Scribd Logo
Upload

Welcome to Scribd!

  • 118 views

    Bondmaster Pitch-Catch Probe Adaptor: Getting Started

    Uploaded by

    Saad
    Probes

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bondmaster Pitch-Catch Probe Adaptor: Getting Started

    Uploaded by

    Saad
    118 views6 pages
    Probes

    Original Title

    Probes

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Probes

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    118 views6 pages

    Bondmaster Pitch-Catch Probe Adaptor: Getting Started

    Uploaded by

    Saad
    Probes

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    BondMaster Pitch-Catch Probe Adaptor

    Getting Started

    Intended Use
    The BondMaster Pitch-Catch Probe Adaptor is designed to inspect composite materials. Do not use
    the BondMaster Pitch-Catch Probe Adaptor for any purpose other than its intended use. If the
    equipment is used in a manner not specified by the manufacturer, the protection provided by the
    equipment could be impaired. The BondMaster Pitch-Catch Probe Adaptor is designed to be used
    with the OmniScan Bond Testing C-Scan.

    Instruction Manual
    This document only contains information for starting up the BondMaster Pitch-Catch Probe Adaptor.
    The OmniScan Bond Testing C-scan— User’s Guide (P/N: DMTA-20023-01EN) contains complete and
    essential information on how to use the equipment safely and effectively. Before using the equipment,
    thoroughly review the User’s Guide and use the product as instructed. Keep the User’s Guide in a safe
    and accessible location.

    Safety Signal Words

    Indicates an imminently hazardous situation calling attention to a procedure, practice, or the like,
    which, if not correctly performed or adhered to, could result in death or serious personal injury.

    Indicates a potentially hazardous situation calling attention to a procedure, practice, or the like, which,
    if not correctly performed or adhered to, could result in death or serious personal injury.

    Indicates a potentially hazardous situation calling attention to a procedure, practice, or the like, which,
    if not correctly performed or adhered to, could result in minor or moderate personal injury, material
    damage, particularly to the product, destruction of part or all of the product, or loss of data.

    Environment Requirements and Certifications


    • CE 61010-1
    • Designed to meet IP50 environmental rating when connected on both ends. IP50 means that the
    equipment has limited dust ingress protection, but no protection from water ingress. Do not
    immerse the adaptor in water or expose to liquids.
    • Rust-free
    • RoHS compliant

    BondMaster Pitch-Catch Probe Adaptor — Getting Started 1


    • WEEE

    BondMaster Pitch-Catch Probe Adaptor Specifications


    This section describes the specifications of the probe adaptor for use with the OmniScan Bond Tester
    C-scan complete solution. See Figure 1, Table 1 on page 2, and Table 2 on page 3 for more information.

    BondMaster Pitch-Catch Probe Adaptor

    Figure 1 The universal adaptor on the complete solution

    Table 1 Specifications

    General parameters

    Size 92 mm × 39 mm × 32 mm

    Operating temperature 0 °C to 50 °C

    Storage temperature –20 °C to 70 °C

    Cross-talk isolation between >60 dB


    transmitter and receiver

    Bandwidth of system (–3 dB) 2 kHz to 100 kHz

    Altitude Up to 2,000 m

    Relative humidity 80 % RH at 40° non condensing, indoor use

    Input ±10 V, 25 mA

    Transmitter specifications

    Gain 9.5 dB ±0.5 dB

    Max. voltage output 36 Vpp

    Distortion < –35 dB / 2 kΩ

    2 BondMaster Pitch-Catch Probe Adaptor — Getting Started


    Table 1 Specifications (continued)

    Output impedance 33 Ω

    Number of transmitter 1

    Bandwidth 2 kHz to 100 kHz (–1 dB)

    Max. voltage input (indoor use) 12 Vpp

    Receiver specifications

    Gain 0 dB

    Input impedance 465 kΩ to 1 MΩ // 15 pF

    Output impedance <5Ω

    Absolute max. voltage input 20 Vpp

    Analog filter 2 kHz second-order high pass

    Output noise < 40 nV/sqrt (Hz)

    Bandwidth 2 kHz to 100 kHz (–3 dB)

    Number of receiver 1

    Table 2 General specifications for universal probe

    Product part number OMNI-A-ADP21

    Version A

    Adaptor type Pitch-Catch probe

    Feature N/A

    Label
    Please refer to Figure 2 and Table 3 on page 4 for more information.

    Figure 2 Label on the universal adaptor

    BondMaster Pitch-Catch Probe Adaptor — Getting Started 3


    Table 3 Description of label information

    Product name BondMaster Pitch-Catch Probe Adaptor

    M/N This is the model number.

    ON indicator This indicator is green when the adaptor is connected and


    operating.

    Manufacturer This indicates the manufacturer of the adaptor, its mailing


    address and website address.

    The CE marking is a declaration that this product


    conforms to all the applicable directives of the European
    Community. See the Declaration of Conformity for details.

    The WEEE symbol indicates that the product must not be


    disposed of as unsorted municipal waste, but should be
    collected separately.

    Setup Information
    The probe is connected to the OmniScan MX ECA/ECT module through the BondMaster Pitch-Catch
    Probe Adaptor. This adaptor allows you to use a BondMaster probe with the Bondmaster C-scan
    complete solution. Make sure that the adaptor is correctly connected to the probe and OmniScan to
    ensure proper functioning of the solution.

    To connect the adaptor


    1. Connect the adaptor to the 4CH connector on the OmniScan instrument.
    2. Install the probe on the XY Scanner.
    3. Connect the adaptor to the probe connection.
    4. Use the CompactFlash MXB card.
    5. Select the version (if necessary).
    6. The default setup is automatically loaded.

    Casing and Application Module Cleaning


    To clean the casing and acquisition module
    1. Make sure that the instrument is turned off, the power cord is disconnected, and the batteries have
    been removed.
    2. Disconnect all cables and connectors, and make sure that all external ports on the OmniScan have
    been covered with their rubber protectors.
    3. Make sure that the battery compartment door is securely closed, and that an acquisition module
    has been installed on the OmniScan.
    4. To restore the instrument’s original finish, clean the casing and module with a soft cloth.

    Do not immerse in water or expose to liquids. The adaptor is not protected against water ingress.

    4 BondMaster Pitch-Catch Probe Adaptor — Getting Started


    5. To remove persistent stains, use a damp cloth and a mild, soap solution. Do not use abrasive
    products or powerful solvents, which could damage the finish.
    6. After removing the connector protectors, make sure the connectors are dry before anything
    connecting anything to them. Otherwise, dry them with a soft, dry cloth, or allow them to air-dry.

    BondMaster Pitch-Catch Probe Adaptor — Getting Started 5


    Olympus NDT, 48 Woerd Avenue, Waltham, MA 02453, USA
    www.olympus-ims.com
    Printed in Canada • © 2012 by Olympus. All rights reserved.
    All brands are trademarks or registered trademarks of their respective owners and third party 50%
    entities.
    Printed on Rolland Hitech50, which
    DMTA-20026-01EN [U8775252] Rev. A, April 2012 contains 50 % post-consumer fiber.

    BondMaster Pitch-Catch Probe Adaptor — Getting Started

    You might also like