Scribd Logo
Upload

Welcome to Scribd!

  • 80 views

    Faststeel: Repair and Rebuild Anything Made of Steel

    Uploaded by

    Raheel Ahmed
    Fast Steel

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Faststeel: Repair and Rebuild Anything Made of Steel

    Uploaded by

    Raheel Ahmed
    80 views2 pages
    Fast Steel

    Original Title

    Fast Steel

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Fast Steel

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    80 views2 pages

    Faststeel: Repair and Rebuild Anything Made of Steel

    Uploaded by

    Raheel Ahmed
    Fast Steel

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Repair and rebuild anything made of steel

    FastSteel
    STEEL-REINFORCED EPOXY PUTTY STICK

    Rebuild...
    • Stripped
    threads
    • Small machine parts
    • The ultimate solution for small or
    • Rust-damaged metal
    emergency repairs
    Form...
    • Easy-to-use and mistake-proof
    • Custom tools, handles
    • Bonds instantly with superior strength
    • Prototype parts
    • Saves hundreds of dollars in repairs
    • Anchor machines
    • Belongs in every toolbox
    Repair...
    • Leaking pipes
    • Ductwork
    • Cracks and voids
    Fills cracks and
    in metal voids in metal!

    Seals leaks in
    pipe joints!

    Repairs engines;
    also rebuilds
    small parts!

    Made in U.S.A.
    3
    MINUTE
    WORK
    FastSteel Steel-Reinforced Epoxy Putty Stick
    LIFE

    Product Description How To Use


    FastSteel is a hand-mixable, non-rusting, steel-reinforced epoxy putty that Before applying, roughen and clean the area to be repaired.
    quickly repairs or rebuilds anything made of steel. After mixing, it forms Wear impervious gloves when mixing or handling uncured
    an industrial-strength polymer compound that can be molded into shapes FastSteel. Then follow these easy steps.
    or used to build up, patch and repair steel components. Each handy stick
    contains pre-measured portions of activator and base throughout — no
    measuring or mixing tools are necessary. The consistency (like modeling
    clay) eliminates drips and runs and facilitates adhesion to the substrate.
    After 60 minutes the application can be drilled, tapped, ground, machined,
    filed, and painted. FastSteel cures to a dark gray metallic color. Suitable for
    interior or exterior use, it is resistant to water, chemicals, and temperature
    extremes. FastSteel contains no VOCs or solvents. It's non-flammable and
    1. Cut 2. Mix 3. Apply
    releases no noxious fumes. It won't shrink or pull away. The unused portion 1. Cut or twist off required amount. Mixed Color
    stays fresh for future use when saved in its original package.
    2. Mix by kneading with gloved fingers to a STEEL GRAY
    Performance Data* uniform color. If mixing is difficult, warm
    SHELF LIFE AT 75°F (24°C) 24 months minimum FastSteel to room temperature or slightly above.
    SHORE D HARDNESS AT FULL CURE (24 hrs) 80 3. Apply to surface to be repaired within 2 minutes of mixing.
    LAP SHEAR TENSILE STRENGTH
    On steel (1" x 1" x 1/16") 900 lbs (6.2 MPa)
    Force into any cracks or holes and strike off excess material,
    COMPRESSIVE STRENGTH 8,000 psi (55 MPa) preferably with a tool moistened with clean water.
    DENSITY 18.5 lb/gal, 2.2 gm/cm3 When applying to a damp, wet or slowly leaking area, work
    SHRINKAGE <1%
    NON-VOLATILE CONTENT 100%
    the mixed material forcefully into the surface and apply pressure
    ELECTRICAL RESISTANCE 30,000 megohms-cm until adhesion begins to take effect.
    DIELECTRIC STRENGTH 300 volts/mil For best results: Use damp fingers for easier mixing
    TEMPERATURE LIMITS
    Continuous -40° to 250°F (-40° to 121°C)
    application, and smooth appearance of the cured compound.
    Intermittent -40° to 300°F (-40° to 149°C) Remove excess material before hardening begins.
    CHEMICAL RESISTANCE Curing: FastSteel has a 3- to 5-minute work life. Functional
    Resistant to hydrocarbons, ketones, alcohols, esters,
    halocarbons, aqueous salt solutions and dilute acids
    cure occurs in 60 minutes.
    and bases. • Contains Epoxy Resin and Tri (dimethylaminomethyl) phenol. Skin and eye
    WA R N I N G

    NOT INTENDED FOR STRUCTURAL APPLICATIONS irritant/sensitizer. Direct product contact may cause allergic reaction in some
    *Not to be used for specification purposes. individuals. Wear impervious gloves when mixing or handling uncured product.
    Avoid contact with eyes. • Inhalation of dust may be harmful; wear dust mask
    Applicable Standards and protective eyewear when sanding cured product. • Ingestion of product
    may be harmful. • KEEP OUT OF REACH OF CHILDREN. • See product insert
    Certified by NSF International to NSF/ANSI Standard 61 for or SDS for additional information.
    drinking water contact.
    Availability Polymeric Systems, Inc., is a part of Whitford
    FastSteel is one in a family of Specialty Epoxy Putties originated and manufactured by Worldwide. For more information, please
    Polymeric Systems, Inc. Also look for QuikCopper,® QuikPlastik,® QuikAluminum,® AquaMend,® contact Polymeric Systems or Whitford Ltd. at:
    QuikWood,® RepairitQuik,® QuikTitanium® and InstaCrete.® Our epoxy putties
    give you the ability to fix just about anything. Polymeric Systems, Inc.
    47 Park Avenue
    Packaging Options Elverson, PA 19520
    FastSteel is available in 3.5" (2 oz) and 7" (4 oz) 888-EPOXY FIX (888-376-9934)
    lengths, individually packaged in a reusable clear Tel: +[1] (610) 286-2500
    plastic tube with trilingual (English, Spanish, French) Email: [email protected]
    instructions and plastic friction top. The display Pop-Up Cardboard Blister
    Website: polymericsystems.com
    carton holds 12 or 24 - 3.5” sticks or 12 - 7” sticks Display Carton Packs In the EU contact:
    (packed 2 display cartons per master carton), or Whitford Ltd.
    bulk-packed 24 sticks per shipper carton. Display cartons are 11 Stuart Road, Manor Park
    also sold separately for refillable, point-of-purchase display. Runcorn, Cheshire, UK WA7 1TH
    3.5" sticks are also available in blister packs (12 per carton); Tel: +[44] (0) 1928 571000
    printer minimum applies. Contact Sales for acrylic display rack Email: [email protected]
    supplier information. Acrylic Website: whitfordww.com
    Display Racks

    NON-WARRANTY: ALL RECOMMENDATIONS, STATEMENTS AND TECHNICAL DATA CONTAINED HEREIN ARE BASED ON TESTS WE BELIEVE TO BE
    RELIABLE AND CORRECT, BUT ACCURACY AND COMPLETENESS OF SAID TESTS ARE NOT GUARANTEED AND ARE NOT TO BE CONSTRUED AS A
    WARRANTY, EITHER EXPRESS OR IMPLIED. USER SHALL RELY ON HIS OWN INFORMATION AND TESTS TO DETERMINE SUITABILITY OF THE PRODUCT
    FOR THE INTENDED USE, AND USER ASSUMES ALL RISK AND LIABILITY RESULTING FROM THIS USE OF THE PRODUCT. MANUFACTURER’S SOLE
    RESPONSIBILITY SHALL BE TO REPLACE THAT PORTION OF THE PRODUCT OF THE MANUFACTURER THAT PROVES TO BE DEFECTIVE.
    MANUFACTURER SHALL NOT BE LIABLE TO THE BUYER OR ANY THIRD PARTY FOR INJURY, LOSS OR DAMAGE DIRECTLY OR INDIRECTLY RESULTING
    FROM USE OF, OR INABILITY TO USE, THE PRODUCT. RECOMMENDATIONS OR STATEMENTS OTHER THAN THOSE CONTAINED IN A WRITTEN
    AGREEMENT SIGNED BY AN OFFICER OF THE MANUFACTURER SHALL NOT BE BINDING UPON THE MANUFACTURER.
    © Polymeric Systems, Inc. 2013 4019-0213

    You might also like