Katalog OffGrid EN Web PDF

ENGLISH
PV OFF GRID
BATTERY CHARGING SYSTEMS
Taking control for you.
1
Content
Innovative Electronics Company 4
PV Off Grid 6
Solar charge controllers | Basic 12
Solar charge controllers | Classic 18
Solar charge controllers | Advanced 26
Sine wave inverters 32
DC loads 42
Accessories 48
Solar home systems 56
Night light systems 60
Inverter systems 64
Mini-grid | Hybrid systems 68
Battery charging systems 76
Steca | EMS Provider 86
Steca | International network 88
Steca
STRONG SOLUTIONS
POWERFUL PARTNERS
2 3
Having posted sustained growth as an innovated electronic company,
we pool many years of experience and innovative strength both as a
manufacturer of Steca-branded product lines in solar electronics and as an
Innovative
Electronics
electronics service provider.
Nowadays, we are highly diversified as an electronics service provider

and supply our partners around the globe. We carry out our production
COMPANY
operations on an area measuring over 29,000 square metres with more than
750 employees. Our plant at the Memmingen site and a plant in Bulgaria
ensure your product’s success.
As part of the PRIMEPULSE Group, Steca has an international network and

a firm foundation for strategic growth.
4 5
Steca
PV OFF GRID
6 7
GENERAL RECOMMENDATIONS SELECTING THE SOLAR CHARGE CONTROLLER
selecting the solar controller
Basic solar charge controllers
The solar charge controller is the central component in a stand-alone system.

It controls the energy flow in the entire system and determines the system
function and service life. This means that a suitable solar charge controller
must be selected carefully.
The solar charge controller only accounts for between 3 % and 5 % of the total
cost of a stand-alone system, and yet it is the most important component. Steca Solsum F Steca Solarix PRS Steca Solsum Steca Solarix MPPT
A high-quality, reliable solar charge controller in a higher price class pays for
48
itself very quickly, as it increases the battery life and thus leads to a significant
saving in system costs.
24
Selecting the topology User interface 12

Steca solar charge controllers are available as professional hybrid-shunt If the solar charge controller is used in an application where persons have UBatt [V]
0 10 20 30 40 IModul [A]
controllers, serial charge controllers or MPP trackers. A suitable topology access to the system, it is important that the controller is equipped with a
should be selected depending on the requirements of the application. large LCD screen for displaying the operating statuses using symbols. The
solar charge controller should be equipped with an integrated energy meter
Switch charge controllers such as shunt and serial charge controllers can for notifying the user of the system and its operation.
only be used on 12 V systems in connection with 36-cell solar modules. On On pure technical systems (such as night-light systems), a solar charge Classic solar charge controllers
24 V or 48 V systems, two 36-cell solar modules (24 V) or two 72-cell solar controller with a simple LED display is sufficient.
modules (48 V) must be wired serially as a string.
Cables and design
Serial charge controllers are well suited to small applications and solar home In order to ensure a long service life, it is important to use a robust solar
systems. Shunt controllers are recommended for larger-scale applications charge controller with short, thick cables for connecting it to the battery.
and hybrid systems, as these have a lower power loss during charging. The device should always be screwed to a non-flammable wall directly above
the battery. It is important that there is enough free space around the solar Steca PR Steca Solarix Steca PR 2020 IP Steca Solarix Steca Solarix MPPT 3020
Due to their good electromagnetic compatibility, shunt controllers are also charge controller so that it can be cooled sufficiently by the ambient air. The 2020-x2
Steca Solarix MPPT 5020
recommended for use in telecommunication applications. guidelines in the instruction manuals must be adhered to in all cases.
48
A solar charge controller with MPP tracking must be used when solar
modules which are not comprised of 36 or 72 cells are used. These include Additional functions
most optimised solar modules for grid-connected systems and all thin-film It makes sense to use solar charge controllers with additional functions in
modules. applications with stand-alone inverters or hybrid systems. The possibility 24
of connecting to the stand-alone inverters for communication and

The use of an MPP tracker is also increasingly recommended depending on synchronisation of the devices is a requirement for effective inverter systems 12
the coldness of the average annual temperature and importance of efficient or hybrid systems. Special energy management functions remain of key UBatt [V]
10 20 30 40 50 IModul [A]
charging at low battery charges (even when standard 36-cell modules importance on hybrid systems.
are used).
Dimensioning the solar charge controller

The short-circuit current (Isc) of the solar module is decisive when dimensioning Advanced solar charge controllers
solar charge controllers (under standard test conditions). Steca recommends
always dimensioning the solar charge controller generously. The rated current
on the solar charge controller should be approximately 20 % higher than the
total short-circuit current on all connected solar modules.
Steca Tarom Steca Tarom MPPT Steca Power Tarom
48
24
12
UBatt [V]
0 10 50 100 150 IModul [A]
8 9
GENERAL RECOMMENDATIONS STECALINK BUS: THE NEW COMMUNICATION SYSTEM
for Steca solar charge controllers
for alternating current and hybrid systems
Sine wave inverters Selecting the battery

In contrast to so-called square wave or trapezoidalinverters (grey square In order to also be able to supply loads with high requirements with-
curve), Steca sine wave inverters produce a real and precisely controlled sine out any problems, the size of the battery must be chosen with care. Some
wave (red sine wave) at their output. The sine wave inverters assure that all critical loads such as fridges, freezers, pumps and motors need extremely
loads which are suitable for grid operation can also be operated on a solar high starting currents in their start-up phases. In order to be able to power
home system without any problems. Furthermore, they offer the advantage such loads, it is important to use a high-performance inverter with a high
that no significant noises are produced in the inverter and there is no loud overload capacity, particularly in the start-up phase. The battery must also
background noise to be heard on a connected radio, for example. possess a large enough capacity so that sufficient currents are made available
to the inverter in the start-up phase. We recommend choosing the battery
size according to the following formula: the battery capacity should be at
least five times as large as the rated power of the inverter divided by the rated
voltage of the battery.
Sine wave
Cbatt ≥ 5 h * Pnom / Unom
Pnom is the rated power of the inverter in watts and

Square wave Unom is the rated voltage of the battery.
Communication between Steca Tarom MPPT 6000-M, Steca Tarom MPPT 6000-S, Steca Tarom 4545/4545-48 and Steca PA HS400
Pnom inverter Unom battery Battery capacity

200 W 12 V > 100 Ah
500 W 12 V > 200 Ah Steca offers an innovative, integrated RS-485 communication interface,
1,000 W 12 V > 400 Ah the StecaLink bus. Slave Tarom MPPT Tarom 4545 Solarix
PA HS400
Selecting an inverter 6000-S Tarom 4545-48 2020-x2
2,000 W 12 V > 800 Ah
Master
The power of the inverter must be selected according to the way it will be 2,000 W 24 V > 400 Ah This interface allows a charge controller to act as a communication master
used. The sum of the power of all loads must not exceed the rated power of 3,500 W 24 V > 700 Ah (e.g. Steca Tarom MPPT 6000-M) to exchange measurements and setting
the inverter. The maximum power of the inverter must be able to cover the 3,500 W 48 V > 350 Ah information with other devices (e.g. Tarom MPPT 6000-S, Steca Tarom Tarom MPPT
6000-M   
starting currents of the loads. 5,000 W 48 V > 500 Ah 4545/4545-48 and/or PA HS400). In the StecaLink communication system,
In order to allow the connection of more loads, S teca recommends overdi- the master collects all relevant data of the other controllers or electricity
7,000 W 48 V > 700 Ah
mensioning the inverter. sensors, to record them in the data logger. Optionally, it can also calculate
Tarom 4545
the battery‘s state of charge as a percentage (SOC). Tarom 4545- 
This ability to link multiple devices and their data creates a connected system 48
Selecting the PV generator and solar charge controller Selecting the system voltage which collects and records all information centrally. At the same time, it
The solar module array has to be adjusted to the local sunlight con- The power requirement of the loads should be the decisive factor when achieves a high level of redundancy.
ditions and the system‘s energy requirement. In order to avoid stag- choosing the system voltage. The higher the power, the higher the system An overview of the StecaLink bus communication options is shown in the PA LCD1 
nation times, the PV generator must also provide enough power during voltage. If no 12 V DC loads are connected to the system, a higher system table opposite.
months with little solar radiation in order to cover the requirement of the voltage of 24 V or 48 V should be chosen in order to reduce the alternating
connected loads. currents, and thus the losses on the DC side. Inverters also generally work
The chosen solar charge controller must also be suitable for the maximum more effectively with a higher input voltage. All in all, a higher system vol-
short-circuit current of the PV generator and the maximum load current. tage leads to the system having a greater efficiency, since losses are reduced
In some applications, however, technical properties also play an important Communication between Steca Solarix 2020-x2
role in the choice of solar charge controller. This may mean that a high- and Steca PA LCD1
performance solar charge controller with corresponding additional functions Cable lengths and cross sections
is used in a system with a low output. Direct currents in inverter systems are typically large. For this reason, it is A
In order to keep the initial investment small, we recommend planning the size important to dimension the cables between the battery and the inverter ap-
of the PV generator and battery according to the current energy consumpti- propriately. Always connect the inverter directly to the battery. The cable you
on and choosing a solar charge controller which will allow the system to be use should be as short as possible. In addition, the cable cross section should USB
Charger
USB
Charger The innovative dual battery charge controller Steca Solarix 2020-x2 with re-
B
expanded later. match the expected flow of current. In case of doubt, a thicker cable should mote display PA LCD1 is particularly appealing for leisure applications with
be chosen. This can have a significant influence on the overall behaviour of high demands around professional battery management and visual appea-
the system. Using thick and short cables can limit losses and thus allow you L rance in the visible part.
to create a system with a better level of efficiency and/or better performance. Numerous application options exist for the dual battery charge controller
If the cables on the direct current side of the inverter are included in the aside from the recreational market: any small to medium-sized stationary PV
+ - + -
delivery, these should not be lengthened, and a smaller cross section should system designed to charge two independent batteries via one module field
not be used. C C represents a potential application for the controller.
Key:
A Solar modul
B Solar charge controller
Steca Solarix 2020-x2
C Battery
L Loads
10 11
Steca
solar charge controlleRs |
BASIC
12 13
STECA SOLSUM F STECA SOLARIX PRS
6.6F | 8.8F | 10.10F 1010 | 1515 | 2020 | 3030
The Steca Solsum F-Line continues the huge success of one of the most The simplicity and high performance of the Steca Solarix PRS solar charge
used SHS controllers. With a power range of up to 10 A at automatically controller make it particularly appealing. At the same time, it offers a modern
recognized 12 V or 24 V it fits to a system sizes of maximum 240 W. design and a convenient display, all at an extremely attractive price.
Several LEDs in various colours give information on the battery‘s state of
Full circuit board protection with LED display for simple recognition of bat- charge. Here, Steca’s latest algorithms are employed, resulting in optimal
tery status. Various connections make it possible to connect easily to solar battery maintenance. The Solarix PRS charge controllers are equipped with
panels, battery and load. The Steca Solsum F works on PWM as a low loss an electronic fuse, thus making optimal protection possible. They operate on
series controller. the serial principle, and separate the solar module from the battery in order
to protect it against overcharging.
For larger projects, the charge controllers can also be equipped
with special functions: e.g. with night light function and selec-
NIGHT- STECA NIGHT- STECA
LIGHT Quality table charging plateau and deep-discharge protection voltages. LIGHT Quality
6 A...10 A 10 A...30 A
Product features Product features

∙∙ Serial topology with MOSFETs ∙∙ Serial topology with MOSFETs
∙∙ Automatic detection of voltage ∙∙ Automatic detection of voltage
30
45
∙∙ Voltage regulation ∙∙ Voltage regulation
145
∙∙ PWM control ø4 ∙∙ PWM control
4x 187
∙∙ Multistage charging technology ∙∙ Multistage charging technology
ø5
∙∙ Current compensated load disconnection ∙∙ Current compensated load disconnection 4x
∙∙ Automatic load reconnection ∙∙ Automatic load reconnection

∙∙ Temperature compensation ∙∙ Temperature compensation
100
87
∙∙ Negative earthing of one or positive earthing of several terminals ∙∙ Negative earthing of one or positive earthing of several terminals
96
60
possible possible
∙∙ Monthly equalisation charge ∙∙ Monthly equalisation charge
16
135 5
Electronic protection functions Electronic protection functions 177 5
∙∙ Overcharge protection ∙∙ Overcharge protection

∙∙ Deep discharge protection ∙∙ Deep discharge protection
1010 1515 2020 3030
∙∙ Reverse polarity protection of module (≤ 36 V), load and battery 6.6F 8.8F 10.10F ∙∙ Reverse polarity protection of module (≤ 36 V), load and battery
Characterisation of the operating performance
∙∙ Automatic electronic fuse Characterisation of the operating performance ∙∙ Automatic electronic fuse
System voltage 12 V (24 V)
∙∙ Short circuit protection of load and module System voltage 12 V (24 V) ∙∙ Short circuit protection of load and module
Own consumption < 4 mA
∙∙ Overvoltage protection at module input Own consumption < 4 mA ∙∙ Overvoltage protection at module input
DC input side
∙∙ Open circuit protection without battery DC input side ∙∙ Open circuit protection without battery
Open circuit voltage solar module < 47 V
∙∙ Reverse current protection at night Open circuit voltage solar module < 47 V ∙∙ Reverse current protection at night (at minimum operating temperature)
(at minimum operating temperature)
∙∙ Overtemperature and overload protection ∙∙ Overtemperature and overload protection Module current 10 A 15 A 20 A 30 A
Module current 6A 8A 10 A
∙∙ Load disconnection on battery overvoltage ∙∙ Load disconnection on battery overvoltage DC output side
DC output side
Load current** 10 A 15 A 20 A 30 A
Load current** 6A 8A 10 A
Displays Displays Reconnection voltage (LVR)* 12.4 V … 12.7 V (24.8 V … 25.4 V)
Reconnection voltage (LVR)* 12.4 V … 12.7 V
Deep discharge protection (LVD)* 11.2 V … 11.6 V (22.4 V … 23.2 V)
∙∙ Multifunction LED display (24.8 V … 25.4 V) ∙∙ Multifunction LED display
Deep discharge protection (LVD)* 11.2 V … 11.6 V Battery side
∙∙ Multi-coloured LED ∙∙ Multi-coloured LED
(22.4 V … 23.2 V) Battery voltage 9 V ... 17 V (17.1 V ... 34 V)
∙∙ 4 LEDs show operating states ∙∙ 5 LEDs show operating states
Battery side End of charge voltage* 13.9 V (27.8 V)
~~for operation, state of charge, fault messages ~~for operation, state of charge, fault messages
End of charge voltage* 13.9 V (27.8 V) Boost charge voltage* 14.4 V (28.8 V)
Boost charge voltage* 14.4 V (28.8 V) Equalisation charge* 14.7 V (29.4 V)
Options Set battery type* gel
Options
Set battery type* liquid
∙∙ Evening or night light function pre-set in the factory or adjustable via Operating conditions ∙∙ Evening or night light function pre-set in the factory or adjustable via Operating conditions
Steca PA RC 100 Ambient temperature -25 °C … +50 °C Steca PA RC 100 Ambient temperature -25 °C … +50 °C
∙∙ Parameterisation of function values via Steca PA RC 100 Fitting and construction
∙∙ Parameterisation of function values via Steca PA RC 100 Fitting and construction
Terminal (fine / single wire) 4 mm2 / 6 mm2 - AWG 12 / 9 Terminal (fine / single wire) 16 mm2 / 25 mm2 - AWG 6 / 4
Certificates Degree of protection IP 31 Certificates Degree of protection IP 31
∙∙ Compliant with European Standards (CE) Dimensions (X x Y x Z) 145 x 100 x 30 mm ∙∙ Compliant with European Standards (CE) Dimensions (X x Y x Z) 187 x 96 x 45 mm
∙∙ RoHS compliant Weight approx. 150 g ∙∙ RoHS compliant Weight 345 g
∙∙ Made in EU Technical data at 25 °C / 77 °F ∙∙ Made in EU Technical data at 25 °C / 77 °F
* adjustable via Steca PA RC100 * adjustable via Steca PA RC100
∙∙ Manufactured according to ISO 9001 and ISO 14001 ∙∙ Manufactured according to ISO 9001 and ISO 14001 ** Inverters must not be connected to the load output.
** Inverters must not be connected to the load output.
Steca accessories Steca accessories

∙∙ Remote control Steca PA RC100 ∙∙ Remote control Steca PA RC100
14 15
STECA SOLSUM STECA SOLARIX MPPT
2525 | 4040 1010 | 2010
Solar charge controllers Steca Solsum 2525 and 4040 are newly developed Steca Solarix MPPT is a solar charge controller with Maxi mum Power
products based on the internationally renowned controller family Solarix PRS. Point Tracking. It is specially designed to work with all established
With increased module and load current, the controllers are now also suita- module technologies and is optimized for solar systems with mo-
ble for even larger systems. The devices also feature an integrated USB char- dule voltages higher than the battery voltage. The Steca Sola-
ging port for charging smartphones and tablets. The controllers demonstrate rix MPPT is especially qualified in combination with grid tied so-
impressive performance, are simple to use and offer unbeatable value for lar modules. The advanced MPP-tracking algorithm from Steca
money. assures that the maximum available power of the solar generator is charged STECA
Several LEDs in various colours give information on the battery‘s state of to the batteries. The Steca Solarix MPPT with latest technology Quality
charge. Here, Steca’s latest algorithms are employed, resulting in optimal ensures full performance in all conditions, a professional battery
10 A...20 A
battery maintenance. The Steca Solsum charge controllers are equipped with care combined with modern design and excellent protection.
an electronic fuse, thus making optimal protection possible. They operate on
the serial principle, and separate the solar module from the battery in order Product features
to protect it against overcharging. ∙∙ Maximum Power Point Tracker (MPP tracker)
68
For larger projects, the charge controllers can also be equipped ∙∙ Voltage and current regulation
USB STECA
with special functions: e.g. with night light function and selec- ∙∙ Automatic load reconnection
Charger Quality 187
table charging plateau and deep-discharge protection voltages. ∙∙ Temperature compensation
25 A...40 A ø5
∙∙ Positive earthing of one or negative earthing of several terminals possible 4x
Product features ∙∙ Monthly equalisation charge

∙∙ Serial topology with MOSFETs
∙∙ Automatic detection of voltage ∙∙ Electronic protection functions
153
115
∙∙ Voltage regulation ∙∙ Overcharge protection
∙∙ PWM control ∙∙ Deep discharge protection
∙∙ Multistage charging technology ∙∙ Reverse polarity protection of module, load and battery
45
15
∙∙ Current compensated load disconnection ∙∙ Reverse polarity protection by internal fuse
177 5
∙∙ Automatic load reconnection ∙∙ Automatic electronic fuse
177
∙∙ Temperature compensation ∙∙ Short circuit protection
5
4x
∙∙ Negative earthing of one or positive earthing of several terminals possible ∙∙ Overvoltage protection at module input 1010 2010
∙∙ Monthly equalisation charge ∙∙ Open circuit protection without battery
∙∙ USB charge socket for smartphones and tablets ∙∙ Reverse current protection at night
97
Nominal power 125 W (250 W) 250 W (500 W)
∙∙ Overtemperature and overload protection
Max. DC-DC efficiency 98.3 % (UBatt=24 V; UIn=30 V; P=0.6*Pnom)
Electronic protection functions ∙∙ Load disconnection on battery overvoltage European efficiency 94.7 % (UBatt=12 V; UIn=30 V)
∙∙ Overcharge protection 187
96.7 % (UBatt=24 V; UIn=30 V)
European efficiency 95.2 %
∙∙ Deep discharge protection Displays (weighted across all UBatt and UIn)
∙∙ Reverse polarity protection of module (≤ 36 V), load and battery ∙∙ Multifunction LED display | Multi-coloured LED Static MPP efficiency 99.9 % (DIN EN 50530)
∙∙ Automatic electronic fuse ∙∙ 5 LEDs show operating states Dynamic MPP efficiency 97.7 % (DIN EN 50530)
2525 4040 Weighted REW 92.8 %
∙∙ Short circuit protection of load and module ~~for operation, state of charge, fault messages (Realistic Equally Weighted efficiency)
∙∙ Overvoltage protection at module input Own consumption 10 mA
∙∙ Open circuit protection without battery Options DC input side
Own consumption < 10.5 mA
∙∙ Reverse current protection at night ∙∙ Evening or night light function pre-set in the factory or adjustable via MPP voltage 15 V (30 V) < UModul < 15 V (30 V) < UModul <<
DC input side 75 V 100 V
∙∙ Overtemperature and overload protection Steca PA RC 100 Open circuit voltage solar module 17 V...75 V 17 V...100 V
(at minimum operating temperature) (34 V … 75 V) (34 V … 100 V)***
∙∙ Load disconnection on battery overvoltage (at minimum operating temperature) ∙∙ Parameterisation of function values via Steca PA RC 100
Module current 9A 18 A
Module current 25 A 40 A
DC output side
Displays DC output side Certificates
Load current** 10 A
∙∙ Multifunction LED display Load current** 25 A 40 A ∙∙ Compliant with European Standards (CE) Reconnection voltage (LVR)* 12.5 V (25 V)
∙∙ Multi-coloured LED USB charge socket 5.2 V / 1.5 A ∙∙ RoHS compliant Deep discharge protection (LVD)* 11.5 V (23 V)
Reconnection voltage (LVR)* 12.4 V ... 12.7 V (24.8 V ... 25.4 V)
∙∙ 5 LEDs show operating states ∙∙ Made in EU Battery side
Deep discharge protection (LVD)* 11.2 V ... 11.6 V (22.4 V ... 23.2 V)
~~for operation, state of charge, fault messages ∙∙ Manufactured according to ISO 9001 and ISO 14001 Charge current 10 A 20 A
Battery side
End of charge voltage* 13.9 V (27.8 V)
Charge current 9 V ... 17 V (17.1 V ... 34 V)
Options Steca accessories Boost charge voltage* 14.4 V (28.8 V)
End of charge voltage* 13.9 V (27.8 V)
∙∙ Evening or night light function pre-set in the factory or adjustable via ∙∙ External temperature sensor Steca PA TS10 Equalisation charge* 14.7 V (29.4 V)
Boost charge voltage* 14.4 V (28.8 V)
Steca PA RC 100 ∙∙ Remote control Steca PA RC100 Set battery type* liquid
Equalisation charge* 14.7 V (29.4 V)
Operating conditions
∙∙ Parameterisation of function values via Steca PA RC 100 Set battery type* liquid η [%]
Ambient temperature -25 °C … +40 °C
Operating conditions 100 Fitting and construction
Certificates Ambient temperature -25 °C … +50 °C 99 Terminal (fine / single wire) 16 mm2 / 25 mm2 - AWG 6 / 4
∙∙ Compliant with European Standards (CE) Fitting and construction 98
Degree of protection IP 32
97 24 V
∙∙ RoHS compliant Terminal (fine / single wire) 16 mm2 / 25 mm2 - AWG 6 / 4 Dimensions (X x Y x Z) 187 x 153 x 68 mm
96
∙∙ Made in EU Degree of protection IP 30 95 12 V Weight approx. 900 g
∙∙ Manufactured according to ISO 9001 and ISO 14001 Dimensions (X x Y x Z) 187 x 97 x 45 mm 94
* adjustable via Steca PA RC100 Technical data at 25 °C / 77 °F
93 ** Inverters must not be connected to the load output.
Weight 345 g
92 *** CAUTION: If an open circuit voltage of more than 75 V or 100 V is supplied to the connected solar
Technical data at 25 °C / 77 °F
Steca accessories 91 module, the controller will be destroyed. When selecting the solar module, it is important to bear in mind
* adjustable via Steca PA RC100
that the open circuit voltage should never exceed 75 V or 100 V over the entire working temperature ran-
∙∙ Remote control Steca PA RC100 ** Inverters must not be connected to the load output. 90
25 50 75 100 ge. When using solar modules with a maximum open circuit voltage of between 60 and 100 V (over the
Power [% of the rated power] entire temperature range), all installation steps must be carried in accordance with protection class II.
16 17
Steca
Classic
18 19
STECA PR STECA SOLARIX
1010 | 1515 | 2020 | 3030 2525 | 4040
The Steca PR 10-30 series of charge controllers is the highlight in the range. Solar charge controllers Steca Solarix 2525 and 4040 are newly developed
Use of the latest charging technologies combined with state of charge de- products based on the internationally renowned controller family Steca PR.
termination enable optimal battery maintenance and module power monito- With increased module and load current, the controllers are now also sui-
ring. A large display informs the user about all operating modes with the aid table for even larger systems. The devices also feature an integrated USB
of symbols. The state of charge is represented visually in the form of a level charging port for charging smartphones and tablets..
meter. Data such as voltage, current and state of charge can also be displayed Use of the latest charging technologies combined with state of charge de-
digitally as figures on the display. In addition, the controller has an energy termination enable optimal battery maintenance and module power monito-
meter which can be reset by the user. ring. A large display informs the user about all operating modes with the aid
STECA of symbols. The state of charge is represented visually as a level meter. Data
Quality such as voltage, current and state of charge can also be displayed digitally as
10 A...30 A figures on the display. In addition, the controller has an energy meter which USB STECA
Charger Quality
can be reset by the user.
25 A...40 A
Product features
∙∙ Shunt topology with MOSFETs Product features
∙∙ State of charge determination with Steca AtonIC (SOC) ∙∙ Shunt topology with MOSFETs
∙∙ Automatic detection of voltage ∙∙ State of charge determination with Steca AtonIC (SOC)
∙∙ PWM control ∙∙ Automatic detection of voltage
44
∙∙ Multistage charging technology ∙∙ PWM control
∙∙ Load disconnection depending on SOC 187 ∙∙ Multistage charging technology
45
∙∙ Automatic load reconnection ∙∙ Load disconnection depending on SOC
ø5
∙∙ Temperature compensation 4x ∙∙ Automatic load reconnection
177
∙∙ Negative earthing of one or positive earthing of several terminals ∙∙ Temperature compensation
5
4x
possible ∙∙ Negative earthing of one or positive earthing of several terminals possible
∙∙ Integrated data logger (energy meter) ∙∙ Integrated data logger (energy meter)
60
96
∙∙ Evening, night light and daylight functions ∙∙ Evening, night light and daylight functions
97
∙∙ Integrated self test ∙∙ Integrated self test
16
∙∙ Monthly equalisation charge ∙∙ Monthly equalisation charge
177 5
∙∙ USB charge socket for smartphones and tablets 187
Electronic protection functions

∙∙ Overcharge protection Electronic protection functions
1010 1515 2020 3030
2525 4040
∙∙ Deep discharge protection ∙∙ Overcharge protection
∙∙ Reverse polarity protection of module, load and battery System voltage 12 V (24 V)
∙∙ Deep discharge protection
∙∙ Automatic electronic fuse Own consumption 12.5 mA ∙∙ Reverse polarity protection of module, load and battery
Own consumption < 18.5 mA
∙∙ Short circuit protection of load and module DC input side ∙∙ Automatic electronic fuse
DC input side
∙∙ Overvoltage protection at module input Open circuit voltage solar module < 47 V ∙∙ Short circuit protection of load and module
∙∙ Open circuit protection without battery ∙∙ Overvoltage protection at module input (at minimum operating temperature)
Module current 10 A 15 A 20 A 30 A
∙∙ Reverse current protection at night ∙∙ Open circuit protection without battery Module current 25 A 40 A
DC output side
∙∙ Overtemperature and overload protection ∙∙ Reverse current protection at night DC output side
Load current* 10 A 15 A 20 A 30 A
∙∙ Load disconnection on battery overvoltage ∙∙ Overtemperature and overload protection Load current* 25 A 40 A
Reconnection voltage (SOC / LVR) > 50 % / 12.6 V (25.2 V)
USB charge socket 5.2 V / 1.5 A
∙∙ Load disconnection on battery overvoltage
Deep discharge protection (SOC / LVD) < 30 % / 11.1 V (22.2 V)
Reconnection voltage (SOC / LVR) > 50 % / 12.6 V (25.2 V)
Displays
programmable
Battery side
Deep discharge protection (SOC / LVD) < 30 % / 11.1 V (22.2 V)
∙∙ Graphical LCD Displays
programmable
End of charge voltage 13.9 V (27.8 V)
Battery side
~~for operating parameters, fault messages, self test Boost charge voltage 14.4 V (28.8 V) ∙∙ Graphical LCD
End of charge voltage 13.9 V (27.8 V)
Equalisation charge 14.7 V (29.4 V) ~~for operating parameters, fault messages, self test
Boost charge voltage 14.4 V (28.8 V)
Operation Set battery type liquid (adjustable via menu)
Equalisation charge 14.7 V (29.4 V)
∙∙ Simple menu-driven operation Operating conditions Operation Set battery type liquid (adjustable via menu)
∙∙ Programming by buttons Ambient temperature -10 °C … +50 °C ∙∙ Simple menu-driven operation Operating conditions
∙∙ Manual load switch Fitting and construction ∙∙ Programming by buttons Ambient temperature -10 °C … +50 °C
Terminal (fine / single wire) 16 mm2 / 25 mm2 - AWG 6 / 4 ∙∙ Manual load switch Fitting and construction
Options Degree of protection IP 31
Terminal (fine / single wire) 16 mm2 / 25 mm2 - AWG 6 / 4
∙∙ Alarm contact Dimensions (X x Y x Z) 187 x 96 x 44 mm Options Degree of protection IP 30
Weight 350 g
∙∙ Alarm contact Dimensions (X x Y x Z) 187 x 97 x 45 mm
Certificates Technical data at 25 °C / 77 °F Weight 350 g
*Inverters must not be connected to the load output.
∙∙ Approved by the World Bank for Nepal Certificates
∙∙ Compliant with European Standards (CE) ∙∙ CE compliant * Inverters must not be connected to the load output.
∙∙ RoHS compliant ∙∙ RoHS compliant

∙∙ Made in EU ∙∙ Made in EU
∙∙ Manufactured according to ISO 9001 and ISO 14001 ∙∙ Manufactured according to ISO 9001 and ISO 14001

∙∙ External temperature sensor Steca PA TS10 ∙∙ External temperature sensor Steca PA TS10
20 21
STECA SOLARIX MPPT Examples of application
3020 | 5020
Steca Solarix MPPT are solar charge controllers with maximum power point
tracking. These are suitable for all common module technologies and are
optimally suited for solar systems with module voltages higher than the A
battery voltage. In particular, such inexpensive PV modules that are used for
grid-connected systems can also be used off-grid.
Steca‘s efficient MPP tracking algorithm always provides the maximum usable
power of the module, significantly increasing energy yield, especially in poor
weather conditions (cloud cover, winter, diffused light). The Steca Solarix
MPPT charge controllers combine state-of-the-art charging technology
with high efficiency, professional battery care with numerous programming
options, modern design, excellent protection functions and an intuitive LC
display with menu guidance. B F D
For remote monitoring, Steca provides the cost-efficient item PA WiFi1 as an
STECA
optional accessory. NEW Quality
20 A...50 A
+ -
Product features
Steca Solarix MPPT 3020 Steca Solarix MPPT 5020
H
∙∙ Maximum Power Point Tracker (MPP-Tracker)
∙∙ High power and efficiency with small dimensions Key:
230 250
A Solar modules
∙∙ Voltage and current regulation
B Solar charge controller Steca Solarix MPPT
∙∙ Automatic load dis- and reconnection D Steca PF 166-H / 240-H
F Steca LED
130
∙∙ Multistage charging technology
155
H Battery
∙∙ Monthly equalisation charge
A A
80
∙∙ Overcharge protection
85
∙∙ Reverse polarity protection of module, load and battery
∙∙ Automatic electronic fuse
3020 5020 C D
∙∙ Short circuit protection
∙∙ Open circuit protection without battery System voltage 12 V (24 V) 12 / 24 / 48 V
∙∙ Reverse current protection at night Nominal power 450 W (900 W) 750 / 1500 / 3000 W
∙∙ Overtemperature and overload protection DC input side
∙∙ Load disconnection on battery overvoltage MPP voltage 15 V (30 V) < UModul 15 V / 30 V / 60 V
< 100 V < UModul < 150 V
Displays
∙∙ Graphical LCD
Open circuit voltage solar module
17 V ...100 V**
(34 V … 100 V**)
17 V / 34 V / 68 V ...
150 V**
B
Module current 30 A 50 A
~for operating parameters, fault messages
DC input side
Load current 20 A
Operation
∙∙ Simple menu-driven operation
Reconnection voltage (LVR)*
Deep discharge protection (LVD)*
12,5 V (25 V)
11,5 V (23 V)
12,5 V / 25 V / 50 V
11,5 V / 23 V / 46 V
L
programmable
∙∙ Programming by buttons Battery side

∙∙ Manual load switch Charge current 30 A 50 A
End of charge voltage 14,1 V (28,2 V) 14,1 V / 28,2 V / 56,4 V
Boost charge voltage 14,4 V (28,8 V) 14,4 V / 28,8 V / 57,6 V
Certificates Equalisation charge 15,0 V (30,0 V) 15,0 V / 30,0 V / 60,0 V
∙∙ Compliant with European Standards (CE) Set battery type liquid
∙∙ RoHS compliant Operating conditions
∙∙ Manufactured according to ISO 9001 and ISO 14001 Ambient temperature -25 °C … +40 °C
Fitting and construction + -
Steca accessories
Dimensions (X x Y x Z) 230 x 130 x 80 mm 250 x 155 x 85 mm H
Terminal (fine / single wire) 16 mm² - AWG 6 35 mm² - AWG 2
∙∙ Webportal through PA WiFi1
Key:
A Solar modules
* Inverters must not be connected to the load output. B Solar charge controller Steca Solarix MPPT
** CAUTION: If an open circuit voltage of more than 100 V or 150 V is supplied to the connected solar C Steca Solarix PLI
module, the controller will be destroyed. When selecting the solar module, it is important to bear in mind D Load (48 V DC)
that the open circuit voltage should never exceed 100 V or 150 V over the entire working temperature L Load (230 V AC)
range. H Battery
22 23
STECA PR 2020 IP STECA SOLARIX 2020-X2
IP 65 version Dual battery charge controller
The functionality of the Steca PR 2020 IP is based on the Steca PR line of solar The Steca Solarix 2020-x2 is a state-of-the-art dual battery charge controller
charge controllers. This is equipped with a large display which shows the that is ideal for use in leisure applications. It is equipped with a solar module
current state of charge (SOC) as a percentage and visually as a level meter. input suitable for all 72-cell crystalline solar modules in 24 V systems and for
State of charge recognition forms the core of the charge controller. The auto- all 36-cell crystalline solar modules in 12 V systems. Both main battery and
adaptive state of charge algorithm results in optimal battery maintenance starter battery are charged simultaneously and continuously by the solar mo-
and control. The Steca PR 2020 IP has been specially designed for operation dule. 90 percent of the available power flows into the main battery while 10
in difficult environments with high salt, moisture and dust content. percent of the power is retained to keep the auxiliary battery fully-charged.
The charge power split can be adapted using the Steca PA LCD1 remote dis-
play. The charge controller is equipped with a high-power load output fed by
the main battery only. The charge controller has a USB charge socket, which
can be used to charge smartphones and tablets. Connection of the Steca PA
Product features LCD1 remote display is optional.
USB STECA
∙∙ Shunt topology with MOSFETs STECA Charger Quality
∙∙ State of charge determination with Steca AtonIC (SOC) Quality
20 A
∙∙ Automatic detection of voltage 20 A
∙∙ PWM control
∙∙ Multistage charging technology Product features
∙∙ Load disconnection depending on SOC ∙∙ Serial topology with MOSFETs
∙∙ Automatic load reconnection ∙∙ Automatic detection of voltage
55
57
∙∙ Temperature compensation ∙∙ Voltage and current regulation
∙∙ Negative earthing of one or positive earthing of several terminals possible ∙∙ PWM control 190
122
∙∙ Integrated data logger (energy meter) ,3
∙∙ Multistage charging technology
ø4
4x
∙∙ Evening, night light and daylight functions ∙∙ Current compensated load disconnection 4x
5
∙∙ Integrated self test ∙∙ Automatic load reconnection

∙∙ Monthly equalisation charge ∙∙ Temperature compensation
∙∙ Positive earthing of one or negative earthing of several terminals
119.5
85
90
Electronic protection functions possible
147
∙∙ Overcharge protection ∙∙ Integrated self test
17.3
∙∙ Deep discharge protection ∙∙ Monthly equalisation charge
15
177
∙∙ Reverse polarity protection of module, load and battery ∙∙ USB charge socket for smartphones and tablets
∙∙ Short circuit protection of load and module 110 6 Electronic protection functions Solarix 2020-x2
∙∙ Overvoltage protection at module input ∙∙ Overcharge protection
∙∙ Open circuit protection without battery ∙∙ Deep discharge protection
Own consumption 22 mA
∙∙ Reverse current protection at night PR 2020 IP ∙∙ Reverse polarity protection of module (≤ 36 V), load and battery
DC input side
∙∙ Overtemperature and overload protection Characterisation of the operating performance ∙∙ Automatic electronic fuse Open circuit voltage solar module < 60 V
∙∙ Load disconnection on battery overvoltage System voltage 12 V (24 V) ∙∙ Short circuit protection of load and module (at minimum operating temperature)
Module current 20 A
Own consumption 12 mA ∙∙ Open circuit protection without battery
DC output side
Displays DC input side ∙∙ Reverse current protection at night Load current 20 A
∙∙ Graphical LCD (at minimum operating temperature)
∙∙ Overtemperature and overload protection USB charge socket 5 V / 1.5 A
~~for operating parameters, fault messages, self test Module current 20 A ∙∙ Load disconnection on battery overvoltage Reconnection voltage (LVR)* 12.5 V
DC output side Deep discharge protection (LVD)* 11.7 V
Operation Load current* 20 A Displays Battery side
∙∙ Simple menu-driven operation Reconnection voltage (SOC / LVR) > 50 % / 12.6 V (25.2 V) ∙∙ 4 LEDs show operating states End of charge voltage* 14.1 V (28.2 V)
∙∙ Programming by buttons Deep discharge protection (SOC / LVD) < 30 % / 11.1 V (22.2 V) Boost charge voltage* 14.4 V (28.8 V)
programmable
Equalisation charge* 15 V (30 V)

∙∙ Manual load switch Battery side Interfaces
End of charge voltage 13.9 V (27.8 V) Set battery type* gel
∙∙ StecaLink Bus
Boost charge voltage 14.4 V (28.8 V) Main / auxiliary battery charging 90 % / 10 %
Options ratio
∙∙ Alarm contact (special version, needs to be mentioned on the purchase Equalisation charge 14.7 V (29.4 V) Certificates Operating conditions
Set battery type liquid (adjustable via menu) Ambient temperature -10 °C … +60 °C
order) ∙∙ Compliant with European Standards (CE)
Operating conditions Fitting and construction
∙∙ RoHS compliant
Ambient temperature -10 °C … +50 °C Terminal (fine / single wire) 6 mm2 / 10 mm2 - AWG 10 / 8
Certificates ∙∙
Fitting and construction Degree of protection IP 31
∙∙ Fit for use in tropical areas (DIN IEC 68 part 2-30) ∙∙ Made in EU
Terminal (fine / single wire) 16 mm2 / 25 mm2 - AWG 6 / 4 Dimensions (X x Y x Z) 190 x 120 x 57 mm
∙∙ Compliant with European Standards (CE) ∙∙ Manufactured according to ISO 9001 and ISO 14001
Degree of protection IP 65 Weight 500 g
Dimensions (X x Y x Z) 122 x 147 x 55 mm Technical data at 25 °C / 77 °F
∙∙ Made in Germany Weight 410 g
Steca accessories * adjustable via Steca PA LCD1
∙∙ Manufactured according to ISO 9001 and ISO 14001 ∙∙ Remote display Steca PA LCD1
* Inverters must not be connected to the load output.
Steca accessories
∙∙ External temperature sensor Steca PA TS20IP10
24 25
Steca
ADVANCED
26 27
STECA TAROM STECA POWER TAROM
4545 | 4545-48 2070 | 2140 | 4055 | 4110 | 4140
The new design for the Steca Tarom sets new standards in this power class. Specially designed for industrial and outdoor applications, the Steca Power
The graphic display informs the user of all important system data. The data Tarom comes with an IP 65 casing made of powder-coated steel.
are saved by the integrated data logger. This solar charge controller is capable of regulating large systems at three
Thanks to the significantly improved state of charge determination, the sys- voltage levels (12 V, 24 V, 48 V). The Steca Power Tarom is based on the
tem is optimally controlled and the batteries are protected. The Steca Tarom technology of the Steca Tarom controller. When connected in parallel, several
charge controller is the ideal choice for larger systems at three voltage levels controllers from this series can be operated via a standard DC bus in a simple
(12 V, 24 V, 48 V). solar home system or in complex hybrid systems.
Two additional switching contacts can be freely configured as a timer, a night STECA
light function, to start generators or as surplus management. Quality
45 A
Product features
∙∙ Shunt topology with MOSFETs Product features STECA
∙∙ State of charge determination (SOC) ∙∙ Shunt topology with MOSFETs
Quality
55 A...140 A
∙∙ Automatic detection of voltage ∙∙ State of charge determination with Steca AtonIC (SOC)
65
∙∙ PWM control ∙∙ Automatic detection of voltage
∙∙ Multistage charging technology ∙∙ PWM control
218
∙∙ Load disconnection depending on SOC ∙∙ Multistage charging technology
∙∙ Automatic load reconnection ∙∙ Load disconnection depending on SOC
190
∙∙ Temperature compensation ∙∙ Automatic load reconnection
∙∙ Negative earthing of one or positive earthing of several terminals ∙∙ Temperature compensation 360
possible ∙∙ Negative earthing of one or positive earthing of several terminals
134
ø8
∙∙ Real-time clock (date, time) possible 4x
∙∙ Innovative, comprehensive data logger with energy meter ∙∙ Integrated data logger (energy meter)
∙∙ Evening, night light and daylight functions ∙∙ Integrated self test OK MENU
260
∙∙ Four freely programmable timers with week day function ∙∙ Monthly equalisation charge
330
∙∙ Integrated self test 4545 5
4545-48
4x
∙∙ Monthly equalisation charge Characterisation of the operating performance Electronic protection functions
20
∙∙ Two configurable multifunctional contacts System voltage 12 V (24 V) 12 / 24 / 48 V ∙∙ Overcharge protection 260 50
Own consumption 30 mA
∙∙ Deep discharge protection Steca Power Tarom 2140, Power Tarom 4110, Power Tarom 4140
94
DC input side
Electronic protection functions Circuit voltage solar module < 60 V < 100 V
∙∙ Reverse polarity protection of module, load and battery
∙∙ Overcharge protection (at minimum operating temperature) ∙∙ Reverse polarity protection by internal fuse 2070 2140 4055 4110 4140
Module current 45 A
∙∙ Deep discharge protection ∙∙ Automatic electronic fuse Characterisation of the operating performance
DC output side
∙∙ Reverse polarity protection of module and battery ∙∙ Short circuit protection of load and module
15.5
45 A System voltage 12 V (24 V) 48 V

Load current* 5
∙∙ Automatic electronic fuse Reconnection voltage (SOC / LVR)177 > 50 % / 12.5 V > 50 % / 50 V ∙∙ Overvoltage protection at module input Own consumption 14 mA
∙∙ Short circuit protection of load and module (25 V) ∙∙ Open circuit protection without battery DC input side
Deep discharge protection (SOC / LVD) < 30 % / 11.7 V < 30 % / 46.8 V Open circuit voltage
∙∙ Open circuit protection without battery ∙∙ Reverse current protection at night
programmable
(23.4 V) solar module < 50 V < 100 V

Battery side (at minimum operating
∙∙ Reverse current protection at night ∙∙ Overtemperature and overload protection temperature)
End of charge voltage 14.1 V (28.2 V) 56.4 V
∙∙ Overtemperature and overload protection ∙∙ Load disconnection on battery overvoltage Module current 70 A 140 A 55 A 110 A 140 A
Boost charge voltage 14.4 V (28,8 V) 57.6 V
∙∙ Load disconnection on battery overvoltage DC output side
Equalisation charge 15 V (30 V) 60 V
Displays Load current* 70 A 70 A 55 A 55 A 70 A
Set battery type liquid (adjustable via menu)
Reconnection voltage
Displays Operating conditions ∙∙ Text LCD > 50 % / 12.6 V (25.2 V) > 50 % / 50.4 V
(SOC / LVR)
Ambient temperature -10 °C … +60 °C Deep discharge protec-
∙∙ Multifunction graphical LCD with backlighting tion (SOC / LVD)
< 30 % / 11.1 V (22.2 V) < 30 % / 44.4 V
programmable
Fitting and construction
Interfaces Battery side
Terminal (fine / single wire) 25 mm2 / 35 mm2 - AWG 4 / 2 End of charge voltage 13.7 V (27.4 V) 54.8 V
Interfaces ∙∙ RJ45 interface to PA Tarcom / PA HS200
∙∙ StecaLink Bus Boost charge voltage 14.4 V (28.8 V) 57.6 V
Dimensions (X x Y x Z) 218 x 134 x 65 mm
Equalisation charge 14.7 V (29.4 V) 58.8 V
∙∙ Open Steca UART interface Weight 800 g Options
Set battery type liquid (adjustable via menu)
Technical data at 25 °C / 77 °F ∙∙ External temperature sensor (included in the scope of delivery)
Options * Inverters must not be connected to the load output. ∙∙ Alarm contact
∙∙ Alarm contact Fitting and construction
Certificates Terminal 50 mm2 - 95 mm2 - 50 mm2 - 70 mm2 - 95 mm2 -
(fine / single wire) AWG 1 AWG 000 AWG 1 AWG 00 AWG 000
Certificates ∙∙ Approved by the World Bank for Nepal
∙∙ Compliant with European Standards (CE) AUX 2 ∙∙ Fit for use in tropical areas (DIN IEC 68 part 2-30)
330 x 330 x 360 x 330 x 330 x 330
∙∙ RoHS compliant AUX 1 ∙∙ Compliant with European Standards (CE) Dimensions (X x Y x Z) 360 x 330 x 190 mm
190 mm 190 mm x 190 mm
∙∙ Made in EU Relay ∙∙ Made in Germany Weight 10 kg
∙∙ Manufactured according to ISO 9001 and ISO 14001 ∙∙ Manufactured according to ISO 9001 and ISO 14001 Technical data at 25 °C / 77 °F
* Inverters must not be connected to the load output.

∙∙ External temperature sensor Steca PA TS-S ∙∙ External temperature sensor Steca PA TS10
∙∙ Data cable Steca PA CAB2 Tarcom ∙∙ Steca PA Tarcom data logger and Steca PA CAB1 Tarcom data cable
∙∙ Current sensor PA HS 400 + - ∙∙ Current sensor Steca PA HS200
28 29
STECA TAROM MPPT
6000-S | 6000-M Overview of functions
Tarom MPPT 6000-S Tarom MPPT 6000-M
The Steca Tarom MPPT solar charge controller sets new standards in the area
Comprehensive, integrated data logger for 20 years of data recording  
of Maximum Power Point trackers. Outstanding efficiency along with unique
Buzzer for alarms  
safety features make it a universal top-grade charge controller.
Three configurable multifunctional contacts for...
There are two inputs that can be connected in parallel or used separate- • ... programmable deep discharge protection (LVD) 
ly. Each input has its own MPP tracker. So there are two charge controllers • ... generator/surplus manager 
• ... automatic switch functions (day, evening, night) 
available in one device. Different module arrays can be flexibly combined in • ... four timers 
one charge controller. Unique lithium-ion battery charge strategy 
With an input voltage of up to 200 V, all kinds of solar modules can be used Innovative charge strategy for NiCd batteries (PA HS400 required) 
in various connection schemes. This charge controller combines high flexi- Battery capacity test during operation (PA HS400 required) 
bility, maximum yields, professional battery care and an appealing design Optimised SOC algorithm (PA HS400 required) 
on the basis of advanced technology. One Steca Tarom MPPT 6000-M can IUIa charging for increased battery capacity (optional) 
communicate with up to 22 Steca Tarom MPPT 6000-S units. By - the - minute datalogging to micro SD card 
STECA Examples of Application

Quality A B A
60 A
Product features
∙∙ Two independent maximum power point trackers (MPP trackers)
∙∙ Comprehensive data logging of energy values for up to 20 years
∙∙ MicroSD slot for data logging of all minute values (6000-M only)
∙∙ Voltage and current regulation
294
∙∙ Temperature compensation 130
∙∙ Monthly equalisation charge

∙∙ Three configurable multifunctional contacts (6000-M only)
∙∙ Adjustable cut-off voltages Key: + -
∙∙ Battery type: gel/liquid lead battery (for 6000-M also Li and NiCd batteries) A Solar modules D G
335
∙∙ Integrated, automatic module switch B Solar charge controller

D Inverter / Charger H
∙∙ 36 V and 60 V batteries can be charged with special settings in F Load (115 V...230 V AC)
G Diesel generator F
expert menu level H Battery
∙∙ Parallel connectable
only with
Electronic protection functions TAROM

∙∙ Overcharge protection
6000-S / 6000-M
Lead MPPT
∙∙ Reverse polarity protection of module and battery
Revolutionary innovative algorithms Lithium
Professional charging strategy for 6000-M
System voltage
Nominal power
12 V / 24 V / 48 V
900 W / 1,800 W / 3,600 W
acid for lead batteries all lithium-ion batteries
∙∙ Open circuit protection without battery Max. DC-DC efficiency 99.4 % (UBatt=48 V; UIn=70 V; P=0,65*Pnom)
European efficiency
∙∙ Reverse current protection at night 96.6 % (UBatt=24 V; UIn=30 V) State of charge (SOC): The Steca Tarom MPPT 6000-M is the first MPPT charge controller to
98.9 % (UBatt=48 V; UIn=70 V)
∙∙ Overtemperature and overload protection The Steca Tarom MPPT 6000-M is equipped with a new type of highly also offer the option of charging lithium-ion batteries professionally
European efficiency 96.4 %
∙∙ PE connection (weighted across all UBatt and UIn) flexible algorithm for precise SOC calculations for nearly all lead-acid using PV current. The latest research results in this area were used in its
Static MPP efficiency 99.9 % (DIN EN 50530)
batteries enabling automatic adaptation to battery and user behaviour. development, which took place in close cooperation with renowned,
Dynamic MPP efficiency 99.8 % (DIN EN 50530)
Displays This enables the current state of charge to be assessed at any time. international research institutes. A self-developed charge strategy can
Weighted REW
94.8 %
∙∙ Multifunction graphical LCD with backlighting (Realistic Equally Weighted efficiency) be perfectly adapted to all available lithium chemistries using a wide
Own consumptiom <1W
Battery capacity test range of parameters.
DC input side
Interfaces The Steca Tarom MPPT 6000-M has an entirely new and professional
Min. MPP voltage / input 17 V / 34 V / 68 V
∙∙ StecaLink Bus Max. MPP voltage / input 180 V battery capacity measurement system, which determines the actual ca-
∙∙ Open Steca RS-232 interface (6000-M only) Min. open circuit voltage solar module / pacity of the battery. To date, capacity generally had to be measured by
NiCd
20 V / 40 V / 80 V
∙∙ Battery emergency off signal connection (optional, 6000-M only) input (at minimum operating temperature) the battery manufacturer in a complex process or locally with additional Professional charging of
Max. open circuit voltage solar module /
200 V measuring equipment. In the Steca Tarom MPPT 6000-M, the Steca PA NiCd batteries
input (at minimum operating temperature)
Certificates Module current 2 x 30 A / 1 x 60 A HS400 electricity sensor can measure the capacity and supply informa-
∙∙ Compliant with European Standards (CE) Battery side tion on battery ageing. Alkaline chemicals like NiCd batteries can also be charged using the
Charge current 60 A
∙∙ RoHS compliant This revolutionary new development provides advanced inspection innovative Steca Tarom MPPT 6000-M (Steca PA HS400 required). A
programmable
End of charge voltage 14.1 V / 28.2 V / 56.4 V

∙∙ Made in EU Boost charge voltage 14.4 V / 28.8 V / 57.6 V options for users, operators and manufacturers – e.g. for awarding bat- professional, configurable charging characteristic curve is available for
∙∙ Manufactured according to ISO 9001 and ISO 14001 Equalisation charge 15 V / 30 V / 60 V tery warranties based on the actual residual capacity. this, which can be adapted to special battery and system prerequisites.
Set battery type liquid (adjustable via menu) Particularly with professional use, this charge strategy opens up entirely
Steca accessories Operating conditions IUIa charging: new possibilities.
∙∙ External temperature sensor Steca PA TS-S (for 6000-M included Depending on the battery type and its condition, the battery capacity
in the scope of delivery) can be increased by up to 20 percent with a constant current char-
Terminal (fine wire) 35 mm2 - AWG 2
∙∙ Data cable Steca PA CAB3 Tarcom (6000-M only) Degree of protection IP 31 ging phase following a full charge of the lead-acid batteries (IUIa char-
∙∙ Current sensor Steca PA HS400 (6000-M only) Dimensions (X x Y x Z) 294 x 335 x 130 mm ge). This function is now available for the first time for stand-alone PV
Weight approx. 6,300 g systems too in the Steca Tarom MPPT 6000-M.
30 31
Steca
SINE WAVE INVERTERS
32 33
STECA SOLARIX PI STECA SOLARIX PI
500-12 | 550-24 | 1100-24 | 1500-48 Flexible and versatile
The new generation of sine wave inverters, Steca Solarix PI, demonstrates
robustness. Existing safety features have also been made more customer-
friendly and robust. The new generation of the Steca Solarix PI possess dif-
ferent technical properties to predecessor models and may not be suitable
to replace these.
In developing the Solarix PI sine wave inverter, Steca has brought about some
innovations. In particular these include the ability to connect all Steca Solarix
PI models in parallel, the innovative operating concept using a single rotary
Inverter type (2x) PI 500-12 PI 550-24 PI 1100-24 PI 1500-48 Inverter type (3x) PI 500-12 PI 550-24 PI 1100-24 PI 1500-48
switch and the electronic fuse. Furthermore, many years of experience have
Continuous power 900 VA 900 VA 1.800 VA 1.800 VA Continuous power 1.350 VA 1.350 VA 2.700 VA 2.700 VA
come into play for deploying these inverters specifically in photovoltaic sys-
Power 30 min. 950 VA 1.000 VA 2.000 VA 2.800 VA Power 30 min. 1.400 VA 1.500 VA 3.000 VA 4.150 VA
tems. This comes through, for instance, in the way that a most diverse range
Power 5 sec. 950 VA 1.350 VA 2.700 VA 4.100 VA Power 5 sec. 1.400 VA 2.050 VA 4.100 VA 5.400 VA
of appliances is provided with a low operating consumption and a stable STECA
energy supply. Quality
500 W...5.500 W
The power of the new generation Steca Solarix PIs is only extensible with the
new parallel connection box Steca PA Link1. Mixing older generation Steca
Solarix PIs and new generation Steca Solarix PIs is not possible.
130
212
ø5
4x
Inverter type (4x) PI 500-12 PI 550-24 PI 1100-24 PI 1500-48
Product features
Continuous power 1.800 VA 1.800 VA 3.600 VA 3.600 VA
∙∙ True sine wave voltage
Power 30 min. 1.850 VA 2.010 VA 4.000 VA 5.500 VA
∙∙ Excellent overload capabilities Power 5 sec. 1.850 VA 2.750 VA 5.500 VA 6.600 VA
∙∙ Optimal battery protection
395
281
∙∙ Automatic load detection
∙∙ Parallel connectable
∙∙ Best reliability
∙∙ Protective insulation according to protection class II Parallel connection
59
∙∙ Control by digital signal processor (DSP) A stand-alone PV system is relatively difficult to size, since often the loads If several inverters are connected in parallel, the desired mode of ope-
190 11
and their average running times are not adequately known, or because, ration is selected using the rotary switch of the device connected to
Electronic protection functions when the system is subsequently expanded, more loads are added. the ‘master socket’. In addition to the modes of operation described
500-12 550-24 1100-24 1500-48
∙∙ Deep discharge protection This is where the simple expandability of the Steca Solarix PI inverters pays above, there is also the setting ‘all on’. This means that not only the master
∙∙ Battery overvoltage shutdown System voltage 12 V 24 V 48 V
off. Up to four devices can be operated in parallel. The connections are made device is continually switched on, but all other connected inverters as well.
∙∙ Overtemperature and overload protection Continuous power 450 VA 450 VA 900 VA 900 VA via an external box, the Steca PA Link1.
∙∙ Short circuit protection Power 30 min. 500 VA 550 VA 1,100 VA 1,500 VA From the outside, the combination of two, three or four inverters functions Quick and robust control
∙∙ Reverse polarity protection Power 5 sec. 500 VA 1,000 VA 1,400 VA 2,800 VA like one device with a correspondingly higher capacity. Internally, in case of The Steca Solarix PI inverter was developed to supply power to a wide
∙∙ Automatic electronic fuse Max. efficiency 93 % 94 % open-circuit operation or low output, e.g. for the lighting, only one inverter range of loads. Even critical loads can be operated, thanks to the quick
Own consumption standby / ON 0.5 W / 6 W 0.7 W / 10 W continues to operate. This has a positive effect on the electricity consump- control. At the heart of the controller is a DSP (digital signal processor)
DC input side
Displays tion, since the devices which are not turned on do not consume any power. which takes on the extensive calculation work. The inverter’s necessary ro-
Battery voltage 10.5 V … 21 V … 32 V 42 V …
∙∙ Multi-coloured LED shows operating states 16 V 64 V Only when a higher capacity is called for, for example when a refrigerator bustness is supplied by a control software program which was developed
Reconnection voltage (LVR) 12.5 V 25 V 50 V is turned on, are all the inverters automatically switched on, thus ensuring in cooperation with a renowned research institute.
Operation Deep discharge protection (LVD) 10.5 V 21 V 42 V trouble-free operation.
∙∙ Main switch AC output side In this regard, Steca Solarix PI inverters are all the same. Only via the connec- Low own consumption
∙∙ Adjustable load detection Output voltage 230 V AC +/-10 % tion to the Steca PA Link1 parallel switch box is one inverter designated as the The sine wave inverter has benefited from Steca’s 15 years of experience in
Output frequency 50 Hz master. This device then has control over the system, whilst the other Steca the field of stand-alone PV systems. This is reflected, for instance, in the low
Options Load detection (standby) adjustable: 2 W ... 50 W Solarix PI inverters operate as slaves. own consumption of the Steca Solarix PI. When used in solar home systems,
Safety
∙∙ Type with 230 V / 60 Hz the inverter is connected to the battery 24 hours a day, and is designed to
Protection class II (double insulated)
∙∙ Type with 115 V / 60 Hz Rotary switch consume as little as possible of the solar-generated energy whilst in load-
Electrical protection reverse polarity battery, reverse polarity AC,
over voltage, over current, over temperature Operating the Steca Solarix PI is made very easy by the large rotary switch on detection or open-circuit modes.
Certificates Operating conditions the front of the device.
∙∙ Compliant with European Standards (CE) Operating temperature 0 °C … +50 °C If the Steca Solarix PI is being used as a single device, three diffe-
∙∙ RoHS compliant Storage temperature -20 °C … +70 °C rent modes of operation are possible, and these may be selected
∙∙ Made in Germany Rel. humidity < 95 %, non-condensing using the rotary switch. The load detection section follows on from
Maximum altitude 2000 m above sea level
∙∙ Manufactured according to ISO 9001 and ISO 14001 the ‘off’ setting on the far left. In this section, the switch can be turned
continuously to match the power consumption of the smallest load. In order
Cable length battery / AC 1.5 m / 1.5 m
Steca accessories to reduce power consumption, the inverter is then turned off, and it checks
Cable cross-section battery / AC 16 mm2 / 1.5 mm2
∙∙ PA Link1 parallel switch box Degree of protection IP 20
periodically whether a load has been turned on. Only if this is the case does
Dimensions (X x Y x Z) 212 x 395 x 130 mm 1) the inverter switch itself on. The ‘on’ setting on the rotary switch follows on
Weight 6.6 kg 1) 9 kg 1) from the load detection section. In this operating status, the inverter makes
Technical data at 25 °C / 77 °F the output voltage continually available.
1)
per inverter
34 35
PLI 5000-48 PLI 2400-24
STECA SOLARIX PLI Characterisation of the operating performance
5000-48 | 2400-24 System voltage 48 V 24 V
Continuous power 5 kW / 5 kVA 2.4 kW / 3 kVA
The Steca Solarix PLI is the first product from Steca Elektronik to offer an all- Power 5 sec. 10 kW / 10 kVA 4.8 kW / 6 kVA
Max. efficiency sine wave > 93 % > 91 %
in-one package. It allows users to supply consumers with 230 V AC power,
Max. efficiency charge controller > 98 %
charges the battery with an integrated MPPT charge controller, and at the
Own consumption standby / ON < 15 W / < 50 W < 14 W / < 45 W
same time permits connection to a generator or an available electricity grid.
AC input side
Everything in a single device.
Input voltage 90 V AC … 280 V AC
This means that solar energy can be used as the top priority, for example. And
Input frequency 40 ... 65 HZ, 50 / 60 Hz (automatic detection)
if that isn’t enough, a generator can be started or the supply can be switched Max. current on transfer system 40 A 30 A
to the public grid. At the same time, the battery can also be recharged by Transfer time 10 ms typical (UPS mode)
either the generator or the grid. Given its very quick switchover time of up to AC output side
10 ms and its flexible energy priority selection, the Solarix PLI also acts as an Output voltage 230 V AC +/- 5 % 220 V AC ... 240 V AC +/- 5 %
uninterruptible power supply. Output frequency 50 / 60 Hz
Even difficult consumers, such as large AC motors, can be started reliably Battery side
with dual overload capacity. The maximum power point tracker in the inte- Battery voltage 38.4 V … 66 V 20 V … 30 V
grated charge controller ensures that, even in adverse weather conditions, Max. charge current of PV 80 A 40 A
the maximum output is obtained from the PV modules in order to optimally Max. charge current of AC 60 A
programmable
charge the battery and supply the consumers with power at the same time. End of charge voltage 54.0 V 27.0 V
NEW STECA Boost charge voltage 56.4 V 28.2 V

Equalisation charge 60.0 V 29.2 V
Quality
Set battery type liquid
2.400 W...45.000 W
DC input side charge controller
Min. MPP voltage 60 V 30 V

Product features
Max. MPP voltage 115 V 80 V
∙∙ True sine wave voltage Steca Solarix PLI 5000-48
Min. open circuit voltage solar module
∙∙ High overload capacity (at minimum operating temperature)
72 V 36 V
∙∙ Integrated MPP tracker Max. open circuit voltage solar module
130
145 V 100 V
∙∙ Multi-stage charge technology
Max. module current 80 A 40 A
∙∙ Monthly equalising charging
Nominal charge power 4800 W 1168 W
∙∙ Auxiliary contact for starting a generator 298
155 Own consumption controller <2W
∙∙ Adjustable charging end voltages 5 5
∙∙ Battery type: gel / liquid lead battery Operating temperature 0 °C ... + 55 °C
∙∙ Lightweight construction Storage temperature - 15 °C ... + 60 °C
∙∙ Easy installation Rel. humidity < 95 %, non-condensing
Maximum altitude 2000 m a.s.l
Electronic protection functions Fitting and construction
419.6
469
∙∙ Overload protection Terminal (AC - fine / single wire) 8 mm² - AWG 8 8 mm² - AWG 8
∙∙ Reverse polarity protection of modules, for battery via fuse Terminal (PV - fine / single wire) 12 mm² - AWG 6 8 mm² - AWG 8
∙∙ Deep discharge protection Battery connection 35 mm² ... 50 mm²
(M6 ring terminal included) AWG 2 ... AWG 0
∙∙ Short-circuit protection for load
Double throw signal contact 3 A / 250 V AC (max. 150 W), 3 A / 30 V DC
∙∙ Reverse current protection at night
5 Degree of protection IP 21
∙∙ Overtemperature and overload protection Dimensions (X x Y x Z) 298 x 469 x 130 mm 275 x 385 x 114 mm
∙∙ Acoustic alarm 122.5
Weight 11.5 kg 7.6 kg
∙∙ PE connection Cooling principle fan
Displays Steca Solarix PLI 2400-24
∙∙ Graphic LC display and three LEDs show operating states
Examples of application
A
114
Operation
∙∙ Simple menu-guided operation
274.8
∙∙ Button-based programming
3- 5.5 180
B
Interfaces
∙∙ Current data is output via RS-232
Options
L
∙∙ Interconnectable in parallel or in three phases (parallel kit required)
362.1
385
Certificates
∙∙ CE-compliant
∙∙ RoHS-compliant Key: G
∙∙ Manufactured under the terms of ISO 9001 and ISO 14001 A Solar modules
B Sine wave inverter Steca Solarix PLI + -
95 G Diesel generator H
H Battery
L Load (230 V AC)
36 37
Off Grid Solar inverter system: STECA AJ
275-12 | 350-24 | 400-48 | 700-48 | 1000-12 | 2100-12 | 2400-24
Off Grid Solar interverter system: The Steca AJ inverter series stands out with its wide range of available power
classes and DC input voltages. This enables the optimal inverter to be used
∙∙ Pure off-grid system (no AC input) for any application. The cables for connecting the battery and the load are
∙∙ PV as only energy source already mounted on the Steca AJ, thus making it easier to install the device.
The automatic standby mode considerably reduces the inverter’s own con-
PV modules
sumption. The Steca AJ inverter’s excellent overload capacity ensures that
even critical loads can be operated easily.
Electrical load 230V AC
+ -
Battery
275 W...2.400 W
Product features
Uninterruptible power supply: ∙∙ True sine wave voltage
∙∙ Excellent overload capabilities Steca AJ 275-12, AJ 350-24, AJ 400-48
∙∙ Optimal battery protection
∙∙ Automatic load detection
Uninterruptible power supply:
84
∙∙ Pure on-grid system Electronic protection functions 170
∙∙ No PV as only energy source, only grid ∙∙ Deep discharge protection

ø6
Public grid 4x
∙∙ Battery is charged from the grid whenever the grid is available ∙∙ Battery overvoltage shutdown
∙∙ Useful when grid fails as backup (10 ms switchover time) ∙∙ Overtemperature and overload protection
∙∙ Short circuit protection
142
90
∙∙ Reverse polarity protection by internal fuse
(except Steca AJ 2100-12)
+ - ∙∙ Acoustic alarm at deep discharge or overheating
26
160 5
Battery
Displays
∙∙ Multi-coloured LED shows operating states
Solar priority with grid connection and/or generator: 275-12 350-24 400-48 700-48 1000-
12
2100- 2400-
12 24
Operation
∙∙ Main switch
System voltage 12 V 24 V 48 V 12 V 24 V
∙∙ Adjustable load detection Continuous power 200 VA 300 VA 500 VA 800 VA 2,000 VA
Power 30 min. 275 VA 350 VA 400 VA 700 VA 1,000 2,100 2,400
Options VA VA VA
Power 5 sec. 450 VA 650 VA 1,000 1,400 2,200 5,000 5,200
∙∙ Types with 115 V / 50 Hz, 115 V / 60 Hz or 230 V / 60 Hz
VA VA VA VA VA
Electrical load 230V AC ∙∙ Model with protective lacquered mainboard Max. efficiency 93 % 94 % 93 % 92 % 94 %
Solar priority with grid connection and/or generator: Own consumption standby / ON 0.3 W / 0.5 W / 1.1 W / 1.5 W / 0.7 W / 0.7 W / 1.2 W /
Certificates 2.4 W 3.5 W 5.2 W 12 W 10 W 16 W 16 W
DC input side
∙∙ Grid-connected system or off-grid with AC generator ∙∙ Compliant with European Standards (CE)
Battery voltage 10.5 V 21 V … 42 V … 64 V 10.5 V … 16 V 21 V …
(external source selector required if both are used) ∙∙ RoHS compliant … 16 V 32 V 32 V
∙∙ PV is priority, alternatively grid / generator can be selected as priority ∙∙ Made in Europe AC output side
∙∙ Optional charging from the grid / generator ∙∙ Manufactured according to ISO 9001 and ISO 14001 Output voltage 230 V AC +0 / -10 % (true sine wave)
Output frequency 50 Hz +/-0.05 % (crystal controlled)
PV modules Steca accessories Load detection (standby) 2W adjustable: 1 W … 20 W
Diesel generator ∙∙ Remote control JT8 (On/Off, LED) for connection to
Steca AJ 1000-12 to Steca AJ 2400-24 (for AJ 275-12 to AJ 700-48
special variant, please state when ordering!)
Cable length battery / AC 1.2 m / 1 m 1.5 m / 1m 1.7 m / 1 m
+ -
Degree of protection IP 30 IP 20
Dimensions (X x Y x Z) 170 x 142 x 84 mm 252 x 455 x 406 x 273 x 117
142 x 84 142 x 84 mm
mm mm
Battery
Weight 2.4 kg 2.6 kg 4.5 kg 8.5 kg 19 kg 18 kg
38 39
XTS XTS XTS XTM XTM XTM XTM XTM XTM XTH XTH XTH XTH
STECA XTENDER Characterisation of the operating performance
900-12 1200-24 1400-48 1500-12 2000-12 2400-24 3500-24 2600-48 4000-48 3000-12 5000-24 6000-48 8000-48
XTS 900-12 | 1200-24 | 1400-48

System voltage 12 V 24 V 48 V 12 V 24 V 48 V 12 V 24 V 48 V
XTM 1500-12 | 2000-12 | 2400-24 | 3500-24 |
Continuous power 500 VA / 650 VA / 750 VA / 1,500 VA 2,000 VA 3,000 VA 2,000 VA 3,500 VA 2,500 VA 4,500 VA 5,000 VA 7,000 VA
2600-48 | 4000-48 650 VA 1) 800 VA 1) 900 VA 1)
XTH 3000-12 | 5000-24 | 6000-48 | 8000-48 Power 30 min. 700 VA / 1,000 VA 1,200 VA 1,500 VA 2,000 VA 2,400 VA 3,500 VA 2,600 VA 4,000 VA 3,000 VA 5,000 VA 6,000 VA 8,000 VA
900 VA 1) / 1,200 / 1,400
VA 1) VA 1)
Power 5 sec. 2.3 kVA 2.5 kVA 2.8 kVA 3.4 kVA 4.8 kVA 6 kVA 9 kVA 6.5 kVA 10.5 kVA 7.5 kVA 12 kVA 15 kVA 21 kVA
Max. efficiency 93 % 94 % 96 % 93 % 94 % 96 %
Own consumption standby / ON 1.4 W / 1.5 W / 1.6 W / 1.4 W / 1.4 W / 1.6 W / 1.6 W / 2W/ 2.1 W / 1.4 W / 1.8 W / 2.2 W / 2.4 W /
Steca Xtender XTS Steca Xtender XTM Steca Xtender XTH 7W 8W 8W 8W 10 W 9W 12 W 10 W 14 W 14 W 18 W 22 W 30 W
Power Factor Correction (PFC) according EN 61000-3-2
Acoustic level < 40 dB / < 45 dB (without / with ventilation)
Product features
Input side
∙∙ True sine wave voltage
Input voltage < 265 V AC (adjustable: 150 V AC … 265 V AC)
∙∙ Excellent overload capabilities
Charging current adjustable 0A… 0A… 0A… 0A… 0A… 0A… 0A… 0A… 0A… 0A… 0A… 0A… 0A…
∙∙ Optimal battery protection The basic functions of the combined inverters Steca Xtender are the inverter, 35 A 25 A 12 A 70 A 100 A 55 A 90 A 30 A 50 A 160 A 140 A 100 A 120 A
∙∙ Adjustable integrated battery charger the battery charger, the switching function and the support of external sour- Max. current on transfer system 16 A 50 A
∙∙ Multistage programmable battery charger with PFC ces of alternating current. These functions can be combined and controlled Input frequency 45 Hz … 65 Hz
∙∙ Automatic load detection fully automatically. The inverters offer outstanding user-friendliness and very Battery side
∙∙ Standby load detection adjustable over a wide range, starting from a good exploitation of the energy available. Battery voltage 9.5 V … 19 V … 38 V … 9.5 V … 17 V 19 V … 34 V 38 V … 68 V 9.5 V … 19 V … 38 V … 68 V
17 V 34 V 68 V 17 V 34 V
low value All the settings of the Steca Xtender can be remote controlled. When a soft-
AC output side
∙∙ Parallel connectable ware with new functions is available, it can be loaded into the system, so
Output voltage 230 V AC +/-2 % / 190 V AC … 245 V AC (true sine wave) / 120 V AC 2)
∙∙ Best reliability the Steca Xtender always stays up to date. Several Steca Xtender can be con- Output frequency 50 Hz, adjustable: 45 Hz … 65 Hz +/-0.05 % (crystal controlled)
∙∙ Can be used as a back-up system or uninterruptible power nected in parallel or to form a three-phase system. That means that up to nine Total harmonic distortion <2%
supply (UPS) Steca Xtender can work together. Load detection (standby) 2 W … 25 W
∙∙ Multifunction contact Operating conditions
∙∙ Adjustable power sharing Multifunction contacts Ambient temperature -20 °C … +55 °C
∙∙ Reliable and noiseless with any kind of load These potential-free contacts can be programmed for many different appli- Fitting and construction
∙∙ Support of sources of alternating current (Smart Boost) cations. They can react to any event outside or inside of the inverter (grid Power Smart-Boost 30 min. 900 VA 1,200 VA 1,400 VA 1,500 VA 2,000 VA 2,400 VA 3,500 VA 2,600 VA 4,000 VA 3,000 VA 5,000 VA 6,000 VA 8,000 VA
∙∙ Automatic support for peak loads (Power Shaving) availability, battery voltage, fault message ...). They can also be programmed Input current balance adjustment 2 A … 16 A 1 A … 50 A
∙∙ Ultra-fast transfer relay on a timer or can be switched on during particular times (at night, at the Multifunction contact adjustable 2 independent contacts 16 A / 250 V AC (potential free change-over contacts)
Degree of protection IP 54 IP 20
∙∙ High efficiency weekend ...). In this way, they can serve to start up a generator, to switch off
Dimensions (X x Y x Z) 222 x 307 x 104 mm 323 x 463 x 130 mm 300 x 497 x 250 mm
∙∙ Control by digital signal processor (DSP) less important loads, to signal a fault, to charge batteries depending on the
Weight 8.2 kg 9 kg 9.3 kg 15 kg 18.5 kg 16.2 kg 21.2 kg 16.2 kg 22.9 kg 34 kg 40 kg 42 kg 46 kg
situation, etc.
Cooling principle convection fan from 55 °C
Parallel connection possible 3 x 1 phase and three-phase
∙∙ Battery overvoltage shutdown Smart-boost function 1)
Steca Xtender XTS in conjunction with ECF-01
2)
Special version, please note on order.
∙∙ Overtemperature and overload protection With the smart-boost function, the output of another source of alternating
∙∙ Short circuit protection current, such as a power generator or a charger connection, can be incre-
∙∙ Reverse polarity protection by internal fuse ased; even when special loads are being used (inductive, asymmetric, with
(except Steca Xtender XTH 3000) high switch-on current). It is also possible to combine the Steca Xtender with
∙∙ Acoustic alarm at deep discharge or overheating almost all inverters which are already present in order to increase the availa-
ble output.
Displays
∙∙ 5 LEDs show operating states
Options
700 W...72.000 W
∙∙ Type with 115 V / 60 Hz (except Steca Xtender XTH 8000-48)
∙∙ Model with protective lacquered mainboard
Certificates Steca Xtender XTS Steca Xtender XTM Steca Xtender XTH
222
∙∙ Compliant with European Standards (CE) 222 3x
ø8 160
ø8
222 222
2x
54.2 98 54.2 98
∙∙ Made in Europe
33
33
∙∙ Manufactured according to ISO 9001 and ISO 14001
Steca- accessories
463
406
240
240
∙∙ Remote control and display Steca RCC-02/03
497
307
307
307
307
442
M6 M6
∙∙ Additional accessories on request:
Prewired mounting structure Steca X-Connect-System,
Battery temperature sensor Steca BTS-01,
ø8
Integrated cooling unit ECF-01, Current Sensor BSP-500/1200, 2x
30
Communications cable, Connection to the three-phase system / p

arallel 256 35
8
220 40
connection CAB-RJ45-2 323 130
300 250
104 104
40 STUDER Innotec Rue des Casernes 57 - CH1950 Sion STUDER Innotec Rue des Casernes 57 - CH1950 Sion 41
Projet : Projet :
Steca
DC LOADS
42 43
DC-DC-voltage converters STECA LEDs
MDC | MDCI LED 4 | LED 6 | LED 8 | LED 12
DC-DC voltage converters are used when the DC-output voltage of the PV Steca LEDs are modern, compact LED lamps that are specially developed for
system does not match the requirements of the appliance. all 12 V and 24 V direct voltage applications. This makes them ideal for all
Since a voltage level of 12 V is required for most low-voltage appliances such lighting in leisure, caravan and home applications. Their high efficiency and
as lamps, multimedia devices, radios or mobile phones, the various models excellent light yield make them particularly suitable for solar home systems.
of the voltage converters deliver a stable supply of 12 V. For instance, if a 12
V energy-saving light is operated in a 24 V or 48 V system, then a suitable
DC-DC voltage converter must be inserted between the load output of the
charge controller and the 12-V energy-saving light.
The MDC and MDCI voltage converters are designed for use in photovoltaic Product features
systems. The models with an output voltage of 13.8 V can also be used as ∙∙ High efficiency
battery chargers for a 12 V battery in a 24 V system. ∙∙ Low weight
For safety reasons, the MDCI series is electrically insulated to protect the user. ∙∙ Very long lifetime
Both the MDCI and the Steca MDC series are protected against high voltage MDCI 100
∙∙ Simple installation
spikes at the input, thus preventing harmful voltage spikes at the input of ∙∙ Maintenance-free
49
the loads. ∙∙ Low own consumption
152
ø5
4x
∙∙ Reverse polarity protection
Product features
43
88
∙∙ High efficiency Certificates
∙∙ Automatic detection of voltage ∙∙ Compliant with European Standards (CE)
22
∙∙ Wide input voltage range ∙∙ RoHS compliant STECA
7 138 Quality
∙∙ Parallel switching of up to two MDCI Steca accessories
MDCI 360 ∙∙ E27 socket 4 W...12 W
64
∙∙ Overtemperature and overload protection
∙∙ Reverse polarity protection
∙∙ Short circuit protection 160
LED 4 LED 6 LED 8 LED 12
6
4x ø Characterisation of the operating performance
Certificates Nominal voltage 12 / 24 V
∙∙ Compliant with European Standards (CE) Nominal power 4.4 W 5.6 W 7.8 W 11.5 W
∙∙ RoHS compliant Rated current 0.36 A / 0.18 A 0.42 A / 0.21 A 0.62 A / 0.31 A 0.90 A / 0.45 A
∙∙ Made in EU Luminus flux 500 lm 600 lm 800 lm 1,100 lm
154
163
Luminus efficiency 110 lm / W 105 lm / W 100 lm / W 95 lm / W
Life span > 30,000 h
DC input side
Input voltage 10 V ... 30 V
65 W...360 W
108 21 Ambient -10 °C ... +50 °C
4
temperature
MDC MDCI Degree of protection IP 20
2412-5 2412-8 2412-12 2412-20 2412-30 1224-7 100 200 360 Dimensions 60 x 105 mm 65 x 135 mm 75 x 135 mm 94 x 151 mm
Characterisation of the operating performance (X x Y x Z)
Nominal power 65 W 105 W 160 W 275 W 415 W 170 W 100 W 200 W 360 W Weight 110 g 120 g 152 g 328 g
Max. efficiency 90 % 85 % Socket E27
DC input side Light colour neutral white (5,700 K)
Input voltage 18 V … 35 V 20 V … 35 V 9 V … 18 V 9 V … 18 V / 20 V … 35 V / Technical data at 25 °C / 77 °F
30 V … 60 V / 60 V … 120 V
DC output side
Output voltage 13.2 V 13.8 V 24 V 12.5 V / 24.5 V
Output current 5.5 A 8A 12 A 20 A 30 A 7A 8A/4A 16.5 A / 8 A 30 A / 15 A
Ambient temperature -20 °C ... +40 °C -20 °C ... +45 °C
Galvanic isolation no yes
Dimensions (X x Y x Z) 87 x 55 x 49 mm 87 x 85 x 49 mm 87 x 115 x 49 mm 87 x 125 x 49 mm 87 x 115 x 49 mm 88 x 152 x 49 mm 88 x 182 x 49 mm 163 x 160 x 64
mm
Weight 170 g 250 g 260 g 480 g 600 g 300 g 500 g 600 g 1.4 kg
Cooling principle convection fan convection convection fan
44 45
Solar refrigerator /
Minimum Steca Steca Steca Steca
Example applications system size
Steca PF
PF 166-H
refrigerator
PF 166-H
freezer
PF 240-H
refrigerator
PF 240-H
freezer
166-H
SOlar freezer The application areas of the Steca PF 166-H and Steca PF 240-H solar
Irradiation
2,5 kWh / 5 kWh / 5 kWh / 5 kWh / 5 kWh /
STECA PF 166-H | STECA PF 240-H refrigerators and freezers are diverse: solar refrigerators and freezers by Steca m² / d m² / d m² / d m² / d m² / d
cater for the most demanding requirements at all times, whether for cooling
Ambient
drinks, in solar home systems, for storing medication in hospitals supplied 25 °C 35 °C 35 °C 35 °C 35 °C
temperature
Steca PF refrigerators are some of the most efficient DC energy-saving re- by stand-alone systems or for storage of frozen food. The most important
frigerators ever developed. Now filled with an even more climate-friendly parameters for the planning of such applications are summarized at a glance Inside
8 °C 8 °C -20 °C 8 °C -20 °C
temperature
refrigerant, they can be used as either a refrigerator or a freezer. in the table opposite.
The Steca PF 166-H and Steca PF 240-H are fully programmable. The inside
PV power
temperature and each of the other configuration values can be set by the 50 Wp 50 Wp 276 Wp 57 Wp 402 Wp
required
user. They are therefore perfectly suited for all DC applications including even
the refrigeration of medicines in hospitals. The optimal electronic control and Battery power 12 V, 24 V, 24 V, 12 V, 24 V,
required 50 Ah 80 Ah 220 Ah 90 Ah 320 Ah
speed regulation of the compressor guarantees extremely efficient use of
energy. This leads to significant cost reductions. Duration of
battery 4,4 days 3,5 days 3,5 days 3,5 days 3,5 days
This product stands out for its user-friendliness, thanks to a large digital dis- independence
play with setting options, the highest standards of quality and reliability,
Assumption: 10% additional energy consumption to compensate daily opening and
energy efficient interior LED lamp and a long service life. The refrigerator or cooling of warm goods.
freezer is easy to clean as it has a sealing plug on the bottom for draining NEW
GENE- STECA A
water. RATION Quality
50 W...72 W
Product features
∙∙ Fast and efficient cooling due to compressor speed control
∙∙ The freezers can be operated via an off-grid battery system
with a 70 Wp photovoltaic module in most climates
∙∙ Automatic detection of voltage
∙∙ Temperature fully programmable
670 mm
655 mm
∙∙ Adjustable refrigerator or freezer function
∙∙ Suitable for all DC applications 270 mm
255 mm
m
m
m
D
m
5 B
5
∙∙ Low maintenance and easy to clean 44
40
270 mm 270 mm
∙∙ Lock with two keys 670 mm 1045 mm
∙∙ Also suitable for mobile use Internal dimensions Internal dimensions
∙∙ Climate-friendly refrigerant Steca PF 166-H Steca PF 240-H
∙∙ Energy-efficient LED interior lamp

+ -
PF 166-H PF 240-H C
Electronic protection functions Characterisation of the operating performance
∙∙ Reverse polarity protection System voltage 12 V (24 V)
∙∙ Deep discharge protection Nominal power 50 W … 72 W
∙∙ Power breakdown display Cooling volume (net) 166 litres 240 litres
∙∙ Temperature alarm Refrigerator temperature +2 °C … +12 °C Key:
Freezer temperature -20 °C … -10 °C
A Solar modules
Displays DC input side B Solar charge controller Steca Solarix MPPT 3020
C Battery
∙∙ Multifunction LED display Input voltage 10 V … 17 V (17 V … 31.5 V) D Steca PF 166-H or Steca PF 240-H
12 V (24 V) battery
∙∙ Digital temperature display DC output side
Reconnection voltage (LVR) 11.7 V (24.2 V)
Operation Deep discharge protection
10.4 V (22.8 V)
∙∙ Programming by buttons (LVD)
Certificates Ambient temperature +10 °C … +43 °C

Mobile use, India
∙∙ Compliant with European Standards (CE)
Dimensions (X x Y x Z) 872 x 917 x 709 mm 1,288 x 919 x 760 mm
Insulation strength 11 cm 12 cm
∙∙ Abstinence of ozone destroying materials according
Weight 47 kg 62 kg
EC 1005/2009 (CFC-free)
Cooling principle compressor
∙∙ Made in EU
Refrigerant 60 g R290 70 g R290
Celsius / Fahrenheit tempe-
adjustable
rature display
Display brightness adjustable
Consumption [Wh / Tag] Steca PF 166-H Steca PF 240-H Hanging baskets 2
Ambient temperature 25 °C 40 °C 25 °C 40 °C Freezer trays 3
Interior temperature +8 °C 87 232 93 266 Cold battery 1
Interior temperature +3 °C 113 303 136 361 Automatic energy-saving
yes
Interior temperature -10 °C 277 624 370 878 mode
Interior temperature -20 °C 525 1215 764 1794 Technical data at 25 °C / 77 °F
Sale of drinks, Burkina Faso Cooled drinks, Caribbean Hospital, Nigeria
46 47
Steca
ACCESSORIES
48 49
STECA PA WIFI1 STECA PA LCD1
WLAN-Box Remote display, accessories for Steca Solarix 2020-x2
The Steca PA WiFi1 Wi-Fi Box provides an interface to the Steca internet The Steca PA LCD1 is a remote graphical display for the Steca Solarix 2020-x2
portal. It thus allows access to up to nine Solarix PLI 2400-24 or Solarix PLI solar charge controller. All system information is shown at a glance, with the
5000-48, or a Solarix MPPT 3020 or Solarix MPPT 5020 from any point in energy flow displayed as a graphic, rendering it intuitively comprehensible.
the world. All that is needed is an internet connection. Thus, a complete The remote display is equipped with a comprehensive data logger with a gra-
monitoring of the entire PV system is also possible from a distance, without phical display, which enables full monitoring of the entire system. Virtually
any additional devices. The portal access is possible with PCs as well as all charge controller parameters can be set and modified using the remote
smartphones and tablets with all operating systems (browser-based). The display. This enables the distribution of charge power between the two bat-
use of the Steca portal is free of charge. teries to be adjusted. For the load output, all automatic time and battery vol-
tage functions are fully programmable. A USB charge socket for smartphones
USB STECA
and tablets is also available. Charger Quality
PA LCD 1
Product features NEW STECA Product features Characterisation of the operating performance
∙∙ Compatible with Solarix PLI 2400-24 and 5000-48 as well as Quality ∙∙ Simple installation System voltage 10 V ... 60 V
Solarix MPPT 3020 and 5020 ∙∙ Fully-fledged integrated data logger Own consumption 30 mA
∙∙ Access to free Steca internet portal ∙∙ Four freely programmable timers with week day function Adjustable parameters – End of charge voltages (float / boost / equal)
– Distribution of the charge power between main
∙∙ Powered by included power supply for Solarix PLI or via data ∙∙ Evening, night light and daylight functions and auxiliary battery
connection to Solarix MPPT ∙∙ Generator manager – Type of battery
– LVD / LVR load output
∙∙ Surplus manager
Safety
∙∙ Automatic shutdown when not in use for more than week
Alarm output for all recorded parameters programmable
∙∙ USB charge socket for smartphones and tablets
Steca PA WiFi 1 Ambient temperature -10 °C ...+ 60 ° C

Displays
Relative humidity 0 % … 95 %, non-condensating
∙∙ Multifunction graphical LCD with backlighting Fitting and construction
A A Operation
Interfaces 1x RJ45, StecaLink Bus
USB charger socket 5 V / 500 mA ... 800 mA
∙∙ Simple menu-driven operation Degree of protection IP 21
∙∙ Programmable via 4 buttons Mounting surface-mounted / flush-mounted
B B Interfaces Weight approx. 400 g
∙∙ StecaLink Bus Technical data at 25 °C / 77 °F
Certificates
∙∙ Compliant with European Standards (CE)
∙∙ Made in EU
D
Key:
+ -
C A
B
Solar modules
Sine wave inverter Steca Solarix PLI
C Battery
STECA PA LINK1
D Load
Parallel switch box, accessories for Steca Solarix PI
Up to four Steca Solarix PI can be operated in parallel. The connections are

A Steca PA WiFi 1 made via this external box, the Steca PA Link1.
The Steca PA Link1 is compatible with all Solarix PI inverters of the actual
generation. STECA
Quality
PA Link1
B D Ambient temperature -20 °C … +50 °C

Relative humidity 0 % … 95 %
Key: Cable 1 x data cable master
3 x data cable slave
A Solar modules
B Solar charge controller Interfaces 4 x inverter (RJ45)
+ -
C Steca Solarix MPPT 5020
C Battery
D Load Weight 830 g
50 51
STECA RCC-02/03 STECA PA TARCOM
Remote control and display (incl. 2m cable), Data logger, accessories for Steca Power Tarom STECA
accessories for Steca Xtender XTS, XTM and XTH Quality
Lots of information on the status of the system can be retrieved using the The Steca PA Tarcom data logger is connected to the RJ45 inter- 01 RMT GSM Ethernet
graphic display of the Steca RCC. Any incidents within the system are also face of the Steca Power Tarom charge controller, or via the Steca
System voltage 12 V / 24 V / 48 V
saved and displayed. This means that any problems which might occur are PA HS200.
Logger capacity 1 Mbit = 2 min. (11 days)  4 h (4 years)
identified early. The data logger is available in several different versions: as a simple RS-232
Own consumption < 10 mA 30 mA
Many values of the Steca Xtender can be set using the Steca RCC, such as the interface to directly save and read data on the PC or Laptop (Steca PA Tarcom
Recorded values relative time, total charge current,
charging process of the battery charger, the programming of the multifunc- 01), as a data logger with an integrated analogue modem (Steca PA Tarcom battery current, solar module current, load current, SOC,
tional contacts and the various operating modes. RMT), as a data logger with an integrated GSM modem for remote monito- battery voltage, system voltage, analog sensor
System status information night, overload, load disconnect, overvoltage, low vol-
An SD card slot can be used for saving parameters, for the data logger or for ring (Steca PA Tarcom GSM) and as a data logger with an Ethernet interface
tage, over temperature, no module
updating the software. for connection to a PC network (Steca PA Tarcom Ethernet). The Steca PA DC output side
Tarcom is delivered with its accompanying software. Battery voltage 8 V ... 65 V
Safety
RCC-02 RCC-03
Displays Alarm output for all recorded parameters programmable
∙∙ Multifunction graphical LCD with backlighting Fitting and construction
Interfaces RS-232 analog gsm ethernet
Mounting Surface-mounted Flush-mounted
modem modem
Operation Dimensions (X x Y x Z) 170 x 170 x 46 mm 120 x 130 x 43 mm
Configurable analog auxiliary 0 mV ... 150 mV
∙∙ Programming by buttons Weight 400 g 268 g input
Technical data at 25 °C / 77 °F Dimensions (X x Y x Z) 129 x 82 x 38 mm
Certificates Weight 150 g
∙∙ Compliant with European Standards (CE) Technical data at 25 °C / 77 °F
∙∙ Made in Europe
STECA PA RC100 STECA PA IRS 1008/180

Programming unit Motion detector
0 A...5 A
The programming unit Steca PA RC100 allows to program Steca solar charge
controllers. The values can be adjusted with the help of switches. After a The Steca PA IRS 1008/180 motion detector is connected to the load output
restart of the charge controller the new settings can be activated by pressing of the night light charge controller. This supplies power to the light, which is
the program-button on the Steca PA RC100. An LED will transfer the values then turned on for a few minutes when some movement is detected. PA IRS 1008/180 PA IRS 1008/180-24
to the controller. The Steca PA IRS 1008/180 stands out, above all, with its extremely low own Characterisation of the operating performance
consumption, and is therefore optimal for use in solar power systems. Own consumption 6 mA 2 mA
Turn on time 1 min. ... 5 min.
DC output side
Battery voltage 12 V 24 V
Load current* 5A
Reach / detection area 7 m / 180°
PA RC100 Degree of protection IP 65
Characterisation of the operating performance Technical data at 25 °C / 77 °F
Product features Supply voltage 3 V (2 x 1.5 V AAA / R03 batteries) * Inverters must not be connected to the load output.
∙∙ Low weight Adjustable parameters – Type of battery: gel / liquid
∙∙ Simple use – Night light function
– End of charge voltages (float / boost / equal)
∙∙ Maintenance-free – Deep discharge protection (LVD)
∙∙ Low own consumption – LVD factor
– Switch-on threshold
Suitable for the following – Steca Solsum F
Steca charge controllers – Steca Solarix PRS
– Steca Solarix MPPT 1010/2010
– Steca Solsum 2525/4040
Weight 90 g
52 53
STECA PA HS200/400 Data cable
Current sensor, accessories for Steca Tarom MPPT STECA PA CAB1 Tarcom | STECA PA CAB2 Tarcom |
6000-M and Steca Power Tarom STECA PA CAB3 Tarcom
The Steca PA HS200/400 is a highly intelligent current sensor with extremely Steca data cables are used to connect the Steca Tarom 4545/4545-48 (PA
low own consumption. CAB2), Steca Tarom MPPT 6000-M (PA CAB3) and Steca Power Tarom (PA
The Steca PA HS200/400 comes into play when (e.g.) an inverter is direct- CAB1) solar charge controllers to a PC via a USB port. This allows direct mo-
ly connected to the battery and the charge controller cannot measure the nitoring of a system without using a data logger. This feature is especial-
current consumption. A shunt is also required when an additional generator ly suitable for short-term system monitoring and on-site testing. The most
Steca PA CAB1 Tarcom
(e.g. PV, wind or diesel) directly charges the battery. The current is measured important system information is transferred to the PC in real time and can
contact-free via a Hall-effect sensor. The data is transmitted to the charge be conveniently analysed and graphically visualised using the Steca TarCom
controller over a cable connection. All types of current flows can be detected: software. To use this convenient data transfer system a driver and the Steca
charge current, load current and battery and DC-side inverter current flows. TarCom software must first be installed on the PC (Download available at
www.stecasolar.com).
STECA
Quality
0 A...400 A Product features
∙∙ Connection cable 1.8 m
Product features ∙∙ FTDI chip as USB-RS-232 converter
∙∙ Robust metal casing Steca PA HS200
∙∙ Automatic detection of voltage Interfaces
∙∙ Wide current measuring range ∙∙ Connection to Steca Tarom 4545/4545-48 and Tarom MPPT 6000-M via Steca PA CAB2 Tarcom
∙∙ Potential free current measurement connector block
60
Steca PA CAB3 Tarcom
∙∙ Communicates and transfers current flows to the charge ∙∙ Connection to Steca Power Tarom via RJ45 plug
controller 2x
ø4
∙∙ Connection to PC via USB
∙∙ Integrated Hall sensor
24
12
Installation software (Windows)
4 95
PA HS400 only: ∙∙ Steca TarCom PC-Software (only Steca Power Tarom and
103
∙∙ Convenient configuration via charge controller Steca Tarom 4545/4545-48)
∙∙ Enhanced measuring precision due to multiple winding possible ∙∙ Virtual COM port (by FTDI driver)
∙∙ Zero calibration possible via charge controller Steca PA HS400 ∙∙ Driver for FTDI chip (by FTDI driver)
∙∙ Configuration of the Steca Power Tarom and Steca Tarom 4545/4545-48
Displays for data transfer
∙∙ 1 or 2 LEDs indicate operating states
80
∙∙ Display via charge controller screen
Interfaces
2x
temperature sensors
∙∙ Two RJ45 cable sockets ø4
STECA PA TS10 | STECA PA TS20IP10 |STECA PA TS-S
∙∙ StecaLink Bus (only Steca PA HS400) 28
14
4 140
The Steca PA TS10, Steca PA TS20IP10 and Steca PA TS-S externaltempera-
Modes of operation ture sensors are used for monitoring the battery temperature.All Steca solar
148
∙∙ »Battery«: measures all battery current flows charge controllers have an integrated temperature sensor that makes them
PA HS200 PA HS400
∙∙ »Load«: measures currents of external loads not c onnected capable of adjusting the charging strategy to suit the current temperature
Characterisation of the operating performance Steca PA TS-S
to the charge controller conditions. The external temperature sensors are only required when the
System voltage 10 V … 65 V 12 V … 65 V
∙∙ »Charge«: measures currents of generators battery must be installed in a different room to the solar charge controller.
Own consumption < 9 mA ≤ 9 mA PA TS10 PA TS20IP10 PA TS-S
∙∙ »Charge/discharge procedure«: measures incoming and outgoing The Steca PA TS10 is supplied with a plug for connection to the solar charge
Measurement accuracy (-20 A … +20 A) +/-1 % (-40 A … +40 A) +/-1 % Characterisation of the operating performance
currents, e.g. for inverters with battery charger (-200 A … +200 A) +/-3 % (-400 A … +400 A) +/-3 % controller and a ring eyelet for connection to the battery screw. The Steca
Measurement accuracy +/-5 %
Measuring interval 60 s 1s PA TS20IP10 comes with plugs and a ring eyelet, making free cable selection Operating conditions
Certificates Operating conditions possible. The external temperature sensors are suitable for use with Steca Ambient temperature -25 °C ... +125 °C
∙∙ Compliant with European Standards (CE) Ambient temperature -15 °C … +50 °C -25 °C … +50 °C PR 10-30, Steca Solarix, Steca Solarix MPPT, Steca Power Tarom, Steca PR Fitting and construction
∙∙ Made in EU Relative humidity 75 % 2020 IP, Steca Tarom 4545/4545-48 and Steca Tarom MPPT 6000-S/6000-M Battery connection ring eyelet Ø 10 mm pin
Fitting and construction solar charge controllers. Charge controller plug twice a 2-pole 2-pole cable, optio-
Interfaces Power Tarom StecaLink Bus connection luster terminal nal connector
(Tarom 4545/4545-48, Tarom Cable 3.75 m without cable 1.8 m
MPPT 6000-M) Product features
Solar charge controller Type Current range “battery“ -200 A... +200 A -400 A... +400 A ∙∙ Passive sensor
mode Weight 95 g 30 g 40 g
Steca Power Tarom Steca PA HS200 ∙∙ Low weight
Current range “charge“ 0 A … +200 A 0 A … +400 A Technical data at 25 °C / 77 °F
Steca Tarom 4545/4545-48 Steca PA HS400 ∙∙ Very long lifetime
mode
Steca Tarom MPPT 6000-M Steca PA HS400
Current range “load“ -200 A … 0 A -400 A … 0 A
∙∙ Simple installation
Solar charge controller Type Connection
mode ∙∙ Maintenance-free
Steca Solarix MPPT 1010/2010,
Degree of protection IP 22 ∙∙ No own consumption Steca Solarix 2525/4040, Steca PA TS10 spring connector strip
Dimensions (X x Y x Z) 103 x 60 x 24 mm 140 x 80 x 28 mm Steca PR 10-30, Steca Power Tarom
Weight 120 g 250 g twice a 2-pole
Steca PR 2020 IP Steca PA TS20IP10
luster terminal
Max. diameter for
19 mm 20 mm Certificates Steca Tarom 4545,
battery cable Steca PA TS-S connector block
Technical data at 25 °C / 77 °F ∙∙ Compliant with European Standards (CE) Steca Tarom 4545-48
∙∙ RoHS compliant Steca Tarom MPPT 6000-S,

Steca PA TS-S 2-pole connector
Steca Tarom MPPT 6000-M
54 55
Steca
SOLAR-HOME-SYSTEMS
56 57
SOLAR-HOME-SYSTEMS Overview of devices
with Steca solar charge controllers
A solar home system consists of a Steca solar charge controller, one or more The solar charge controller is connected directly to the battery using a cable
solar modules, a battery and the connected loads. as short as possible, and fixed to the wall near to the battery, so that it can
be effectively cooled by the passing air flow.
The Steca solar charge controllers control the energy flow of the entire sys-
tem. They make sure that the solar module charges the battery quickly and In principle, the battery is always connected to the solar charge controller Steca Solsum F Steca Solarix PRS Steca Solsum Steca Solarix MPPT
effectively, but they also protect the battery against overcharging. If the first. Then the solar module array is connected to the solar module input of Solar charge controller Solar charge controller Solar charge controller Maximum Power Point Tracker
loads discharge the battery, the solar charge controller, thanks to its precisi- the solar charge controller. Only direct current loads are used in solar home 6 - 10 A; 12 / 24 V 10 - 30 A; 12 / 24 V 25 - 40 A; 12 / 24 V 10 - 20 A; 12 / 24 V
on in calculating the state of charge, switches off the load at exactly the right systems. They are connected directly to the load output of the solar charge
moment, thus protecting the battery from the dangers of deep discharge. controller. This means the Steca solar charge controllers always show the
battery‘s exact state of charge, and thus ensure optimal battery maintenance
Furthermore, Steca solar charge controllers are equipped with an intelligent in all situations. Various Steca energy-saving lights, Steca solar cooling units,
battery monitoring system. The most effective charging method is selected DC-to-DC converters and other loads can be used.
according to the requirements of the batteries. The solar charge controller is
the central controlling component in solar home systems, for it affects all the
functions of the system. For this reason, it is important to choose a reliable Steca PR Steca PR 2020 IP Steca Solarix Steca Solarix MPPT
and high-performance solar charge controller. Solar charge controller Solar charge controller Solar charge controller Maximum Power Point Tracker
10 - 30 A; 12 / 24 V 20 A; 12 / 24 V 25 - 40 A; 12 / 24 V 30 - 50 A; 12 / 24 / 48 V
Smartphone
B E
+ -
C
Key: Steca PF 240-H Steca PF 166-H Steca LED
A Solar modules Solar refrigerator/freezer Solar refrigerator/freezer LEDs
B Solar charge controller 240 l; 12 / 24 V 166 l; 12 / 24 V 4 W, 6 W, 8 W, 12 W
C Battery
E Load 12 / 24 V
Australia
Sweden Burkina Faso Botswana
58 59
Steca
NIGHT LIGHT SYSTEMS
60 61
NIGHT LIGHT SYSTEMS Solar charge controller
an important special application of solar home systems
Night light systems match the structure of the solar home systems, but are
equipped with any Basic, Classic or Advanced Steca charge controller, which
automatically turns on the connected lights for a set time after sunset, and
turns them off again the next morning at the latest. These systems are per- Steca Solsum F Steca Solarix PRS Steca Solsum Steca Solarix MPPT
fectly suited for street lamps and automatic night-time lighting. Solar charge controller Solar charge controller Solar charge controller Maximum Power Point Tracker
Another special model makes these systems to the ideal solution for bus 6 - 10 A; 12 / 24 V 10 - 30 A; 12 / 24 V 25 - 40 A; 12 / 24 V 10 - 20 A; 12 / 24 V
stops and similar applications. Operating in conjunction with a motion detec-
tor, the lamp is only turned on at night time when movement is detected in a
specified area. After a few minutes, the light is then automatically turned off
again. This function can be implemented with any Steca night light charge
controller by connecting it to an external motion detector.
Steca PR Steca PR 2020 IP Steca Solarix Steca Tarom

Greece Solar charge controller Solar charge controller Solar charge controller Solar charge controller
10 - 30 A; 12 / 24 V 20 A; 12 / 24 V 25 - 40 A; 12 / 24 V 45 A; 12 / 24 / 48 V
A A
Steca Solarix MPPT Steca Tarom MPPT 6000-M

Maximum Power Point Tracker Maximum Power Point Tracker
30 - 50 A; 12 / 24 / 48 V 60 A; 12 / 24 / 48 V
B E B D E
Accessories Loads
+ - + -
C C
Steca PA IRS 1008/180 Steca PA RC10 Steca LED

Motion detector Programmiereinheit LEDs
4 W, 6 W, 8 W, 12 W
A 12 / 24 V
Duration of night light function All night After sunset Before sunrise Turn-on time delay Maximum light
“Light on“: current
Solar charge controller:
B I
Steca Solsum F
Steca Solarix PRS
*
*
0 - 8 h*
0 - 8 h*
–
–
–
–
10 A
30 A
Steca Solsum * 0 - 8 h* – – 40 A
Steca Solarix MPPT * 0 - 8 h* – – 20 A
Steca PR  0 - 12 h 0 - 12 h – 30 A
Steca Solarix  0 - 12 h 0 - 12 h – 40 A
Key: Steca PR 2020 IP  0 - 12 h 0 - 12 h – 30 A

A Solar modules Steca Solarix 2020-x2
 0 - 12 h 0 - 12 h 0 - 12 h 20 A
G F B Solar charge controller
C Battery
(only with PA LCD1)
Steca Tarom 4545,
D Motion detector  0 - 12 h 0 - 12 h 0 - 12 h 45 A
+ - E Load (12 V...24 V DC) Steca Tarom 4545-48
C F Load (115 V...230 V AC)
G Sine wave inverter Steca Tarom MPPT 6000-M
 0 - 12 h 0 - 12 h 0 - 12 h 200 A
I Relay (only with external relay)
The type of night light function selected must be specified in the order.
* only for projects with larger order quantities.
62 63
Steca
INVERTER SYSTEMS
64 65
INVERTER SYSTEMS Overview of devices
for both AC and DC
DC AC
Steca Solarix PRS Steca Solsum

Solar charge controller Solar charge controller Steca AJ
10 - 30 A; 12 / 24 V 25 - 40 A; 12 / 24 V Sine wave inverter
500 - 2.400 W
12 / 24 / 48 V
Steca Solarix MPPT Steca PR

Maximum Power Solar charge controller
Point Tracker 10 - 30 A; 12 / 24 V
10 - 20 A; 12 / 24 V
Steca Xtender XTM,

Steca Xtender XTS,
Steca Xtender XTH,
Steca Solarix Steca Tarom Steca Solarix PLI Hybrid-inverter
Solar charge controller Solar charge controller Hybrid-inverter 700 - 72.000 W
25 - 40 A; 12 / 24 V 45 A; 12 / 24 / 48 V 2.400 W - 45.000 W 12 / 24 / 48 V
Inverter systems are designed as solar home systems. The central Ste- If DC appliances are also used, they can be connected directly to the charge con-
ca solar charge controller ensures the battery is charged correctly and troller. An AC system can be created with a system voltage or battery voltage of
protects it against overcharging. In addition, a stand-alone inverter is 12 V, and also with 24 V or 48 V for greater capacities.
connected directly to the battery in these systems so that AC appli- The simple system concept makes installation quick and easy.
ances can be operated.
Steca Solarix MPPT Steca Tarom MPPT 6000-S Steca Solarix PI

Maximum Power Point Tracker Steca Tarom MPPT 6000-M Sine wave inverter
30 - 50 A; 12 / 24 / 48 V Maximum Power Point Tracker 500 - 5.500 W
60 A; 12 / 24 / 48 V 12 / 24 / 48 V
Key:
A A Solar modules
B Solar charge controller
C Battery
D Sine wave inverter
E Generator junction box
F Load (12 V...48 V DC)
L Load (115 V...230 V AC)
B F D
+ -
C L
Philippines Italy
DC AC
66 67
Steca
Mini-grid And
HYBRID-SYSTEMs
68 69
MINI-GRID Off Grid Solar inverter system:
Systemvarianten
for a smart energy mix Autarkes Solar Wechselrichter System:
∙∙ Pure off-grid system (no AC input)
∙∙ PV as only energy source
PV modules
+ -
Battery
Uninterruptible power supply:
Unterbrechnungsfreie Stromversorgung:
∙∙ Pure on-grid system
∙∙ No PV as only energy source, only grid
∙∙ Battery is charged from the grid whenever the grid is available
Public grid ∙∙ Useful when grid fails as backup (10 ms switchover time)
+ -
Solar priority with grid connection and/or generator:

Battery
What is a mini-grid? Advantages of mini-grids.

Mini-grids, which, depending on their size, are also known as micro-grids, The more powerful a PV off-grid system becomes, the more sense it makes
have increasingly developed in many countries into a trend for off-grid to carry out the conversion from DC to AC at an early stage. It has practical
electrification. With the aid of a so-called village power supply system, a advantages in particular for supplies over greater distances, as is the case in
range from individual households up to complete villages can be supplied the electrification of a complete village.
with electricity in this way using photovoltaics units. Significantly lower-priced components, such as cabling which possibly already Solar-Priorität mit Netzanschluss und/oder Generator:
exists, can be thus utilised, in particular as a result of the high voltages in ∙∙ Grid-connected system or off-grid with AC generator
From Steca’s point of view a mini-grid is an autonomous grid which is the AC range. This mostly involves standard equipment which can be easily (external source selector required if both are used)
centrally constructed independently of the public grid. obtained and is familiar. ∙∙ PV is priority, alternatively grid / generator can be selected as priority
The power classes mostly vary between at least 10 kWp and larger. Energy ∙∙ Optional charging from the grid / generator
PV modules
generation takes place to a great extent using DC photovoltaics units and is
Diesel generator
immediately centrally converted into AC current.
The distribution and supply of the complete mini-grid then takes place
exclusively or mainly using AC current, in many cases even three-phase. + -
Battery
Advantages of mini-grids with Steca Solarix PLI 2400-24 and

This is now even easier and more affordable with Steca Solarix PLI 5000-48.
the Steca Solarix PLI 2400-24 and 5000-48.
You can exploit all these advantages with the Steca Solarix PLI hybrid inverter Up to 9 inverters can be interconnected either in parallel and/or
and at the same time significantly reduce the complexity and costs of your three-phase as a result of which systems of up to 21.6 kW or 45 kW can be
system. realised. The parallel or three-phase interconnection takes place simply using
STECA NEW
The Steca Solarix PLI contains both the MPPT charge controller to which the
a communication card for each device.
Quality
solar modules are connected and the inverter which converts the generated The Steca Solarix PLI hybrid inverter thus has logistical advantages:
power from DC to AC – everything in one device. Complex, powerful mini-grids can be easily and inexpensively achieved with
only one model and one accessory. Warehousing, ordering and even the lay-
Even a diesel generator, the public grid or another AC source can all be al- out can thus be made significantly simplified.
ternately connected to the Steca Solarix PLI hybrid inverter. Where required,
the system can thus be re-charged using this power source or, depending on
the setting, the consumers can be supplied at times directly from this power
South Africa source.
70 71
MINI-GRID
Now even easier and cheaper.
Single-phase Mini-Grid-systems Three-phase Mini-Grid-systems
+ - + -
Key:
A Solar modules Key:

B Load (230 V AC)
C Battery A Solar modules
D Public grid alternative genset B Load (400 V AC)
E Steca Solarix PLI C Battery
D Public grid alternative genset
E Steca Solarix PLI
The simple and cost efficient solution for self consumption and Phase 1 Phase 2 Phase 3
hybrid system solutions
Because grid feed-in is becoming increasingly uneconomical in many

countries and involves higher expenditure, self consumption and power
storage are becoming more important.
The new Solarix PLI hybrid inverter is tailor-made for this application.
The hybrid inverter is suited for an autonomous solar system, and for an
uninterruptible power supply as well as for a solar system which can obtain
power from the grid or from a diesel generator where required. + -
C
The Solarix PLI is, however, also attractive for the traditional off-grid markets.
Solar home systems generally dominate these markets. Here too there are D
new solutions. Several hybrid inverters can be connected in parallel and, as
a result, village power supply systems (“mini-grids”) or even power systems
B
for the supply of small factories and craftsman businesses (“small commercial
systems”) are provided.
Belgium Up to 9 inverters can be connected in parallel and/or three-phase.
72 73
HYBRID SYSTEMS
Overview of devices
DC AC
Steca Tarom
Solar charge controller
45 A; 12 / 24 / 48 V
Steca Xtender XTS
Hybrid-inverter
700 W - 12.600 W
12 / 24 / 48 V
Steca Tarom MPPT 6000-S Steca Xtender XTM

Steca Tarom MPPT 6000-M Hybrid-inverter
Maximum Power Point Tracker 1.500 W - 36.000 W
60 A; 12 / 24 / 48 V 12 / 24 / 48 V
The main feature of a hybrid system is the use of two or more Steca Solarix PLI
different electricity sources. Hybrid inverter
2.400 W - 45.000 W
Alongside solar energy, photovoltaic hybrid systems generally employ a die- Photovoltaic hybrid systems offer the advantage that the solar generator
sel generator, a wind turbine or the public grid as a further electricity source. does not have to be significantly oversized for periods of low sunlight. This
The inverters used in hybrid systems, which have integrated battery chargers, avoids substantial costs. When selecting its energy source, the system always
supply the connected AC loads according to demand from the battery bank gives priority to the energy provided by the module. In combination with a
of solar energy or the second electricity source. These devices also allow the controllable second source, the energy supply remains reliable and available Steca Power Tarom Steca Xtender XTH
Hybrid-inverter
batteries to be recharged from the extra energy source. 24 hours a day, all year round. Solar charge controller 3.000 W - 72.000 W
55 - 140 A; 12 / 24 / 48 V 12 / 24 / 48 V
Important features for single-phase and three-phase

hybrid systems
∙∙ Combination of different power sources such as PV, wind, diesel generators

∙∙ 400 V AC three-phase and 230 V AC single-phase available 24 hours a day
∙∙ 12 V, 24 V or 48 V overall DC bus
∙∙ Automatic energy management based on the state of charge calculation
of the battery, including automatic start of controllable power sources like
e.g. diesel generators
∙∙ Optimised battery charging algorithm
∙∙ Optimised system efficiency through DC and AC bus
Australia Germany Marocco
74 75
Steca
BATTERY
CHARGING SYSTEMS
76 77
BATTery charging systems PRODUct overview
efficient, intuitive and safe
Battery chargers Parking space supply units

Steca battery charging devices charge your batteries quickly and safely For many applications, vehicles must be ready for use at all times. Regard-
thanks to the processor-controlled charging processes. Fixed and program- less of whether your application involves a fire engine, a bus or a driverless
mable characteristic curves allow for flexibility during use. Highly efficient transport system (DTS), you have to be able to rely on your system. Parking
and advanced switching power supplies minimise energy losses. A wide ran- space supply units from Steca provide the optimum charging technology. Our
ge of features and ease of use make for trouble-free operation. devices are already providing successful and reliable service in lots of areas.
They are used at many local public transport depots, as stand-by systems
Trickle charging system in fire brigades and for charging driverless transport systems (DTS) during
With the Steca trickle charging system, up to ten lead-acid batteries can be ongoing operation.
connected simultaneously without being connected in parallel. Thanks to The bus depot is one of the main areas of application for parking space sup-
the integrated Steca long-life cycle, lasting operational readiness is a given. ply units. Parking space supply systems are available as individual devices or
A visual error message appears if a connected battery is faulty. This ensures as charging posts. They charge the batteries of the connected vehicle and
that only flawless batteries are connected for reuse. guarantee a charged battery at all times. The parking space supply system
also charges parallel loads in the bus. This protects the battery set and im-
Small charging units proves the service lives of the batteries. With their internal communication
Even lead-acid batteries with small capacities need optimal charging. With interfaces, Steca parking space supply units are best prepared for application
our small charging units, we ensure this by controlled IU characteristic curves in depot management systems. We supply all necessary components as well
and a subsequent automatic trickle charging function. as bus identification modules or our Steca gateway which transfers the data
from the bus and charging post to depot management software. For exam-
ple, a heating signal can be sent to the bus and the feedback can be moni-
tored. The depot management system can display and process the battery
charging parameters, parking space data and bus number.
Depot supply for bus depots and fire stations
Steca battery charging technology stands out from the start thanks to its Consultation and planning Examples of application
high quality and durability. For decades we have been developing efficient In connection with our battery chargers our staff will be glad to give you
and user-friendly charging technology in cooperation with leading battery expert advice on all questions regarding batteries and battery use. We focus
manufacturers and institutes in order to allow you to use your batteries sa- on finding the best solution for your application. This way, we can keep a
fely. constant eye on the applicable standards for the application in question and
Our main focus is on making the charging devices easy to use and achieving implement them. Our engineers and partners can plan your ideal configura-
the best battery charge possible. The charging process is fully automatic and tion and help you draw up specifications.
the user has access to information about the charging behaviour of their bat-
tery at all times. Steca battery charging technology can even test batteries in After-sales service
terms of their charging capacity and remaining capacity. This way, the user We are constantly expanding our network of service partners for distribution,
knows whether or not the battery is still working efficiently and if it is suitable maintenance and repairs. This allows us to react to your enquiries as quickly
for the planned application. This avoids unexpected battery failures and the as possible. We are also happy to advise you over our customer hotline.
resulting costs.
Mobile charging points: warning trailers, trolleys and supporting frames
In addition to battery charging devices and testing devices, we provide par-
king space supply systems for bus depots for example. If you are planning
to construct a battery charging station, you will find that the charging tech-
nology in Steca battery charging devices conforms to all relevant standards.
Battery chargers in use Parking space supply units for bus depots
78 79
STECAMAT 860 STECAMAT 861
Processor-controlled charger for lead-acid batteries Processor-controlled charger for lead-acid batteries
The battery charger Stecamat 860 is available in a dust and hose-proof hou- The battery charger Stecamat 861 is available in a dust and hose-proof hou-
sing. The processor-controlled charging process ensures gentle and rapid sing. The processor-controlled charging process ensures gentle and rapid
charging of the battery. The Stecamat 860 also enables the processing of charging of the battery. For individual adjustment of current, voltage, time
damaged or totally discharged batteries, ensuring long service life. A LED and the ideal monitoring of the battery, the Stecamat 861 battery charger
provides rapid information on the state of charge. has a selection of preset battery profiles and the option of entering new
Maximum flexibility is provided by the extensive features. This and the easy battery profiles. The Stecamat 861 also enables the processing of damaged
handling of the device make for trouble-free operation. or totally discharged batteries, ensuring long service life. A backlit display
provides rapid information on the state of charge.
Maximum flexibility is provided by the extensive features. This and the easy
handling of the device make for trouble-free operation.
STECA STECA
Quality Quality
127 127

∙∙ IP 65 jet waterproof case ∙∙ Besides preset battery profiles there is the option of entering
∙∙ Half the charging time compared to simple, new battery profiles
non-controlled chargers with the same rated current ∙∙ IP 65 jet waterproof case
∙∙ Optimal for charging batteries with liquid electrolyte and ∙∙ Half the charging time compared to simple,
solid gel / absorbed electrolyte (AGM) non-controlled chargers with the same rated current
535
535
∙∙ Suitable for totally discharged batteries ∙∙ Optimal for charging batteries with liquid electrolyte and
∙∙ Constant battery operational readiness through solid gel / absorbed electrolyte (AGM)
integrated trickle charge ∙∙ Adjustable rated capacity determines the charging current
∙∙ Charging below the gassing voltage ∙∙ Suitable for totally discharged batteries
∙∙ Optimal charging of damaged batteries ∙∙ Constant battery operational readiness through
∙∙ Potential-free contact for ventilator control of the battery integrated trickle charge
room venting system ∙∙ Charging below the gassing voltage
∙∙ Optimal charging of damaged batteries
224 224
Electronic protection functions ∙∙ Potential-free contact for ventilator control of the battery
∙∙ Protection in the case of wrong or damaged batteries room venting system
∙∙ Battery overcharge protection
∙∙ Charger output protected against short circuits, reverse polarity and over- Electronic protection functions
226 226
voltage ∙∙ Protection in the case of wrong or damaged batteries
Technical data Technical data
Display ∙∙ Charger output protected against short circuits,
Charging rated voltage 12 V 24 V 48 V Charging rated voltage 12 V 24 V 48 V
∙∙ Multi-coloured LED shows operating statuses reverse polarity and overvoltage
Charging current 50 A 35 A 18 A Charging current 50 A 35 A 18 A
∙∙ Surge protection in on-board power supplies
End-of-charge voltage 14.4 V 28.8 V 57.6 V End-of-charge voltage 14.4 V 28.8 V 57.6 V
Operation
Trickle charge voltage 13.8 V 27.6 V 55.2 V Trickle charge voltage 13.8 V 27.6 V 55.2 V
∙∙ Mains grid switch Display
Characteristic curve UoIUoIU Characteristic curve UoIUoIU
Grid voltage 230 V AC ± 10 %
∙∙ Multifunction graphical LCD with backlighting for voltage, current, char- Grid voltage 230 V AC ± 10 %
Interfaces Grid frequency 50 Hz (45 Hz ... 65 Hz) ged capacity, charging phase, menu Grid frequency 50 Hz (45 Hz ... 65 Hz)
∙∙ Control contact for ventilation control system in accordance with DIN EN Mains electricity 3.7 A (230 V) 5.5 A (230 V) Mains electricity 3.7 A (230 V) 5.5 A (230 V)
50272 Discharge current during grid failure 1 mA Operation Discharge current during 1 mA
grid failure
Protection class I ∙∙ Mains grid switch
Protection class I
Options Casing / ingress protection aluminium / plastic, IP 65 ∙∙ Four cursor buttons for menu selection
Casing / ingress protection aluminium / plastic, IP 65
Ambient temperature -40 °C ... +60 °C
∙∙ IO box with mains plug and relay for ventilator control Ambient temperature -20 °C ... +60 °C
Cooling convection
Interfaces Cooling Convection
Dimensions X x Y x Z 226 x 535 x 127 mm
∙∙ Control contact for ventilation control system in accordance with Dimensions X x Y x Z 226 x 535 x 127 mm
Weight approx. 11.5 kg
DIN EN 50272 Weight approx. 11.5 kg
Options
∙∙ IO box with mains plug and relay for ventilator control
80 81
STECAMAT 861 ES STECAMAT 820
Processor-controlled charger / Processor-controlled charger for lead-acid batteries
discharger for lead-acid batteries
The battery charger Stecamat 820 is available in a light, compact housing.
The Stecamat 861 ES battery charger features a discharging stage of 140 W. The processor-controlled charging process ensures gentle and rapid charging
It can recharge 12 V batteries with 720 W of power or discharge, charge and of the battery. The current, voltage, time and ideal monitoring of the battery
evaluate batteries in one automated test cycle. are individually adjusted by the setting of the rated capacity. The Stecamat
For individual adjustment of current, voltage, time and the ideal monitoring 820 also enables the processing of damaged or totally discharged batteries,
of the battery, the Stecamat 861 ES battery charger has a selection of preset ensuring long service life. A LED provides rapid information on the state of
battery profiles and the option of entering new battery profiles. The Steca- charge.
mat 861 ES also enables the processing of damaged or totally discharged The wide range of features make for high flexibility of use. This and the easy
batteries, ensuring long service life. A backlit display provides rapid informa- handling make for trouble-free operation, even when wearing gloves.
tion on the state of charge.
Maximum flexibility is provided by the extensive features. This and the easy
handling of the device make for trouble-free operation.
STECA STECA
Quality Quality
127
128
∙∙ IP 65 jet waterproof case ∙∙ Half the charging time compared to simple,
∙∙ Battery processing for wet, gel and AGM batteries possible non-controlled chargers with the same rated current
∙∙ Charges 12 V lead-acid batteries (max. 50 A) ∙∙ Optimal for charging batteries with liquid electrolyte and 248
∙∙ Adjustable rated capacity determines the charging current solid gel / absorbed electrolyte (AGM)
∙∙ Charging below the gassing voltage ∙∙ Adjustable rated capacity determines the charging current
535
∙∙ Features 2 pre-set and 4 programmable charging characteristics ∙∙ Suitable for totally discharged batteries
∙∙ Automated testing for 12 V lead-acid batteries ∙∙ Constant battery operational readiness through
(charge – discharge – charge) integrated trickle charge
∙∙ 12 V discharging stage with 10 A discharge current ∙∙ Ready for operation in just a few minutes
(you can select between 2.5 A, 5 A and 10 A) ∙∙ Charging below the gassing voltage
280
429
∙∙ Capacity detection of 12 V lead-acid batteries ∙∙ Optimal charging of damaged batteries
∙∙ Suitable for treating deep-discharged batteries
∙∙ Potential-free contact for ventilator control of the battery Electronic protection functions
224
room venting system ∙∙ Protection in the case of wrong or damaged batteries
Electronic protection functions ∙∙ Charger output protected against short circuits, reverse polarity
∙∙ Protection in the case of wrong or damaged batteries and overvoltage 230
226
∙∙ Charger output protected against short circuits, reverse polarity and Display
Technical data
overvoltage Technical data ∙∙ Multi-coloured LED shows operating statuses
Charging rated voltage 12 V 24 V 48 V
∙∙ Surge protection in on-board power supplies Charging rated voltage 12 V
Charging current 50 A 35 A 18 A
Charging current 50 A Operation End-of-charge voltage 14.4 V 28.8 V 57.6 V
Display End-of-charge voltage 14.4 V ∙∙ Adjustable rated capacity via rotary switch Trickle charge voltage 13.8 V 27.6 V 55.2 V
Trickle charge voltage* 13.8 V
∙∙ Multifunction graphical LCD with backlighting for voltage, current, Characteristic curve UoIUoIU
Max. rated discharge voltage 12 V
charged capacity (charging), spent capacity (discharging), charging Interfaces Grid voltage 230 V AC ± 10 %
Discharge cut-off voltage 10.5 V (10 V ... 11 V adjustable)
phase, test phase, menu ∙∙ Control contact for ventilation control system in accordance Grid frequency 50 Hz
Discharge current selectable: 2.5 A / 5 A / 10 A
Mains electricity 3.7 A (230 V) 5.5 A (230 V)
Characteristic curve UoIUoIU (charging), UoIUa (testing)
with DIN EN 50272
Discharge current during grid failure 1 mA
Operation Capacity test cycle charging / discharging / charging
Protection class I
∙∙ Mains grid switch Grid voltage 230 V AC ± 10 % Options
Casing / ingress protection plastic, IP 20
∙∙ Four cursor buttons for menu selection Grid frequency 50 Hz (45 Hz ... 65 Hz) ∙∙ IO box with mains plug and relay for ventilator control Ambient temperature -20 °C ... +60 °C
∙∙ Capacity test cycle: charge, discharge, charge Mains electricity 3.7 A (230 V)
Cooling regulated fan
Discharge current during grid failure 1 mA
Protection class I
Interfaces Weight approx. 6 kg
Casing / ingress protection aluminium / plastic, IP 65
∙∙ Control contact for ventilation control system in accordance with DIN Technical data at 25 °C / 77 °F
Ambient temperature -20 °C ... +60 °C
EN 50272
Cooling convection
Options Weight approx. 11.5 kg
∙∙ IO box with mains plug and relay for ventilator control Technical data at 25 °C / 77 °F
* only for charging programme
82 83
STECAMAT 821 STECAMAT 862
Processor-controlled charger for lead-acid batteries Processor-controlled charger for lead-acid
batteries with communication feature
The battery charger Stecamat 821 is available in a light, compact housing.
The processor-controlled charging process ensures gentle and rapid char- The battery charger Stecamat 862 charges the battery gently and quickly
ging of the battery. For individual adjustment of current, voltage, time and thanks to a processor-controlled charging process. The Stecamat 862 thus
the ideal monitoring of the battery, the Stecamat 821 battery charger has a enables the processing of damaged or totally discharged batteries, ensuring
selection of preset battery profiles and the option of entering new battery long service life. The IP 65-certified dust and splash-proof housing allows
profiles. The Stecamat 821 also enables the processing of damaged or totally for outdoor installation. Data can be read and processed centrally thanks
discharged batteries, ensuring long service life. A backlit display provides to the integrated RS-485 interface. With this communication interface, the
rapid information on the state of charge. various charging parameters can be adjusted and the charging current can be
The wide range of features make for high flexibility of use. This and the easy increased to a maximum of 35 A. The integrated interface allows for commu-
handling of the device make for trouble-free operation. nication with buses that are equipped with an integrated bus identification
module (BIM).
STECA STECA
Quality Quality
127

∙∙ Besides preset battery profiles there is the option of entering new ∙∙ IP 65 jet waterproof casing
battery profiles ∙∙ Half the charging time compared to simple, non-controlled
∙∙ Half the charging time compared to simple, chargers with the same rated current
non-controlled chargers with the same rated current ∙∙ Optimal for charging batteries with liquid electrolyte and solid
∙∙ Optimal for charging batteries with liquid electrolyte and gel / absorbed electrolyte (AGM)
535
solid gel / absorbed electrolyte (AGM) ∙∙ Suitable for totally discharged batteries
∙∙ Adjustable rated capacity determines the charging current ∙∙ Constant battery operational readiness through integrated
∙∙ Suitable for totally discharged batteries trickle charge
∙∙ Constant battery operational readiness through ∙∙ Charging below the gassing voltage
integrated trickle charge ∙∙ Optimal charging of damaged batteries
∙∙ Ready for operation in just a few minutes ∙∙ Communication with bus identification module for vehicle iden-
∙∙ Charging below the gassing voltage tification, heating control and query of ignition status
∙∙ Optimal charging of damaged batteries ∙∙ Interface for bidirectional communication
224
Electronic protection functions Electronic protection functions

∙∙ Protection in the case of wrong or damaged batteries ∙∙ Protection in the case of wrong or damaged batteries
∙∙ Battery overcharge protection ∙∙ Battery overcharge protection
226
∙∙ Charger output protected against short circuits, reverse polarity and ∙∙ Charger output protected against short circuits, reverse polarity
overvoltage and overvoltage
Technical data
Technical data
Display Charging rated voltage 12 V 24 V 48 V Displays Charging rated voltage 24 V
∙∙ Multifunction graphical LCD with backlighting for voltage, current, ∙∙ Multi-coloured LED shows operating states Charging current 20 A (max. 35 A)
Charging current 50 A 35 A 18 A
End-of-charge voltage 27.6 V
charged capacity, charging phase, menu End-of-charge voltage 14.4 V 28.8 V 57.6 V
Trickle charge voltage 27.2 V
Trickle charge voltage 13.8 V 27.6 V 55.2 V Operation
Characteristic curve UoIUoIU
Operation Characteristic curve UoIUoIU ∙∙ Charging parameters adjustable via RS-485
Grid voltage 230 V AC ± 10 %
∙∙ Four cursor buttons for menu selection Grid voltage 230 V AC ± 10 %
Grid frequency 50 Hz (45 Hz ... 65 Hz)
Grid frequency 50 Hz (45 Hz ... 65 Hz) Interfaces Mains electricity 4.0 A (230 V)
Mains electricity 3.7 A (230 V) 5.5 A (230 V)
Interfaces ∙∙ RS-485 for connection to the depot management software Discharge current during 1 mA
Discharge current during grid failure 1 mA grid failure
∙∙ Control contact for ventilation control system in accordance with DIN
Protection class I Protection class I
EN 50272
Casing / ingress protection plastic, IP 20 Casing / ingress protection aluminium / plastic, IP 65
Ambient temperature -20 °C ... +60 °C Ambient temperature -40 °C ... +60 °C
Options Cooling regulated fan Cooling convection
∙∙ IO box with mains plug and relay for ventilator control Dimensions X x Y x Z 248 x 429 x 128 mm Dimensions X x Y x Z 226 x 535 x 127 mm
Weight approx. 6 kg Weight approx. 11.5 kg
Technical data at 25 °C / 77 °F Technical data at 25 °C / 77 °F
84 85
Use the synergies by the know-how from different business seg-
ments and product areas for which we deliver electronic compon-
ents and modules:
HOME APPLIANCES & CONSUMER

ELECTRONICS
- Refrigerators and freezers
Steca
- Electrical equipment
- Heating controllers
- Cable assemblies
EMS PROVIDER AUTOMOTIVE

- Controls for auxiliary heating systems
and sliding car roofs
- Power distribution modules / fuse modules
- LED lighting systems for car interieur
Steca is certified according to Steca is audited according to

MEDICAL TECHNOLOGY
- ISO 9001 - EN ISO 13485
- Dental technology for practice and
- ISO 14001 laboratory facilities
- ISO 50001 - Mobile heart defibrillators
- ISO/TS 16949 - Microscopy systems
- Pipette systems for analysing solids and fluids
INDUSTRIAL ELECTRONICS
- Step motor controls
- Pump controls
- Sensors
- Welding machines
- Packing machines
- Control units (HMI)
Steca guarantees top quality, safety and reliability, and places considerable em-
phasis on environmental compatibility during the development, construction,
manufacture and distribution of its products. In order to reach these quality
SOLAR & ENERGY
targets, Steca employs quality control and quality improvement strategies.
- Grid inverters for residential systems
- PV off grid
- Solar charge controllers
- Solar thermal controllers
STECA

- Heating and domestic hot water controllers
- Battery charging systems
Quality
86 87
Steca
International
Network For you on-site.
With two locations, Steca can combine the quality and flexibility of a
German provider with the advantages of low-cost production abroad.
Enthusiastic and motivated staff on site, an experienced inter-
national and multilingual sales team as well as many sales part-
ners and authorised wholesalers worldwide make Steca a sig-
nificant company on both a national and international scale.
Memmingen | Germany
Foundation 1976 | 450 employees
- Research and development
- Industrialisation
- Marketing, sales, puchasing
- Production
- Service
Steca is part of the PRIMEPULSE network.

PRIMEPULSE is the management holding company and group within which the experienced
founders and managers of TecDAX-listed CANCOM SE and the AL-KO Group, which developed as a
family business, actively guide their equity investments to success using their digital expertise and
entrepreneurial skill. The efficient network includes international companies such as CANCOM,
AL-KO and Stemmer Imaging.
The PRIMEPULSE Group operates in the IT, vision technology, electronics, e-business, automotive, Saedinenie | Bulgaria
air technology, garden tech and real estate segments. As a strategic investor, PRIMEPULSE takes Foundation 2006 | 300 employees
a long-term, value-oriented approach to equity investment and is a safe long-term partner for - Industrialisation
companies and real estate projects. - Purchasing
- Production
88 89
732.238 | 25.2018
Steca Elektronik GmbH facebook.com/StecaElektronik

Mammostraße 1
87700 Memmingen youtube.com/c/StecaElektronik
Germany
T +49-(0)8331-8558-0
F +49-(0)8331-8558-131
[email protected]
www.steca.com
90

Katalog OffGrid EN Web PDF

Uploaded by

Copyright:

Available Formats

Katalog OffGrid EN Web PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Katalog OffGrid EN Web PDF

Uploaded by

Copyright:

Available Formats

ENGLISH

Solar charge controllers | Basic 12

Solar charge controllers | Classic 18

Solar charge controllers | Advanced 26

Sine wave inverters 32

Solar home systems 56

Night light systems 60

Mini-grid | Hybrid systems 68

Battery charging systems 76

Steca | EMS Provider 86

Steca | International network 88

Nowadays, we are highly diversified as an electronics service provider

As part of the PRIMEPULSE Group, Steca has an international network and

Basic solar charge controllers

The solar charge controller is the central component in a stand-alone system.

Selecting the topology User interface 12

of connecting to the stand-alone inverters for communication and

Dimensioning the solar charge controller

Steca Tarom Steca Tarom MPPT Steca Power Tarom

Sine wave inverters Selecting the battery

Pnom is the rated power of the inverter in watts and

Pnom inverter Unom battery Battery capacity

Product features Product features

∙∙ Automatic load reconnection ∙∙ Automatic load reconnection

∙∙ Overcharge protection ∙∙ Overcharge protection

Steca accessories Steca accessories

Product features ∙∙ Monthly equalisation charge

∙∙ Temperature compensation ∙∙ Short circuit protection

∙∙ Negative earthing of one or positive earthing of several terminals ∙∙ Temperature compensation

Electronic protection functions

∙∙ RoHS compliant ∙∙ RoHS compliant

Steca accessories Steca accessories

∙∙ Programming by buttons Battery side

∙∙ Integrated self test ∙∙ Automatic load reconnection

Equalisation charge* 15 V (30 V)

possible ∙∙ Negative earthing of one or positive earthing of several terminals

45 A System voltage 12 V (24 V) 48 V

(23.4 V) solar module < 50 V < 100 V

Steca accessories Steca accessories

STECA Examples of Application

∙∙ Monthly equalisation charge

∙∙ Integrated, automatic module switch B Solar charge controller

Electronic protection functions TAROM

End of charge voltage 14.1 V / 28.2 V / 56.4 V

NEW STECA Boost charge voltage 56.4 V 28.2 V

Min. MPP voltage 60 V 30 V

∙∙ Integrated MPP tracker Max. open circuit voltage solar module

∙∙ Pure on-grid system Electronic protection functions 170

∙∙ No PV as only energy source, only grid ∙∙ Deep discharge protection

XTS 900-12 | 1200-24 | 1400-48

∙∙ Manufactured according to ISO 9001 and ISO 14001

∙∙ Remote control and display Steca RCC-02/03

Communications cable, Connection to the three-phase system / p

∙∙ Energy-efficient LED interior lamp

Certificates Ambient temperature +10 °C … +43 °C

Steca PA WiFi 1 Ambient temperature -10 °C ...+ 60 ° C

Parallel switch box, accessories for Steca Solarix PI

Up to four Steca Solarix PI can be operated in parallel. The connections are

B D Ambient temperature -20 °C … +50 °C