Scribd
Upload
953 views2 pages

Easy Laser Sample Shaft Alignment Report PDF

This shaft alignment report provides measurement data from an alignment check of a pump and motor. It includes distances between measurement points on the stationary pump and movable motor. The vertical offset was within tolerance at -2.5 mils, but the vertical angle of -0.5 mils/inch exceeded the 0.5 mils/inch tolerance. The horizontal offset of -0.5 mils and angle of 0 mils/inch were within specifications.

Uploaded by

fjalzina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
953 views2 pages

Easy Laser Sample Shaft Alignment Report PDF

This shaft alignment report provides measurement data from an alignment check of a pump and motor. It includes distances between measurement points on the stationary pump and movable motor. The vertical offset was within tolerance at -2.5 mils, but the vertical angle of -0.5 mils/inch exceeded the 0.5 mils/inch tolerance. The horizontal offset of -0.5 mils and angle of 0 mils/inch were within specifications.

Uploaded by

fjalzina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Shaft alignment report

Horizontal
Measurement data
File name A1
Measurement date 2014-04-23 08:05:26
Report generated from file A1.2014-04-23 08-05-26.22.User.EAN0.XML
Report generated date 2014-04-23 08:05:30
Operator User
Measurement program Horizontal
Measurement unit mils
Serial no. display/detector 92819 / 900045, 900043
Temperature 80.4 °F (26.9°C )

Distances
S-C 2.75 Inch
S-M 5.50 Inch
M-MF1 1.00 Inch
MF1-MF2 8.00 Inch

Machine data Stationary (S) machine Movable (M) machine


Machine type Pump Motor
Pair of feet 2 2
Locked feet pair N/A N/A
Softfoot measured No No

Thermal compensation Stationary (S) machine Movable (M) machine


Vertical offset - -
Horizontal offset - -
Vertical angle - -
Horizontal angle - -

Tolerance
Offset 2.76 mils Angle 0.50 mils/Inch

Page 1/2
Vertical result

Offset

-2.5
mils
Angle

-0.5
mils/Inch
MF1 MF2
-4.0 -7.5

10
5
0
-5
-10

Horizontal result

Offset

-0.5
mils
Angle

0.0
mils/Inch
MF1 MF2
0.5 2.5

5
2.5
0
-2.5
-5
Notes

Date Signature
Page 2/2

You might also like