Scribd
Upload
138 views3 pages

Motion Activated Power Saving System Using Mems Accelerometer and I2C Protocol

This document discusses the design of a motion activated power saving system using a MEMS accelerometer and I2C protocol. The system is designed in two parts - first to demonstrate the use of a MEMS sensor, and second to control appliances using the sensor data. A MEMS accelerometer is interfaced with a microcontroller using I2C communication. The microcontroller receives sensor data and operates appliances like refrigerators and microwaves based on detected motion. MEMS sensors are now widely used in consumer electronics due to their small size and low cost enabled by micro-electromechanical systems technology.

Uploaded by

Upasana das
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
138 views3 pages

Motion Activated Power Saving System Using Mems Accelerometer and I2C Protocol

This document discusses the design of a motion activated power saving system using a MEMS accelerometer and I2C protocol. The system is designed in two parts - first to demonstrate the use of a MEMS sensor, and second to control appliances using the sensor data. A MEMS accelerometer is interfaced with a microcontroller using I2C communication. The microcontroller receives sensor data and operates appliances like refrigerators and microwaves based on detected motion. MEMS sensors are now widely used in consumer electronics due to their small size and low cost enabled by micro-electromechanical systems technology.

Uploaded by

Upasana das
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

MOTION ACTIVATED POWER SAVING SYSTEM USING MEMS ACCELEROMETER

AND I2C PROTOCOL.

Abstract

The aim of the project is to design and construction of a module for Power saving. The
project was done into 2 parts. The First phase is to demonstrate the application of MEMS. The second
phase of the project attempts controlling appliances are devices.

MEMS sensor is interfaced to micro controller using I2c protocol, microcontroller receives the
data from the mems sensor and process it according to the data from the sensor appliances are operated.
Application are like refrigerators , microwave ovens, Theaters hospitals etc..

MEMS-based sensors are a class of devices that builds very small electrical and
mechanical components on a single chip. MEMS-based sensors are a crucial component in
automotive electronics, medical equipment, smart portable electronics such as cell phones,
PDAs, and hard disk drives, computer peripherals, and wireless devices. These sensors began in
the automotive industry especially for crash detection in airbag systems. Throughout the 1990s to
today, the airbag sensor market has proved to be a huge success using MEMS technology.
MEMS-based sensors are now becoming pervasive in everything from inkjet cartridges to cell
phones. Every major market has now embraced the technology.

Inertial sensors have been used in aircraft and navigation systems for a long time. It is not
until recently that new technology has caused the price and size of gyroscopes and
accelerometers to make them available in consumer electronics. Of particular importance is the
MEMS (micro-electro-mechanical-systems) technology that has allowed small, cheap and robust
sensors to enter the market, ”recent advances in micro-electromechanical system (MEMS)
technologies have enabled inertial sensors to become available on the small size and price scales
associated with such commonplace devices as consumer appliances,. Accelerometers measure
the transactional force encountered due to their acceleration. To convert this to a velocity this
output would need to be integrated once and to convert this to a position, integrated twice.
Accelerometers can use several different technologies, as shown below.

Technology Advantages Disadvantages


High Frequency
Piezoelectric High cost
response
Piezoresistive Very low noise Very high cost
Capacitive Compromise - Medium cost/medium noise
Low frequency response
Deferential capacitive Low cost
High noise
Block diagram:
drive load
r
MEMS sensor
ATMGA 32 LCD Display

POWER SUPPLY
Project Components

ATMEGA 8 microcontroller

3-axis accelerometer

MAX 232 for serial communication

3.3 volt regulator

Computer with RS232

Relays

You might also like