Concrete Ass
Concrete Ass
Concrete Ass
Name________________________________Signature__________________________
I have read and understood the disclaimer notice on page 2. Digitally sign XXX
Address: ________________________________________________________
City_____________________________State____________Zip______________
Phone:
Home (____) ___________________ Work (____) ______________________
Class/Grade__________________________________
Please circle/check which certification you are applying the course CEU’s.
Water Treatment___ Distribution ___ Collection___ Wastewater Treatment ___
Please pay with your credit card on our website under Bookstore or Buy Now. Or
call us and provide your credit card information.
We will stop mailing the certificate of completion so we need either your fax number or e-
mail address. We will e-mail the certificate to you, if no e-mail address; we will fax it to
you.
DISCLAIMER NOTICE
I understand that it is my responsibility to ensure that this CEU course is either approved or
accepted in my State for CEU credit. I understand State laws and rules change on a
frequent basis and I believe this course is currently accepted in my State for CEU or contact
hour credit, if it is not, I will not hold Technical Learning College responsible. I fully
understand that this type of study program deals with dangerous, changing conditions and
various laws and that I will not hold Technical Learning College, Technical Learning
Consultants, Inc. (TLC) liable in any fashion for any errors, omissions, advice, suggestions
or neglect contained in this CEU education training course or for any violation or injury,
death, neglect, damage or loss of your license or certification caused in any fashion by this
CEU education training or course material suggestion or error or my lack of submitting
paperwork. It is my responsibility to call or contact TLC if I need help or assistance and
double-check to ensure my registration page and assignment has been received and
graded. It is my responsibility to ensure all information is correct and to abide with all rules
and regulations.
State Approval Listing Link, check to see if your State accepts or has pre-
approved this course. Not all States are listed. Not all courses are listed.
Professional Engineers; Most states will accept our courses for credit but we do
not officially list the States or Agencies. Please check your State for approval.
You can obtain a printed version of the course manual from TLC for an additional
$59.95 plus shipping charges.
Grading Information
In order to maintain the integrity of our courses we do not distribute test scores,
percentages or questions missed. Our exams are based upon pass/fail criteria with
the benchmark for successful completion set at 70%. Once you pass the exam,
your record will reflect a successful completion and a certificate will be issued to
you.
For security purposes, please fax or e-mail a copy of your driver’s license and
always call us to confirm we have received your assignment and to confirm your
identity. Thank you…
All downloads are electronically tracked and monitored for security purposes.
Some States and many employers require the final exam to be proctored.
http://www.abctlc.com/downloads/PDF/PROCTORFORM.pdf
2
BASIC CONCRETE ASSIGNMENT 1/1/2018
Basic Concrete Course Answer Key
Name_____________________________
Phone #_______________________________
You are solely responsible to ensure that your State will accept this course
for credit. Did you check with your State agency to ensure this course is
accepted for credit? No refunds.
Multiple Choice. Pick only one answer per question. Select answer according to text, exactly
as in text. Circle, Mark off, underline or Bold the answer.
1. A B C D E F 19. A B C D E F 37. A B C D E F
2. A B C D E F 20. A B C D E F 38. A B C D E F
3. A B C D E F 21. A B C D E F 39. A B C D E F
4. A B C D E F 22. A B C D E F 40. A B C D E F
5. A B C D E F 23. A B C D E F 41. A B C D E F
6. A B C D E F 24. A B C D E F 42. A B C D E F
7. A B C D E F 25. A B C D E F 43. A B C D E F
8. A B C D E F 26. A B C D E F 44. A B C D E F
9. A B C D E F 27. A B C D E F 45. A B C D E F
10. A B C D E F 28. A B C D E F 46. A B C D E F
11. A B C D E F 29. A B C D E F 47. A B C D E F
12. A B C D E F 30. A B C D E F 48. A B C D E F
13. A B C D E F 31. A B C D E F 49. A B C D E F
14. A B C D E F 32. A B C D E F 50. A B C D E F
15. A B C D E F 33. A B C D E F 51. A B C D E F
16. A B C D E F 34. A B C D E F 52. A B C D E F
17. A B C D E F 35. A B C D E F 53. A B C D E F
18. A B C D E F 36. A B C D E F 54. A B C D E F
3
BASIC CONCRETE ASSIGNMENT 1/1/2018
55. A B C D E F 71. A B C D E F 87. A B C D E F
56. A B C D E F 72. A B C D E F 88. A B C D E F
57. A B C D E F 73. A B C D E F 89. A B C D E F
58. A B C D E F 74. A B C D E F 90. A B C D E F
59. A B C D E F 75. A B C D E F 91. A B C D E F
60. A B C D E F 76. A B C D E F 92. A B C D E F
61. A B C D E F 77. A B C D E F 93. A B C D E F
62. A B C D E F 78. A B C D E F 94. A B C D E F
63. A B C D E F 79. A B C D E F 95. A B C D E F
64. A B C D E F 80. A B C D E F 96. A B C D E F
65. A B C D E F 81. A B C D E F 97. A B C D E F
66. A B C D E F 82. A B C D E F 98. A B C D E F
67. A B C D E F 83. A B C D E F 99. A B C D E F
68. A B C D E F 84. A B C D E F 100. A B C D E F
69. A B C D E F 85. A B C D E F
70. A B C D E F 86. A B C D E F
For security purposes, please fax or e-mail a copy of your driver’s license and
always call us to confirm we have received your assignment and to confirm your
identity. Thank you…
4
BASIC CONCRETE ASSIGNMENT 1/1/2018
Please e-mail or fax this survey with your final exam
E-MAIL_________________________________PHONE_____________________
3. Please rate the subject matter on the exam to your actual field or work.
Very Similar 0 1 2 3 4 5 Very Different
5
BASIC CONCRETE ASSIGNMENT 1/1/2018
6
BASIC CONCRETE ASSIGNMENT 1/1/2018
Basic Concrete Training Course Assignment
The Assignment (Exam) is also available in Word on the Internet for your Convenience,
please visit www.ABCTLC.com and download the assignment and e- mail it back to TLC.
You’ll have 90 days from the start of this course to complete in order to receive your
Professional Development Hours (PDHs) or Continuing Education Unit (CEU). A score of 70 %
is necessary to pass this course. We prefer if this exam is proctored. No intentional trick
questions. If you should need any assistance, please email all concerns and the completed
manual to info@tlch2o.com.
We would prefer that you utilize the enclosed answer sheet in the front, but if you are unable to
do so, type out your own answer key. Please include your name and address on your manual
and make copy for yourself. You can e-mail or fax your Answer Key along with the Registration
Form to TLC. (S) Means answer may be plural or singular. Multiple Choice Section, One
answer per question and please use the answer key.
What is Concrete?
1. Concrete is a __________composed mainly of water, aggregate, and cement. Often,
additives and reinforcements are included in the mixture to achieve the desired physical
properties of the finished material. When these ingredients are mixed together, they form a fluid
mass that is easily molded into shape.
A. Rock-like substance D. Hard matrix
B. Electrical conductivity E. Raw material
C. Composite material F. None of the Above
2. Over time, the cement forms a _____________ which binds the rest of the ingredients
together into a durable stone-like material with many uses.
A. Rock-like substance D. Naturally occurring stone
B. All industry specifications E. Hard matrix
C. Concrete F. None of the Above
7
BASIC CONCRETE ASSIGNMENT 1/1/2018
5. ________________used worldwide, ton for ton, is twice that of steel, wood, plastics, and
aluminum combined.
A. Rock-like substance D. The amount of concrete
B. Electrical conductivity E. The finely ground raw material
C. Concrete F. None of the Above
6. ______________ in the modern world is exceeded only by that of naturally occurring water.
A. Cement D. Concrete's use
B. All industry specifications E. Hard matrix
C. Concrete F. None of the Above
Portland Cement
7. Portland cement is the basic ingredient of concrete. Concrete is formed when Portland
cement creates a paste with water that binds with _____________ to harden.
A. Rock-like substance D. Steel, wood, plastics, and aluminum
B. Sand and rock E. The finely ground raw material
C. Concrete F. None of the Above
10. Cement plant laboratories check each step in the manufacture of ___________by frequent
chemical and physical tests. The labs also analyze and test the finished product to ensure that it
complies with all industry specifications. The most common way to manufacture Portland
cement is through a dry method.
A. Cement D. Portland cement
B. All industry specifications E. Hard matrix
C. Concrete F. None of the Above
11. The first step is to quarry the____________, mainly limestone, clay, and other materials.
After quarrying the rock is crushed. This involves several stages. The first crushing reduces the
rock to a maximum size of about 6 inches.
A. Rock-like substance D. Principal raw materials
B. Cement E. The finely ground raw material
C. Concrete F. None of the Above
8
BASIC CONCRETE ASSIGNMENT 1/1/2018
12. The __________ then goes to secondary crushers or hammer mills for reduction to about 3
inches or smaller. The crushed rock is combined with other ingredients such as iron ore or fly
ash and ground, mixed, and fed to a cement kiln.
A. Cement D. Rock
B. All industry specifications E. Hard matrix
C. Concrete F. None of the Above
13. The large kilns are mounted with the axis inclined slightly from the horizontal. __________
or the slurry is fed into the higher end. At the lower end is a roaring blast of flame, produced by
precisely controlled burning of powdered coal, oil, alternative fuels, or gas under forced draft.
A. Rock-like substance D. Clinker
B. Electrical conductivity E. The finely ground raw material
C. Concrete F. None of the Above
14. As the material moves through the kiln, certain elements are driven off in the form of gases.
The remaining elements unite to form a new substance called ___________.
A. Clinker D. Form of gases
B. Limestone E. Cement
C. Wet process F. None of the Above
15. ____________ comes out of the kiln as grey balls, about the size of marbles.
A. Clinker D. Form of gases
B. Limestone E. Cement
C. Wet process F. None of the Above
16. ______________ is discharged red-hot from the lower end of the kiln and generally is
brought down to handling temperature in various types of coolers. The heated air from the
coolers is returned to the kilns, a process that saves fuel and increases burning efficiency.
A. Clinker D. Form of gases
B. Limestone E. Cement
C. Wet process F. None of the Above
17. After the clinker is cooled, cement plants grind it and mix it with small amounts
of__________ . Cement is so fine that 1 pound of cement contains 150 billion grains.
A. Clinker D. Form of gases
B. Limestone E. Gypsum and limestone
C. Wet process F. None of the Above
18. The ______________ is now ready for transport to ready-mix concrete companies to be
used in a variety of construction projects.
A. Clinker D. Form of gases
B. Limestone E. Cement
C. Wet process F. None of the Above
19. Although the dry process is the most modern and popular way to manufacture cement,
some kilns in the United States use a wet process. The two processes are essentially alike
except in the wet process, the _____________are ground with water before being fed into the
kiln.
A. Clinker D. Raw material(s)
B. Limestone E. Cement
C. Wet process F. None of the Above
9
BASIC CONCRETE ASSIGNMENT 1/1/2018
Composition of Concrete
20. ____________ available, created by varying the proportions of the main ingredients below.
In this way or by substitution for the cementitious and aggregate phases, the finished product
can be tailored to its application with varying strength, density, or chemical and thermal
resistance properties.
A. Portland cement D. Chemical admixture(s)
B. Water E. Reinforcement(s)
C. There are many types of concrete F. None of the Above
21. "_____________ " consists of large chunks of material in a concrete mix, generally coarse
gravel or crushed rocks such as limestone, or granite, along with finer materials such as sand.
A. Mix design D. Aggregate
B. Fly ash E. Binder for the aggregate
C. Concrete F. None of the Above
22. "_______________", most commonly Portland cement is associated with the general term
"concrete." A range of materials can be used as the cement in concrete. One of the most
familiar of these alternative cements is asphalt.
A. Portland cement D. Chemical admixture(s)
B. Cement E. Reinforcement(s)
C. Thermal resistance F. None of the Above
23. Other cementitious materials such as fly ash and slag cement, are sometimes added to
________________ and become a part of the binder for the aggregate.
A. Mix design D. Portland cement
B. Fly ash E. Binder for the aggregate
C. Concrete F. None of the Above
24. Water is then mixed with this_________, which produces a semi-liquid that workers can
shape (typically by pouring it into a form).
A. Portland cement D. Chemical admixture(s)
B. Dry composite E. Reinforcement(s)
C. Thermal resistance F. None of the Above
25. The concrete solidifies and hardens through a chemical process called hydration. The water
reacts with the cement, which bonds the other components together, creating___________.
A. Mix design D. A robust stone-like material
B. Fly ash E. Binder for the aggregate
C. Concrete F. None of the Above
26. "__________________" are added to achieve varied properties. These ingredients may
speed or slow down the rate at which the concrete hardens, and impart many other useful
properties including increased tensile strength and water resistance.
A. Portland cement D. Chemical admixture(s)
B. Chemical mixtures E. Reinforcement(s)
C. Thermal resistance F. None of the Above
10
BASIC CONCRETE ASSIGNMENT 1/1/2018
27. "Reinforcements" are often added to _________.
A. Mix design D. Hydration
B. Fly ash E. Binder for the aggregate
C. Concrete F. None of the Above
28. _______________can be formulated with high compressive strength, but always has lower
tensile strength. For this reason it is usually reinforced with materials that are strong in tension
(often steel).
A. Mix design D. Chemical process called hydration
B. Fly ash E. Binder for the aggregate
C. Concrete F. None of the Above
29. "_________________" are becoming more popular in recent decades. The use of recycled
materials as concrete ingredients has been gaining popularity because of increasingly stringent
environmental legislation, and the discovery that such materials often have complementary and
valuable properties.
A. Portland cement D. Chemical admixture(s)
B. Mineral admixtures E. Reinforcement(s)
C. Thermal resistance F. None of the Above
30. The most conspicuous of these are fly ash, a by-product of coal-fired power plants, and
silica fume, a byproduct of industrial electric arc furnaces. The use of these materials in
concrete reduces the amount of resources required, as the ______________act as a cement
replacement.
A. Mix design D. Hydration
B. Fly ash E. Binder for the aggregate
C. Ash and fume F. None of the Above
32. The ___________ depends on the type of structure being built, how the concrete is mixed
and delivered, and how it is placed to form the structure.
A. Mix design D. Chemical process called hydration
B. Fly ash E. Binder for the aggregate
C. Concrete F. None of the Above
Water
33. Combining water with a _______________forms a cement paste by the process of
hydration. The cement paste glues the aggregate together, fills voids within it, and makes it flow
more freely.
A. Chemical admixture(s) D. Composite material
B. Cementitious material E. Cement paste
C. Concrete mixture(s) F. None of the Above
11
BASIC CONCRETE ASSIGNMENT 1/1/2018
34. A lower water-to-cement ratio yields a stronger, more durable concrete, whereas more
water gives a freer-flowing concrete with a higher slump. _________used to make concrete can
cause problems when setting or in causing premature failure of the structure.
A. Chemical admixture(s) D. Composite material
B. Exposed aggregate(s) E. Cement paste
C. Concrete mixture(s) F. None of the Above
35. Hydration involves many different reactions, often occurring at the same time. As the
reactions proceed, the products of the cement hydration process gradually bond together the
individual sand and gravel particles and other components of the concrete to form
_____________.
A. Aggregate(s) D. Cementitious material
B. A solid mass E. Reinforced concrete
C. Strength gradients F. None of the Above
Aggregates
36. ______________make up the bulk of a concrete mixture. Sand, natural gravel, and crushed
stone are used mainly for this purpose.
A. Fine and coarse aggregates D. Composite material
B. Exposed aggregate(s) E. Cement paste
C. Concrete mixture(s) F. None of the Above
37. ________(from construction, demolition, and excavation waste) are increasingly used as
partial replacements of natural aggregates, while a number of manufactured aggregates,
including air-cooled blast furnace slag and bottom ash are also permitted.
A. Aggregate(s) D. Cementitious material
B. Recycled aggregates E. Reinforced concrete
C. Strength gradients F. None of the Above
38. The presence of _____________greatly increases the durability of concrete above that of
cement, which is a brittle material in its pure state. Thus concrete is a true composite material.
A. Chemical admixture(s) D. Aggregate
B. Exposed aggregate(s) E. Cement paste
C. Concrete mixture(s) F. None of the Above
39. Redistribution of ____________ after compaction often creates inhomogeneity due to the
influence of vibration. This can lead to strength gradients.
A. Aggregate(s) D. Cementitious material
B. Hydration E. Reinforced concrete
C. Strength gradients F. None of the Above
40. Decorative stones such as quartzite, small river stones or crushed glass are sometimes
added to the surface of concrete for a decorative "_______________" finish, popular among
landscape designers. In addition to being decorative, exposed aggregate adds robustness to a
concrete driveway.
A. Chemical admixture(s) D. Composite material
B. Exposed aggregate(s) E. Cement paste
C. Concrete mixture(s) F. None of the Above
12
BASIC CONCRETE ASSIGNMENT 1/1/2018
Reinforcement
41. Concrete is strong in compression, as the _____________efficiently carries the
compression load. However, it is weak in tension as the cement holding the aggregate in place
can crack, allowing the structure to fail. Reinforced concrete adds steel reinforcing bars, steel
fibers, glass fibers, or plastic fibers to carry tensile loads.
A. Aggregate(s) D. Cementitious material
B. Hydration E. Reinforced concrete
C. Strength gradients F. None of the Above
Chemical Admixtures
42. _________________ are materials in the form of powder or fluids that are added to the
concrete to give it certain characteristics not obtainable with plain concrete mixes. In normal
use, admixture dosages are less than 5% by mass of cement and are added to the concrete at
the time of batching/mixing.
A. Chemical admixture(s) D. Composite material
B. Exposed aggregate(s) E. Cement paste
C. Concrete mixture(s) F. None of the Above
43. Accelerating ______________are especially useful for modifying the properties of concrete
in cold weather.
A. Air entrainment(s) D. Superplasticizer(s)
B. Accelerating admixture(s) E. Admixtures
C. Defoamer(s) F. None of the Above
44. ______________slow the hydration of concrete and are used in large or difficult pours
where partial setting before the pour is complete is undesirable. Typical polyol retarders are
sugar, sucrose, sodium gluconate, glucose, citric acid, and tartaric acid.
A. Bonding agent(s) D. Retarders
B. Superplasticizer(s) E. Latent hydraulic properties
C. Plasticizer(s) F. None of the Above
45. Air entrainments add and entrain tiny air bubbles in the concrete, which reduces damage
during freeze-thaw cycles, increasing durability. However, entrained air entails a trade off with
strength, as each 1% of air may decrease compressive strength 5%. If too much air becomes
trapped in the concrete as a result of the mixing process, ____________can be used to
encourage the air bubble to agglomerate, rise to the surface of the wet concrete and then
disperse.
A. Air entrainment(s) D. Superplasticizer(s)
B. Accelerating admixture(s) E. Corrosion inhibitor(s)
C. Defoamer(s) F. None of the Above
13
BASIC CONCRETE ASSIGNMENT 1/1/2018
47. ___________ can be used to reduce the water content of a concrete while maintaining
workability and are sometimes called water-reducers due to this use. Such treatment improves
its strength and durability characteristics.
A. Bonding agent(s) D. Portland cement (blended cements)
B. Superplasticizer(s) E. Latent hydraulic properties
C. Plasticizer(s) F. None of the Above
48. ______________ (also called high-range water-reducers) are a class of plasticizers that
have fewer deleterious effects and can be used to increase workability more than is practical
with traditional plasticizers.
A. Air entrainment(s) D. Superplasticizer(s)
B. Accelerating admixture(s) E. Corrosion inhibitor(s)
C. Defoamer(s) F. None of the Above
50. _____________are used to minimize the corrosion of steel and steel bars in concrete.
A. Air entrainment(s) D. Superplasticizer(s)
B. Accelerating admixture(s) E. Corrosion inhibitor(s)
C. Defoamer(s) F. None of the Above
51. ________ are used to create a bond between old and new concrete (typically a type of
polymer) with wide temperature tolerance and corrosion resistance.
A. Bonding agent(s) D. Portland cement (blended cements)
B. Superplasticizer(s) E. Latent hydraulic properties
C. Plasticizer(s) F. None of the Above
52. ______________improve pumpability, thicken the paste and reduce separation and
bleeding.
A. Air entrainment(s) D. Superplasticizer(s)
B. Accelerating admixture(s) E. Corrosion inhibitor(s)
C. Defoamer(s) F. None of the Above
54. ___________s which incorporate limestone, fly ash, blast furnace slag, and other useful
materials with pozzolanic properties into the mix, are being tested and used.
A. Bonding agent(s) D. Portland cement (blended cements)
B. Superplasticizer(s) E. Latent hydraulic properties
C. Plasticizer(s) F. None of the Above
14
BASIC CONCRETE ASSIGNMENT 1/1/2018
55. This development is due to ________ production being one of the largest producers (at
about 5 to 10%) of global greenhouse gas emissions, as well as lowering costs, improving
concrete properties, and recycling wastes.
A. Air entrainment(s) D. Superplasticizer(s)
B. Accelerating admixture(s) E. Cement
C. Defoamer(s) F. None of the Above
56. Fly ash: A by-product of coal-fired electric generating plants, it is used to partially replace
_____________ (by up to 60% by mass).
A. Bonding agent(s) D. Portland cement
B. Superplasticizer(s) E. Latent hydraulic properties
C. Plasticizer(s) F. None of the Above
57. The properties of ___________depend on the type of coal burnt. In general, siliceous fly
ash is pozzolanic, while calcareous fly ash has latent hydraulic properties.
A. Concrete production D. Addition of various additives
B. Water E. Fly ash
C. Superplasticizer(s) F. None of the Above
58. Ground granulated blast furnace slag (GGBFS or GGBS): A by-product of steel production
is used to partially replace ______________(by up to 80% by mass). It has latent hydraulic
properties.
A. Concrete D. Cement
B. Silica fume E. Portland cement
C. Reactive ingredient(s) F. None of the Above
59. Silica fume: A byproduct of the production of silicon and ferrosilicon alloys. Silica fume is
similar to fly ash, but has a particle size 100 times smaller. This results in a higher surface-to-
volume ratio and a much faster pozzolanic reaction. __________is used to increase strength
and durability of concrete, but generally requires the use of superplasticizers for workability.
A. Concrete production D. Addition of various additives
B. Silica fume E. The properties of fly ash
C. Superplasticizer(s) F. None of the Above
60. High reactivity Metakaolin (HRM): Metakaolin produces concrete with strength and
durability similar to concrete made with ____________. While silica fume is usually dark gray or
black in color, high-reactivity metakaolin is usually bright white in color, making it the preferred
choice for architectural concrete where appearance is important.
A. Concrete D. Cement
B. Silica fume E. Aggregate
C. Reactive ingredient(s) F. None of the Above
Concrete Production
61. Concrete production is the process of mixing together the various ingredients—water,
aggregate, cement, and any additives—to produce concrete. _________production is time-
sensitive.
A. Concrete D. Addition of various additives
B. Water E. The properties of fly ash
C. Superplasticizer(s) F. None of the Above
15
BASIC CONCRETE ASSIGNMENT 1/1/2018
62. Once the ingredients are mixed, workers must put the concrete in place before it hardens.
In modern usage, most ____________ production takes place in a large type of industrial facility
called a concrete plant, or often a batch plant.
A. Concrete D. Cement
B. Silica fume E. Aggregate
C. Reactive ingredient(s) F. None of the Above
63. In general usage, concrete plants come in two main types, ready mix plants and central mix
plants. A ready mix plant mixes all the ingredients except water, while a central mix plant mixes
all the ingredients including ____________.
A. Concrete production D. Addition of various additives
B. Water E. Aggregate
C. Superplasticizer(s) F. None of the Above
64. A central mix plant offers more accurate control of the ___________ quality through better
measurements of the amount of water added, but must be placed closer to the work site where
the concrete will be used, since hydration begins at the plant.
A. Concrete D. Cement
B. Silica fume E. Aggregate
C. Reactive ingredient(s) F. None of the Above
65. A concrete plant consists of large storage hoppers for various reactive ingredients like
cement, storage for bulk ingredients like____________, mechanisms for the addition of various
additives and amendments, machinery to accurately weigh, move, and mix some or all of those
ingredients, and facilities to dispense the mixed concrete, often to a concrete mixer truck.
A. Concrete production D. Addition of various additives
B. Water E. Aggregate and water
C. Superplasticizer(s) F. None of the Above
66. ___________is usually prepared as a viscous fluid, so that it may be poured into forms,
which are containers erected in the field to give the concrete its desired shape. There are many
different ways in which concrete formwork can be prepared, such as Slip forming and Steel
plate construction. Alternatively, concrete can be mixed into dryer, non-fluid forms and used in
factory settings to manufacture Precast concrete products.
A. Modern concrete D. Cement
B. Silica fume E. Aggregate
C. Reactive ingredient(s) F. None of the Above
67. There is a wide variety of equipment for processing concrete, from hand tools to heavy
industrial machinery. Whichever equipment builders’ use, however, the objective is to produce
the desired building material; ingredients must be properly mixed, placed, shaped, and retained
within time constraints. Once the mix is where it should be, the curing process must be
controlled to ensure that the _________ attains the desired attributes. During concrete
preparation, various technical details may affect the quality and nature of the product.
A. Concrete D. Cement
B. Silica fume E. Aggregate
C. Reactive ingredient(s) F. None of the Above
16
BASIC CONCRETE ASSIGNMENT 1/1/2018
More on Portland Cement
68. When initially mixed, Portland cement and water rapidly form a gel of tangled chains of
interlocking crystals, and _____________continue to react over time. Initially the gel is fluid,
which improves workability and aids in placement of the material, but as the concrete sets, the
chains of crystals join into a rigid structure, counteracting the fluidity of the gel and fixing the
particles of aggregate in place.
A. HEM Nano concrete D. Quasi-laminar flow of the mixture
B. Separate paste mixing E. Components of the gel
C. Volumetric stability F. None of the Above
69. During curing, the cement continues to react with the residual water in a process of
hydration. In properly formulated concrete, once this curing process has terminated the product
has the desired physical and______________.
A. Uniform mixture(s) D. Cement hydration
B. Residual water E. Chemical properties
C. Premixed paste F. None of the Above
70. Among the qualities typically desired, are mechanical strength, low moisture permeability,
and chemical and______________.
A. HEM Nano concrete D. Quasi-laminar flow of the mixture
B. Separate paste mixing E. Gel of tangled chains of interlocking crystals
C. Volumetric stability F. None of the Above
Mixing Concrete
71. Thorough mixing is essential for the production of _________. For this reason equipment
and methods should be capable of effectively mixing concrete materials containing the largest
specified aggregate to produce uniform mixtures of the lowest slump practical for the work.
A. Uniform mixture(s) D. Cement hydration
B. Residual water E. Uniform, high-quality concrete
C. Premixed paste F. None of the Above
72. Separate ______________ mixing has shown that the mixing of cement and water into a
paste before combining these materials with aggregates can increase the compressive strength
of the resulting concrete.
A. Paste D. Quasi-laminar flow of the mixture
B. Separate paste mixing E. Gel of tangled chains of interlocking crystals
C. Volumetric stability F. None of the Above
73. The paste is generally mixed in a high-speed, shear-type mixer at a w/cm (water to cement
ratio) of 0.30 to 0.45 by mass. ________________ may include admixtures such as
accelerators or retarders, superplasticizers, pigments, or silica fume. The premixed paste is
then blended with aggregates and any remaining batch water and final mixing is completed in
conventional concrete mixing equipment.
A. Uniform mixture(s) D. Cement hydration
B. Residual water E. The cement paste premix
C. Premixed paste F. None of the Above
17
BASIC CONCRETE ASSIGNMENT 1/1/2018
Nano Concrete
74. Is created by______________ , sand and water using a specific consumed power of 30 -
600 watt/kg for a net specific energy consumption of at least 5 kJ/kg of the mix.
A. HEM Nano concrete D. Quasi-laminar flow of the mixture
B. Separate paste mixing E. High-energy mixing (HEM) of cement
C. Volumetric stability F. None of the Above
75. A plasticizer or a superplasticizer is then added to the activated mixture which can later be
mixed with aggregates in a conventional concrete mixer. In the ____________sand provides
dissipation of energy and increases shear stresses on the surface of cement particles.
A. Uniform mixture(s) D. Cement hydration
B. Residual water E. HEM process
C. Premixed paste F. None of the Above
76. The quasi-laminar flow of the mixture characterized with Reynolds number less than 800 is
necessary to provide more effective energy absorption. This results in the increased volume of
water interacting with cement and acceleration of ______________.
A. HEM Nano concrete D. Quasi-laminar flow of the mixture
B. Separate paste mixing E. Gel of tangled chains of interlocking crystals
C. Volumetric stability F. None of the Above
77. The initial natural process of ___________ with formation of colloidal globules about 5 nm
in diameter after 3-5 min of HEM spreads out over the entire volume of cement – water matrix.
HEM is the "bottom-up" approach in Nanotechnology of concrete.
A. Uniform mixture(s) D. Cement hydration
B. Residual water E. Plasticizer or a superplasticizer
C. Premixed paste F. None of the Above
78. The liquid activated mixture is used by itself for casting small architectural details and
decorative items, or foamed (expanded) for_______________.
A. HEM Nano concrete D. Quasi-laminar flow of the mixture
B. Separate paste mixing E. Lightweight concrete
C. Volumetric stability F. None of the Above
Workability
80. Workability is the ability of a fresh (plastic) concrete mix to fill the form/mold properly with
the desired work (vibration) and without reducing the _____________.
A. Water content D. Concrete slump test
B. Concrete's quality E. A relatively wet concrete sample
C. High-flow concrete F. None of the Above
18
BASIC CONCRETE ASSIGNMENT 1/1/2018
81. Workability depends on water content, aggregate (shape and size distribution),
cementitious content and age (level of hydration) and can be modified by adding chemical
admixtures, like ___________________.
A. Superplasticizer D. Water-cement ratio
B. Very low slump E. Cone on the narrow end
C. Slump F. None of the Above
83. The use of an aggregate with an undesirable gradation can result in a very harsh mix
design with a very low slump, which cannot readily be made more workable by addition of
reasonable amounts of__________________.
A. Superplasticizer D. Water-cement ratio
B. Very low slump E. Water
C. Slump F. None of the Above
85. Slump is normally measured by filling an "Abrams cone" with a sample from a fresh batch
of concrete. The cone is placed with the wide end down onto a level, non-absorptive surface. It
is then filled in three layers of equal volume, with each layer being tamped with a steel rod to
consolidate the______________.
A. Layer D. Water-cement ratio
B. Very low slump E. Cone on the narrow end
C. Slump F. None of the Above
86. When the cone is carefully lifted off, the enclosed material slumps a certain amount, owing
to gravity. A relatively dry sample slumps very little, having a slump value of one or two inches
(25 or 50 mm) out of one foot (305 mm). ______________ may slump as much as eight inches.
Workability can also be measured by the flow table test.
A. Water content D. Concrete slump test
B. Concrete's quality E. A relatively wet concrete sample
C. High-flow concrete F. None of the Above
19
BASIC CONCRETE ASSIGNMENT 1/1/2018
88. _______________, like self-consolidating concrete, is tested by other flow-measuring
methods.
A. Water content D. Concrete slump test
B. Concrete's quality E. A relatively wet concrete sample
C. High-flow concrete F. None of the Above
89. One of these methods includes placing the cone on the narrow end and observing how the
mix flows through the cone while it is gradually lifted. After mixing, ______________is a fluid
and can be pumped to the location where needed.
A. Superplasticizer D. Water-cement ratio
B. Very low slump E. Concrete
C. Slump F. None of the Above
Curing
90. In all but the______________, care must be taken to properly cure concrete, to achieve
best strength and hardness. This happens after the concrete has been placed. Cement requires
a moist, controlled environment to gain strength and harden fully. The cement paste hardens
over time, initially setting and becoming rigid though very weak and gaining in strength in the
weeks following. In around 4 weeks, typically over 90% of the final strength is reached, though
strengthening may continue for decades.
A. Curing process D. Moist, controlled environment
B. Least critical applications E. Additional common curing method(s)
C. Structure exploitation F. None of the Above
91. The conversion of calcium hydroxide in the concrete into calcium carbonate from
_____________ over several decades further strengthens the concrete and makes it more
resistant to damage. However, this reaction, called carbonation, lowers the pH of the cement
pore solution and can cause the reinforcement bars to corrode.
A. Absorption of CO2 D. Ill effects of ambient condition(s)
B. Properly curing concrete E. Greater shrinkage cracking
C. Cement pore solution F. None of the Above
93. Abnormally fast drying and shrinkage due to factors such as evaporation from wind during
placement may lead to increased tensile stresses at a time when it has not yet gained sufficient
strength, resulting in ___________________.
A. High-early-strength concrete D. Ill effects of ambient condition(s)
B. Properly curing concrete E. Greater shrinkage cracking
C. Cement pore solution F. None of the Above
94. The early strength of the concrete can be increased if it is kept damp during the curing
process. Minimizing stress prior to______________ .
A. Curing process D. Curing minimizes cracking
B. Hydration E. Additional common curing method(s)
C. Structure exploitation F. None of the Above
20
BASIC CONCRETE ASSIGNMENT 1/1/2018
95. High-early-strength concrete is_________________ , often by increased use of cement that
increases shrinkage and cracking.
A. High-early-strength concrete D. Ill effects of ambient condition(s)
B. Properly curing concrete E. Greater shrinkage cracking
C. Designed to hydrate faster F. None of the Above
96. The strength of concrete changes (increases) for up to three years. It depends on cross-
section dimension of elements and________________ .
A. Curing process D. Conditions of structure exploitation
B. Hydration E. Additional common curing method(s)
C. Structure exploitation F. None of the Above
97. Properly curing concrete leads to increased strength and lower permeability and avoids
cracking where the surface dries out prematurely. Care must also be taken to avoid freezing or
overheating due to the___________. Improper curing can cause scaling, reduced strength, poor
abrasion resistance and cracking.
A. High-early-strength concrete D. Ill effects of ambient condition(s)
B. Properly curing concrete E. Greater shrinkage cracking
C. Exothermic setting of cement F. None of the Above
Properties
98. Concrete has relatively high compressive strength, but much lower_____________ . For
this reason it is usually reinforced with materials that are strong in tension (often steel).
A. Curing process D. Moist, controlled environment
B. Hydration E. Tensile strength
C. Structure exploitation F. None of the Above
99. The _____________ is relatively constant at low stress levels but starts decreasing at
higher stress levels as matrix cracking develops.
A. High-early-strength concrete D. Ill effects of ambient condition(s)
B. Properly curing concrete E. Elasticity of concrete
C. Cement pore solution F. None of the Above
100. Concrete has a very low coefficient of thermal expansion and shrinks as it matures. All
concrete structures crack to some extent, due to shrinkage and tension. Concrete that is
subjected to _________________is prone to creep.
A. Water content D. Long-duration forces
B. Concrete's quality E. A relatively wet concrete sample
C. High-flow concrete F. None of the Above
21
BASIC CONCRETE ASSIGNMENT 1/1/2018