Data Sheet

Cisco 250 Series Smart Switches

Build a reliable, easy-to-use business network at an affordable price
In today's hyper-connected world, reliable access to network resources is critical to all businesses. However, you
also need to invest wisely to stay competitive, knowing how to separate the essential from the extraneous and get
the most value for your dollar. For investment in network infrastructure, building a solid foundation for your
business is essential, but it doesn’t mean you need the most advanced feature set on the market.

For businesses requiring high performance, advanced security, and rich manageability from the network, fully
managed switches are an excellent choice. However, they also typically come with high price tags. Smart switches
provide the right level of network features and capabilities for growing businesses at a lower price, so you’ll have
more dollars to put toward other areas of your business.

With Cisco® 250 Series Smart Switches (Figure 1), you can achieve business-class network performance and
security without paying for advanced network features that you will not use. When you need a reliable solution to
share online resources and connect computers, phones, and wireless access points, but low cost is a top priority,
Cisco 250 Series Smart Switches provide the ideal solution.

Figure 1. Cisco 250 Series Smart Switches

The Cisco 250 Series is the next generation of affordable smart switches that combine powerful network
performance and reliability with a complete suite of the network features you need for a solid business network.
These powerful Fast Ethernet or Gigabit Ethernet switches, with Gigabit or 10 Gigabit Ethernet uplinks, provide
multiple management options, sophisticated security capabilities, fine-tuned Quality-of-Service (QoS) and Layer 3
static routing features far beyond those of an unmanaged or consumer-grade switch, at a lower cost than for fully
managed switches. And with an easy-to-use web user interface, Smart Network Application, and Power over
Ethernet Plus (PoE+) capability, you can deploy and configure a complete business network in minutes.

Business applications
Whether you need basic, high-speed connectivity for your computers and servers or a comprehensive voice, data,
and wireless technology solution, Cisco 250 Series switches can meet your business needs. Possible deployment
scenarios include:

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 17
 ● High-speed desktop connectivity: Cisco 250 Series switches can quickly and securely connect
employees working in small offices with one another and with all of the printers, servers, and other devices
they use. High performance and reliable connectivity help speed up file transfers and data processing,
improve network uptime, and keep your employees productive.
● Flexible wireless connectivity: Cisco 250 Series switches work with Cisco and third-party wireless
solutions to extend the reach of your network. With security features, Power over Ethernet (PoE), VLAN,
and QoS, these switches are the perfect foundation to add business-grade wireless to a network.
The capability of up to 30W of power per port provided through the Ethernet cable means you can easily
deploy innovative 802.11ac wireless technology to maximize workforce productivity.
● Unified communications: The Cisco 250 Series provides QoS features to enable you to prioritize delay-
sensitive traffic in your network and let you converge all of your communications solutions such as IP
telephony and video surveillance onto a single Ethernet network. Cisco offers a complete portfolio of IP
telephony and other unified communications products designed for small businesses, and Cisco 250 Series
switches have been rigorously tested to help ensure easy integration and full compatibility with these and
other vendor products.

Features and benefits

Cisco 250 Series Smart Switches provide all of the features you need to create a basic business-class network at
an affordable price. These features include:

● Easy configuration and management: Cisco 250 Series switches are designed to be easy to deploy and
use by small businesses or the partners that serve them:
◦ Smart Network Application (SNA) is an innovative network-level monitoring and management tool
embedded in the Cisco 100 to 500 Series switches. It can discover network topology, display link status,
monitor events, apply configurations, and upgrade software images across multiple switches in the
network.
◦ The FindIT Network Manager and Probe are designed to manage Cisco 100 to 500 Series switches,
routers, and wireless access points. They let you proactively manage the network instead of just reacting
to events. Cisco 250 Series switches support the embedded FindIT Network Probe, eliminating the need
to set up a separate hardware or virtual machine on site. For more information, visit
https://www.cisco.com/c/en/us/products/cloud-systems-management/findit-network-
management/index.html.
◦ The FindIT Network Discovery Utility works through a simple toolbar on the user’s web browser to
discover Cisco devices on the network and display basic device information, inventory, and new firmware
updates to aid in the configuration and speed the deployment of Cisco Small Business products. For
more information, visit https://www.cisco.com/c/en/us/products/cloud-systems-management/small-
business-findit-network-discovery-utility/index.html.
◦ Simple or advanced-mode graphic user interfaces reduce the time required to deploy, troubleshoot, and
manage the network. Configuration wizards simplify the most common configuration tasks and provide
the ultimate tool for anyone to set up and manage the network.

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 17
 ◦ Cisco Smartports technology provides more advanced capabilities and hands-on control by automatically
configuring ports with specific levels of security, QoS, and availability according to the type of connected
device, based on Cisco best practices and pretested configurations. The Auto Smartports feature
automatically applies the intelligence delivered through the Smartports roles to the port based on the
device types discovered over Cisco Discovery Protocol or LLDP-MED. This capability facilitates zero-
touch deployments.
◦ The USB port on the front panel of the switch enables easy image and configuration transfer for faster
deployment or upgrades.
● Reliability and performance: Cisco 250 Series switches have been tested to deliver the high performance
and reliability you would expect from a Cisco switch and help you prevent costly downtime. The switches
speed file transfer times, improve slow and sluggish networks, keep your vital business applications
available, and help your employees respond more quickly to customers and each other. With a network
based on Cisco 250 Series switches, you can address all of your business communications and connectivity
needs and reduce the total cost of ownership of your technology infrastructure. Cisco 250 Series switches
also support 10 Gigabit Ethernet uplinks on select models, so you can build a high-performance and future-
ready network to support your thriving business.
● Layer 3 static routing: This capability allows you to segment your network into separate workgroups and
communicate across VLANs without degrading application performance. As a result, you can manage
internal routing with your switches and dedicate your router to external traffic and security, helping your
network run more efficiently.
● Power over Ethernet Plus (PoE+): Cisco 250 Series switches are available with PoE+ on both Fast
Ethernet and Gigabit Ethernet models. This capability simplifies the deployment of IP telephony, wireless,
video surveillance, and other solutions by allowing you to send data and power to network endpoints over
the single network cable, eliminating the need for separate power supplies or outlets. PoE+ provides up to
30W of power per port, enabling deployments for 802.11ac wireless access points, Pan-Tilt-Zoom (PTZ) IP
cameras, videophones, and thin client devices, delivering more flexibility and investment protection.
● PoE powered device and PoE pass-through: The 10-port compact models of Cisco 250 Series can work
as PoE powered devices and draw power from upstream PoE switches in the wiring closet, simplifying the
deployment in meeting rooms, classrooms, hotel rooms, and other flexible locations. Each switch can
accept up to 60W of power per uplink port to power itself and pass through the power to the downstream
PoE end devices if needed.
● Network security: Cisco 250 Series switches provide the security and network management features you
need to maintain a high level of security for your business, keep unauthorized users off the network, and
protect your business data. The switches include integrated network security to reduce the risk of a security
breach, with IEEE 802.1X port security to control access to your network, Denial-of-Service (DoS) attack
prevention to increase network uptime during an attack, and extensive Access Control Lists (ACLs) to
protect sensitive portions of the network from unauthorized users and guard against network attacks.
● IPv6 support: As the IP network addressing scheme evolves to accommodate more devices, you can have
peace of mind that your network is ready. Cisco 250 Series switches provide native support for IPv6
alongside traditional IPv4. With USGv6 and IPv6 Gold Logo certifications, the 250 Series will enable you to
take full advantage of IPv6-enabled operating systems and applications in the future, without having to
upgrade your network equipment.

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 17
 ● IP telephony support: Cisco 250 Series switches include QoS features to prioritize delay-sensitive
services such as voice and video, simplify unified communications deployments, and help ensure consistent
network performance for all services.
● Networkwide automatic voice deployment: Using a combination of Cisco Discovery Protocol, LLDP-
MED, Auto Smartports, and Voice Services Discovery Protocol (VSDP, a unique, patented Cisco protocol),
customers can deploy an end-to-end voice network dynamically. The switches in the network automatically
converge into a single voice VLAN and set of QoS parameters and then propagate them out to the phones
on the ports where they are discovered. For example, automated voice VLAN capabilities let you plug any
IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone.
The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice
traffic.
● An energy-efficient solution: Cisco 250 Series switches are designed to be energy efficient and eco
friendly without compromising performance. They help conserve energy by optimizing power use, which
helps protect the environment and lowers your energy costs. Power-saving features include:
◦ Support for the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption
by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet
periods
◦ Automatic power shutoff on ports when a link is down
◦ Embedded intelligence to adjust power based on cable length
◦ Fanless design in most models, which reduces power consumption, increases reliability, and provides
quieter operation
◦ Ability to turn off LEDs to conserve power
● Peace of mind and investment protection: Cisco 250 Series switches offer the reliable performance,
investment protection, and peace of mind you expect from a Cisco switch. When you invest in the Cisco 250
Series, you gain the benefits of:
◦ Cisco limited lifetime warranty to protect your investment
◦ Rigorous testing to help ensure easy integration and compatibility with other Cisco networking and
communications products, including the complete Cisco Small Business portfolio
● Limited lifetime warranty: The Cisco 250 Series switches come with the Cisco limited lifetime hardware
warranty, with return-to-factory replacement, software updates for bug fixes for the warranty term, and 1-
year limited warranty for fans and power supplies. In addition, Cisco offers telephone technical support at no
charge for the first 12 months following the date of purchase. To download software updates, go to
https://www.cisco.com/cisco/web/download/index.html.
● World-class support: To extend the support coverage beyond the warranty provisions, choose Cisco
Smart Net Total Care™, which helps you get the most value from Cisco Small Business solutions, providing
peace of mind at an affordable price. Cisco Smart Net Total Care provides a single service platform for all
Cisco networking products. With global coverage, flexible contract terms, and multiple advance hardware
replacement options, this comprehensive service includes software upgrades, access to the Cisco Small
Business Support Center, and extended telephone and online chat support. To learn more, visit
https://www.cisco.com/c/en/us/solutions/small-business/services.html.
To find out where Cisco Small Business Support Service is available by country, go to
https://supportforums.cisco.com/t5/regional-service-support-options/bd-p/4626-discussions-smb-support-
country.

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 17
 ● Multiple language options: The Cisco 250 Series switches are available in multiple languages. Product
documentation and user interfaces are translated, giving you the ability to select your preferred language.

Product specifications
Table 1 describes product specifications.
Table 1. Product specifications

Feature Description
Performance

Switching capacity and Model Capacity in millions of packets per Switching capacity in gigabits per
forwarding rate second (mpps) (64-byte packets) second (Gbps)
All switches are wire-speed and
SF250-24 9.52 12.8
nonblocking
SF250-24P 9.52 12.8

SF250-48 13.10 17.6

SF250-48HP 13.10 17.6

SG250-08 11.90 16.0

SG250-08HP 11.90 16.0

SG250-10P 14.88 20.0

SG250-18 26.78 36.0

SG250-26 38.69 52.0

SG250-26HP 38.69 52.0

SG250-26P 38.69 52.0

SG250-50 74.41 100.0

SG250-50HP 74.41 100.0

SG250-50P 74.41 100.0

SG250X-24 95.23 128.0

SG250X-24P 95.23 128.0

SG250X-48 130.94 176.0

SG250X-48P 130.94 176.0

Layer 2 switching
Spanning Tree Protocol (STP) Standard 802.1d spanning tree support
Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default
Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
● Up to 4 groups
● Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad LAG

VLAN Support for up to 256 active VLANs simultaneously

Port-based and 802.1Q tag-based VLANs
Management VLAN
Guest VLAN
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS.
Auto voice capabilities deliver networkwide zero-touch deployment of voice endpoints and call control
devices
Generic VLAN Registration Protocols for automatically propagating and configuring VLANs in a bridged domain
Protocol (GVRP) and Generic
Attribute Registration Protocol
(GARP)
IGMP (versions 1, 2, and 3) Internet Group Management Protocol (IGMP) limits bandwidth-intensive multicast traffic to only the
snooping requesters; supports 4K multicast groups (source-specific multicasting is also supported)

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 17
 Feature Description

IGMP querier Used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
HOL blocking Head-Of-Line (HOL) blocking

Loopback detection Provides protection against loops by transmitting loop protocol packets out of ports on which loop protection
has been enabled. It operates independently of STP
Layer 3 routing

IPv4 routing Wire-speed routing of IPv4 packets

Up to 32 static routes and up to 16 IP interfaces
IPv6 routing Wire-speed routing of IPv6 packets

Layer 3 interface Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface
Classless Interdomain Routing Support for CIDR
(CIDR)

DHCP relay at Layer 3 Relay of DHCP traffic across IP domains

User Datagram Protocol (UDP) Relay of broadcast information across Layer 3 domains for application discovery or relaying of bootP/DHCP
relay packets
Security
SSL Secure Sockets Layer (SSL) encrypts all HTTPS traffic, allowing secure access to the browser-based
management GUI in the switch
Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy (SCP) also uses SSH. SSH v1 and v2 are
supported
IEEE 802.1X (authenticator role) RADIUS authentication, guest VLAN, single/multiple host mode, and single/multiple sessions
Secure Core Technology (SCT) Ensures that the switch will receive and process management and protocol traffic no matter how much traffic
is received
Secure Sensitive Data (SSD) A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch,
populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plaintext or
encrypted is provided according to the user-configured access level and the access method of the user
Port security Ability to lock source MAC addresses to ports and limit the number of learned MAC addresses

RADIUS Supports RADIUS authentication for management access. Switch functions as a client
Storm control Broadcast, multicast, and unknown unicast
DoS prevention Denial-of-Service (DoS) attack prevention

Access Control Lists (ACLs) Support for up to 512 rules

Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated
services code point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet
type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
Quality of service
Priority levels 8 hardware queues
Scheduling Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and class of service
(802.1p/CoS)
Class of service Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP based;
Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS
Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based
Congestion avoidance A TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization
Standards
Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T
Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE
802.3x Flow Control, IEEE 802.3 ad LACP, IEEE 802.1D (STP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP,
IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, RFC 768,
RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC
856, RFC 858, RFC 894, RFC 919, RFC 920, RFC 922, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC
1123, RFC 1141, RFC 1155, RFC 1157, RFC 1213, RFC 1215, RFC 1286, RFC 1350, RFC 1442, RFC
1451, RFC 1493, RFC 1533, RFC 1541, RFC 1542, RFC 1573, RFC 1624, RFC 1643, RFC 1700, RFC
1757, RFC 1867, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2030, RFC 2131, RFC 2132, RFC
2233, RFC 2576, RFC 2616, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC
2863, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 3416, RFC 4330

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 17
 Feature Description

IPv6
IPv6 IPv6 host mode
IPv6 over Ethernet
Dual IPv6/IPv4 stack
IPv6 neighbor and Router Discovery (ND)
IPv6 stateless address auto configuration
Path Maximum Transmission Unit (MTU) discovery
Duplicate Address Detection (DAD)
Internet Control Message Protocol (ICMP) version 6
IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) support
USGv6 and IPv6 Gold Logo certified

IPv6 QoS Prioritize IPv6 packets in hardware

IPv6 ACL Drop or rate limit IPv6 packets in hardware
Multicast Listener Discovery Deliver IPv6 multicast packets only to the required receivers
(MLD v1/2) snooping
IPv6 applications Web/SSL, Telnet server/SSH, Ping, Traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer
Protocol (TFTP), Simple Network Management Protocol (SNMP), Remote Authentication Dial-In User
Service (RADIUS), Syslog, DNS client, DHCP client, DHCP autoconfig
IPv6 RFCs supported RFC 4443 (which obsoletes RFC 2463): ICMPv6
RFC 4291 (which obsoletes RFC 3513): IPv6 address architecture
RFC 4291: IPv6 Addressing Architecture
RFC 2460: IPv6 Specification
RFC 4861 (which obsoletes RFC 2461): Neighbor Discovery for IPv6
RFC 4862 (which obsoletes RFC 2462): IPv6 Stateless Address Autoconfiguration
RFC 1981: Path MTU Discovery
RFC 4007: IPv6 Scoped Address Architecture
RFC 3484: Default address selection mechanism
RFC 5214 (which obsoletes RFC 4214): ISATAP tunneling
RFC 4293; MIB IPv6: Textual Conventions and General Group
RFC 3595: Textual Conventions for IPv6 Flow Label
Management
Web user interface Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports
configuration, wizards, system dashboard, system maintenance, and monitoring
Basic and advanced mode for maximum operational efficiency
Smart Network Application An innovative network-level monitoring and management tool embedded in Cisco 250 to 550X Series
(SNA) switches. It can discover network topology, display link status, monitor events, apply configurations, and
upgrade software images across multiple switches in the network
SNMP SNMP versions 1, 2c, and 3 with support for traps, and SNMP v3 User-based Security Model (USM)
Standard MIBs lldp-MIB rfc2665-MIB
lldpextdot1-MIB rfc2668-MIB
lldpextdot3-MIB rfc2737-MIB
lldpextmed-MIB rfc2925-MIB
rfc2674-MIB rfc3621-MIB
rfc2575-MIB rfc4668-MIB
rfc2573-MIB rfc4670-MIB
rfc2233-MIB trunk-MIB
rfc2013-MIB tunnel-MIB
rfc2012-MIB udp-MIB
rfc2011-MIB draft-ietf-bridge-8021x-MIB
RFC-1212 draft-ietf-bridge-rstpmib-04-MIB
RFC-1215 draft-ietf-hubmib-etherif-mib-v3-00-MIB
SNMPv2-CONF draft-ietf-syslog-device-MIB
SNMPv2-TC ianaaddrfamnumbers-MIB
p-bridge-MIB ianaifty-MIB

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 17
 Feature Description
q-bridge-MIB ianaprot-MIB
rfc1389-MIB inet-address-MIB
rfc1493-MIB ip-forward-MIB
rfc1611-MIB ip-MIB
rfc1612-MIB RFC1155-SMI
rfc1850-MIB RFC1213-MIB
rfc1907-MIB SNMPv2-MIB
rfc2571-MIB SNMPv2-SMI
rfc2572-MIB SNMPv2-TM
rfc2574-MIB RMON-MIB
rfc2576-MIB rfc1724-MIB
rfc2613-MIB dcb-raj-DCBX-MIB-1108-MIB
rfc1213-MIB
rfc1757-MIB
Private MIBs CISCOSB-lldp-MIB CISCOSB-ip-MIB
CISCOSB-brgmulticast-MIB CISCOSB-iprouter-MIB
CISCOSB-bridgemibobjects-MIB CISCOSB-ipv6-MIB
CISCOSB-bonjour-MIB CISCOSB-mnginf-MIB
CISCOSB-dhcpcl-MIB CISCOSB-lcli-MIB
CISCOSB-MIB CISCOSB-localization-MIB
CISCOSB-wrandomtaildrop-MIB CISCOSB-mcmngr-MIB
CISCOSB-traceroute-MIB CISCOSB-mng-MIB
CISCOSB-telnet-MIB CISCOSB-physdescription-MIB
CISCOSB-stormctrl-MIB CISCOSB-PoE-MIB
CISCOSBssh-MIB CISCOSB-protectedport-MIB
CISCOSB-socket-MIB CISCOSB-rmon-MIB
CISCOSB-sntp-MIB CISCOSB-rs232-MIB
CISCOSB-smon-MIB CISCOSB-SecuritySuite-MIB
CISCOSB-phy-MIB CISCOSB-snmp-MIB
CISCOSB-multisessionterminal-MIB CISCOSB-specialbpdu-MIB
CISCOSB-mri-MIB CISCOSB-banner-MIB
CISCOSB-jumboframes-MIB CISCOSB-syslog-MIB
CISCOSB-gvrp-MIB CISCOSB-TcpSession-MIB
CISCOSB-endofmib-MIB CISCOSB-traps-MIB
CISCOSB-dot1x-MIB CISCOSB-trunk-MIB
CISCOSB-deviceparams-MIB CISCOSB-tuning-MIB
CISCOSB-cli-MIB CISCOSB-tunnel-MIB
CISCOSB-cdb-MIB CISCOSB-udp-MIB
CISCOSB-brgmacswitch-MIB CISCOSB-vlan-MIB
CISCOSB-3sw2swtables-MIB CISCOSB-ipstdacl-MIB
CISCOSB-smartPorts-MIB CISCOSB-eee-MIB
CISCOSB-tbi-MIB CISCOSB-ssl-MIB
CISCOSB-macbaseprio-MIB CISCOSB-digitalkeymanage-MIB
CISCOSB-env_mib-MIB CISCOSB-qosclimib-MIB
CISCOSB-policy-MIB CISCOSB-digitalkeymanage-MIB
CISCOSB-sensor-MIB CISCOSB-tbp-MIB
CISCOSB-aaa-MIB CISCOSMB-MIB
CISCOSB-application-MIB CISCOSB-secsd-MIB
CISCOSB-bridgesecurity-MIB CISCOSB-draft-ietf-entmib-sensor-MIB
CISCOSB-copy-MIB CISCOSB-draft-ietf-syslog-device-MIB
CISCOSB-CpuCounters-MIB CISCOSB-rfc2925-MIB
CISCOSB-Custom1BonjourService-MIB CISCO-SMI-MIB
CISCOSB-dhcp-MIB CISCOSB-DebugCapabilities-MIB
CISCOSB-dlf-MIB CISCOSB-CDP-MIB

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 17
 Feature Description
CISCOSB-dnscl-MIB CISCOSB-vlanVoice-MIB
CISCOSB-embweb-MIB CISCOSB-EVENTS-MIB
CISCOSB-fft-MIB CISCOSB-sysmng-MIB
CISCOSB-file-MIB CISCOSB-sct-MIB
CISCOSB-greeneth-MIB CISCO-TC-MIB
CISCOSB-greeneth-MIB CISCO-VTP-MIB
CISCOSB-interfaces-MIB CISCO-CDP-MIB
CISCOSB-interfaces_recovery-MIB

Remote monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for
enhanced traffic management, monitoring, and analysis
IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration

Firmware upgrade Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH
Dual images for resilient firmware upgrades
Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4
source ports can be mirrored to one destination port
VLAN mirroring Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4
source VLANs can be mirrored to one destination port
Dynamic Host Configuration DHCP options facilitate tighter control from a central point (DHCP server), to obtain IP address,
Protocol (DHCP) (options 12, 66, autoconfiguration (with configuration file download), DHCP Relay, and host name
67, 129, and 150)
Secure Copy (SCP) Securely transfers files to and from the switch
Autoconfiguration with SCP file Enables mass deployment with protection of sensitive data
download
Text-editable configs Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass
deployment
Smartports Simplified configuration of QoS and security capabilities

Auto Smartports Automatically applies the intelligence delivered through the Smartports roles to the port based on the devices
discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments
Textview Command-Line Scriptable CLI. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are
Interface (CLI) supported for the CLI
Cloud services Support for Cisco FindIT Network Manager and Cisco Active Advisor
Embedded FindIT Network Support for embedded FindIT Network Probe running on the switch. Eliminates the need to set up a separate
Probe hardware or virtual machine for the FindIT Network Probe on site
Cisco Network Plug and Play The Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease
(PnP) agent new branch or campus device rollouts or for provisioning updates to an existing network. The solution
provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch
deployment experience
Localization Localization of GUI and documentation into multiple languages
Login banner Configurable multiple banners for web as well as CLI
Other management Traceroute; single IP management; HTTP/HTTPS; RADIUS; port mirroring; TFTP upgrade; DHCP client;
Simple Network Time Protocol (SNTP); cable diagnostics; Ping; syslog; Telnet client (SSH secure support);
automatic time settings from Management Station
Green (power efficiency)
Energy detect Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss
of any packets when the switch detects the link is up
Cable length detection Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables
EEE compliant (802.3az) Supports IEEE 802.3az on all copper Gigabit Ethernet ports
Disable port LEDs LEDs can be manually turned off to save on energy
Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up)
Time-based PoE PoE power can be on or off based on user-defined schedule to save energy

General
Jumbo frames Frame sizes up to 9K bytes. The default MTU is 2K bytes
MAC table 8K addresses

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 17
 Feature Description

Discovery
Bonjour The switch advertises itself using the Bonjour protocol

Link Layer Discovery Protocol Link Layer Discovery Protocol (LLDP) allows the switch to advertise its identification, configuration, and
(LLDP) (802.1ab) with LLDP- capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that
MED extensions adds the extensions needed for IP phones

Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its
characteristics using Cisco Discovery Protocol
Product specifications

802.3at PoE+ and 802.3af PoE The following switches support 802.3at PoE+, 802.3af, and Cisco prestandard (legacy) PoE. Maximum
delivered over any of the RJ-45 power of 30.0W to any 10/100 or Gigabit Ethernet port, until the PoE budget for the switch is reached. The
ports within the listed power total power available for PoE per switch is as follows:
budgets
Model Power dedicated to PoE Number of ports that support PoE

SF250-24P 185W 24

SF250-48HP 195W 48

SG250-08HP 45W 8

SG250-10P 62W 8

SG250-26HP 100W 24

SG250-26P 195W 24

SG250-50HP 192W 48

SG250-50P 375W 48

SG250X-24P 195W 24

SG250X-48P 382W 48
PoE Powered Device (PD) and Besides AC power, select compact switch models can work as PoE Powered Device (PD) and be powered
PoE pass-through by PoE switches connected to the uplink ports. The switch can also pass through the power to downstream
PoE end devices if required
Maximum of 60W can be drawn per uplink port if the peer PoE switch supports 60W PoE. When multiple
uplink ports are connected to PoE switches, the power drawn from these ports is combined

When AC power is connected and functioning correctly, it is preferred over PoE power. The PoE power can
function as a backup to the AC power source or be used as the sole power source for the switch

Model Power option Available PoE pass- Can switch be powered with
through power (W) uplinks?

SG250-08 1 x PoE uplink N/A Yes

1 x PoE+ uplink N/A Yes
AC Power N/A Yes

SG250-10P 1 x PoE uplink 0W Yes

2 x PoE uplink 0W Yes
1 x PoE+ uplink 0W Yes
2 x PoE+ uplink 22W Yes
1 x 60W PoE uplink 22W Yes
2 x 60W PoE uplink 50W Yes
AC Power 62W Yes
Power consumption Model Green power (mode) System power Power consumption Heat dissipation
(worst case) consumption (with PoE) (BTU/hr)

SF250-24 EEE, Energy Detect 110V=10.6W – 37.19

220V=10.9W

SF250-24P EEE, Energy Detect 110V=29.2W 110V=238W 812.09

220V=28.3W 220V=230W

SF250-48 EEE, Energy Detect 110V=23.4W – 82.57

220V=24.2W

SF250-48HP EEE, Energy Detect 110V=43.1W 110V=265.2W 904.90

220V=44.3W 220V=255.8W

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 17
 Feature Description

SG250-08 EEE, Energy Detect, 110V=7.6W – 25.93

Short Reach 220V=7.6W

SG250-08HP EEE, Energy Detect, 110V=9.1W 110V=61.4W 209.51

Short Reach 220V=10.1W 220V=59.8W

SG250-10P EEE, Energy Detect, 110V=13.25W 110V=85.19W 290.68

Short Reach 220V=13.42W 220V=84.17W

SG250-18 EEE, Energy Detect, 110V=13.1W – 44.70

Short Reach 220V=13.0W

SG250-26 EEE, Energy Detect, 110V=18.1W – 64.49

Short Reach 220V=18.9W

SG250-26HP EEE, Energy Detect, 110V=23.5W 110V=135.2W 461.32

Short Reach 220V=24.4W 220V=133.9W

SG250-26P EEE, Energy Detect, 110V=34.2W 110V=262W 893.98

Short Reach 220V=37.2W 220V=254.5W

SG250-50 EEE, Energy Detect, 110V=35.2W – 120.79

Short Reach 220V=35.4W

SG250-50HP EEE, Energy Detect, 110V=57.5W 110V=267.2W 911.72

Short Reach 220V=59.3W 220V=263.5W

SG250-50P EEE, Energy Detect, 110V=58.5W 110V=481.9W 1,644.31

Short Reach 220V=60.3W 220V=468.1W

SG250X-24 EEE, Energy Detect, 110V=28.7W – 99.29

Short Reach 220V=29.1W

SG250X-24P EEE, Energy Detect, 110V=46.8W 110V=260.1W 887.50

Short Reach 220V=49.2W 220V=257.1W

SG250X-4 8 EEE, Energy Detect, 110V=46.0W – 156.96

Short Reach 220V=45.6W

SG250X-48P EEE, Energy Detect, 110V=68.4W 110V=502.3W 1,713.92

Short Reach 220V=70.3W 220V=487.1W

Ports Model name Total system ports RJ-45 ports Combo ports (RJ-45 + SFP)

SF250-24 24 Fast Ethernet + 24 Fast Ethernet 2 Gigabit Ethernet combo + 2

4 Gigabit Ethernet SFP

SF250-24P 24 Fast Ethernet + 24 Fast Ethernet 2 Gigabit Ethernet combo + 2

4 Gigabit Ethernet SFP

SF250-48 48 Fast Ethernet + 48 Fast Ethernet 2 Gigabit Ethernet combo + 2

4 Gigabit Ethernet SFP

SF250-48HP 48 Fast Ethernet + 48 Fast Ethernet 2 Gigabit Ethernet combo + 2

4 Gigabit Ethernet SFP

SG250-08 8 Gigabit Ethernet 8 Gigabit Ethernet –

SG250-08HP 8 Gigabit Ethernet 8 Gigabit Ethernet –

SG250-10P 10 Gigabit Ethernet 8 Gigabit Ethernet 2 Gigabit Ethernet combo

SG250-18 18 Gigabit Ethernet 16 Gigabit Ethernet 2 Gigabit Ethernet combo

SG250-26 26 Gigabit Ethernet 24 Gigabit Ethernet 2 Gigabit Ethernet combo

SG250-26HP 26 Gigabit Ethernet 24 Gigabit Ethernet 2 Gigabit Ethernet combo

SG250-26P 26 Gigabit Ethernet 24 Gigabit Ethernet 2 Gigabit Ethernet combo

SG250-50 50 Gigabit Ethernet 48 Gigabit Ethernet 2 Gigabit Ethernet combo

SG250-50HP 50 Gigabit Ethernet 48 Gigabit Ethernet 2 Gigabit Ethernet combo

SG250-50P 50 Gigabit Ethernet 48 Gigabit Ethernet 2 Gigabit Ethernet combo

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 17
 Feature Description

SG250X-24 24 Gigabit Ethernet + 24 Gigabit Ethernet 2 10 Gigabit Ethernet copper +

4 10 Gigabit Ethernet 2 SFP+

SG250X-24P 24 Gigabit Ethernet + 24 Gigabit Ethernet 2 10 Gigabit Ethernet copper +

4 10 Gigabit Ethernet 2 SFP+

SG250X-48 48 Gigabit Ethernet + 48 Gigabit Ethernet 2 10 Gigabit Ethernet copper +

4 10 Gigabit Ethernet 2 SFP+

SG250X-48P 48 Gigabit Ethernet + 48 Gigabit Ethernet 2 10 Gigabit Ethernet copper +

4 10 Gigabit Ethernet 2 SFP+

USB slot USB Type-A slot on the front panel of the switch for easy file and image management
Buttons Reset button
Cabling type Unshielded Twisted Pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5e or better
for 1000BASE-T
LEDs System, Link/Act, PoE, Speed
Flash 256 MB
CPU 800 MHz ARM
CPU memory 512 MB
Packet buffer All numbers are aggregate across all ports because the buffers are dynamically shared:

Model name Packet buffer

SF250-24 12 Mb

SF250-24P 12 Mb

SF250-48 24 Mb

SF250-48HP 24 Mb

SG250-08 12 Mb

SG250-08HP 12 Mb

SG250-10P 12 Mb

SG250-18 12 Mb

SG250-26 12 Mb

SG250-26HP 12 Mb

SG250-26P 12 Mb

SG250-50 24 Mb

SG250-50HP 24 Mb

SG250-50P 24 Mb

SG250X-24 12 Mb

SG250X-24P 12 Mb

SG250X-48 24 Mb

SG250X-48P 24 Mb
Supported SFP/SFP+ modules SKU Media Speed Maximum distance

MGBBX1 Single-mode fiber 1000 Mbps 10 km

MGBSX1 Multimode fiber 1000 Mbps 500 m

MGBLH1 Single-mode fiber 1000 Mbps 40 km

MGBLX1 Single-mode fiber 1000 Mbps 10 km

MGBT1 UTP cat 5e 1000 Mbps 100 m

GLC-LH-SMD= Single-mode fiber 1000 Mbps 10 km

GLC-BX-U= Single-mode fiber 1000 Mbps 10 km

SFP-H10GB-CU1M Copper coax 10 Gig 1m

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 17
 Feature Description

SFP-H10GB-CU3M Copper coax 10 Gig 3m

SFP-H10GB-CU5M Copper coax 10 Gig 5m

SFP-10G-SR Multimode fiber 10 Gig 26 m - 400 m

SFP-10G-LR Single-mode fiber 10 Gig 10 km

SFP-10G-SR-S Multimode fiber 10 Gig 26 m - 400 m

SFP-10G-LR-S Single-mode fiber 10 Gig 10 km

Environmental
Unit dimensions (W x H x D) Model name Unit dimensions

SF250-24 440 x 44 x 202 mm (17.3 x 1.45 x 7.95 in)

SF250-24P 440 x 44 x 257 mm (17.3 x 1.45 x 10.12 in)

SF250-48 440 x 44 x 257 mm (17.3 x 1.45 x 10.12 in)

SF250-48HP 440 x 44 x 350 mm (17.3 x 1.45 x 13.78 in)

SG250-08 160 x 30 x 128 mm (6.3 x 1.18 x 5.04 in)

SG250-08HP 160 x 30 x 128 mm (6.3 x 1.18 x 5.04 in)

SG250-10P 280 x 44 x 170 mm (11.0 x 1.45 x 6.69 in)

SG250-18 440 x 44 x 202 mm (17.3 x 1.45 x 7.95 in)

SG250-26 440 x 44 x 202 mm (17.3 x 1.45 x 7.95 in)

SG250-26HP 440 x 44 x 257 mm (17.3 x 1.45 x 10.12 in)

SG250-26P 440 x 44 x 257 mm (17.3 x 1.45 x 10.12 in)

SG250-50 440 x 44 x 257 mm (17.3 x 1.45 x 10.12 in)

SG250-50HP 440 x 44 x 350 mm (17.3 x 1.45 x 13.78 in)

SG250-50P 440 x 44 x 350 mm (17.3 x 1.45 x 13.78 in)

SG250X-24 440 x 44 x 257 mm (17.3 x 1.45 x 10.12 in)

SG250X-24P 440 x 44 x 257 mm (17.3 x 1.45 x 10.12 in)

SG250X-48 440 x 44 x 257 mm (17.3 x 1.45 x 10.12 in)

SG250X-48P 440 x 44 x 350 mm (17.3 x 1.45 x 13.78 in)

Unit weight Model name Unit weight

SF250-24 2.72 kg (6 lb)

SF250-24P 4.1 kg (9.04 lb)

SF250-48 3.57 kg (7.87 lb)

SF250-48HP 4.93 kg (10.87 lb)

SG250-08 0.54 kg (1.19 lb)

SG250-08P 0.56 kg (1.23 lb)

SG250-10P 1.2 kg (2.65 lb)

SG250-18 2.08 kg (4.59 lb)

SG250-26 2.72 kg (6.0 lb)

SG250-26HP 3.37 kg (7.43 lb)

SG250-26P 3.81 kg (8.40 lb)

SG250-50 2.94 kg (6.48 lb)

SG250-50HP 4.8 kg (10.58 lb)

SG250-50P 4.82 kg (10.63 lb)

SG250X-24 2.66 kg (5.86 lb)

SG250X-24P 3.86 kg (8.51 lb)

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 13 of 17
 Feature Description

SG250X-48 3 kg (6.61 lb)

SG250X-48P 4.84 kg (10.67 lb)

Power 100 to 240V 50 to 60 Hz, internal, universal: SF250-24, SF250-24P, SF250-48, SF250-48HP, SG250-26,
SG250-26HP, SG250-26P, SG250-50, SG250-50HP, SG250-50P, SG250X-24, SG250X-24P, SG250X-48,
SG250X-48P
100 to 240V 50 to 60 Hz, external: SG250-08, SG250-08HP, SG250-10P
Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A

Operating temperature 32° to 122°F (0° to 50°C)

Storage temperature -4° to 158°F (-20° to 70°C)
Operating humidity 10% to 90%, relative, noncondensing

Storage humidity 10% to 90%, relative, noncondensing

Acoustic noise and Mean Time Model name Fan (number) Acoustic noise MTBF at 50°C (hours)
Between Failures (MTBF)
SF250-24 No fan – 630,719

SF250-24P 2 0° to 25°C: 39.7dB 314,040

50°C: 52.2dB

SF250-48 No fan – 256,281

SF250-48HP 2 0° to 30°C: 38.0dB 286,555

50°C: 52.7dB

SG250-08 No fan – 1,305,509

SG250-08HP No fan – 506,682

SG250-10P No fan – 205,647

SG250-18 No fan – 1,425,277

SG250-26 No fan – 343,592

SG250-26HP 1 0° to 30°C: 37.5dB 333,792

50°C: 49.7dB

SG250-26P 2 0° to 30°C: 36.0dB 430,341

50°C: 53.7dB

SG250-50 1 0° to 30°C: 35.1dB 134,933

50°C: 47.5dB

SG250-50HP 2 0° to 30°C: 34.2dB 62,607

50°C: 47.3dB

SG250-50P 4 0° to 30°C: 35.6dB 53,839

50°C: 50.2dB

SG250X-24 1 0° to 30°C: 32.6dB 130,255

50°C: 44.9dB

SG250X-24P 2 0° to 30°C: 35.1dB 62,949

50°C: 46.2dB

SG250X-48 2 0° to 30°C: 36.6dB 68,585

50°C: 49.3dB

SG250X-48P 4 0° to 30°C: 35.9dB 53,722

50°C: 50.6dB
Warranty Limited lifetime

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 14 of 17
 Feature Description

Package contents
● Cisco 250 Series Smart Switch
● Power cord (power adapter for 8-port and 10-port SKUs)
● Mounting kit
● Quick Start Guide

Minimum requirements
● Web browser: Mozilla Firefox version 36 or later; Microsoft Internet Explorer version 9 or later, Chrome version 40 or later, Safari version 5
or later
● Category 5 Ethernet network cable
● TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed

Ordering information
Table 2 provides ordering information.

Table 2. Ordering information

Model name Product order ID number Description

Fast Ethernet
SF250-24 SF250-24-K9-xx ● 24 10/100 ports
● 2 Gigabit copper/SFP combo + 2 SFP ports

SF250-24P SF250-24P-K9-xx ● 24 10/100 PoE+ ports with 185W power budget

● 2 Gigabit copper/SFP combo + 2 SFP ports

SF250-48 SF250-48-K9-xx ● 48 10/100 ports

● 2 Gigabit copper/SFP combo + 2 SFP ports

SF250-48HP SF250-48HP-K9-xx ● 48 10/100 PoE+ ports with 195W power budget

● 2 Gigabit copper/SFP combo + 2 SFP ports

Gigabit Ethernet
SG250-08 SG250-08-K9-xx ● 8 10/100/1000 ports (Port 8 with PoE+ power input support)

SG250-08HP SG250-08HP-K9-xx ● 8 10/100/1000 PoE+ ports with 45W power budget

SG250-10P SG250-10P-K9 ● 8 10/100/1000 PoE+ ports with 62W power budget

● 2 Gigabit copper/SFP combo ports with 60W PoE power input support

SG250-18 SG250-18-K9-xx ● 16 10/100/1000 ports

● 2 Gigabit copper/SFP combo ports

SG250-26 SG250-26-K9-xx ● 24 10/100/1000 ports

● 2 Gigabit copper/SFP combo ports

SG250-26HP SG250-26HP-K9-xx ● 24 10/100/1000 PoE+ ports with 100W power budget

● 2 Gigabit copper/SFP combo ports

SG250-26P SG250-26P-K9-xx ● 24 10/100/1000 PoE+ ports with 195W power budget

● 2 Gigabit copper/SFP combo ports

SG250-50 SG250-50-K9-xx ● 48 10/100/1000 ports

● 2 Gigabit copper/SFP combo ports

SG250-50HP SG250-50HP-K9-xx ● 48 10/100/1000 PoE+ ports with 192W power budget

● 2 Gigabit copper/SFP combo ports

SG250-50P SG250-50P-K9-xx ● 48 10/100/1000 PoE+ ports with 375W power budget

● 2 Gigabit copper/SFP combo ports

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 15 of 17
 Model name Product order ID number Description

10 Gigabit Ethernet
SG250X-24 SG250X-24-K9-xx ● 24 10/100/1000 ports
● 4 10 Gigabit Ethernet (2 x 10GBase-T + 2 x SFP+)

SG250X-24P SG250X-24P-K9-xx ● 24 10/100/1000 PoE+ ports with 195W power budget

● 4 10 Gigabit Ethernet (2 x 10GBASE-T + 2 x SFP+)

SG250X-48 SG250X-48-K9-xx ● 48 10/100/1000 ports

● 4 10 Gigabit Ethernet (2 x 10GBASE-T + 2 x SFP+)

SG250X-48P SG250X-48P-K9-xx ● 48 10/100/1000 PoE+ ports with 382W power budget

● 4 10 Gigabit Ethernet (2 x 10GBASE-T + 2 x SFP+)

Each combo port has one 10/100/1000 copper Ethernet port and one SFP Gigabit Ethernet slot, with one port active at a time.

The -xx in the product order ID number is a country/region specific suffix. For example, the complete PID of SG250-26 for the
United States is SG250-26-K9-NA. Please refer to the following table for the suffix to use for your country/region.

Table 3. Country/region suffix for product order ID number

Suffix Country/region
-NA USA, Canada, Mexico, Colombia, Chile, and rest of LATAM
-BR Brazil
-AR Argentina
-EU EU, Russia, Ukraine, Israel, UAE, Turkey, Egypt, South Africa, Indonesia, Philippines, Vietnam, Thailand, India, Korea
-UK United Kingdom, Saudi Arabia, Qatar, Kuwait, Singapore, Hong Kong, Malaysia
-AU Australia, New Zealand
-CN China
-IN India
-JP Japan

-KR Korea

The products may also be available in countries or regions not listed above. Not all product models are offered in all
countries/regions. For India, either the -EU or -IN suffix will be used, depending on product models. For Korea, either the -EU or -
KR suffix will be used, depending on product models. Please consult with your local Cisco sales representative or Cisco partner
for more details.

A powerful foundation for the basic business network

As you strive to make your business more competitive and efficient, every dollar counts. Cisco 250 Series Smart
Switches give you just the right the features, performance, and reliability you need, without making you pay for
advanced features you don’t. With Cisco 250 Series switches, you can rest assured that your business applications
and communications tools are resting on a strong technology foundation, so you can focus on achieving your
business goals.

Cisco Capital
Flexible Payment Solutions to Help You Achieve Your Objectives
Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation
and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and
accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware,
software, services and complementary third-party equipment in easy, predictable payments. Learn more.

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 16 of 17
 For more information
To find out more about the Cisco 250 Series switches, visit https://www.cisco.com/c/en/us/products/switches/250-
series-smart-switches/index.html.

Printed in USA C78-737061-05 12/18

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 17 of 17