: MEMD1T6B

I M.Tech - I Semester – Regular/Supplementary Examinations –


January - 2017

GEAR ENGINEERING
(MACHINE DESIGN)

Duration: 3 hours Max. Marks: 70


Answer any FIVE questions. All questions carry equal marks

1. a) What is backlash in gear teeth? What factors influence the


backlash in gear teeth? 7M

b) What are different standard systems for the shape of gear


teeth? Explain them. 7M

2. a) What is meant by equivalent spur gear? 4M

b) Design a spur gear drive to transmit 22kW at 900rpm,


speed reduction is 2.5m materials for pinion and wheel are
C15 steel and cast iron grade 300 respectively. Take
pressure angle of 20ᵒ and working life of the spur gears as
10,000 hrs. 10 M

3. A pair of helical gears have 200 stub teeth in diameters plane


and helix angle is 450. The power to be transmitted is
20kW. The pinion rotates at 5000rpm and has 30teeth.The

Page 1 of 3
gear ratio is 5. The material for gears is steel with safe
bending stress of 110MPa. Design A helical gear system
with suitable assumed data. 14 M

4. a) Explain the tooth loads in bevel gears and their


significance in the selection of bearing and design of shaft.
6M

b) Face width is 1/3rd of slant length. Velocity factor is .


Find modulate, face width, pinion chic, gear die. Check the
design for dynamic load and wear. C = 300kN/m. If the
mean plan of the gear is 120mm from the left hand bearing,
determine the forces on the bearings and estimate the
diameter of the shaft. 8M

5. a) Why is the center distance an important parameter in the


design of worm and worm gear? 6M

b) A worm drive transmits 15kW at 2000rpm to a machine


carriage at 75rpm. The worm is triple threaded and has
65mm pitch diameter. The worm gear has 90 teeth of 6mm
module. The tooth form is to be 20ᵒ full depth involute. The
coefficient of friction between the rating teeth may be taken
as 0.1 calculate: 8M
i) Tangential force acting on the worm.
ii) Axial thrust and separating force on worm
iii) Efficiency of the worm drive.
Page 2 of 3
6. a) What are the different types of problems faced while using
gears? Explain them briefly. 7M

b) What is Gear noise? How it effects the gear system? 7M

7. a) Describe the function of a pre-selective gear box of an


automobile. 7M

b) Explain the procedure to analyse an epicyclic gear train.


7M

8. a) What are the applications of traditional and non traditional


optimization techniques. 7M

b) Formulate the gear train problem in which number of teeths


of gear are assumed to be known and face width of gears
are assumed as decision variables. Take minimization of
total weight of gear train as objective. 7M

Page 3 of 3

You might also like