Specification sheet

QSX15-G8
TA Luft Compliant

Description Features
The QSX15-Series is the first heavy-duty Holset HX82 Turbocharging - Wastegated
diesel with 24-valve dual overhead design optimizes operation across the
camshaft technology. Yet it has an torque curve with improved response.
impressive 30% fewer parts than
Integrated Block Design - Integrated fluid
comparable diesels and a utilised design,
circuits replace hoses and eliminate
which eliminates external lube, coolant and
potential leaks.
fuel lines leading to higher reliability for
such a high power output. High-Pressure Fuel Injection - Capable of
over 1,900 bar (28,000 psi) for cleaner,
The 15 litre, six-cylinder QSX15 engine is
more fuel-efficient combustion.
ideally suited to both open and
containerised applications in static or 24-Valve Cylinder Head – Four valves per
portable genset equipment. It can be cylinder for increased power with faster
matched to meet specific duty cycle and response at every rpm.
operating conditions of any genset. Coolpac Integrated Design - Products are
supplied complete with cooling package and
air cleaner kit for a complete power
This equipment has been built
to comply with CE certification package. Each component has been
requirement subject to EU specifically developed and rigorously tested
RoHS exclusion per EU for G-Drive products, ensuring high
2011/65.
performance, durability and reliability.
This engine has been
designed in facilities certified Service and Support - G-Drive products
to ISO9001 and manufactured
in facilities certified to are backed by an uncompromising level of
ISO9001 or ISO9002. technical support and after sales service,
delivered through a world class service
network.

cummins.com
©2019 Cummins Inc. | QSX15-G8 (4/19)
 1500 rpm (50 Hz ratings)
Gross engine output Net engine output Typical generator set output
Standby Prime Base Standby Prime Base Standby (ESP) Prime (PRP) Base (COP)
kWm/BHP kWm/BHP kWe kVA kWe kVA kWe kVA
500/670 444/595 317/425 477/639 426/571 299/400 440 550 400 500 281 351

1800 rpm (60 Hz ratings)

Gross engine output Net engine output Typical generator set output
Standby Prime Base Standby Prime Base Standby (ESP) Prime (PRP) Base (COP)
kWm/BHP kWm/BHP kWe kVA kWe kVA kWe kVA
455/610 414/555 295/395 419/561 383/513 264/354 400 500 360 450 248 310

General engine data

Type 4 cycle, inline, turbocharged, Air-cooled
Bore mm 137.0 mm (5.39 in.)
Stroke mm 169.0 mm (6.65 in.)
Displacement litre 15.0 litre (912 in.3)
Cylinder block Cast iron, 6 cylinder
Battery charging alternator 35 amps
Starting voltage 24 volt, negative ground
Fuel system Direct Injection
Fuel filter Spin-on fuel filters with water separator
Lube oil filter type(s) Spin-on full flow filter
Lube oil capacity (l) 91.0
Flywheel dimensions SAE 1

Coolpac performance data

Cooling system design Air-air Charge Cooled
Coolant ratio 50% ethylene glycol; 50% water
Coolant capacity (l) 42.0
Limiting ambient temp.** (°C) 55
Fan power (kWm) 16
Cooling system air flow (m3/s)** 11.8
Air cleaner type Light duty dry replaceable element with restriction indicator
** @ 13 mm H20

Fuel consumption 1500 (50 Hz) Fuel consumption 1800 (60 Hz)
% kWm BHP L/ph g/kWh % kWm BHP L/ph g/kWh
Standby Power Standby Power
100 500 670 123.0 32.4 100 455 610 107.0 28.4
Prime Power Prime Power
100 444 595 103.0 27.3 100 414 555 97.6 25.8
75 333 447 78.7 20.8 75 311 416 75.2 19.9
50 222 298 54.7 14.5 50 207 278 53.4 14.1
25 111 149 30.3 8 25 104 139 31.8 8.4
Continuous Power Continuous Power
100 317 425 75.7 20 100 295 395 72.7 19.1

cummins.com
©2019 Cummins Inc. | QSX15-G8 (4/19)
Weights and dimensions
Length Width Height Weight (dry)
mm mm mm kg
2269 1332 1669 1658

Ratings definitions

Emergency Standby Limited-Time Running Prime Power (PRP): Base Load (Continuous)
Power (ESP): Power (LTP): Power (COP):
Applicable for supplying Applicable for supplying Applicable for supplying Applicable for supplying
power to varying electrical power to a constant power to varying electrical power continuously to a
load for the duration of electrical load for limited load for unlimited hours. constant electrical load for
power interruption of a hours. Limited-Time Prime Power (PRP) is in unlimited hours. Continuous
reliable utility source. Running Power (LTP) is in accordance with ISO 8528. Power (COP) in accordance
Emergency Standby Power accordance with ISO 8528. Ten percent overload with ISO 8528, ISO 3046,
(ESP) is in accordance with capability is available in AS 2789, DIN6271 and
ISO 8528. Fuel Stop power accordance with ISO 3046, BS 5514.
in accordance with AS 2789, DIN 6271 and
ISO 3046, AS 2789, BS 5514.
DIN 6271 and BS 5514.

For more information contact your local Cummins distributor

or visit cummins.com

©2019 Cummins Inc. All rights reserved. Cummins is a registered trademark of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks of
Cummins Inc. Other company, product, or service names may be trademarks or service marks of others. Specifications are subject to change without notice.
QSX15-G8 (4/19)