Understanding

in the Humboldt Catalog

Hydrometer Jar Bath
Item Name ASTM D422; AASHTO T88; UNE 103.102
The Humboldt hydrometer jar bath is designed Specifications
to provide a 68°F (20°C) ambient temperature
throughout the unit by using a microproces- This section lists what
sor-based temperature control with integral heater specifications the item
and chiller. The control processor in the H-4239A complies with; ASTM;
provides a consistent bath temperature of 68°F AASHTO; BS; UNE;
Description (20°C) accurate to within 0.1% of input span ±1°F, EN; ISO, etc.
This section describes which makes it an ideal bath for storing hydrom-
the product, which eter jars in accordance with the standards listed
can include how it is above. The Hydrometer bath also can be used for Model Numbers
used; what is included many other processes within a lab and can be set
Lists the different model
with it; dimensions; to maintain temperatures within its temperature
numbers for the item.
features and bene- range of 50°F (10°C) and 120°F (49°C).
This includes different
fits, and any notes or The H-4239A jar bath is fully-insulated and includes
voltages and other infor-
warnings. a circulating pump, which ensures a constant water
mation, such as quantity,
temperature throughout bath. The H-4239A can
packaging, etc. Hum-
accommodate (8) hydrometer jars at a time. All
boldt uses the following
models include a stainless steel shelf, which sup-
suffix codes to differen-
ports specimens while allowing 2" of free circulat-
tiate between different
ing water above and below specimens. Tank vol-
electrical requirements:
ume: 20.5 gallons (77.6 Liters)
120V 60Hz
Bath dimensions: ID: 37"L x 8"W x 16"D
120/220V 50/60Hz .3F
(940 x 203 x 406 mm)
220V 50/60Hz .4F
Overall dimensions: 48"L x 11"W x 19"D
(1220 x 280 x 483 mm) 220V 50Hz .5F
Hydrometer Jar Bath, 120V 60Hz H-4239A 220V 60Hz .2F
Hydrometer Jar Bath, 220V 50/60Hz H-4239A.4F
Shipping wt. 155lbs (70 kg)

CE compliant Shipping weight

Information Bar Calibration available
This section indicates the standard
Repair available
shipping method and weight. It also Ships by truck freight
includes other information like repair Ships by UPS, but incurs dimensional charges
and calibration service availability, as Ships by UPS
well as CE compliance.
 About Us 2

Soil, Field 4

Aggregate 36

Soil, Lab 72

Soil Mechanics 96

www.humboldtmfg.com
1.800.544.7220 • 708.468.6300
[email protected]
Concrete 144

Cement 202
WORLDWIDE DEALER LOCATOR:
Visit our website: and click
CONTACT at the top of the page.
Asphalt 224

Pavement 278

Laboratory 286

Index 335
 About Us
Humboldt Mfg. Co., located in the United
States, is a leading manufacturer and supplier
of construction materials testing equipment.
Our equipment is used extensively throughout
the world for testing soil, concrete, cement,
asphalt and aggregate in construction projects.
These projects include roads; bridges; dams;
earthworks, and buildings. Humboldt is known
for manufacturing high-quality, competitively-
priced equipment designed to comply with
ASTM and AASHTO testing standards,
especially our geotechnical testing equipment,
our nuclear gauge and the nuclear-free,
electrical density gauge.

Facilities Dealer Network

Humboldt is headquartered in a 70,000 sq. ft. facility in Elgin, Humboldt Mfg. Co. products are available worldwide through
IL, as well as a 15,000 sq. ft building located in Raleigh, our dealer network and directly from our factory. In the
NC, which houses Humboldt Scientific, our technical center United States, our products are sold directly to customers
for electronics and software development and location of via our website and sales force, as well as a select group
the manufacture of specific products, such as the nuclear of established dealers. Internationally, Humboldt Mfg. Co.
and electrical density gauges. Humboldt’s Elgin facility sells through an extensive network of experienced and
provides extensive production and warehousing capacity, knowledgeable dealers. To purchase product internationally,
which supports our belief in maintaining a constant stock of you can find a list of our dealers on the contact page of our
products to meet our customers’ demands for the quick and website, www.humboldtmfg.com, or you can request a quote
efficient supply of testing equipment. for equipment through our website’s quote cart system.
History Quality
Humboldt began operations as a manufacturer of cement Humboldt has always been concerned with the quality of
testing equipment in the Humboldt Park neighborhood our products and since 2003, we have maintained a quality
of Chicago, IL — establishing from the beginning, a solid management system in accordance with ISO standards. This
reputation for producing high-quality, scientific products, as standard comprises the constant monitoring and continuous
well as providing excellent customer service. During World improvement of the company’s processes. Today, Humboldt
War II, Humboldt expanded its manufacturing operations is certified to ISO 9001: 2008 standards. Our current
to meet the demand for general laboratory equipment certification can be viewed on our website.
and began manufacturing a line of top-quality labware,
which included Bunsen and high-temperature burners. As Humboldt goes forward, our focus is on the continual
These products were the beginning of Humboldt’s general improvement of our testing equipment and maintaining
laboratory equipment line of laboratory burners, stands and diligent customer service. This effort has resulted in the
clamps. In the past 50 years Humboldt has transformed into development of our high-quality geotechnical equipment
the company we are today, focused on the development, complimented by our advanced testing software modules
manufacturing and distribution of construction materials and the electrical density gauge, a nuclear-free, moisture
testing equipment, though the company still manufacturers and density gauge alternative.
a line of lab burners.

Service
Calibration and Repair
Humboldt provides dependable and economical calibration and
Cleaning concrete
repair services for the following Humboldt or competitors' devices: rebound hammer
before reassembly
• Concrete Air Meters • Pressure Transducers and calibration
• Rebound (Schmidt) Hammers • Beam Breakers
• Load Cells • Penetrometers
• Load Rings • Speedy Moisture Testers
• Displacement Transducers

Each calibration project includes complete inspection and Calibrating a load

ring on a NIST-
documentation of the device prior to calibration. The device is then traceable load
disassembled and/or cleaned, inspected, lubed if required, parts frame
are replaced if necessary and then calibrated. All calibrations are
performed on certified, NIST-traceable, calibrated devices and we
provide the customer with a certificate documenting the calibration.
Concrete air meters are cleaned and repaired as necessary before
calibration. Calibration of air meters follows the ASTM procedure
Load cell
outlined in ASTM C231. calibration matched
For calibration and repair information: to a specific load
frame
[email protected] • 1.800.544.7220

ISO/IEC 17025: 2005 Calibration Facility — 1.800.537.4183

Humboldt also maintains a complete ISO/IEC 17025: 2005 accredited repair and calibration facility
at Humboldt Scientific in our Raleigh, North Carolina location. Here we provide repair and calibra-
tion services for Humboldt nuclear gauges, as well as those of other manufacturers. This location
also performs calibrations on load cells, displacement and pressure transducers
 SOIL-FIELD
Augers . . . . . . . . . . . . . . . . 30-31 Lightweight Deflectometer . . . . . . . . . 16-17
Augers, Sampling. . . . . . . . . . . . . 28-30 Moisture . . . . . . . . . . . . . . . . . 35
CBR, Field . . . . . . . . . . . . . . . . 25Ê Nuclear Gauges . . . . . . . . . . . . . 6-11
Color Chart, Soil . . . . . . . . . . . . . . 33 Penetrometers. . . . . . . . . . . . . . . 27
Compaction Uniformity. . . . . . . . . . . 18-19 Penetrometers, Cone . . . . . . . . . . . . 26
Density . . . . . . . . . . . . . . . . 20-21 Plate Load Testers . . . . . . . . . . . . . 15
Dual-Mass Dynamic Cone Penetrometer . . . . 22-23 Probes . . . . . . . . . . . . . . . . . 30
Dynamic Cone Penetrometer . . . . . . . . . 21 Resistivity . . . . . . . . . . . . . . . . 34
Earth Drill, Augers . . . . . . . . . . . . . 31 Shear Strength. . . . . . . . . . . . . . 22-25
Electrical Density Gauge . . . . . . . . . . 12-14Ê CBR . . . . . . . . . . . . . . . . . 22,25
GeoGauge . . . . . . . . . . . . . . . 18-19Ê Shelby Tubes . . . . . . . . . . . . . . . 32
Guelph Permeameter . . . . . . . . . . . . 33 Water Level . . . . . . . . . . . . . . . . 31
Double Ring Infiltrometer . . . . . . . . . . . 33
6
Nuclear Density Gauge SOIL-FIELD

Nuclear Gauges
Choose from Two,
High-Quality
Gauge Models

Safety and
Radiation

Certification
Classes Learn quickly with these
HS-5001SD
exclusive training courses.

Call 1.800.537.4183
or go to
www.humboldtscientific.com/classes.html

HS-5001EZ

Humboldt Nuclear Gauges are available in two operation as an alternative control method. Our are manufactured with 100% new parts. Hum-
models: the SD and EZ Gauges. The SD Gauge, EZ gauge is easy to operate, easy to power and boldt Scientific also offers gauge calibration and
which provides more efficient operation, data easy to service. The EZ gauge features a menu- repair services and is certified to ISO 17025 and
collection and processing than any other gauge driven control panel with easy-to-use, built-in test NIST-traceable standards in 3 and 5-block calibra-
in its class. Using state-of-the-art technology, the routines and auto features, making testing a quick tions. We also provide leak test analysis services,
SD gauge brings you a host of features aimed at and accurate operation. It also features our innova- rental and disposal services and radiation safety
making your job easier. Featuring a 4.3" touch- tive trigger release handle that eliminates pinched and certification classes.
screen, the SD Gauge provides intuitive operation fingers while providing smooth operation. Unlike
of all gauge operations. It also provides touch pad some competitors, all Humboldt nuclear gauges

Choose from one of four SD configurations: Choose from one of four EZ configurations:

12 x 1 12 x 2 8 x 1 8 x 2 8 x 1 8 x 2 12 x 1 12 x 2
300 25 300 50 200 25 200 50 200
0
00 25 200
0
00 50 300 25 300 50

HS-5001SD121 HS-5001SD122 HS-5001SD081 HS-5001SD082 HS-5001EZ081 HS-5001EZ082 HS-5001EZ121 HS-5001EZ122

Measure to 12" (300mm) depth Measure to 12" (300mm) depth Measure to 8" (200mm) depth Measure to 8" (200mm) depth Measure to 8" (200mm) depth Measure to 8" (200mm) depth Measure to 12" (300mm) depth Measure to 12" (300mm) depth
in 1" (25mm) increments in 2" (50mm) increments in 1" (25mm) increments in 2" (50mm) increments in 1" (25mm) increments in 2" (50mm) increments in 1" (25mm) increments in 2" (50mm) increments

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

NUCLEAR GAUGES
 7
SOIL-FIELD Nuclear Density Gauge

HS-5001SD
Humboldt’s NEW HS-5001SD Moisture/
Density Gauge provides more efficient
operation, data collection and process-
ing than any other gauge in its class.
Using state-of-the-art technology, the
HS-5001SD brings you a host of new fea-
tures aimed at making your job easier.
Featuring a 4.3" touch-screen, the SD
Gauge provides intuitive operation of all
gauge operations. It also provides touch
pad operation as an alternative control
method.

The SD’s versatility allows it to measure

density through direct transmission and
backscatter modes, as well as including thin
lift and trench modes, and moisture deter-
• Touch Screen Control minations. The gauge uses an advanced
micro-processor-based technology to
• WiFi Enabled provide highly-accurate measurements of
density and moisture that are automatically
• GPS Equipped computed for direct readouts of wet den-
sity, dry density, moisture content, percent
of moisture, percent of compaction (Proc-
tor or Marshall), void ratio and air voids.
The SD Gauge complies with all pertinent
standards: ASTM D6938, D2950, C1040
and AASHTO T310 and is calibrated by the
Five-block calibration method.

HS-5001SD

Touch-Screen or Touch Pad— WiFi Enabled —

You have your choice with the Humboldt HS-5001SD The SD gauge can connect to your PC for downloading
Moisture/Density Gauge. The gauge features a 4.3" test results via wireless technology. No more cables and
touch-screen, which provides complete control gauges on your desk. Our wireless function provides a
or you can also use the menu-driven touch pad. reliable and secure connection up to 30 feet.

Easy to Power— USB Port—

The SD Touchscreen Gauge is powered by a The SD gauge also has a USB slot, which provides a
rechargeable NiMH battery, which provides up to convenient way to capture test data and take it with
60 hrs. of runtime. In addition, the gauge can also you, as well as provide an easy way to upgrade the
be powered by six standard AA alkaline batteries. gauge's firmware. Firmware upgrades will be available via
Car charger available. the internet from our website.

GPS— Easy Self Repairs—

The SD Gauge is equipped with GPS, which keeps The SD Gauge's modular design enables it to be serviced
track of the actual location of the measuring device in the field by you, if necessary. No need to send the
to ensure locations and validity of tests. gauge in for repair, we’ll send you the necessary compo-
nents and walk you through any repair procedure.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

NUCLEAR GAUGES
8
Nuclear Density Gauge SOIL-FIELD

HS-5001EZ
Humboldt’s HS-5001EZ Moisture/Density
Gauge is just that — easy. Easy to operate,
easy to power and easy to service. The
EZ gauge features a menu-driven control
panel with easy-to-use, built-in test rou-
tines and auto features, making testing a
quick and accurate operation. It also fea-
tures our innovative trigger release handle
that eliminates pinched fingers while pro-
viding smooth operation.

The EZ’s versatility allows it to measure

density through direct transmission and
backscatter modes, as well as including
thin lift and trench modes, as well as mois-
ture determinations. The gauge uses an
advanced microprocessor-based technol- • EZ Menu-Driven
ogy to provide highly-accurate measure- • Direct Readouts
ments of density and moisture that are
automatically computed for direct read-
• AA batteries
outs of wet density, dry density, moisture (2000hrs)
content, percent of moisture, percent of
compaction (Proctor or Marshall), void
ratio and air voids. The EZ Gauge complies
with all pertinent standards: ASTM D6938,
D2950, C1040 and AASHTO T310 and is
calibrated by the Five-block calibration
method.

HS-5001EZ

Easy to Operate— Easy Self Repairs—

Humboldt’s HS-5001EZ Moisture/Density Gauge is The EZ gauge also uses a modular design, which allows
just that— easy to operate. The EZ gauge features a it to be serviced in the field, if ever necessary. With this
menu-driven control panel with easy-to-use, built-in gauge, you don't have to send it back to the factory for
test routines and auto features, making testing a repairs, we'll send you the necessary components and
quick and accurate operation. walk you through any repair procedure.

Easy to Power—
The EZ is powered by six standard AA alkaline batteries,
which provide up to 2000 hrs of service. No chargers
are needed and you can buy batteries almost anywhere,
including the corner convenience store.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

NUCLEAR GAUGES
 9
SOIL-FIELD Nuclear Density Gauge
Radioactive Materials Data Needed for License Application
Radioactive Material Chemical/Physical Form Maximum Amount
Specifications
Sealed Source Not to exceed 11
Cesium-137
Humboldt 2200064 millicuries per source
Electrical
Sealed Source Not to exceed 44
Americium-241:Be Displays—
Humboldt 2200067 millicuries per source
HS-5001SD: TFT, color LCD with back-light, 16:9, 480 x 272 pixel
Radiological HS-5001EZ: 4 lines x 20 alphanumeric w/ backlit liquid crystal display
Timer Stability: 0.01%
Gamma Source
Power Supply Stability: 0.10%
Material, Type and
Cs-137, 370MBq (10mCi) Power Source—
Amount:
HS-5001SD: NiMH battery (AA battery optional)
Special Form Regis- HS-5001EZ: Six alkaline AA-size batteries
USA/0356/S-96 Rev 12
tration:
Power Consumption—
ANSI and ISO Class: ANSI 77C66535 HS-5001SD: Active—110mA — Battery Life—60 hours runtime Ac-
Neutron Source HS-5001EZ: tive—6.5mA — Battery Life—1400 hours
Material, Type and Main Batteries—Circuit Breaker
Am-241: Be, 1.48GBq (40mCi) Power Protection:
Amount: Regulated Supplies—Short Circuit Proof
Neutron Yield: 70 Knps ±10% LOBAT Alarm and Auto Shutoff for low and dead
Special Form Regis- Low Battery Condition:
CZ/1009/S-96 Rev 1 battery conditions
tration: Remaining Battery Life Automatically Estimated at Power-up
ANSI and ISO Class: ANSI 77C66545 Battery Life
by activating TEST routine
Source
Type: Sealed Source, Special Form Mechanical
Housing: Stainless Steel, Double Encapsulated 14 to 158°F (-10 to 70°C) ambient, 347°F (175°C)
Operating Temperature:
Surface Dose Rates 18.7 mrem/hr Maximum (Neutron and Gamma) Material Surface
Transit (shipping) Storage Temperature: -70 to 185°F (-55 to 85°C)
DOT 7A, Type A, Yellow II Label, O.2 TI
Case
Humidity: 98% without condensation, Rain-Resistant Construction
Measurement: Density at 125 pcf (2000 kg/m3)
Vibration: 0.1" (2.5mm) at 12.5 Hz
Direct Transmission, 6" 15 seconds 1 minute 4 minutes
(150mm) (Fast) (Std.) (Slow) Materials:
Precision, pcf (kg/m3) ±0.5 (8) ±0.25 (4) ±0.13 (2) Shielding: Tungsten Powder Alloy
Chemical Error, pcf (kg/m3) ±1.0 (16) ±1.0 (16) ±1.0 (16) 440C Stainless steel, Induction, heat treated to
Source Rod:
Surface Error, pcf (kg/m3) -0.5 (8) -0.5 (8) -0.5 (8) 55 Rockwell C
Measurement Depth: 2 to 12" (50 to 300mm)
Computer-Machined 6061-T6 Aluminum,
15 seconds 1 minute 4 minutes Gauge Base:
Backscatter, 3.5" (88mm) Hard-Coated and Teflon Impregnated
(Fast) (Std.) (Slow)
Computer-Machined 6061-T6 Aluminum,
Precision, pcf (kg/m3) ±1.0 (16) ±0.5 (8) ±0.25 (4) Post and Frame:
Anodized for Anti-corrosion
Chemical Error, pcf (kg/m3) ±2.5 (40) ±2.5 (40) ±2.5 (40)
Surface Error, pcf (kg/m3) -3.0 (48) -3.0 (48) -3.0 (48) Index Rod: 7075 aluminum, Hard Coated and Teflon Impregnated
Measurement Depth: 3.5" (88mm) Top Shell: Injection-Molded Noryl with Integral Color
Moisture at 10pcf 15 seconds 1 minute 4 minutes
Bearing: Relieved Bronze with Neoprene Seals
(160kg/m3) (Fast) (Std.) (Slow)
Precision, pcf (kg/m3) ±0.5 (8) ±0.25 (4) ±0.13 (2) Screws/Fittings: Stainless Steel and Brass
Surface Error, pcf (kg/m3) -0.25 (4) -0.25 (4) -0.25 (4)
Measurement Depth: 4-8" (100 to 200mm)
Dimensions/Weight
Gauge:
Dimensions (base): 15.75" x 8.66" x 5.5" (400 x 220 x 140mm)
Handle Height: 18" or 21.5" (450 or 550mm)
Weight: 30 lbs (13.6kg)
Reference Standard:
Dimensions: 25" x 7.8" x 3" (350 x 200 x 75mm)
Weight: 10 lbs (4.5kg)
Transit Case:
Dimensions: 31" x 14" x 19.5" (787 x 356 x 495mm)
Weight: 31 lbs (11.8kg)
Accessory Case (loaded):
Dimensions: 19.7" x 9.8" x 5" (500 x 250 x 125mm)
Weight: 16 lbs (7.3kg)
Total Shipping
90 lbs (41kg)
Weight:

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

NUCLEAR GAUGES
10
Nuclear Density Gauge SOIL-FIELD
Tool Set
HS-200112

HS-000185
HS-200313

HS-000176

HS-200152 HS-001057
HS-001067
HS-200127

HS-200145 Leak Test

HS-200130 HS-200153 HS-200541

Nuclear Gauge Tool Set Software and Data Cable (infrared RS232) HS-200177
Tool kit includes: rod guide/scraper plate, drill pin, Cable and software for connecting Humboldt
four-pound hammer, pin extraction tool and zip- Nuclear Gauge to a computer or printer via RS232 Security Seal
pered accessory case. port. For EZ or C models only. Security seal for nuclear density gauge transport
Nuclear Gauge Tool Set HS-200112 Software and Data Cable HS-200313 cases.
Ship wt. 16lbs (7.2kg) Ship wt. 1lb (0.45kg) Security Seal HS-2000185
Ship wt. 0.2lb (0.01kg)
Drill Rod Sign, Caution Radioactive Material
Drill rod used to create hole for Humboldt nuclear 8 x 10" metal sign with Radioactive Symbol and Leak Test Kit
gauges to take reading. Rod measures 0.875" x Caution. Each leak test kit contains all of the materials nec-
20" L. Sign, Caution Radioactive Material HS-001057 essary for users to perform a leak test on sealed
Drill Rod HS-200130 Ship wt. .01lb (0.004kg) source devices. These test kits include analysis
Ship wt. 4lb (1.8kg) Humboldt S/N Label for HS-5001 Cases service from Humboldt. Humboldt Scientific, Inc.
Rod Extraction Tool provides leak test kits and analysis services for
Required serial number plate for gauge case
Tool used to extract drill rod from compacted soil. both portable and fixed nuclear gauges in accor-
Humboldt S/N Label HS-200541
Rod Extraction Tool HS-200145 Ship wt. 0.01lb (0.004kg) dance with Wipe Test Procedures. Humboldt is
Ship wt. 2lb (0.95kg) licensed by the North Carolina Division of Radi-
Transit Label – Yellow II
Scraper Plate/Rod Guide ation Protection license # 092-0750-1 to provide
DOT, Type 7A Radioactive materials transport label
Template Plate used as a locator for driving Drill sealed-source leak testing on any radioactive
required for transporting nuclear density gauges.
Rod into compacted soil, as well as a guide for material with atomic number 3-105 inclusive;
Transit Label – Yellow II HS-200153 and, has National reciprocity recognition. State-
Gauge positioning and a Scraper Plate to level the Ship wt. 0.01lb (0.004kg)
test site. of-the-art leak testing equipment, low cost, and
Cargo Aircraft Only Label
Scraper Plate/Rod Guide HS-200127 prompt turn-around service ensure accurate and
Label that is required when shipping nuclear
Ship wt. 8lbs (3.6kg) convenient measurement of your samples.
gauges by aircraft. This label needs to appear on 2
Hammer, 4 lb., Double-Faced Leak Test Kit, 10-pack HS-200177
sides of the transport case.
Hammer used to drive Drill Rod into compacted Leak Test Kit, 2-pack HS-200185
Cargo Aircraft Only Label HS-001067 Ship wt. 1lb (0.45kg)
soil. Ship wt. 0.01lb (0.004kg)
Hammer, 4 lb., Double-Faced HS-000176 Type A Label
Ship wt. 5lb (2.2kg)
DOT, Type 7A Radioactive materials transport label
required for transporting nuclear density gauges.
Type A Label HS-200152
Ship wt. 0.01lb (0.004kg)

REPAIR AND CALIBRATION

Humboldt maintains a complete ISO/IEC 17025: while maintaining competitive prices. Humboldt
2005 accredited repair and calibration facility at nuclear gauge calibration complies or exceeds
Humboldt Scientific in Raleigh, North Carolina ASTM and AASHTO standards by providing five-
location. Here we provide repair and calibration block calibration for all gauge calibrations. We
our website and we’ll handle the rest. We will
services for Humboldt gauges, as well as those of maintain multiple sets of calibration blocks, which
send you completed shipping papers your gauge
other manufacturers. All services are performed are traceable to master NIST standards. These
will need for shipping to us and directions on how
by experienced and certified technicians with blocks are set up in isolated, temperature-con-
to prepare and pack your gauge for shipment.
over 25 years of experience. Our services are built trolled bays to reduce interference during cal-
We will contact the shipper and have them pick
upon providing fast and reliable turn-around of ibration. Documentation and certificates for
up your gauge from your designated location
your gauge calibration and repairs calibrations conform to NIST procedures and
and ship it back to you when the calibration is
requirements.
completed.
We are now offering our New EaZy shipping pro-
gram. Just fill out the calibration/repair form on www.humboldtscientific.com
www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300
NUCLEAR GAUGES
 11
SOIL-FIELD Nuclear Density Gauge

HS-200820 HS-130512

HS-200800— Boxes include

mounting bracket

HS-130508

Security Restraint for Nuclear Gauge Radiation Alert Monitor 200 Radiation Survey Meter, Analog
Cable security restraint effectively locks contain- The HS-130508 Monitor 200 measures alpha, beta, The HS-130512 survey meter is a compact, general
ment box to vehicle or other structure. One-piece gamma, and x-rays. Its digital display shows read- purpose meter capable of detecting alpha, beta,
cable web drops easily over box and allows user to ings in your choice of CPM, CPS, μSv/hr, mR/hr, gamma, and x-rays over 3 selectable ranges. A red
lock cables directly to containment box closures to or in accumulated counts. It has a digital display, count light flashes and a beep sounds with each
prevent opening, as well as securing the complete a red count light, and a beeper that sounds with event detected. Uses one 9-volt alkaline battery.
box to prevent removal. Web is easily moved from each count detected. Other features include an Battery life is up to 2,000 hours at normal back-
vehicle to vehicle and collapses for easy storage adjustable timer, and selectable alert. With the free ground radiation levels.
when not in use. Allows for visibility of security Observer USB Software Family, you can set com-
0-.5, 0-5, 0-50 mR/hr; 0-500,
labels on case when in use. A minimum of three puter alarms, calibrate your instrument, and down- Operating
0-5,000, 0-50,000 CPM or 0-500
padlocks are required, but not included. load your collected data from the internal memory Range
μSv/hr 0-50 mR/hr.
Security Restraint for Nuclear Gauge HS-200820 for easy reporting. Includes: Carrying Case, Xtreme
Ship wt. 8.4lbs (3.8kg) Gamma 1000 CPM/mR/hr referenced to
Boot, Stand, Mini-USB Cable, Observer USB Soft-
Sensitivity Cs-137
Nuclear Gauge Containment System ware Download, Certificate of Conformance.
±15% of reading (referenced to
The NUX safety containment box is an enhanced Accuracy
mR/hr - .001 (1μR) to 100 mR/hr; Cs-137)
field security system for nuclear gauges. Con-
Operating μSv/hr - .01 to 1000; CPM - 0 to Detects alpha down to 2.5 MeV;
structed of heavy-duty aluminum diamond plate,
Range 350,000; CPS - 0 to 5000; Total/ typical detection efficiency at
the NUX can be securely mounted to a host vehi-
Timer - 1 to 9,999,000 cts. 3.6 MeV is greater than 80%.
cle using the locking hinge pin. The box features a
Gamma 1000 CPM/mR/hr referenced to Detects beta at 50 keV with
titanium series, high-strength lock assembly, which
Sensitivity Cs-137 typical 35% detection efficiency.
provides a secure storage enclosure for your gauge
±10% typical (NIST), ±15% Detects beta at 150 keV with
in its factory protective container. In addition, the Accuracy Energy
maximum 75% typical detection efficien-
NUX tilting feature makes accessing your gauge an Sensitivity
Detects alpha down to 2.5 MeV; cy. Detects gamma and x-rays
easy operation. Help prevent theft, damage, back
typical detection efficiency at down to 10 keV typical through
injuries, misuse of equipment, improper or unau-
3.6 MeV is greater than 80%. the window, 40 keV minimum
thorized access to equipment or other misguided
Detects beta at 50 keV with through the sidewall of the
actions, which may result in unforeseen costs to
typical 35% detection efficiency. detector. Normal background is
your company.
Energy Detects beta at 150 keV with approximately 10-20 CPM.
NOTE: When the metal transportation box is Sensitivity typical 75% detection efficien-
mounted in a vehicle it effectively becomes cy. Detects gamma and x-rays Survey Meter, Analog HS-130512
part of the vehicle. It is not part of the TYPE Survey Meter, Analog, NIST Traceable HS-130512C
down to 10 keV typical through Ship wt. 2lbs (0.9kg)
A package nor is it an overpack as defined by the window, 40 keV minimum
U.S. DOT. Therefore, the mounted transpor- through the case. Normal back-
tation box is not subject to HAZMAT labeling ground is 5-20 CPM.
requirements and no radiation warning markings For Recalibration and NIST-traceable
are required on it. calibration of meters,
Monitor 200 HS-130508
Monitor 200, NIST Traceable HS-130508C contact Humboldt Scientific at:
Nux Case for Humboldt Gauges HS-200800
Ship wt. 2lbs (0.9kg) 1.800.537.4183
Nux Case for Troxler Gauges HS-200802
Nux Case for CPN Gauges HS-200803
Ship wt. 65lbs (29.4kg)

Mounting Bracket
HS-200801
for all NUX Boxes

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

NUCLEAR GAUGES
12
Electrical Density Gauge SOIL-FIELD

ASTM D7698

Electrical Density Gauge

ASTM D7698
The Electrical Density Gauge (EDG) is a nucle- traditional methods, including the nuclear gauge • lightweight and easily transportable
ar-free alternative for determining the moisture and and/or a sand-cone and oven moisture test com- • it is accurate and repeatable with results that
density of compacted soils used in road beds and bination. When conducting a test, the EDG mea- mirror known testing methods
foundations. The EDG is a portable, battery-pow- sures and displays the results for wet and dry The EDG Gauge includes: Console/Case;
ered instrument capable of being used anywhere density, gravimetric moisture content and percent 4-tapered 6" darts; hammer; soil sensor and
without the concerns and regulations associated compaction. cables; dart template, temperature probe, battery
with nuclear safety. Its user-friendly, step-by-step
The advantages of using the EDG are: charger, field verifier, safety glasses.
menu guides the user through each step of the
• it does not require a highly-trained or licensed Electrical Density Gauge H-4114SD.3F
testing procedure and cautions the user when val-
technician, Ship wt. 35lbs (15.8kg)
ues do not correspond to established curves for
the material being tested. • it does not require special handling for shipping
or the regulatory compliance for hazardous
Easy-to-use, the EDG can be used as a construc-
materials
tion aid to monitor day-to-day compaction opera-
tions by providing performance and measurement • it is easy-to-learn and easy-to-use with its step-
results highly comparable to those achieved with by-step menu

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 13
SOIL-FIELD Electrical Density Gauge
Power—
The EDG is powered by a
rechargeable NiMH bat-
tery, which provides up to
60 hrs. of runtime. A car
charger is available, order
H-4114SD.100
GPS—
The EDG is equipped with
GPS, which keeps track
of the actual location of
your measuring device to
ensure locations and valid-
ity of tests.
WIFI-Enabled—
The new EDG gauge can
connect to your PC for
downloading test results
via its wireless technol-
ogy. No more cables and
gauges on your desk. Wire-
less provides a reliable and
secure connection up to 30
feet.
USB Port—
Touch-Screen/Touch Pad— The EDG also has a USB
You have your choice with the new Humboldt H-4114SD EDG. The gauge features a 4.3" touch-screen, slot, which provides a con-
which provides complete control or you can also use the menu-driven touch pad. venient way to capture
test data and take it with
The EDG measures the electrical dielectric prop- tion, the temperature probe, which is inserted into you, as well as provide an
erties and moisture levels of compacted soil using the material being tested ensures accurate results easy way to upgrade the
high, radio frequency traveling between darts by compensating for changes in recorded tem- gauge's firmware. Firm-
driven into the soil being tested. The dart's depth peratures. Similar to nuclear gauges, proctor num- ware upgrades will be
of penetration positively determines the depth of bers for optimum compaction may be input into available via the internet
measurement. Darts are available in 4", 6", 8", the gauge, which would allow for percent compac- from our website.
10" and 12" lengths. In addition, the darts have tion to be automatically calculated and displayed
been designed with a taper, which ensures a con- at the end of each test. The Proctor numbers would
tinual positive contact with the soil for accurate be input into the gauge during the development
measurements. of the soil model. When determined, this value is
During the testing procedure, four tapered elec- entered into the EDG to enable the computation
trodes (darts) are driven into the ground in a cross of percent compaction.
pattern using the supplied template. Between the
two sets of two tapered darts, four point-to-point Specifications
electrical measurements are made and the electri- Wet Density Range typical compacted earth sites range
cal characteristics averaged. The dielectric proper-
Dry Density Accuracy within 3% of standard tests
ties that are measured by the unit are compared
to a “soil model”, which has been developed and Moisture Content Range typical compacted earth sites range
programed into the unit prior to testing. These soil Moisture Content
models are required only once for each soil type. within 2% of standard tests
Accuracy
The soil model is used as a calibration reference
Operating Temperature 0-50°C
during the testing procedure. It is developed by
establishing a curve of measured dielectric prop- Ambient Operating
5-90%, non-condensing
erties for different densities and moisture combi- Humidity
nations of the actual soil to be tested or a similar Power NiMH battery – 6-pack
material. This soil model is used by the unit through Battery Life approx. 60 hrs. of runtime
a proprietary correction algorithm to automatically
Battery Charger 110-240 V 50/60Hz
determine the wet and dry density, gravimetric
moisture content and percent compaction values Dimensions 21" x 17" x 8" (533 mm x 432 mm x 203mm)
for the material being tested. Soil models can be GPS ± 3m
named using the unified soil classifications listed
in the drop-down menu or unique names can be
entered using the alpha-numeric keypad. In addi-

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

14
Electrical Density Gauge SOIL-FIELD
EDG Software
EDG Software will allow you to communicate effort-
lessly with your EDG gauges and only requires min-
imal setup by the user. EDG Software provides a
complete solution for the acquisition, storing, and
presentation of Job and Soil Model data. EDG
Software works in conjunction with Microsoft Excel
to present test data in easy-to-read Excel work-
book format files, which can be evaluated directly
or sent to any computer using Microsoft Excel.
Jobs can be grouped together within projects for
organization and reporting.
EDG Software Features
• Communicate with all your EDG gauges.
• Download Job Data.
• Create customized reports from downloaded job
data.
• Download Soil Model Data.
• Create reports from downloaded soil model
data.
• Upload soil models to any EDG.
• Input proctor data for use in job data or soil
model data.
• View maps of test locations, using Google Earth.
• Time/Date, GPS stamps for each test deter-
mined, this value is entered into the EDG to
enable the computation of percent compaction.
Darts for Electrical Density Gauge
Darts are designed in various lengths to corre-
spond to different lift heights. They can be sold
individually, and (4) are required.
4" (102mm) Dart H-4114.4
6" (152mm) Dart H-4114.6
8" (203mm) Dart H-4114.8
10" (254mm) Dart H-4114.10
12"(305mm) Dart H-4114.12
Shipping wt. 1.5 lbs (.68kg)

Calibration Verifier for EDG

Calibration unit for EDG to carry out verification or
calibration of the EDG.
Calibration Verifier for EDG H-4114.MCU
Shipping wt. 4 lbs (1.8kg)

Replacement Parts Model

Soil sensor with cable H-4114.250
Temperature sensor H-4114.900
AC charger H-4114.600
Cables with clamps (2) H-4114.700

Darts for EDG H-4114.MCU

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 15
SOIL-FIELD Bearing Capacity, Plate Load Testers

HD-4602

HD-4605

HD-4139.3F

Humboldt Plate Bearing Tester Static, Plate Load Tester The HD-4139.3F Plate Load tester features:
ASTM D1194, D1195, D1196 DIN 1834; BS1377 • Handy measuring instrument with extra large
The Humboldt Plate Bearing Tester is a field test The Static Plate Load Test can be utilized in earth- illuminated display, which is easily viewed in all
used for determining the bearing capacity of soil works and foundation engineering, as well as road light conditions and a thermal printer within a
under varying loading conditions. It can also be construction in order to determine load settlement aluminum case
used to evaluate designs of airport and highway lines and by this to evaluate the deformability and • Automatic data transfer, Data-Secure, error-free
pavements. the load capacity of the soil. automatic interpretation
This Plate Bearing Tester consists of a hydraulic jack When using the static load tester to evaluate a soil • intuitive menu navigation with a clearly
complete with hand pump and rubber; fast-con- layer, the circular load plate is repeatedly loaded arranged display
nect hose, large pressure dial gauge; seat plate; and relieved by means of a load device, a hydraulic • Evaluation, displaying and printout immedi-
(3) precision dial gauges (2.5" dia.-1" x 0.0004 (25 pump and pneumatic cylinder. This load is applied ately at the site shows Ev1, Ev2, Ev1/Ev2 and
x 0.01mm); 8' (2.4m) complete mounting hard- to the plate in 6 to 8 equal loading steps. Settle- settlement curve
ware for gauges, Plate Set (HD-4605) and case for ment of the plate is measured by the tester con-
• PC-connection, Software for creation of profes-
gauges, pump and jack. sisting of a carrier frame with a sensing arm and
sional test protocols
The Plate Bearing Tester is available in three (3) dial gauge. As a counterbalance, a heavy-weight
• USB interface for easy data transfer, GPS for
capacities: 100kN, 200kN and 500kN. vehicle is used.
accurate localization of the measuring point
Features: The indentation of the load plate into the soil, gen-
• modular design provides flexibility in use
• Long piston travel to accommodate setup of erated with every load step, is indicated via the dial
gauge. The settlement of every load step and the Static Plate Load Tester HD-4139.3F
reaction loading system
Ship wt. 65lbs (29.4kg)
corresponding mean normal stress below the load
• Double-delivery hand pump for fast approach in
plate appear as test values. Subsequent to the last Printer Paper
setup with reaction loading system
load step the relief and a second loading similar Replacement paper for use with Plate Load Tester
• High-precision dial gauges
to the first loading takes place. For the test eval- and LWD.
• Heavy-duty, rigid measuring bridge uation these values are shown in a corresponding Printer Paper HD-4129.5
• Supplied with calibration and conformity diagram as load settlement lines. Shipping wt. 2 lbs (0.9kg)
certificates The modulus of deformation Ev is determined
Plate Bearing Tester, 100kN HD-4600 from the load settlement line of the first load (Ev1)
Plate Bearing Tester, 200kN HD-4601 and the second load (Ev2). By comparing the initial
Plate Bearing Tester, 500kN HD-4602 deformation from Ev1 and the subsequent defor-
Ship wt. 65lbs (29.4kg)
HD-4139.3F
mation of Ev2 provides an indication of the com-
shown with transport
Plate Bearing Plate Set paction attained. cases, which are included.
ASTM D1194, D1195, D1196 The test results and the load settlement lines can
ASTM plate set includes: 6", 12", 18" 24" and 30" be read with the HD-4139.3F Plate Load tester
(152, 305, 457, 610, 762mm) steel plates with eye- directly on the display and can be printed out
bolts for transporting and placement of plates with immediately at the site via thermal printer or be
a steel rod. reviewed later in the office on a PC.
Plate Bearing Plate Set HD-4605
Ship wt. 65lbs (29.4kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

16
Lightweight Deflectometer SOIL-FIELD
SO

LIGHTWEIGHT Deflectometer
Fast, accurate and easy compaction control!
Areas of application:
- Quality control in road and railway construction
- Quality assurance in earth works and canal construction
- Compaction monitoring in pipe trenches and cable ducts
- Testing of pavement bedding, foundation backfill

Lightweight Deflectometers HD-4129.3F

ASTM E2835-11; TP BF-StB B8.3; TB 10102-2004
Lightweight Deflectometers (LWDs) are increas-
ingly being used to determine overall compac-
tion quality of all types of earthworks through
their use as a QC/QA field test. LWDs provide a
rapid determination of elastic modulus, which is
an essential factor in mechanistic design and can
be used as an accurate assessment of compaction. Humboldt offers two models of Lightweight • help function
An LWD is used for measuring the bearing capac- Deflectometers from HMP— a deluxe model, the • efficient and fast 32-bit processor
ity (deflection) of subgrade/subsoils and unbound HD-4129.3F and a basic unit, the HD-4130.3F. • internal memory for up to 1000 tests
base layers, granular layers and backfilling mate- Both units are the same mechanism and differ only
• high-performance rechargeable battery
rials, according to ASTM E2835-11. Based on the in the controller used with each one.
static plate load test requiring a load vehicle, the The graphic interface of the HD-4129.3F provides
The HD-4129.3F features a deluxe controller that
LWD provides a simple, fast and repeatable test an intuitive menu, which guides the user through
includes:
providing an accurate assessment of compaction the testing procedure and provides real-time test
• a large, 3.5" colorful display results. Measured data is presented in tabular, as
parameters. Applications for this non destructive
method of testing include bearing capacity and • light sensor-controlled backlighting that pro- well as curve formats with date. time and GPS loca-
compaction include road construction, pipeline vides the optimum readability even in bright tion clearly depicted. This data can be exported
and cable backfill, railway track beds, airport run- sunlight from the control unit via USB or wirelessly directly
way/taxiways, dam construction, embankments, • easy menu navigation into the Cloud or to your PC for archiving and fur-
foundations and other earthworks. • integrated GPS ther processing. This allows personnel in any office
to have access to data while you are still on site
• integrated WIFI-enabled
testing. It is also possible to print out results to a
• interface for a thermal printer and USB small portable printer on site.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 17
SOIL-FIELD Lightweight Deflectometer

Electronic settlement HD-4129.3F HD-4130.3F

measuring instrument HD-4159.3F HD-4149.3F
Settlement measuring range 0.1 bis
3 3
2.0 mm ± 0.02 mm
HD-4130.3F Measuring range Evd < 225 MN/
3 3
m2
Temperature range 0 to 40 °C 3 3
Very robust, splash-water proof,
connection cable with high-quality 3 3
LEMO connectors
Graphic display in mm 56 x 73 38 x 68
Colorful, light sensor-controlled
3
and illuminated
Black/white 3
Help function 3
Fast, efficient 32-bit processor 3
Use of the web-based evaluation software: HMPre-
port, provides the ability to produce professional WIFI-enabled, USB, thermal printer
3 3
reports for each measuring point, which can include interface
your logo and contact details. This software allows GPS 3 3
you to work with your data from the Cloud or your Dimensions 210 x 100 x 31mm 211 x 100 x 26mm
PC. The software also enables you to store the data
Storage capacity, internal in
in a database with easy-to-use search and editing 1000 500
measurement series
options.
Power supply:
Units include:
High-performance rechargeable
• The LWD lithium-polymer-battery 3.7 V, 3
• magnetic base plate 6300 mAh
• portable printer (USB) (4) R6 Batteries 3
• GPS Menu navigation
3 3
• PC Software (18 languages available)
• Android App (HD-4129.3F and HD-4159.3F only) Loading Mechanism
Light Weight Deflectometer, 10kg, Deluxe HD-4129.3F Total weight: 15kg
3 3
Light Weight Deflectometer, 10kg, Standard HD-4130.3F (HD-4129 & HD-4130)
Light Weight Deflectometer, 15kg, Deluxe HD-4159.3F Drop weight: 10kg
3 3
Light Weight Deflectometer, 15kg, Standard HD-4149.3F (HD-4129 & HD-4130)
Ship wt. 65lbs (29.4kg)
Total weight: 20kg
3 3
Transport Cart (HD-4159 & HD-4149)
Cart allows for easy moving of LWD. Drop weight: 15kg
Transport Cart HD-4129.01A 3 3
(HD-4159 & HD-4149)
Shipping wt. 20 lbs (9kg)
Max. impact force 7.07 kN 3 3
Transport Case
Wooden case for storage and transport Duration of impact 17.0 ± 1.5 ms 3 3
Transport Case HD-4129.05A Material: zinc coated/
Shipping wt. 25.7 lbs (11.7kg) 3 3
hard-chrome plated steel
Printer Paper
Spring element 17 disk springs 3 3
Replacement paper for use with Plate Load Tester
Load plate
and LWD.
Printer Paper HD-4129.5 Diameter 300 mm,
3 3
Plate thickness 20.0 mm
Shipping wt. 2 lbs (0.9kg)
Total weight 15kg
3 3
HD-4129.05A Material: zinc coated steel

HD-4129.01A

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

18
Compaction Uniformity SOIL-FIELD

H-4140

H-4140 with Case

GeoGauge are met. Compacting and monitoring pavement directly links the in-place engineering properties
ASTM D6758 layers directly to design requirements of structural of compacted materials with Mechanistic-Empirical
The GeoGauge is a unique, QC/QA field tool layer stiffness or material modulus in addition to Design for effective QC/QA. Successful control of
that can be used to measure the uniformity of percent compaction during the construction pro- compaction creates a quality functional structure
unbound pavement layers by measuring the cess establishes the means to effectively control with the desired engineering properties for the
variability in stiffness throughout a structure. structural uniformity, strength and deflection, as application and life intended.
It is an excellent tool for identifying construction well as enabling the monitoring and control of the Applications include subgrade, sub-base, base,
anomalies that would otherwise go undetected construction quality of various materials. This leads monitoring the strength gain of lime, cement, fly-
during construction where only density or percent to better smoothness and longer lasting pavement ash and polymer stabilized materials, monitoring
compaction measurements were used. By measur- surfaces at lower cost. the re-compaction of underground utility back-
ing stiffness, the GeoGauge can reveal and thus The GeoGauge works by applying a vibrating fills to previous properties matching surrounding
help reduce variabilities in layer properties, which force at 25 specific frequencies, which produce undisturbed materials, monitoring the compac-
density measurements may miss, thus allowing small deflections in the material. The resulting tion of asphalt and cold in-place recycling to peak
corrective actions to be taken during construction displacement is measured by the GeoGauge and properties to prevent wasted effort and damaging
to ensure that the highest quality base and sub- displayed as stiffness determined by the ratio of over-compaction.
grade are achieved despite variations in materials the force to deflection. The GeoGauge produces GeoGauge H-4140
used. stress and strain levels common for pavement, Shipping wt. 40 lbs (18.1kg)

The GeoGauge is the perfect companion instru- bedding and foundation applications. In addition,
ment for density measuring devices such as Young's and shear modulus can be determined
nuclear gauges and the electrical density gauge. from GeoGauge measurements if a Poisson's ratio
Density measuring devices can be used to ensure is assumed. This dynamic technology used by the
that proper compaction is achieved and the GeoGauge simulates real in-use conditions. This
GeoGauge can be used to verify that the stiffness/ factor allows the GeoGauge to directly measure
modulus values assumed in the design specifica- in-place engineering properties during the con-
tions of new or rehabilitated pavement structures struction process. The GeoGauge supports and

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 19
SOIL-FIELD Compaction Uniformity

H-4140.20

H-4140 Face Detail

H-4140.C

Features include: • Other compaction applications include: lime, Verifier Mass

• Dynamically measures in-place engineering cement, fly-ash and polymer stabilized mate- 10kg Mass used to verify calibration of gauge.
properties using structural layer stiffness, MN/m rials, cement-treated and rehabilitated bases, Verifier Mass H-4140.20
Shipping wt. 25.7 lbs (11.7kg)
(klbf/in) and Young’s modulus of a material, MPa large particle aggregate bases, as well as
(kpsi) underground utility backfills Calibration Platen
10kg Platen used to allow gauge to self-calibrate.
• In-place QC/QA links compaction and material • Gauge includes simple, easy-to-use software
Gauge is bolted onto platen with a torque wrench,
performance directly to design requirements application, which provides download and
which is included.
while advancing mechanistic-empirical pave- storage of test data. Application allows printing
of data reports, as well as saving information Calibration Platen H-4140.C
ment design Shipping wt. 30 lbs (13.6kg)
• Enables maximum lift stiffness with minimum in other formats (.pdf, .csv and rich text) for
Data Cable, Infrared
compactive effort importing data into other programs
Infrared (IR) serial-interface, adapter cable with spread-
• Facilitates uniform stress transmission and dis- sheet software template
Specifications
tribution from pavement to subgrade resulting Data Cable, Infrared H-4140.12
in longer pavement life, reduced maintenance 17 to 400 klbf/in (3 to 70 Shipping wt. 2 lbs (0.9kg)
Layer Stiffness
costs and longer lasting surface smoothness. MN/m)
• Enables reduced structural variability in Young’s Modulus
4 to 90 kpsi (26 to 610 MPa
construction (in-place)
• In-place QC/QA of the strength gain of stabi- Measuring Depth 9 to 12 inches (230 to 310 mm)
lized materials Measuring
• Data base development supporting mech- 75 seconds
Duration
anistic-empirical design and performance
six D-cell batteries
specifications Power
(1000 to 1500 measurements)
• Portable, fast, simple, reliable, non-invasive
gauge only: 11" dia. x 10.5"
high (280 mm x 270 mm)
Dimensions carrying case:
18.5" x 16.5" x 13"
(470 x 420 x 330 mm)
gauge only: 22 lbs. (10 kg)
Net Weight
with case: 34 lbs. (15.5 kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 20
Density SOIL-FIELD

H-3821
H-4238

H-4245 H-4249
H-4248
H-4238L

H-4117
H-4246
H-4249P

Sand Cone Apparatus Set, 6.5" (165mm) (order separately). The cone has a brass cylindrical plate for support on the bottom. A clear plastic
ASTM D1556; AASHTO T191 valve with a 0.5" (12.7mm) dia. orifice and stops cover on the top cone allows for viewing sand
The sand cone apparatus determines the in-place that prevent the valve from rotating past the com- flow. The unit also has handles for easier carrying.
density of soils having a maximum particle size pletely open or completely closed positions. Flange that fits the lower cone allows apparatus to
of up to 2" (51mm) using test hole volumes of Sand Cone Apparatus Set H-4249 be used on holes up to 12" (305mm) dia. Complies
Shipping wt. 6 lbs (4.5kg) with U.S. Army Corps of Engineers specifications.
approximately 0.1ft3 (2.8L). The set is comprised of
a 1-gal. (3.79L) threaded plastic jar; a COE detach- Sand Cone Plate Sand Cone, Large, 12" (165mm) H-4248
ASTM D1556; AASHTO T191 Shipping wt. 50 lbs (23kg)
able double cone, which is threaded on one end;
and, has a 6.5" (165mm) dia. flanged opening on Used with sand cone apparatus to simplify removal Density Sand
the other, which fits the opening of the H-4246 of soil from test hole and act as template to control ASTM D1556; AASHTO T191, COE
sand cone plate. (order separately). The cone has hole diameter. Cast aluminum alloy. Both plates Clean, dry, free-flowing uncemented sand has few,
a brass cylindrical valve with a 0.5" (12.7mm) dia. have an overall dimension of 12 x 12" (305 x 305 if any, particles passing the No. 200 (75mm) or
orifice and stops that prevent the valve from rotat- mm). The H-4246 has a 6.5" hole and the H-4249P retained on the No. 10 (2.00mm) sieves. The sand’s
ing past the completely open or completely closed has a 4.5" hole. variation in bulk density does not vary greater than
positions. Sand Cone Plate, 6.5" (165mm) Hole H-4246 1 percent. Comes in a 50lb. box with a heavy rein-
Sand Cone Apparatus Set H-4245 Sand Cone Plate, 4.5" (114mm) Hole H-4249P forced inner bag.
Shipping wt. 3 lbs (4.5kg) Shipping wt. 4.5 lbs (2.1kg)
Density Sand H-3821
Sand Cone Apparatus Set, 4.5" (114mm) Replacement Jar for Sand Cone Shipping wt. 55 lbs (25kg)

ASTM D1556; AASHTO T191 ASTM D1556; AASHTO T191 Sand Cone Accessory Kit
The 4.5" sand cone apparatus can be used when it 1-gal (3.79L) capacity, threaded-plastic replace- Accessory kit for use with sand density cones and
is desired to collect a smaller sample or when gath- ment jar is the same as furnished with the H-4245 voluvessels. Includes: 100 Sample bags and ties, a
ering a sample is difficult due to extremely hard and H-4249 sand cone apparatus set. pocket dial thermometer, a bristle brush, a stain-
compacted soil. The cone also determines the Replacement Jar for Sand Cone H-4238 less steel spoon, a steel chisel and a rubber mallet.
in-place density of soils having a maximum particle Shipping wt. 1.5 lbs (0.5kg) Does not include sand.
size of up to 2" (51mm) using test hole volumes of Replacement Lid for Plastic Sand Cone Jar Sand Cone Accessory Kit H-4117
Shipping wt. 9.5 lbs (4.3kg)
approximately 0.1ft3 (2.8L). The set is comprised of Replacement lid for use with 1-gal (3.79L) capacity,
a 1-gal. (3.79L) threaded plastic jar; a detachable threaded-plastic jar. Sample Bags and Ties
double cone, which is threaded on one end for Replacement Lid for Sand Cone Jar H-4238L 100 Sample bags and ties.
attaching the threaded plastic jar; and, has a 4.5" Shipping wt. 0.6 lbs (7.3kg) Sample Bags and Ties H-4201
Shipping wt. 6 lbs (4.5kg)
(114mm) dia. flanged opening on the other, which Sand Cone, Large, 12" (165mm)
fits the opening of the H-4249P sand cone plate. ASTM D1556; AASHTO T191, COE
For determining in-place density of gravel and
coarse soils. Features two identical cones with a
large valve between them and a circular density

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 21
SOIL-FIELD Density

H-4166.10

H-4166S
w/H-4166
H-4203DT.3
H-4168

H-4116

H-4166 H-4203DT.4A
H-4167
H-4203.4
H-4203.3

H-4166.5
H-4249P

Voluvessel Balloons, 10pk Density Drive Sampler

ASTM D2167; AASHTO T205 Package of 10 balloons for Voluvessel. ASTM D2937
Voluvessels determine the in-place density of Balloons, 10pk H-4168 For determining in-place density of soil by driv-
Shipping wt. 0.2 lbs (0.09kg)
compacted or firmly-bonded soils using a rubber ing a thin-walled tube into the soil mass to obtain
balloon apparatus viewed through a graduated, Pump Assembly, Replacement a relativity undisturbed sample. Typically used
direct-reading clear plastic cylinder. Humboldt's Rubber-bulb, pump assembly for all Voluvessels. to verify compacted fill placement, or to obtain
voluvessel is designed with a plastic cylinder, which Pump Assembly, all units H-4166.10 samples from the bottom of shallow excavations.
Shipping wt. 0.6 lbs (0.27kg)
screws into the density plate with the pump assem- Zinc-plated, steel drive head and sliding weight
bly mounted on top. Both voluvessels include a Voluvessel Base hammer used with separately ordered drive tubes.
pressure-vacuum pump assembly, pressure gauge, ASTM D2167; AASHTO T205 Drive head, 10 lb., has shock reducing spring to
quick-coupler valve, double-graduated cylinder, Base for Voluvessels, H-4166 and H-4167. Cast alu- guard against fatigue failure.
10 balloons and a density plate. Voluvessels are minum alloy. Plate has an overall dimension of 12 x Density Drive Sampler, 3" (76.2mm) H-4203.3
not suitable for soft soils that deform under a slight 12" (305 x 305 mm). and a 4.5" hole. Density Drive Sampler, 4" (101.6mm) H-4203.4
pressure or where the volume of the hole cannot Shipping wt. 20 lbs (11kg)
Sand Cone Plate, 4.5" (114mm) Hole H-4249P
be maintained at a constant value. The Voluves- Shipping wt. 4.5 lbs (2.1kg) Drive Tubes for Density Drive Sampler
sels are individually calibrated before leaving the Voluvessel Cylinder Seal Gasket ASTM D2937
factory to ensure direct readings on the scale are Replacement seal gasket for Voluvessels. Individual drive tubes for use with the density
accurate without the need for calculations. H-4166 Voluvessel Base, H-4166 & H-4167 H-4166.5 drive sampler. Tubes are available in two sizes: 3"
is used with max.-sized soil particles of 0.5" (13mm) Shipping wt. 3 lbs (4.5kg) (76.2mm) x 2.75" (69.9mm) length, (3" x 0.01 ft3)
and H-4167 is used with max.-sized soil particles of for use with the H-4203.3 drive sampler and 4"
1" (25mm). Voluvessel w/ Metal Guard (101.6mm) x 5" (127mm) length, (4" x 0.033 ft3) for
Voluvessel, 1/20 ft3 (1600ml) H-4166 ASTM D2167; AASHTO T205 use with the H-4203.4 drive sampler.
Voluvessel, 1/13 ft3 (2230ml) H-4167 This Voluvessel features a base-mounted pump Density Drive Tube, 3" (76.2mm) H-4203DT.3
Shipping wt. 15.7 lbs (7.3kg)
and a metal guard for the graduated plastic cyl- Density Drive Tube, 4" (101.6mm) H-4203DT.4A
Voluvessel Saddle Weights inder which provides an integral metal handle. Shipping wt. 0.6 lbs (0.6kg)

ASTM D2937 Each unit includes a double-graduated cylinder,

Weights used to ensure uniform and repeatable base plate, pressure/vacuum pump assembly with
weight is applied during testing for accurate read- quick-coupler, ten balloons, and an integral gauge
ings. Can be used with all Voluvessels. for controlling pressure during calibration and test-
Voluvessel Saddle weights H-4166S ing. Th H-4116 Voluvessel is used with max.-sized
Shipping wt. 72 lbs (33kg) soil particles of 0.5" (13mm) .
Voluvessel, 1/20 ft3 (1600ml) H-4116
Shipping wt. 14 lbs (6.8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

22
Shear Strength, CBR, DMDCP SOIL-FIELD

Both include a pelican case

H-4219T
Threaded Ends

Both DCPs include

ude a
hard-cone tip
p and
a disposable
sable
cone adapter
apter

H-4219QC Quick-Connect Ends

Dual-Mass Dynamic Cone Penetrometers Included with the H-4219T DCP:

Accessories Model
ASTM D6951
Description Model Drive Rod, 12-inch
Developed by the Army Corps of Engineers, H-4219T.12
Dual-Mass DCP Hammer, Threaded
Dual-Mass Dynamic Cone Penetrometers (DMD- H-4219T.1
Threaded Connection Drive Rod, 12-inch
CPs) provide a low-cost, efficient test method for H-4219QC.12
quickly determining in-situ CBR values of pave- Drive Rod, Threaded, 37.75" Quick-Connect
H-4219T.2
ment base, sub base and sub grades. DMDCPs (959mm) Extension Rod, 24-inch,
are primarily used to determine in-place soil shear Disposable Cone Adapter H-4219.5 Threaded (For use with both
H-4219.8
strength in road construction with CBR values from Quick-Connect and Threaded
Hard Cone Tip H-4219.4
less than 0.5 to 100% and bearing values ranging models)
from 430 to 10,800 psf. They can readily be used Disposable Cones (pkg of 25) H-4219.25
Disposable Cones (100 pk.) H-4219.100
for depths from 30 inches to 6 foot with optional Scale, 48" H-4219.2
drive rods and extensions. All Humboldt DMDCPs Single-User Scale Guide Set H-4219.17
comply with ASTM D6951 specifications and come H-4219QC.12
Wrench Set (Threaded) H-4219T.7
with a chart to compute CBR values, as well as an H-4219T.12
Excel spreadsheet template, which automatically User Manual H-4219.MAN
charts the test results. Go, No-Go Gauge H-4219.3 H-4219.8
Humboldt's DMDCPs are known for their high Pelican Case H-4219.16
quality manufacturing and reliability, and, are
available with either threaded connections or a Dual-Mass DCP, Threaded Ends H-4219T
quick-connect design. Both Humboldt DMDCPs Ship wt. 66lbs. (29.5kg)
feature our exclusive easy-grip hammer that pro- Included with the H-4219QC DCP:
vides a finger grip machined into the back side of
the hammer flange, which provides easy, non-slip Description Model
lifting when performing a test. Dual-Mass DCP Hammer,
H-4219QC.1 H 4219 100
H-4219.100
Humboldt DMDCPs consist of a drive hammer and Quick-Connect Connection
steel extension shaft assembly with a 60° hard- Drive Rod, Quick-Connect,
H-4219QC.2
ened cone tip attached at one end. The cone tip 37.75" (959mm)
is driven into the pavement or sub grade by means Quick-Connect Pins (2) H-4219QC.18
of a sliding dual-mass hammer. The diameter at
Disposable Cone Adapter H-4219.5
the base of the cone is 20 millimeters, which is 8
millimeters larger than that of the extension shaft. Hard Cone Tip H-4219.4
H-4219.25
Hammer weight is 17.7 lbs and the hammer drop Disposable Cones (pkg of 25) H-4219.25
distance is 22.6" (574mm). Humboldt DMDCPs
Scale, 48" H-4219.2
can also quickly convert to a single-mass unit for
use in weaker soils having low CBR values or foun- Single-User Scale Guide Set H-4219.17
dation evaluations by removing the outer sleeve Wrench Set (Quick-Connect) H-4219QC.7 H-4219.4
from the dual-mass hammer. User Manual H-4219.MAN
Go, No-Go Gauge H-4219.3
H-4219.5
Pelican Case H-4219.16

Dual-Mass DCP, Quick-Connect Ends H-4219QC

Ship wt. 60lbs. (29.5kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 23
SOIL-FIELD Shear Strength, CBR, DMDCP

H-4219.30

H-4220F

Smart DCP for Dual-Mass each data point. Completed tests can be graphed Foundation, Single-Mass DCP, Quick-Connect
Dynamic Cone Penetrometers on the smart device in the field for quick analysis or The H-4220F single-mass (10.1 lbs.), founda-
ASTM D6951 sent via email to the investigation lead to review tion DCP is used to estimate the shear strength
The SmartDCP makes collecting soil data with in the office of weak soil with a CBR less than 20 and psf less
your Dynamic Cone Penetrometer much easier by A complimentary desktop application for Win- than 4000. It can be used to assess the in-place
automatically counting blows and eliminating the dow's systems is also available. The desktop appli- strength of undisturbed soil and/or compacted
need for tape, pencils, paper and at times a second cation can be used to quickly graph your field data materials. It can also be used to estimate the CBR
operator. It also provides vastly improved accuracy and keep your data organized using the applica- (California bearing ratio), shear strength and thick-
and ease of collecting and transferring data from tion and Windows Explorer. This program can be ness of the material. The H-4220F is ideal for hor-
the field to the office. downloaded from the following link: izontal construction applications, such as shallow
The SmartDCP achieves this by: foundations, footings and pavement shoulders.
http://www.vertekcpt.com/dcp-handheld-and-
Typically it is used to assess material properties to
• Automatically counting blows; adcp or via electronic transmittal.
a depth of 36 in (914 mm) below the surface. Also,
• Recording the change in depth with each blow; SmartDCP Features:
with the use of 24" extensions this depth can be
• Tracking the total depth of the probe; • Touchscreen user interface (Android only) increased to 6 ft ( 2 m).
• Recording data on Apple iOS and Android • Real-time display of test data The H-4220F comes with a 37.75" drive rod that
smart devices via WIFI; • Data transfer to computer via WIFI or USB is marked in 2" increments; a single-mass, 10.1
• Eliminating the need for a ruler, pencil, • Displays mm per blow; blow counts vs. delta lb ( 4.5kg), sliding hammer and a reusable, hard-
and paper, distance per blow (mm) ened point. The drive rod and hammer are con-
• and, transferring data via e-mail or USB from • Displays depth plot; depth (0-100cm) vs. nected with a quick-connect pin. The Hammer
the smart device number of blows drop is 22.6" (575mm) with a tolerance of 0.039in.
The SmartDCP kit can be mounted to most hand (1.0mm). The hardened point has a 60° angle with
• Displays CBR plot; depth (0-100cm) vs. CBR%
held DCPs on the market and is easily operated by a tolerance of 1°. The tip base diameter is 0.790"
• Fast setup / fast deployment (20mm) with a tolerance of 0.010" (0.25mm).
a single person. The investment cost associated
• Uses wireless WIFI laser depth transducer Foundation, Single-Mass DCP H-4220F
with the SmartDCP is quickly realized through the
reduction in time spent doing field tests, as well • ANDROID OS version 2.2 or higher Ship wt. 27lbs. (12kg)

as the increased accuracy and ease of transferring • WIFI-enabled ANDROID smart phone
or tablet Accessories Model
data and creating reports. Users have repeatedly
doubled the number of completed tests with • SD card Drive Rod, 12-inch
H-4219QC.12
increased accuracy when compared to the tradi- The H-4219.30 SmartDCP includes: Quick-Connect
tional manual data collection method of using a Extension Rod, 24-inch,
1. carry bag; Leica Disto E7100i Laser Range Finder
scale and paper log. Threaded (For use with both
with batteries; Baseplate with laser mount; laser H-4219.8
In the field the SmartDCP records data on a smart target; smart device arm band; stamped wrench Quick-Connect and Threaded
App. The App is free and available for download at and 1” combination set, and a manual. models)
the iOS App store for iPhones or Google Play for
SmartDCP H-4219.30
Android phones. The SmartDCP App immediately
Ship wt. 27lbs. (12kg)
provides real time CBR%, depth change between
blows, as well as total depth of penetration with

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

24
Shear Strength, DCP SOIL-FIELD

H-4202.7A
H-4202.1A

H-4202A
H-4139

Dynamic Cone Penetrometer for Shallow In-situ Tests Sleeved Hammer for Dynamic Cone Penetrometer DCP Test Set without Augers
The dynamic cone penetrometer (DCP), originally Alternate hammer for H-4202 DCP test set. Ham- The H-4202X DCP test set without the augers
developed by George Sowers, uses a 15 lb steel mer provides a safer and easier alternative to the includes; (1) standard hammer assembly
mass falling 20" to strike an anvil to penetrate a standard hammer. (H-4202.1), (1) heat-treated 45° cone penetrome-
1.5" diameter 45° (vertex angle) cone that has Sleeved Hammer for DCP H-4202.1A ter point with a 1 ft. adapter rod (H-4202.3), (4) 2.5
been seated in the bottom of a hand-augered Ship wt. 30.2lbs. (15kg) ft. E drill rod extensions (H-4202.225). This set is
hole. The DCP can be used effectively in augered also available with the H-4202.1A sleeved hammer.
holes in nearly all types of soils to depths of 15 to Dynamic Cone Penetrometer Individual Items
DCP Test Set without Augers H-4202AX
20 ft. (4.6 to 6.1m). Components are zinc-plated Description Model Sleeved Hammer for DCP, No Augers H-4202SX
and cones are heat-treated. The cone can be Standard drive hammer H-4202.1 Ship wt. 65lbs. (29.5kg)
replaced with a Drive Tube Assembly (H-4202.7A )
Sleeved drive hammer H-4202.1A Shelby Tube Drive Head
for collection of 3" x 10" (7.6 x 25.4 cm) tube sam-
E drill rod extension 1 ft. H-4202.21 Drive head for Shelby tubes for use with H-4202.1
ples from hand-augered holes.
or H-4202.1A drive hammers with 3" ”E“ rod con-
This penetrometer is used to determine a penetra- E drill rod extension 2 ft. H-4202.22 nection. (See page 31 for Shelby tubes.)
tion resistance relationship with the standard pen- E drill rod extension 2.5 ft. H-4202.225 Sleeved Hammer for DCP H-4202.7A
etration resistance of virgin soils. As with all field
E drill rod extension 5 ft. H-4202.25 Ship wt. 5.9lbs. (2.7kg)
tools used in foundation evaluations, this method
Drive point (45° cone), 1 ft. Rod H-4202.3 Proctor Penetrometer Set
should never be used as the sole means for deter-
ASTM D1558
mining foundation conditions. It should be used in Drive point (45° cone), No Rod H-4202.3DP
conjunction with previously established field and Establishes the moisture-penetration resistance
Auger assembly: (Head, (2) pins,
laboratory data, such as the split-spoon standard H-4202.6A relations of fine-grained soils. Includes these inter-
T-handle, (1) extension
penetration test, density, shear strength or consol- changeable needles (area in sq. in. or sq. cm): 1in.2
Auger T-handle H-4202.4 (6.45cm2), 3/4 in.2 (4.84cm2), 1/2 in.2 (3.22cm2), 1/3
idation data.
Auger T-handle, SS H-4202.4SS in.2 (2.15cm2), 1/5 in.2 (1.29cm2), 1/10 in.2 (.65cm2),
The H-4202A set includes; (1) standard ham-
Auger extension. 36" H-4202.5 1/20 in.2 (0.32cm2) 1/30 in.2 (0.22cm2) and 1/40 in.2
mer assembly (H-4202.1), (1) heat-treated 45°
(0.16cm2). Replacement needles available below.
cone penetrometer point with a 1 ft. adapter Auger extension, SS, 36" H-4202.5SS
rod (H-4202.3), (4) 2.5 ft. E drill rod extensions Proctor Penetrometer Set H-4139
Auger head, standard 3.25" H-4202.6 Ship wt. 17lb (7.7kg)
(H-4202.225), (1) auger head (H-4202.6), (1) auger
T-handle (H-4202.4), (4) 36" auger extensions Auger head, SS, 3.25". H-4202.6SS Proctor Penetrometer Needles
(H-4202.5). Windowed auger head, 3.25" Description Model
H-4202.6W
The 4202A DCP test set is also available with a (heat-treated carbon steel). Resistance Needle Set H-4143N
H-4202.1A sleeved drive hammer for easier and Windowed auger head, stan-
H-4202.6WSS 1 sq. in. (6.45 cm2) needle H-4143.1
safer operation. dard (stainless steel) 3.25"
3/4 sq. in. (4.84 cm2) needle H-4143.75
Dynamic Cone Penetrometer Test Set H-4202A Shelby Tube Drive Head,
DCP Test Set with Sleeved Hammer H-4202AS H-4202.7A 1/2 sq. in. (3.22 cm2) needle H-4143.50
3" E Rod
Ship wt. 78lbs. (36kg) 1/3 sq. in. (1.29 cm2) needle H-4143.33
Replacement connector pin. H-4202.8
2
1/5 sq. in. (2.15 cm ) needle H-4143.20
Replacement connector pin, SS H-4202.8SS
1/10 sq. in. (0.65 cm2) needle H-4143.10
E drill rod is 1-15/16"in diameter
2
1/20 sq. in. (0.32 cm ) needle H-4143.05
1/30 sq. in. (0.22 cm2) needle H-4143.033
1/40 sq. in. (0.16 cm2) needle H-4143.025

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 25
SOIL-FIELD CBR, Shear Strength
H-4152F H-4227

H-4454.050

H-4158.1
H-4156SB
H-4156J

H-4152F.1 H-4454.020
H-4470
H-4466.10

H-4152F.2 H-4179F.20
H-4178F.4
H-4179
H-4221.3A
H-4197F.10 H-4221.1
H-4221 H-4221.4

H-4221.3A

CBR Field Test Set Vane Inspection Set Geovane Soil Shear Strength Tester
ASTM D4429 The Vane Inspection Set provides a rapid check The geovane is a hand-held instrument used for
The CBR field test set is designed for making CBR of the stability of foundations, excavations and determining soil shear strength providing the read-
determinations in the field and is built around a trenches in clay. The total range is 0 to 260kPa ing in kPa. The device is simple to use. A 19mm
modified H-4156 load frame. CBR field testing can (0 to 2.6 ton/sq. ft.). The scale built into the han- vane blade is screwed into the base of the geovane
quickly yield a relative strength determination with- dle holds the peak value until reset. Accuracy is and the vane is pushed into the soil. Simply rotate
out having to rely on lab tests. Field tests involve ±10%. Four different sized vanes are included the geovane at a rate of 1 revolution per minute
forcing a piston into the soil and comparing the with the set (16 x 32, 20 x 40, 25.4 x 50.8mm and and take a reading off the face when the soil fails.
depth of penetration in relation to the load placed 50.8 x 101.6mm). The effective ranges are 0 to The pointer stays in place when failure occurs,
on the piston. Typically, the reaction load used for 260, 0 to 130, 0 to 65 and 0 to 8kPa. (0 to 2.6, 0 to allowing you to look up the indicated reading on
field testing is a heavy piece of equipment, such as 1.3, 0 to 0.65 and 0 to 0.08tsf). A "dummy" vane the supplied calibration chart to get your reading
a loaded dump truck. Gear box is 2-speed model is also included to calibrate the six 0.5 meter long in kPa from zero to 200. Through the use of the
with a 10,000lbf (45kN) capacity and 3.5 inches of extension rods for effects of soil friction. All items optional 33mm vane, readings can be measured
lift. The use of the extension and connector set come in a compartmentalized vinyl carrying case between the range of zero to 40 kPa. Extension
provides sufficient flexibility for almost any type of with three wrenches. rods are available to increase the depth mea-
height requirement. The CBR field test set includes: Vane Inspection Set H-4227 surement capabilities of the unit. The H-4221.4
Ship wt. 15.6lb (6kg) Adapter is needed to attach extension rods to the
CBR Field Test Set H-4152F
geovane. The geovane is supplied complete with a
CBR Field Test Set, Metric Indicators H-4152FM Vane Inspection Kit Replacement Parts
19mm vane blade, wrenches and a carrying case.
Ship wt. 289 lbs. (131kg)
Description Model Geovane Soil Shear Strength Tester H-4221
Part # Description Vane: 50.8 x 101.6mm H-4227.2 Ship wt. 7lb (3kg)

H-4156J (1) 2-sp. gear box, handle & platen Vane: 16 x 32mm H-4227.3 Geovane Accessories and Replacement Parts

H-4156SB (1) Swivel base Vane: 25.4 x 50.7mm H-4227.4 Description Model
H-4454.020 (1) 2200 lbf load ring Vane: 20 x 40mm H-4227.5 Vane Blade (33mm) H-4221.1
H-4454.050 (1) 5500 lbf load ring Vane: Calibration H-4227.7 Extension Rod 12" (300mm) H-4221.2A
H-4152F.1 (1) CBR extension set Vane Inspection T-Handle H-4227.10 Extension Rod 19.7" (500mm) H-4221.3A
H-4152F.2 (1) CBR connector set Extension Rod, 0.5 meter H-4227.1 Extension Rod Adapter H-4221.4
H-4158.1 (1) Dial indicator, 1.000" x 0.001"
H-4152F.8 (1) Steel bridge support
H-4179F.10 (1) Surcharge weight, 10lb, 10"
H-4179 (2) Slotted surcharge weight, 10lb
(2) Slotted surcharge weight,
H-4179F.20
20lb, 8.5"
H-4470 (1) Magnetic indicator mount
H-4178F.4 (1) Penetration piston, 4"

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

26
Penetrometers, Cone SOIL-FIELD

HS-4210 Detail

H-4210A Detail

Detail Detail

H-4210A
H-4120HA
HS-4210 H-4204
H-4120H
Digital Static Cone Penetrometer Cone Penetrometer, Corps of Engineers Static Cone Penetrometer
The HS-4210 digital, static cone penetrometer IL DOT 502 Used in fine-grained, soft soils at shallow foun-
(DSCP), with its large, digital readout, makes test- Designed to evaluate soil trafficability and manu- dation and pavement subgrades to evaluate
ing and recording readings easy. The DSCP can be factured to Corps of Engineers specifications. The for soil consistency, level of compaction and
used to evaluate soil consistency by determining factory calibrated dial indicator reads directly in bearing capacity. Unmatched for accuracy, reliabil-
the soil’s level of compaction and/or the bearing psi. Includes 30 degree cone with 0.5 sq. in. base ity and ease of use. Pressure gauge with 0-70kg/
capacity. The DSCP is especially useful in evaluat- area; 150 Ib capacity proving ring; a dial indica- cm2 is scaled for direct reading of cone stress,
ing shallow foundations and pavement subgrades tor calibrated direct 0–300psi in 5psi increments; eliminating proving ring conversions. Dual-rod
where fine-grained and soft soils are being used. extension rod .625" (15.8mm) dia x 19" (483mm), design eliminates soil friction factor. High strength
The DSCP can also be used to aid technicians in and the handle. aluminum and steel construction. Standard model
quickly selecting sites for testing, as well as cor- includes a 60° cone with 1.5cm2. max. area, a 24"
Cone Penetrometer, Corps of Engineers H-4120H
relating with other tests, based on local conditions, (0.6m) starter rod assembly rated at 250 lbf axial
Cone Penetrometer, COE, T-Handle H-4120HA
such as standard or modified Proctor, CBR or bear- Ship wt. 4lbs. (1.8kg)
force max., and a pressure gauge.
ing capacity. The DSCP uses a dual-rod design, Static Cone Penetrometer H-4210A
which eliminates the need to correct for soil friction Description Model Ship wt. 6.3lbs. (2.9kg)
on the rod as the cone is pushed through the mate-
30° Cone, 0.5in2 H-4120H.4 Description Model
rial. Penetration resistance is read directly from the
cone tip and registered on the digital display. The Penetration Rod, 19" x .625" H-4120H.3 2
60° Cone, 3cm max area H-4210.3
unit comes with a 30" starter rod and a 60° cone 60° Cone, 1.5cm2 max area H-4210.1
Cone Penetrometer, Proving Ring
with a 1.5cm2 area and reads in lbs., TSF or kg/cm2.
Used to determine the bearing capacity of sub- Extension rod, 24" (0.6m) H-4210E.2A
Digital Static Cone Penetrometer HS-4210 grades, or to measure soil compaction. Light and Starter rod, 24" (0.6m) H-4210.2A
Ship wt. 9lbs. (4kg)
easy to handle in the field. A rapid means of deter-
Replacement O-ring H-4210.9
mining the penetration resistance of soil in shallow
Description Model
exploration surveys. Includes: 30°, 1 sq. in. (6.45
Extension Rod, 30" HS-4210.2 sq cm) cone; 250 Ib. (1.1kN) capacity proving ring;
Starter Rod, 30" HS-4210.3 brake type dial indicator, holds final reading until Note:
manually released; 0.75" (19mm) dia shaft, grad- The use of static cone penetrometers should
Inside Push Rod, (29.875") not replace laboratory testing of field analysis
HS-4210.3.1 uated at 6", (152mm) intervals; 0.75" (19mm) dia
For Starter Rod or be used to produce foundation design data.
extension rod, graduated at 6" (152mm) intervals;
60° Cone, 1.5cm2 max area H-4210.1 cast aluminum
2
60° Cone, 3cm max area H-4210.3 Cone Penetrometer, Proving Ring H-4204
Ship wt. 15.2lbs. (6.8kg)

Description Model
30° Cone, 1in2 (6.45cm2) H-4204.3
Proving Ring w/ Dial Indicator H-4204.1
Extension Rod, 37.25" H-4204.4

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 27
SOIL-FIELD Penetrometers

H-4200
H-4195

H-4200F
H-4195F

H-4205 H-4212
H-4212MH

Humboldt Soil Penetrometer (Tire-Gauge Design) Soil Penetrometer, Dial-Type and trim samples. The device can be used on any
For use by field personnel to check visual classi- A sophisticated pocket penetrometer offering reasonably flat surface that is slightly larger than the
fication of soils. Verifies whether excavation side greater capacity and sensitivity than others. Max- vane surface being used. The pocket shear vane
walls require shoring, based on OSHA cohesive imum value is retained on the dial until released can be used with fully-saturated, fine-grained soils
soils classifications. Indicates consistency, shear via push-button. Inner dial scale 0 to 6.0, with with an undrained strength independent of normal
strength, and approximate unconfined shear 0.1 divisions in tsf and kg/cm2. Outer scale gives pressure, including a wide range of clays from soft
strength. Direct-reading scale—in tons/sq ft, or load strength over 0 to 11.0 with 0.1 divisions in to stiff consistency. Readings can be made from 0
kg/sq cm—corresponds to equivalent unconfined kg. This reading is used with charts (included) to to 2.5 TSF (1 Kg/cm2). The dial on the unit reads in
compressive strength. Range: 0 to 4.5 tons. High estimate safe bearing pressures, depending on 0.05 TSF (0.05 Kg/cm2) increments.
quality construction. Includes belt-loop style car- plunger used and soil type. Values indicated relate Pocket Shear Vane, Metal H-4212MH
rying case and operating instructions. Should not to the standard 0.25" dia. plunger. In addition, Ship wt. 0.8lb (0.4kg)
replace laboratory testing or field analysis, or be readings with four other included plungers (10,
Pocket Shear Vane, Plastic
used to produce foundation design data. 15, 20, 25mm) indicate safe bearing pressures
The H-4212 pocket shear vane tester provides a
Humboldt Soil Penetrometer H-4200 for foundations in consolidated soils over a range
quick and efficient method for determining shear
Ship wt. 0.4lb (0.2kg) of sandy to clay-type soils. The 2.5" (63mm) dia.
strength values of cohesive soils. The pocket shear
dial can be easily recalibrated using register plates
Soil Penetrometer, Pocket-Type vane is widely used for taking on-site measure-
(included) and any readable scale of 10-15 lbs.
For use by field personnel to check visual classi- ments of excavations, including trenches and test
capacity. Includes data tables, register plates,
fication of soils. Verifies whether excavation side pits. It is also used for taking readings from thin-
instructions, and carrying case.
walls require shoring, based on OSHA cohesive wall or split core soil samples. It can also be used
soils classifications. Indicates consistency, shear Soil Penetrometer, Dial-Type H-4205 in the laboratory for evaluations. The device is
Ship wt. 1lb (0.5kg)
strength, and approximate unconfined shear widely used by safety and OSHA inspectors, back
strength. Direct-reading scale—in tons/sq ft, or Pocket Shear Vane, Metal hoe operators, field testing technicians, consult-
kg/sq cm—corresponds to equivalent unconfined The Humboldt H-4212MH pocket shear vane Tes- ing engineers, etc. This device comes with three
compressive strength. Indicator sleeve retains ter provides a quick and efficient method for deter- vanes, which are easily attached or removed. The
reading after piston is released. mining shear strength values of cohesive soils. The torvane shear tester is molded plastic and comes in
Soil Penetrometer, Pocket-Type H-4195 pocket shear vane is widely used for taking on-site a plastic molded case.
Ship wt. 0.8lb (0.4kg) measurements of excavations, including trenches The pocket shear vane can be used to gather a
and test pits. It is also used for taking readings from large number of readings including those from dif-
Penetrometer, Low-Strength Soil Adapter Foot
thin-wall or split core soil samples. It can also be ferent failure planes without the need to prepare
Adapter foot is recommended when testing
used in the laboratory for evaluations. The device and trim samples. The device can be used on any
extremely low strength cohesive soils. 1" (25mm)
is widely used by safety and OSHA inspectors, reasonably flat surface that is slightly larger than the
dia. foot, compared to the 0.25" (6.35mm) pene-
back hoe operators, field testing technicians, con- vane surface being used. The pocket shear vane
trometer piston, increases the effective area mea-
sulting engineers, etc. can be used with fully-saturated, fine-grained soils
sured by 16 times. Divide by 16 to obtain correct
unconfined compressive strength when the read- The Humboldt shear vane device comes with three with an undrained strength independent of normal
ing in tons per square foot or kilograms per square vanes, which are easily attached or removed from pressure, including a wide range of clays from soft
centimeter is on the low-load side. the device with the included hex-wrench. We also to stiff consistency. Readings can be made from 0
include a custom, heavy-duty, nylon bag for stor- to 2.5 TSF (1 Kg/cm2). The dial on the unit reads in
Adapter Foot for H-4200 H-4200F
age, which can be quickly attached to your belt 0.05 TSF (0.05 Kg/cm2) increments.
Adapter Foot for H-4195 H-4195F
Ship wt. 0.4lb (0.2kg)
with its belt clip, as well as a laminated instructions Pocket Shear Vane, Plastic H-4212
card, so you always have instructions to refer to Ship wt. 1.3lbs (0.6kg)
when doing tests.
The pocket shear vane can be used to gather a
large number of readings including those from dif-
ferent failure planes without the need to prepare

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

28
Sampling Augers SOIL-FIELD

Augers, Quick-Connect Augers, Threaded

H-4442QC H-4442TH
Augers, Bucket-Type, Quick-Connect Augers, Bucket-Type, Threaded
Quick-connect, button-and-hex coupling system Threaded connections use standard, national
allows components to connect and disconnect course, threads. 5/8" connections are the most H-4447QC
faster and with less hassle than threaded systems. common and least expensive. Augers, core sam-
Quick-connect connections, are not compatible plers, probes, slide hammers, hammer-head han-
with slide hammers. Bucket augers offer outstand- dles, and kits are available with threaded connec-
ing durability and allow access to deeper depths. tions. Bucket augers offer outstanding durability H-4449QC
The regular auger bit is designed for ordinary soil and allow access to deeper depths. The regular
sampling. The sand auger bit is used for dry, sandy auger bit is designed for ordinary soil sampling.
soils. Mud auger bits are designed for sampling The sand auger bit is used for dry, sandy soils. Mud
heavy, wet soil or clay samples; opening facilitates auger bits are designed for sampling heavy, wet
removal of wet samples. Heat treated, high car- soil or clay samples; opening facilitates removal H-4447TH
bon steel bits with tungsten carbide hard-surfaced of wet samples. Heat treated, high carbon steel
edges. Bits are welded to a stainless steel cylinder, bits with tungsten carbide hard-surfaced edges.
topped with a carbon steel ball. Bits are welded to a stainless steel cylinder, topped
Augers, Bucket-Type, Quick-Connect with a carbon steel ball.
H-4449TH
Size Regular Sand Mud Augers, Bucket-Type, Threaded

2" H-4410QC H-4430QC H-4420QC Size Regular Sand Mud Auger Handles, Quick-Connect
2.25" H-4411QC H-4431QC H-4421QC 2" H-4410TH H-4430TH H-4420TH Cross handles with quick-connect, button-and-hex
2.25" H-4411TH H-4431TH H-4421TH coupling system connect and disconnect faster
2.75" H-4412QC H-4432QC H-4422QC
and with less hassle than threaded systems.
3.25" H-4413QC H-4433QC H-4423QC 2.75" H-4412TH H-4432TH H-4422TH
Auger, Cross-Handle, Padded H-4447QC
4" H-4414QC H-4434QC H-4424QC 3.25" H-4413TH H-4433TH H-4423TH Auger, Cross-Handle, 16" Ratcheting H-4449QC
4" H-4414TH H-4434TH H-4424TH Ship wt. 2.6lb (1.3kg)
Augers, Bucket-Type, Quick-Connect See Chart
Ship wt. 3lb (1.37kg) Auger Handles, Threaded
Augers, Bucket-Type, Threaded See Chart
Cross handles with threaded connections use stan-
Augers, Extensions, Quick-Connnect Ship wt. 3lb (1.3kg)
dard, national course, threads. 5/8" connections
Extensions for use with the Augers above. Augers, Extensions, Threaded
and are the most common and least expensive
Auger Extensions, Quick-Connect Extensions for use with the Augers above.
handle attachment method.
Description Model Auger Extensions, Threaded
Auger, Cross-Handle, Padded H-4447TH
2 ft. (610mm), Extension H-4442QC Description Model Auger, Cross-Handle, 16" Ratcheting H-4449TH
2 ft. (610mm), Extension H-4442TH Ship wt. 3lb (1.3kg)
3 ft. (914mm), Extension H-4443QC
4 ft. (1219mm), Extension H-4444QC 3 ft. (914mm), Extension H-4443TH
5 ft. (1524mm), Extension H-4445QC 4 ft. (1219mm), Extension H-4444TH
5 ft. (1524mm), Extension H-4445TH
Auger Extensions, Quick-Connect See Chart
Ship wt. 3lb (1.3kg) Auger Extensions, Threaded See Chart
Ship wt. 3lb (1.3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 29
SOIL-FIELD Sampling Auger Kits

H-4416.2

H-4449

H-4451

H-4452
H-4418.23 H-4419.23

Soil Auger Kits, Threaded Basic Soil Sampling Kits. 5/8" Threaded Rock Breaker Set
These soil auger kits are complete, compact setups Basic sampling kits provide everything you'll Pair of rock breaking attachments for auger sets.
for augering to depths of 12' or 16'. Soil auger kits need to auger to a target depth as deep as 12ft 5/8" threaded-end for attaching to extensions
include (1) regular and (1) mud auger, (4) exten- and obtain a relatively undisturbed soil core sam- and slide hammers. Used to split or chip rocks and
sions, an 18" rubber-coated cross handle, and a ple. The kits are used worldwide by construction stones found in an augered hole. These rock break-
flexible, poly-canvas carrying case for easy trans- companies, consultants and engineering firms ers are alloy-steel, sharp-edged chisels designed
port and storage. These are supplied with 5/8" for site investigations. They are available with for use with slide hammers. Used to break up
threaded connections. 5/8" threaded components with either 2.25" or obstructions in augered holes.
2.25" Augers with (4) 3' Extensions H-4419.23 3.25" augers. Each kit comes with (1) regular, (1) Rock Breaker H-4449
2.25" Augers with (4) 4' Extensions H-4419.24 mud, and (1) sand auger. The kits also include (3) Ship wt. 3lb (1.3kg)

3.25" Augers with (4) 3' Extensions H-4419.33 4' extensions, (1) 18" rubber-coated cross handle,
Slide Hammers
3.25" Augers with (4) 4' Extensions H-4419.34 (1) regular slide hammer, (1) core sampler (1.5" x
Slide hammers are used for easier penetration
Ship wt. 22lb (8.2kg) 6" or 2" x 6"), (1) plastic liner, (2) plastic end caps,
and extraction of soil samplers and probes. The
(1) cleaning brush, (1) universal slip wrench, and
Soil Auger Kits, Quick-Connect Hammer consists of steel tubing that slides over a
(2) adjustable wrenches. All the components fit
These soil auger kits are complete, compact set- hardened steel rod, which is threaded to 5/8" NC
securely in a foam-lined, poly-reinforced deluxe
ups for augering to depths of 12' or 16'. Soil to accommodate drive rods and extensions. Soft,
carrying case with handles and wheels for added
auger kits include (1) regular and (1) mud auger, baked-on rubber coating and ball-grip handle
portability.
(4) extensions, an 18" rubber-coated cross handle, reduces shock to operator's hands and increases
and a flexible, poly-canvas carrying case for easy 2.25" Basic Soil Sampling Kit H-4416.2 comfort.
transport and storage. These are supplied with 3.25" Basic Soil Sampling Kit H-4416.3 Regular Slide Hammer, 5/8" Threaded H-4451
quick-connect connections. Ship wt. 56lb (26kg)
Compact Slide Hammer, 5/8" Threaded H-4452
2.25" Augers with (4) 3' Extensions H-4418.23 Ship wt. 9lb (4.1kg)

2.25" Augers with (4) 4' Extensions H-4418.24 Universal Slip (Strap) Wrench
3.25" Augers with (4) 3' Extensions H-4418.33 Great tool for the field. Can be used to loosen or
3.25" Augers with (4) 4' Extensions H-4418.34 uncouple auger and penetrometer extensions, as
Ship wt. 21lb (8.6kg) well as any other round or irregular-shaped tools
and test apparatus.
Universal Slip (Strap) Wrench H-4453
Ship wt. 3lb (1.3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

30
Probes, Sampling Augers SOIL-FIELD

H-4252 Series

H-4252
Detail

H-4269

H-4188F
H-4251
H-4188 H-4252.2E
H-4362
H-4250
H-4268
H-4202.6A

Probe Rod, Steel Auger Set, Quick-release Handle and Bucket Soil Sampling Tube Set
Ideal for locating buried pipes, tanks and util- Set includes a 3.25" windowed, auger head of zinc- Tube sets are helpful and functional for agricultural
ity lines. Zinc-plated steel, 36" (914mm) x 0.5" plated steel, auger T-handle, 36" (914mm) auger and other soil-testing procedures. Sampling tube
(12.7mm) shaft. extension and (2) Quick-release connector Pins. will produce 15" (381mm) core of soil. Includes 18"
Probe Rod, Steel H-4188 Auger Set, QR Handle and Bucket H-4202.6A (457mm) long, 7/8" (22mm) ID sampling tube, han-
Ship wt. 8lbs (2.2kg) Ship wt. 8lbs (2.2kg) dle and carrying case.
Probe Rod, Fiberglass Soil Sampling Tube Set H-4269
Description Model
Ship wt. 2.7lbs (1.4kg)
Ideal for locating buried pipes, tanks and util-
Auger Extension, 36" (914mm)
ity lines. Light, non-conductive fiberglass 48" H-4202.5 Soil Sampling Auger Tube Set
with Connect Pin for H-4202.6A
(1219mm) x 0.5" (12.7mm) shaft. Set contains auger and sampling tube. Compo-
Attachment Pins H-4202.8 nents are plated steel to resist abrasive action of
Probe Rod, Fiberglass H-4188F
Ship wt. 8lbs (2.2kg) T-Handle Auger, Iwan-Type soil. Includes 1.25" (25mm) dia. by 12.5" (318mm)
ASTM D1452 long auger, 1" (approx. 25mm) OD by 12.5"
Soil Sampling Auger, Spiral-Type
(318mm) long sampling tube, two 12" (305mm)
ASTM D1452 T-handle augers are also known as post-hole,
extension rods, handle and a fiberboard carrying
For use in sampling soils, auger has 1.5" dia. x 4" Iwan-type or non-adjustable augers. Feature 36"
case.
long (38mm x 102mm) spiral-type auger bit. Fea- (914mm) long steel shaft and hardwood cross han-
tures graduation marks every 6" (152mm). Overall dle. Available 2" (51mm) to 6" (152mm) diameter. Soil Sampling Auger Tube Set H-4268
Ship wt. 5.4lbs (3.2kg)
length is 36" (914mm), including handle. Screw-on Overall length 48" (1219mm).
handle permits attachment of H-4251 extension Auger, Iwan-Type- 2" Dia. (51mm) H-4252.2
for sampling beyond 36" depths. Auger, Iwan-Type- 3" Dia. (76mm) H-4252.3
Soil Sampling Auger, Spiral-Type H-4250 Auger, Iwan-Type- 4" Dia. (102mm) H-4252.4
Ship wt. 5lbs (2.7kg) Auger, Iwan-Type- 6" Dia. (152mm) H-4252.6
Ship wt. 8lbs (3.2kg)
Description Model
Description Model
Auger Extension, 36" (914mm) H-4251
Auger Extension, 36" (914mm),
Soil Sampling Tube H-4252.2E
includes coupling for H-4252.2
For use in collecting soft soil samples in 0.75" core
Auger Extension, 36" (914mm),
sample size. Depth capacity is about 39". Includes
includes coupling for H-4252.3, H-4252E
sampler tube, one tip, two extension rods, handle
H-4252.4 and H-4252.6
and fiberboard case.
Soil Sampling Tube H-4362
Ship wt. 4.2lbs (2.2kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 31
SOIL-FIELD Earth Drill, Augers, Water Level

H-4050

H-4052A.6
H-4040.150

Power Mechanical Earth Drill 42"Snap-On Augers Water Level Indicator

For soil sampling, construction and more, earth Description Model The Water Level Indicator determines water lev-
augers are gasoline powered and portable. Using els in drainage operations, dams, reservoirs,
1.5" (38mm) Snap-On Auger H-4052A.1
one operator, they allow fast and easy drilling. embankments, wells, bore holes, underground
They feature snap-on or screw-on augers and 2" (51mm) Snap-On Auger H-4052A.2 cavities, or any hydrological/geological work.
extensions. Engine mounted on wheel-base car- 3" (76mm) Snap-On Auger H-4052A.3 Works well with small openings, holes & shafts
rier keeps motor noise and fumes away from the that are not always straight. Compact, self-con-
4" (102mm) Snap-On Auger H-4052A.4
operator. Torque tube eliminates counter torque. tained units feature a jointed design for easy
Features such as the carrier and torque tube offer 6" (152mm) Snap-on Extension H-4052A.6 access to difficult openings. Weighted probe is
greater mobility, beneficial in areas inaccessible to 42" Long augers dig a 36" deep hole. lowered into the opening via high-strength, flex-
large equipment, on slopes and horizontal drill- ible cable. Buzzer & light indicate when water
ing, various standard sampling methods to obtain level has been reached. Readings taken from
36", Full-flighted Snap-On Extensions
material samples. Recoil starter and spring-loaded marked cable to very tip of probe so less than 1
throttle-in-handle assembly provide fingertip Description Model ml of water is displaced. Probe resists false read-
control. Centrifugal clutch, heavy-duty flexible 1.5" (38mm) Snap-On Extension H-4053.1 ings caused by cascading water. Standard mod-
shaft connects to the motor and provides for a els have cables marked in feet, metric models
2" (51mm) Snap-On Extension H-4053.2
smooth operation. Blades and points are tool marked in centimeters.
steel, hard-surfaced and heat treated. Blades are 3" (76mm) Snap-On Extension H-4053.3
Water Level Indicator, 150ft. H-4040.150
reversible for longer life. Most augers are snap-on 4" (102mm) Snap-On Extension H-4053.4 Water Level Indicator, 300ft. H-4040.300
design; smaller diameter augers are screw-on. 6" (152mm) Snap-On Extension H-4053.6 Water Level Indicator, 500ft. H-4040.500
Auger has either 5HP or 8HP, 4-cycle engine with Water Level Indicator, 50m H-4040.50M
10:1 gear ratio, complete with wheel kit and torque Water Level Indicator, 100m H-4040.100M
tube. Order augers and extensions separately. For Tube Extensions
Water Level Indicator, 150m H-4040.150M
augers 1.5" to 6" dia., maximum depth is 18' (38 to Description Model Ship wt. 6 to 12lbs (3 to 5kg)
152mm, 5.5m deep). 36" Tube extension
H-4053.7
Power Mechanical Earth Drill, 5hp H-4050 for 3 to 6" Augers
Power Mechanical Earth Drill, 8hp H-4051
18" Tube extension
Ship wt. 225lb (102 kg) H-4053.8
for 3 to 6" Augers

Replacement Points & Blades

Description Model
Point, Screw-on, 1.5" (38mm) H-4055.1
Point, Screw-on, 2" (51mm) H-4055.2
Point, Screw-on, 3" (76mm) H-4055.3
Point, For 4" (102mm) and
H-4055
6" (152mm) Blades
Blade, 4" (102mm) H-4056
Blade, 6" (152mm) H-4057

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

32
Shelby Tubes SOIL-FIELD

H-4210.3C H-4210W

H-4202.7A

H-4202.7A mounted to a
H-4202.1 drive hammer
and a 10" Shelby tube.

H-4210.5P
H-4210.25P

H-4210.3AW

Shelby Tubes Caps for Shelby Tubes Shelby Tubes Heads

ASTM D1587 Plastic end caps for protecting tube and sample. Various heads for different sized Shelby tubes.
Shelby tube samplers are thin-walled, hollow steel Description Model Shelby Tubes Heads See Table
tubes, which are driven into the ground to extract Ship wt. See Table
2" Plastic End Cap H-4210.2C
a relatively undisturbed soil sample for use in lab-
oratory tests used to determine density, permea- 2.5" Plastic End Cap H-4210.25C Description Model
bility, compressibility and strength. Each tube has 3" Plastic End Cap H-4210.3C 2" for AW Rod (wt.4lbs) H-4210.2AW
one end that is chamfered to form a cutting edge 3.5" Plastic End Cap H-4210.35C 2" for AWJ Rod (wt.5lbs) H-4210.2AWJ
and the upper end includes holes for securing the
tube to a drive head. Shelby tubes are useful for 5" Plastic End Cap H-4210.5C 2.5" for AW Rod (wt.6lbs) H-4210.25AW
collecting soils that are particularly sensitive to Caps for Shelby Tubes See Table 3" for AW Rod (wt.13lbs) H-4210.3AW
sampling disturbance, including fine cohesive soils Ship wt. See Table
3" for AWJ Rod (wt.11lbs) H-4210.3AWJ
and clays. The tubes can also be used to transport Expansion Packer for Shelby Tubes 3" for NW Rod (wt.9lbs) H-4210.3NW
samples back to the lab as well. Note: Size is OD. Expanding plugs to seal samples in Shelby tubes
All tubes are 16 gauge steel. 5" for NW Rod (wt.28lbs) H-4210.5NW
for transport.
Description Model Description Model
AW= 3 threads per inch
2" dia x 30" long, (wt.2.5lbs) H-4210.230 2" Expansion Packer H-4210.2P
AWJ= 5 threads per inch
2" dia x 36" long, (wt.3.2lbs) H-4210.236 2.5" Expansion Packer H-4210.25P
2.5" dia x 30" long, (wt.4.2lbs) H-4210.253 3" Expansion Packer H-4210.3P
2.5" dia x 36" long, (wt.5.5lbs) H-4210.256 5" Expansion Packer H-4210.5P
*3" dia x 10" long, (wt.1.9lbs) H-4210.10
Expansion Packer for Shelby Tubes See Table ACCESSORIES
*3" dia x 12" long, (wt.1.9lbs) H-4210.12 Ship wt. See Table
*3" dia x 18" long, (wt.3.0lbs) H-4210.18 Sealing Wax For Knives, Go to page 331
*3" dia x 24" long, (wt.3.8lbs) H-4210.24 ASTM D109 For Pans, Go to pages 326-327
*3" dia x 30" long, (wt.5.1lbs) H-4210.30 Sealing wax to seal ends of shelby tubes for trans-
port. 10 lb. box. For melting pots, please see page
*3" dia x 36" long, (wt.6.2lbs) H-4210.36
190.
3.5" dia x 30" long, (wt.5.5lbs) H-4210.353
Sealing Wax H-4210W
3.5" dia x 36" long, (wt.6.3lbs) H-4210.356 Ship wt. 11lb (5.4 kg)

*5" dia x 24" long, (wt.11.8lbs) H-4210.524 Shelby Tube Head, 3" Tubes
*5" dia x 30" long, (wt.17.5lbs) H-4210.530 Shelby Tube Head for 3" shelby tubes for use with
H-4202.1 or H-4202.1A drive hammers with ”E“
*5" dia x 36" long, (wt.19.5lbs) H-4210.536
rod connection (sold separately, see page 23).
* galvanized
Shelby Tube Head, 3" Tubes H-4202.7A
Shelby Tubes See Table Ship wt. 5.9lb (2.7 kg)

Ship wt. See Table

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 33
SOIL-FIELD CBR, Infiltrometer, Color

HSM-2100

H-4368A

HM-4502

Double Ring Infiltrometer Guelph Permeameter Kit Soil Color Charts

ASTM D3385 ASTM D5126 Munsell soil color charts were developed with the
The Guelph permeameter is an easy-to-use U.S. soil conservation service for classifying soil
Ideal for field testing, as well as lab use. Two stain-
instrument for quickly and accurately measur- color, but may also be used for rocks, archaeolog-
less steel rings measure 12 and 24 dia x 20"H
ing in-situ, hydraulic conductivity in all types ical specimens, and other natural products. Mun-
(304.8 and 609.6 dia x 508mm). Rings have double
of soils. The equipment can be transported, sell charts are a standard tool for geologists, civil
thick welded top edge for increased stability when
assembled, and operated easily by one per- engineers, and soil scientists. The tabbed charts
driving into the soil. A mariotte tube provides a
son. Measurements can be made in 1/2 to 2 include 10R, 7.5R, 5R, 2.5YR, 5YR, 7.5YR, 10YR,
constant head of water for flow tests. Graduations
hours, depending on soil type, and require only 2.5Y, 5Y and 10Y-5GY color ranges. Charts for
on the side of the tube used to determine flow
about 2.5 liters of water. Measurements can tropical and semitropical soils, and for Australia,
rate. Sealed adjusting tube raises or lowers the
be made in the range of 15 to 75cm below the soil SE Asia are now included. A two page Gley chart
head inside the infiltrometer ring. Main flow valve
surface. The Guelph permeameter is a complete for submerged soils covers weak chromas and
in base platform, bleed valve next to adjusting
kit consisting of the permeameter, field tripod, well neutrals of blue and green hues. A white page is
tube seal. Includes: 0.5" thick (12.7mm) aluminum
auger, well preparation and cleanup tools, collaps- used to describe carbonate, silica, gypsum, solu-
driving cap with centering pins; two 6" square
ible water container, and vacuum test hand pump, ble salt participates and more. Openings between
(152.4mm) neoprene splash guards; and two mari-
all packaged in a durable carrying case. chips allow easy visual comparison with soil sam-
otte tubes with 3,000 ml and 10,000 ml capacities.
ples. Illustrations of soil grain structures, charts
Double Ring Infiltrometer HM-4502 Guelph Permeameter Kit HSM-2100
Ship wt. 33lbs (14.9kg)
for estimating proportions of mottles and coarse
Ship wt. 148lbs (72.5kg)
fragments, color name diagrams, and instructions
are furnished. Color chips are mounted on neutral
gray, 7.25 x 4.25"(184 x 108mm) water resistant
pages in an 8 x 6" (203 x 152mm) loose-leaf binder.
Soil Color Charts H-4368A
Ship wt. 1.5lbs (0.5kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

34
Shelby Tubes SOIL-FIELD

H-4388

H-4385
H-4385D

H-4385.5
H-4387
H-4386
H-4386SM H-4385.1

signals that may be present in the earth during Field-collected samples can be immediately
Resistivity Meter, Digital measurement, due to use of narrow band-pass “installed” in the cylinder, as opposed to filling a
ASTM G187, G57; AASHTO T-288 filters. It has a rugged, lightweight weatherproof separate container for transportation. This means
The digital resistivity meter provides soil resistiv- case with an IP67 rating for dust and water intru- that resistance readings taken at a later stage will
ity readings at the push of a button. It provides sion. The lid can be removed to facilitate use and be representative of the “as-found” sample.
a direct read-out of resistance without a need to movement of the meter to new locations with- Soil Cylinder H-4385.5
select ranges or adjust dials. The resistance range out removing test leads. Runs on a set of C-cell Ship wt. 4.6lbs (2.3kg)
is from 0.011 to 10M1 (auto-ranging). The meter alkaline batteries eliminating recharging and Resistivity Test Reel with Soil Pins
provides a high-resolution digital display and plugged-in power sources. Four pin, test reel set for attaining 1-20 ft. depth
is housed in a rugged, hard plastic case— safe Resistivity Meter H-4385 measurements. Can be used with any 4-terminal
for use on wet ground. It provides a blue-tooth Ship wt. 10lbs (5kg) meter. Uses 4-electrode Wenner method. Includes
interface for optional data logging via a blue- Soil Box 4 separate, color-coded wires of varying lengths
tooth-enabled PC. Resistance measurements are The Soil Box can be used with both resistivity from 5 to 65 ft. Jumper leads (2-foot) are supplied
unaffected by any stray interference signals, which meters for a quick and accurate measurement of for connection to meter.
may be present in the soil during readings, due resistivity of a soil or water sample in the field or Resistivity Test Reel with Soil Pins H-4388
to the use of narrow band-pass filters centered at laboratory. Construction is clear plastic with stain- Ship wt. 6.7lbs (3.2kg)
82.2Hz (the unit’s operating frequency). Runs on a less steel current plates and brass potential pins. Soil Pins (Electrodes)
set of replaceable D-cell alkaline batteries with no The dimensions are such that the measured resis- Set of 4 soil pins for use with resistivity meters. Pins
need to periodically recharge the unit or to plug it tivity with the Resistivity Meter, when the box is measure 1/4" x 20" (1.9 x 51cm).
into a power source. Performs 10,000 single read- filled level, can be expressed in ohm-centimeter,
ings on a fresh set of batteries. For data logging Soil Pins (Electrodes) H-4388.1
making calculations unnecessary. The box can also
Ship wt. 3.9lbs (1.8kg)
capabilities, the meter is supplied with an “over- be used with other meters. H-4386: 8.75" x 1.5" x
the pipe” soil resistivity survey program, known as Soil Box Leads, set of 4
1.25" (222 x 38 x 32mm) and H-4386SM: 4.375" x
“ProCP soil resistivity”, based on the 4-Pin Wenner Set of 4 wire leads for use with resistivity meters to
1.125" x 1.5" (111 x 29 x 38mm)
methodology. connect to soil boxes. Leads are 4 ft. (122 cm) long.
Soil Box, 280ml Capacity H-4386
Accuracy: Soil Box Leads, set of 4 H-4387
Soil Box, 75ml Capacity H-4386SM
Ship wt. 0.7lbs (0.3kg)
0.011 to 1M1 range: ±1.6% ±1LS Display Digit Ship wt. 1.3lb (0.5kg)
1M1 to 10M1 range: ±5% ±1LS Display Digit Resistivity Meter Test Kit
Soil Cylinder
ASTM G187, G57; AASHTO T-288
Resistivity Meter, Digital H-4385D ASTM G187; AASHTO T-288
Ship wt. 10.5lbs (5kg) The Soil resistivity test kit is designed to conve-
The Soil Cylinder can be used to satisfy either of
niently store and carry all that is necessary to per-
Resistivity Meter, Analog the 2-electrode methods— ASTM G187 or
form the Wenner Four-Pin Method, as outlined in
ASTM G187, G57; AASHTO T-288 AASHTO T-288 Standards. The body of the Soil
the ASTM G57-06 Standard, as well as the Soil-
The resistivity meter can be easily used to mea- Cylinder is made of clear acrylic with PVC com-
Box Method. The kit includes: (1) large Soil Box;
sure resistivity of soil in-situ using the 2, 3, or 4 ponents and the distribution plates (conducting
Soil container test leads set, (1) set of 4-Pin Test
electrode method or with a soil box to measure end plates) are stainless steel. Rubber O-rings
Reel leads; 4-Pin soil resistivity test reel, (4) Heavy-
resistivity of soil or water in the range of distilled provide sealing for the two end caps. Accommo-
duty, stainless steel, 18" long, T-handle, Soil pins
to sea water. Resistance measurement range is dates large sample volumes [approximately 2,714
and carrying case. Order Resistivity Meter
from 0.011 to 1.1M1 and resistance measure- cm³ (2.714 liters) and can accommodate crushed-
separately.
ments are unaffected by any stray interference rock samples, as well as regular soils and liquids.
Water can be added in-situ for sample saturation Resistivity Meter Test Case H-4385.1
Ship wt. 10lbs (6kg)
(de-ionized water, simulated rain water etc.)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 35
SOIL-FIELD CBR,
CBR,, Infiltrometer,
Infiltro
ome
ete
er,, C
Color

H-4965A

H-4377
H-4967
H-4966
® ®
Speedy 2000 Moisture Tester, 20g Speedy 2000 Moisture Tester, 6g Replacement Parts for Speedy
ASTM D4944; AASHTO T217; Florida FM5-507 The Series 2000 Speedy 6g moisture tester pro- Description Model
The Series 2000 Speedy moisture tester is a porta- vides moisture testing for smaller 6g samples of
Portable Scale, 200g x 0.1g H-4967.1
ble system for measuring the moisture content of a material. The tester is supplied complete with
heavy-duty plastic carrying case, electronic bal- Beaker, 60ml Plastic H-4967.2
wide range of materials including soils, aggregates,
dust and powders (and liquids). The system con- ance, beaker, cleaning cloth, cap, washer, scoop Gauge, replacement H-4963G
sists of a low pressure vessel fitted with a pressure and cleaning brushes. This model is not ASTM Gauge, gasket- 0.75" OD H-4963.11
gauge and an electronic scale and test accesso- compliant and does not include the steel pulver-
Speedy Scoop H-4963.15
ries. Moisture measurements are made by mixing izing balls. Does not include calcium carbide
a weighed sample of the material with a calcium reagent, See hazardous material warning. Speedy Brush, wire handle H-4963.16A
carbide reagent in the sealed pressure vessel. The ®
Speedy 2000 Moisture Tester, 6g H-4968 Brush, for scale pan H-4963.14
reagent reacts chemically with water in the sample, Shipping wt. 15 lbs (5.9kg)
Pulverizer, steel ball H-4963B
producing acetylene gas that in turn increases the
pressure within the vessel. The pressure increase in Acidity and Moisture Tester
HAZARDOUS WARNING:
the vessel is proportional to the amount of water Provides the ability to make on-the-spot in field
Danger of explosion/fire may result if Moisture Test-
in the sample, the moisture content can be read ing Reagent is allowed contact with moisture. Calcium or lab tests for soil acidity in moist soil. Measures
directly from the calibrated pressure gauge. The carbide forms flammable acetylene gas when wet so it pH and moisture content (% relative saturation).
must be kept sealed and dry. Provide adequate venti- The Kelway tester operates on the principle of
tester is supplied complete with heavy-duty plastic
lation and use away from sparks and flame. electrical potential between two dissimilar metal
carrying case, electronic balance, beaker, cleaning
U.S. shipping regulations now require truck shipment plates - without batteries or any external power
cloth, cap, washer, scoop, steel pulverizing balls for all quantities of calcium carbide. For this reason we
and cleaning brushes. Does not include calcium no longer provide testing reagent (calcium carbide)
source. When inserted into moist soil it registers
carbide reagent, See hazardous material warn- with Speedy Moisture Testers. To purchase calcium the degree of acidity on the upper scale. The lower
ing on this page. carbide for use with Speedy testers, please order scale shows degree of moisture (% saturation)
H-4966, which is a case of 24, 1 lb (0.5kg) canisters. when the switch button is held in. Tester is supplied
Description This item requires shipment by truck.
with belt-loop case, two 3" x 4" (76 x 102mm) con-
International shipping regulations require separate
Accuracy Within 0.5% on most materials ditioning film sheets and instructions. Not for use
purchase of reagent, which requires "dangerous
goods" papers and packing. For this reason, Speedy with liquids.
45 sec. to 3 min., depending
Test Speed Moisture Testers for International orders do not con- Acidity and Moisture Tester H-4377
on material
tain reagent, order separately. Ship wt. 2lbs (1kg)
Calibrated from 0-20% mois-
Gauge Acidity and Moisture Tester Conditioner Film
ture based on wet weight Moisture Tester Reagent
Conditioning film sheets for Acidity and Moisture
Electronic; 0-7 oz (0-200g) Calcium carbide reagent for Speedy® Moisture Tes-
Balance Tester. Package of 12.
range; battery operated ters. Carton of 24-1 lb. (0.5kg) containers. Shipped
Conditioner Film (12 pk) H-4377.1
via motor freight only. See Hazardous Warning.
Ship wt. 1lbs (0.5kg)
Moisture Testing Reagent H-4966
Speedy® 2000 Moisture Tester, 20g H-4967
Ship wt. 28lbs (12.7kg)
Shipping wt. 16.6 lbs (7.5kg)
Calibration Kit for Speedy® Tester
A self-contained unit designed to enable an oper-
ator to check the accuracy of the Speedy Moisture
Tester. The unit is comprised of a master dial, inte-
gral air pump, control connections and tools for
checking accuracy and pressure leaks, with instruc-
tions for simple re-calibrations. Includes case.
Calibration Kit for Speedy® Tester H-4965A
Ship wt. 20lbs (9.1kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

Aggregate Crushing Value . . . . . . . . . 70
AGGREGATE
Sample Splitters . . . . . . . . . . . . 38-41
Aggregate Impact Value . . . . . . . . . . 70 Screen Shakers. . . . . . . . . . 42-44
Aggregate Washers . . . . . . . . . . . . 57 Screen Trays . . . . . . . . . . . . . . 44
Classification . . . . . . . . . . . . . . 66 Sieve, Air Jet . . . . . . . . . . . . . . 61
Coatings Testing . . . . . . . . . . . . . 71 Sieve Shakers . . . . . . . . . . . . . 58-60
Hoek Cell . . . . . . . . . . . . . . . 71 Sieves . . . . . . . . . . . . . . . . 45-57
L.A. Abrasion . . . . . . . . . . . . . . 67 Sieves, Calibration Test Sieves . . . . . . . 50-51
Micro-Deval. . . . . . . . . . . . . . . 68 Sieves, Inspection Test Sieves. . . . . . . . 48-49
Moisture . . . . . . . . . . . . . . . . 65 Sieves, Wet Washing. . . . . . . . . . . 56-57
Point Load Tester . . . . . . . . . . . . . 70 Slake . . . . . . . . . . . . . . . . . 67
Rock Testing . . . . . . . . . . . . . 69-71 Specific Gravity . . . . . . . . . . . .ÊÊÊÊÊÊÊÊÊÊÊÊ 62-64
38
Sample Splitters AGGREGATE

H-3962, H-3964

H-3980, H-3985

H-3970,
H-3966, H-3987, H-3989, H-3975
H-3990, H-3992

Humboldt Sample Splitters

Material Chutes Hopper Ship Steel Pan Stainless Steel Pan

Model Size Pans wgt.
Number Width
LxW (incl.) Pan Model #
L x W x H"
Pan Model #
L x W x H"
(max.) inches (mm) lbs. (kg) (mm) (mm)

One-Piece Construction Sample Splitters Replacement Pans for Sample Splitters

0.25" .375" 8" x 6.75" 2 lb 8.0" x 5.25" x 4.25" 6.5" x 5.875" x 4.5"
H-3962 14 4 H-3981 H-3981S
(6.3mm) (9.52mm) (203 x 171mm ) (6.3 kg) (133 x 203 x 108mm) (165 x 149 x 114mm)
0.33" .500" 11" x 6.75" 2.7 lb 5.5" x 10.5" x 4.5" 11.25" x 6.5" x 5.5"
H-3964 (8.4mm)
14 (279 x 171mm)
4 (7.7 kg) H-3986
(140 x 267 x 114mm)
H-3986S (286 x 165 x 140mm)
(12.7mm)
0.50" .750" 14.75" x 6.75" 3 lb 13.25" x 5.125" x 6.625"
H-3966 14 (375 x 171mm)
4 (12.3 kg)
NA NA H-3967S
(337x 130 x 168mm)
(12.7mm) (19mm)

0.66" 1.00" 20" x 9" 5.9 lb 6.375" x 19" x 4.875" 16.375" x 6.5" x 5.25"
H-3987 16 (508 x 229mm)
4 (14.1 kg) H-3988
(162 x 483 x 124mm)
H-3988AS (416 x 165 x 133mm)
(16.9mm) (25.4mm)

1.33" 2.00" 19.5" x 9.5" 5.9 lb 6.375" x 19" x 4.875" 16.375" x 6.5" x 5.25"
H-3989 8 (495 x 241mm)
4 (12.3 kg) H-3988
(162 x 483 x 124mm)
H-3988AS (416 x 165 x 133mm)
(33.8mm) (50.8mm)

1.00" 1.50" 20" x 9" 5.9 lb 6.375" x 19" x 4.875" 16.375" x 6.5" x 5.25"
H-3990 (25.4mm)
10 (508 x 229mm)
4 (22.7 kg) H-3988
(162 x 483 x 124mm)
H-3988AS (416 x 165 x 133mm)
(38.1mm)

1.67" 2.50" 24" x 9" 4.5 lb 22" x 5.125" x 6.75"

H-3992 (42.3mm)
8 (610 x 229mm)
4 (22.7 kg)
NA NA H-3993S
(559 x 130 x 171mm)
(63.5mm)

Removable Hopper Sample Splitters

0.33" .500" 11" x 8.5" 2 lb 5.25" x 8.0" x 4.25" 6.5" x 5.875" x 4.5"
H-3980 (8.4mm)
12 ( 279 x 216mm)
4 (8.2 kg) H-3981 (133 x 203 x 108mm)
H-3981S (165 x 149 x 114mm)
(12.7mm)
0.50" .75" 14" x 8.5" 2.7 lb 5.5" x 10.5" x 4.5" 11.125 x 6.5 x 5.5"
H-3985 12 (356 x 216mm)
4 (9.5 kg) H-3986
(140 x 267 x 114mm)
H-3986S (283 x 165 x 140mm)
(12.7mm) (19mm)

Enclosed Sample Splitters

0.25" .375" 8" x 6.5" 2.1 lb 7" x 5.75" x 3.75"
H-3970 (6.3mm)
14 (203 x 165mm)
2 (10 kg)
NA NA H-3977S (178 x 146 x 95mm)
(9.52mm)

0.25" .375" 11" x 4.5" 5.5 lb 11.875" x 5" x 6.125"

H-3975 (6.3mm)
24 (279 x 114mm)
2 (12.7 kg)
NA NA H-3976S (302 x 127 x 156mm)
(9.52mm)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 39
AGGREGATE Sample Splitters

H-3971C
H-3973 H-3974

Chutes Hopper Pan

Hopper Size Volume Pans Capacity Ship wt. Model Pan
Width L x W— inches (mm) (furnished) lbs. (kg)
Number cu. inch (mm) cu. inch (mm)
in. (mm)

16 .125" (3.2) 4.5" x 4.5" — 2 — 3.7 lbs H-3971C H-3972

(114 x 114mm) (3.2 Kg)

32 .25" (6.4) 8.9" x 8.3" 160 2 160 15 lbs H-3973 H-3973.1

(226 x 211mm) (10.4 Kg)

22 .375" (9.5) 8.5" x 7.0" 100 2 100 15 lbs H-3978 H-3973.1

(216 x 178mm) (10.4 Kg)

16 .5" (13) 8.8" x 8.0" 150 2 150 13 lbs H-3974 H-3973.1

(224 x 203mm) (9.5 Kg)

H-3994

H-4135

Humboldt Sample Splitters (See Previous Page) 16-1 Sample Reducer Micro and Precision Riffle Splitters & Pans
ASTM B215, C136, C702, C778, D421, D424, ASTM C136, C702, C778, D75; AASHTO T27, T248 Micro and precision riffle splitters (Jones Type) are
D457, D806, AASHTO T27, T144, T248 The Sample reducer is used to cut a 1/16th designed to reduce bulk material into a convenient
Riffle-type sample splitters divide or halve dry representative sample of a larger material sample representative sample for laboratory analysis. A
materials such as cement, gravel, powdered ores, by eliminating parts of the sample as it flows down hopper, with a manual control gate, receives the
coal, coke, sand, soils, etc. Material poured into an adjustable 45° or 60° incline. The adjustable material to be split, then upon opening the gate,
the hopper is divided into two equal portions 0.25ft3 (7.1L) hopper can be used in batch mode the material flows through a series of equally
by a series of chutes that discharge the material or left open when larger samples are needed . divided compartments or chutes, sending 50%
alternately in opposite directions into separate of the sample to the left-side pan and 50% of
Produces a 10-lb., or greater, representative
pans. Humboldt splitters are constructed of cold- the sample to the right-side pan. These splitters
sample with a maximum particle size of .5" (13mm).
rolled steel, or in some cases, stainless steel— see consist of a stainless steel hopper with a manually
Reducer cuts out 1/16th of the material fed through
chart below for quantity and construction of pans actuated flow gate, stainless steel and anodized
the unit in one pass. (a one-pound sample can be
included. Also refer to the chart below for ordering aluminum riffle bank, and stainless steel frame with
obtained from a 256-pound original sample by
replacement or extra pans. All splitters include support legs. Two (2) aluminum high-back (notched
passing it through twice). Overall dimensions are:
pans, scoop and cleaning brush. See chart below L-shape) pans are supplied with the H-3971C micro
27" x 18" x 36" (686 x 457 x 914mm)
for product details on specific models. splitter and two (2) stainless steel sample pans are
Unit is supplied without sample containers. Order supplied with the H-3973, H-3974 and H-3978
One-Piece Construction Sample Splitters containers below. precision splitters.
For rapid, single-step reduction of large sample 16-1 Sample Reducer H-3994 Micro & Precision Splitters see chart
volumes— ideal for field applications. See models: Shipping wt. 29.3 lbs (13kg) Shipping wt. see chart
H-3962, H-3964, H-3966, H-3987, H-3989, H-3990, Container Set for 16-1 Sample Reducer Quartering Canvas
H-3992. Container set includes heavy, painted steel ASTM C702; AASHTO T248
Removable Hopper Sample Splitters rejects pan that measures: 22" x 13" x 11" (559 Heavy-duty quartering canvas for use in selecting
Same design as the one-piece splitters except x 330 x 279mm) and a lightweight 12 qt. (11L) and quartering soils and aggregates. All edges are
these have a removable hopper for easier cleaning. polyethylene sample container, 10" dia. x 11.5 "H seamed and stitched. H-4135 does not comply
See models: H-3980 and H-3985. (254 x 292mm) with lid. with ASTM or AASHTO specs.
Enclosed Sample Splitters Container Set for 16-1 Sample Reducer H-3996S 6' x 8' (2m x 2.4m) ASTM Canvas H-4136
Shipping wt. 12 lbs (5.4kg)
Enclosed sample splitters are ideal for dusty 5' x 5' (1.5m) Square Canvas H-4135
Shipping wt. 4.5 lbs (2kg)
samples, including coal, coke and chaff. See
models: H-3970 and H-3975.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

40
Sample Splitters AGGREGATE

H-4288
H-4393 H-4288FC H-4289 H-4290

Maximum Hopper Chute Bar Chute Bar Chute Dimensions

Model Gilson # Particle Size Size Pans
in. (mm) Capacity ft3 (L) Quantity Slope L x W x H inches (mm) Replacements
in. (mm)
H-4393 SP-0 6 (152) 3.5 (99.1) 1 (25) 48 60° 56 x 26 x 41 (1422 x 660 x 1041) H-4393.2
H-4288 SP-1 4 (102) 1 (28.3) 0.5" (13) 48 45° 29 x 19 x 39 (737 x 483 x 991) H-4288.2
H-4288FC SP-1C 4 (102) 1 (28.3) 0.5" (13) 10 Fixed 45° 29 x 19 x 39 (737 x 483 x 991) H-4288.2
H-4289 SP-2 2 (51) 0.55 (15.6) 0.5" (13) 36 45° 22 x 14.5 x 20.5 (559 x 368 x 521) H-4289.1
H-4290 SP-2.5 0.75 (19) 0.28 (7.9) 0.25" (6) 48 60° 15.5 x 12.5 x 17.5 (394 x 318 x 445) H-4290.1
H-4291 SP-3 0.25 (6) 0.06 (1.7) 0.125" (3) 48 60° 9.5 x 8.5 x 13.5 (214 x 216 x 343) H-4291.1
H-4293 SP-10 0.25 (6) 0.06 (1.7) 0.125" (3) 48 60° 29 x 19 x 39 (737 x 483 x 991) H-4288.2

Universal Splitter Universal, Fixed Chute Sample Splitter Versa-Splitter

ASTM C136, C702, C778, D75; AASHTO T27, T248 ASTM C136, C702, C778, D75; AASHTO T27, T248 ASTM C136, C702, C778, D75; AASHTO T27, T248
The H-4393 universal splitter is built for large- Fixed chute version of the H-4288 universal sample The Versa-Splitter can be used for fine aggregates
volume bulk aggregate or raw coal samples. Other splitter. Features ten, 2.25" (57mm) fixed-width up to .75" (19mm) aggregate. Contact parts and
large samples with particle sizes up to 6" (152mm) chutes. Includes gate release 1 ft3 (28.3L) hopper. pans are stainless steel except for aluminum chute
can be accurately reduced with this rugged divider. Includes 2 pans. See chart for more information. bars, which are anodized for corrosion resistance.
Each split is evenly distributed to two pans on each Universal-Sample Splitter H-4288FC Includes 2 pans. See chart for more information.
side of the splitter. All four pans are included. The Shipping wt. 136 lbs (75kg) Versa-Splitter H-4290
H-4393.1 lift cart is recommended for handling Universal Splitter Shipping wt. 40 lbs (18kg)

fully-loaded pans. ASTM C136, C702, C778, D75; AASHTO T27, T248 Mini-Splitter
Universal Splitter H-4393 The H-4289 universal splitter is compact and ASTM C136, C702, C778, D75; AASHTO T27, T248
Shipping wt. 68 lbs (31kg) more durable than conventional portable splitters. The smallest of the bench-top units is all stainless
Universal Sample Splitter Lightweight with ample hopper capacity of 0.55 steel except for aluminum chute bars and pans.
ASTM C136, C702, C778, D75; AASHTO T27, T248 ft3 (15.6 liters) for materials up to 2" (51mm). It is Can be used to split powders to .25" (6.4mm)
The universal sample splitter is a rugged, large- convenient to use in floor or bench-top positions. aggregate. The 104 in.3 (1.7L) hopper has a .375"
capacity floor model for laboratory or field use This splitter provides accurate, representative (9.5mm) bottom opening with a spring-loaded
with materials with particle sizes up to 4" (102mm). samples o a wide range of materials. gate release. Includes 2 pans. See chart for more
The convenient size and a wide range of available Porta-Splitter H-4289 information.
Shipping wt. 66 lbs (31kg)
accessories make the H-4288 a very versatile Mini-Splitter H-4291
Shipping wt. 12 lbs (7kg)
splitter. See next page for accessories.
Universal-Sample Splitter H-4288
Shipping wt. 135 lbs (75kg)

Chute Width - inches

Model
.125 .25 .375 .5 .75 1 1.5 2 3 4 6
Number of Chutes

H-4291 48 24 16 12 8 6 4 - - - -
(openings)

H-4290 - 48 - 24 16 12 8 6 4 - -
H-4289 - - - 36 - 18 12 - - - -
H-4288 - - - 48 - 24 16 12 8 6 4
H-4293 - - - 48 - 24 16 12 8 6 4

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 41
AGGREGATE Sample Splitters

H-4291 H-4293 H-4287 H-4394

Totally Enclosed Splitter Porta Wheels for H-4288 Quadri-Splitter

ASTM C136, C702, C778, D75; AASHTO T27, T248 Set of two wheels. ASTM C702, D346, D2013, E276, E389, E877
A totally enclosed version of the H-4288 universal Porta Wheels for H-4288 H-4288.1 The H-4394 Quadri-Splitter efficiently divides free-
Shipping wt. 4 lbs (1.8kg)
splitter. Hinged doors provide access to hopper flowing material into four representative fractions in
and pans while keeping dust to a minimum. Unlike California Sample Splitter a single pass. The totally enclosed design controls
other enclosed splitter designs, the H-4293 is CalTrans C201 dust and reduces moisture loss, while sample loss
designed so that all splitting operations are done Designed and constructed for the California is minimized by fewer passes and less handling.
in the enclosed splitter, including initial dumping Department of Transportation. For use with 1.125" Units yield four representative samples for a total
of the sample pan. Bottom pans are also enclosed. (28.6mm) to sand-sized aggregate. Large capacity, sample capacity of 1.6ft3 (45.3L). The unique tilt-
Totally Enclosed Splitter H-4293 1.9 Cu. Ft. (53.8L) gate release hopper. Ten 2.25" feeding mechanism lifts and rotates the removable
Shipping wt. 370 lbs (168kg) (57.2mm) fixed chutes process particle sizes up to feed pan to the hopper opening where it seals to
Lift Cart Accessory for H-4393 1.125" (28.6mm). Sturdy, heavy-gauge steel frame the hopper inlet as the material is dumped. Sample
Recommended lift cart for handling fully-loaded with painted and baked finish is built for extended pans are sealed to splitter body, yet easily slide
pans. service life under heavy use. Four swivel casters out. Hinged doors on both sides of the body allow
Lift Cart Accessory H-4393.1 permit mobility and easy storage in busy, crowded inspection and cleaning of chute sections.
Shipping wt. 15 lbs (6.8kg) labs. Two 1.2 Cu. Ft. (34L) capacity, welded-steel The three chute decks each have fourteen chutes
Dust Enclosures sample pans are included. Reinforced pans have of 1in (25.4mm) width and 60° slope for smooth
Optional dust enclosure accessory consists of two sturdy handles at each end for safe and convenient sample flow, making the H-4394 ideal for coal and
stainless steel panels held to front and back of the handling of heavy samples. Overall dimensions: coke testing. One pass yields four 1/4 fractions,
unit by springs. 29" x 28" x 46" (737 x 711 x 1168mm). each of which can be split again if needed to
Dust Enclosure for H-4288 H-4288.7 California Sample Splitter, steel pans H-4287 reduce bulk samples to amounts required for lab
Dust Enclosure for H-4290 H-4290.5 California Splitter, aluminum pans H-4287.AL tests. Three passes will yield a 1/64 sample that is
Dust Enclosure for H-4291 H-4291.5 Shipping wt. 244 lbs (111kg)
still representative of the whole. H-4394 Quadri-
Shipping wt. 20 lbs (6.8kg) California Sample Pans Splitters have all quality stainless steel contact
60° Chute Adapter Kit Sample pans for California sample splitter. parts (chutes and pans). Other parts are heavy
Adapts 45° chutes to 60° for more efficient Steel Pan H-4287.1 gauge galvanized steel, spot welded, riveted and
processing of difficult samples. Aluminum Pan H-4287.2 painted for long life and durability.
Shipping wt. 20 lbs (9kg)
60° Adapter Kit for H-4288 H-4288.4 Quadri-Splitter H-4394
60° Adapter Kit for H-4289 H-4290.4 Shipping wt. 330 lbs (150kg)
Shipping wt. 8 lbs (3.6kg)

Bag Loading Chute Attachment

Replaces one pan to permit direct loading of
material into a bag or container.
Bag Loading Chute for H-4288 H-4288.3
Shipping wt. 6 lbs (2.7kg)

Fixed Chute Accessory

Converts H-4288 into a fixed-chute splitter with
ten, 2.25" (57mm) fixed-width chutes.
Fixed Chute Accessory H-4288.8
Shipping wt. 15 lbs (6.8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

42
Screen Shakers AGGREGATE

H-4283A H-4276A H-4273B

Gilson Testing Screens Gilson testing screens are sold without screen Test-Master screen shakers are available in a six
ASTM E11; ISO 565 trays or dust pans, which need to be purchased and a seven-screen tray capacity models. Both
Gilson testing screens are ideal for particle size separately for operation. Specify sizes when units feature the same reliable counterbalanced
determinations on large samples of aggregate, ordering. In both models, the dust pan may drive assembly, fully enclosed operation and
slag, ores, and many other coarse materials. Batch optionally be placed on the bottom shelf of the electronic digital controller as our previous models.
sizes up to one cubic foot (0.028m³) or more can unit, freeing up an additional slot for a screen tray. Sample vibration characteristics are identical to
be processed into six fractions in as little as three Screen Trays for the Testing Screens feature a Testing Screen Shakers and the screen trays are
to five minutes, depending on material type. generous 14.75" x 22.75" (375 x 578mm), 2.33ft³ interchangeable. Internal rotating counterweights
Vibration and amplitude characteristics are fixed at (0.22m³) clear screen area. Optional dustpan of the Test-Master® drive system equalize the
optimum settings for mineral aggregates in the 4" configurations can be ordered for increased vertical screening action to assure smooth, quiet
(101mm) to No.4 (4.75mm) size range, but options capacity, reduced dust output, or dispensing of operation and prevent transfer of vibrations to
and accessories are available to optimize machine fines directly into outside bag or container. Other other lab instruments.
performance when testing finer samples or special accessories to facilitate sample handling, dust Gilson Test-Master® screens are sold without
materials. The standard testing screen can be used and noise control and separation performance are screen trays or dust pans, which need to be
to process material all the way down to No.200 listed separately. These models feature 6-tray purchased separately for operation. Specify sizes
(75μm) if less efficient separations are acceptable. slots and a bottom shelf, which allows for up to when ordering. In both models, the dust pan may
These testing screens are available in two 6 trays and a dust pan to be used. Order screen optionally be placed on the bottom shelf of the
variations of clamping mechanism: a manually- trays and dust pans separately. unit, freeing up an additional slot for a screen tray.
operated, screw-type clamping handle, which is Hydraulic-Clamping, 120V 60Hz H-4283A Screen trays for the Test-Master® screens feature a
more economical, but slightly more labor-intensive Hydraulic-Clamping, 220V 50Hz H-4283A.5F generous 14.75" x 22.75" (375 x 578mm), 2.33ft³
for continuous use; and, a quick-acting hydraulic (0.22m³) clear screen area. Optional Dustpan
pump system used to clamp the screen trays in Manual-Clamping, 120V 60Hz H-4276A configurations can be ordered for increased
place. Trays are quickly secured and released using Manual-Clamping, 220V 50Hz H-4276A.5F capacity, reduced dust output, or dispensing of
Shipping wt. 485 lbs (220kg)
the same single handle. This more efficient model fines directly into outside bag or container. Other
®
is recommended for labs with a steady workload of Gilson Test-Master Screen accessories to facilitate sample handling, dust
particle size testing. ASTM E11; ISO 565 and noise control and separation performance are
Both models use an enclosed drive mechanism The redesigned Test-Master® testing screen now listed separately. H-4273B models feature 6-tray
for added safety. The powerful 1/2hp capacitor- features an easily controlled, integrated hopper capacity and H-4274B models feature 7-tray
type motor is operated through a starting switch for easier introduction of sample material and capacity. Order screen trays and dust pans
with built-in overload protection. Gilson testing vertically-hinged front panel doors for improved separately.
screens are designed to be mounted to a solid, access and clearance. The 1.6ft³ (45.3L) hopper
Hydraulic-Clamping, 6-Tray, 120V 60Hz H-4273B
rigid floor system. Securing with anchor bolts to is hinged at the rear and allows the sample to
Hydraulic-Clamping, 6-Tray, 220V 50Hz H-4273B.5F
a concrete floor is recommended. Dimensions for be introduced incrementally as the machine is
anchor bolt placement are available upon request. running. When the hopper is closed, a panel blocks Hydraulic-Clamping, 7-Tray, 120V 60Hz H-4274B
Overall Dimensions: 23" x 31" x 43" (584 x 787 x dust from escaping through the opening. The Hydraulic-Clamping, 7-Tray, 220V 50Hz H-4274B.5F
narrower panel doors require less space to open Shipping wt. 700 lbs (318kg)
1,092mm), W x D x H.
and fold flat across the front of the unit. The doors
also feature a safety interlock switch that disables
the Test-Master® when open.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 43
AGGREGATE Screen Shakers

H-4283P3

H-4285
H-4288.1

H-4273DP

H-4284, H-4284.5
H-4283P4

H-4295A
H-4297A
H-4286

H-4273CP H-4307 H-4283SE

Gilson Porta-Screen® Screen Shaker are enclosed by the enameled steel protective Screen Shaker Accessories
ASTM E11; ISO 565 outer case.
Item Part No.
The H-4295A and H-4297A Porta-Screen® screen The H-4295A model features slots for 7 trays
2" (50mm) Standard Dustpan for
shakers have long been the accepted standard and a pan while the H-4297A features slots for
Gilson Screen Shakers (not for H-4283P
portable screens for field control of construction 5 trays and a pan. Order screen trays and dust
use with Porta-Screen model)
aggregates and quality control of asphalt and pans separately.
ready to mix plants. These units are also useful for 3" (75mm) Deep Dustpan for
Porta-Screen® (8 slots), 120V 60Hz H-4295A H-4283P3
size separations of many other materials. Capacity Gilson Screen Shakers
Porta-Screen® (8 slots), 220V 50Hz H-4295A.5F
depends on test material, but may range up to 60 4" Deep Dustpan for Gilson
H-4283P4
lb (27.3 kg) per test. Vibration of both models is Porta-Screen® (6 slots), 120V 60Hz H-4297A Screen Shakers
mechanically counterbalanced for smooth, stable Porta-Screen® (6 slots), 220V 50Hz H-4297A.5F Two-Piece, Stationary Dustpan
operation with no required mounting. Shipping wt. 255 lbs (116kg)
H-4273DP
with Adapter for H-4273B and
Porta-Screen models are designed for performance H-4276A
durability, yet are light enough to be portable. Porta-Screen Accessories
Inclined Chute Pan H-4273CP
Trays are quickly secured for operation by dual Item Part No.
hand clamp levers. When levers are released, trays Manual to Hydraulic Clamp
Porta Sample Pan H-4306 Conversion Kit (serial # 13826 H-4284
are individually removable for emptying, cleaning
and weighing. Porta Cover H-4305 and higher)

The vibrating assembly is held top and bottom Porta Wheels H-4288.1 Manual Hydraulic Clamp
on hardened guide pins. The 1/4hp motor, Porta Screen Dust Pan Tray H-4302 Conversion Kit (serial # 13825 H-4284.5
drive shaft, and connecting rod are synchronized and lower)
with a rotating weight counterbalance system. All Storage Tray Rack H-4285

Screen Shakers Door Enclosure for H-4283,

H-4286
H-4276 Screen Shakers
Model Gilson No. Material Maximum Overall Dimensions
Size Capacity Tray Size inches (mm) Clean-N-Weigh Accessory H-4307
H-4283A TS1 4" (104mm) to Digital Timer H-4296A
23" x 31" x 33"
No. 200 mesh
H-4276A TS2 (584 x 787 x 838) Sound Enclosure H-4283SE
(14.75mm) 1 cu.ft. (0.3m3) 18" x 26"
H-4273B TM5 4" (104mm) to 80 lbs (36kg) (457 x 660mm)
27" x 33" x 45"
No. 200 mesh
H-4274B TM6 (686 x 838 x 1143)
(14.75mm)
19" x 16.5" x 48.3"
H-4295A PS4 .75 cu.ft.
2" (51mm) to 16" x 16.5" (483 x 419 x 1222)
(0.23m3)
No. 200 (75mm) (406 x 419mm) 19" x 16.5" x 42"
H-4297A PS3 60 lbs (27kg)
(483 x 419 x 1067)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

44
Screen Trays AGGREGATE
Screen Trays for Testing Screens
Use these tables to order replacement screen trays, wire cloth and round hole plate screens for
Gilson testing screens, Test-Masters and Porta-Screens— Models: H-4283A, H-4276A, H-4273B,
H-4274B, H-4295A, H-4297A.
ASTM sizes are manufactured to comply with wire cloth specifications of ASTM E11 and
AASHTO M92. Cloth is designated S for plain steel or SS for stainless steel. Replacement
wire cloth is cut to size for specified machines. Trays with cloth No. 16 (1.18mm) and finer
incorporate lateral support ribs or coarse backup cloth to support mesh. Backup cloth may be
added to trays with or without support ribs as desired; and, blank trays (with no cloth) are
also available, call 1.800.544.7220.

Standard ASTM Testing Screen Trays and Cloth

18" x 26" (457 x 660mm) ISO Testing Screen Trays and Cloth
16" x 16.5" (406 x 419mm)
ASTM Cloth Models: H-4273B, H-4274B,
Models: H-4295A, H-4297A, ISO Cloth ISO SCREENS
Sizes Material H-4276A, H-4283A
Sizes Material
Tray/Cloth Cloth only
Tray/Cloth Cloth only Tray/Cloth Cloth only
125mm 5" S H-4278C5.000 H-4278WC5.000 NA NA 112mm SS H-8900TC.112 H-8900C.112
106mm 4.24" SS H-4278C4.240 H-4278WC4.240 NA NA 80mm SS H-8900TC.80 H-8900C.80
100mm 4" S H-4278C4.000 H-4278WC4.000 NA NA 56mm SS H-8900TC.56 H-8900C.56
90mm 3.5" S H-4278C3.500 H-4278WC3.500 NA NA 40mm SS H-8900TC.40 H-8900C.40
75mm 3" S H-4278C3.000 H-4278WC3.000 INQUIRE INQUIRE 28mm SS H-8900TC.28 H-8900C.28
63mm 2.5" S H-4278C2.500 H-4278WC2.500 INQUIRE INQUIRE 20mm SS H-8900TC.20 H-8900C.20
53mm 2.12" SS H-4278C2.120 H-4278WC2.120 INQUIRE INQUIRE 18mm SS H-8900TC.18 H-8900C.18
50mm 2.00" S H-4278C2.000 H-34278WC2.000 H-4398C2.000 H-4398WC2.000 14mm SS H-8900TC.14 H-8900C.14
45mm 1.75" S H-4278C1.750 H-4278WC1.750 H-4398C1.750 H-4398WC1.750 10mm SS H-8900TC.10 H-8900C.10
37.5mm 1.50" S H-4278C1.500 H-4278WC1.500 H-4398C1.500 H-4398WC1.500 9mm SS H-8900TC.9 H-8900C.9
5mm S H-8900TC.5 H-8900C.5
31.5mm 1.25" S H-4278C1.250 H-4278WC1.250 H-4398C1.250 H-4398WC1.250
2.5mm SS H-8900TC.25 H-8900C.25
26.5mm 1.06" SS H-4278C1.060 H-4278WC1.060 H-4398C1.060 H-4398WC1.060
1.25mm SS H-8900TC.125 H-8900C.125
25.0mm 1.00" S H-4278C1.000 H-4278WC1.000 H-4398C1.000 H-4398WC1.000
900μm SS H-8900TC.900 H-8900C.900
22.4mm .875" S H-4278C.875 H-4278WC.875 H-4398C.875 H-4398WC.875
400μm SS H-8900TC.400 H-8900C.400
19.0mm .750" S H-4278C.750 H-4278WC.750 H-4398C.750 H-4398WC.750
160μm SS H-8900TC.160 H-8900C.160
16.0mm .625" S H-4278C.625 H-4278WC.625 H-4398C.625 H-4398WC.625
13.2mm .530" SS H-4278C.530 H-4278WC.530 H-4398C.530 H-4398WC.530
12.5mm .500" S H-4278C.500 H-4278WC.500 H-4398C.500 H-4398WC.500
11.2mm .438" S H-4278C.438 H-4278WC.438 H-4398C.438 H-4398WC.438
9.5mm .375" S H-4278C.375 H-4278WC.375 H-4398C.375 H-4398WC.375
8.0mm .312" S H-4278C.312 H-4278WC.312 H-4398C.312 H-4398WC.312
6.7mm .265" SS H-4278C.265 H-3910WC.265 H-4398C.265 H-4398WC.265
6.3mm .250" S H-4278C.250 H-4278WC.250 H-4398C.250 H-4398WC.250
5.6mm No. 3-1/2 SS H-4278F3-1/2 H-4278WF3-1/2 H-4398F3-1/2 H-4398WF3-1/2
4.75mm No. 4 S H-4278F4 H-4278WF4 H-4398F4 H-4398WF4
4.00mm No. 5 SS H-4278F5 H-4278WF5 H-4398F5 H-4398WF5
3.35mm No. 6 SS H-4278F6 H-4278WF6 H-4398F6 H-4398WF6
2.80mm No. 7 SS H-4278F7 H-4278WF7 H-4398F7 H-4398WF7
2.36mm No. 8 SS H-4278F8 H-4278WF8 H-4398F8 H-4398WF8
2.00mm No. 10 SS H-4278F10 H-4278WF10 H-4398F10 H-4398WF10
1.70mm No. 12 SS H-4278F12 H-4278WF12 H-4398F12 H-4398WF12
1.40mm No. 14 SS H-4278F14 H-4278WF14 H-4398F14 H-4398WF14
1.18mm No. 16 SS H-4278F16 H-4278WF16 H-4398F16 H-4398WF16
1.00mm No. 18 SS H-4278F18 H-4278WF18 H-4398F18 H-4398WF18
850μm No. 20 SS H-4278F20 H-4278WF20 H-4398F20 H-4398WF20
710μm No. 25 SS H-4278F25 H-4278WF25 H-4398F25 H-4398WF25
600μm No. 30 SS H-4278F30 H-4278WF30 H-4398F30 H-4398WF30
500μm No. 35 SS H-4278F35 H-4278WF35 H-4398F35 H-4398WF35
425μm No. 40 SS H-4278F40 H-4278WF40 H-4398F40 H-4398WF40
355μm No. 45 SS H-4278F45 H-4278WF45 H-4398F45 H-4398WF45
300μm No. 50 SS H-4278F50 H-4278WF50 H-4398F50 H-4398WF50
250μm No. 60 SS H-4278F60 H-4278WF60 H-4398F60 H-4398WF60
212μm No. 70 SS H-4278F70 H-4278WF70 H-4398F70 H-4398WF70
180μm No. 80 SS H-4278F80 H-4278WF80 H-4398F80 H-4398WF80
150μm No. 100 SS H-4278F100 H-4278WF100 H-4398F100 H-4398WF100
125μm No. 120 SS H-4278F120 H-4278WF120 H-4398F120 H-4398WF120
106μm No. 140 SS H-4278F140 H-4278WF140 H-4398F140 H-4398WF140
90μm No. 170 SS H-4278F170 H-4278WF170 H-4398F170 H-4398WF170
75μm No. 200 SS H-4278F200 H-4278WF200 H-4398F200 H-4398WF200
63μm No. 230 SS H-4278F230 H-4278WF230 H-4398F230 H-4398WF230
53μm No. 270 SS H-4278F270 H-4278WF270 H-4398F270 H-4398WF270
45μm No. 325 SS H-4278F325 H-4278WF325 H-4398F325 H-4398WF325 Non-ASTM sizes— .125" and .0125"— are available,
38μm No. 400 SS H-4278F400 H-4278WF400 H-4398F400 H-4398WF400 please inquire.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 45
AGGREGATE Sieves

U.S.A. Standard Sieve Sizes

and Equivalents
U.S.A. Standard Sieve Series
Alternative Nominal Standard
Number Opening (mm) Looking for sieves? Humboldt stocks an extensive
4" 4.000 100mm
offering of sieves for use in all types of sieve testing
3.5" 3.500 90mm
applications, from sampling and classification of soils,
3" 3.000 75mm
2.5" 2.500 63mm aggregates and other powdered and granular materials
2.12" 2.120 53mm to specific ASTM standard tests. Humboldt carries an
2" 2.000 50mm extensive inventory of sieves in all popular sizes and
1.75" 1.750 45mm mesh/frame material configurations. We try to maintain
1.5" 1.500 37.5mm a complete stock of 8" and 12" sieves in both full and
1.25" 1.250 31.5mm
half heights for quick turnaround, as well as keeping a
1.06" 1.060 26.5mm
large inventory of other sieve sizes and frame and mesh
1" 1.000 25.0mm
.875" 0.875 22.4mm configurations.
.75" 0.750 19.0mm Our sieves are of the highest quality to ensure consistent
.625" 0.625 16.0mm fit, accurate specifications and durable construction. All
.530" 0.530 13.2mm our sieves comply with ASTM E11 and AASHTO M92;
.500" 0.500 12.5mm
and, are given individual serial numbers for traceability.
.434" 0.434 11.2mm
Certified sieves are also available as an option, please
.375" 0.375 9.5mm
.312" 0.312 8.0mm inquire.
.265" 0.265 6.7mm Humboldt sieves are available with brass frame and
.25" 0.250 6.3mm mesh, brass frame with stainless steel mesh or stainless
.125" 0.125 3.17mm frame and mesh. Brass sieves are cost efficient while
No. 3-1/2 0.223 5.6mm
stainless sieves tend to last longer and have sag-resistant
No. 4 0.187 4.75mm
No. 5 0.157 4.00mm
mesh. Sieve frames are seamless spun brass or stainless
No. 6 0.131 3.35mm steel with rigid rolled edges and extended bottoms
No. 7 0.110 2.80mm (skirts) to ensure a good fit between frames, pans and
No. 8 0.094 2.36mm separators of the same diameter— ensuring that your
No. 10 0.078 2.00mm set of sieves stacks properly.
No. 12 0.066 1.70mm
All sieves include a permanently attached metal plate
No. 14 0.055 1.40mm
No. 16 0.046 1.18mm that includes the sieve number, micron size and the
No. 18 0.039 1.00mm nominal opening in millimeters and inches. Sieve
No. 20 0.033 850μm covers, bottom pans and separator pans are also in
No. 25 0.027 710μm stock and ready for shipment.
No. 30 0.023 600μm
No. 35 0.019 50μm
No. 40 0.016 425μm
No. 45 0.013 355μm
No. 50 0.011 300μm
No. 60 0.009 250μm
No. 70 0.008 212μm
No. 80 0.007 180μm
No. 100 0.005 150μm
No. 120 0.0049 125μm
No. 140 0.0041 106μm
No. 170 0.0035 90μm
No. 200 0.0029 75μm
No. 230 0.0024 62μm
No. 270 0.0020 53μm
No. 325 0.0017 45μm
No. 400 0.0014 38μm
No. 450 0.0012 32μm
No. 500 0.0009 25μm
No. 635 0.0007 20μm
No. 850 0.0004 10μm
No. 1000 0.00008 2μm

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

46
Sieves AGGREGATE

USA Standard Brass Frame Stainless Frame

ASTM Test Sieves Sieve Stainless Mesh Stainless Mesh
Size Full Height Half Height Full Height Half Height
2" (50mm) 1" (25mm) 2" (50mm) 1" (25mm)
4" (100mm) H-3920CS4.000 H-3910CS4.000 H-3920CSS4.000 H-3910CSS4.000
3-1/2" (90mm) H-3920CS3.500 H-3910CS3.500 H-3920CSS3.500 H-3910CSS3.500
3" (75mm) H-3920CS3.000 H-3910CS3.000 H-3920CSS3.000 H-3910CSS3.000
2-1/2' (63mm) H-3920CS2.500 H-3910CS2.500 H-3920CSS2.500 H-3910CSS2.500
2.12" (53mm) H-3920CS2.120 H-3910CS2.120 H-3920CSS2.120 H-3910CSS2.120
2" (50mm) H-3920CS2.000 H-3910CS2.000 H-3920CSS2.000 H-3910CSS2.000
1-3/4" (45mm) H-3920CS1.750 H-3910CS1.750 H-3920CSS1.750 H-3910CSS1.750
1-1/2" (37.5mm) H-3920CS1.500 H-3910CS1.500 H-3920CSS1.500 H-3910CSS1.500
1-1/4" (31.5mm) H-3920CS1.250 H-3910CS1.250 H-3920CSS1.250 H-3910CSS1.250
1.06" (26.5mm) H-3920CS1.060 H-3910CS1.060 H-3920CSS1.060 H-3910CSS1.060
1" (25.0mm) H-3920CS1.000 H-3910CS1.000 H-3920CSS1.000 H-3910CSS1.000
7/8" (22.4mm) H-3920CS.875 H-3910CS.875 H-3920CSS.875 H-3910CSS.875
3/4" (19.0mm) H-3920CS.750 H-3910CS.750 H-3920CSS.750 H-3910CSS.750
5/8" (16.0mm) H-3920CS.625 H-3910CS.625 H-3920CSS.625 H-3910CSS.625
0.530" (13.2mm) H-3920CS.530 H-3910CS.530 H-3920CSS.530 H-3910CSS.530
1/2" (12.5mm) H-3920CS.500 H-3910CS.500 H-3920CSS.500 H-3910CSS.500
7/16" (11.2mm) H-3920CS.438 H-3910CS.438 H-3920CSS.438 H-3910CSS.438

8"
3/8" (9.5mm) H-3920CS.375 H-3910CS.375 H-3920CSS.375 H-3910CSS.375
5/16" (8.0mm) H-3920CS.312 H-3910CS.312 H-3920CSS.312 H-3910CSS.312
0.265" (6.7mm) H-3920CS.265 H-3910CS.265 H-3920CSS.265 H-3910CSS.265
1/4" (6.3mm) H-3920CS.250 H-3910CS.250 H-3920CSS.250 H-3910CSS.250
1/8" (3.17mm) H-3920CS.125 H-3910CS.125 H-3920CSS.125 H-3910CSS.125
203mm
No. 3-1/2 (5.6mm) H-3920FS3-1/2 H-3910FS3-1/2 H-3920FSS3-1/2 H-3910FSS3-1/2
No. 4 (4.75mm) H-3920FS4 H-3910FS4 H-3920FSS4 H-3910FSS4
No. 5 (4.0mm) H-3920FS5 H-3910FS5 H-3920FSS5 H-3910FSS5
No. 6 (3.35mm) H-3920FS6 H-3910FS6 H-3920FSS6 H-3910FSS6
No. 7 (2.80mm) H-3920FS7 H-3910FS7 H-3920FSS7 H-3910FSS7
No. 8 (2.36mm) H-3920FS8 H-3910FS8 H-3920FSS8 H-3910FSS8
No. 10 (2.00mm) H-3920FS10 H-3910FS10 H-3920FSS10 H-3910FSS10
No. 12 (1.70mm) H-3920FS12 H-3910FS12 H-3920FSS12 H-3910FSS12
No. 14 (1.40mm) H-3920FS14 H-3910FS14 H-3920FSS14 H-3910FSS14
No. 16 (1.18mm) H-3920FS16 H-3910FS16 H-3920FSS16 H-3910FSS16
No. 18 (1.0mm) H-3920FS18 H-3910FS18 H-3920FSS18 H-3910FSS18
No. 20 (850μm) H-3920FS20 H-3910FS20 H-3920FSS20 H-3910FSS20
No. 25 (710μm) H-3920FS25 H-3910FS25 H-3920FSS25 H-3910FSS25
No. 30 (600μm) H-3920FS30 H-3910FS30 H-3920FSS30 H-3910FSS30
No. 35 (500μm) H-3920FS35 H-3910FS35 H-3920FSS35 H-3910FSS35
No. 40 (425μm) H-3920FS40 H-3910FS40 H-3920FSS40 H-3910FSS40
No. 45 (355μm) H-3920FS45 H-3910FS45 H-3920FSS45 H-3910FSS45
No. 50 (300μm) H-3920FS50 H-3910FS50 H-3920FSS50 H-3910FSS50
No. 60 (250μm) H-3920FS60 H-3910FS60 H-3920FSS60 H-3910FSS60
No. 70 (212μm) H-3920FS70 H-3910FS70 H-3920FSS70 H-3910FSS70
No. 80 (180μm) H-3920FS80 H-3910FS80 H-3920FSS80 H-3910FSS80
No. 100 (150μm) H-3920FS100 H-3910FS100 H-3920FSS100 H-3910FSS100
No. 120 (125μm) H-3920FS120 H-3910FS120 H-3920FSS120 H-3910FSS120
No. 140 (106μm) H-3920FS140 H-3910FS140 H-3920FSS140 H-3910FSS140
No. 170 (90μm) H-3920FS170 H-3910FS170 H-3920FSS170 H-3910FSS170
No. 200 (75μm) H-3920FS200 H-3910FS200 H-3920FSS200 H-3910FSS200
No. 230 (63μm) H-3920FS230 H-3910FS230 H-3920FSS230 H-3910FSS230
No. 270 (53μm) H-3920FS270 H-3910FS270 H-3920FSS270 H-3910FSS270
No. 325 (45μm) H-3920FS325 H-3910FS325 H-3920FSS325 H-3910FSS325
No. 400 (38μm) H-3920FS400 H-3910FS400 H-3920FSS400 H-3910FSS400
No. 450 (32μm) H-3920FS450 H-3910FS450 H-3920FSS450 H-3910FSS450
No. 500 (25μm) H-3920FS500 H-3910FS500 H-3920FSS500 H-3910FSS500
No. 635 (20μm) H-3920FS635 H-3910FS635 H-3920FSS635 H-3910FSS635
No. 850 (10μm) H-3920FS850 H-3910FS850 – –
No. 1000 (2μm) H-3920FS1000 H-3910FS1000 – –

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 47
AGGREGATE Sieves

Brass Frame Stainless Frame USA Standard

Sieve Stainless Mesh Stainless Mesh ASTM Test Sieves
Size Full Height Inter. Height Half Height Full Height Half Height
3" (75mm) 2" (50mm) 1.625" (41mm) 3" (75mm) 1.625" (41mm)
4" (100mm) H-3912CS4.000 H-3922CS4.000 H-3932CS4.000 H-3912CSS4.000 H-3932CSS4.000
3-1/2" (90mm) H-3912CS3.500 H-3922CS3.500 H-3932CS3.500 H-3912CSS3.500 H-3932CSS3.500
3" (75mm) H-3912CS3.000 H-3922CS3.000 H-3932CS3.000 H-3912CSS3.000 H-3932CSS3.000
2-1/2' (63mm) H-3912CS2.500 H-3922CS2.500 H-3932CS2.500 H-3912CSS2.500 H-3932CSS2.500
2.12" (53mm) H-3912CS2.120 H-3922CS2.120 H-3932CS2.120 H-3912CSS2.120 H-3932CSS2.120
2" (50mm) H-3912CS2.000 H-3922CS2.000 H-3932CS2.000 H-3912CSS2.000 H-3932CSS2.000
1-3/4" (45mm) H-3912CS1.750 H-3922CS1.750 H-3932CS1.750 H-3912CSS1.750 H-3932CSS1.750
1-1/2" (37.5mm) H-3912CS1.500 H-3922CS1.500 H-3932CS1.500 H-3912CSS1.500 H-3932CSS1.500
1-1/4" (31.5mm) H-3912CS1.250 H-3922CS1.250 H-3932CS1.250 H-3912CSS1.250 H-3932CSS1.250
1.06" (26.5mm) H-3912CS1.060 H-3922CS1.060 H-3932CS1.060 H-3912CSS1.060 H-3932CSS1.060
1" (25.0mm) H-3912CS1.000 H-3922CS1.000 H-3932CS1.000 H-3912CSS1.000 H-3932CSS1.000
7/8" (22.4mm) H-3912CS.875 H-3922CS.875 H-3932CS.875 H-3912CSS.875 H-3932CSS.875
3/4" (19.0mm) H-3912CS.750 H-3922CS.750 H-3932CS.750 H-3912CSS.750 H-3932CSS.750
5/8" (16.0mm) H-3912CS.625 H-3922CS.625 H-3932CS.625 H-3912CSS.625 H-3932CSS.625
0.530" (13.2mm) H-3912CS.530 H-3922CS.530 H-3932CS.530 H-3912CSS.530 H-3932CSS.530
1/2" (12.5mm) H-3912CS.500 H-3922CS.500 H-3932CS.500 H-3912CSS.500 H-3932CSS.500
7/16" (11.2mm) H-3912CS.438 H-3922CS.438 H-3932CS.438 H-3912CSS.438 H-3932CSS.438

12"
3/8" (9.5mm) H-3912CS.375 H-3922CS.375 H-3932CS.375 H-3912CSS.375 H-3932CSS.375
5/16" (8.0mm) H-3912CS.312 H-3922CS.312 H-3932CS.312 H-3912CSS.312 H-3932CSS.312
0.265" (6.7mm) H-3912CS.265 H-3922CS.265 H-3932CS.265 H-3912CSS.265 H-3932CSS.265
1/4" (6.3mm) H-3912CS.250 H-3922CS.250 H-3932CS.250 H-3912CSS.250 H-3932CSS.250
1/8" (3.17mm) H-3912CS.125 H-3922CS.125 H-3932CS.125 – H-3932CSS.125
305mm
No. 3-1/2 (5.6mm) H-3912FS3-1/2 H-3922FS3-1/2 H-3932FS3-1/2 H-3912FSS3-1/2 H-3932FSS3-1/2
No. 4 (4.75mm) H-3912FS4 H-3922FS4 H-3932FS4 H-3912FSS4 H-3932FSS4
No. 5 (4.0mm) H-3912FS5 H-3922FS5 H-3932FS5 H-3912FSS5 H-3932FSS5
No. 6 (3.35mm) H-3912FS6 H-3922FS6 H-3932FS6 H-3912FSS6 H-3932FSS6
No. 7 (2.80mm) H-3912FS7 H-3922FS7 H-3932FS7 H-3912FSS7 H-3932FSS7
No. 8 (2.36mm) H-3912FS8 H-3922FS8 H-3932FS8 H-3912FSS8 H-3932FSS8
No. 10 (2.00mm) H-3912FS10 H-3922FS10 H-3932FS10 H-3912FSS10 H-3932FSS10
No. 12 (1.70mm) H-3912FS12 H-3922FS12 H-3932FS12 H-3912FSS12 H-3932FSS12
No. 14 (1.40mm) H-3912FS14 H-3922FS14 H-3932FS14 H-3912FSS14 H-3932FSS14
No. 16 (1.18mm) H-3912FS16 H-3922FS16 H-3932FS16 H-3912FSS16 H-3932FSS16
No. 18 (1.0mm) H-3912FS18 H-3922FS18 H-3932FS18 H-3912FSS18 H-3932FSS18
No. 20 (850μm) H-3912FS20 H-3922FS20 H-3932FS20 H-3912FSS20 H-3932FSS20
No. 25 (710μm) H-3912FS25 H-3922FS25 H-3932FS25 H-3912FSS25 H-3932FSS25
No. 30 (600μm) H-3912FS30 H-3922FS30 H-3932FS30 H-3912FSS30 H-3932FSS30
No. 35 (500μm) H-3912FS35 H-3922FS35 H-3932FS35 H-3912FSS35 H-3932FSS35
No. 40 (425μm) H-3912FS40 H-3922FS40 H-3932FS40 H-3912FSS40 H-3932FSS40
No. 45 (355μm) H-3912FS45 H-3922FS45 H-3932FS45 H-3912FSS45 H-3932FSS45
No. 50 (300μm) H-3912FS50 H-3922FS50 H-3932FS50 H-3912FSS50 H-3932FSS50
No. 60 (250μm) H-3912FS60 H-3922FS60 H-3932FS60 H-3912FSS60 H-3932FSS60
No. 70 (212μm) H-3912FS70 H-3922FS70 H-3932FS70 H-3912FSS70 H-3932FSS70
No. 80 (180μm) H-3912FS80 H-3922FS80 H-3932FS80 H-3912FSS80 H-3932FSS80
No. 100 (150μm) H-3912FS100 H-3922FS100 H-3932FS100 H-3912FSS100 H-3932FSS100
No. 120 (125μm) H-3912FS120 H-3922FS120 H-3932FS120 H-3912FSS120 H-3932FSS120
No. 140 (106μm) H-3912FS140 H-3922FS140 H-3932FS140 H-3912FSS140 H-3932FSS140
No. 170 (90μm) H-3912FS170 H-3922FS170 H-3932FS170 H-3912FSS170 H-3932FSS170
No. 200 (75μm) H-3912FS200 H-3922FS200 H-3932FS200 H-3912FSS200 H-3932FSS200
No. 230 (63μm) H-3912FS230 H-3922FS230 H-3932FS230 H-3912FSS230 H-3932FSS230
No. 270 (53μm) H-3912FS270 H-3922FS270 H-3932FS270 H-3912FSS270 H-3932FSS270
No. 325 (45μm) H-3912FS325 H-3922FS325 H-3932FS325 H-3912FSS325 H-3932FSS325
No. 400 (38μm) H-3912FS400 H-3922FS400 H-3932FS400 H-3912FSS400 H-3932FSS400
No. 450 (32μm) H-3912FS450 H-3922FS450 H-3932FS450 H-3912FSS450 H-3932FSS450
No. 500 (25μm) H-3912FS500 H-3922FS500 H-3932FS500 H-3912FSS500 H-3932FSS500
No. 635 (20μm) H-3912FS635 H-3922FS635 H-3932FS635 H-3912FSS635 H-3932FSS635
No. 850 (10μm) H-3912FS850 H-3922FS850 H-3932FS850 – –
No. 1000 (2μm) H-3912FS1000 H-3922FS1000 H-3932FS1000 – –

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

48
Inspection Test Sieves AGGREGATE
USA Standard Brass Frame Stainless Frame
ASTM Inspection Test Sieves Sieve Stainless Mesh Stainless Mesh
Size Full Height Half Height Full Height Half Height
Inspection Test Sieves are used when accuracy and repeatability 2" (50mm) 1" (25mm) 2" (50mm) 1" (25mm)
are paramount. Inspection Test Sieves start with our Standard 4" (100mm) HI-3920CS4.000 HI-3910CS4.000 HI-3920CSS4.000 HI-3910CSS4.000
ASTM Sieves and include an added Inspection level verification. 3-1/2" (90mm) HI-3920CS3.500 HI-3910CS3.500 HI-3920CSS3.500 HI-3910CSS3.500
This verification specifies the number of openings in each sieve 3" (75mm) HI-3920CS3.000 HI-3910CS3.000 HI-3920CSS3.000 HI-3910CSS3.000
after the cloth has been mounted to the frame. Inspection Test 2-1/2' (63mm) HI-3920CS2.500 HI-3910CS2.500 HI-3920CSS2.500 HI-3910CSS2.500
Sieves provides a 99% level of confidence that the standard 2.12" (53mm) HI-3920CS2.120 HI-3910CS2.120 HI-3920CSS2.120 HI-3910CSS2.120
deviation of these openings is within the maximum allowed by 2" (50mm) HI-3920CS2.000 HI-3910CS2.000 HI-3920CSS2.000 HI-3910CSS2.000
ASTM. An Inspection verification is provided with each sieve. 1-3/4" (45mm) HI-3920CS1.750 HI-3910CS1.750 HI-3920CSS1.750 HI-3910CSS1.750
1-1/2" (37.5mm) HI-3920CS1.500 HI-3910CS1.500 HI-3920CSS1.500 HI-3910CSS1.500
1-1/4" (31.5mm) HI-3920CS1.250 HI-3910CS1.250 HI-3920CSS1.250 HI-3910CSS1.250
1.06" (26.5mm) HI-3920CS1.060 HI-3910CS1.060 HI-3920CSS1.060 HI-3910CSS1.060
1" (25.0mm) HI-3920CS1.000 HI-3910CS1.000 HI-3920CSS1.000 HI-3910CSS1.000
7/8" (22.4mm) HI-3920CS.875 HI-3910CS.875 HI-3920CSS.875 HI-3910CSS.875
3/4" (19.0mm) HI-3920CS.750 HI-3910CS.750 HI-3920CSS.750 HI-3910CSS.750
5/8" (16.0mm) HI-3920CS.625 HI-3910CS.625 HI-3920CSS.625 HI-3910CSS.625
0.530" (13.2mm) HI-3920CS.530 HI-3910CS.530 HI-3920CSS.530 HI-3910CSS.530
1/2" (12.5mm) HI-3920CS.500 HI-3910CS.500 HI-3920CSS.500 HI-3910CSS.500
7/16" (11.2mm) HI-3920CS.438 HI-3910CS.438 HI-3920CSS.438 HI-3910CSS.438

8"
3/8" (9.5mm) HI-3920CS.375 HI-3910CS.375 HI-3920CSS.375 HI-3910CSS.375
5/16" (8.0mm) HI-3920CS.312 HI-3910CS.312 HI-3920CSS.312 HI-3910CSS.312
0.265" (6.7mm) HI-3920CS.265 HI-3910CS.265 HI-3920CSS.265 HI-3910CSS.265
1/4" (6.3mm) HI-3920CS.250 HI-3910CS.250 HI-3920CSS.250 HI-3910CSS.250
1/8" (3.17mm) HI-3920CS.125 HI-3910CS.125 HI-3920CSS.125 HI-3910CSS.125
203mm
No. 3-1/2 (5.6mm) HI-3920FS3-1/2 HI-3910FS3-1/2 HI-3920FSS3-1/2 HI-3910FSS3-1/2
No. 4 (4.75mm) HI-3920FS4 HI-3910FS4 HI-3920FSS4 HI-3910FSS4
No. 5 (4.0mm) HI-3920FS5 HI-3910FS5 HI-3920FSS5 HI-3910FSS5
No. 6 (3.35mm) HI-3920FS6 HI-3910FS6 HI-3920FSS6 HI-3910FSS6
No. 7 (2.80mm) HI-3920FS7 HI-3910FS7 HI-3920FSS7 HI-3910FSS7
No. 8 (2.36mm) HI-3920FS8 HI-3910FS8 HI-3920FSS8 HI-3910FSS8
No. 10 (2.00mm) HI-3920FS10 HI-3910FS10 HI-3920FSS10 HI-3910FSS10
No. 12 (1.70mm) HI-3920FS12 HI-3910FS12 HI-3920FSS12 HI-3910FSS12
No. 14 (1.40mm) HI-3920FS14 HI-3910FS14 HI-3920FSS14 HI-3910FSS14
No. 16 (1.18mm) HI-3920FS16 HI-3910FS16 HI-3920FSS16 HI-3910FSS16
No. 18 (1.0mm) HI-3920FS18 HI-3910FS18 HI-3920FSS18 HI-3910FSS18
No. 20 (850μm) HI-3920FS20 HI-3910FS20 HI-3920FSS20 HI-3910FSS20
No. 25 (710μm) HI-3920FS25 HI-3910FS25 HI-3920FSS25 HI-3910FSS25
No. 30 (600μm) HI-3920FS30 HI-3910FS30 HI-3920FSS30 HI-3910FSS30
No. 35 (500μm) HI-3920FS35 HI-3910FS35 HI-3920FSS35 HI-3910FSS35
No. 40 (425μm) HI-3920FS40 HI-3910FS40 HI-3920FSS40 HI-3910FSS40
No. 45 (355μm) HI-3920FS45 HI-3910FS45 HI-3920FSS45 HI-3910FSS45
No. 50 (300μm) HI-3920FS50 HI-3910FS50 HI-3920FSS50 HI-3910FSS50
No. 60 (250μm) HI-3920FS60 HI-3910FS60 HI-3920FSS60 HI-3910FSS60
No. 70 (212μm) HI-3920FS70 HI-3910FS70 HI-3920FSS70 HI-3910FSS70
No. 80 (180μm) HI-3920FS80 HI-3910FS80 HI-3920FSS80 HI-3910FSS80
No. 100 (150μm) HI-3920FS100 HI-3910FS100 HI-3920FSS100 HI-3910FSS100
No. 120 (125μm) HI-3920FS120 HI-3910FS120 HI-3920FSS120 HI-3910FSS120
No. 140 (106μm) HI-3920FS140 HI-3910FS140 HI-3920FSS140 HI-3910FSS140
No. 170 (90μm) HI-3920FS170 HI-3910FS170 HI-3920FSS170 HI-3910FSS170
No. 200 (75μm) HI-3920FS200 HI-3910FS200 HI-3920FSS200 HI-3910FSS200
No. 230 (63μm) HI-3920FS230 HI-3910FS230 HI-3920FSS230 HI-3910FSS230
No. 270 (53μm) HI-3920FS270 HI-3910FS270 HI-3920FSS270 HI-3910FSS270
No. 325 (45μm) HI-3920FS325 HI-3910FS325 HI-3920FSS325 HI-3910FSS325
No. 400 (38μm) HI-3920FS400 HI-3910FS400 HI-3920FSS400 HI-3910FSS400
No. 450 (32μm) HI-3920FS450 HI-3910FS450 HI-3920FSS450 HI-3910FSS450
No. 500 (25μm) HI-3920FS500 HI-3910FS500 HI-3920FSS500 HI-3910FSS500
No. 635 (20μm) HI-3920FS635 HI-3910FS635 HI-3920FSS635 HI-3910FSS635
No. 850 (10μm) HI-3920FS850 HI-3910FS850 – –
No. 1000 (2μm) HI-3920FS1000 HI-3910FS1000 – –

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 49
AGGREGATE Inspection Test Sieves

Brass Frame Stainless Frame USA Standard

Sieve Stainless Mesh Stainless Mesh ASTM Inspection Test Sieves
Size Full Height Inter. Height Half Height Full Height Half Height
3" (75mm) 2" (50mm) 1.625" (41mm) 3" (75mm) 1.625" (41mm) Inspection Test Sieves are used when accuracy
4" (100mm) HI-3912CS4.000 HI-3922CS4.000 HI-3932CS4.000 HI-3912CSS4.000 HI-3932CSS4.000 and repeatability are paramount. Inspection
3-1/2" (90mm) HI-3912CS3.500 HI-3922CS3.500 HI-3932CS3.500 HI-3912CSS3.500 HI-3932CSS3.500 Test Sieves start with our Standard ASTM
3" (75mm) HI-3912CS3.000 HI-3922CS3.000 HI-3932CS3.000 HI-3912CSS3.000 HI-3932CSS3.000 Sieves and include an added Inspection
2-1/2' (63mm) HI-3912CS2.500 HI-3922CS2.500 HI-3932CS2.500 HI-3912CSS2.500 HI-3932CSS2.500 level verification. This verification specifies
2.12" (53mm) HI-3912CS2.120 HI-3922CS2.120 HI-3932CS2.120 HI-3912CSS2.120 HI-3932CSS2.120 the number of openings in each sieve after
2" (50mm) HI-3912CS2.000 HI-3922CS2.000 HI-3932CS2.000 HI-3912CSS2.000 HI-3932CSS2.000 the cloth has been mounted to the frame.
1-3/4" (45mm) HI-3912CS1.750 HI-3922CS1.750 HI-3932CS1.750 HI-3912CSS1.750 HI-3932CSS1.750 Inspection Test Sieves provides a 99% level
1-1/2" (37.5mm) HI-3912CS1.500 HI-3922CS1.500 HI-3932CS1.500 HI-3912CSS1.500 HI-3932CSS1.500 of confidence that the standard deviation
1-1/4" (31.5mm) HI-3912CS1.250 HI-3922CS1.250 HI-3932CS1.250 HI-3912CSS1.250 HI-3932CSS1.250 of these openings is within the maximum
1.06" (26.5mm) HI-3912CS1.060 HI-3922CS1.060 HI-3932CS1.060 HI-3912CSS1.060 HI-3932CSS1.060 allowed by ASTM. An Inspection verification
1" (25.0mm) HI-3912CS1.000 HI-3922CS1.000 HI-3932CS1.000 HI-3912CSS1.000 HI-3932CSS1.000 is provided with each sieve.
7/8" (22.4mm) HI-3912CS.875 HI-3922CS.875 HI-3932CS.875 HI-3912CSS.875 HI-3932CSS.875
3/4" (19.0mm) HI-3912CS.750 HI-3922CS.750 HI-3932CS.750 HI-3912CSS.750 HI-3932CSS.750
5/8" (16.0mm) HI-3912CS.625 HI-3922CS.625 HI-3932CS.625 HI-3912CSS.625 HI-3932CSS.625
0.530" (13.2mm) HI-3912CS.530 HI-3922CS.530 HI-3932CS.530 HI-3912CSS.530 HI-3932CSS.530
1/2" (12.5mm) HI-3912CS.500 HI-3922CS.500 HI-3932CS.500 HI-3912CSS.500 HI-3932CSS.500
7/16" (11.2mm) HI-3912CS.438 HI-3922CS.438 HI-3932CS.438 HI-3912CSS.438 HI-3932CSS.438

12"
3/8" (9.5mm) HI-3912CS.375 HI-3922CS.375 HI-3932CS.375 HI-3912CSS.375 HI-3932CSS.375
5/16" (8.0mm) HI-3912CS.312 HI-3922CS.312 HI-3932CS.312 HI-3912CSS.312 HI-3932CSS.312
0.265" (6.7mm) HI-3912CS.265 HI-3922CS.265 HI-3932CS.265 HI-3912CSS.265 HI-3932CSS.265
1/4" (6.3mm) HI-3912CS.250 HI-3922CS.250 HI-3932CS.250 HI-3912CSS.250 HI-3932CSS.250
1/8" (3.17mm) HI-3912CS.125 HI-3922CS.125 HI-3932CS.125 – HI-3932CSS.125
305mm
No. 3-1/2 (5.6mm) HI-3912FS3-1/2 HI-3922FS3-1/2 HI-3932FS3-1/2 HI-3912FSS3-1/2 HI-3932FSS3-1/2
No. 4 (4.75mm) HI-3912FS4 HI-3922FS4 HI-3932FS4 HI-3912FSS4 HI-3932FSS4
No. 5 (4.0mm) HI-3912FS5 HI-3922FS5 HI-3932FS5 HI-3912FSS5 HI-3932FSS5
No. 6 (3.35mm) HI-3912FS6 HI-3922FS6 HI-3932FS6 HI-3912FSS6 HI-3932FSS6
No. 7 (2.80mm) HI-3912FS7 HI-3922FS7 HI-3932FS7 HI-3912FSS7 HI-3932FSS7
No. 8 (2.36mm) HI-3912FS8 HI-3922FS8 HI-3932FS8 HI-3912FSS8 HI-3932FSS8
No. 10 (2.00mm) HI-3912FS10 HI-3922FS10 HI-3932FS10 HI-3912FSS10 HI-3932FSS10
No. 12 (1.70mm) HI-3912FS12 HI-3922FS12 HI-3932FS12 HI-3912FSS12 HI-3932FSS12
No. 14 (1.40mm) HI-3912FS14 HI-3922FS14 HI-3932FS14 HI-3912FSS14 HI-3932FSS14
No. 16 (1.18mm) HI-3912FS16 HI-3922FS16 HI-3932FS16 HI-3912FSS16 HI-3932FSS16
No. 18 (1.0mm) HI-3912FS18 HI-3922FS18 HI-3932FS18 HI-3912FSS18 HI-3932FSS18
No. 20 (850μm) HI-3912FS20 HI-3922FS20 HI-3932FS20 HI-3912FSS20 HI-3932FSS20
No. 25 (710μm) HI-3912FS25 HI-3922FS25 HI-3932FS25 HI-3912FSS25 HI-3932FSS25
No. 30 (600μm) HI-3912FS30 HI-3922FS30 HI-3932FS30 HI-3912FSS30 HI-3932FSS30
No. 35 (500μm) HI-3912FS35 HI-3922FS35 HI-3932FS35 HI-3912FSS35 HI-3932FSS35
No. 40 (425μm) HI-3912FS40 HI-3922FS40 HI-3932FS40 HI-3912FSS40 HI-3932FSS40
No. 45 (355μm) HI-3912FS45 HI-3922FS45 HI-3932FS45 HI-3912FSS45 HI-3932FSS45
No. 50 (300μm) HI-3912FS50 HI-3922FS50 HI-3932FS50 HI-3912FSS50 HI-3932FSS50
No. 60 (250μm) HI-3912FS60 HI-3922FS60 HI-3932FS60 HI-3912FSS60 HI-3932FSS60
No. 70 (212μm) HI-3912FS70 HI-3922FS70 HI-3932FS70 HI-3912FSS70 HI-3932FSS70
No. 80 (180μm) HI-3912FS80 HI-3922FS80 HI-3932FS80 HI-3912FSS80 HI-3932FSS80
No. 100 (150μm) HI-3912FS100 HI-3922FS100 HI-3932FS100 HI-3912FSS100 HI-3932FSS100
No. 120 (125μm) HI-3912FS120 HI-3922FS120 HI-3932FS120 HI-3912FSS120 HI-3932FSS120
No. 140 (106μm) HI-3912FS140 HI-3922FS140 HI-3932FS140 HI-3912FSS140 HI-3932FSS140
No. 170 (90μm) HI-3912FS170 HI-3922FS170 HI-3932FS170 HI-3912FSS170 HI-3932FSS170
No. 200 (75μm) HI-3912FS200 HI-3922FS200 HI-3932FS200 HI-3912FSS200 HI-3932FSS200
No. 230 (63μm) HI-3912FS230 HI-3922FS230 HI-3932FS230 HI-3912FSS230 HI-3932FSS230
No. 270 (53μm) HI-3912FS270 HI-3922FS270 HI-3932FS270 HI-3912FSS270 HI-3932FSS270
No. 325 (45μm) HI-3912FS325 HI-3922FS325 HI-3932FS325 HI-3912FSS325 HI-3932FSS325
No. 400 (38μm) HI-3912FS400 HI-3922FS400 HI-3932FS400 HI-3912FSS400 HI-3932FSS400
No. 450 (32μm) HI-3912FS450 HI-3922FS450 HI-3932FS450 HI-3912FSS450 HI-3932FSS450
No. 500 (25μm) HI-3912FS500 HI-3922FS500 HI-3932FS500 HI-3912FSS500 HI-3932FSS500
No. 635 (20μm) HI-3912FS635 HI-3922FS635 HI-3932FS635 HI-3912FSS635 HI-3932FSS635
No. 850 (10μm) HI-3912FS850 HI-3922FS850 HI-3932FS850 – –
No. 1000 (2μm) HI-3912FS1000 HI-3922FS1000 HI-3932FS1000 – –

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

50
Calibration Test Sieves AGGREGATE
USA Standard Brass Frame Stainless Frame
ASTM Calibration Test Sieves Sieve Stainless Mesh Stainless Mesh
Size Full Height Half Height Full Height Half Height
Calibration Test Sieves are used when the application 2" (50mm) 1" (25mm) 2" (50mm) 1" (25mm)
demands the highest accuracy and repeatability 4" (100mm) HC-3920CS4.000 HC-3910CS4.000 HC-3920CSS4.000 HC-3910CSS4.000
available. Calibration Test Sieves start with our Standard 3-1/2" (90mm) HC-3920CS3.500 HC-3910CS3.500 HC-3920CSS3.500 HC-3910CSS3.500
ASTM Sieves and include an added calibration level 3" (75mm) HC-3920CS3.000 HC-3910CS3.000 HC-3920CSS3.000 HC-3910CSS3.000
verification. This verification measures about twice as 2-1/2' (63mm) HC-3920CS2.500 HC-3910CS2.500 HC-3920CSS2.500 HC-3910CSS2.500
many openings in the sieve as is done for an Inspection 2.12" (53mm) HC-3920CS2.120 HC-3910CS2.120 HC-3920CSS2.120 HC-3910CSS2.120
Sieve. Calibration Test Sieves provide a 99.73% level of 2" (50mm) HC-3920CS2.000 HC-3910CS2.000 HC-3920CSS2.000 HC-3910CSS2.000
confidence that the standard deviation of these openings 1-3/4" (45mm) HC-3920CS1.750 HC-3910CS1.750 HC-3920CSS1.750 HC-3910CSS1.750
is within the maximum allowed by ASTM. A Calibration 1-1/2" (37.5mm) HC-3920CS1.500 HC-3910CS1.500 HC-3920CSS1.500 HC-3910CSS1.500
verification is provided with each sieve. 1-1/4" (31.5mm) HC-3920CS1.250 HC-3910CS1.250 HC-3920CSS1.250 HC-3910CSS1.250
1.06" (26.5mm) HC-3920CS1.060 HC-3910CS1.060 HC-3920CSS1.060 HC-3910CSS1.060
1" (25.0mm) HC-3920CS1.000 HC-3910CS1.000 HC-3920CSS1.000 HC-3910CSS1.000
7/8" (22.4mm) HC-3920CS.875 HC-3910CS.875 HC-3920CSS.875 HC-3910CSS.875
3/4" (19.0mm) HC-3920CS.750 HC-3910CS.750 HC-3920CSS.750 HC-3910CSS.750
5/8" (16.0mm) HC-3920CS.625 HC-3910CS.625 HC-3920CSS.625 HC-3910CSS.625
0.530" (13.2mm) HC-3920CS.530 HC-3910CS.530 HC-3920CSS.530 HC-3910CSS.530
1/2" (12.5mm) HC-3920CS.500 HC-3910CS.500 HC-3920CSS.500 HC-3910CSS.500
7/16" (11.2mm) HC-3920CS.438 HC-3910CS.438 HC-3920CSS.438 HC-3910CSS.438

8"
3/8" (9.5mm) HC-3920CS.375 HC-3910CS.375 HC-3920CSS.375 HC-3910CSS.375
5/16" (8.0mm) HC-3920CS.312 HC-3910CS.312 HC-3920CSS.312 HC-3910CSS.312
0.265" (6.7mm) HC-3920CS.265 HC-3910CS.265 HC-3920CSS.265 HC-3910CSS.265
1/4" (6.3mm) HC-3920CS.250 HC-3910CS.250 HC-3920CSS.250 HC-3910CSS.250
1/8" (3.17mm) HC-3920CS.125 HC-3910CS.125 HC-3920CSS.125 HC-3910CSS.125
203mm
No. 3-1/2 (5.6mm) HC-3920FS3-1/2 HC-3910FS3-1/2 HC-3920FSS3-1/2 HC-3910FSS3-1/2
No. 4 (4.75mm) HC-3920FS4 HC-3910FS4 HC-3920FSS4 HC-3910FSS4
No. 5 (4.0mm) HC-3920FS5 HC-3910FS5 HC-3920FSS5 HC-3910FSS5
No. 6 (3.35mm) HC-3920FS6 HC-3910FS6 HC-3920FSS6 HC-3910FSS6
No. 7 (2.80mm) HC-3920FS7 HC-3910FS7 HC-3920FSS7 HC-3910FSS7
No. 8 (2.36mm) HC-3920FS8 HC-3910FS8 HC-3920FSS8 HC-3910FSS8
No. 10 (2.00mm) HC-3920FS10 HC-3910FS10 HC-3920FSS10 HC-3910FSS10
No. 12 (1.70mm) HC-3920FS12 HC-3910FS12 HC-3920FSS12 HC-3910FSS12
No. 14 (1.40mm) HC-3920FS14 HC-3910FS14 HC-3920FSS14 HC-3910FSS14
No. 16 (1.18mm) HC-3920FS16 HC-3910FS16 HC-3920FSS16 HC-3910FSS16
No. 18 (1.0mm) HC-3920FS18 HC-3910FS18 HC-3920FSS18 HC-3910FSS18
No. 20 (850μm) HC-3920FS20 HC-3910FS20 HC-3920FSS20 HC-3910FSS20
No. 25 (710μm) HC-3920FS25 HC-3910FS25 HC-3920FSS25 HC-3910FSS25
No. 30 (600μm) HC-3920FS30 HC-3910FS30 HC-3920FSS30 HC-3910FSS30
No. 35 (500μm) HC-3920FS35 HC-3910FS35 HC-3920FSS35 HC-3910FSS35
No. 40 (425μm) HC-3920FS40 HC-3910FS40 HC-3920FSS40 HC-3910FSS40
No. 45 (355μm) HC-3920FS45 HC-3910FS45 HC-3920FSS45 HC-3910FSS45
No. 50 (300μm) HC-3920FS50 HC-3910FS50 HC-3920FSS50 HC-3910FSS50
No. 60 (250μm) HC-3920FS60 HC-3910FS60 HC-3920FSS60 HC-3910FSS60
No. 70 (212μm) HC-3920FS70 HC-3910FS70 HC-3920FSS70 HC-3910FSS70
No. 80 (180μm) HC-3920FS80 HC-3910FS80 HC-3920FSS80 HC-3910FSS80
No. 100 (150μm) HC-3920FS100 HC-3910FS100 HC-3920FSS100 HC-3910FSS100
No. 120 (125μm) HC-3920FS120 HC-3910FS120 HC-3920FSS120 HC-3910FSS120
No. 140 (106μm) HC-3920FS140 HC-3910FS140 HC-3920FSS140 HC-3910FSS140
No. 170 (90μm) HC-3920FS170 HC-3910FS170 HC-3920FSS170 HC-3910FSS170
No. 200 (75μm) HC-3920FS200 HC-3910FS200 HC-3920FSS200 HC-3910FSS200
No. 230 (63μm) HC-3920FS230 HC-3910FS230 HC-3920FSS230 HC-3910FSS230
No. 270 (53μm) HC-3920FS270 HC-3910FS270 HC-3920FSS270 HC-3910FSS270
No. 325 (45μm) HC-3920FS325 HC-3910FS325 HC-3920FSS325 HC-3910FSS325
No. 400 (38μm) HC-3920FS400 HC-3910FS400 HC-3920FSS400 HC-3910FSS400
No. 450 (32μm) HC-3920FS450 HC-3910FS450 HC-3920FSS450 HC-3910FSS450
No. 500 (25μm) HC-3920FS500 HC-3910FS500 HC-3920FSS500 HC-3910FSS500
No. 635 (20μm) HC-3920FS635 HC-3910FS635 HC-3920FSS635 HC-3910FSS635
No. 850 (10μm) HC-3920FS850 HC-3910FS850 – –
No. 1000 (2μm) HC-3920FS1000 HC-3910FS1000 – –

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 51
AGGREGATE Calibration Test Sieves

Brass Frame Stainless Frame USA Standard

Sieve Stainless Mesh Stainless Mesh ASTM Calibration Test Sieves
Size Full Height Inter. Height Half Height Full Height Half Height
3" (75mm) 2" (50mm) 1.625" (41mm) 3" (75mm) 1.625" (41mm)
Calibration Test Sieves are used when
4" (100mm) HC-3912CS4.000 HC-3922CS4.000 HC-3932CS4.000 HC-3912CSS4.000 HC-3932CSS4.000
the application demands the highest
3-1/2" (90mm) HC-3912CS3.500 HC-3922CS3.500 HC-3932CS3.500 HC-3912CSS3.500 HC-3932CSS3.500
accuracy and repeatability available.
3" (75mm) HC-3912CS3.000 HC-3922CS3.000 HC-3932CS3.000 HC-3912CSS3.000 HC-3932CSS3.000
Calibration Test Sieves start with our
2-1/2' (63mm) HC-3912CS2.500 HC-3922CS2.500 HC-3932CS2.500 HC-3912CSS2.500 HC-3932CSS2.500
Standard ASTM Sieves and include an
2.12" (53mm) HC-3912CS2.120 HC-3922CS2.120 HC-3932CS2.120 HC-3912CSS2.120 HC-3932CSS2.120
added calibration level verification. This
2" (50mm) HC-3912CS2.000 HC-3922CS2.000 HC-3932CS2.000 HC-3912CSS2.000 HC-3932CSS2.000
verification measures about twice as many
1-3/4" (45mm) HC-3912CS1.750 HC-3922CS1.750 HC-3932CS1.750 HC-3912CSS1.750 HC-3932CSS1.750
openings in the sieve as is done for an
1-1/2" (37.5mm) HC-3912CS1.500 HC-3922CS1.500 HC-3932CS1.500 HC-3912CSS1.500 HC-3932CSS1.500
Inspection Sieve. Calibration Test Sieves
1-1/4" (31.5mm) HC-3912CS1.250 HC-3922CS1.250 HC-3932CS1.250 HC-3912CSS1.250 HC-3932CSS1.250
1.06" (26.5mm) HC-3912CS1.060 HC-3922CS1.060 HC-3932CS1.060 HC-3912CSS1.060 HC-3932CSS1.060
provide a 99.73% level of confidence that
1" (25.0mm) HC-3912CS1.000 HC-3922CS1.000 HC-3932CS1.000 HC-3912CSS1.000 HC-3932CSS1.000
the standard deviation of these openings
7/8" (22.4mm) HC-3912CS.875 HC-3922CS.875 HC-3932CS.875 HC-3912CSS.875 HC-3932CSS.875
is within the maximum allowed by ASTM.
3/4" (19.0mm) HC-3912CS.750 HC-3922CS.750 HC-3932CS.750 HC-3912CSS.750 HC-3932CSS.750
A Calibration verification is provided with
5/8" (16.0mm) HC-3912CS.625 HC-3922CS.625 HC-3932CS.625 HC-3912CSS.625 HC-3932CSS.625
each sieve.
0.530" (13.2mm) HC-3912CS.530 HC-3922CS.530 HC-3932CS.530 HC-3912CSS.530 HC-3932CSS.530
1/2" (12.5mm) HC-3912CS.500 HC-3922CS.500 HC-3932CS.500 HC-3912CSS.500 HC-3932CSS.500
7/16" (11.2mm) HC-3912CS.438 HC-3922CS.438 HC-3932CS.438 HC-3912CSS.438 HC-3932CSS.438

12"
3/8" (9.5mm) HC-3912CS.375 HC-3922CS.375 HC-3932CS.375 HC-3912CSS.375 HC-3932CSS.375
5/16" (8.0mm) HC-3912CS.312 HC-3922CS.312 HC-3932CS.312 HC-3912CSS.312 HC-3932CSS.312
0.265" (6.7mm) HC-3912CS.265 HC-3922CS.265 HC-3932CS.265 HC-3912CSS.265 HC-3932CSS.265
1/4" (6.3mm) HC-3912CS.250 HC-3922CS.250 HC-3932CS.250 HC-3912CSS.250 HC-3932CSS.250
1/8" (3.17mm) HC-3912CS.125 HC-3922CS.125 HC-3932CS.125 – HC-3932CSS.125
305mm
No. 3-1/2 (5.6mm) HC-3912FS3-1/2 HC-3922FS3-1/2 HC-3932FS3-1/2 HC-3912FSS3-1/2 HC-3932FSS3-1/2
No. 4 (4.75mm) HC-3912FS4 HC-3922FS4 HC-3932FS4 HC-3912FSS4 HC-3932FSS4
No. 5 (4.0mm) HC-3912FS5 HC-3922FS5 HC-3932FS5 HC-3912FSS5 HC-3932FSS5
No. 6 (3.35mm) HC-3912FS6 HC-3922FS6 HC-3932FS6 HC-3912FSS6 HC-3932FSS6
No. 7 (2.80mm) HC-3912FS7 HC-3922FS7 HC-3932FS7 HC-3912FSS7 HC-3932FSS7
No. 8 (2.36mm) HC-3912FS8 HC-3922FS8 HC-3932FS8 HC-3912FSS8 HC-3932FSS8
No. 10 (2.00mm) HC-3912FS10 HC-3922FS10 HC-3932FS10 HC-3912FSS10 HC-3932FSS10
No. 12 (1.70mm) HC-3912FS12 HC-3922FS12 HC-3932FS12 HC-3912FSS12 HC-3932FSS12
No. 14 (1.40mm) HC-3912FS14 HC-3922FS14 HC-3932FS14 HC-3912FSS14 HC-3932FSS14
No. 16 (1.18mm) HC-3912FS16 HC-3922FS16 HC-3932FS16 HC-3912FSS16 HC-3932FSS16
No. 18 (1.0mm) HC-3912FS18 HC-3922FS18 HC-3932FS18 HC-3912FSS18 HC-3932FSS18
No. 20 (850μm) HC-3912FS20 HC-3922FS20 HC-3932FS20 HC-3912FSS20 HC-3932FSS20
No. 25 (710μm) HC-3912FS25 HC-3922FS25 HC-3932FS25 HC-3912FSS25 HC-3932FSS25
No. 30 (600μm) HC-3912FS30 HC-3922FS30 HC-3932FS30 HC-3912FSS30 HC-3932FSS30
No. 35 (500μm) HC-3912FS35 HC-3922FS35 HC-3932FS35 HC-3912FSS35 HC-3932FSS35
No. 40 (425μm) HC-3912FS40 HC-3922FS40 HC-3932FS40 HC-3912FSS40 HC-3932FSS40
No. 45 (355μm) HC-3912FS45 HC-3922FS45 HC-3932FS45 HC-3912FSS45 HC-3932FSS45
No. 50 (300μm) HC-3912FS50 HC-3922FS50 HC-3932FS50 HC-3912FSS50 HC-3932FSS50
No. 60 (250μm) HC-3912FS60 HC-3922FS60 HC-3932FS60 HC-3912FSS60 HC-3932FSS60
No. 70 (212μm) HC-3912FS70 HC-3922FS70 HC-3932FS70 HC-3912FSS70 HC-3932FSS70
No. 80 (180μm) HC-3912FS80 HC-3922FS80 HC-3932FS80 HC-3912FSS80 HC-3932FSS80
No. 100 (150μm) HC-3912FS100 HC-3922FS100 HC-3932FS100 HC-3912FSS100 HC-3932FSS100
No. 120 (125μm) HC-3912FS120 HC-3922FS120 HC-3932FS120 HC-3912FSS120 HC-3932FSS120
No. 140 (106μm) HC-3912FS140 HC-3922FS140 HC-3932FS140 HC-3912FSS140 HC-3932FSS140
No. 170 (90μm) HC-3912FS170 HC-3922FS170 HC-3932FS170 HC-3912FSS170 HC-3932FSS170
No. 200 (75μm) HC-3912FS200 HC-3922FS200 HC-3932FS200 HC-3912FSS200 HC-3932FSS200
No. 230 (63μm) HC-3912FS230 HC-3922FS230 HC-3932FS230 HC-3912FSS230 HC-3932FSS230
No. 270 (53μm) HC-3912FS270 HC-3922FS270 HC-3932FS270 HC-3912FSS270 HC-3932FSS270
No. 325 (45μm) HC-3912FS325 HC-3922FS325 HC-3932FS325 HC-3912FSS325 HC-3932FSS325
No. 400 (38μm) HC-3912FS400 HC-3922FS400 HC-3932FS400 HC-3912FSS400 HC-3932FSS400
No. 450 (32μm) HC-3912FS450 HC-3922FS450 HC-3932FS450 HC-3912FSS450 HC-3932FSS450
No. 500 (25μm) HC-3912FS500 HC-3922FS500 HC-3932FS500 HC-3912FSS500 HC-3932FSS500
No. 635 (20μm) HC-3912FS635 HC-3922FS635 HC-3932FS635 HC-3912FSS635 HC-3932FSS635
No. 850 (10μm) HC-3912FS850 HC-3922FS850 HC-3932FS850 – –
No. 1000 (2μm) HC-3912FS1000 HC-3922FS1000 HC-3932FS1000 – –

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

52
Sieves AGGREGATE
Deep, USA Standard 4" Diameter 12" Diameter
ASTM Test Sieves Sieve
Size Brass Frame, Stainless Mesh Brass Frame, Stainless Mesh
1.5" Deep 4" Deep 4" Deep 8" Deep
4" (100mm) - - H-3928CS4.000 H-3938CS4.000
3-1/2" (90mm) - - H-3928CS3.500 H-3938CS3.500
3" (75mm) - - H-3928CS3.000 H-3938CS3.000
2-1/2' (63mm) - - H-3928CS2.500 H-3938CS2.500
2.12" (53mm) - - H-3928CS2.120 H-3938CS2.120
2" (50mm) - - H-3928CS2.000 H-3938CS2.000
1-3/4" (45mm) - - H-3928CS1.750 H-3938CS1.750
1-1/2" (37.5mm) - - H-3928CS1.500 H-3938CS1.500
1-1/4" (31.5mm) - - H-3928CS1.250 H-3938CS1.250
1.06" (26.5mm) - - H-3928CS1.060 H-3938CS1.060
1" (25.0mm) H-3914CS1.000 H-3924CS1.000 H-3928CS1.000 H-3938CS1.000
7/8" (22.4mm) H-3914CS.875 H-3924CS.875 H-3928CS.875 H-3938CS.875
3/4" (19.0mm) H-3914CS.750 H-3924CS.750 H-3928CS.750 H-3910CS.750
5/8" (16.0mm) H-3914CS.625 H-3924CS.625 H-3928CS.625 H-3938CS.625
0.530" (13.2mm) H-3914CS.530 H-3924CS.530 H-3928CS.530 H-3938CS.530
1/2" (12.5mm) H-3914CS.500 H-3924CS.500 H-3928CS.500 H-3938CS.500
7/16" (11.2mm) H-3914CS.438 H-3924CS.438 H-3928CS.438 H-3938CS.438
3/8" (9.5mm) H-3914CS.375 H-3924CS.375 H-3928CS.375 H-3938CS.375

4" 12"
5/16" (8.0mm) H-3914CS.312 H-3924CS.312 H-3928CS.312 H-3938CS.312
0.265" (6.7mm) H-3914CS.265 H-3924CS.265 H-3928CS.265 H-3938CS.265
1/4" (6.3mm) H-3914CS.250 H-3924CS.250 H-3928CS.250 H-3938CS.250
1/8" (3.17mm) H-3914CS.125 H-3924CS.125 H-3928CS.125 H-3938CS.125

101mm 305mm No. 3-1/2 (5.6mm) H-3914FS3-1/2 H-3924FS3-1/2 H-3928FS3-1/2 H-3938FS3-1/2

No. 4 (4.75mm) H-3914FS4 H-3924FS4 H-3928FS4 H-3938FS4
No. 5 (4.0mm) H-3914FS5 H-3924FS5 H-3928FS5 H-3938FS5
No. 6 (3.35mm) H-3914FS6 H-3924FS6 H-3928FS6 H-3938FS6
No. 7 (2.80mm) H-3914FS7 H-3924FS7 H-3928FS7 H-3938FS7
No. 8 (2.36mm) H-3914FS8 H-3924FS8 H-3928FS8 H-3938FS8
No. 10 (2.00mm) H-3914FS10 H-3924FS10 H-3928FS10 H-3938FS10
No. 12 (1.70mm) H-3914FS12 H-3924FS12 H-3928FS12 H-3938FS12
No. 14 (1.40mm) H-3914FS14 H-3924FS14 H-3928FS14 H-3938FS14
No. 16 (1.18mm) H-3914FS16 H-3924FS16 H-3928FS16 H-3938FS16
No. 18 (1.0mm) H-3914FS18 H-3924FS18 H-3928FS18 H-3938FS18
No. 20 (850μm) H-3914FS20 H-3924FS20 H-3928FS20 H-3938FS20
No. 25 (710μm) H-3914FS25 H-3924FS25 H-3928FS25 H-3938FS25
No. 30 (600μm) H-3914FS30 H-3924FS30 H-3928FS30 H-3938FS30
No. 35 (500μm) H-3914FS35 H-3924FS35 H-3928FS35 H-3938FS35
No. 40 (425μm) H-3914FS40 H-3924FS40 H-3928FS40 H-3938FS40
No. 45 (355μm) H-3914FS45 H-3924FS45 H-3928FS45 H-3938FS45
No. 50 (300μm) H-3914FS50 H-3924FS50 H-3928FS50 H-3938FS50
No. 60 (250μm) H-3914FS60 H-3924FS60 H-3928FS60 H-3938FS60
No. 70 (212μm) H-3914FS70 H-3924FS70 H-3928FS70 H-3938FS70
No. 80 (180μm) H-3914FS80 H-3924FS80 H-3928FS80 H-3938FS80
No. 100 (150μm) H-3914FS100 H-3924FS100 H-3928FS100 H-3938FS100
No. 120 (125μm) H-3914FS120 H-3924FS120 H-3928FS120 H-3938FS120
No. 140 (106μm) H-3914FS140 H-3924FS140 H-3928FS140 H-3938FS140
No. 170 (90μm) H-3914FS170 H-3924FS170 H-3928FS170 H-3938FS170
No. 200 (75μm) H-3914FS200 H-3924FS200 H-3928FS200 H-3938FS200
No. 230 (63μm) H-3914FS230 H-3924FS230 H-3928FS230 H-3938FS230
No. 270 (53μm) H-3914FS270 H-3924FS270 H-3928FS270 H-3938FS270
No. 325 (45μm) H-3914FS325 H-3924FS325 H-3928FS325 H-3938FS325
No. 400 (38μm) H-3914FS400 H-3924FS400 H-3928FS400 H-3938FS400
No. 450 (32μm) H-3914FS450 H-3924FS450 H-3928FS450 H-3938FS450
No. 500 (25μm) H-3914FS500 H-3924FS500 H-3928FS500 H-3938FS500
No. 635 (20μm) H-3914FS635 H-3924FS635 H-3928FS635 H-3938FS635
No. 850 (10μm) H-3914FS850 H-3924FS850 H-3928FS850 H-3938FS850
No. 1000 (2μm) H-3914FS1000 H-3924FS1000 H-3928FS1000 H-3938FS1000

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 53
AGGREGATE Sieves

Brass Frame, Stainless Mesh

USA Standard
Sieve Size ASTM Test Sieves
3" Diameter 5" Diameter 6" Diameter 10" Diameter
1" Deep 1.5" Deep 1.5" Deep 3" Deep
4" (100mm) - - - H-3919CS4.000
3-1/2" (90mm) - - - H-3919CS3.500
3" (75mm) - - - H-3919CS3.000
2-1/2' (63mm) - - - H-3919CS2.500
2.12" (53mm) - - - H-3919CS2.120
2" (50mm) - - - H-3919CS2.000
1-3/4" (45mm) - - - H-3919CS1.750
1-1/2" (37.5mm) - - - H-3919CS1.500
1-1/4" (31.5mm) - - - H-3919CS1.250
1.06" (26.5mm) - - - H-3919CS1.060
1" (25.0mm) H-3913CS1.000 H-3915CS1.000 H-3916CS1.000 H-3919CS1.000
7/8" (22.4mm) H-3913CS.875 H-3915CS.875 H-3916CS.875 H-3919CS.875
3/4" (19.0mm) H-3913CS.750 H-3915CS.750 H-3916CS.750 H-3919CS.750
5/8" (16.0mm) H-3913CS.625 H-3915CS.625 H-3916CS.625 H-3919CS.625
0.530" (13.2mm) H-3913CS.530 H-3915CS.530 H-3916CS.530 H-3919CS.530
1/2" (12.5mm) H-3913CS.500 H-3915CS.500 H-3916CS.500 H-3919CS.500
7/16" (11.2mm) H-3913CS.438 H-3915CS.438 H-3916CS.438 H-3919CS.438
3/8" (9.5mm) H-3913CS.375 H-3915CS.375 H-3916CS.375 H-3919CS.375
5/16" (8.0mm) H-3913CS.312 H-3915CS.312 H-3916CS.312 H-3919CS.312
0.265" (6.7mm)
1/4" (6.3mm)
1/8" (3.17mm)
H-3913CS.265
H-3913CS.250
H-3913CS.125
H-3915CS.265
H-3915CS.250
H-3915CS.125
H-3916CS.265
H-3916CS.250
H-3916CS.125
H-3919CS.265
H-3919CS.250
H-3919CS.125
3" 5" 6" 10"
No. 3-1/2 (5.6mm) H-3913FS3-1/2 H-3915FS3-1/2 H-3916FS3-1/2 H-3919FS3-1/2
76mm 127mm 152mm 254mm
No. 4 (4.75mm) H-3913FS4 H-3915FS4 H-3916FS4 H-3919FS4
No. 5 (4.0mm) H-3913FS5 H-3915FS5 H-3916FS5 H-3919FS5
No. 6 (3.35mm) H-3913FS6 H-3915FS6 H-3916FS6 H-3919FS6
No. 7 (2.80mm) H-3913FS7 H-3915FS7 H-3916FS7 H-3919FS7
No. 8 (2.36mm) H-3913FS8 H-3915FS8 H-3916FS8 H-3919FS8
No. 10 (2.00mm) H-3913FS10 H-3915FS10 H-3916FS10 H-3919FS10
No. 12 (1.70mm) H-3913FS12 H-3915FS12 H-3916FS12 H-3919FS12
No. 14 (1.40mm) H-3913FS14 H-3915FS14 H-3916FS14 H-3919FS14
No. 16 (1.18mm) H-3913FS16 H-3915FS16 H-3916FS16 H-3919FS16
No. 18 (1.0mm) H-3913FS18 H-3915FS18 H-3916FS18 H-3919FS18
No. 20 (850μm) H-3913FS20 H-3915FS20 H-3916FS20 H-3919FS20
No. 25 (710μm) H-3913FS25 H-3915FS25 H-3916FS25 H-3919FS25
No. 30 (600μm) H-3913FS30 H-3915FS20 H-3916FS20 H-3919FS20
No. 35 (500μm) H-3913FS35 H-3915FS35 H-3916FS35 H-3919FS35
No. 40 (425μm) H-3913FS40 H-3915FS40 H-3916FS40 H-3919FS40
No. 45 (355μm) H-3913FS45 H-3915FS45 H-3916FS45 H-3919FS45
No. 50 (300μm) H-3913FS50 H-3915FS50 H-3916FS50 H-3919FS50
No. 60 (250μm) H-3913FS60 H-3915FS60 H-3916FS60 H-3919FS60
No. 70 (212μm) H-3913FS70 H-3915FS70 H-3916FS70 H-3919FS70
No. 80 (180μm) H-3913FS80 H-3915FS80 H-3916FS80 H-3919FS80
No. 100 (150μm) H-3913FS100 H-3915FS100 H-3916FS100 H-3919FS100
No. 120 (125μm) H-3913FS120 H-3915FS120 H-3916FS120 H-3919FS120
No. 140 (106μm) H-3913FS140 H-3915FS140 H-3916FS140 H-3919FS140
No. 170 (90μm) H-3913FS170 H-3915FS170 H-3916FS170 H-3919FS170
No. 200 (75μm) H-3913FS200 H-3915FS200 H-3916FS200 H-3919FS200
No. 230 (63μm) H-3913FS230 H-3915FS230 H-3916FS230 H-3919FS230
No. 270 (53μm) H-3913FS270 H-3915FS270 H-3916FS270 H-3919FS270
No. 325 (45μm) H-3913FS325 H-3915FS325 H-3916FS325 H-3919FS325
No. 400 (38μm) H-3913FS400 H-3915FS400 H-3916FS400 H-3919FS400
No. 450 (32μm) H-3913FS450 H-3915FS450 H-3916FS450 H-3919FS450
No. 500 (25μm) H-3913FS500 H-3915FS500 H-3916FS500 H-3919FS500
No. 635 (20μm) H-3913FS635 H-3915FS635 H-3916FS635 H-3919FS635
No. 850 (10μm) H-3913FS850 H-3915FS850 H-3916FS850 H-3919FS850
No. 1000 (2μm) H-3913FS1000 H-3915FS1000 H-3916FS1000 H-3919FS1000

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

54
Sieve Pans & Covers, Accessories AGGREGATE
H-3799

H-3770

HN-3952
H-3773

Sieve Pans H 2813

H-2813
H-
H-3774
and Covers

H-3772

Larger Brushes on Page 319

H-3802
H-4329.5

Sieve Separator Pans Sieve Covers with Ring Handle Magnifying Comparator
Description Description The magnifying comparator is ideal for use in
Dia x Depth
Brass Stainless Brass Stainless
Dia x Depth examining sieve mesh for size verification, as well
3" x 1" H-3913SP — 3" H-3913BC H-3913SC as general inspection for damage. The instrument
3" x 3" H-3913DSP — is supplied complete with four interchangeable
4" H-3914BC —
scales:
4" x 1.5" H-3914SP — 5" H-3915BC —
#121— .5 x .005" Ruler line scale
4" x 4" H-3924SP — 6" H-3916BC — #122— 15 x .1mm Ruler line scale
5" x 1" H-3915SP — 8" H-3930BC H-3930SC #172— .5 x 0.1" Parallel line scale
6" x 1.625" H-3916SP — 10" H-3919BC — #173— .5 x 1/64" Parallel line scale
8" x 1" H-3955SP H-3955SSP 12" H-3912BC H-3912SC Magnifying Comparator H-2813
Shipping wt. 0.8 lbs (.45kg)
8" x 2" H-3956SP H-3956SSP
NIST Reference Materials — Glass Beads Clean-N-Stor, for 8" Sieves
8" x 4" H-3945SP —
This Standard Reference Material (SRM) is intend- The clean-n-stor accessory is a handy, time-saving
8" x 6" H-3946SP — ed primarily for use in evaluating and calibrating device for emptying, cleaning and weighing
8" x 8" H-3947SP — particle size measurement instrumentation, in this sieves. Inverting an 8" sieve on the stainless steel
case, sieves.It consists of a single bottle containing funnel allows quick emptying of the contents into
10" x 8" H-3919SP —
approximately 200g of solid spherical soda-lime a receiving scoop or pan. Includes scoop and soft,
12" x 1" H-3932SP H-3932SSP glass beads. Typical use is in the evaluation of wire horsehair sieve brush. The adjustable height clean-
12" x 2" H-3922SP H-3922SSP cloth test sieves for conformity and accuracy in the n-stor is for use with taller sieves.
range from #20 (2.00mm) through #635 (20μm).
12" x 3.25" H-3912SP H-3912SSP Clean-N-Stor Sieve Accessory H-3802
Percent of glass beads retained on each sieve is
Clean-N-Stor, Adjustable Height H-3801
12" x 4" H-3928SP — calculated, and effective opening of each of the Shipping wt. 6 lbs (2.6kg)

12" x 6" H-3929SP — sieves is determined from calibration data on the Sieve Brushes
NIST Certificate supplied with the bead material.
12" x 8" H-3938SP — Horsehair, wood handle; 2.75" x 1.125" x .75"
NIST Reference Glass Beads (70 x 29 x 19mm), 10.5" (267mm) overall length.
Sieve Bottom Pans
Range Model Horsehair Sieve Brush, Oval Shape H-3799
Description Brass Stainless
Shipping wt. 1 lbs (.45kg)
Dia x Depth No. 10 – 20 (2450 – 750μm) HN-3950
Horsehair, wood handle; 2.5" x 1" x .375" (64 x
3" x .625" H-3913HP H-3913SS No. 25 – 60 (750 – 220μm) HN-3951
25 x 10mm), 10.5" (267mm) overall length.
3" x 1" H-3913P — No. 45 – 140 (400 – 100μm) HN-3952 Horsehair Sieve Brush for Fine Mesh H-3770
Shipping wt. 1 lbs (.45kg)
4" x 1.5" H-3914P — No. 120 – 270 (125 – 53μm) HN-3953
Wire, plastic handle; 1.5" x 1.25" dia. (38 x
5" x 1" H-3915P — No. 400 – 635 (38 – 20μm) HN-3954
32mm), 5.25" (133mm) overall length.
6" x 1.625" H-3916P — No. 30 – 635 (600 – 45μm) HN-3955 Wire Sieve Brush for Fine Mesh H-3773
Shipping wt. 1 lbs (.45kg)
8" x 1" H-3960P H-3960SS Sieve Balls Horsehair, wood handle; 1.5" x 1.25" dia. (38 x
8" x 2" H-3920P H-3950SS General-purpose, rubber balls that resists oil, 32mm), 5.25" (133mm) overall length.
10" x 2" H-3919P — grease, and abrasion are used in aiding in or
Horsehair Sieve Brush for Fine Mesh H-3774
cleaning sieve material. Test results may also Shipping wt. 1 lbs (.45kg)
12" x 1" H-3932P H-3932PSS
benefit, due to less clumping of material.
Wire, wire loop handle; 1.5" x .75" x .125" (38 x 19
12" x 2" H-3922P — Sieve Ball, 1", Package of 1 H-4329.1 x 3mm), 5.5" (140mm) overall length.
12" x 3" H-3912P H-3912SS Sieve Balls, 0.625" Package of 10 H-4329.5
Shipping wt. 0.5 lbs (.25kg) Wire Sieve Brush for Coarse Mesh H-3772
Shipping wt. 1 lbs (.45kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 55
AGGREGATE Sieves

H-4100 Series

H-3903
H-4391

H-3902

18" Dia. Brass Frame, Riddle Sieves Sieve Set, Rocker-Type Sieve Set, Soil Analysis, 5" Dia.
ASTM E11, AASHTO M92 For sieve analysis of coarse aggregates and other These sieves are used by agricultural engineers for
materials. Consists of a 12" (305mm) square their accuracy and ease of handling. Frames are
Brass frame riddles (sieves), which are 4.5" deep,
frame with handles mounted on a collector box seamless brass with rolled edges and extended
are made with stainless steel wire cloth and are used
with rockers. Includes 3" (76.1mm), 2" (50.8mm), skirts for nesting. Set includes: (1) ea of: No. 10, 20,
to wash, sift and strain samples used to drain off
1.5" (38.1mm), 1" (25.4mm), .75" (190mm), .5" 40, 60, 80, 100 pan and cover.
liquids and separate aggregates and dry materials
(12.7mm), .375" (9.51mm) and No. 4 ASTM wire Sieve Set, Soil Analysis, 5" Dia. H-3903
in the sieve analysis of concrete and other materials.
screen plates with square openings Shipping wt. 7 lbs (4.5kg)
18" Brass Frame, Riddle Sieves See chart
Screen plates finer than No. 20 mesh are not Replacement Screens for Soil Analysis Sieves
recommended for this unit. Screens are held in Screen No. Model
Screen No. Mesh Size Model place with two locking devices on opposite sides.
#10 H-3903.10
4" 100mm H-4109.4 All screens can be clamped into frame for carrying
or storage. OD 15.25 x 12.25" x 10" (387 x 311 #20 H-3903.20
3.5" 90mm H-4109A
x 354mm). Replacement screens are available, see #30 H-3903.30
3" 75mm H-4109
chart below. #40 H-3903.40
2.5" 63mm H-4108 Sieve Set, Rocker-Type H-4391 #50 H-3903.50
2.0" 50mm H-4107 Shipping wt. 24 lbs (19kg)
#60 H-3903.60
1.5" 37.5mm H-4106 Replacement Screens for Rocker-Type Sieves #80 H-3903.80
1.25" 31.5mm H-4105A
Screen No. Mesh Size Model #100 H-3903.100
1" 25.0mm H-4105
4" 100mm H-4391.004 Cover H-3903C
.875" 22.4mm H-4104A
3.5" 90mm H-4391.008 Pan, 1" deep H-3903P
.75" 19.0mm H-4104
3" 75mm H-4391.010
.625" 16.0mm H-4103A
2.5" 63mm H-4391.012 Soil Analysis Sieve Set, 5" Dia. Perforated Plate
.5" 12.5mm H-4103
2.0" 50mm H-4391.020 Set includes pan, cover and five metric perforated,
.375" 9.5mm H-4102
1.5" 37.5mm H-4391.250 plate sieves. Screening surfaces are perforated
.25" 6.3mm H-4101
1.25" 31.5mm H-4391.312 brass plate with 0.5mm, 1mm, 2mm, 3mm and
No. 3.5 5.60mm H-4100.3 5mm size openings. Frames are 5" (127mm) dia.
1" 25.0mm H-4391.375
No. 4 4.75mm H-4100.4 by 1.5" (38mm) deep.)
.875" 22.4mm H-4391.438
No. 5 4.00mm H-4100.5 Soil Analysis Sieve Set, Perforated Plate H-3902
.75" 19.0mm H-4391.500 Shipping wt. 7 lbs (4.5kg)
No. 6 3.35mm H-4100.6
.625" 16.0mm H-4391.625
No. 7 2.80mm H-4100.7
.5" 12.5mm H-4391.750
No. 8 2.36mm H-4100.8
.375" 9.5mm H-4391.1000
No. 10 2.00mm H-4100.10
.25" 6.3mm H-4391.1250
No. 12 1.70mm H-4100.12
No. 3.5 5.60mm H-4391.1500
No. 14 1.40mm H-4100.14
No. 8 2.36mm H-4391.2500
No. 16 1.18mm H-4100.16
No. 10 2.00mm H-4391.3500
No. 18 1.00mm H-4100.18
No. 12 1.70mm H-4391.4000
No. 20 0.85mm H-4100.20
Cover H-4100C
Bottom Pan H-4100P

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

56
Sieves, Wet Washing AGGREGATE

H-3948 H-3945 H-3942, H-3943

Corps of Engineers Wash Screen Assembly Wet-Wash Sieves, Deep Frame Wet Wash Sieves, Replaceable Mesh
ASTM E11, AASHTO M92 ASTM E11, AASHTO M92 ASTM E11, AASHTO M92
Wash screen assembly is used to wash out fines Wet-wash sieves are used in the determination of These sieves feature cost-effective, replaceable
from samples of base coarse materials. It is used for fines content or to wash away fines when preparing sieve cloth and mesh backups, which extend
a rapid check of minus No. 200 fines in aggregate samples for particle size testing. They are available cloth life, as well as allow quick replacement of
and soil samples. Assembly has a 10 to 12 lb. (4.5 in 8" and 12" diameters with depths of 4", 6" and damaged screens. Sieves are available in either
to 5.4kg) capacity. It includes a 12" (305mm) dia. 8". Sieves are constructed of brass frames with No. 200 or 325 mesh sizes with a No. 10 backup
x 10" deep (254mm) brass frame with a No. 200 either stainless steel cloth or stainless steel cloth screen included. Screen material is held securely
mesh detachable screen with a No. 10 backup with a back-up cloth for durability. These sieves can between rubber gaskets and bolted to the frame.
screen for support. The assembly also includes a also be ordered in almost any size mesh material 20 Replacement sieve material is available in sizes 20
lift-out, No. 10 overload screen at midpoint. Easily mesh and finer, call 1.800.544.7220 for availability. mesh and finer— call for availability.
disassembles for cleaning and replacing mesh. The chart to the right lists the most popular sizes. Wet Wash Sieves, Replaceable Mesh See chart
COE Wash Screen Assembly H-3948 Wet Washing Sieves, Deep Frame See chart
Shipping wt. 15 lbs (7kg)

No. 10 Lift-out, Overload Screen H-3948M10

Shipping wt. 2.3 lbs ( 1kg) Wet Wash Sieves, Deep Frame (other mesh sizes available, inquire: 1.800.544.7220)
No. 200 Mesh H-3948M200 Size Description Ship wt.
Shipping wt. 0.7 lb (.5kg) Model
in. (mm) dia. x depth lbs. (kg)
No. 200 SS mesh H-3945 3.5
8" x 4" (203 x 102mm)
No. 200 SS mesh with back-up cloth H-3945RC (3.2)

No. 200 SS mesh H-3946 2.7

8" x 6" (203 x 152mm)
No. 200 SS mesh with back-up cloth H-3946RC (3.6)

No. 200 SS mesh H-3947 3.7

8" x 8" (203 x 203mm)
No. 200 SS mesh with back-up cloth H-3947RC (4.0)

No. 200 SS mesh H-3928FS200 4.1

12" x 4" (305 x 102mm)
No. 200 SS mesh with back-up cloth H-3928FS200RC (5.0)

No. 200 SS mesh H-3929FS200 5.1

12" x 6" (305 x 152mm)
No. 200 SS mesh with back-up cloth H-3929FS200RC (5.9)

No. 200 SS mesh H-3938FS200 5.8

12" x 8" (305 x 203mm)
No. 200 SS mesh with back-up cloth H-3938FS200RC (6.3)

Wet Wash Sieves, Replaceable Mesh (other mesh sizes available, inquire: 1.800.544.7220)
Size Description Ship wt.
Model
All Wet Wash Sieves are available from 50- in. (mm) dia. x depth lbs. (kg)
400 mesh. Call 1-800-544-7220 to order mesh Sieve with No. 200 SS mesh and back-up cloth H-3942 2.8
sizes not listed. 8" x 4" (203 x 102mm)
Sieve with No. 325 SS mesh and back-up cloth H-3942FS325 (3.2)

Sieve with No. 200 SS mesh and back-up cloth H-3943 6

8" x 6" (203 x 152mm)
Sieve with No. 325 SS mesh and back-up cloth H-3943FS325 (3.6)

No. 200 SS replacement mesh only H-3942.200

0.25
8" (203mm) No. 325 SS replacement mesh only H-3942.325
(.5)
Gasket for wet wash sieve H-3942G

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 57
AGGREGATE Wet Washing,
g Aggregate
gg g Washers

H-3806

H-3949A

H-3880

H-3807 H-4328
H-4328.2 Bucket and
Sieves (not included)

Cement Wet Washing Sieves separations. The sieves are held firmly in place by Aggregate Washer, Table-Top Model
ASTM E11; AASHTO M92 a friction fit of the sieve's nesting ring, so a pan ASTM C117
Stainless steel mesh sieves with nickel-plated brass having a nesting ring can be used in lieu of one This lightweight, table-top aggregate washer has
frame have replaceable mesh and solder-less sieve. All PVC-coated, 115V 60Hz for intermittent a capacity of 8lb (3.6kg) and is designed to be
duty, 3-wire cord and plug, on-off switch, and
construction. Sieves include three, screwed-on legs located near a sink drain on a laboratory counter
a neoprene wet-protective motor cap. The
for support and to facilitate sample drying on hot H-4328.5F version includes the H-4328.1, a 220V top. The easily removable drum that measures
plates and in ovens. Legs are quick and easy to 50Hz transformer. 9" diameter by 10.75" deep (229 x 273mm) is
remove to facilitate mesh replacement. These sieves Wet/Dry Sieve Shaker, 120V 60Hz H-4328 manufactured from stainless steel for rust and
are available in mesh sizes from 50 to 400 mesh, for Wet/Dry Sieve Shaker, 220V 50Hz H-4328.5F corrosion resistance. In operation, the washer
those not listed, contact Humboldt: 1.800.544.7220 Shipping wt. 8.5 lbs (5kg) applies a gentle agitation to the sample in the
Cement, Wet Washing Sieves See chart Bucket, 5-gallon for H-4328 revolving drum until all particles are washed,
Bucket is notched to securely hold the H-4328 separated and the overflow water runs clear. The
sieve shaker in place. unit is supplied complete with a permanent water
Model Description
Bucket, 5-gallon for H-4328 H-4328.2 connect with regulator valve, tubing, saddle valve,
2" x 3" high (52 x 76mm) with No. Shipping wt. 3 lbs (1.4kg) stainless steel goose-neck water tube with swivel
H-3807
325 replaceable mesh connection and a 6-ft. power cord with GFCI plug
Wet Washing Sieve Apparatus
3" x 3.5" H (76 x 89mm) w/ ASTM C430, D1514, AASHTO T192 and Test for operator safety. Order USA Standard Sieve,
H-3804
No. 200 replaceable mesh 200 mesh separately from the chart below.
Standard No. 158 (Method 211)
4" x 4.5" H (102 x 114mm) w/ Controls spray and water pressure. Includes valve, Aggregate Washer, 120V 60Hz H-3880
H-3803
No. 200 replaceable mesh Aggregate Washer, 220V 50/60Hz H-3880.4F
pressure gauge, piping and H-3808 spray nozzle. Shipping wt. 33.1 lbs (18kg)
4" x 4.5" H (102 x 114mm) w/ Wet Washing Sieve Apparatus H-3806
H-3809
No. 325 replaceable mesh Shipping wt. 2.8 lbs (1.4kg)
2" dia. No. 325 replacement Spray Nozzle Replacement H-3808 Sieves for use with Aggregate Washers
H-3807.325
mesh disk Shipping wt. 1 lb (.45kg)
Model Description
3" dia. No. 200 replacement Gauge Replacement H-3806.1
H-3804.200 Shipping wt. 1 lb (.45kg) Standard, Full Height, No. 200
mesh disk H-3920FS200
Mesh, 8" dia. Sieve
4" dia. No. 200 replacement Aggregate Washer
H-3809.200 ASTM C117 Standard, Full Height, No. 200
mesh disk H-3912FS200
Mesh, 12" dia. Sieve
H-3807.4 Replacement Leg Aggregate washer with 15lb. (6.8kg) capacity
removes clay, aggregate particles and water- Standard, Full Height, No.16
H-3807.5 Replacement Screw H-3920FS16
Mesh, 8" dia. Sieve
soluble materials by the decanted wash water.
Specimen is agitated sufficiently to completely Standard, Full Height, No. 16
Wet/Dry Sieve Shaker H-3912FS16
separate all particles. Revolving drum is 11" dia. x Mesh, 12" dia. Sieve
Lightweight cast aluminum, electrically operated
13"D (27 x 33cm) and locks in four angle positions.
portable sieve shaker is designed for use with one
Includes valve and .375" goose-neck water tube.
or two 8" diameter full-height or four half-height
O.D. 24" x 20" x 27" H (610 x 508 x 686mm).
testing sieves. Used for wet or dry screening of
Order USA Standard Sieve, 200 mesh separately
solid particles. When placed over a bucket or sink,
from chart at right.
the unit provides the necessary shaking motion
Aggregate Washer, 120V 60Hz H-3949A
and frees the operator from a fatiguing task.
Aggregate Washer, 220V 50Hz H-3949A.4F
The sieve shaker has the advantage of being Shipping wt. 116 lbs (52kg)
portable for making dry, gross separations
and is convenient in making reproducible wet

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

58
Sieve Shakers AGGREGATE

H-4325

H-4330

HA-4425V, HA-4430V
HA-4425, HA-4430

Sieve Shaker, Digital Timer Variable-Speed Sieve Shaker, Digital Timer Humboldt, Economy Sieve Shaker
ASTM C136 ASTM C136 ASTM C136
The Humboldt digital shaker allows the user to set Humboldt's variable-speed, digital, sieve shaker The Humboldt economy sieve shaker can be used
a time of up to 60 minutes with automatic shutoff. builds upon the economical and time-proven with 3", 5" and 8" sieves. It can handle up to ten
It features an easy-to-use digital interface with an design of the Humboldt Sieve Shaker, by adding 8" sieves, twelve 5" sieves, sixteen 3" full-height
accuracy of 0.5%. The HA-4425 sieve shaker builds a variable-speed option. The variable-speed dial sieves or eighteen half-height 8" sieves. It features
upon the economical and time-proven design provides a wide range of settings that can be a 30 minute, easy-to-use, mechanical timer and
of the Humboldt Sieve Shaker, which has been easily set. And, also features an easy-to-use digital durable construction, which has been proven over
providing dependable service for many years. interface with an accuracy of 0.5%. many years of daily use. This shaker uses a 1/4
This sieve shaker can be used with 3", 5" and 8" This sieve shaker can be used with 3", 5" and 8" hp motor with a 30-minute timer. Unit should be
sieves and can handle up to ten 8" sieves, twelve sieves and can handle up to ten 8" sieves, twelve bolted to bench for correct operation. Dimensions
5" sieves, sixteen 3" full-height sieves or eighteen 5" sieves, sixteen 3" full-height sieves or eighteen 15"w x 15"d x 45"h (380 x 380 x 1143mm).
half-height 8" sieves. half-height 8" sieves. Economy Sieve Shaker, 120V 60Hz H-4325
The large version can be used with 8", 10" and 12" The large version can be used with 8", 10" and 12" Economy Sieve Shaker, 220V 60Hz H-4325.2F
sieves. It can handle up to eleven 8" sieves, seven Economy Sieve Shaker, 220V 50Hz H-4325.5F
sieves. It can handle up to eleven 8" sieves, seven Shipping wt. 72 lbs (29.5kg)
10" sieves, seven 12" full-height sieves, nineteen 10" sieves, seven 12" full-height sieves, nineteen
half-height 8" sieves or thirteen half-height 12" Humboldt, Large, Economy Sieve Shaker
half-height 8" sieves or thirteen half-height 12"
sieves. ASTM C136
sieves.
This shaker uses a 1/4 hp motor with a 60-minute The Humboldt large economy sieve shaker can be
Both shakers use a DC motor with a 60-minute
timer. Unit should be bolted to bench for correct used with 8", 10" and 12" sieves. It can handle up
timer. Unit should be bolted to bench for correct
operation. Dimensions 15"w x 15"d x 45"h (380 x to eleven 8" sieves, seven 10" sieves, seven 12"
operation. Dimensions 15"w x 15"d x 45"h (380 x
380 x 1143mm). full-height sieves, nineteen half-height 8" sieves
380 x 1143mm).
or thirteen half-height 12" sieves. It features a 30
Sieve Shaker, Digital Timer, 120V 60Hz HA-4325 Variable Speed Shaker, Digital, 120V 60Hz HA-4325V
Sieve Shaker, Digital Timer, 220V 60Hz HA-4325.2F minute, easy-to-use, mechanical timer and durable
Variable Speed Shaker, Digital, 220V 60Hz HA-4325V.2F
Sieve Shaker, Digital Timer, 220V 50Hz HA-4325.5F construction, which has been proven over many
Variable Speed Shaker, Digital, 220V 50Hz HA-4325V.5F
Shipping wt. 72 lbs (32.6kg) years of daily use. This shaker uses a 1/4 hp motor
Large Sieve Shaker, Digital, 120V 60Hz HA-4330 Large Shaker, Digital, Variable 120V 60Hz HA-4330V with a 30-minute timer. Unit should be bolted to
Large Sieve Shaker, Digital, 220V 60Hz HA-4330.2F Large Shaker, Digital, Variable 220V 60Hz HA-4330V.2F bench for correct operation. Dimensions 21"w x
Large Sieve Shaker, Digital, 220V 50Hz HA-4330.5F Large Shaker, Digital, Variable 220V 50Hz HA-4330V.5F 18"d x 47"h (533 x 4570 x 1194mm).
Shipping wt. 95 lbs (43kg) Shipping wt. 72 lbs (29.5kg)
Large Economy Shaker, 120V 60Hz H-4330
Large Economy Shaker, 220V 60Hz H-4330.2F
Large Economy Shaker, 220V 50Hz H-4330.5F
Shipping wt. 95 lbs (38.5kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 59
AGGREGATE Sieve Shakers

H-4321, H-4327

H-4326

H-4320, H-4322

H-4310

Humboldt, Hand-Operated Sieve Shaker Ro-Tap® Sieve Shaker, 12" Sieves out of the box. Unit holds six full-height 8" sieves,
ASTM C136 ASTM C136 plus one pan and cover or fourteen, half-height
The Humboldt, hand-operated sieve shaker can The Ro-Tap sieve shaker provides a compact sieves, plus one pan and cover. Uses a vertically-
be used with 3", 5" and 8" sieves. It can handle design and aggressive sieving action. This shaker mounted, enclosed 1/4 hp electric motor and a
up to ten 8" sieves, twelve 5" sieves, sixteen provides 278 oscillations and 150 taps per built-in digital timer (+/- 2 seconds over 24 hours).
3" full-height sieves or eighteen half-height 8" minute to produce an effective sieving action. It is Dimensions: 28" x 21" x 25"(711 x 533 x 635 mm).
sieves. Unit should be bolted to bench for correct powered by a 1/4 hp motor and provides a built-in Dura Tap™ Sieve Shaker, 120V 60Hz H-4321
operation. Dimensions 15"w x 15"d x 45"h (380 x 99 minute step-down timer. Unit holds up to six, Dura Tap™ Sieve Shaker, 220V 60Hz H-4321.2F
380 x 1143mm). 12" intermediate-height (2") sieves, plus a pan. Dura Tap™ Sieve Shaker, 220V 50Hz H-4321.5F
Shipping wt. 225 lbs (102kg)
Humboldt, Hand-Operated Sieve Shaker H-4310 Dimensions: 28" x 21" x 25" (711 x 533 x 635mm).
Shipping wt. 54 lbs (22kg) ® Dura Tap™, Motorized Sieve Shaker
Ro-Tap 12" Sieve Shaker, 120V 60Hz H-4322
Ro-Tap® 12" Sieve Shaker, 220V 60Hz H-4322.2F ASTM C136
Sieve Shaker for 3" Sieves
Small, simple shaker for use with 3" sieves. Unit Ro-Tap® 12" Sieve Shaker, 230V 50Hz H-4322.5F Designed for use with 12" sieves, this industrial-
Shipping wt. 172 lbs (86kg) strength sieve shaker is engineered with rugged
vibrates at 2000 vpm and creates a cyclonic
effect, which produces a sieving action. Will Sound Enclosure, Ro-Tap® steel and alloy materials, ready to withstand
accommodate up to six 3" sieves and uses a 1/20 This sound enclosure can be used with either 8" or everyday, harsh duty cycles. Grease fittings are
hp motor. 12" Ro-Tap shakers (H-4320 and H-4322). Cabinet provided to ensure longer life for your bearings,
Sieve Shaker, 3" Sieves, 115V 60Hz H-4326 is lined with 1" (25.4mm) of foam for sound and each unit is "burned in" by continuously
Sieve Shaker, 3" Sieves, 220V 50Hz H-4326.5F deadening. Air vents are built in. running it for over 4 hours, ensuring performance
Shipping wt. 9.7 lbs (2.7kg)
Sound Enclosure, Ro-Tap® H-4324 right out of the box. Unit holds four, full-height 12"
Ro-Tap® Sieve Shaker, 8" Sieves Shipping wt. 120 lbs (41kg) sieves, plus one pan and cover or eight, half-height
ASTM C136 Shaker Stand sieves, plus one pan and cover. Uses a vertically-
The Ro-Tap sieve shaker provides a compact Sturdy lightweight, aluminum stand can be used mounted, enclosed 1/4 hp electric motor and a
design and aggressive sieving action. This shaker with either 8" or 12" Ro-Tap shakers (H-4320 and built-in digital timer (+/- 2 seconds over 24 hours).
provides 278 oscillations and 150 taps per H-4322). Dimensions: 28" x 21" x 25"(711 x 533 x 635 mm).
minute to produce an effective sieving action. It is Shaker Stand for Ro-Tap® H-4320.4 Dura Tap™ Sieve Shaker, 120V 60Hz H-4327
powered by a 1/4 hp motor and provides a built-in Shipping wt. 50 lbs (13kg) Dura Tap™ Sieve Shaker, 220V 60Hz H-4327.2F
Dura Tap™ Sieve Shaker, 220V 50Hz H-4327.5F
99 minute step-down timer. Unit holds up to six, Dura Tap™, Motorized Sieve Shaker Shipping wt. 225 lbs (102kg)
8" full-height (2") sieves, plus a full-height pan. ASTM C136
Dimensions: 28" x 21" x 25" (711 x 533 x 635mm). Designed for use with 8" sieves, this industrial-
Ro-Tap® 8" Sieve Shaker, 120V 60Hz H-4320 strength Sieve Shaker is engineered with rugged
Ro-Tap® 8" Sieve Shaker, 220V 60Hz H-4320.2F steel and alloy materials ready to withstand
Ro-Tap® 8" Sieve Shaker, 230V 50Hz H-4320.5F everyday, harsh duty cycles. Grease fittings are
Shipping wt. 172 lbs (86kg)
provided to ensure longer life for your bearings, and
each unit is "burned in" by continuously running it
for over 4 hours, guaranteeing performance right

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

60
Sieve Sifters AGGREGATE

H-4315A
H-4312

Mary Ann® Sieve Sifter The support stand also serves as a sieve storage a totally enclosed unit, which can be used with 8"
ASTM C136 rack. Assembled Sifter requires 18" x 40" (457 or 12" sieves. Sieve stack capacity is six full-height
The "Original Mary Ann" sieve sifter has been a x1016mm) of floor space. Unit Dimensions: 18" x (3") 12" sieves with a bottom pan. Unit timing is
standard of the industry for years. This totally- 26" x 58" (457 x 660 x 1473mm). controlled by a digital count-down controller with
enclosed unit can be used with 8" or 12" sieves. Mary Ann® Sieve Sifter, 120V 60Hz H-4315A a large, red LED display. Operation can be set from
Sieve stacks up to 26" (660mm) in height can be Mary Ann® Sieve Sifter, 230V 50Hz H-4315A.5F 1 to 99 minutes. Settings can be saved between
Shipping wt. 140 lbs (64kg) tests to speed operation and provide repeatability
set into place quickly with no clamping needed.
The Mary Ann design angles the sieves at 45° Rotary Lab Sieve Sifter of tests. Dimensions: 19" x 24" x 58" (483 x 610 x
while rotation from a 1/3hp motor and tapping ASTM C136 1473mm).
from hardwood-faced aluminum hammers The rotary lab sieve sifter borrows its design from Rotary Lab Sieve Sifter, 120V 60Hz H-4312
promote action to accomplish the sieving process. the Mary Ann sieve sifter. Like the Mary Ann, it is Rotary Lab Sieve Sifter, 230V 50/60Hz H-4312.4F
Shipping wt. 215 lbs (98kg)

Sieve Shaker Comparison Chart Use the chart below to check and compare specifications between the various Sieve Shakers.

Sieve dia. Sieve capacity* Timer Requires Motor Dimensions

Description Model ASTM
in. mm full inter. half minutes Mounting HP WxDxH

Humboldt Sieve Shaker, Digital Timer HA-4425 3 76 16 60

15" x 15" x 45"
Humboldt Sieve Shaker, Digital, Variable HA-4425V 5 127 12 C136 60 Yes 1/4
(381 x 381 x 1143mm)
Humboldt, Economy Sieve Shaker H-4325 8 203 10 18 30

Large Sieve Shaker, Digital Timer HA-4430 8 203 11 19 60

21" x 18" x 47"
Large Sieve Shaker, Digital, Variable HA-4430V 10 254 7 C136 60 Yes 1/4
(533 x 457 x 1194mm)
Large Economy Sieve Shaker H-4330 12 305 7 11 13 30
3 76 16
15" x 15" x 45"
8" Hand Sieve Shaker H-4310 5 127 12 C136 30 Yes 1/4
(381 x 381 x 1143mm)
8 203 10 18
8 203 10 99 13" x 35" x 45"
Mary Ann Sieve Sifter H-4315A C136 No 1/3
12 305 6 Digital (330 x 889 x 1143mm)

8 203 10 20 99 19" x 24" x 58"

Rotary Lab Sieve Sifter H-4312 C136 No 1/3
12 305 6 Digital (483 x 610 x 1473mm)

24 hr. 28" x 21" x 25"

Dura-Tap™ Sieve Shaker H-4321 8 203 7 14 C136 No 1/4
Digital (711 x 533 x 635mm)
24 hr. 28" x 21" x 25"
Dura-Tap™ Sieve Shaker H-4327 12 203 4 7 8 C136 No 1/4
Digital (711 x 533 x 635mm)
99 28" x 21" x 25"
Ro-Tap® Sieve Shaker H-4320 8 203 6 13 C136 No 1/4
Digital (711 x 533 x 635mm)
99 28" x 21" x 25"
Ro-Tap® Sieve Shaker H-4322 12 305 4 6 C136 No 1/4
Digital (711 x 533 x 635mm)
* includes top cover and pan

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 61
AGGREGATE Air-Jet Sieve, Specific Gravity
H-4334A.3F
H-4334A.3

H-3360

H-4335F200
H-4

H-3373A

H-4334A.2
H-3380 H-3381
H-4334A.3
H-4334A.4

Micron Air-Jet Sieving Apparatus Specific Gravity of Fine Aggregate Kit,

U.S. Std.
Effective single sieve for dry powders, fragile Micron Model ASTM C128; AASHTO T84
Mesh
samples or material that can’t be wet sieved, Kit designed to provide you with the basic
No. 8 2360 H-4335F8
Micron air-jet sieve shaker uses 200mm dia. sieve equipment to do specific gravity and absorption of
drums, with 2mm to 20μ particle size range. Unit No. 10 200 H-4335F10 fine aggregate testing. The kit includes a H-3360
adapts to 75mm diameter electro-formed sieves No. 12 1700 H-4335F12 conical mold and tamper; H-3381 pycnometer top
in 90mm drums for 45μ to 5μ. Timer and vacuum and 1 qt. (.95L) glass jar, HB-4533A .1g readability,
No. 14 1400 H-4335F14
controls allow reproducibility of the results. Filter 2600 gram scale; H-30120 lab oven, and H-3966
attachment, micro-mesh sieve or cyclone collector No. 16 1180 H-4335F16
.75" (19mm) sample splitter.
accessories may be used to recover fines. Includes No. 18 850 H-4335F18 Specific Gravity Kit, 120V 60Hz H-3373A
200mm cast aluminum sieve drum housing unit, No. 20 850 H-4335F20 Specific Gravity Kit, 230V 50/60Hz H-3373A.4F
acrylic lid, 15W slotted brass air nozzle, 0-15 minute Shipping wt. 132 lbs (60kg)
No. 25 710 H-4335F25
rotary timer switch. Vacuum and Sieves are not Conical Mold and Tamper
included. Accessories and air-jet sieve drums are No. 30 600 H-4335F30 ASTM C128; AASHTO T84
available; call for details and pricing. No. 35 500 H-4335F35 Used for determination of bulk and apparent
Micron Air Jet Apparatus, 120V 60Hz H-4334A.3F No. 40 425 H-4335F40 specific gravity and absorption of fine aggregate.
Shipping wt. 168 lbs (30kg)
Brass mold is 40mm ID at top, 90mm ID at bottom,
No. 45 355 H-4335F45
75mm high. Steel tamper weighs 12 oz (340g) and
No. 50 300 H-4335F50 has 1" dia. (25mm) flat circular tamping face.
Model Description
No. 60 250 H-4335F60 Conical Mold and Tamper H-3360
H-4334A.2 HEPA Vacuum System Conical Mold Only H-3361
No. 70 212 H-4335F70
High-Efficiency HEPA Vacuum Tamper Only H-3362
H-4334A.3 No. 80 180 H-4335F80 Shipping wt. 1.8 lbs (1kg)
System
H-4334A.4 High-Efficiency Cyclone No. 100 150 H-4335F100 Pycnometer Top and Glass Jar
No. 120 125 H-4335F120 ASTM C128
Micron Air-Jet Sieves Pycnometer top and 1qt. (.95L) glass jar set for
No. 140 106 H-4335F140
ASTM E11 determining specific gravity of fine aggregate.
No. 170 90 H-4335F170
For use with Air-Jet sieving systems. Stainless steel Top is spun brass with .375" (10mm) hole in one
frame and cloth mesh. 7.875" dia. (200mm) frame No. 200 75 H-4335F200 end; threaded end fits 1- or 2-qt. (1 or 2L) glass
with rubber seal. Overall height: 1.75" (44.5mm). No. 230 63 H-4335F230 jar. Includes rubber gasket that fits on jar mouth to
Depth to cloth: 1.125" (28.6mm). Each sieve is prevent fine particles from becoming deposited in
No. 270 53 H-4335F270
supplied with a serial number and matching “Test the threads. Order additional jars below
Sieve Certificate” for traceability . No. 325 45 H-4335F325 Pycnometer Top and Glass Jar H-3381
Micron Air Jet Sieves see chart No. 400 38 H-4335F400 Glass Jar, 1qt. (.95L) H-3380.2
Shipping wt. 2 lbs (1kg) Pycnometer Top Only H-3380
No. 450 32 H-4335F450 Shipping wt. 2 lbs (1kg)
No. 500 25 H-4335F500
No. 635 20 H-4335F635

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

62
Specific Gravity AGGREGATE

H-2712A
H-2712A.6

H-2713B
H-2717

H-2710A.1
H-2716

Deluxe Specific Gravity Bench Heater/Circulator Assembly Compact Specific Gravity Tank
ASTM C20, C127, C642, C830, D1188, D2041, Comprised of a 200-watt, durable tank heater with Heater & Circulator
D2726; AASHTO T85, T166, T209, T275 and circulating pump attached to stainless steel ASTM C20, C127, C642, C830, D1188, D2041,
bracket that hangs on specific gravity tank to D2726; AASHTO T85, T166, T209, T275
Our specific gravity weighing bench is 46"
(1168mm) tall with a 31" x 25" (787 x 635mm) maintain constant temperature bath. Includes a 10-gallon polyethylene tank with internal
platform top, which includes a hole to Heater/Circulator Assembly dimensions of 12" x 12" x 18" (305 x 305 x 457mm)
accommodate the weigh-below scale; and, a 120V 60Hz H-2712A.6 The tank comes with a drain valve and overflow
crank-operated shelf that lets you bring the water 220V 50/60Hz H-2712A.6.4F port. It also comes with a H-2712A.6, 200-watt,
Shipping wt. 3.5 lbs (2kg) durable tank heater and circulating pump, both of
tank up to the sample, making for easier sample
immersion. Bench ONLY. Compact Specific Gravity Bench Set which are attached to a stainless steel mounting
ASTM C20, C127, C642, C830, D1188, D2041, bracket that holds both securely to the tank.
Deluxe Specific Gravity Bench H-2710A.1
Shipping wt. 116 lbs (52kg) D2726; AASHTO T85, T166, T209, T275 Compact Tank w/ Heater & Circulator
Deluxe Specific Gravity Bench Set The compact specific gravity bench set includes 120V 60Hz H-2716
ASTM C20, C127, C642, C830, D1188, D2041, our compact bench, which measures 15.75" 220V 50/60Hz H-2716.4F
Shipping wt. 18 lbs (8kg)
D2726; AASHTO T85, T166, T209, T275 x 19.75" x 39" High (400 x 502 x 991mm) and
The deluxe specific gravity bench set includes our includes a hole to accommodate the weigh-below
deluxe bench, a H-2712A specific gravity tank kit scale. It includes a 10-gallon polyethylene tank Recommended Scales:
with internal dimensions of 12" x 12" x 18" (305 Ohaus Ranger 7000 High-Capacity Balance
with heater and circulating pump.
x 305 x 457mm) The tank comes with a drain valve The Ranger 7000 balance has been designed for
Order a weigh-below scale and sample
and overflow port. It also comes with a H-2712A.6, industrial applications. The HB-3515 features a
containers separately.
200-watt, durable tank heater and circulating 15,000g capacity with a readability of 0.1g. and a
Specific Gravity Set, 120V 60Hz H-2713B weigh-below hook.
pump, both of which are attached to a stainless
Specific Gravity Set, 220V 50/60Hz H-2713B.4F
Shipping wt. 110 lbs (48kg) steel mounting bracket that holds both securely 15,000g x 0.1g Precision Balance, 120V 60Hz HB-3515
to the tank. The compact specific gravity bench 15,000g x 0.1g Precision Balance, 220V 50/60Hz HB-3515.4F
Specific Gravity Tank with Heater & Circulator Ship wt. 32lbs. (13.4kg)
includes two sample containers, a 7.5" dia x 7.4"
ASTM C20, C127, C642, C830, D1188, D2041,
tall (191 x 191mm) container and a 5.5" x 8.25" Ohaus Explorer High-Capacity Balance
D2726; AASHTO T85, T166, T209, T275
(140 x 210mm) open, wired holder. The Explorer high-capacity balance provides a
26 gal. (98.4L) polyethylene tank, which measures durable and accurate solution to this application .It
Order a weigh-below scale separately.
18" x 18" x 18" and comes with a drain valve and features internal calibration and a integral weigh-
Specific Gravity Set, 120V 60Hz H-2717
overflow port. It also comes with a H-2712A.6, below hook. The HB-4508A features a 24,000g
Specific Gravity Set, 220V 50/60Hz H-2717.4F
200-watt, durable tank heater and circulating Shipping wt. 110 lbs (48kg) capacity with a readability of 0.1g.
pump, both of which are attached to a stainless
12,000g x 0.1g Precision Balance, 120V 60Hz HB-4506A
steel mounting bracket that holds both securely to
12,000g x 0.1g Precision Balance, 220V 50/60Hz HB-4506A.4F
the tank.
24,000g x 0.1g Precision Balance, 120V 60Hz HB-4508A
Tank w/ Heater & Circulator, 24,000g x 0.1g Precision Balance, 220V 50/60Hz HB-4508A.4F
120V 60Hz H-2712A Ship wt. 29lbs. (12.5kg)
220V 50/60Hz H-2712A.4F
Shipping wt. 18 lbs (8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 63
AGGREGATE Specific Gravity

HB-4506A

HB-3535 H-3354,
3354 H-3357,
H 3357 H-3358
H 335

H-3351 H-3353

HB-4545B

H-3371
H-3355 H-3372
H-2715 H-3356

Adam Nimbus 7000 High-Capacity Balance Drain Down Baskets Hollow Tube Specific Gravity Cradle
Innovative design creates a smaller footprint, so Stainless steel wire mesh baskets feature reinforced Through this unique, yet simple stainless steel
the Nimbus occupies minimal space on the lab construction and bail-type handle. Dimensions: hollow tube designed, water displacement is
bench. Order a weigh-below hook, HB-4545B.1. 4.25" x 5.5" dia. (108 x 140mm). virtually eliminated for improved accuracy in
12,000g x 0.1g Precision Balance, 120V 60Hz HB-4543B Drain Down Basket, 0.25" mesh H-3354 specific gravity test applications.
12,000g x 0.1g Precision Balance, 220V 50/60Hz HB-4543B.4F Drain Down Basket, #8 mesh H-3357 Hollow Tube Specific Gravity Cradle H-2715
16,000g x 0.1g Precision Balance, 120V 60Hz HB-4545B Drain Down Basket, #16 mesh H-3358 Shipping wt. 2.4 lbs (1.1kg)
Shipping wt. 2.7 lbs (1.2kg)
16,000g x 0.1g Precision Balance, 220V 50/60Hz HB-4545B.4F Utility Bucket
Ship wt. 29lbs. (12.5kg) Specific Gravity Basket ASTM C127
See page 308-309 for additional choices in bal- ASTM C127 Heavily galvanized utility bucket has wire-
ances for use in this application. Stainless steel No. 8 wire stainless steel mesh reinforced top edge, bail-type handle and 14-qt.
basket features reinforced construction and bail- (13L) capacity.
Sample Container type handle. Dimensions: 8" x 8" dia. (203 x Utility Bucket H-3372
ASTM C88; AASHTO T104 203mm). Shipping wt. 4 lbs (1.6kg)

For use in testing aggregate soundness, the Specific Gravity Basket H-3371
Shipping wt. 2.7 lbs (1.2kg)
container is used to immerse samples of coarse
aggregate in solution and then transfer samples Specific Gravity Sieve #4
to an oven for uniform drying in minimum time. Designed for use in specific gravity test
No. 4 stainless steel wire mesh, bottom soldered applications. Heavy-guage brass construction
to frame after fabricating. Overall dimension: 10" 8" Specific Gravity Sieve #4 H-3355
x 4" dia. (254 x 102mm) with .125" (3mm) round 12" Specific Gravity Sieve #4 H-3356
Shipping wt. 3lbs (1.4kg)
wire handle.
Sample Container H-3351
Shipping wt. 2.3 lbs (1.04kg)

Sample Container
ASTM C88; AASHTO T104
Used to immerse samples of coarse aggregates
in solution and transfer samples to oven. No. 8
stainless steel wire mesh, bottom-soldered to
frame after fabrication. Overall dimension: 5.5" x
4" dia. (140 x 102mm).
Sample Container H-3353
Shipping wt. 6 lbs (2.7kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

64
Specific Gravity AGGREGATE

H-3385

H-3386

H-3387

H-3393

H-3383F H-3400 H-3460

H-3383L H-2660 H-2640

Specific Gravity Flask (Phunque Flask) Volumetric Flasks Specific Gravity Bottles (Pycnometers)
AASHTO T354 ASTM D854; AASHTO T100 ASTM D854; AASHTO T100
The phunque flask is the key element in a method Glass flasks used in specific gravity determinations Adjusted bottle for routine commercial testing,
for conducting specific gravity/absorption are calibrated to contain the rated capacity at 20°C fitted with ground-in perforated stopper. Capillary
determinations for aggregate. This method has within permissible tolerances. Available with and vent stopper design allows stopper to be inserted
been designed to eliminate the inherent guess without a stopper100ml Volumetric Flask H-3391 to fixed depth in the bottle's neck. Small hole in
work built into ASTM C128 and AASHTO T84— 250ml Volumetric Flask H-3392 center of stopper allows emission of air and surplus
the current cone and tamper methods in use today. 250ml Volumetric Flask with Stopper H-3394 water. Volume of the bottle has been adjusted at
This is easy to perform, easy to understand and 500ml Volumetric Flask H-3393 20°C.
easily reproducible between technicians and labs. 500ml Volumetric Flask with Stopper H-3395 Specific Gravity Bottle, 100ml H-3387
The test is very easy to run and can be reliably Shipping wt. 1 lbs (0.45kg)
Specific Gravity Bottle, 50ml H-3386
run in the field. This can be especially helpful in Specific Gravity Flask (Le Chatelier) Specific Gravity Bottle, 25ml H-3385
asphalt operations where specific gravities can ASTM C128, C188; AASHTO T133 Shipping wt. 0.3 lbs (0.2kg)

make a big impact on pay factors. This test lets the For determining the specific gravity of hydraulic Hubbard-Carmick Specific Gravity Bottle
contractor check specific gravities on the material cement, dust, sand and other fine materials. The ASTM D70, D115, D2343; AASHTO T228, T43
he is currently using, not lab tests, which may not body holds approximately 250ml. The oval bulb Modified 24ml, wide-mouth Hubbard-Carmick,
be current. The H-3388F is for fine aggregate and in the neck holds 17ml. Volume below the bulb is Erlenmeyer-style bottle allows easy filling and
has a neck approximately 1" in diameter. The graduated from 0 to 1.0ml in 0.1ml subdivisions, cleaning and is very stable.
H-3388L is used for coarse aggregate and has a with an additional 0.1 subdivision below the 0 and Hubbard-Carmick Specific Gravity Bottle H-2660
neck approximately 2" in diameter. The scale on above the 1.0ml mark. The neck is graduated from Shipping wt. 0.4 lbs (0.2kg)
both items is readable to 0.1 grams; Both include 18 to 24ml in 0.1ml subdivisions above the bulb Hubbard 24ml Specific Gravity Bottle
an excel calculation sheet and a swabbing utensil (white graduations). The stopper is a number 13. ASTM D70, D115, D1963; AASHTO T228
to keep the neck of the flask dry during loading Specific Gravity Flask (Le Chatelier) H-3400 Hubbard-form 24ml bottle for determination of
Fine Aggregate Flask H-3383F Shipping wt. 1.8 lbs (1kg)
specific gravity of semi-solid bituminous materials,
Coarse Aggregate Flask H-3383L Specific Gravity Flask (Chapman) asphalt cements, soft tar pitches and emulsions.
Shipping wt. 12 lbs (7kg)
ASTM C70; AASHTO T142 Features ground-in stopper with 1.6mm hole.
The Chapman flask has a wide base and two Hubbard 24ml Specific Gravity Bottle H-2640
bulbs and is used in the determination of moisture Shipping wt. 0.3 lbs (0.15kg)
content in fine aggregate by displacement in
water. It can also be used to adjust the aggregate
mass for moisture content and to determine
surface moisture contribution to mixing water in
portland cement concrete. Graduated at 200ml
between the bulbs, and from 375ml to 450ml in
1ml divisions in the neck.
Specific Gravity Flask (Chapman) H-3460
Shipping wt. 2.5 lbs (1kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 65
AGGREGATE Moisture

H-4965A

H-4978

H-4967
(includes pelican case)
H-4966

Speedy® 2000 Moisture Tester, 20g Speedy® 2000 Moisture Tester, 6g Moisture Tester Reagent
ASTM D4944; AASHTO T217; Florida FM5-507 The Series 2000 Speedy 6g moisture tester provides Calcium carbide reagent for Speedy® Moisture
The Series 2000 Speedy moisture tester is a moisture testing for smaller 6g samples of material. Testers. Carton of 24-1 lb. (0.5kg) containers.
portable system for measuring the moisture The tester is supplied complete with heavy-duty Shipped via motor freight only. See Hazardous
content of a wide range of materials including plastic carrying case, electronic balance, beaker, Warning.
soils, aggregates, dust and powders (and liquids). cleaning cloth, cap, washer, scoop and cleaning Moisture Testing Reagent H-4966
The system consists of a low pressure vessel fitted brushes. This model is not ASTM compliant Ship wt. 28lbs (11.7kg)
with a pressure gauge and an electronic scale and and does not include the steel pulverizing balls.
Replacement Parts for Speedy
test accessories. Moisture measurements are made Does not include calcium carbide reagent, See
hazardous material warning. Description Model
by mixing a weighed sample of the material with
a calcium carbide reagent in the sealed pressure Portable Scale, 200g x 0.1g H-4967.1
Speedy® 2000 Moisture Tester, 6g H-4968
vessel. The reagent reacts chemically with water Shipping wt. 15 lbs (5.9kg) Beaker, 60ml Plastic H-4967.2
in the sample, producing acetylene gas that in
Gauge, replacement H-4963G
turn increases the pressure within the vessel. The
pressure increase in the vessel is proportional to HAZARDOUS WARNING: Gauge, gasket- 0.75" OD H-4963.15
the amount of water in the sample, the moisture Danger of explosion/fire may result if Moisture Testing Speedy Scoop H-4963.15
Reagent is allowed contact with moisture. Calcium
content can be read directly from the calibrated Speedy Brush, wire handle H-4963.16A
carbide forms flammable acetylene gas when wet
pressure gauge. The tester is supplied complete so it must be kept sealed and dry. Provide adequate
Brush, for scale pan H-4963.14
with heavy-duty plastic carrying case, electronic ventilation and use away from sparks and flame.
balance, beaker, cleaning cloth, cap, washer, U.S. shipping regulations now require truck shipment Pulverizer, steel ball H-4963B
scoop, steel pulverizing balls and cleaning brushes. for all quantities of calcium carbide. For this reason we
no longer provide testing reagent (calcium carbide) Aggrameter
Does not include calcium carbide reagent, See
with Speedy Moisture Testers. To purchase calcium Formerly known as the Trident, the Aggrameter
hazardous material warning on this page. carbide for use with Speedy testers, please order
utilizes the latest microwave and microprocessor
H-4966, which is a case of 24, 1 lb (0.5kg) canisters.
Description This item requires shipment by truck. technology to measure moisture content in various
Accuracy Within 0.5% on most materials International shipping regulations require separate fine and coarse-grained materials. The prongs
purchase of reagent, which requires "dangerous of the probe are inserted into the material to be
45 sec. to 3 min., depending goods" papers and packing. For this reason, Speedy
Test Speed tested and the percentage of moisture content
on material Moisture Testers for International orders do not
is instantaneously shown on the easy to read
Calibrated from 0-20% mois- contain reagent, order separately.
Gauge display. The Aggrameter comes calibrated for both
ture based on wet weight
sand and aggregate, and can be programmed
Electronic; 0-7 oz (0-200g) Calibration Kit, Speedy Tester by the user for up to ten different materials. The
Balance
range; battery operated A self-contained unit designed to enable an Aggrameter can store more than 150 readings –
operator to check the accuracy of the Speedy complete with time and date for future reference.
Speedy® 2000 Moisture Tester, 20g H-4967
Shipping wt. 16.6 lbs (5.9kg) moisture tester. The unit is comprised of a master Aggrameter H-4978
dial, integral air pump, control connections and Shipping wt. 5lbs (2.3kg)
tools for checking gauge accuracy and pressure
leaks, with instructions for simple re-calibrations.
Includes case.
Calibration Kit, Speedy Tester H-4965A
Shipping wt. 20 lbs (9kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

66
Classification AGGREGATE

H-4216

H-1682

Flakiness Sieves
H-1680A H-1686

H-1684

Void Content Apparatus, Fine Aggregate Flakiness Gauge for Classification of Aggregate
Item Part No.
ASTM C1252; AASHTO TP33 BS 812
Used to determine the uncompacted void content Overflow Pan, 12" x 1.5"Aluminum H-4940.6 For determining flakiness index. Particle is flaky
of a fine aggregate sample. Indicates the angularity, Material Handling Scoop H-3731 when its thickness (smallest dimension) is less than
sphericality, and workability of fine aggregate in a Glass Plate, 170mm H-1686.2 0.6 of the mid-size of the sieve fraction. Gauge
mixture. Includes 100 ml brass cylindrical measure, has seven, labeled slots for manual evaluation
funnel assembly, funnel stand, and glass plate Proportional Caliper Device of particles in the seven openings. The mass of
for calibration. Order overflow pan, scoop and ASTM D4791 all flaky particles (passing appropriate slots) as
strike-off spatula separately. percent of the sample is the flakiness index. Gauge
Use to determine the percentage of flat particles,
Void Content Apparatus H-1680A is enameled sheet metal with clearly marked sieve
elongated particles, or both flat and elongated
Shipping wt. 3 lbs (1kg) fraction ranges for each slot.
particles in coarse aggregates. Steel construction
for strength and durability, plated for corrosion Flakiness Gauge for Aggregate H-1684
Item Part No. Shipping wt. 3 lbs (1kg)
resistance. 6" x 16" (152.4 x 406.4mm) base
Overflow Pan, 12" x 1.5"Aluminum H-4940.6 Flakiness Sieves Set
plate with four rubber feet for stability, and for
Material Handling Scoop H-3731 convenience in tabletop testing. Ratio desired BS 812

Spatula, 6-inch H-4906 is obtained by selecting one of four adjustable Complete set of flakiness sieves. These sieves are
positions: 2 = l:2; 3 = 1:3; 4 = 1:4; or 5 = 1:5. It used to determine if aggregate is flaky. Aggregate
Glass Plate, 4" x 4" x .0375" H-3049
is recommended that the desired procedure be is considered flaky if its thickness is less than
Void Content Apparatus, Coarse Aggregate reviewed carefully prior to conducting the test. 0.6 of nominal size. Set is comprised of Sieves
AASHTO T326 Proportional Caliper Device H-4216 listed in the chart below. Sieves can be ordered
Used to determine the void content of Shipping wt. 10 lbs (4kg) separately as well.
uncompacted coarse aggregate used in HMA Elongation Index for Aggregate Classification Model Size (W x L) Passing Retained
applications. When used on aggregate of a known BS 812
H-4392.4.9 4.9 x 30mm 10mm 6.3mm
size, the void content provides the user with an For determining elongation index. Particle is H-4392.7.2 7.2 x 40mm 14mm 10mm
indication of the angularity, sphericity and surface elongated when its length (longest dimension) is
H-4392.10.2 10.2 x 50mm 20mm 14mm
texture as compared to other course aggregate of more than 1.8 of the mid-size of the sieve fraction.
the same grading. In operation, the aggregate is Aggregate to be classified is separated into seven H-4392.14.4 14.4 x 60 mm 28mm 20mm
allowed to free-fall 115mm from the funnel bottom sieve fractions from 63 to 6.3mm, and each fraction H-4392.19.7 19.7 x 80mm 37.5mm 28mm
into a 154mm diameter by 160mm high cylindrical is examined separately. Six labeled openings H-4392.26.3 26.3 x 90mm 50mm 37.5mm
measure. The excess heaped aggregate is struck between pairs of metal pins measure particle from H-4392.33.9 33.9 x 100mm 63mm 50mm
off using the included bar, the mass is measured, each of the six sieve cuts below 50mm. The mass
and the void content is computed. The apparatus of all elongated particles (failing to pass between
consists of a stainless steel hopper, stand, measure Flakiness Sieves Set H-4392
pins) as percent of the sample is the elongation Shipping wt. 33 lbs (15.8kg)
and strike-off bar and a 170mm square glass plate index.
for calibration of the measure. Elongation Index H-1682
Void Content Apparatus, Coarse H-1686 Shipping wt. 3 lbs (1kg)
Shipping wt. 30 lbs (14kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 67
AGGREGATE L.A. Abrasion, Slake

HM-4100A.2

H-3860.100
(shown with H-3860D, not included)

H-3860D HM-4100A

Los Angeles Abrasion Machine Abrasion Charge Slake Durability Apparatus

ASTM C131, C535; AASHTO T96 ASTM C131, C535; AASHTO T96 ASTM D4644
The Los Angeles abrasion machine is used to Replacement abrasive charge for H-3860 Los The Slake durability apparatus is used to
measure the degradation of mineral aggregate of Angeles abrasion machine. Consists of 12 determine the durability of rocks and the probable
standard gradings resulting from a combination hardened-steel balls. amount of deterioration of weak rocks, over
of actions including abrasion or attrition, impact Abrasion Charge H-3865 a period of time, after simulated exposure to
and grinding in a rotating steel drum containing Shipping wt. 12 lbs (6kg) nature’s continual wetting and drying cycles. The
a specified number of steel spheres. The test is Materials Catch Pan for LA Abrasion apparatus consists of a base-mounted, motor-drive
widely used as an indicator of the relative quality Replacement pan for use with LA abrasion unit with two mesh drums and two water tanks
of various sources of aggregate having similar machine. Dimensions: 24" x 24" x 4" (609 x 609 x with quick-release drive assemblies. The drums
mineral compositions. 101mm), tapered sides. rotate at a speed of 20 revolutions per minute.
Humboldt's design follows the ASTM-preferred Materials Pan for LA Abrasion H-3860.19 Options include two extra drums and tanks for
Shipping wt. 20.9 lbs (9kg) running up to four tests simultaneously. To aid in
design and features a welded, structural-steel
frame, fabricated .5"-thick (913mm) abrasion- Sound Enclosure for LA Abrasion Machine sample preparation, additional mesh drums are
resistant steel drum, a removable shelf, bolted to Full enclosure designed to cut down on noise recommended. Dimensions: 48" x 14" x 9.25"
the drum and a balanced drum assembly for easy generated while using the LA abrasion machine. (1,219 x 355 x 235mm)
rotation by hand. The enclosed chain drive rotates Unit is steel construction with foam lining for Slake Durability, 120V 60Hz HM-4100A
the drum without a conventional slip clutch. This noise reduction. Pre-drilled holes accommodate Slake Durability, 220V 50Hz HM-4100A.5F
Shipping wt. 78 lbs (32kg)
positive drive delivers greater accuracy. The self- mounting controller on outside of enclosure.
contained worm-drive motorized speed reducer Sound Enclosure for LA Abrasion H-3860.100 Slake Wire Mesh Drums
has anti-friction bearings and sealed lubrication. Shipping wt. 250 lbs (113kg) ASTM D4644
The 1hp, electronically-controlled motor is Set of two wire mesh drums for use with Slake
equipped with large, push-button controls and an durability apparatus.
automatic overload cutout. The controls can be Slake Wire Mesh Drums HM-4100A.1
removed from the Abrasion Machine and mounted Shipping wt. 20 lbs (9.1kg)

outside a sound enclosure or mounted on a nearby Drum and Tank Assembly

wall. Unit includes user-configured, revolution ASTM D4644
counter, a material catch pan and one abrasion Set of two wire mesh drums and water tank
charge consisting of 12 hardened-steel balls. assemblies.
Dimensions: 39" x 29" x 37" (991 x 737 x 940mm). Drum and Tank Assembly HM-4100A.2
LA Abrasion Machine, 120V 60Hz H-3860D Shipping wt. 45lbs (20.4kg)
LA Abrasion Machine, 220V 60Hz H-3860D.2F
LA Abrasion Machine, 220V 50Hz H-3860D.5F
Shipping wt. 870 lbs (394kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

68
Micro-Deval AGGREGATE

H-3875.1 H-3875.3

H-3875.2
H-3875

Micro-Deval Apparatus and two 5,500g abrasive charges. A magnet is Sieves for Micro-Deval Testing
ASTM D6928, D7428; AASHTO T327; Texas 845- included to assist in removing the abrasive charge ASTM D6928, D7428; AASHTO T327; Texas 845-
49-40; Ontario LS-618 after the test is complete. For additional sample 49-40; Ontario LS-618
The micro-deval test measures abrasion resistance preparation capacity and greatly reduced testing Sieves are required for use in conjunction with
and durability of mineral aggregates. An times, it is recommended that additional sample micro-deval testing, and are ordered separately.
aggregate sample is placed in a sealed stainless jars and abrasive charges be used. Below are the required mesh sizes called for by the
steel jar with an abrasive charge of up to 5,000g Overall dimensions are: 20.5" x 13.5" x 38" (521 x ASTM specifications. Order 8" sieves from page 46
of 9.5mm diameter stainless steel balls and water, 343 x 965mm). and 12" sieves from page 47. Wet wash sieving can
then rotated at 100rpm for two hours. Aggregate Optional H-3876 model is equipped with thermally be useful at completion of the abrasion cycle, see
quality is determined by percentage loss in protected motor to meet stricter requirements pages 56-57 for wet-sieving accessories.
gradation results at completion. The micro-deval's in some areas. Check your local code before
smaller size, smaller sample quantities and simpler ordering. Slightly different equipment meeting
procedure make this test method easier and less Coarse Aggregate Fine Aggregate
European standard EN 1097-1 is also available and
costly to perform than traditional methods. can be quoted upon request. ASTM D6928 ASTM D7428
The micro-deval meets current ASTM, AASHTO, Micro-Deval, 120V 60Hz H-3875 .75" (19mm) No. 4 (4.75mm)
and Canadian test methods, as well as more Micro-Deval, 230V 50Hz H-3875.5F .625" (16mm) No. 8 (2.36mm)
stringent Texas DOT requirements. This Micro-Deval, 120V 60Hz H-3876
contemporary version of the micro-deval test should Shipping wt. 248 lbs (113kg) .5" (12.5mm) No. 16 (1.18mm)
not be confused with older versions originating in Micro-Deval 5L Sample Jar .375" (9.5mm) No. 30 (600μ)
Europe which use different equipment and test ASTM D6928, D7428; AASHTO T327; Texas 845-
.265" (6.3mm) No. 100 (150μ)
protocol. A sophisticated electronic controller with 49-40; Ontario LS-618
No. 4 (4.75mm) No. 200 (75μ)
optical sensing system accurately tracks test time, Five liter sample jar with locking cover for use with
total revolutions and rpm of jars. Test duration Micro Deval.
may be controlled by either elapsed time or total Micro-Deval 5L Sample Jar H-3875.1
revolutions. Jars stop within a fraction of one Shipping wt. 13 lbs (6kg)

revolution at test termination. Jar revolution and Micro-Deval Abrasive Charge

speed data may also be used as a verification of ASTM D6928, D7428; AASHTO T327; Texas 845-
machine performance. 49-40; Ontario LS-618
Sample jars revolve behind polycarbonate doors For additional sample preparation capacity and
equipped with safety interlocks, so no moving greatly reduced testing times, order additional
parts are exposed during operation as opposed to abrasive charges.
older designs, which used unguarded open rollers. Micro-Deval Abrasive Charge H-3875.2
The micro-deval machine is a two-tier unit with ` Shipping wt. 13 lbs (6kg)
sturdy steel frame. Each tier carries one stainless Micro-Deval Abrasive Charge Magnet
steel 5 liter sample jar, which has a 194mm ID Magnet is used to assist in removing the abrasive
and a 170mm internal height with locking cover. charge from the sample slurry after the Micro-
Power to the rubber-covered rollers is supplied by Deval test is complete.
a .75hp, electric motor through a gear transmission Micro-Deval Abrasive Charge Magnet H-3875.3
and chain drive. The unit is supplied with two jars ` Shipping wt. 13 lbs (6kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 69
AGGREGATE Rock Testing

H-3422

H-3419

H-3420
H-3418

Moh's Scale of Hardness by ISRM and ASTM are implemented into the Equotip 550
Designed to determine mineral hardness by the hammer for automatic calculation of the rebound Extensively used for rock hardness and for
scratch test method. Set includes 9 specimens, number. The option is also there to define a user investigating weathering effects on rocks. Can
from talc to carborundum. Numbered specimens specific statistics method. be used for correlation to unconfined or uniaxial
are keyed to descriptions inside box cover. Unconfined Compressive Strength: ISRM compressive strength (UCS); testing on weak
Moh‘s Scale of Hardness H-3422 recommends a correlation between UCS and the rocks, porous rocks and those with thin weathering
Shipping wt. 2 lbs (1kg) crusts; cores; rectangular blocks and investigations
rebound value based on the formula UCS = aebR
Scratch Hardness Tester (where R is the rebound value). A correlation in of hardness near edges of samples. The impact
Determines quantity of soft particles in coarse this format may be defined in the PC software and energy is approximately 1/200th that of the Type
aggregates on basis of scratch hardness. N rebound hammer. This makes it very suitable for
downloaded onto the RockSchmidt.
Apparatus consists of 0.0125" (1.6mm) dia. brass testing on historical sites, very soft types of rock
rod with rounded point inserted into plunger. Young’s (E-) Modulus: ISRM recommends a
that cannot be tested with a rebound hammer and
Overall weight of brass point and plunger is 2 ±0.1 correlation between elastic modulus and the
also on brittle rock cores that would be damaged
lbs (8.9 ±0.4N). Plunger is mounted on support rebound value based on the formula Et = cedR
by a rebound hammer. The impact device type S
stand, permitting plunger to lower and raise freely. (where R is the rebound value). A correlation in
Furnished with (1) replacement brass rod. features the same impact energy and a much more
this format may be defined in the software and
durable ceramic impact body that is more suited
Scratch Hardness Tester H-3420 downloaded to the RockSchmidt.
Shipping wt. 16 lbs (7kg) to heavy users on harder rock. All units include:
Weathering Grade: Impacting on the same location Equotip Touchscreen incl. Battery, Power Supply,
Item Part No. twice can be used to correlate to weathering USB Cable, Surface Roughness Comparator Plate,
grade. The ISRM recommended method has DVD with Software, Documentation, Carrying
Brass Rods (pkg. of 10) for H-3420 H-3421
been included in the device. RockSchmidt, Strap and Carrying Case Use with Equotip Leeb
Rock Schmidt includes battery charger with USB cable, DVD Impact Device S, purchased separately.
ASTM D5873, with PC software, carrying strap, grinding stone, Equotip 550 Basic Unit H-3417
documentation and carrying bag Equotip 550 Leeb D H-3418
The RockSchmidt is a variation of the SilverSchmidt
Shipping wt. 4.9 lbs (2.2kg)
rebound hammer, which has been adapted
RockSchmidt Specifications
specifically for rock testing applications, such as
Impact energy N: 2.207Nm — L: 0.735 Nm Item Part No.
UCS correlations or the prediction of penetration
rates for tunnel boring machines and rotary drum Max. Impacts 99 per series Equotip Leeb Impact Device S H-3418.1
cutters. Battery Life 5000 impacts Device Cable 5 ft (1.5m) H-3418.2
The following features of the hammer make it ideal Device Cable 15 ft (5m) H-3418.3
IP Classification IP54
for rock testing applications:
Impact Angle Independence: The rebound value is
RockSchmidt Hammer H-3419
independent of the impact direction. Shipping wt. 4.9 lbs (2.2kg)
Optimized for Field Work: Tighter sealing against
dirt and dust intrusion for longer life. Significantly
lighter and more ergonomic than the classic
Schmidt hammer. A large number of readings can
be saved and downloaded later to a PC.
Preset Statistics: Statistics methods recommended

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

70
Rock Testing AGGREGATE

HS-4158

HS-4170
HS-4171

HS-4157

Point Load Tester Aggregate Impact Value Aggregate Crushing Value

ASTM D5731; EN 1997, Used to determine the impact value of aggregates The aggregate crushing value provides a relative
This apparatus is used to determine the strength and select them for a given application. The device measure of the resistance of an aggregate to crushing
values of a rock specimen, both in the field and in has a trip-action hammer release, blow counter under a gradually applied compressive load. Consists
the laboratory. It consists of a load frame for apply- device and a built-in operator safety device. Heavy- of a piston, piston cover, base plate, tamping rod and
ing loads up to 55kN, a mounted hydraulic ram duty construction with hardened steel surfaces measure. Available in two sizes 150mm and 75mm.
and a pressure gauge with 0.001kN precision for for minimum wear. The complete assembly is Hoek Cell, 150mm HS-4170
maximum load indication. An upper conical platen cadmium plated for corrosion protection. Includes Hoek Cell, 75mm HS-4171
counter, mold and tamping rod. Shipping wt. 33 lbs (15kg)
is fixed on the frame and a lower one on the jack
piston. A graduated scale is fixed on the frame Aggregate Impact Value HS-4158
Shipping wt. 36 lbs (16.5kg)
and indicates the specimen diameter. The pressure
gauge indicator can be read in kN, N, t, kg and bar.
The digital display continuously monitors applied
load and direct reading of the specimen diameter.
Unit is portable and accepts core specimens of up
to 4" (101.6mm) in diameter.
Point Load Tester HS-4157
Shipping wt. 33 lbs (15kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 71
AGGREGATE Rock Testing, Coatings

HP-1160

HP-1108

HCM-4000iHA

HCM-5070

Typical Hoek Cell Compression

Machine and Controller Setup

HS-4160

Hoek Cells Weight per Gallon Cup Falling Sand Abrasion Tester
Hoek cells are used to measure the strength of ASTM D244 ASTM D333, D968, D1395, D2205
cylindrical rock specimens, which are subjected to Weight per Gallon Cups are used to quickly and The falling sand test determines the abrasion
triaxial compression. They are comprise a steel accurately determine the weight per gallon, and resistance of coatings, such as paint, varnish,
body and two steel end caps, which are screwed also the specific gravity of paints, etc. Capacity of lacquer and related products. The test panel is
to the body of the cell when in use. The body has 83.2cc. Includes cover. enclosed in a receptacle with a window. Ottawa
two, self-sealing couplings; one of them is for Weight per Gallon Cup HP-1108 natural silica sand is considered the standard use in
connecting to the hydraulic pressure system, the Shipping wt. 0.5 lbs (0.2k this test because of its known characteristics. Order
other is for de-airing the cell chamber and the H-3820 Ottawa silica test sand separately.
attachment of a pressure measurement device. Falling Sand Abrasion Tester HP-1160
Four sizes are available. Shipping wt. 110 lbs (50kg)

Hoek Cell, 30mm HS-4159

Hoek Cell, 42mm HS-4160
Hoek Cell, 55mm HS-4161
Hoek Cell, 1.5" HS-4162
Shipping wt. 33 lbs (15kg)

Hoek Cell Membranes

Flexible membranes for use with Hoek Cells.
Hoek Cell Membrane, 30mm HS-4159.1
Hoek Cell Membrane, 42mm HS-4160.1
Hoek Cell Membrane, 55mm HS-4161.1
Hoek Cell Membrane, 1.5" HS-4162.1
Shipping wt. 36 lbs (16.5kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 SOIL-LAB
Atterberg Limits . . . . . . . . . . . . . 85-86 Permeability . . . . . . . . . . . . . . 89-93
CBR Load Frames . . . . . . . . . . . . 81-83 Plastic Limit . . . . . . . . . . . . . . . . 84
Compaction. . . . . . . . . . . . . . . 79-80 Processors, Soil . . . . . . . . . . . . . 74-75
Dispersion, Soil . . . . . . . . . . . . . 88-89 Sample Extraction . . . . . . . . . . . . . 76
Expansion . . . . . . . . . . . . . . . . 94 Sand Equivalent . . . . . . . . . . . . . . 87
Harvard Miniature . . . . . . . . . . . . . 84 Shrinkage Limit . . . . . . . . . . . . . . 84
Hydrometer Tests. . . . . . . . . . . . . . 88 Volume Change . . . . . . . . . . . . . . 94
Molds, Compaction . . . . . . . . . . . . . 77 Unconfined Soil Testing. . . . . . . . . . . . 84
Mold Accessories. . . . . . . . . . . . . . 78
74
Soil Processors SOIL-LAB

H-4197

H-4199

H-4215 H-4198

Rapid Soil Processor Replacement Screens for Rapid Soil Processor gized cranker. The material hopper provides 50in3
Processing soil for soil compaction tests has never (820ml) approximately 2lb (0.9kg) of material.
been easier than when using Humboldt's Rapid Description Model
Disk Grinding Mill, Hand-operated H-4197
Soil Processor. It automatically processes semi- Replacement Screen, 11.875 " Shipping wt. 12.5 lbs (5.7kg)
moist, moist and even samples close to optimum (302mm) height (for units sold H-4215.32
Description Model
moisture content to minus #4 screen size more after March, 1995)
than five times faster than any other method avail- Replacement Screen, 13" Wet grinding feeder and disk
H-4197.1
able. Samples of up to 30 pounds of fat and tough (330mm) height (Old Style, for H-4215.26 set
clays at field moisture levels can be processed in units sold before March, 1995)
Electric, Disk Grinding Mill
less than 15 minutes. For those drying back sam-
ples or taking up to 24hrs to prepare samples for Soil Grinder, Humboldt The H-4198 Electric Disk Grinding Mill is used in
five-point moisture/density relationship tests, the Prepares soil samples to designated particle size testing labs around the world and complies with
rapid soil processor can accomplish this prepara- for accurate, repeatable test results. Grinds one- ASTM C409 for sample preparation of Hardgrove
tion in about 5 hours. Other test preparations can pint sample in 15 seconds. Stainless steel construc- Grindability specimens. This grinding mill fea-
also benefit from the rapid soil processor, reduc- tion. Includes a No. 10 perforated stainless plate. tures a 1/3hp single-phase, geared motor, which
ing prep time to almost nothing. If you use field is mounted to a rigid, cast-aluminum base with
Soil Grinder, 120V 60Hz H-4199
expedient methods, such as "rapid compaction" Soil Grinder, 220V 50Hz H-4199.5F rubber feet for stability. The grinding mill head
or "family of curves" testing, the rapid soil proces- Shipping wt. 28 lbs (12.7kg) construction is made of sturdy, durable cast iron.
sor is a must. The grinding mill head can be easily removed and
Soil Grinder Accessories
disassembled for cleaning without the use of any
In addition, while processing a sample, rocks in special tools. The grinding plates are made of a
Description Model
the sample of up to 0.75" in size are automatically hard iron alloy designed for clog resistance and
separated from the soil, preventing damage to the No. 4 Perforated, SS Plate H-4199.A
long life. Plate-to-plate clearance is easily adjusted
screen. No. 10 Perforated, SS Plate H-4199.B by hand in order to change the mesh size range
The rapid soil processor features heavy-duty, No. 35 Perforated, SS Plate H-4199.C desired. Output capacity is up to 40lbs (18kg) per
all-metal construction, which provides years of hour with dry material and the material hopper
2mm Perforated, SS Plate H-4199.D
dependable service under constant use. The off- provides 50in3(820ml) approximately 2lb (0.9kg) of
Beater Assembly H-4199.7 material. Grinding mill is sold with the dry grinding
set rotating drum is motor driven and requires no
preset adjustments. Automatic operation frees up feeder and disk set— a wet grinding feeder and
technician’s time allowing them to do other tasks Disk Grinding Mill, Hand-operated disk set is available as an accessory. The complete
Hand-operated Grinding Mill mounts to bench top unit ships in two boxes.
while processing soil samples. Easy-to-install,
replacement screens are available, as are replace- up to 1.5" (38.1mm) thick with an integral c-clamp Soil Grinder, 120V 60Hz H-4198
for fast grinding of samples. The mill is made of Soil Grinder, 220V 60Hz H-4198.2F
ment parts. Overall dimensions: 32 x 36 x 53" (813
Soil Grinder, 220V 50Hz H-4198.5F
x 915 x 1346mm). sturdy, durable, painted cast iron. Mill head can be
Shipping wt. 55 lbs (25kg)
Rapid Soil Processor, 120V 60Hz H-4215 easily disassembled for cleaning without the use
Rapid Soil Processor, 220V 60Hz H-4215.2F of any special tools. The grinding plates are made Description Model
Rapid Soil Processor, 220V 50Hz H-4215.5F of a hard iron alloy designed for clog resistance
Wet grinding feeder and disk
Shipping wt. 406 lbs (184kg) and long life. Unit is sold with dry grinding feeder H-4198.1
set
and disk set, but wet grinding set up is available
as an accessory. Output capacity is up to 40lbs
(18kg) per hour with dry material and an ener-

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 75
SOIL-LAB Soil Processors

H-3839

H-3843A

H-3842A
HC-3851

H-4258
H-4257

Soil Mortar Laboratory Bench Mixer, 12Qt. positions. Includes stainless-steel bowl, flat-type
ASTM D421; AASHTO T87 The Hobart model HL-120 provides a larger 12 aluminum grid beater, whip and aluminum dough
Heavy porcelain mortar, glazed outside surface Qt. (11.4L) bowl for larger samples or busier labs. hook. Base dimension: 21" x 21.5" x 41.25" (533 x
and unglazed inside; for use with H-4258 pestle to It features a direct gear drive and a heavy-duty 546 x 1048cm).
break up soil particle aggregates for testing. Mor- 1/2hp motor to ensure constant mixing speeds Bench Mixer, 20Qt, 120V 60Hz H-3843A
tar is 3.5" (90mm) ID x 2.25" (57mm) H. under load. A locking hand-lever provides precise Bench Mixer, 20Qt, 230V 50/60Hz H-3843A.4F
Soil Mortar H-4257 raising and lowering of the mixing bowl. This mixer Shipping wt. 230 lbs (104kg)

Shipping wt. 1.5 lbs (0.7kg) thoroughly blends, mixes and aerates all ingredi- Soil and Mortar Mixer, 5L (5.3qt)
ents for a consistent, predictable finished batch. ASTM C305; AASHTO T162; EN 196
Soil Pestle
Selective agitator transmission has 3 fixed speed DIN 1164; BS 3892; ISO 679; NF P15-411
ASTM D421; AASHTO T87
settings and a stir speed, these are: 107, 198 and
Rubber-tipped 8" (203mm) long pestle, made for This excellent, alternative to the Hobart mixer fea-
365 and 59 RPM. Its 15-minute SmartTimer pro-
gently grinding soils without breaking individual tures two-speed, manual-control with a very robust
vides ease of use and consistency. Bowl Interlock
particles. design, expressly made for the efficient mixing of
ensures mixer bowl is properly in place for mixer to
Soil Pestle H-4258 cement pastes and mortar. The mixer offers two
operate and bowl lift is an ergonomic hand crank
Shipping wt. 0.7 lbs (0.32kg) speeds: 140 rpm for revolving with 62 rpm plane-
operated, which self-locks in the top and bottom
Mixer, 5-Qt. tary action and 285 rpm revolving with15 planetary
positions. Includes stainless-steel bowl, flat-type
Mixer for mixing material samples. The H-3839 action.
aluminum grid beater, whip and aluminum dough
operates on the principle of planetary action where This mixer features a heavy-duty design, which
hook. Base dimension: 14.75" x 20" x 29.6125"
the beater reaches every part of a batch, rotating provides excellent stability when placed on a
(375 x 508 x 750cm).
on its axis in opposite directions as it moves around counter top.
Bench Mixer, 12Qt, 120V 60Hz H-3842A
the bowl. This mixer thoroughly blends, mixes and Bench Mixer, 12Qt, 230V 50/60Hz H-3842A.4F Provides open mixing bowl for easy visual consis-
aerates all ingredients for a consistent, predictable Shipping wt. 185 lbs (84kg) tency control. Simple distance control between
finished batch. Selective agitator transmission has stirrer paddle and mixing bowl maintains standard
Laboratory Bench Mixer, 20Qt.
3 speed settings: 139, 285 and 591 RPM. Direct distance between bowl and stirrer.
The Hobart model HL-200 provides a large 20 Qt.
gear drive and a heavy-duty motor ensure constant Hoisting mechanism can also be used to lower the
(18.9L) bowl for larger samples or busier labs. It
mixing speeds under load. A locking hand-lever mixing bowl. Quick-clamping system allows mixing
features a direct gear drive and a heavy-duty 1/2hp
provides precise raising and lowering of the mix- bowl to be attached to the mixer easily. Provided
motor to ensure constant mixing speeds under
ing bowl. Base dimensions: 10.375 x 15" (264 x with standard stainless steel bowl and standard
load. A locking hand-lever provides precise raising
381mm). Height: 17" (432mm). The mixer includes beater.
and lowering of the mixing bowl. This mixer thor-
a stainless steel bowl, wire whip, dough hook and
oughly blends, mixes and aerates all ingredients Mortar Mixer, 5L (5.3qt), 120V 60Hz HC-3851
an aluminum flat beater. It is suggested that a
for a consistent, predictable finished batch. Selec- Mortar Mixer, 5L (5.3qt), 230V 60Hz HC-3851.2F
stainless steel beater or a Humboldt extreme-duty Ship wt. 125lbs. (56kg)
tive agitator transmission has 3 fixed speed set-
whisk be purchased for materials mixing applica-
tings and a stir speed, these are: 107, 198 and 365
tions for improved beater life.
and 59 RPM. Its 15-minute SmartTimer provides
Mixer, 5-Qt. (4.73L), 120V 60Hz H-3839 ease of use and consistency. Bowl Interlock ensures
Mixer, 5-Qt. (4.73L), 230V 60Hz H-3839.2F mixer bowl is properly in place for mixer to operate
Mixer, 5-Qt. (4.73L), 230V 50Hz H-3839.5F and bowl lift is an ergonomic hand crank operated,
Shipping wt. 55 lbs (25kg)
which self-locks in the top and bottom

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

76
Sample Extraction SOIL-LAB

H-4185

H-4155A
H-4185.RT

H-4150
H-4185.100
(shown with ejector,
not included)

Horizontal Sample Ejector Portable Stand for Horizontal Sample Ejector Sample Ejector, Motorized
Hydraulically driven horizontal sample ejector Sturdy, mobile stand accommodates H-4185 hor- Designed for lab and field use to extract soil sam-
designed for rapid ejection of 3" (76.2mm) x 30" izontal sample ejector. Complete with shelf for ples from 4" and 6" compaction molds, as well as
(762mm) thin-wall sample tubes (Shelby tubes). pneumatic pump and reservoir. Large wheels pro- 2" and 2.8" tube samples. This sample ejector fea-
The horizontal sample ejector provides a smooth vide easy maneuverability. Top allows sample ejec- tures the use of a 5-ton capacity, motorized hydrau-
and easily controlled piston stroke providing easy tor to be bolted to it for added stability. Requires lic pump and ram assembly. The unit incorporates
and rapid handling of ejected samples. The unit's longer hoses (included) to reach pump and reser- extended upright rods in order to accommodate
hydraulic system accurately controls the horizon- voir. Some assembly required. standard 4" and 6" compaction molds, as well as
tal piston's 5600lbf (24.9kN) force to eject sam- Portable Stand for Sample Ejector H-4185.100 2" and 2.8" sample tubes. Piston stroke is 9.25"
ples smoothly. The ejector uses 1.7gpm hydraulic Shipping wt. 170 lbs (77kg) (184mm). Overall dimensions, excluding pump,
pump powered by a 1hp electric motor. Hydraulic Sample Ejector, Hand-Operated 13"W x 6"D x 29"H (330 x 152 x 737mm).
oil reservoir provides 2.5gal (9.5L) capacity. Designed for lab and field use to extract soil sam- Sample Ejector, Motorized, 120V 60Hz H-4150
This ejector can also be used with 2 or 2.5" Shelby ples from 4" and 6" compaction molds, as well as Sample Ejector, Motorized, 220V 50/60Hz H-4150.4F
tube samples using the corresponding conver- Shipping wt. 90 lbs (40kg)
2" and 2.8" tube samples. The ejection force is
sion kit, see chart below. The ejector comes with generated by means of a 3-ton (27.7kN) capacity,
(1) sample trough to support ejected samples. hand-operated hydraulic jack. The cast-aluminum
Overall dimensions w/o sample trough are: 84" ejector head assembly can be positioned at differ-
(2134mm) L x 23" (584mm) W x 18" (457mm) H. ent heights through the use of quick release pins.
Horizontal Sample Ejector, 120V 60Hz H-4185 This enables the operator to easily match the ejec-
Horizontal Sample Ejector, 220V 60Hz H-4185.2F tion travel to the height of the mold being used.
Horizontal Sample Ejector, 220V 50Hz H-4185.5F Piston stroke is 8" (235mm). Overall dimensions
Shipping wt. 310 lbs (140kg) 13"W x 6"D x 27"H (330 x 152 x 686mm).
Sample Ejector, Hand-Operated H-4155A
Shipping wt. 56 lbs (25.5kg)
Accessories for H-4185
Sample Trough,
H-4185.RT
Round Bottom
Conversion Kit for 2"
H-4185.2
Sample Tube
Conversion Kit for 2.5"
H-4185.3
Sample Tube

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 77
SOIL-LAB Molds

H-4162 H-4161A
H-4141 H-4225
H-4151

H-4159 H-4163 H-4142

H-4149

Standard Proctor Compaction Mold, 4" Modified Proctor Mold, Split Design, 6" 2.5" detachable collar. Includes detachable base
ASTM D558, D559, D560, D698, D1557, D1558, ASTM D558, D559, D560, D698, D1557, D1558, plate (8" x 8" x 0.5" thick), studs and wing nuts.
AASHTO T99, T134, T135, T136, T180, T220 AASHTO T99, T134, T135, T136, T180, T220 Compatible with H-4169 compactor.
Soil mold used where a compacted sample is Mold volume of 1/13.33 ft3, cold-rolled steel tub- Compaction Mold, 6" H-4159
required, such as standard proctor density/mois- ing, plated for rust resistance. Includes detach- Shipping wt. 21 lbs (9.5kg)

ture tests. Mold volume is 1/30 ft3. Cold-rolled able base plate, studs and wing nuts. Mold has LBR Mold, 6"
steel tubing, plated for rust resistance. Mold vertical split in body with 2 quick-acting clamps FM 1-T 180, FM 5-515
dimensions are 4" ID x 4.584" H with a 2" detach- for easy removal of specimen. Mold dimensions Compaction mold with a volume of 1/13.33 ft3,
able collar. Includes detachable base plate, are 6" ID x 4.584" H with a 2" detachable collar. cold-rolled steel tubing, plated for rust resistance.
studs and wing nuts. Compatible with H-4169 Includes detachable base plate, studs and wing Mold dimensions are 6" ID x 6.1" H with a 2.5"
compactor. nuts. Compatible with H-4169 compactor. detachable collar. Collar extension and perfo-
Standard Proctor Compaction Mold, 4" H-4141 Modified Proctor Mold, Split Design, 6" H-4161A rated base plate can be clamped on either end
Shipping wt. 14 lbs (6.3kg) Shipping wt. 18.3 lbs (8.3kg) of cylinder. Compatible with H-4169 Compactor.
Standard Proctor Mold, Split Design, 4" CBR Mold with Perforated Base, 6" LBR test requires H-4147 spacer disc, sold sepa-
ASTM D558, D559, D560, D698, D1557, D1558, ASTM D1883; AASHTO T193 rately, see next page.
AASHTO T99, T134, T135, T136, T180, T220 CBR mold with a volume of .1145 ft3. Cold-rolled LBR Mold, 6" H-4163
3
Mold volume of 1/30 ft . Cold-rolled steel tub- steel tubing, plated for rust resistance. Collar Shipping wt. 22 lbs (10kg)

ing, plated for rust resistance. Includes detach- extension and perforated base plate can be Compaction Split Mold, 2.8"
able base plate, studs and wing nuts. Mold has clamped on either end of cylinder. Mold dimen- Compaction mold with a volume of .0214 ft 3.
vertical split in body with 2 quick-acting clamps sions are 6" ID x 7" H with a 2.5" detachable Cold-rolled steel tubing, plated for rust resis-
for easy removal of specimen. Mold dimensions collar. Includes detachable base plate, studs and tance. Mold dimensions are 2.8" ID x 4" H with
are 4" ID x 4.584" H with a 2" detachable collar. wing nuts. Compatible with H-4169 compactor. a 2" detachable collar. Mold has vertical-split
Includes detachable base plate, studs and wing CBR Mold with Perforated Base, 6" H-4151 body with 2 quick-acting clamps for easy removal
nuts. Compatible with H-4169 compactor. Shipping wt. 23.2 lbs (10.5kg) of specimen. Not compatible with H-4169
Standard Proctor Mold, Split-Design, 4" H-4225 CBR Mold with Solid Base, 6" compactor.
Shipping wt. 13 lbs (5.9kg) ASTM D1883; AASHTO T193 Compaction Split Mold, 2.8" H-4142
Modified Proctor Compaction Mold, 6" Shipping wt. 7.8 lbs (3.5kg)
CBR mold with a volume of .1145 ft3,. Cold-rolled
ASTM D558, D559, D560, D698, D1557, D1558, steel tubing, plated for rust resistance. Collar Compaction Mold, California 216
AASHTO T99, T134, T135, T136, T180, T220 extension and solid base plate can be clamped CA Method 216B
Soil mold used for modified proctor density/ on either end of cylinder. Mold dimensions are Compaction mold 16" ID x 2.875" H with a
Moisture tests. Mold volume of 1/13.33 ft3. Cold- 6" ID x 7" H with a 2" detachable collar. Includes 2.5" detachable collar. For use with H-4169.CA
rolled steel tubing, plated for rust resistance. detachable base plate, studs and wing nuts. Compactor.
Mold dimensions are" 6" ID x 4.584" H with a Compatible with H-4169 compactor. Compaction Mold, 6" H-4169.4CA
2" detachable collar. Includes detachable base CBR Mold with Solid Base, 6" H-4149 Shipping wt. 21 lbs (9.5kg)
plate, studs and wing nuts. Compatible with Shipping wt. 22 lbs (10kg)
H-4169 compactor. Compaction Mold, 6"
Modified Proctor Compaction Mold, 6" H-4162 ASTM D1883; AASHTO T193
Shipping wt. 19 lbs (8.6kg)
Compaction mold with a volume of 1/10th ft3,.
Cold-rolled steel tubing, plated for rust resis-
tance. Mold dimensions are 6" ID x 6.1" H with a

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

78
Mold Accessories SOIL-LAB

H-4172
H-4158
H-4158.1 H-4175
H-4174

H-4176
H-4177
H-4179 H-4153

H-4154FP

H-4154 H-4178BR
H-4147
H-4178
Cutting Edge Surcharge Weight, 5 lb. Spacer Disk LBR 6"
Machined from seamless tubing with a sharpened Used in the application of surcharged loads on For use with the H-4163 LBR mold. Compatible
edge to enable undisturbed samples to be taken the soil‘s surface during soaking and penetration. with H-4169 Compactor. Disk is used as a false
in the field. Cutting edge is plated for rust resis- Rust-resistant, plated annular disk weighs 5 lbs. bottom in a soil mold during the compaction
tance and has a 6" (152mm) ID and 2" (51mm) (2.3kg), 5.875" (149mm) OD with a 2.125" (54mm) process. Plated, rust-resistant steel disk is 1.416"
high. Recess in upper section allows edge to be ID hole in center. (36mm) high, 5-15/16" (152mm) dia.
mounted at either end of a H-4149 or H-4151 mold 5 lb. Surcharge Weight H-4175 Spacer Disc. LBR H-4147
to facilitate sample removal in the field. Ship wt. 5.7 lbs. (2.5kg) Ship wt. 12.2 lbs. (5.5kg)

Cutting Edge H-4174 Surcharge Weight, 10 lb. Filter Paper

Ship wt. 2 lbs. (0.9kg) 10 lb. (4.5kg) Field surcharge weight, made in two 100 pack of coarse grade filter paper used to
Swell Plate parts; 5.875" (149mm) OD; 2.125" (54mm) ID. separate spacer disc and soil in the CBR mold
Perforated 5.875" (149mm) dia. base with adjust- 10 lb. Surcharge Weight H-4177 during compaction operation, or over the top sur-
able stem. Contact end of the stem is easily locked Ship wt. 12 lbs. (5kg) face of the soil when the compaction operation is
in place with a knurled nut. completed.
Slotted Surcharge Weight, 5 lb.
Swell Plate H-4172 Used in the application of surcharged loads on Filter Paper H-4154FP
Ship wt. 5 lbs. (2.3kg) Ship wt. 0.3 lbs. (0.13kg)
the soil‘s surface during soaking and penetration.
Swell Tripod Attachment Rust-resistant, plated annular disk weighs 5 lbs. Filter Screen
Metal Tripod supports dial gauge for measuring (2.3kg), 5.875" (149mm) OD with a 2.125" (54mm) 100 mesh stainless screen is 5-15/16" (152mm) dia.
the amount of swell during soaking. Attachment is slot. Filter Screen H-4154
used with H-4172 swell plate. Order dial indicator 5 lb. Slotted Surcharge Weight H-4176 Ship wt. 0.1 lbs. (0.04kg)
separately. Ship wt. 6 lbs. (3kg) Dial Indicator Bracket
Swell Tripod Attachment H-4158 Slotted Surcharge Weight, 10 lb. Bracket used to attach a dial indicator to the pen-
Ship wt. 0.8 lbs. (0.3kg) 10 lb. (4.5kg) slotted, field surcharge weight, 8.5" etration piston.
Dial Indicator (216mm) dia. Dial Indicator Bracket H-4178BR
Dial indicator has 1.000" operating range, gradu- Slotted Surcharge Weight, 10 lb. H-4179 Ship wt. 0.8 lbs. (0.36kg)
ated in 0.001" divisions, clockwise movement and Ship wt. 11 lbs. (5kg)
Penetration Piston
revolution counter. Recommended for use with
Spacer Disk CBR penetration piston has 3 sq. in. (19.35cm2)
H-4158 tripod attachment.
Disk is used as a false bottom in a soil mold during base area and is about 7.5" (191mm) long.
Dial Indicator H-4158.1 the compaction process. Plated, rust-resistant steel Designed for use in conjunction with weights
Ship wt. 1.3 lbs. (0.5kg) disk is 2.416" (36mm) high, 5-15/16" (152mm) dia. H-4175 and H-4176 to apply penetration sur-
Spacer Disk H-4153 charge loads.
Ship wt. 20 lbs. (9kg) Penetration Piston H-4178
Ship wt. 7 lbs. (3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 79
SOIL-LAB Compaction

H-4169.100-B

H-4169.2415 H-4169.2416

Replacement Hammers, New Style

4" Round Hammer H-4169.2415
6" Pie-Shape Hammer H-4169.2416
Replacement Hammers, Old Style
4" Round Hammer H-4169.415
6" Pie-Shape Hammer H-4169.416
Hammers do not include weights. New Style Ham- H-4170B H-4160B H-4173
mers are only threaded in the middle of the shaft.
H-4169
Old Style Hammers are threaded almost to the
end of the shaft.

Mechanical Compactor, Automatic Mechanical Compactor Safety Cage Compaction Hammer, Manual, AASHTO
ASTM D558, D559, D560, D698, D1557; AASH- Cage provides protection from moving parts AASHTO T180
TO T99, T134, T135, T180 during compaction. Cage is hinged to allow access Manual, moisture/density hammer meets AASHTO
The mechanical compactor automatically com- to mold and hammer. specs. It incorporates a 10 lb (4.5kg) weight and
pacts and rotates mold after each blow while Mechanical Compactor Safety Cage H-4169.100-B a drop of 18" (457mm) with a 2" (51) face. Guide
keeping track of the number of hammer blows Shipping wt. 8 lbs (3.6kg) sleeve has four vent holes in each end of sleeve
and shutting off once a preset number of blows is California Mechanical Auto Compactor to release built-up air pressure. Machined steel,
reached. The start/stop function of the compac- Model complies with California method 216 and is plated for rust resistance. Features resilient rubber
tor is independent of the counter. The unit can be supplied with a 2" round 10 lb hammer and cor- ball handle.
used to perform standard or modified compac- responding piston and rod. Required split mold Compaction Hammer, Manual, AASHTO H-4170B
tion tests using a 5.5 lb. (2.5kg) hammer with 12" is available upon request. Use with H-4169.4CA Shipping wt. 15.6 lbs (7kg)
(305mm) height of drop or a 10 lb. (4.5kg) hammer Mold. Compaction Hammer, Manual, Corps of Engineers
with 18" (457mm) drop. Hammer lift compensates California Mechanical Auto Compactor H-4169.CA EM1110-1-1804
the height of the drop for soil thickness in the mold Shipping wt. 432 lbs (195kg)
Hammer incorporates a 5.5 lb (2.54kg) weight and
during compaction. Hammer weight is concen- Calibration Kit for Mechanical Compactor a drop of 12" (305mm) with a 2" (51) face. Ham-
trated at the foot, allowing free fall of the hammer. ASTM D2168 mer is guided on shaft. Length of drop is slightly
Hammer changes are made from in front of the
For use with H-4169 automatic mechanical com- adjustable. Foot assembly has recoil mechanism
compactor.
pactor. Calibration kit includes lead deformation to reduce impact fatigue on parts. Tamping face is
Included with the compactor are: (1) 5.5 lb (2.5kg) apparatus, micrometer and 50 lead calibration removable and replaceable.
hammer; (1) 10 lb. (4.5kg) pie-shaped hammer; (1) cylinders. Compaction Hammer, Manual, COE H-4173
hammer surcharge weight to convert hammers Calibration Kit for Mechanical Compactor H-4169CK Shipping wt. 11 lbs (4.9kg)
to 10lb (4.5kg); (1) hammer safety device; (1) 4" Shipping wt. 4.9 lbs (2.2kg) Compaction Hammer, 10lb, COE
(102mm) mold, and (1) 6" (152mm) mold. Overall
Compaction Hammer, Manual Manual, moisture/density hammer, which incor-
dimensions: 56"H x 16.5"W x 30"D (1422 x 419 x
ASTM D558, D698; AASHTO T99 porates a 10 lb (4.5kg) weight and a drop of 12"
762mm). Max. height in operation: 66" (1677mm).
Manual, moisture/density hammer meets ASTM (305mm) with a 2" (51) face.
Mechanical Compactor, 120V 60Hz H-4169
and AASHTO specs. It incorporates a 5.5 lb Compaction Hammer, 10lb, COE H-4171
Mechanical Compactor, 230V 50/60Hz H-4169.4F
(2.54kg) weight and a drop of 12" (305mm) with Shipping wt. 18 lbs (8.3kg)
Shipping wt. 387 lbs (175kg)
a 2" (51) face. Guide sleeve has four vent holes in
each end of sleeve to release built-up air pressure.
Machined steel, plated for rust resistance. Features
resilient rubber ball handle.
Compaction Hammer, Manual H-4160B
Shipping wt. 9.2 lbs (4.2kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

80
Compaction SOIL-LAB

H-4115.3
H-3759

H-3750.2F
H-3750.5F

H-3750FS
H-4115.3

H-4115.5

H-3753
H-3758 H-3757 H-4115
H-4115.4
3
Relative Density Apparatus Relative Density Mold Set, 0.5 ft for easily mounting a vibration hammer. A vibration
ASTM D4253, D4254 0.5 cu. ft. capacity mold set for use with relative hammer, which includes a 5.75" tamper and a 12"
Apparatus determines the relative density density apparatus. Mold set comes with detach- long mounting shank. The set also includes an 11"
of cohesionless, free-draining soils and pro- able guide sleeve and clamp assembly. Includes split, compaction mold. The vibrating hammer test
vides well-defined results on soils that do not surcharge base plate with removable handle method may be performed in the field or in the
respond well to conventional moisture-density and surcharge weight with handle. Mold is 11" laboratory.
impact compaction testing. Soils for which this (279.4mm) ID x 9.092" (230.9mm) H. Vibration Compaction Frame/Hammer Set H-4115
method is appropriate may contain up to 12 per- Relative Density Mold Set, 0.5 ft3 H-3758 Shipping wt. 368 lbs (167kg)
cent of soil particles passing a No. 200 (75μm) Shipping wt. 280 lbs (127kg)
Compaction Frame Only
sieve, depending on the distribution of parti- Pouring Funnel Set Mounting frame for compaction hammer set up.
cle sizes, which causes them to have free-drain- Used for filling loose .375" (9.5mm) or finer Does not include hammer or mold.
ing characteristics. Relative density of cohesion soils into relative density mold. Includes two 6"
Compaction Frame H-4115.2
less soils uses vibratory compaction to obtain (152mm) dia. x 12" (305mm) long metal cylinders, Shipping wt. 269 lbs (122kg)
maximum density and pouring to obtain minimum each with a integral funnel at the end. Orifices are
Vibration Compaction Hammer with Tamper
density. Complete set includes: vibrating table 1" (25.4mm and 0.5" (12.7mm).
ASTM D7382-08
H-3756.2F, relative density mold sets H-3757 and Pouring Funnel Set H-3750FS
H-3758 and relative density gauge set H-3759. Shipping wt. 25 lbs (11kg) Includes hammer, 5.75" (146mm) Tamper and 12"
Both models are 12 amps 1ph AC. (305mm) long mounting shank.
Gauge Set, Relative Density
Relative Density Apparatus, 230V 60Hz H-3750.2F Gauge set for use with relative density molds. Compaction Hammer with Tamper H-4115.3
Relative Density Apparatus, 230V 50Hz H-3750.5F Shipping wt. 35 lbs (15.8kg)
Designed to fit guide brackets of either the H-3757
Shipping wt. 925 lbs (420kg) or H-3758 mold sets. Set includes a 2" (50.8mm) Compaction Molds
Vibrating Table with Controller dia., 2.0 x 0.001" mechanical dial gauge. A metal, ASTM D7382-08
Vibrating table for use with the relative density 3 x 12 x .125" (76 x 305 x 3.2mm), calibration bar Split compaction molds for use with vibration com-
mold sets or other processes requiring vibratory is also included. paction mold set.
compaction. Table is 30" x 30" (762 x 762mm), and
Gauge Set, Relative Density H-3759 11-Inch Compaction Mold H-4115.4
vibration is provided by an electromagnetic vibra-
Shipping wt. 8 lbs (4kg)
tor rated above 100lbs (45.5kg). Capacity for table 6-Inch Compaction Mold H-4161A
Vibration Indicator, Tachometer Type Shipping wt. 60 lbs (27kg)
is 750 lbs (341kg) and height is 21" (533mm).
Precision, pen-sized tachometer provides accurate Tamper for Compaction Hammer
Vibrating Table/Controller, 230V 60Hz H-3756.2F
readings even on hard-to-reach equipment. Scale ASTM D7382-08
Vibrating Table/Controller, 230V 50Hz H-3756.5F
gives readings from 2,000 to 21,000.
Shipping wt. 605 lbs (275kg) Replacement tamper and foot for compaction
Vibration Indicator, Tachometer Type H-3753
Relative Density Mold Set, 0.1 ft3 hammer.
Shipping wt. 0.5 lbs (0.2kg)
0.1 cu. ft. capacity mold set for use with relative Tamper and Foot H-4115.5
density apparatus. Mold set comes with detach- Vibration Compaction Frame and Hammer Set Shipping wt. 14 lbs (6kg)
able guide sleeve and clamp assembly. Includes ASTM D7382-08
surcharge base plate with removable handle Vibration compaction set used to compact soil
and surcharge weight with handle. Mold is 6" samples for use in tests referencing ASTM D7382-
(152.4mm) ID x 6.112" (155.2mm) H. 08 methods. This method refers to the determi-
Relative Density Mold Set, 0.1 ft3 H-3757 nation of the maximum dry unit weight and water
Shipping wt. 103 lbs (46kg) content range for the effective compaction of gran-
ular soils using a vibrating hammer. The test set
includes a heavy-duty frame designed specifically

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 81
SOIL-LAB Load Frames, CBR

The California Bearing Ratio (CBR) test was devel- NEXT CBR/LBR Software Module
oped by The California state highway department ASTM D1883; AASHTO T193; BS 1377 Part 4
and is widely used to determine the resistance Humboldt's NEXT software is used to control the
strength of sub-grade and sub-base materials. The operation of Humboldt's testing machines, as well
test is basically a simple penetration test using a as provide data acquisition and reporting of test
load frame and a standard, compacted CBR test data. The software provides a computer-based
mold of the material to be tested. The results of the platform with the ability to configure testing
test are then compared and evaluated to known machines and the testing process; calibrate trans-
standards already established for the material ducers, load cells and digital indicators; specify
being tested. testing parameters and limits, operate the machine
LBR or lime-rock bearing ratio is a variation of the during the testing and provide detailed reports of
CBR test. Developed primarily in Florida, it is used the data collected in tabular or graphical formats.
on materials with a high lime content. Humboldt From controlling a single operation to a complete
offers several CBR/LBR testing solutions based on geotechnical lab, Humboldt's NEXT data acquisi-
your overall testing needs and budget, from the tion software, in conjunction with compatible Hum-
advanced HM-5030.3F load frame with computer boldt testing equipment, provides a complete
interface using our NEXT software to a simple, solution for the acquisition, recording and pre-
hand-operated H-4156 load frame suitable for lab sentation of test data. NEXT software is included
or field use. with many of Humboldt's load frames, consolida-
Humboldt MasterLoader CBR/LBR Solution tion and direct shear machines; providing robust
ASTM D1883; AASHTO T193; BS 1377 Part 4 machine control, calibration, data acquisition and
Designed for applications requiring multi-purpose report generation for those using a computer to
loading systems, such as road construction projects control load frame operations.
in either mobile or fixed labs, educational institu- • test-specific setup, which guides you through
tions and consulting firms, the HM-5030 Master the process and includes selecting data collection
Loader is ideal for just about any application from parameters that best fit the specific test
road construction to high-volume commercial and
• input specific project information for each test,
educational laboratories.
such as project name, client information, etc
While the HM-5030 has been specifically designed
HM-5030.3F (sold as a load • all test-specific initial, intermediate, and final
for soil testing labs conducting multiple testing
frame only, shown with typical parameters required by ASTM and BS standards
CBR setup, see below) operations including: UU, CU and CD triaxial, UC,
are dynamically calculated for you, based on
CBR and LBR, it is also perfect for running Mar-
your input of specimen information, such as size,
Typical CBR/LBR Setup for HM-5030.3F shall, Hveem, TSR and SCB asphalt tests as well. Its
weight, etc
heavy-duty design and precise stepper-motor con-
Part # Description • tabulated test data, graphs and all test-specific
trol provide a stable platform for years of reliable
HM-2300.100 (1) S-type load cell, 10,000lbf (50kN) calculations are provided in real time, allowing
service allowing the HM-5030 to perform any tests
you to monitor tests in process
HM-2310.10 (1) Strain Transducer, 1" (25mm) required up to its load capacity of 11000 lbf (50kN).
• generate test-specific reports that include all
H-4178 (1) Penetration piston with stud Like all Elite Series load frames, the HM-5030 is
graphs and data presented in a project
built around Humboldt's integral, 4-channel data
HM-4178BRT (1) Displacement transducer bracket NEXT CBR/LBR Software Module HM-5001SW
logger with touch-screen control, which allows
HM-5001SW (1) CBR/LBR reporting software the load frame to be used as a standalone device Download

capable of full test control and data logging. It can See page 100-101 for more information on
See pages 118-121 for more information on
also be controlled by a networked computer at any Humboldt's NEXT Software.
the HM-5030 Master Loader and its Stand-alone
location with access to the network.
and Computer-controlled capabilities
MasterLoader, 110/220V 50/60 Hz HM-5030.3F
Shipping wt. 300 lbs (136kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

82
Load Frames, CBR SOIL-LAB

HM-5170.3F
HM-5
HM-5150.3F HM-2850.3F

the test is running. Data can then be viewed simul-

taneously or downloaded later to a computer in
the lab, in the next room or at a different location,
Typical CBR/LBR Setup: HM-5150.3F and HM-5170.3
while also providing report generation capabilities
CBR/LBR Specific Automatic Load Frame Part # Description
from within Humboldt's NEXT software enhanced
ASTM D1883; AASHTO T193; BS 1377 Part 4
CBR and LBR-specific software module. HM-2300.100 (1) S-type load cell, 11,000lbf (50kN)
The HM-5150 Loader has been specifically
The HM-5150 is sold as a load frame only. HM-2305.10 (1) Strain Transducer, 1" (25mm)
designed to handle CBR and LBR applications. Its
CBR/LBR Auto Load Frame, 110/220V 50/60 Hz HM-5150.3F
heavy-duty design and precise stepper-motor con- H-4178 (1) Penetration piston with stud
Shipping wt. 258 lbs (117kg)
trol provide a stable platform for years of reliable HM-2305BRT (1) Displacement transducer bracket
service. From educational institutions and con- CBR/LBR and Marshall Automatic Load Frame
ASTM D1883; AASHTO T193; BS 1377 Part 4 HM-5001SW (1) NEXT CBR/LBR software module
sulting firms to high-volume commercial labs and
construction projects, the CBR and LBR Loader can Load frame for those who do CBR soil testing and Multi-Speed Load Frame
handle these applications with ease. Marshall asphalt testing in their lab. The HM-5170 ASTM: D1883, D2850, D2166, D4767, D5581 and
The HM-5150 is built around Humboldt's integral, does both operations and has the same speci- D6927 AASHTO: T193, T296, T297, T208, T245,
data logger with touch-screen control, which allows fications as the HM-5150, except that it also has and T246; BS 1377: Part 4: 1990, BS 1377: Part 7:
the load frame to be used as a standalone device a Marshall-specific speed range. The HM-5170 is 1990, BS 1377: Part 8: 1990, BS 598: Part 107
capable of full test control and data logging. It can built around Humboldt's integral, data logger with
The HM-2850 Multi-speed Load Frame is
also be controlled by a networked computer at any touch-screen control, which allows the load frame
designed for those who want a high-quality, but
location with access to the network. to be used as a standalone device capable of full
simple, multi-purpose load frame without built-in
test control and data logging. It can also be con-
The HM-5150 is sold as a load frame only. For data acquisition capabilities. The HM-2850 is ideal
trolled by a networked computer at any location
CBR or LBR testing it is recommended that you for applications where the operator is either not
with access to the network. Its heavy-duty design
purchase the following items: a HM-2300.100 concerned with data acquisition; or, already has
and precise stepper-motor control provide a stable
S-type, 11,000 lbf (50kN) load cell, a HM-2305.10 or is planning to construct their own data acqui-
platform for years of reliable service.
1" (25mm) strain transducer, a H-4178 Penetration sition system. With its large 7" color, touchscreen,
piston with stud, a HM-2305BRT Displacement The HM-5170 is sold as a load frame only. the HM-2850 provides the operator with the abil-
transducer bracket and the HM-5001SW Next CBR/LBR/ Marshall Frame, 110/220V 50/60 Hz HM-5170.3F ity to precisely select any speed with five decimal
test-specific CBR/LBR software module. Shipping wt. 258 lbs (117kg) accuracy within the machine’s speed range.
Humboldt's Next software and the optional Specifications for HM-5150.3F and HM-5170.3F The HM-2850 features a quiet, direct drive, step-
HM-5001SW test-specific CBR/LBR software mod- Part # Description per motor that provides a range of loading speeds
ule provide robust machine control, calibration, Load Capacity 11000 lbf (50kN) from 0.00001 to 2.00000 (0.00001 to 50.80000
data acquisition and report generation for those mm/min). This speed range is more than adequate
Both Machines: 0.05 in/min
using a computer to control load frame operations. (1.27mm/min) and 1.00 mm/min for the majority of standard soil tests. The HM-2850
In stand-alone mode, the HM-5150 load frame Speed Range can also be used for asphalt Marshall and TSR test-
HM-5170.3F ONLY:
provides a 7" (178mm) touch-screen controller. 2 in/min. (50.8mm/min.) ing and features a rapid travel speed of 2/25 in/
These new waterproof, touch screens provide col- min. for moving the platen into position quickly.
Data Channels 2
orful, at-a-glance monitoring of testing functions The HM-2850 is sold as a load frame only.
without the use of a computer. Operators can see 1000 tests and up to
Data Storage Multi-Speed Load Frame, 110/220V 50/60 Hz HM-2850.3F
3000 readings per test
all the data in several formats at the machine while Shipping wt. 258 lbs (117kg)
Platen Size Travel 8" (203mm) / 4" (100mm)
27" (686mm) Vertical
Clearance
11" (279mm) Horizontal

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 83
SOIL-LAB Load Frames, CBR

H-4156MA

H-4156

H-4152
Specifications for HM-2850.3F CBR Setup included with H-4156MA CBR Mechanical Test Set
Part # Description Part # Description ASTM D1883; AASHTO T193

H-4156MA (1) CBR-specific load frame Complete mechanical test set used for CBR test-
Load Capacity 11000 lbf (50kN)
ing. Includes a complete complement of test
0.05 to 2.00000 inch/min H-4454.100 (1) Load ring, 10,000lbf (50kN)
Speed Range equipment for performing CBR testing. The test
.00000-50.800000 mm/min H-4158.1 (1) Dial gauge 1.000" x .001" set features the H-4156 loading press (load frame),
Platen Size [Travel] 8" (203mm) [4" (100mm)] H-4178 (1) Penetration piston with stud which uses a two-position mechanical jack to pro-
32" (812mm) Vertical vide steady test speeds, as well as rapid travel of
Clearance H-4178BR (1) Dial indicator bracket
11" (279mm) Horizontal the platen for positioning of the sample. The press,
includes a H-4454.100, 11,000lbf (48.8kN) cali-
9 Amps @ 125V CBR Mechanical Loading Press
Current brated load ring, a H-4178, 1.95" (49.5mm) dia. (3
4.5 Amps @ 250V ASTM D1883; AASHTO T193 in2 area) penetration piston, a H-4158.1, 1.000" x
17 x 22 x 51" The H-4156 loading press (load frame) uses a .001, dial indicator and a H-4178BR dial indicator
Dimensions
(432 x 559 x 1295mm) two-position mechanical jack to provide steady bracket, Overall dimensions: 18" x 12" x 34" (45.8
test speeds, as well as rapid travel of the platen x 30.5 x 86.4cm). The CBR test set includes:
Typical CBR Setup for HM-2850.3F
for positioning of the sample. The press, includes
Part # Description Part # Description
a H-4454.100, 11,000lbf (48.8kN) calibrated load
H-4454.100 (1) Load ring, 11,000lbf (50kN) ring, a H-4178, 1.95" (49.5mm) dia. (3 in2 area) H-4156 (1) Mechanical loading press

H-4158.1 (1) Dial gauge 1.000" x .001" penetration piston, a H-4158.1, 1.000" x .001, dial H-4151 (4) Mold
indicator and a H-4178BR dial indicator bracket,
H-4178 (1) Penetration piston with stud H-4153 (1) Spacer disk
Overall dimensions: 18" x 12" x 34" (45.8 x 30.5
H-4178BR (1) Dial indicator bracket x 86.4cm). H-4154 (4) Filter screens

CBR Mechanical Loading Press H-4156 H-4172 (2) Swell plates

CBR/LBR Specific Load Frame Ship wt. 132lbs. (60kg) H-4158 (1) Tripod attachment
ASTM D1883; AASHTO T193; BS 1377 Part 4
Mechanical, Two-Speed Loading Jack H-4175 (4) Surcharge weights
The H-4156MA load frame has been designed as Mechanical, two-speed loading jack used in the
a low-cost solution to doing CBR testing. It fea- H-4176 (4) Slotted surcharge weights
H-4156 and H-4156M loading presses.
tures one-speed operation with a preset speed H-4170A (1) Density hammer
Mechanical, Two-Speed Loading Jack H-4156J
specifically for CBR tests. The CBR speed is set Ship wt. 42lbs. (19kg) H-4144.12 (1) Straight edge, 12-inch
at 0.050 inches/minute (1.27 mm/minute), ASTM
H-4174 (1) Cutting edge
D1883. Maximum piston travel is 3.5" (88mm). The
H-4156MA is sold as a set with items in above chart
included with load frame. Overall dimensions are: CBR Mechanical Test Set H-4152
Ship wt. 379lbs. (172kg)
18 x 18 x 38.5"H (457 x 457 x 978mm).
CBR/LBR Load Frame, 120V 60Hz H-4156MA
CBR/LBR Load Frame, 220V 60Hz H-4156MA.2F
CBR/LBR Load Frame, 220V 50Hz H-4156MA.5F
Ship wt. 265lbs. (120kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

84
Classifier, Plastic, Shrinkage SOIL-LAB

H-4165

H-4180A

H-4254

H-4262

H-4253
H-4180BD H-4180D
H-4 H-4262P
HM-4501
Unconfined Soil Testers (17kg), and 40 lb. (18.2kg) spring and operating Adhesive Paper
These Unconfined soil testers allow for quick and instructions. Mold is machined from seamless tub- Pad of 50 sheets of special adhesive backed paper
accurate determination of unconfined compres- ing. Unit weight in pounds per ft3 m3 and the net for plastic limit.
sive strength of cohesive soils in the field or lab. weight of a compacted specimen in grams are fig- Adhesive Paper H-4262P
The H-4180B and the digital H-4180BD Testers are uratively equal. Shipping wt. 0.5 lbs (0.2kg)
designed to be a replacement for the now defunct Plastic Limit Set
H-4165 Individual Components
“Rimac” tester. They can be used for on-site pile ASTM D4318; AASHTO T90
tonnage or foundation bearing capacity esti- Mold assembly H-4165.15
Includes all apparatus recommended to perform
mates. The light and compact design of these Tamper assembly H-4165.16
plastic limit test in accordance with specifications.
testers provide great portability for everyday field Spring, 20 lb. H-4165.20 Set includes the following: (1) H-4253.1 plastic limit
use. The digital model features a quality digital
Spring, 37.5 lb. H-4165.375 plate, 12 x 12 x .375" (305 x 305 x 9.5mm) thick;
indicator, which provides readings to 1.0lb preci-
Spring, 40 lb. H-4165.40 (1) H-4930.250 mixing dish; (1) H-4904 spatula; (1)
sion. The load ring readout of the H-4180A and
H-4915.025 graduated cylinder, and (1) H-1350.3A
H-4180B provide fast and easy-to-read direct load
Harvard Miniature Compaction Apparatus H-4165 Pkg. of 48 sample cans All components are also
values in pounds. All of these testers are sturdily Shipping wt. 28 lbs (12.6kg) available individually.
made of light and durable aluminum and feature
Shrinkage Limit Set Plastic Limit Set H-4253
a geared, hand-wheel loading system. All include
Apparatus recommended to perform shrinkage Shipping wt. 11 lbs (5kg)
a load ring and a wide 4" platen. The H-4180B and
limit test in accordance with specifications. Set Calcium Carbonate Content Chamber
H-4180A feature an adjustable height scale, while
includes: (1) H-4256 monel shrinkage dish; (1) This test method covers the quantitative determi-
the H-4180D features a dial indicator to determine
H-4930.250 mixing dish; (1) H-4254C crystalliz- nation of the calcium carbonate (CaCO3) content
vertical travel. The H-4180D is supplied with a cal-
ing dish; (1) H-4255A shrinkage prong plate, (1) of soils. It is a gasometric method that utilizes a
ibration chart for precise measurement readings.
H-4256 shrinkage dish, and (1) H-4915.025 grad- simple portable apparatus. The test method is
Unconfined Soil Tester, 300lb (1.33kN) H-4180B
uated cylinder All components are also available quickly performed for soils containing calcium
Digital Unconfined Soil Tester, 300lb (1.33kN) H-4180BD
Unconfined Soil Tester, 500lb (2.22kN) H-4180A individually. carbonate. The acrylic chamber is 2.5" ID x 5.5"
Unconfined Soil Tester, 1000lb (4.45kN) H-4180D Shrinkage Limit Set H-4254 long and sealed with anodized end caps. The unit
Shipping wt. 18 lbs (8.2kg) Shipping wt. 3 lbs (1.3kg) comes complete with 10psi test gauge, bleed
Harvard Miniature Compaction Apparatus Plastic Limit Roller valve and a 20ml cup with handle.
Used for moisture density tests using small sam- ASTM D4318; AASHTO T90; TX DOT 105-E Calcium Carbonate Content Chamber HM-4501
Shipping wt. 6.1 lbs (2.7kg)
ples, its compaction action duplicates the knead- Easily repeatable mechanical technique produces
ing action of a sheepsfoot roller. Mold is 1.2625" consistent test results and saves time. Includes
(33mm) ID by 2.816" (71mm) H. Unit is designed integral top plate/handle, one (H-4262P) pad of 50
so collar remover and specimen ejector are consol- sheets of special adhesive backed paper to cover
idated into one piece. Set includes specimen ejec- contact surfaces (paper will not introduce fibers
tor, collar remover with spacer plate, mold holder, into soil samples), and instructions. Rigid acrylic 8 x
1/454 ft3 (129m3) volume mold and collar, compac- 4.5 x 1.25" (203 x 114 x 32mm).
tion tamper with 20 lb. (9.07kg), 37.5 lb. Plastic Limit Roller H-4262
Shipping wt. 3 lbs (1.3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 85
SOIL-LAB Atterberg Limits

H-4230

H-4228

H-4229

H-4234, H-4235 H-4229P

H-1350.3A
H-4226

Atterberg Limits (Liquid Limit Testing) ASTM Liquid Limit Machine with Counter
Liquid limit testing determines the water content at ASTM D4318; AASHTO T89, T90
H-4232
which soil changes from a liquid to a plastic state. Hand-operated liquid limit machine features
It is determined using the devices on this page. To mechanical revolution counter attached to the
perform, a soil sample is placed into the cup of the shaft to register the number of drops in the liquid
liquid limit machine and separated into two halves limit cup. Includes H-4229 ASTM grooving tool
using a grooving tool. The crank on the machine and gauge block. Crank can be shifted for left or H-4222D
is then rotated so that the cup holding the sam- right-hand operation.
ple strikes the base of the test machine. The num-
ASTM Liquid Limit Machine with Counter H-4228
ber of blows is recorded until the two halves flow Shipping wt. 6 lbs (2.7kg) H-4233
together and close the groove. (shown with
ASTM Liquid Limit Machine, Motorized base, not
ASTM Liquid Limit Test Set included)
ASTM D4318; AASHTO T89, T90 H-4915.025
ASTM D4318; AASHTO T89, T90
Motorized liquid limit machine gives uniform test-
Recommended for performing liquid limit test in ing with greater degree of accuracy. Unit is com-
accordance with ASTM specifications. Includes Accessories
prised of H-4230 ASTM liquid limit machine with
1 ea. of: H-4230 ASTM liquid limit machine, ASTM metal grooving tool
geared motor to give proper operating speed and H-4229
H-4930.250 mixing dish, H-4904 spatula, and gauge block
automatic counter. Machine is attached to metal
H-4915.025 graduated cylinder and a H-1350.3A ASTM plastic grooving
plate with rubber feet. Includes H-4229 ASTM
48 sample cans pack. H-4229P
grooving tool and gauge block. tools (10 pk)
ASTM Liquid Limit Test Set H-4234 Liquid Limit Machine, 120V 60Hz H-4226 AASHTO liquid limit metal
Shipping wt. 11 lbs (5kg) H-4232
Liquid Limit Machine, 220V 50Hz H-4226.5F grooving tool
ASTM Liquid Limit Test Set with Counter Shipping wt. 14 lbs (6.4kg)
Mixing dish H-4930.250
ASTM D4318; AASHTO T89, T90 Resiliency Tester
Spatula H-4904
Same set as above except it has machine with ASTM D4318; AASHTO T89, T90
counter. Includes 1 ea. of: H-4228 ASTM liquid Used to test resiliency of hard rubber base of liquid Graduated cylinder (25ml) H-4915.025
limit machine, H-4930.250 mixing dish, H-4904 limit machines, which should be done at 90-day Sample cans, 2.5 oz. (48 pk.) H-1350.3A
spatula, H-4915.025 graduated cylinder and a intervals to ensure base is in compliance with
H-1350.3A 48 sample cans pack. ASTM D4318 standard. . Replacement Parts
ASTM Liquid Limit Test Set w/ Counter H-4235 Resiliency Tester H-4233
Shipping wt. 15 lbs (7kg) Brass cup w/ screws for
Shipping wt. 1.2 lbs (0.5kg) H-4231
liquid limit machines
ASTM Liquid Limit Machine Durometer (D Scale)
ASTM D4318; AASHTO T89, T90 Brass cup w/ screws and
ASTM D4318, D2240; AASHTO T89, T90 H-4231.1
cam follower
Unit consists of brass cup, cam mechanism, car- As required by ASTM D4318, a durometer is used
riage and crank mounted on a hard rubber base. to test the hardness of the base of a liquid limit Stainless steel cup w/ screws
H-4231.2
Includes H-4229 ASTM grooving tool and gauge machine. Sealed springs maintain load deflection (non ASTM)
block. Crank can be shifted to right- or left-hand rate to a tolerance of .0004". Other models are Base H-4230.1
operation. also available, see page 332.
ASTM Liquid Limit Machine H-4230 Durometer (D Scale) H-4222D
Shipping wt. 5.5 lbs (2.5kg) Shipping wt. 1.7 lbs (0.7kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

86
Atterberg Limits SOIL-LAB

H-4236

H-4237

H-5236
H-5237

Cone Penetrometer (Liquid Limit Testing) Cone Penetrometer, Digital, Semi-Automatic Cone Penetrometer, Semi-Automatic
The cone penetrometer test method for liquid limit BS 1337-2, NF P94-052,1; CEN ISO/TS 17892 BS 1337-2, NF P94-052,1; CEN ISO/TS 17892
is based on the relationship between the moisture The H-5237 semi-automatic cone penetrometer The H-4237 semi-automatic cone penetrome-
content and the penetration of a cone into a soil is equipped with a magnetic controller device ter with dial indicator is equipped with the same
sample. This method eliminates test results depen- with an electronic, digital, programmable timer magnetic controller device as the digital version,
dent upon operator skills and provides a visual that automatically releases the plunger head and H-4237A. Its electronic, digital, programmable
measurement of penetration. Two cone penetrom- ensures free falling of the cone during the five sec- timer automatically releases the plunger head and
eter models are available. One, a manual opera- ond test. The digital readout provides readings ensures a free-falling cone during the five second
tion model, and the other an automatic model, in 0.1mm resolution in either mm or inches. The test. Overall dimensions are: 8.6" x 6.7" x 16.1"
which releases the cone for a set amount of time chromed support rod features micro-metric vertical (220 x 170 x 410mm)
and then locks the movement of the cone, regis- displacement for accurate positioning with a brass Cone Penetrometer, 120V 60Hz H-4237
tering the result. slider that provides smooth free fall, a stop and Cone Penetrometer, 220V 50Hz H-4237.5F
Cone Penetrometer, Digital release button and an automatic zero set. Includes Shipping wt. 25 lbs (11.3kg)
BS 1337-2, NF P94-052,1; CEN ISO/TS 17892 a stainless steel penetration test cone: 35mm long
The H-5236 digital cone penetrometer features with a 30° angle, weighing 20g. Two brass cups Accessories / Replacement Parts
an aluminum base with leveling screws and a spirit are included (55 x 35mm and 70 x 45mm) This Test cone, 35mm long,
cone penetrometer can also be used to measure H-4236.1
level for maintaining a level testing position. The 30° angle
digital readout provides readings in 0.1mm resolu- the shear undrained strength of undisturbed and
Test cone, 60° angle
tion in either mm or inches. The chromed support reconstituted soil samples per CEN ISO/TS 17892- H-4236.5
w/ 60g weight
rod features micro-metric vertical displacement 06. Overall dimensions are: 8.6" x 6.7" x 16.1" (220
x 170 x 410mm) Sample cup, brass,
for accurate positioning with a brass slider that H-4236.2
70 x 45mm
provides smooth free fall, a stop and release but- Cone Penetrometer, Digital Semi-Auto
ton and an automatic zero set. Includes a stainless 120V 60Hz H-5237 Sample cup, brass,
H-4236.3
steel penetration test cone: 35mm long with a 30° 230V 50Hz H-5237.5F 55 x 35mm
angle, weighing 20g. Two brass cups are included Shipping wt. 33 lbs (15kg)
Weight, 20g H-4236.4
(55 x 35mm and 70 x 45mm) This cone pene- Cone Penetrometer, Dial Indicator
Weight, 320g (shear strength
trometer can also be used to measure the shear BS 1337-2, NF P94-052,1; CEN ISO/TS 17892 H-4236.6
for 400g total weight)
undrained strength of undisturbed and recon- The H-4236 cone penetrometer with dial indicator
stituted soil samples per CEN ISO/TS 17892-06. Test gauge, 30° angle
features a 6" (150mm) diameter dial gauge, which H-4236.7
Overall dimensions are: 8.6" x 6.7" x 16.1" (220 x (cone point check)
is easily readable and is graduated in 0.1mm divi-
170 x 410mm) sions. Overall dimensions are: 8.6" x 6.7" x 16.1" Test gauge, 60° angle
H-4236.8
Cone Penetrometer, Digital H-5236 (220 x 170 x 410mm) (cone point check)
Shipping wt. 19 lbs (8.6kg) Mirror (for height adjustment) H-4236.9
Cone Penetrometer, Dial Indicator H-4236
Shipping wt. 21.6 lbs (9.8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 87
SOIL-LAB Sand Equivalent

H-4340

H-4379
(shown with
H-4374.C cover)

H-4342

H-4374
HM-3930

H-4378
Sand Equivalent Testing Sand Equivalent Test Set
Sand equivalent tests serve as rapid field-correla- ASTM D2419; AASHTO T176
tion tests to show relative proportions of clay-like The Humboldt sand equivalent test set includes all
or plastic fines and dusts in granular soils and fine items required to perform a sand equivalent test H-4342.2
aggregates. The test separates sand and clay, a except for a shaker. Be sure to choose a shaker
comparative reading is determined between the from those offered on this page. These test sets Cover for Sand Equivalent Shaker
suspended clay and the settled sand in the mea- include: Clear acrylic cover encloses the sand equivalent
suring cylinder. Tests may be done in the labora-
shaker for safer operation. The cover swings back
tory or the field. Components
out of the way for loading.
Sand Equivalent Shaker, Digital Timer Measuring cylinder, plastic H-4340.1
Cover for Sand Equivalent Shaker H-4374.C
ASTM D2419; AASHTO T176 Rubber stopper H-4340.5 Shipping wt. 8 lbs (3.7kg)
Motorized sand equivalent shaker features a dig-
Irrigator tube H-4340.2.6 Sand Equivalent Stock Solution
ital timer, which can be set from 0 to 60 minutes ASTM D2419; AASHTO T176
with automatic shutoff. It features an easy-to- Weighted foot assembly H-4340.3
Standard stock solution, made from anhydrous
use digital interface with an accuracy of 0.5%. Siphon assembly H-4340.2
calcium chloride, glycerin and formaldehyde. Use
to increase accuracy and ease of operation. It is Wide-mouth funnel H-4340.4 diluted with distilled water in ratio of 85ml solution
recommended for samples in the laboratory. The
Measuring can H-1350.3SP per/gal. distilled water.
consistent, repeatable oscillation of the appara-
tus eliminates operator-caused variation. Shaking Standard stock solution H-4342 Sand Equivalent Stock Solution, 8oz (.24L) H-4342
Sand Equivalent Stock Solution, 1G (3.8L) H-4342.2
operation delivers an 8" (203mm) stroke at a speed
Shipping wt. 0.8 lbs (0.36kg)
of 175 ±2 strokes per minute. Dimensions: 12" x
Sand Equivalent Test Set with Case H-4340 Pin Hole Dispersion Apparatus
24" x 24"H (31 x 61 x 61cm). Sand Equivalent Test Set without Case H-4341
ASTM D4647
Sand Equivalent Shaker, 120V 60Hz H-4379 Shipping wt. 25.1 lbs (11kg)
Sand Equivalent Shaker, 220V 50Hz H-4379.5F This test is used for evaluating clay soils for erod-
Sand Equivalent Shaker, Manual Operation
Shipping wt. 125 lbs (56.6kg) ibility by flowing water through a small hole that
ASTM D2419; AASHTO T176
Sand Equivalent Shaker, Motorized is drilled through the compacted specimen.
Manually operated sand equivalent shaker is ideal The test chamber has a unique clamping ring
ASTM D2419; AASHTO T176
for use on job site to give more uniform shaking for holding the stainless steel mold to the base
Motorized sand equivalent shaker features two action. Shaker consists of mounting bracket with while compacting the sample. Included with the
separate electronic timers (one preset at 45 cylinder holder and two spring steel straps, stroke chamber are screens, base stand, constant head
seconds and the other preset at 10 minutes) to indicator and counter mounted on one end. Uni- reservoir, tubing, connections, pipette and a tool
increase accuracy and ease of operation compared form shaking action is accomplished by pushing for drilling the pinhole. The end cap has a pilot
to a spring-type timer. It is recommended for sam- the top frame by a simple stroke of the hand. Por- hole for drilling the 1.0mm (.040") hole through
ples in the laboratory. The consistent, repeatable table unit features removable wooden carrying the sample. All aluminum parts are anodized for
oscillation of the apparatus eliminates opera- case. Dimensions: 21" x 6.5" x 26.375" (53 x 17 corrosion resistance.
tor-caused variation. Shaking operation delivers an x 67cm).
8" (203mm) stroke at a speed of 175 ±2 strokes Pin Hole Dispersion Apparatus HM-3930
Sand Equivalent Shaker, Manual Operation H-4378 Shipping wt. 6.6 lbs (3kg)
per minute. Dimensions: 12" x 24" x 24"H (31 x Shipping wt. 26 lbs (11.7kg)
61 x 61cm).
Sand Equivalent Shaker, 120V 60Hz H-4374
Sand Equivalent Shaker, 220V 50Hz H-4374.5F
Shipping wt. 125 lbs (56.6kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

88
Hydrometer Tests SOIL-LAB
H-4263A Hydrometer Analysis Set

H-4266

H-4239A
H-4265

H-4239A
H-4244RS H-4244 H-4260A
H-4242 H-4241
H-4247

Hydrometer Jar Bath Soil Hydrometer A Soil Dispersion Mixer

ASTM D422; AASHTO T88; UNE 103.102 ASTM D422; AASHTO T88 ASTM D422; AASHTO T88
The Humboldt hydrometer jar bath is designed Seamless, symmetrical stem and bulb do not vary Modified mixer to meet specifications is used for
to provide a 68°F (20°C) ambient temperature in diameter. One-piece ballast is secured to lower dispersing soil suspensions used in hydrometer
throughout the unit by using a microproces- part of the body. Guaranteed calibration accuracy method of testing sub-grade soils. Heavy-duty
sor-based temperature control with integral heater eliminates errors due to variable dilution. H-4241 mixer operates at a speed above 10,000 RPM
and chiller. The control processor in the H-4239A uses ASTM 152 H scale, graduated to read in (no load). Includes stirring apparatus with H-4266
provides a consistent bath temperature of 68°F grams per liter (g/L) of suspension and has a range stainless steel paddle and H-4265 chrome-plated
(20°C) accurate to within 0.1% of input span ±1°F, of -5 to +60g/L in 1g/L divisions at 68°F (20°C). dispersion cup with 4 sets of permanent interior
which makes it an ideal bath for storing hydrom- Total length: 11" (280mm). baffles. Rounded cup bottom prevents soil accu-
eter jars in accordance with the standards listed Soil Hydrometer A H-4241 mulation. Furnished with 5' cord and 3-prong plug.
above. The Hydrometer bath also can be used for Shipping wt. 2lbs (1kg) Dimensions: 20" x 6.5" x 7" (508 x 165 x 178mm).
many other processes within a lab and can be set Soil Hydrometer B Soil Dispersion Mixer, 120V 60Hz H-4260A
to maintain temperatures within its temperature ASTM D422; AASHTO T88 Soil Dispersion Mixer, 230V 50/60Hz H-4260A.4F
range of 50°F (10°C) and 120°F (49°C). Shipping wt. 17lbs (7.7 kg)
Seamless, symmetrical stem and bulb do not vary
The H-4239A jar bath is fully-insulated and includes in diameter. One-piece ballast is secured to lower Dispersion Cup
a circulating pump, which ensures a constant water part of the body. Guaranteed calibration accuracy Chrome-plated dispersion cup for use with H-4260
temperature throughout bath. The H-4239A can eliminates errors due to variable dilution. H-4242 mixer.
accommodate (8) hydrometer jars at a time. All uses ASTM 151 H scale, graduated to read specific Dispersion Cup H-4265
models include a stainless steel shelf, which sup- gravity with a range of 0.995 to 1.038 in 0.001 divi- Shipping wt. 1.1lbs (0.49 kg)
ports specimens while allowing 2" of free circulat- sions at 68°F (20°C). Total length: 11" (280mm). Stirring Paddle
ing water above and below specimens. Tank vol- Total length: 11" (280mm). Stirring paddle with 3 blade surfaces, 0.75" (19mm)
ume: 20.5 gallons (77.6 Liters) Soil Hydrometer B H-4242 dia. for H-4260A mixer. Shaft threads onto mixer.
Bath dimensions: ID: 37"L x 8"W x 16"D Shipping wt. 1.3lbs (0.59 kg) Stirring Paddle H-4266
(940 x 203 x406 mm) Hydrometer Analysis Set Shipping wt. 0.1lbs (0.45 kg)

Overall dimensions: 48"L x 11"W x 19"D ASTM D422; AASHTO T88 Sodium Hexametaphosphate
(1220 x 280 x483 mm) The Humboldt hydrometer jar bath combined Dispersing agent used in combination with grada-
Hydrometer Jar Bath, 120V 60Hz H-4239A with hydrometer analysis accessories to provide tion analysis of soils.
Hydrometer Jar Bath, 220V 50/60Hz H-4239A.4F a complete testing set. Set includes: 1 lb (0.5kg) H-4247
Shipping wt. 195lbs (88 kg) 10 lb (4.5kg) H-4247.10
Components Shipping wt. 1.6lbs (0.7kg) 11.6lbs (5.2 kg)
Hydrometer Jar
ASTM D422; AASHTO T88 Hydrometer jar bath H-4239A Stopper for Hydrometer Jar
Graduated glass cylinder used in determining Soil hydrometer A H-4241 Rubber stopper for hydrometer jars
amount of soil in dispersed suspensions contains Stopper (Hydrometer Jar) H-4244RS
Soil hydrometer B H-4242
1000ml at 20°C (68°F). Open end is fire-polished Shipping wt. 0.2lbs (0.09 kg)
Hydrometer jars, (8) H-4244
without pour-out. Dimensions: 18" (457mm) x 2.5"
OD (64mm). Base is 4.333" (110mm). Soil dispersion mixer H-4260A
Hydrometer Jar H-4244 Stopper for Hydrometer Jar (8) H-4244RS
Shipping wt. 2lbs (1 kg)
Hydrometer Analysis Set, 120V 60Hz H-4263A
Hydrometer Analysis Set, 220V 50/60Hz H-4263A.4F
Shipping wt. 225lbs (102 kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 89
SOIL-LAB Permeability

HM-5894

HM-5892

HM-5804

HM-5802
H-4270 H-4264
HM-3915

Air Jet Dispersion Tube screen to prevent soil density changes. End caps Shelby Tube Permeameter
ASTM D422; AASHTO T88 and clamping ring are anodized aluminum. Each The Shelby tube permeameter allows you to
Alternative method for dispersing soil suspensions cell comes complete with valves and perforated perform permeability tests within a Shelby
used in hydrometer method of testing sub-grade screens. 9" (229mm) cells are made to order. tube without removing the sample. Ideal
soils. Uses air bubbles to disperse soil samples. Permeameters with manometer outlets for cohesionless materials and sands. It
Comparative tests show the unique air jet action Permeameter Cell, 2.5" (63mm) HM-5801 is suggested that the specimen be ejected at test
achieves better dispersion of clays with less deg- Permeameter Cell, 3.0" (76mm) HM-5802 conclusion and examined for voids or large aggre-
radation of soft particles like micas. Provides Permeameter Cell, 4.5" (114mm) HM-5803 gate, which possibly could affect the test results.
easier method, as samples are dispersed right in Permeameter Cell, 6" (152mm) HM-5804 Two sets of end caps fit over a Shelby tube liner
the sedimentation cylinder, eliminating the mess Permeameter Cell, 9" (229mm) HM-5805 up to 6" long. End caps each contain valve to
and sample loss from moving samples from one Shipping wt. 3-33 lbs (1.3 - 14.9kg) control flow of permeants through the specimen,
container to the other. Used by U.S. government Falling Head Permeameter Cells along with a porous stone to prevent material from
agencies, State DOTs and consulting geotechnical ASTM D2434; BS 1377 Part 5 flowing into and clogging the valve. End caps are
engineers. anodized aluminum. Includes o-rings, connecting
For use with granular soils in determining the coef-
rods, clamping knobs, and tubing. Shelby tube not
Air Jet Dispersion Tube H-4270 ficient of permeability via the falling-head method
Shipping wt. 6 lbs (2.72kg)
included.
for laminar flow of water. Compact and portable
Dispersion Hand Stirrer unit includes a spring incorporated into top cap Shelby Tube Permeameter, 2" HM-3913
ASTM D422; AASHTO T88 to apply 5-10 lbs. force against screen to prevent Shelby Tube Permeameter, 2.5" HM-3914
soil density changes. End caps and clamping ring Shelby Tube Permeameter, 3" HM-3915
Inexpensive hand stirrer for dispersing soil suspen-
Shipping wt. 6 lbs (2.72kg)
sions used in hydrometer method of testing sub- are anodized aluminum. Each cell comes complete
grade soils with valves and perforated screens. 9" (229mm)
cells are made to order. Tubing for use with Permeameter Cells
Dispersion Hand Stirrer H-4264 Flexible, clear PVC tubing for use with Permeame-
Shipping wt. 2 lbs (0.9kg) Permeameters without manometer outlets
ter cells. 0.25" ID x 0.375" OD
Constant Head Permeameter Cells Permeameter Cell, 2.5" (63mm) HM-5891A
Tubing, 0.25" ID x 0.375" OD, 25ft. HM-003349
ASTM D2434; BS 1377 Part 5 Permeameter Cell, 3.0" (76mm) HM-5892
Shipping wt. 0.5 lbs (0.2kg)
Use to determine the coefficient of permeability Permeameter Cell, 4.5" (114mm) HM-5893
by the constant head method for laminar flow of Permeameter Cell, 6" (152mm) HM-5894
water through granular soils. Two manometer ports Permeameter Cell, 9" (229mm) HM-5895
Shipping wt. 3-33 lbs (1.3 - 14.9kg)
are grooved & screened on the inside. Distance
between ports is always equal to diameter. 100
mesh screens used to prevent migration of mate- Permeameter Replacement Parts
rial through valves & tubing during test. Acrylic HM-5801 Replacement
HM-5801.7
chamber permits viewing sample. Spring incorpo- Screens 2.5" (2)
rated into top cap to apply 5-10 lbs. force against HM-5801 & HM-5891A Re-
HM-5801.8
placement Screens 2.485" (3)
Perforated Plate 2.5" HM-5801.9

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

90
Permeability SOIL-LAB

H-4145

HM-5880

HM-5860 HM-5890

HM-5861 HM-5896
HM-3701

H-4146

Dual Manometer Tube Stand Constant Head Tank

Permeameter Replacement Parts
ASTM D2434 Acrylic tank with regulating valve for flow control
of water and a porous media on bottom to filter Filter stone for H-4146 H-4148X
Economical manometer tube setup for use with
many permeameters. Two acrylic tubes with valves out air bubbles. Maintains constant water head Filter stone for H-4145 H-4148
mounted on aluminum rail, with scale for monitor- via an overflow port. Includes: saddle valve for Porous stone for H-4146 H-4148.6
ing flow volumes. Scale is 100cm long with cm and connection to either de-aired or tap water source;
Porous stone for H-4145 HM-4184.100
mm graduations. Each tube has its own valve to rails for wall mounting with easy height adjust-
ment and tubing for hook-up to test chamber. Tank Spring for H-4146 and H-4145 H-4145.8
allow running two tests. Choose wall mount or free
standing. Includes tubing. measures 5.625" diameter x 5.25" height.
Constant Head Tank, 1500cc HM-5880 Permeameter Accessories
Dual, Manometer Stand, Wall Mount HM-5860
Shipping wt. 5 lbs (2.2kg) H-1763A or
Dual, Manometer Stand, Free Standing HM-5861 High Vacuum Pump
Shipping wt. 8 lbs (3.7kg) Compaction Hammer H-1763A.4F
Single Manometer Tube Stand Rod with sliding weights on a 2" (51mm) dia foot. Material Scoop, #2 Round H-3731
ASTM D2434 Stop allows adjusting height of drop up to 8"
Mixing Bowl, 8qt (7.6L)
(203mm). Includes one .25 lb. (100g) and one 2.25 H-4938
Economical manometer tube setup for use with 12.5" x 5.5" (318 x 140mm)
lb. (1kg) weight.
many permeameters. Single acrylic tube with
Compaction Hammer HM-3701 Graduated Cylinder, 250mL, H-4915.250
valves mounted on aluminum rail, with scale for
Shipping wt. 6 lbs (2 .7kg) Glass or Plastic H-4916P.250
monitoring flow volumes. Scale is 100cm long with
cm and mm graduations. Choose wall mount or Compaction Permeameters
free standing. Includes funnel and tubing. ASTM D5856
Single, Manometer Stand, Wall Mount HM-5890 For determining permeability of clay, sand, and
Manometer Stand, Free Standing HM-5896 gravel soils. Uses Proctor plasticity compaction
Shipping wt. 8 lbs (3.7kg) method. Two-piece cylindrical mold includes:
upper plate with valve; water inlet/outlet; filter
base plate; and filter stones. 6"W x 6"D x 12"H.
Compaction Permeameters, 4" H-4145
Compaction Permeameters, 6" H-4146
Shipping wt. 25.9 lbs (11.7kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 91
SOIL-LAB Permeabilˆty
Triaxial cells can
also be used for
permeability testing.

HM-4199B-6

HM-4188.28

HM-4188B
HM-4199B-4

HM-4199B

For Sample Prep Accessories

and consumables, please see
pages: 137 and 138.

Permeability Cells, Top Cap/Base Pedestal Sets and Individual Top Caps and Bases
Cell Cell Set Top Cap Base Set SS Top Cap SS Base
Size
Standard Stainless Aluminum Only Only Stainless Steel Only Only
35mm HM-4188.35 HM-4199.35T HM-4188.35B HM-4188.35SS HM-4199.35SST HM-4199.35SSB
1.4" HM-4188.14 HM-4199.14T HM-4188.14B HM-4188.14SS HM-4199.14SST HM-4199.14SSB
38mm HM-4188.38 HM-4199.38T HM-4188.38B HM-4188.38SS HM-4199.38SST HM-4199.38SSB
1.5" HM-4188.15 HM-4199.15T HM-4188.15B HM-4188.15SS HM-4199.15SST HM-4199.15SSB
50mm HM-4188.50 HM-4199.50T HM-4188.50B HM-4188.50SS HM-4199.50SST HM-4199.50SSB
HM-4188B HM-4188SS
2.0" HM-4188.20 HM-4199.20T HM-4188.20B HM-4188.20SS HM-4199.20SST HM-4199.20SSB
70mm HM-4188.70 HM-4199.70T HM-4188.70B HM-4188.70SS HM-4199.70SST HM-4199.70SSB
2.8" HM-4188.28 HM-4199.28T HM-4188.28B HM-4188.28SS HM-4199.28SST HM-4199.28SSB
100mm HM-4188.100 HM-4199.100T HM-4188.100B HM-4188.100SS HM-4199.100SST HM-4199.100SSB
4.0" HM-4188.40 HM-4199.40T HM-4188.40B HM-4188.40SS HM-4199.40SST HM-4199.40SSB

Permeability Cells The cell has five, no-volume-change, valves Brass valves are standard with these cells, but stain-
ASTM D5084; BS 1377 Part 6 1990 aligned along the front of the cell for maximum less steel valves (stainless steel is typically used
HM-4188B permeability cells are constructed of convenience. Two valves handle top drainage, with hazardous materials) are an option, please
high-quality materials throughout for long-lasting two valves handle bottom drainage, and one valve inquire. Cell dimensions are: 13.75" H x 8.75" dia.
performance. The cell top and base are preci- handles filling/emptying and providing confining (349.2 x 222.3mm). Overall dia. is: 11" (279.4mm).
sion machined from 6061 T6 aluminum and black pressure to the cell. Triaxial Cells— HM-4199
anondized for a durable finish. To facilitate sample The removable base pedestal accommodates var- For those who plan to do triaxial tests in addition
setup, the chamber and cell top can be quickly and ious sample diameters from 35mm to 4 inch, see to permeability testing, consider using HM-4199B
easily removed by loosening the three knobs that chart above for model numbers corresponding to or HM-4199SS triaxial cells for the added conve-
hold the upper assembly to the base. The clear the size needed. Cells are available with black-an- nience of using one cell for both tests. See page
acrylic chamber provides a working pressure of 150 odized aluminum or stainless steel top caps and 123.
psi (1,000 kPa) and is tested to 250 psi (1,700 kPa). base pedestals, refer to chart above.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

92
Permeability SOIL-LAB

HM-4150A
HM-4140.3F

HM-4150.3F

HM-4160.3F HM-4160A

Humboldt FlexPanels The long, narrow burette design of Humboldt's All Humboldt FlexPanels use no-volume change
ASTM: D1559, D2850, D2166, D4767, and FlexPanels provide faster test processing times Swagelock valves and Fairchild constant-bleed
D5084; AASHTO: T193, T296, T297, T208; BS when compared to larger, shorter burette systems, type precision regulators for accurate control. All
1377: Part 4: 1990, BS 1377: Part 6, BS 1377: Part while providing the same volume. This is due to inlets and outlets utilize quick-connects to ensure
7: 1990, BS 1377: Part 8: 1990 the reduced amount of meniscus formation in the fast, accurate setup to permeameter cells, as well
Permeability testing measures the rate of discharge narrower burettes, which allows the water level to as air, water and drain hook ups. Fittings, tubing
of water under laminar flow conditions through a drop faster, resulting in faster readings. In addi- and connectors are supplied with each unit. All
unit cross-sectional area of a porous medium under tion, the use of longer/narrower burettes and a FlexPanels are designed to handle air pressures
a unit hydraulic gradient and standard (20°C) tem- scale graduation of 0.02ml, also provides an eas- up to 150 psi. For testing contaminated samples,
perature conditions. In permeability testing, soil is ier-to-read and more accurate scale. Humboldt offers an optional Toxic Interface Unit,
subjected to water under a known pressure, and FlexPanels also feature a bias regulator and bridge. which prevents toxic fluids and vapors from enter-
the flow is measured. The coefficient of permeabil- The bias regulator maintains the differential pres- ing the FlexPanel. See facing page.
ity (k), or simply permeability, expresses the ability sure when confining and back pressures are Humboldt FlexPanels Features:
of water to flow through the particular medium. increased. The bridge delivers simultaneous con- Humboldt FlexPanels are constructed of light-
The “constant head” test method is applicable to trol of base and top pressures through the use of weight aluminum for long, rust-free life. FlexPanels
course granular soils such as sands and gravels. just one regulator. This feature minimizes operator provide an accurate and easy-to-operate solution
The “falling head” test method is applicable to fine time and reduces the margin of error in opening for controlling compressed air, water, de-aired
grain soils. Either method may be used to test clay and adjusting regulators during a test. The Hum- water and vacuum without the need for air/water
soils. boldt FlexPanel system is comprised of 5 sepa- bladder interfaces to produce the pressures neces-
Humboldt FlexPanels rate panel configurations, which can be grouped sary for permeability and triaxial testing. FlexPanels
Humboldt FlexPanels provide a simple and highly together to accommodate from 1 to 6 cell setups. utilize a set of three burettes to control cell, top cap
efficient distribution system for providing air, water Fast and Easy Setup and Operation and base pedestal pressures. This extremely ver-
and de-aired water for use in permeability and tri- Humboldt FlexPanels make setup fast and easy satile pressure system controls the pressure, water,
axial testing applications. The FlexPanel’s simple, with clearly labeled ports and quick-connect hook- de-airing tank and vacuum from a single panel.
straight-forward configuration, with its integral ups. Operation is just as easy with clearly labeled The three burettes allow for the control of the cell
burettes provides a condensed/compact design controls, large gauges and easy-to-read burette pressure and the back pressure for each cell. They
that takes up less counter space than competing markings. can monitor volume change in the sample and can
systems with air/water bladders. be used to measure the flow of water through the
sample for permeability testing.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 93
SOIL-LAB Permeability

HM-4140.3F HM-4140M.3F HM-4150.3F HM-4150M.3F HM-4160.3F HM-4160M.3F HM-4150A HM-4160A

Pressure/ 2-150 psi 14-1000 kPa 2-150 psi 14-1000 kPa 2-150 psi 14-1000 kPa
Resolution (0.1 psi) (1 kPa) (0.1 psi) (1 kPa) (0.1 psi) (1 kPa)
Not Applicable
0-14.7 psi (0-100kPa) 0-14.7 psi (0-100kPa) 0-14.7 psi (0-100kPa)
Vacuum
or 30 Hg or 30 Hg or 30 Hg or 30 Hg or 30 Hg or 30 Hg
Inner Burette
Cell Not Applicable 50cc x 0.1 cc (ml)

Top Not Applicable 10cc x 0.02 cc (ml)

Base Not Applicable 10cc x 0.02 cc (ml)
Outer Burette
Cell Not Applicable 400 cc (ml)
Top Not Applicable 460 cc (ml)
Base Not Applicable 460 cc (ml)
Voltage 110/220VAC 50/60Hz
Not Applicable
Power 6 watts
Operating
14 to 158°F (-10 to 70°C)
Temperature
8 x 8 x 37.5" 8 x 25.5 x 37.5" 8 x 43.5 x 37.5" 8 x 19.5 x 37.5" 8 x 37.5 x 37.5"
Dimensions
(203 x 203 x 952mm) (203 x 648 x 952mm) (203 x 1105 x 952mm) (203 x 495 x 952) (203 x 952 x 952)

Shipping
35lb (16kg) 95lb (43kg) 145lb (66kg) 107lb (49kg) 157lb (71kg)
Weight

FlexPanels can manually measure volume change Control Panels Toxic Interface Unit
or permeability in a triaxial test sample without the The HM-4140 stand-alone control panel or the inte- Safe and convenient means of performing permea-
use of a volume change apparatus, a distinct ben- gral control panels on the HM-4150 and HM-4160 bility tests of corrosive or toxic permeants. Flexible
efit when compared to air/water bladder systems. provide pressure controls and readouts for perme- fluoro-elastomer bladder accumulator interfaces
• Bias pressure regulator allows simultaneous ability and triaxial applications. All three controllers between control panel and sample drains on per-
control of confining and back pressures, while provide identical controls, which include: a digital, meameter. Serves as a fluid separator to prevent
maintaining a constant differential readout pressure meter, a pressure supply gauge, permeant from entering control panel. Also pre-
a master pressure regulator, a vacuum supply vents contact of air with permeant, thus no toxic or
• Longer burette and 0.02ml graduation give
gauge, a master vacuum regulator, de-aired water corrosive vapors can escape into lab. Handles any
more accurate results, better productivity, and
tank controls, tap and de-aired water supply out- fluid compatible with stainless steel, PTFE, and the
faster turnaround
lets and pressure and vacuum outlets. fluoro-elastomer bladder. Unit measure 8" H x 5"
• Uses no-volume-change Swagelock valves
Auxiliary Panels dia. Two units are required for each cell.
• Bridge feature delivers simultaneous control of The HM-4150A and HM-4160A auxiliary panels Toxic Interface Unit HM-4190
base and top pressures by adjusting one pres provide additional sets of burettes, which can be Shipping wt. 7 lbs (3.1kg)
sure regulator simplifying testing used to expand the capacity of a system. Each set
• Quick-connect hookups for fast and reliable of three (3) burettes provide the controls necessary
set up. for another cell to be used. The HM-4150A pro-
• Master control panel houses digital pressure vides one (1) set of burettes and the HM-4160A
readout for the controlling pressure, inlet vac- provides two (2) sets. Humboldt recommends any
uum regulator and gauge, inlet pressure regu- combination of up to six (6) burettes sets can be
lators and gauge, de-aired water tank controls, used with each control panel.
tap and de-aired water supply outlets, and pres-
sure and vacuum outlets

HM-4190

Rear of panel showing

quick-connect hookups
and plumbing.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

94
Expansion, Volume Change SOIL-LAB

HM-5405

HM-2415

HM-1975-D
HM-1972-1E
HM-4184.399T

HM-3701

Expansion Index Consolidometer Soil Volume Change Meter (PVC) Basic Swell/Expansion Consolidometer
ASTM D4829 Used to evaluate potentially dangerous swelling/ A self-contained consolidometer used to con-
Self-contained unit for conducting expansion tests shrinking conditions found in clay soils in commer- duct swell expansion tests on soil specimens.
on cured soil specimens. After compaction in stain- cial/residential development sites. PVC (potential Set includes: stainless steel base/acrylic ring
less steel ring, specimen is placed in the conso- volume change) refers to maximum possible vol- device with adjustable, dial indicator standard
lidometer with air-dried porous stones, and loaded ume change a soil could undergo when submitted and bracket, a compaction specimen ring, top
with a stainless steel weight. Specimen is allowed to changing moisture conditions. It features fast and bottom porous stones and a 60 psf stainless
to consolidate for 10 minutes, after which it is and simple operation, measuring both shrink- steel loading weight. Consolidometer can also
immersed in distilled water for up to 24 hrs. During age and swelling of soils and is ideal for gauging be used with cutting ring, listed below, instead
this time, height of specimen is recorded to deter- swelling of clay soils. Includes: H-4454.010, 1,000 of supplied compaction ring for use in acquiring
mine maximum swell. Corrosion resistant, durable lb. (4.5 kN) capacity proving ring, mold assem- samples from undisturbed Shelby tube samples.
anodized aluminum and stainless steel construc- bly, loading cap, porous stones, loading pistons, A dial indicator is required, choose from either
tion. Includes anodized aluminum base and collar, 2-3/4" (70 mm) dia. specimen ring (HM-1220.70), H-4471 with a range of .500" with .0001" divi-
stainless steel specimen ring and weight, 12.6 lb. and conversion charts. 7.25" (184 mm) dia. base x sions or H-4465.12 with a range of 12mm and
(5.7kg) loading weight, and 3.99" dia. x 0.5" (101.4 15.5" (394 mm) height. .002mm divisions. Alternative loading weights are
x 12.5mm) porous stones. Dial Indicator required, Soil Volume Change Meter (PVC) HM-2415 also available, please enquire.
see below. 6" dia x 11" H (152 x 279 mm). Shipping wt. 32 lbs (14.5kg) Consolidometer, 2.440" HM-1972-1D
Compaction Base and Collar Consolidometer, 2.500" HM-1972-1E
Expansion Index Consolidometer HM-5405
Shipping wt. 8 lbs (4kg)
Shipping wt. 20 lbs (9kg) The compaction base and collar is used to produce
Dial Indicators for Consolidometer a soil sample for use with the basic swell/expan- Components for HM-1972-1D
The expansion index consolidometer requires one sion consolidometers. Use HM-3701 compaction Cutting Ring, SS HM-1220.24.8
of these dial indicators hammer.
Compaction Ring, SS HM-1972-3D
Dial Indicator, 0.2" range x 0.0001" H-4460 Compaction Base & Collar, 2.440" HM-1975-D
Compaction Base & Collar, 2.500" HM-1975-E Loading Weight, 60 PSF (SS) HM-1972-6D
Dial Indicator, 0.5" range x 0.0001" H-4471
Dial Indicator, 1.0" range x 0.001" H-4158.1
Shipping wt. 7 lbs (3kg) Top Porous Stone HM-4184.240
Shipping wt. 1.3 lbs (0.6kg) Compaction Hammer Base Porous Stone,
Rod with sliding weights on a 2" (51mm) dia foot. HM-4184.331
Porous Stone 3.31" dia. x 0.25" thick
Stop allows adjusting height of drop up to 8"
Porous stone for use with HM-2405 consolidome-
(203mm). Includes one .25 lb. (100g) and one 2.25
ter, 3.99" x 0.5". Components for HM-1972-1E
lb. (1kg) weight.
Porous Stone, 3.99" x 0.5" HM-4184.399T
Compaction Hammer HM-3701 Cutting Ring, SS HM-1220.25.8
Shipping wt. 0.5 lbs (0.2kg)
Shipping wt. 6 lbs (2.7kg) Compaction Ring, SS HM-1972-3E
Loading Weight, 60 PSF (SS) HM-1972-6E
Top Porous Stone HM-4184.2485
Base Porous Stone,
HM-4184.331
3.31" dia. x 0.25" thick

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 SOIL MECHANICS
Consolidation . . . . . . . . . . . . . 102-109 Triaxial Components. . . . . . . . . . . 134-135
Data Acquisition . . . . . . . . . . . . 139-142 Triaxial Distribution Panels. . . . . . . . . 124-125
Direct Shear. . . . . . . . . . . . . . 110-115 Triaxial Load Frames. . . . . . . . . . . 118-122
Direct Shear, High Capacity . . . . . . . . 116-117 Triaxial Sample Prep . . . . . . . . . . . 137-138
Elite Series Equipment . . . . . . . . . . . 98-99 Triaxial Setups . . . . . . . . . . . . . 126-133
Erosion . . . . . . . . . . . . . . . . .Ê143 Triaxial Setup Accessories . . . . . . . . . . . 136
NEXT Software . . . . . . . . . . . . 100-101 Upgrades . . . . . . . . . . . . . . . . 99
Triaxial Cells. . . . . . . . . . . . . . . .Ê122
98
Elite Series Equipment SOIL MECHANICS

E L I T E S E R I E S
Soil Mechanics Equipment
Humboldt's Elite Series testing machines feature a Stand-Alone Control tion and report generation for those using a com-
7", full-color touch-screen controller that provides In stand-alone applications, you will be able to puter to control various testing operations.
you with full, graphical monitoring of all testing run tests and display results while viewing tabula- In addition, operators have the ability to view and
functions in stand-alone applications, while main- tion, basic x-y graphs and instrument readings in control testing operations from a PC in the lab,
taining full PC control when desired. With Elite real-time during the test, using user-defined basic in the next room or at a different location, while
Series machines you can have full, finger-tip con- data acquisition. Test data is stored in the device also providing report generating capabilities using
trol and monitoring of all testing functions with the and can be downloaded to a USB drive via the Humboldt NEXT software test-specific modules,
touch-screen controllers, found on our load frames, machine's USB port or the data can be transferred see page 101.
consolidation and direct-shear machines, as well as to a networked computer. The USB port can also So, whether you are controlling a single load
our other data acquisition loggers and controllers. be used to power a wireless access point, which frame, controlling multiple machines or even
Elite Series machines provide at-a-glance mon- can provide a wireless hook-up with the PC, if no a complete geotechnical lab, Humboldt's
itoring of testing functions, in a real-time graphi- LAN is available. NEXT Basic software, in conjunction with Hum-
cal display, without the use of a PC, building upon Computer Control boldt's Elite Series machines provide a com-
Humboldt's dedication to modular, stand-alone, Humboldt's Next, Basic software is included with plete solution for the calibration, acquisition,
data-acquisition. the all Elite Series machines. This software provides recording and presentation of testing data
robust machine control, calibration, data acquisi- in data tabulation and graphic chart formats.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 99
SOIL MECHANICS Elite Series Equipment

HM-3000.3F Upgrade
HM-5030U
to HM-5030.3F
HM-2900.3F Upgrade
HM-5020U
to HM-5020.3F
HM-2450.3F and HM-2315
HM-5240U
Upgrade to HM-5240.3F
Upgrade your existing HM-2325A.3F Upgrade
HM-5320U
to HM-5320.3F
Humboldt equipment to HM-2330D.3F Upgrade
HM-5330U
to HM-5330.3F
the Elite Series HM-2470.3F Upgrade
You can upgrade your existing Humboldt test- HM-5470U
to HM-5470.3F
ing equipment to our Elite Series machines. These
HM-2560.3F Upgrade
upgrades require your existing machine to be sent HM-5560U
to HM-5560.3F
to Humboldt for a complete refurbishment and
HM-2750A.3F Upgrade
upgrade to the new equipment. Upgrades include HM-5750AU
to HM-5750A.3F
the new 7", full-color touch-screen controller, and
a new enclosure. Refer to the chart on the right for HM-2750D.3F Upgrade
HM-5750DU
to HM-5750D.3F
available upgrades.
HM-4469C Upgrade
HM-4470U
to HM-4470C

control and monitoring

of all testing functions

Choose:
Stand-Alone or Computer Control
www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300
100
Elite Series Equipment SOIL MECHANICS

Humboldt's, NEXT Basic software provides: Humboldt's NEXT Basic software is used to control With Humboldt's NEXT Basic software, operators
• Machine control, and data acquisition the operation of Humboldt's testing machines, as have the ability to view and control testing oper-
via networked computer well as provide data acquisition and reporting of ations from a PC in the lab, in the next room or at
• Provides the ability to use NEXT software's, test data. The software provides a computer-based a different location, as well as the ability to control
advanced test-specific modules platform with the ability to configure testing and monitor multiple tests at the same time.
machines and the testing process; calibrate trans- So, whether you are controlling a single testing
• Real-time graphical chart and numerical
ducers, load cells and digital indicators; specify operation or controlling a complete geotechnical
display of tests via computer display
testing parameters and limits, operate the machine lab, Humboldt's NEXT Basic software, in conjunc-
• Effective sampling rate of 50 readings during the testing and provide detailed reports of tion with Humboldt's testing machines, provides a
per second the data collected in tabular or graphical formats. complete solution for the calibration, acquisition,
• Stores unlimited tests with up to From controlling a single operation to a complete recording and presentation of testing data in data
3000 points per test. geotechnical lab, Humboldt's NEXT Basic data tabulation and graphic chart formats.
• Up to 255 individual tests can be run acquisition software, in conjunction with compati-
simultaneously from a single PC ble Humboldt testing equipment, provides a com-
• Advanced, test-specific modules are available, plete solution for the acquisition, recording and
which provide all the calculations and graphs presentation of test data. NEXT Basic software is
required per testing standards included with many of Humboldt's load frames,
• Provides advanced graphing capabilities consolidation and direct shear machines; providing
robust machine control, calibration, data acquisi-
• Provides full-unit customization
tion and report generation for those using a com-
• Reports can also be exported to Excel or a CSV
puter to control load frame operations.
file, if desired, and, we can provide custom inte-
gration/export solutions for LIMS, EQuIS, gINT,
etc.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 101
SOIL MECHANICS NEXT Software
CBR/LBR Module, HM-5001SW

NEXT Test-Specific
Software Modules
Humboldt NEXT Basic software can be enhanced with the purchase
of test-specific modules. These modules provide you with the fol-
lowing capabilities beyond the standard software included with your
ELITE Series load frames.
• test-specific setup, which guides you through the process and
includes selecting data collection parameters that best fit the spe-
cific test
Unconsolidated Undrained (UU) Module, HM-5002SW
• input specific project information for each test, such as project
name, client information, etc

• all test-specific initial, intermediate, and final parameters required by

ASTM and BS standards are dynamically calculated for you, based
on your input of specimen information, such as size, weight, etc

• tabulated test data, graphs and all test-specific calculations are

provided in real time, allowing you to monitor tests in process

• generate test-specific reports that include all graphs and data pre-
sented in a project

• simultaneously run multiple tests on one computer, involving any of

the available NEXT modules and any compatible Humboldt equip-
ment up to 255 device connections, which is up to 1020 inputs

• create and store test-specific test setup templates for rapid setup Consolidated Undrained (CU) Module, HM-5003SW
of future tests

• produce test-specific graphs, which allow you to draw construction

lines to calculate angles and other test-specific parameters

• automatically recover from a PC shutdown without loss of data

• all unit parameters can be adjusted individually

• easily change between different test standards

• access free, down loadable software upgrades for purchased

modules

• additional modules are available, please enquire

Consolidation Module HM-5100SW

Unconfined Compression (UC) Module, HM-5004SW
Direct Shear Module HM-5700SW
CBR/LBR Module HM-5001SW
Unconsolidated Undrained (UU) Module HM-5002SW

Consolidated Undrained (CU) Module HM-5003SW

Unconfined Compression (UC) Module HM-5004SW
Consolidated Drained (CD) Module HM-5006SW
Marshall Module HM-5005SW

YOU CAN PURCHASE AND REGISTER

YOUR SOFTWARE MODULES ONLINE!
https://www.humboldtmfg.com/next-software-modules.html

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

102
Consolidation SOIL MECHANICS
E L I T E S E R I E S
Automated Consolidation
ConMatic IPC, Automated Consolidation System assistance. The system automatically moves through
ASTM: D2435, D4546, AASHTO: T216, BS:1377:5 the different test parameters specified by the user
The HM-5470.3F ConMatic IPC is a fully-automated, with incremental consolidation tests typically being
incremental pressure controller for performing completed in 24 to 48 hours. The Humboldt NEXT
incremental consolidation and one-dimensional software with Consolidation module uses sample
swell tests. The ConMatic IPC allows consolidation, deformation readings taken from the displacement
constant load and volume swell tests to be run transducer and load readings from the load cell
automatically, freeing up technicians for other tasks to maintain a constant applied stress or strain to
and reducing the duration of the testing proce- the sample through the use of a digital pressure
dures by more than half—effectively saving time regulator. Test results are recorded and rendered
and manpower and increasing lab profitability. in real-time on the computer screen while test
One ConMatic IPC automated system can replace data is stored and calculations are performed auto-
the production of several manual machines— matically. The Humboldt NEXT software with Con-
running incremental consolidation tests accord- solidation module provides:
ing to ASTM D2435 Method B, where successive • Live tests and live graphing capabilities
load increments are applied after 100% primary (real-time)
consolidation. • Complete test reporting including all calcula-
Once a sample has been placed onto the test plat- tions and graphs required for testing
form and the test conditions set, the ConMatic IPC • Review and exporting of tests using Microsoft
performs all consolidation tests, including moving Excel
to the next stress level, without operator • Smart Test Function: automatically picks up
where it left off if the test was not finished due to
unexpected events within your computer
The unique design of the ConMatic IPC system
enables the user to connect multiple ConMatic
IPC units to a single computer and run them inde-
pendently and simultaneously.

Controller Specifications:
Display (Resistive Touch) 7" (178mm) VGA (480 x 800)

Real-time test data Graphic and tabulation

Processor Dual 32-bit ARM

RAM 64MB

Memory, non-volatile 4GB

Analog to digital converter 24 bit

Data acquisition 2 Channels

Logging speed up to 50 readings per second

Multi-test storage 1000

Points per test 3000

export data, import/export

USB port (front)
calibration data, WiFi

provides external power

USB port (back)
for wireless access point

Ethernet connection for network connectivity

Emergency stop Large button

HM-5470.3F 24-bit differential
2
analog to digital converter

Ambient temperature
1
sensor

Firmware Update Ethernet or flash drive

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 103
SOIL MECHANICS Consolidation
Stand-Alone Control
Computer Control

Stand-Alone Control Computer Control Specifications:

Humboldt's touch-screen controller provides you NEXT software and the enhanced Consolida- Sample size up to 4" (100mm)
with full, graphical monitoring of all testing func- tion module, HM-5100SW, is included with the Maximum load 2200lbf (10kN)
tions in a stand-alone application, while maintain- ConMatic IPC automated consolidation machine.
Clearance, vertical 8.25" (210mm)
ing full computer control when desired. This software provides robust machine control, cal-
ibration, data acquisition and report generation for Clearance, horizontal 7.75" (197mm)
Now you can have full, finger-tip control and mon-
itoring of all testing functions with Humboldt's those using a computer to control consolidation Maximum piston
0.5" (12.7mm)
touch-screen controller, found on the ConMatic testing operations. travel
IPC automated consolidation system. This sev- In addition, operators have the ability to view and Dimensions 12" x 12" x 30"
en-inch, waterproof screen provides at-a-glance control testing operations from a PC in the lab, in (L x W x H) (305 x 305 x 762mm)
monitoring of testing functions, in a real-time the next room or at a different location, while also
graphical display, without the use of a computer, providing report generating capabilities using the
ConMatic IPC includes:
building upon Humboldt's dedication to modular, consolidation test-specific software module.
stand-alone data acquisition. (1) S-type load cell 2,000 lbs
So, whether you are controlling a single consol- HM-2300.20
(10kN) with 0.75" adapter
Now, in a stand-alone application, you will be able idation machine, controlling multiple machines
to run tests and display results while viewing tab- or even a complete geotechnical lab, Hum- (1) Linear strain transducer,
HM-2310.10
ulation, basic x-y graphs and instrument readings boldt's NEXT software, in conjunction with Hum- 1.0" (25mm)
in real-time during the test, using user-defined, boldt's ConMatic IPC, provides a complete solu- (1) NEXT consolidation
HM-5100SW
basic data acquisition. Test data is stored in the tion for the calibration, acquisition, recording software module
device and can be downloaded to a USB drive via and presentation of consolidation testing data
the machine's FRONT USB port or the data can be in data tabulation and graphic chart formats.
transferred to a computer via the LAN port.
ConMatic IPC, 120/220V 50/60Hz HM-5470.3F
A second USB port located on the back of the • Machine control, and data acquisition Shipping wt. 52 lbs (23.85kg)
machine can also be used to power a wireless via networked computer
access point, which can provide a wireless hook-up • Provides the ability to use Next Software's,
with a computer, if no LAN is available. advanced test-specific modules Additional Items needed for setup:
Touch-Screen Controller provides: • Real-time graphical chart and numerical
• 2-channel data acquisition display of tests via computer display Consolidation Installation and Spare Parts Kit
• Hi-res, 7", waterproof, touch-screen • Effective sampling rate of 50 readings Installation and spare parts kit provides tubing,
provides total control and real-time per second fasteners and tools to complete an installation of
graphical display of tests • Stores unlimited tests with up to pneumatic consolidation equipment.
• Machine/Test control and data acquisition 3000 points per test. Consolidation Installation and Spare Parts Kit HM-4168
via touch-screen • Up to 255 individual tests can be run
• Control both channels at the same time simultaneously from a single PC ConMatic IPC System Requirements:
• Calibration of channels to load cell and • Provides advanced graphing capabilities AC Supply: 110/220 VAC 50/60 Hz 5 Amp
transducer • Provides full-unit customization Air Supply: Air Supply: Clean and dry
• Real-time graphical chart and numerical • Reports can also be exported to Excel or (air filter, water trap),
display of tests via touch-screen display a CSV file, if desired, and, we can provide minimum: 100 psi (700kpa)
• Effective sampling rate of 50 readings custom integration/export solutions for LIMS, continuous air supply,
per second EQuIS, gINT, etc. 10CFM (0.3 m3/min)
• Stores up to 1000 tests with 3000
points per test
• 2 USB ports. One in front for data transfer
and the rear port is for powering a wireless
access point.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

104
Consolidation SOIL MECHANICS

HM-2432A.3F

ConMatic System Requirements:

AC Supply: 110/220 VAC 50/60 Hz 5 Amp
Air Supply: Air Supply: Clean and dry
(air filter, water trap), minimum:
100 psi (700kpa) continuous air
supply, 10CFM (0.3 m3/min)

ConMatic Consolidation Machine • Flexible load choice

Typical HM-2432A.3F Consolidation Setup:
ASTM: D2435, D4546, AASHTO: T216, BS:1377:5 • Not sensitive to shock
Part # Description
Compact and easy-to-use, the HM-2432A.3F • Choice of English or Metric models
pneumatic consolidation load frame is used to Pneumatic Consolidation
Unit can be used with a standard mechanical dial
estimate the rate and amount of settlement antic- HM-2432A.3F ConMatic 32 TSF
gauge setup or, for data acquisition applications,
ipated for a proposed structure. The unit applies HM-1220.XX Fixed ring consolidation cell
it can be teamed with digital indicators or strain
loads instantly without impact for stress-controlled
transducers (LSCT) coupled to one of the Hum- H-4471CC Dial gauge, 0.5" X .0001" CC
consolidation testing; and, maintains the load
boldt data loggers.
regardless of sample compression. Its small foot-
ConMatic TSF, 120/220V 50/60Hz HM-2432A.3F
print saves valuable lab counter space while main-
ConMatic kgf/cm2, 120/220V 50/60Hz HM-2432AM.3F
taining its versatility by supporting fixed ring, float- Typical HM-2432AM.3F Consolidation Setup:
Shipping wt. 48 lbs (21.7kg)
ing ring, or permeability cells. Part # Description
• Highly-sensitive accuracy in lower load ranges Pneumatic Consolidation
• Integral digital readout simplifies checking HM-2432AM.3F ConMatic 32 TSF
applied load and setup of predetermined load
HM-1220.XX Fixed ring consolidation cell
• Adjustable upper cross beam
Dial gauge,
• Instantaneous loading without impact H-4465.12CC
12mm X .002mm CC

Part Numbers ending in .XX require a size code to be entered referring to the sample size to be tested.
For Consolidation samples, sizes are: .20 = 2.0"; .242 = 2.42"; .25 = 2.5"; .30 = 3.0"; .40 = 4.0"; .50 = 50mm; .70 = 70mm;
.75 = 75mm, and .100 = 100mm. *Metric applications: Use HM-1122 weight set (32kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 105
SOIL MECHANICS Consolidation
Typical Consolidation Data Acquisition Setups Using Humboldt Data Loggers

HM-2432A.3F shown with HM-5320.3F

HM-2432A.3F shown with HM-5320.3F
Data logger, Strain transducer and Fixed ring
Data logger, Strain transducer and Fixed ring
consolidation cell.
consolidation cell.

Data acquisition setup for Pneumatic consolidation basic data acquisition. Test data is stored in the Data acquisition setup for Pneumatic consolidation
using analog transducer and Logger device and can be downloaded to a USB drive via using digital indicator and Logger
the machine's FRONT USB port or the data can be
HM-2432A.3F ConMatic 32 TSF HM-2432A.3F ConMatic 32 TSF
or or transferred to a computer via the LAN port. or or
HM-2432AM.3F ConMatic 32 Kgf/cm² A second USB port located on the back of the HM-2432AM.3F 32 Kgf/cm²
HM-1220.XX Fixed ring consolidation cell machine can also be used to power a wireless HM-1220.XX Fixed ring consolidation cell
access point, which can provide a wireless hook-up
HM-2310.04 Strain transducer 0.4" (10mm) Digital indicator 1" x .0001"
with a computer, if no LAN is available. HM-4470.10
HM-2310BR Strain transducer bracket (25 x 0.002 mm)
Touch-Screen Controller provides:
Humboldt Logger 4 channel HM-4470C Digital Indicator Cable, 6 ft.
HM-5320.3F • 4-channel data acquisition
analog data acquisition • Hi-res, 7", waterproof, touch-screen provides Humboldt Logger 4 channel
HM-5330.3F
HM-5100SW NEXT consolidation module total control and real-time graphical display digital data acquisition
of tests HM-5100SW NEXT consolidation module
When used with one of Humboldt's 4-channel data
• Machine/Test control and data acquisition
loggers, the HM-2432A Consolidation machine even a complete geotechnical lab, Humboldt's
via touch-screen
becomes a semi-automatic pneumatic loading NEXT software provides a complete solution for
• Calibration of channels to load cell and
machine, which with the touch-screen monitor of the calibration, acquisition, recording and presen-
transducer
the data logger provides test control and live test tation of consolidation testing data in data tabula-
• Real-time graphical chart and numerical
monitoring in either a stand-alone or comput-
display of tests via touch-screen display tion and graphic chart formats.
er-controlled configuration. While pneumatic loads
• Effective sampling rate of 50 readings • Machine control, and data acquisition
are controlled by manual valve controls located on
per second via networked computer
the front panel of the consolidation machine, the
• Stores up to 1000 tests with 3000 • Provides the ability to use Next Software's,
data logger provides four (4) integral and inde-
points per test advanced test-specific modules
pendent data acquisition channels, which can be
• 2 USB ports. One in front for data transfer • Real-time graphical chart and numerical
utilized in stand-alone configurations or accessed
and the rear port is for powering a wireless display of tests via computer display
through a LAN-networked computer using Hum-
access point. • Effective sampling rate of 50 readings
boldt's NEXT Basic software.
Computer Control per second
Stand-Alone Control NEXT Basic software is included with the ConMatic • Stores unlimited tests with up to
The touch-screen controller provides you with full, consolidation machine. This software provides 3000 points per test.
graphical monitoring of all testing functions in a robust machine control, calibration, data acquisi- • Up to 255 individual tests can be run
stand-alone application, while maintaining full tion and report generation for those using a com- simultaneously from a single PC
computer control when desired. This seven-inch, puter to control consolidation testing operations. • Provides advanced graphing capabilities
waterproof screen provides at-a-glance monitoring In addition, operators have the ability to view and • Provides full-unit customization
of testing functions, in a real-time graphical display, control testing operations from a PC in the lab, in • Reports can also be exported to Excel or
without the use of a computer, building upon Hum- the next room or at a different location, while also a CSV file, if desired, and, we can provide
boldt's dedication to modular, stand-alone data providing report generating capabilities using the custom integration/export solutions for LIMS,
acquisition. consolidation test-specific software module. EQuIS, gINT, etc.
Now, in a stand-alone application, you will be able So, whether you are controlling a single consolida-
to run tests and display results while viewing tabu- tion machine, controlling multiple machines or
lation, basic x-y graphs and instrument readings in
real-time during the test, using user-defined,

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

106
Consolidation SOIL MECHANICS

Specifications
Load Capacity 48 tsf (4,597 kPa)
Beam Ratios 9:1, 10:1 and 11:1
Heavy-duty aluminum
Frame frame with stainless
Construction steel vertical, horizontal
and beam support rods
Anodized aluminum with
Cell Platform locating pins for center-
ing cells.
Dimension 7.75" x 32" x 19.5"
(W x D x H) (197 x 812 x 495 mm)
Weight 47 lbs. (21kg)

Consolidation (Dead-Weight) Typical Setups:

Part # Description
Dead weight consolidation
Dead weight consolidation
HM-1100A
frame-front load
HM-1100A HM-1120* Weight set, 16 TSF
or or
HM-1123 Weight set, 64kg

Dead-Weight Consolidation Frame HM-1220.XX Fixed ring consolidation cell

ASTM: D2435, D4546, AASHTO: T216, BS:1377:5 H-4471CC Dial gauge, 0.5" X .0001" CC
or or
Able to survive in even the harshest laboratory H-4465.12CC (12 x 0.002mm) CC
environments, the HM-1100A will provide you with
reliable service day-in and day-out. The design fea-
tures a rugged frame manufactured from aluminum
with stainless steel vertical rods, horizontal cross
arms and beam support rods. The load arm incor-
porates 9:1, 10:1, and 11:1 beam ratios for greater
flexibility and loading weight requirements. Using
the 10:1 ratio on 2.5" (63 mm) diameter samples,
the system is capable of producing loads up to 48
tsf (4,597 kPa).
• Triple beam ratios minimize loading weight
requirements
• 48 tsf (5,148 kPa) maximum load capacity
• Aluminum and stainless steel construction for
corrosion resistance and long life
• Wide range of consolidation cells available
HM-1100.1 HM-1100.3
in fixed ring, floating ring, permeability and
back-pressure designs Consolidation Frame Stands
• Loading weights available in both, tsf and kg Butcher block table-top with heavy-duty, steel
versions frame designed to provide stable mounting plat-
• Basic unit comes with standard, mechanical dial form for HM-1100A consolidation frames. Con-
gauges solidation frames can also be bolted to the table
• The HM-1100A is also available with our Data and the table can be bolted to floor for increased
Loggers with digital indicators or strain transduc- stability.
ers (LSCT). See next page. Single-Station Frame Stand HM-1100.1
Dead-Weight Consolidation Frame HM-1100A Triple-Station Frame Stand HM-1100.3
Shipping wt. HM-1100.1: 50 lb (23kg), HM-100.3: 115 lb
Shipping wt. 75 lb (34kg)
(52.1kg)

Part Numbers ending in .XX require a size code to be entered referring to the sample size to be tested.
For Consolidation samples, sizes are: .20 = 2.0"; .242 = 2.42"; .25 = 2.5"; .30 = 3.0"; .40 = 4.0"; .50 = 50mm; .70 = 70mm;
.75 = 75mm, and .100 = 100mm. *Metric applications: Use HM-1122 weight set (32kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 107
SOIL MECHANICS Consolidation
Typical Consolidation Data Acquisition Setups Using Humboldt Data Loggers

Stand-Alone Control

Computer Control
Dead weight consolidation Dead weight consolidation
w/ analog data acquisition basic data acquisition. Test data is stored in the w/ digital data acquisition
Dead weight consolidation device and can be downloaded to a USB drive via Dead Weight consolidation
HM-1100A HM-1100A
frame-front Load the machine's FRONT USB port or the data can be frame-front load
HM-1120 or Weight set, 16 TSF transferred to a computer via the LAN port. HM-1120 or Weight set, 16 TSF
HM-1123 or Weight set, 64 kg A second USB port located on the back of the HM-1123 or Weight set, 64 kg
HM-1220.XX Fixed ring consolidation cell machine can also be used to power a wireless
HM-1220.XX Fixed ring consolidation cell
access point, which can provide a wireless hook-up
HM-2310.04 Strain transducer 0.4" (10mm) Digital indicator 1" x .0001"
with a computer, if no LAN is available. HM-4470.10
HM-2310BR Strain transducer bracket (25 x 0.002 mm)
Touch-Screen Controller provides:
Logger 4-CH analog • 4-channel data acquisition HM-4470C Digital Indicator Cable, 6 ft.
HM-5320.3F
data acquisition • Hi-res, 7", waterproof, touch-screen provides Logger 4-CH digital
HM-5330.3F
NEXT consolidation total control and real-time graphical display data acquisition
HM-5100SW of tests
reporting software NEXT consolidation
• Machine/Test control and data acquisition HM-5100SW
reporting software
When used with one of Humboldt's 4-channel via touch-screen
data loggers, the HM-1100 Consolidation frame • Calibration of channels to load cell and even a complete geotechnical lab, Humboldt's
becomes a semi-automatic machine, which with transducer NEXT software with the consolidation, test-specific
the touch-screen monitor of the data logger pro- • Real-time graphical chart and numerical module provides a complete solution for the cali-
vides test control and live test monitoring in either display of tests via touch-screen display bration, acquisition, recording and presentation of
a stand-alone or computer-controlled configura- • Effective sampling rate of 50 readings consolidation testing data in data tabulation and
tion. While loads are still controlled by manually per second graphic chart formats.
adding weights, the data logger provides four (4) • Stores up to 1000 tests with 3000 • Data acquisition via networked computer
integral and independent data acquisition chan- points per test • Provides the ability to use NEXT Software's,
nels, which can be utilized in stand-alone config- • 2 USB ports. One in front for data transfer advanced consolidation test-specific modules
urations or accessed through a LAN-networked and the rear port is for powering a wireless • Real-time graphical chart and numerical
computer using Humboldt's NEXT Basic software. access point. display of tests via computer display
Stand-Alone Control Computer Control • Effective sampling rate of 50 readings
The touch-screen controller provides you with full, NEXT Basic software is included with the Humboldt per second
graphical monitoring of all testing functions in a Data Loggers. This software can be enhanced • Stores unlimited tests with up to
stand-alone application, while maintaining full with the Consolidation, test-specific module, 3000 points per test.
computer control when desired. This seven-inch, HM-5100SW to provide calibration, data acquisi- • Up to 255 individual tests can be run
waterproof screen provides at-a-glance monitoring tion and report generation for those using a com- simultaneously from a single PC
of testing functions, in a real-time graphical display, puter to control consolidation testing operations. • Provides advanced graphing capabilities
without the use of a computer, building upon Hum- In addition, operators have the ability to view test- • Provides full-unit customization
boldt's dedication to modular, stand-alone data ing operations from a PC in the lab, in the next • Reports can also be exported to Excel or
acquisition. room or at a different location, while also providing a CSV file, if desired, and, we can provide
Now, in a stand-alone application, you will be able report generating capabilities using the consolida- custom integration/export solutions for LIMS,
to run tests and display results while viewing tabu- tion test-specific software module. EQuIS, gINT, etc.
lation, basic x-y graphs and instrument readings in So, whether you are controlling a single consolida-
real-time during the test, using user-defined, tion machine, controlling multiple machines or

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

108
Consolidation SOIL MECHANICS
Fixed Ring Consolidation Cell Floating Ring Consolidation Cell Fixed Ring Permeability Cell
ASTM: D2435, D4546, AASHTO: T216, BS:1377:5 ASTM: D2435, D4546, AASHTO: T216, BS:1377:5 ASTM: D2435, D4546, AASHTO: T216, BS:1377:5
Complete cell assembly features stainless steel Complete cell assembly features stainless steel Similar in construction to a fixed ring cell with the
construction and self-trimming cutter ring. Cutter construction with self-trimming cutter ring. Sim- exception that the saturated sample and water
ring rests inside clamping ring on lower porous ilar in construction to a fixed ring cell with the are sealed from the atmosphere. Complete cell
stone, which is larger than the sample. The top exception that the lower porous stone fits inside assembly features stainless steel construction
porous stone and loading pad rest on the sample. the cutter ring and can move vertically within it. and self-trimming cutter ring. Base features outlet
The assembly is fixed on the cell base and enclosed The sample ring is also free to move vertically. port and 10cc pipette for monitoring water level.
within an acrylic cylinder open to the atmosphere, The cell comes complete with all the parts illus- The cell comes complete with all the parts illus-
which permits saturation of the sample. The cell trated in the drawing below. trated in the drawing below, as well as a pipette.
comes complete with all the parts illustrated in the Floating Ring Consolidation Cell See Chart Fixed Ring Permeability Cell See Chart
drawing below. Shipping wt. 6 lb (2.27kg) Shipping wt. 12 lb (5.4kg)
Fixed Ring Consolidation Cell See Chart
Shipping wt. 9 lb (4kg)

Fixed Ring Floating Ring Fixed Ring

Consolidation Cell Consolidation Cell Permeability Cell
2.0" HM-1220.20 2.0" HM-1210.20 2.0" HM-1230.20
2.42" HM-1220.242 2.42" HM-1210.242 2.42" HM-1230.242
2.5" HM-1220.25 2.5" HM-1210.25 2.5" HM-1230.25
3.0" HM-1220.30 3.0" HM-1210.30 3.0" HM-1230.30
4.0" HM-1220.40 4.0" HM-1210.40 4.0" HM-1230.40
50mm HM-1220.50 50mm HM-1210.50 50mm HM-1230.50
70mm HM-1220.70 70mm HM-1210.70 70mm HM-1230.70
75mm HM-1220.75 75mm HM-1210.75 75mm HM-1230.75
100mm HM-1220.100 100mm HM-1210.100 100mm HM-1230.100

Load Pad Load Pad

Acrylic Cylinder Upper Stone
Upper Stone

Upper O-ring
Cutter Ring
Locking Nut Cutter Ring
Lower Stone
Load Pad
Upper Stone Acrylic Cylinder Upper Port
Connection
Locking Nut Lifting Knob Clamping Ring
Lower Port
Connection
Cutter Ring Lower Stone
Clamping Ring O-ring
Centering Ring
Post Post
Lower Stone Lower O-ring

Base
Base Base
O-ring

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 109
SOIL MECHANICS Consolidation
Consolidation Cell Components
2.0" 2.42" 2.5" 3.0" 4.0" 50mm 70mm 75mm 100mm
Load pad HM-1220.20.10 HM-1220.24.10 HM-1220.25.10 HM-1220.30.10 HM-1220.40.10 HM-1220.50.10 HM-1220.70.10 HM-1220.75.10 HM-1220.100.10

HM-1220.25.11*
Upper stone HM-4184.1985 HM-4184.240 HM-4184.2985 HM-4184.3985 HM-4184.1955 HM-4184.274 HM-4184.2940 HM-4184.3925
HM-4184.2485
Lower stone (floating) HM-4184.1985 HM-4184.240 HM-4184.2485 HM-4184.2985 HM-4184.3985 HM-4184.1955 HM-4184.274 HM-4184.2940 HM-4184.3925
Lower stone
HM-4184.331 HM-4184.331 HM-4184.331 HM-4184.331 HM-4184.4375T HM-4184.331 HM-4184.331 HM-4184.331 HM-4184.4375T
(fixed & permability)
Acrylic cylinder (fixed) HM-1220.25.2 HM-1220.25.2 HM-1220.25.2 HM-1220.25.2 HM-1220.40.2 HM-1220.25.2 HM-1220.25.2 HM-1220.25.2 HM-1220.40.2
Acrylic cylinder (floating) HM-1210.25.2 HM-1210.25.2 HM-1210.25.2 HM-1210.25.2 HM-1210.40.2 HM-1210.25.2 HM-1210.25.2 HM-1210.25.2 HM-1210.40.2
Centering ring (floating) HM-1210.20.12 HM-1210.24.12 HM-1210.25.12 HM-1210.30.12 HM-1210.40.12 HM-1210.50.12 HM-1210.70.12 HM-1210.75.12 HM-1210.100.12
Clamping ring (permability) HM-1230.20.9 HM-1230.24.9 HM-1230.25.9 HM-1230.30.9 HM-1230.40.9 HM-1230.50.9 HM-1230.70.9 HM-1230.75.9 HM-1230.100.9
Clamping ring (fixed) HM-1220.20.9 HM-1220.24.9 HM-1220.25.9 HM-1220.30.9 HM-1220.40.9 HM-1220.50.9 HM-1220.70.9 HM-1220.75.9 HM-1220.100.9
Base (floating & permability) HM-1230.25.1 HM-1230.25.1 HM-1230.25.1 HM-1230.25.1 HM-1230.40.1 HM-1230.25.1 HM-1230.25.1 HM-1230.25.1 HM-1230.40.1
Base (fixed) HM-1220.25.1 HM-1220.25.1 HM-1220.25.1 HM-1220.25.1 HM-1220.40.1 HM-1220.25.1 HM-1220.25.1 HM-1220.25.1 HM-1220.40.1
Cutter ring (all) HM-1220.20.8 HM-1220.24.8 HM-1220.25.8 HM-1220.30.8 HM-1220.40.8 HM-1220.50.8 HM-1220.70.8 HM-1220.75.8 HM-1220.100.8
Lower o-ring
HM-003053 HM-003053 HM-003053 HM-003053 HM-003056 HM-003053 HM-003053 HM-003053 HM-003056
(floating & permability)

Lower o-ring (fixed) HM-003052 HM-003052 HM-003052 HM-003052 HM-003024 HM-003052 HM-003052 HM-003052 HM-003024
Upper o-ring (permability) HM-003057 HM-003058 HM-003054 HM-003059 HM-003060 HM-003057 HM-003061 HM-003062 HM-003063
Post (all) HM-1220.25.3 HM-1220.25.3 HM-1220.25.3 HM-1220.25.3 HM-1220.25.3 HM-1220.25.3 HM-1220.25.3 HM-1220.25.3 HM-1220.25.3
Locking nut (all) HM-1220.25.5 HM-1220.25.5 HM-1220.25.5 HM-1220.25.5 HM-1220.25.5 HM-1220.25.5 HM-1220.25.5 HM-1220.25.5 HM-1220.25.5
Lifiting knob (all) HM-1220.25.6 HM-1220.25.6 HM-1220.25.6 HM-1220.25.6 HM-1220.25.6 HM-1220.25.6 HM-1220.25.6 HM-1220.25.6 HM-1220.25.6
Port connection
upper (permability) HM-003027 HM-003027 HM-003027 HM-003027 HM-003027 HM-003027 HM-003027 HM-003027 HM-003027

Port connection
lower (permability) HM-003055 HM-003055 HM-003055 HM-003055 HM-003055 HM-003055 HM-003055 HM-003055 HM-003055

Filter paper HM-4189.20 HM-4189.25 HM-4189.25 HM-4189.30 HM-4189.40 HM-4189.20 HM-4189.28 HM-4189.30 HM-4189.40

Calibration disk
(used for consolidation or HM-1220.20.4 HM-1220.24.4 HM-1220.25.4 HM-1220.30.4 HM-1220.40.4 HM-1220.50.4 HM-1220.70.4 HM-1220.75.4 HM-1220.100.4
round shear box.)

*this stone has a threaded stud; order HM-4184.2485 if no stud is desired.

Trimming Turntable for 2.5" Consolidation Specimens

Trims samples down to correct sizing.
Trimming Turntable, 2.5" Consolidation HM-1240.25
HM-1120 Shipping wt. 5lb (2.27kg)
HM-1240.25

Individual Weights
TSF Weight 0.125 (1/8) 0.25 (1/4) 0.50 (1/2) 1.0 2.0 4.0
Model No. HM-1120.125 HM-1120.250 HM-1120.500 HM-1120.1 HM-1120.2 HM-1120.4
Kg Weight 0.5 kg 1.0 kg 2.0 kg 4.0 kg 5.0 kg 8.0 kg 10.0 kg
Model No. HM-1122.05 HM-1122.1 HM-1122.2 HM-1122.4 HM-1122.5 HM-1122.8 HM-1122.10

Weight Set Set Includes Model No. Ship. Wt.

16 TSF Set includes: (2) .125 TSF, (1) .25 TSF, (1) .50 TSF, (1) 1.0 TSF, (1) 2.0 TSF, (3) 4.0 TSF weights HM-1120 140 lbs. (64kg)

32 TSF Set includes: (2) .125 TSF, (1) .25 TSF, (1) .50 TSF, (1) 1.0 TSF, (1) 2.0 TSF, (7) 4.0 TSF weights HM-1121 275 lbs. (125kg)

32 kg Set includes: (4) 1 kg, (3) 4 kg, (2) 8 kg weights HM-1122 73 lbs. (33.1kg)

50 kg Set includes: (3) 1 kg, (1) 2 kg, (1) 5 kg, (4) 10 kg weights HM-1125 110 lbs. (50kg)

64 kg Set includes: (4) 1 kg, (5) 4 kg, (5) 8 kg weights HM-1123 150 lbs. (68kg )

88 kg Set includes: (4) 1 kg, (5) 4 kg, (8) 8 kg weights HM-1124 130 lbs. (59kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

110
Direct Shear SOIL MECHANICS
E L I T E S E R I E S
Direct Shear
Direct/Residual Shear Apparatus Elite Series Direct Shear machines are built with When operated from a networked computer the
ASTM: D3080; AASHTO: T236, BS:1377:7 durable, high-quality components and feature the NEXT software provides robust machine and test
Humboldt's Elite Series Direct Shear machines use of a stepper motor, precision gears and gear control, and report generation. It also allows the
provide the materials testing lab with a choice box to ensure smooth and reliable operation, as ability to control and monitor multiple machines
of a pneumatic loading and several dead-weight well as precise results. from a single computer.
machines for direct shear testing applications. The In stand-alone mode, these direct shear machines Pneumatic Direct/Residual Shear Apparatus
HM-5760 is a pneumatic loading machine, which provide a 7" (178mm) touch-screen controller, giv- ASTM: D3080; AASHTO: T236, BS:1377:7
with its touch-screen monitor provides test control ing you finger-tip control of your testing processes, The Humboldt HM-5760 Direct/Residual Shear
and live test monitoring in either a stand-alone or as well as providing real-time, visual views of your apparatus is a fully-automated system utilizing
computer-controlled configuration. data in both tabular and graphic formats. These pneumatic loading to apply vertical loads to a sam-
The HM-5750 machines are dead-weight loading new waterproof, touch screens provide colorful, ple eliminating the need for loading weights used
machines, which come in an analog and a digital at-a-glance monitoring of testing functions without in dead weight-type systems.
configuration. These machines also take advan- the use of a computer. Operators can see all the The microprocessor-based system features a step-
tage of our touch-screen monitor to provide test data in several formats at the machine while the per-motor drive system and a 7" touch-screen dis-
control and live test monitoring in either a stand- test is running. Data can then be viewed simulta- play that allows the operator to control and moni-
alone or computer-controlled configuration. neously or downloaded later to a computer in the tor all test functions.
lab, in the next room or at a different location, while
These machines provide four (4) integral and inde- Like all Elite Series machines, the HM-5760 is
also providing report generation capabilities from
pendent data acquisition channels, which can be built around Humboldt's integral, 4-channel data
within Humboldt's NEXT software or our enhanced
utilized in stand-alone configurations or accessed logger with touch-screen control, which allows
HM-5700SW Direct Shear software module.
through
rough a LAN-networked
LAN networked computer using Hum-
Hum the HM-5760 to be used as a standalone device
boldt's
oldt's Next Software. capable of full test control and data logging. It can
also be controlled by a networked computer at any
location with access to the network.
The HM-5760 is supplied complete with two 2,000
lbf (10kN) capacity load cell; 1" (25.4mm) hori-
zontal strain transducer, a 0.4" (10.2mm) vertical
Counter-balance strain transducer and Humboldt's NEXT Direct
device for ASTM Shear software module. Shear box assemblies and
D3080 compliance. related accessories are not included and should be
Not available ordered separately. (See page 115)
anywhere else. Pneu. Direct/Residual Shear Apparatus HM-5760.3F
Also available as Shipping wt. 168 lb (76kg)
a retrofit kit.
HM-2560A.1 HM-5760.3F Specifications:
Horiz. movement 2" (50mm) Maximum
Horiz. shear force 2000 lbf (10kN)
Vertical load 2000 lbf (10kN)
Data Channels 4
0.00001 to 0.49999 in./min.
Speed Range
0.00001 to 12.9999 mm/min.
1000 tests and up to 3000
Data storage
readings per test
Dimensions 30" x 15.5" x 22"
(L x D x H) (760 x 394 x 558mm)
110/220V 50/60Hz -
Voltage
6.5amps
HM-5760.3F

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 111
SOIL MECHANICS Direct Shear
Dead-Weight Direct/
Direct/Residual Shear Machines

Counte
Counter-balance
HM-5750A.3F device for ASTM HM-5750D.3F
D3080 compliance.
Not av
available
anywhe
anywhere else.
Also av
available as
a retrofi
retrofit kit.
HM-25
HM-2560A.1

Direct/Residual Shear Apparatus, Analog Direct/Residual Shear Apparatus, Digital

HM-5750A & D Specifications:
ASTM: D3080; AASHTO: T236, BS:1377:7 ASTM: D3080; AASHTO: T236, BS:1377:7
Horiz. movement 2" (50mm) Maximum
The HM-5750A Direct Shear machine is an eco- The HM-5750D Direct Shear machine is an eco-
nomical choice for performing direct/residual shear nomical choice for performing direct/residual shear Horiz. shear force 2000 lbf (10kN)
tests utilizing the dead-weight method and analog tests utilizing the dead-weight method and digital Vertical load 2000 lbf (10kN)
measuring devices. The microprocessor-based sys- measuring devices. The microprocessor-based sys-
Data Channels 3
tem features a stepper-motor drive system and a tem features a stepper-motor drive system and a
7" touch-screen display that allows the operator to 7" touch-screen display that allows the operator to 0.00001 to 0.49999 in./min.
Speed Range
control and monitor all test functions. control and monitor all test functions. 0.00001 to 12.9999 mm/min.
Like all Elite Series machines, the HM-5750A Like all Elite Series machines, the HM-5750D 1000 tests and up to 3000
Data storage
is built around Humboldt's integral, 4-channel is built around Humboldt's integral, 4-channel readings per test
data logger with touch-screen control, which data logger with touch-screen control, which Dimensions 40" x 10" x 45"
allows the HM-5750A to be used as a stand- allows the HM-5750D to be used as a stand- (L x D x H) (1016 x 254 x 1143mm)
alone device capable of full test control and alone device capable of full test control and
data logging. It can also be controlled by a net- data logging. It can also be controlled by a net- 110/220V 50/60Hz -
Voltage
worked computer at any location with access worked computer at any location with access 6.5amps
to the network. The carriage accepts shear box to the network. The carriage accepts shear box
squares up to 4.0" (100mm) internal dimen- squares up to 4.0" (100mm) internal dimen-
sion. Forward and reverse measurements permit sion. Forward and reverse measurements permit
residual shear testing as standard. A built-in safety residual shear testing as standard. A built-in safety
feature prevents the overloading of the load mea- feature prevents the overloading of the load mea-
suring system. suring system.
The HM-5750A is supplied complete with a 2,000 The HM-5750D is supplied complete with a
lbf (10kN) capacity load cell; 1" (25.4mm) hori- 2,200 lbf (10kN) capacity load ring and two 1.0"
zontal strain transducer, and a 0.4" (10.2mm) ver- x 0.0001" (25.40 x 0.002mm) digital indicators.
tical strain transducer. Shear box assemblies and Shear box assemblies and related accessories are
related accessories are not included and should be not included and should be ordered separately.
ordered separately. (See page 115) (See page 115)
Direct Shear Apparatus, Analog HM-5750A.3F Direct Shear Apparatus, Digital HM-5750D.3F
Shipping wt. 330 lb (149kg) Shipping wt. 300 lb (136kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

112
Direct Shear SOIL MECHANICS

Stand-Alone or Computer Control

Stand-Alone Control • Real-time graphical chart and numerical

Humboldt's touch-screen controller provides you display of tests via touch-screen display
with full, graphical monitoring of all testing func- • Effective sampling rate of 50 readings
tions in a stand-alone application, while maintain- per second • Stores unlimited tests with up to
ing full computer control when desired. • Stores up to 1000 tests with 3000 3000 points per test.
Now you can have full, finger-tip control and mon- points per test • Up to 255 individual tests can be run
itoring of all testing functions with Humboldt's • 2 USB ports. One in front for data transfer simultaneously from a single PC
touch-screen controller, found on Elite Series and the rear port is for powering a wireless • Provides advanced graphing capabilities
Direct Shear machines. This seven-inch, water- access point. • Provides full-unit customization
proof screen provides at-a-glance monitoring of • Reports can also be exported to Excel or
Computer Control
testing functions, in a real-time graphical display, a CSV file, if desired, and, we can provide
HUmboldt's NEXT Basic software is included
without the use of a computer, building upon Hum- custom integration/export solutions for LIMS,
with the HM-5755, HM-5760, HM-5750A and the
boldt's dedication to modular, stand-alone data EQuIS, gINT, etc.
HM-5750D machines. In addition, the HM-5760
acquisition.
Direct Shear machine includes the enhanced
Now, in a stand-alone application, you will be able Direct Shear module, HM-5700SW. This software Controller Specifications:
to run tests and display results while viewing tab- provides calibration, data acquisition and report Display (Resistive Touch) 7" (178mm) VGA (480 x 800)
ulation, basic x-y graphs and instrument readings generation for those using a computer to control Real-time test data Graphic and tabulation
in real-time during the test, using user-defined, consolidation and shear testing operations.
Processor Dual 32-bit ARM
basic data acquisition. Test data is stored in the
In addition, operators have the ability to view and
device and can be downloaded to a USB drive via RAM 64MB
control testing operations from a PC in the lab, in
the machine's FRONT USB port or the data can be
the next room or at a different location, while also Memory, non-volatile 4GB
transferred to a computer via the LAN port.
providing report generating capabilities using the Analog to digital converter 24 bit
A second USB port located on the back of the direct-shear test-specific software module.
Data acquisition 3-4 Channels
machine can also be used to power a wireless
So, whether you are controlling a single direct-
access point, which can provide a wireless hook-up Logging speed up to 50 readings per second
shear machine, controlling multiple machines or
with a computer, if no LAN is available. Multi-test storage 1000
even a complete geotechnical lab, Humboldt's
Touch-Screen Controller provides: NEXT software, in conjunction with Humboldt's Points per test 3000
• 3 or 4 channel data acquisition Direct Shear machines, provides a complete export data, import/export
• Hi-res, 7", waterproof, touch-screen solution for the calibration, acquisition, record- USB port (front)
calibration data, WiFi
provides total control and real-time ing and presentation of direct shear testing data provides external power
graphical display of tests USB port (back)
in data tabulation and graphic chart formats for wireless access point
• Machine/Test control and data acquisition
• Machine control, and data acquisition Ethernet connection for network connectivity
via touch-screen
via networked computer Emergency stop Large button
• Control all channels at the same time
• Provides the ability to use Next Software's, 24-bit differential
• Calibration of channels to load cell and 4
advanced test-specific modules analog to digital converter
transducer
• Real-time graphical chart and numerical Ambient temperature
1
display of tests via computer display sensor

• Effective sampling rate of 50 readings per Limit switches 2

second Firmware Update Ethernet or flash drive

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 113
SOIL MECHANICS Direct Shear
Typical Test Setup for HM-5760 and HM-5755
Part # Description
Pneumatic Direct Shear with analog inputs
(includes a 2,000 lbf (10kN) capacity load cell; 1"
HM-5760.3F
(25.4mm) horizontal strain transducer, and a 0.4"
(10.2mm) vertical strain transducer)
HM-5700SW NEXT Direct Shear software module (included with HM-5760)
HM-2751.XX(S/D) Shear box assembly (specify size)
HM-2702.XX(S/D) Shear box cutter (specify size)
HM-2703.XX(S/D) Dolly/tamper (specify size)

Typical Test Setup for HM-5750A

Part # Description
Dead-weight Direct Shear with analog inputs
(includes a 2,000 lbf (10kN) capacity load cell; 1"
HM-5750A.3F
(25.4mm) horizontal strain transducer, and a 0.4"
(10.2mm) vertical strain transducer)
HM-5700SW NEXT Direct Shear software module
HM-1120 or
16 TSF or 50 kg weight set
HM-1125
HM-2751.XX(S/D) Shear box assembly
HM-2702.XX(S/D) Shear box cutter
HM-2703.XX(S/D) Dolly/tamper

Typical Test Setup for HM-5750D

Part # Description
Dead-weight Direct Shear with digital inputs
HM-5750D.3F (a 2,200 lbf (10kN) capacity load ring and two 1.0"
x 0.0001" (25.40 x 0.002mm) digital indicators)
HM-5700SW NEXT Direct Shear software module
HM-1120 or
16 TSF or 50 kg weight set
HM-1125
HM-2751.XX(S/D) Shear box assembly
HM-2702.XX(S/D) Shear box cutter
HM-2703.XX(S/D) Dolly/tamper

Typical Test Setup for HM-5750 & HM-5750M

Part # Description
Dead-weight Direct Shear with load ring
(a 2,200 lbf (10kN) capacity load ring,
HM-5750D.3F
1.0" x 0.001" (25.4 x 0.01mm) and
0.5" x 0.0001" (12 x 0.002mm) dial indicator
HM-1120 or
16 TSF or 50 kg weight set
HM-1125
HM-2751.XX(S/D) Shear box assembly
HM-2702.XX(S/D) Shear box cutter
HM-2703.XX(S/D) Dolly/tamper

Part Numbers ending in .XX require a size code to be entered referring to the sample size to be tested.
For direct/residual shear samples, sizes are: .20 = 2.0"; .242 = 2.42"; .25 = 2.5"; .40 = 4.0"; .50 = 50mm; .60 = 60mm,
and .100 = 100mm. NOTE: use "S" for square and"D" for round samples.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

114
Direct
Dire
ect Shear
S r SOIL MECHANICS

Counter-balance
HM-5755.3F device for ASTM
D3080 compliance.
Not available
anywhere else.
Also available as
a retrofit kit.
HM-2560A.1 HM-5750.3F

Pneumatic Direct/Residual Shear Apparatus The HM-5755 is supplied complete with a 2,000 Direct/Residual Shear Apparatus, Manual
ASTM: D3080; AASHTO: T236, BS:1377:7 lbf (10kN) capacity load cell; 1" (25.4mm) horizon- ASTM: D3080; AASHTO: T236, BS:1377:7
The HM-5755 is a semi-automatic pneumatic load- tal strain transducer, a 0.4" (10.2mm) vertical strain The HM-5750 and HM-5750M Direct Shear
ing machine, which with its touch-screen monitor transducer and Humboldt's NEXT software. Shear machines are an economical choice for performing
provides test control and live test monitoring in box assemblies, Humboldt's NEXT Direct Shear direct/residual shear tests utilizing the dead-weight
either a stand-alone or computer-controlled con- module and related accessories are not included method with load rings and dial gauges.
figuration. With the HM-5755, pneumatic loads and should be ordered separately. These models include the carriage, stand, verti-
are controlled by manual valve controls located cal load hanger and a balanced lever loading arm
on the front panel for easy use. The HM-5755 HM-5755 Specifications: with a 10:1 ratio that reduces the weight required
also provides four (4) integral and independent Horiz. movement 1" (25.4mm) maximum to perform tests. The micro-processor-based sys-
data acquisition channels, which can be utilized in tem features a stepper motor drive system and 7"
Horiz. shear force 2,000 lbf (10kN)
stand-alone configurations or accessed through a touch-screen display.
LAN-networked computer using Humboldt's Next Vertical load 2,000 lbf (10kN) The carriage accepts shear box squares up
Software.
0.00001 to 0.49999 to 4.0" (100mm) internal dimension. For-
In stand-alone mode, the HM-5755 direct shear Speed range in/min. (0.00001 to ward and reverse measurements permit
machine provides a 7" (178mm) touch-screen con- 12.99999 mm/min.) residual shear testing as standard. A built-in safety
troller, giving you finger-tip control of your testing feature prevents the over travel of the load mea-
Voltage 110/220 VAC 50/60HZ
processes, as well as providing real-time, visual suring system.
views of your data in both tabular and graphic Current 6.5 amps
The HM-5750 and HM-5750M are supplied com-
formats. These new waterproof, touch screens Analog to digital 24 bit plete with a 2,000 lbf (10kN) capacity load ring,
provide colorful, at-a-glance monitoring of testing
Data storage 3000 readings 1.0" x 0.001" (25.4 x 0.01mm) and 0.5" x 0.0001"
functions without the use of a computer. Opera- (12 x 0.002mm) dial indicator. Shear box assem-
tors can see all the data in several formats at the Data collection rate 50 readings per second blies and related accessories are not included and
machine while the test is running. Data can then
Ethernet connection for network connectivity should be ordered separately.
be viewed simultaneously or downloaded later
to a computer in the lab, in the next room or at a 30" x 15.5" x 22" HM-5750 & HM-5750M Specifications:
Dimension
different location, while also providing report gen- (L x D x H)
(W x D x H) Horiz. movement 2" (50mm) Maximum
eration capabilities from within Humboldt's NEXT (760 x 394 x 558mm)
software or our enhanced HM-5700SW Direct Horiz. shear force 2000 lbf (10kN)
Weight 140 lb (64 kg)
Shear software module. Vertical load 2000 lbf (10kN)
When operated from a networked computer the 0.00001 to 0.49999 in./min.
Pneumatic Direct/Residual Shear HM-5755.3F Speed Range
NEXT software provides robust machine and test 0.00001 to 12.9999 mm/min.
Shipping wt. 200 lb (90.7kg)
control, and report generation. It also allows the
Dimensions 40" x 10" x 45"
ability to control and monitor multiple machines
(L x D x H) (1016 x 254 x 1143mm)
from a single computer.
110/220V 50/60Hz -
Pneumatic Direct Shear Requirements: Voltage
6.5amps
AC Supply: 110/220 VAC 50/60 Hz, 5 Amp Air Supply: Air Supply:
Clean and dry (air filter, water trap), minimum: 100 psi (700kpa) Direct Shear Apparatus, Manual HM-5750.3F
continuous air supply, 10CFM (0.3 m3/min) Direct Shear Apparatus, Manual Metric HM-5750M.3F
Shipping wt. 330 lb (149kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 115
SOIL MECHANICS Direct Shear
Upgrade for HM-2560A Pneumatic Direct/Residual Shear Apparatus
ASTM: D3080; AASHTO: T236, BS:1377:7
Upgrade your existing HM-2560A Direct Shear machine to incorporate Humboldt’s
Elite Series, touch-screen controller. This upgrade can also be done with Gilson Direct
Shear machines. This upgrade requires your existing machine to be sent to Humboldt
for refurbishment and upgrade. Contact Humboldt for details.
Direct Shear Apparatus, Manual HM-5560.3F
Shipping wt. 200 lb (90.7kg)

Accessory Model
Cutter HM-2702.XXS/D
Dolly tamper HM-2703.XXS/D

HM-2701.25D Porous plate HM-2704.XXS/D

HM-2701.60S
HM-2751.60S HM-2751.25D Calibration disk, square HM-2755.XXS
Calibration disk, round* HM-1220.XX.4
HM-2750, HM-5750, HM-5755, HM-5760 HM-2700, HM-5560, HM-2560 & Gilson
Shearbox Assemblies Shearbox Assemblies Replacement Pressure Ball
HM-001076
Round Model Round Model 5/8" 440 Stainless Steel
2.0" HM-2751.20D 2.0" HM-2701.20D Screw, Black Head HM-003274
2.42" HM-2751.24D 2.42" HM-2701.24D Screw, Red Head HM-003276
2.5" HM-2751.25D 2.5" HM-2701.25D Screw HM-003275
4.0" HM-2751.40D 4.0" HM-2701.40D Plastic Retaining Screw HM-003275A
50mm HM-2751.50D 50mm HM-2701.50D Plastic Retaining Screw (old) HM-2703.1
60mm HM-2751.60D 60mm HM-2701.60D
* Can be used for shear boxes and consolidation cells.
100mm HM-2751.100D 100mm HM-2701.100D
Square Model Square Model Part Numbers ending in .XX require a size code
to be entered referring to the sample size to
2.0" HM-2751.20S 2.0" HM-2701.20S be tested.
2.42" HM-2751.24S 2.42" HM-2701.24S For direct/residual shear samples, sizes are: .20
= 2.0"; .242 = 2.42"; .25 = 2.5"; .40 = 4.0";
2.5" HM-2751.25S 2.5" HM-2701.25S .50 = 50mm; .60 = 60mm,and .100 = 100mm.
4.0" HM-2751.40S NOTE: use "S" for square and"D" for round
4.0" HM-2701.40S
samples.
50mm HM-2751.50S 50mm HM-2701.50S
Installation and Spare Parts Kit HM-4168:
60mm HM-2751.60S 60mm HM-2701.60S Direct Shear Installation and Spare Parts Kit
100mm HM-2751.100S 100mm HM-2701.100S Installation and spare parts kit provides tubing,
fasteners and tools to complete an installation
Shearbox assemblies include: sample box, (2) porous plates, (1) loading pad, and (1) grid plate. All shear- of pneumatic direct shear equipment (See page
boxes feature mounting screws for use with the HM-2750 ASTM D3080-compliant counter-balance device. 136).
Individual Weights
TSF weight 0.125 (1/8) 0.25 (1/4) 0.50 (1/2) 1.0 2.0 4.0
Model no. HM-1120.125 HM-1120.250 HM-1120.500 HM-1120.1 HM-1120.2 HM-1120.4
Kg weight 0.5 kg 1.0 kg 2.0 kg 4.0 kg 5.0 kg 8.0 kg 10.0 kg
Model No. HM-1122.05 HM-1122.1 HM-1122.2 HM-1122.4 HM-1122.5 HM-1122.8 HM-1122.10

HM-1120
Weight Set Set Includes Model No. Ship. Wt.
16 TSF set includes: (2) .125 TSF, (1) .25 TSF, (1) .50 TSF, (1) 1.0 TSF, (1) 2.0 TSF, (3) 4.0 TSF weights HM-1120 140 lbs. (64kg)

32 TSF set includes: (2) .125 TSF, (1) .25 TSF, (1) .50 TSF, (1) 1.0 TSF, (1) 2.0 TSF, (7) 4.0 TSF weights HM-1121 275 lbs. (125kg)

32 kg set includes: (4) 1 kg, (3) 4 kg, (2) 8 kg weights HM-1122 73 lbs. (33.1kg)

50 kg set includes: (3) 1 kg, (1) 2 kg, (1) 5 kg, (4) 10 kg weights HM-1125 110 lbs. (50kg)

64 kg set includes: (4) 1 kg, (5) 4 kg, (5) 8 kg weights HM-1123 150 lbs. (68kg )

88 kg set includes: (4) 1 kg, (5) 4 kg, (8) 8 kg weights HM-1124 130 lbs. (59kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

116
High Capacity Direct Shear SOIL MECHANICS
HM-5780 and HM-5790 Specifications:
HM-5780 0.002" to 0.2"/min
Strain Rate 0.0508 mm to 5.08 mm/min
HM-5790 0.000004” to .4”/min
Strain Rate 0.0001 mm to 10 mm/min
Data Channels 4
1000 tests and up to 3000
Data storage
readings per test
Dimensions 43" x 23" x 40"
(L x D x H) (1090 x 584 x 1020mm)
110/220V 50/60Hz -
Voltage
6.5amps

High-Capacity Direct Shear Apparatus see all the data in several formats at the machine Loading and unloading the specimen and shear
ASTM D5321, D6243 while the test is running. Data can then be viewed ring assembly to and from the water chamber is
The High-Capacity Direct Shear Machine has simultaneously or downloaded later to a computer simplified using the Compaction Table. Pulling
been specifically designed for testing large, 12" in the lab, in the next room or at a different loca- the loaded shear rings onto the convenient table
(305mm) square soil sample sizes of soil and soil/ tion, while also providing report generation capa- rollers allows the entire assembly to slide easily
geosynthetics. Samples are mounted in a two- bilities from within Humboldt's NEXT software or into and out of the chamber. Sample compaction,
piece shear ring assembly, horizontally divided in our enhanced HM-5700SW Direct Shear software geotextile placement, and specimen preparation
half. The bottom half is held securely in place while module. can be performed on the table, before placing the
a vertical confining force is applied. Horizontal When operated from a networked computer the assembly directly into the water chamber with little
force is then directed against the upper half of the NEXT software provides robust machine and test effort.
ring to shear the specimen. control, and report generation. It also allows the The direct shear is designed for harsh lab environ-
Sample loads are obtained by the use of four ability to control and monitor multiple machines ments. All steel parts are powder coated and alu-
pneumatic pistons. This concept increases the from a single computer. Applying the vertical load minum parts are hard-coat anodized for corrosion
accuracy and sensitivity of light load settings. Two, is accomplished by setting the precision regulator resistance. Casters on the machine and compac-
small-diameter rolling diaphragm pistons are capa- to the required pressure per the calibration chart. tion table allow for easy movement in the lab.
ble of applying light loads to 1,000 lbs (454kg) and Load settings are verified on a pressure readout These direct shear machines include the compac-
the two, larger pistons apply loads up to 10,000 that reads to two decimal places and is accurate tion table and the top and bottom shear rings.
lbs (45kN) or 20,000 lbs (90kN) depending on the to 0.25%. The horizontal shear rate is set using the The top ring measures 12" x 12" x 4" (305 x 305
model. digital thumb wheel on the control panel. Limit x 102mm), and the bottom ring measures 12"
In stand-alone mode, these direct shear machines switches are used to set the home position of the x 16" x 4" (305 x 406 x 102mm). Software and
provide a 7" (178mm) touch-screen controller, giv- shear rings and to limit the travel to 4" (300mm). data cable are also included. A 120psi (827kPa)
ing you finger-tip control of your testing processes, Consolidation and shear displacement are mea- source of clean, dry, compressed air is required for
as well as providing real-time, visual views of your sured by linear displacement transducers and operation.
data in both tabular and graphic formats. displayed on the digital readout. Shear load is 45kN Large Direct Shear 110/220VAC 50/60 Hz HM-5780.3F
These new waterproof, touch screens provide col- measured from a load cell attached to the water Shipping wt. 1025 lb (465kg)

orful, at-a-glance monitoring of testing functions chamber. The included software imports data
without the use of a computer. Operators can onto spreadsheets such as Excel® for analysis and
reporting. Displayed values on the readout can be
viewed at anytime.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 117
SOIL MECHANICS High Capacity Direct Shear

Stand-Alone Control • Real-time graphical chart and numerical • Stores unlimited tests with up to
Humboldt's touch-screen controller provides you display of tests via touch-screen display 3000 points per test.
with full, graphical monitoring of all testing func- • Effective sampling rate of 50 readings • Up to 255 individual tests can be run
tions in a stand-alone application, while maintain- per second simultaneously from a single PC
ing full computer control when desired. • Stores up to 1000 tests with 3000
Now you can have full, finger-tip control and mon- points per test
itoring of all testing functions with Humboldt's • 2 USB ports. One in front for data transfer • Provides advanced graphing capabilities
touch-screen controller. This seven-inch, water- and the rear port is for powering a wireless • Provides full-unit customization
proof screen provides at-a-glance monitoring of access point. • Reports can also be exported to Excel or
testing functions, in a real-time graphical display, Computer Control a CSV file, if desired, and, we can provide
without the use of a computer, building upon Hum- NEXT software and the enhanced Direct Shear custom integration/export solutions for LIMS,
boldt's dedication to modular, stand-alone data module, HM-5700SW, is included with the EQuIS, gINT, etc.
Controller Specifications:
acquisition. HM-5780 High-Capacity Direct Shear machine.
Display (Resistive Touch) 7" (178mm) VGA (480 x 800)
This software provides calibration, data acquisition
Now, in a stand-alone application, you will be able
and report generation for those using a computer Real-time test data Graphic and tabulation
to run tests and display results while viewing tab-
to control consolidation testing operations. Processor Dual 32-bit ARM
ulation, basic x-y graphs and instrument readings
in real-time during the test, using user-defined, In addition, operators have the ability to view and RAM 64MB
basic data acquisition. Test data is stored in the control testing operations from a PC in the lab, in
Memory, non-volatile 4GB
device and can be downloaded to a USB drive via the next room or at a different location, while also
providing report generating capabilities using the Analog to digital converter 24 bit
the machine's FRONT USB port or the data can be
transferred to a computer via the LAN port. direct-shear test-specific software module. Data acquisition 4 Channels

A second USB port located on the back of the So, whether you are controlling a single direct- Logging speed up to 50 readings per second

machine can also be used to power a wireless shear machine, controlling multiple machines or
Multi-test storage 1000
access point, which can provide a wireless hook-up even a complete geotechnical lab, Humboldt's
NEXT software, in conjunction with Humboldt's Points per test 3000
with a computer, if no LAN is available.
Direct Shear machines, provides a complete USB port (front)
export data, import/export
Touch-Screen Controller provides: calibration data, WiFi
solution for the calibration, acquisition, record-
• 4-channel data acquisition provides external power
ing and presentation of direct shear testing data USB port (back)
• Hi-res, 7", waterproof, touch-screen for wireless access point
in data tabulation and graphic chart formats.
provides total control and real-time Ethernet connection for network connectivity
graphical display of tests
• Machine control, and data acquisition Emergency stop Large button
• Machine/Test control and data acquisition
via touch-screen via networked computer 24-bit differential
4
analog to digital converter
• Control all channels at the same time • Provides the ability to use Next Software's,
advanced test-specific modules Ambient temperature
• Calibration of channels to load cell and sensor
1
transducer • Real-time graphical chart and numerical
Limit switches 2
display of tests via computer display
• Effective sampling rate of 50 readings Firmware Update Ethernet or flash drive

per second

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

118
Triaxial Load Frames SOIL MECHANICS
E L I T E S E R I E S
Load Frames

Elite Series Load Frames testing and other testing require-

ASTM D1883, D2850, D2166, D4767 ments up to 15kN or 3,000 lbf. and,
and D1559; AASHTO T193, T296, T297, the HM-5040, is a heavy-duty machine
T208, T245 and T246; BS 1377: Part 4, capable of handling testing require-
BS 1377 Part 7, BS 1377 Part 8, BS 598 ments up to 100kN or 22,000 lbf.
Part 107 These machines provide four (4) inte-
Humboldt's Elite Series Load Frames gral and independent data acquisi-
provide the materials testing lab with tion channels, which can be utilized in
a choice of three, highly-versatile and stand-alone configurations or accessed
precision-built loading systems cover- through a LAN-networked computer
ing a range of testing applications. The using Humboldt's Next Software.
HM-5030 is the workhorse of the group, Elite Series load frames are built with
capable of handling any testing need up durable, high-quality components and
to 50kN or 11,000 lbf. The HM-5020 is a feature the use of a stepper motor,
machine designed specifically for triaxial precision gears and gear box to ensure
smooth and reliable operation, as well
as precise results.
In stand-alone mode, these load frames
provide a 7" (178mm) touch-screen
Elite Series load
controller. These new waterproof, touch
frames are sold
screens provide colorful, at-a-glance
as load frames
monitoring of testing functions without
only though shown
the use of a computer. Operators can
here with typical
see all the data in several formats at the
triaxial setups
machine while the test is running. Data
can then be downloaded later to a com-
puter in the lab, in the next room or at
a different location, while also provid-
ing report generation capabilities from
within Humboldt's NEXT software or our
enhanced test-specific modules.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 119
SOIL MECHANICS Triaxial Load Frames

HM-5030 MASTER LOADER HM-5020 TRIAXIAL LOADER HM-5040 GRAND LOADER

Load capacity 11000 lbf (50kN) Load capacity 3000 lbf (15kN) Load capacity 22000 lbf (100kN)
0 - 3.0000 in/min. 0 - 3.0000 in/min. 0 - .4999 in/min.
Speed range Speed range Speed range
0 - 75.0000 mm/min. 0 - 75.0000 mm/min. 0 - 12.5000 mm/min.
Data channels 4 Data channels 4 Data channels 4
Platen Size / Travel 10" (254mm) / 4" (100mm) Platen Size / Travel 10" (254mm) / 4" (100mm) Platen Size / Travel 10" (254mm) / 4" (100mm)
1000 tests and up to 3000 1000 tests and up to 3000 1000 tests and up to 3000
Data storage Data storage Data storage
readings per test readings per test readings per test
Clearance, vertical 40" (1000mm) Clearance, vertical 27" (686mm) Clearance, vertical 44" (1100mm)
Clearance, horiz. 15" (380mm) Clearance, horiz. 11" (286mm) Clearance, horiz. 21" (540mm)
Voltage 110/220V 50/60Hz. 5.0 amps Voltage 110/220V 50/60Hz - 5.0amps Voltage 110/220V 50/60Hz - 5.0amps

Designed for applications requiring multi-purpose A small-footprint, triaxial-specific load frame that The HM-5040 Grand Loader is ideal for just about
loading systems, such as road construction projects provides the versatility, precision and durability any application from road construction to high-vol-
in either mobile or fixed labs, educational institu- found throughout Humboldt's Elite Series load ume commercial and educational laboratories,
tions and consulting firms, the HM-5030 Master frames. which require higher pressure loading capacities
Loader is ideal for just about any application from The HM-5020 Triaxial Loader has been specifically up to 22000 lbf (100kN), such as those involving
road construction to high-volume commercial and designed to handle triaxial testing applications, larger sized samples and samples comprised of
educational laboratories. including: UU, CU and CD triaxial and UC. From rock and rock/soil mixtures. It's wider stance and
While the HM-5030 has been specifically designed educational institutions and consulting firms to large vertical and horizontal clearances allows it to
for soil testing labs conducting multiple testing high-volume commercial labs and construction accommodate much large sample cells.
operations including: UU, CU and CD triaxial, UC, projects, the Triaxial Loader can handle any appli- Its heavy-duty design and precise stepper-motor
CBR and LBR, it is also perfect for running Mar- cation with ease. Its heavy-duty design and precise control provide a stable platform for years of reli-
shall, Hveem, TSR and SCB asphalt tests as well. Its stepper-motor control provide a stable platform able service allowing the HM-5040 to perform any
heavy-duty design and precise stepper-motor con- for years of reliable service allowing the HM-5020 tests required up to its load capacity of 22000 lbf
trol provide a stable platform for years of reliable to perform any tests required up to its load capac- (100kN).
service allowing the HM-5030 to perform any tests ity of 3000 lbf (15kN). Like all Elite Series load frames, the HM-5040 is
required up to its load capacity of 11000 lbf (50kN). Like all Elite Series load frames, the HM-5020 is built around Humboldt's integral, 4-channel data
Like all Elite Series load frames, the HM-5030 is built around Humboldt's integral, 4-channel data logger with touch-screen control, which allows
built around Humboldt's integral, 4-channel data logger with touch-screen control, which allows the load frame to be used as a standalone device
logger with touch-screen control, which allows the load frame to be used as a standalone device capable of full test control and data logging. It can
the load frame to be used as a standalone device capable of full test control and data logging. It can also be controlled by a networked computer
capable of full test control and data logging. It can also be controlled by a networked computer at any Grand Loader, 110/220V 50/60 Hz HM-5040.3F
also be controlled by a networked computer at any location with access to the network. Shipping wt. 300 lb (54kg)
location with access to the network. Triaxial Loader, 110/220V 50/60 Hz HM-5020.3F
Master Loader, 110/220V 50/60 Hz HM-5030.3F Shipping wt. 300 lb (54kg)
Shipping wt. 300 lb (136kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

120
Triaxial Load Frames SOIL MECHANICS
E L I T E S E R I E S
Load Frames

Choose:
Stand-Alone or Computer Control
Stand-Alone Control Touch-Screen Controller provides: So, whether you are controlling a single load
Humboldt's touch-screen controller provides you • 4-channel data acquisition frame, controlling multiple machines or even
with full, graphical monitoring of all testing func- • Hi-res, 7", waterproof, touch-screen a complete geotechnical lab, Humboldt's
tions in a stand-alone application, while maintain- provides total control and real-time NEXT software, in conjunction with Hum-
ing full computer control when desired. graphical display of tests boldt's Elite Series Load Frames provide a
Now you can have full, finger-tip control and mon- • Machine/Test control and data acquisition complete solution for the calibration, acquisi-
itoring of all testing functions with Humboldt's via touch-screen tion, recording and presentation of testing data
touch-screen controller, found on Humboldt's • Control all channels at the same time in data tabulation and graphic chart formats.
Elite Series Load Frames. This seven-inch, water- • Calibration of channels to load cell and • Machine control, and data acquisition
proof screen provides at-a-glance monitoring of transducer via networked computer
testing functions, in a real-time graphical display, • Real-time graphical chart and numerical • Provides the ability to use Next Software's,
without the use of a computer, building upon Hum- display of tests via touch-screen display advanced test-specific modules
boldt's dedication to modular, stand-alone data • Effective sampling rate of 50 readings • Real-time graphical chart and numerical
acquisition. per second display of tests via computer display
• Stores up to 1000 tests with 3000 • Effective sampling rate of 50 readings
Now, in a stand-alone application, you will be able
points per test per second
to run tests and display results while viewing tab-
• 2 USB ports. One in front for data transfer • Stores unlimited tests with up to
ulation, basic x-y graphs and instrument readings
and the rear port is for powering a wireless 3000 points per test.
in real-time during the test, using user-defined,
access point. • Up to 255 individual tests can be run
basic data acquisition. Test data is stored in the
Computer Control simultaneously from a single PC
device and can be downloaded to a USB drive via
Humboldt's Next software is included with the • Provides advanced graphing capabilities
the machine's FRONT USB port or the data can be
all Elite Series Load Frames. This software provides • Provides full-unit customization
transferred to a computer via the LAN port.
robust machine control, calibration, data acquisi- • Reports can also be exported to Excel or
A second USB port located on the back of the tion and report generation for those using a com- a CSV file, if desired, and, we can provide
machine can also be used to power a wireless puter to control testing operations. custom integration/export solutions for LIMS,
access point, which can provide a wireless hook-up
In addition, operators have the ability to view and EQuIS, gINT, etc.
with a computer, if no LAN is available.
control testing operations from a PC in the lab,
in the next room or at a different location, while
also providing report generating capabilities using
NEXT software and the test-specific software
modules.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 121
SOIL MECHANICS Triaxial Load Frames
Controller Specifications
Specifications for the touch-screen controller,
instrumentation and data acquisition
used with Humboldt Elite series load frames
Typical Test Setups with HM-5030

Controller Specifications:
Display (Resistive Touch) 7" (178mm) VGA (480 x 800)

Real-time test data Graphic and tabulation

Processor Dual 32-bit ARM

RAM 64MB

Memory, non-volatile 4GB

Analog to digital converter 24 bit

Data acquisition 4 Channels

Logging speed up to 50 readings per second

Multi-test storage 1000

Points per test 3000

CBR/LBR Unconfined
export data, import/export
USB port (front)
calibration data, WiFi Compression
provides external power
USB port (back)
for wireless access point

Ethernet connection for network connectivity

Emergency stop Large button

24-bit differential
4
analog to digital converter

Ambient temperature
1
sensor

Limit switches 2

Firmware Update Ethernet or flash drive

Consolidated
Drained and Unconsolidated
Undrained Undrained

Humboldt stepper motor, precision

gears and gear box used on all Elite
Series Load Frames ensure smooth
operation and precise results.

Marshall Semi-Circular Bending

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

122
Triaxial Load Frames SOIL MECHANICS

CU/UU Triaxial Setup with HM-2850

Components Item
Load
50kN (11240 lbf) capacity HM-2850.3F
Specifications
Strain
Load capacity 11000 lbf (50kN)
Load ring 2,200 lbf (10 kN) H-4454.020
.00001 - 2.00000 in/min.
Speed range Dial gauge 2.0" travel,
.00001 - 50.80000 mm/min. H-4463
0.001" divisions)
Platen Size / Travel 8" (203mm) / 4" (100mm)
Pore pressure transducer HM-4170
Clearance, vertical 40" (1000mm)
Ball seat adapter HM-200387
Clearance, horiz. 11" (279mm)
Single channel readout HM-2350
17 x 22 x 51 inch
Dimensions (l x w x h). (choose) HM-2350.4F
(432 x 559 x 1295mm)
Voltage 110/220V 50/60Hz. 5.0 amps NEXT software basic,
included
user defined
Pressure
Pressure distribution panel for HM-4150.3F
CU triaxial (choose) HM-4150M.3F
Pressure distribution panel for HM-4140.3F
UU triaxial (choose) HM-4140M.3F
De-airing system HM-4187A.3F
H-1763A
Vacuum pump (choose)
H-1763A.4F
Multi-Speed Load Frame Triaxial Cell (choose 1 below)
ASTM: D1883, D2850, D2166, D4767, and
3"/ 75mm dia. capacity HM-4199B
D1559; AASHTO: T193, T296, T297, T208, T245,
and T246; BS 1377: Part 4: 1990, BS 1377: Part 4"/ 100mm dia. capacity HM-4199B-4
HM-2850.3F 7: 1990, BS 1377: Part 8: 1990, BS 598: Part 107 Top Cap/ Base Pedestal Set
HM-4199.XX
The HM-2850 Multi-speed Load Frame is designed (specify specimen size)
HM-2850 load frame shown with
optional components for conduct- for those who want a high-quality, but simple,
ing CU Triaxial tests. multi-purpose load frame without built-in data Unconfined Compression Setup with HM-2850
acquisition capabilities. The HM-2850 is ideal for
Components
applications where the operator is either not con-
cerned with data acquisition; or, already has or is Load
planning to construct their own data acquisition 50kN (11240 lbf) capacity HM-2850.3F
system. With its large 7" color, touchscreen, the Upper unconfined platen HM-2002
HM-2850 provides the operator with the ability
Displacement
to precisely select any speed with four decimal HM-3000.10.5
Features include: Contact Assembly
accuracy within the machine’s speed range.
• 8” platen provides roomy, stable base The HM-2850 features a quiet, direct drive step- Load ring 500 lbf (2.5 kN) H-4454.005
for test equipment per motor that provides a range of loading speeds Dial gauge 2.0" travel
H-4463
• User selectable unit change from from 0.00001 to 2.00000 in/min. This speed range 0.001" divisions
touchscreen between U.S. Standard is more than adequate for the majority of standard
and Metric units. soil tests. The HM-2850 also incorporates a sep-
arate, dedicated control to accommodate 2.00 Typical Soil Cement Setup
in/min. for use in Marshall and TSR Testing, as Components
Multi-Speed Load Frame— HM-2850.3F
well as a rapid travel speed of 2.25 in/min for mov-
Includes: Load
ing the platen into position quickly. Speeds are
SHH04—3/4"-16 Bolt x 3.5" long 50kN (11240 lbf) capacity HM-2850.3F
controlled through the use of edit keys and the
WF04—Washer for SHH04 Bolt digital display. Upper swivel platen HM-2003E
Multi-Speed Load Frame, 110/220V 50/60 Hz HM-2850.3F Strain
Shipping wt. 300 lb (136kg)
Load ring 5,000 lbf (25 kN) H-4454.050

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 123
SOIL MECHANICS Triaxial Cells

HM-4199B-6

HM-4199B

HM-4199.28
HM-4199B-4

HM-4199B

Triaxial Cells for maximum convenience. Two valves handle top (stainless steel for use with hazardous materials).
Triaxial Cells are available for use with sample sizes drainage, two valves handle bottom drainage, When ordering, specify top cap and base pedestal
from 1.4" (35mm) to 6" (150mm). The clear acrylic and one valve handles filling and drainage, as well for desired sample size. Order porous stones sepa-
chamber has a working pressure of 150 psi (1,000 as providing confining pressure to the cell. The rately, see page 79. Cell dimensions are: 13.75" H
kPa) and is tested to 250 psi (1,700 kPa). The design removable base pedestal accommodates various x 8.75" dia. (349.2 x 222.3mm); overall diameter is:
features a solid base, which provides an extremely sample diameters. Top caps and base pedestals 11" (279.4mm).
stable test platform making it faster and easier to are available in a choice of black-anodized alumi- Overall
center the cell on the load frame platen— reduc- num or stainless steel in various sizes (see chart Cell Height Weight
Dia.
ing setup times. HM-4199B cells provide easy below). Other sizes are available. The cell top and
HM-4199B 13.75 11 15 lb (7kg)
access to the test chamber by utilizing a one-piece, base are precision machined from 6061 T6 alumi-
chamber unit that is quickly removed through the num, black anodized for a durable finish. A .625" HM-4199B-4 15 11.75 28 lb (13kg)
removal of three easy-turn knobs. These cells also hardened stainless steel piston runs inside a linear HM-4199B-6 25.5 12.75 120 lb (54kg)
have an integral de-airing block for the pore pres- bearing to reduce friction. Choice of brass or stain-
Triaxial Cells See Table
sure transducer built into the side. The cells have less steel valve fittings is available Shipping wt. See Table
five no-volume-change valves aligned on one side

Aluminum, Anodized Stainless Steel (for Hazardous Materials)

Size Cell
Set* Top Cap Pedestal Stainless Steel* Top Cap Pedestal
35mm HM-4199.35 HM-4199.35T HM-4199.35B HM-4199.35SS HM-4199.35SST HM-4199.35SSB
1.4" HM-4199.14 HM-4199.14T HM-4199.14B HM-4199.14SS HM-4199.14SST HM-4199.14SSB
38mm HM-4199.38 HM-4199.38T HM-4199.38B HM-4199.38SS HM-4199.38SST HM-4199.38SSB
1.5" HM-4199B H M-4199.15 HM-4199.15T HM-4199.15B HM-4199.15SS HM-4199.15SST HM-4199.15SSB
or
50mm HM-4199SS HM-4199.50 HM-4199.50T HM-4199.50B HM-4199.50SS HM-4199.50SST HM-4199.50SSB
2.0" HM-4199.20 HM-4199.20T HM-4199.20B HM-4199.20SS HM-4199.20SST HM-4199.20SSB
70mm HM-4199.70 HM-4199.70T HM-4199.70B HM-4199.70SS HM-4199.70SST HM-4199.70SSB
2.8" HM-4199.28 HM-4199.28T HM-4199.28B HM-4199.28SS HM-4199.28SST HM-4199.28SSB
100mm HM-4199B-4 or HM-4199.100 HM-4199.100T HM-4199.100B HM-4199.100SS HM-4199.100SST HM-4199.100SSB
4.0" HM-4199SS-4 HM-4199.40 HM-4199.40T HM-4199.40B HM-4199.40SS HM-4199.40SST HM-4199.40SSB
150mm HM-4199B-6 or HM-4199.150 HM-4199.150T HM-4199.150B HM-4199.150SS HM-4199.150SST HM-4199.150SSB
6" HM-4199SS-6 HM-4199.60 HM-4199.60T HM-4199.60B HM-4199.60SS HM-4199.60SST HM-4199.60SSB
*Set contains Top Cap and Base Pedestal
NOTE: Cell sizes 35mm, 1.4",38mm and 1.5" include HM-4199B.20 piston extension.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

124
Triaxial Distribution Panels SOIL MECHANICS

HM-4155 HM-4164.3F
HM-4154 HM-4165.3F

Automated Control Panel Humboldt auto control panels feature an analog Humboldt manual control panels feature an analog
ASTM: D2850, D2166, D4767, and D1559; input pressure gauge and controller, an air/water input pressure gauge and controller, an air/water
AASHTO: T193, T296, T297, T208; BS 1377: Part filter for the input pressure and de-aired water filter for the input pressure and de-aired water tank
4: 1990, BS 1377: Part 7: 1990, BS 1377: Part 8: tank input, as well as quick-disconnects for quickly input, a digital pressure readout for each set of cell
1990 connecting bladders, the pressure controller and functions, as well as quick-disconnects for quickly
Used in conjunction with the HM-2450A.3F pres- triaxial cells. connecting bladders, the pressure controller and
sure controller, Humboldt automated control panels The HM-4154 provides connections for one triaxial triaxial cells.
provide an accurate and easy-to-operate solution cell, while the HM-4155 provides connections for Specifications
for providing the controls necessary for distributing up to three triaxial cells. For each triaxial cell, one
Pressure gauge psi BAR Mpa
compressed air, water, de-aired water and vacuum bladder is required for generating the cell pressure
within an air/water bladder-type triaxial testing and a second bladder is required for back pressure. Max. input pressure 200 14 1.4
system. The use of these control panels and the Max. output
HM-2450A.3F pressure controller allows changes 150 10 1
Automated Panel, 1 Cell HM-4154 pressure
in cell and back pressures required for sample sat- Shipping wt. 100 lb (45.3kg)
Pressure resolution 0.1 0.01 0.001
uration to be done automatically without the need
Automated Panel, 3 Cell HM-4155
for an operator. This feature reduces the need for HM-4164 dimensions 8 x 8 x 37.5"
Shipping wt. 80lb (36.2kg)
continual monitoring of the sample saturation pro- (L x W x H) (203 x 203 x 952mm)
Manual Control Panel
cess during a triaxial test. HM-4165 dimensions 8 x 19.5 x 37.5"
ASTM: D2850, D2166, D4767, and D1559;
(L x W x H) (203 x 495 x 952)
AASHTO: T193, T296, T297, T208; BS 1377: Part
Specifications
4: 1990, BS 1377: Part 7: 1990, BS 1377: Part 8:
The HM-4164 provides connections for one triax-
Pressure gauge psi BAR Mpa 1990
ial cell, while the HM-4165 provides connections
Max. input pressure 200 14 1.4 For those operations that do not require auto- for up to three triaxial cells. For each triaxial cell,
Max. output mated control, Humboldt's HM-4164 and one bladder is required for generating the cell
150 10 1 HM-4165 manual control panels provide an accu-
pressure pressure and a second bladder is required for
rate and easy-to-operate solution for controlling back pressure .
Pressure resolution 0.1 0.01 0.001
compressed air, water, de-aired water and vacuum
Manual Panel, psi, 1 Cell,
Display LCD within an air/water bladder-type triaxial testing
120/220V 50/60Hz HM-4164.3F
HM-4164 dimensions 8 x 8 x 37.5" system. Shipping wt. 100 lb (45.3kg)
(L x W x H) (203 x 203 x 952mm) The use of these control panels provides the nec- Manual Panel, kPa, 1 Cell,
HM-4165 dimensions 8 x 19.5 x 37.5" essary control for making changes in cell and back 120/220V 50/60Hz HM-4164M.3F
(L x W x H) (203 x 495 x 952) pressures required for sample saturation to be Shipping wt. 100 lb (45.3kg)
done from a central location on the panel. The
Manual Panel, psi, 3 Cell,
operator has complete control of system pressure
120/220V 50/60Hz HM-4165.3F
during the triaxial test with three independent- Shipping wt. 76 lb (34.7kg)
ly-controlled pressure regulators. These control
Manual Panel kPa, 3 Cell,
panels have a bias pressure regulator feature,
120/220V 50/60Hz HM-4165M.3F
which allows simultaneous control of confining and
Shipping wt. 100 lb (45.3kg)
back pressures, while maintaining a constant differ-
ential pressure

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 125
SOIL MECHANICS Triaxial Flex Panels

HM-4140.3F HM-4150.3F HM-4150A HM-4160.3F HM-4160A

Humboldt FlexPanels for each cell. They can monitor volume change in Control Panel, 1-Cell (kPa), 120/220V 50/60Hz
ASTM: D1559, D2850, D2166, D4767, and the sample and can be used to measure the flow of HM-4150M.3F
D5084; AASHTO: T193, T296, T297, T208; BS water through the sample for permeability testing. Shipping wt. 98 lb (44.5kg)

1377: Part 4: 1990, BS 1377: Part 6, BS 1377: FlexPanels can manually measure volume change Control Panel, 2-Cell (kPa), 120/220V 50/60Hz
Part 7: 1990, BS 1377: Part 8: 1990 or permeability in a triaxial test sample without the HM-4160.3F
Humboldt FlexPanels provide an accurate and use of a volume change apparatus, a distinct ben- Shipping wt. 175 lb (79.3kg)

easy-to-operate solution for controlling com- efit when compared to air/water bladder systems. Control Panel, 2-Cell (kPa), 120/220V 50/60Hz
pressed air, water, de-aired water and vacuum See page 92-93 for more information and specifi- HM-4160M.3F
without the need for air/water bladder interfaces cations for Humboldt's FlexPanels. Shipping wt. 125 lb (56kg)

to produce the pressures necessary for triaxial Control Panel (psi), 120/220V 50/60Hz HM-4140.3F Auxiliary Panel, 1-Cell HM-4150A
testing. FlexPanels utilize a set of three burettes to Shipping wt. 35 lb (16kg) Shipping wt. 77 lb (34.9kg)
control cell, top cap and base pedestal pressures. Control Panel (kPa), 120/220V 50/60Hz HM-4140M.3F Auxiliary Panel, 2-Cell HM-4160A
This extremely versatile pressure system controls Shipping wt. 50 lb (22.6kg) Shipping wt. 275 lb (124.7kg)

the pressure, water, de-airing tank and vacuum Control Panel, 1-Cell (psi), 120/220V 50/60Hz
from a single panel. The three burettes allow for the HM-4150.3F
control of the cell pressure and the back pressure Shipping wt. 98 lb (44.5kg)

HM-4140.3F HM-4140M.3F HM-4150.3F HM-4150M.3F HM-4160.3F HM-4160M.3F HM-4150A HM-4160A

Pressure/ 2-150 psi 14-1000 kPa 2-150 psi 14-1000 kPa 2-150 psi 14-1000 kPa
Resolution (0.1 psi) (1 kPa) (0.1 psi) (1 kPa) (0.1 psi) (1 kPa)
Not Applicable
0-14.7 psi (0-100kPa) 0-14.7 psi (0-100kPa) 0-14.7 psi (0-100kPa)
Vacuum
or 30 Hg or 30 Hg or 30 Hg or 30 Hg or 30 Hg or 30 Hg
Inner Burette
Cell Not Applicable 50cc x 0.1 cc (ml) area = 0.305cm2

Top Not Applicable 10cc x 0.02 cc (ml) area = 0.305cm2

Base Not Applicable 10cc x 0.02 cc (ml) area = 0.305cm2
Outer Burette
Cell Not Applicable 400 cc (ml)
Top Not Applicable 460 cc (ml)
Base Not Applicable 460 cc (ml)
Voltage 110/220VAC 50/60Hz
Not Applicable
Power 6 watts
Operating
14 to 158°F (-10 to 70°C)
Temperature
8 x 8 x 37.5" 8 x 25.5 x 37.5" 8 x 43.5 x 37.5" 8 x 19.5 x 37.5" 8 x 37.5 x 37.5"
Dimensions
(203 x 203 x 952mm) (203 x 648 x 952mm) (203 x 1105 x 952mm) (203 x 495 x 952) (203 x 952 x 952)

Shipping
35lb (16kg) 98lb (44.4kg) 175lb (79.3kg) 77lb (34.9kg) 275lb (124.7kg)
Weight

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

126
Triaxial Setups SOIL MECHANICS

Humboldt Triaxial Testing Systems Humboldt's automated pressure control triaxial sys-
Humboldt provides an extensive line of triaxial test- tem is built around the HM-5240.3F Stand-alone
ing equipment solutions for today's soil labs. pressure controller. The HM-5240.3F is a fully-auto-
Presented below and on the following pages are mated pneumatic pressure controller, which is highly
three triaxial systems based around our HM-5030 accurate up to 150psi (1000kpa) in pressure and
and HM-5020 load frames, our NEXT software with 100cc (100ml) in volume. It is designed specifically
triaxial-specific software modules and three different for geotechnical laboratory triaxial testing (UU, CU
pressure control solutions. and CD) and provides control and monitoring of cell
Automated Pressure Control Triaxial System pressure, back pressure, pore water measurement

40.0psi Designed for those who want the ultimate in control

and volume change when used with our Elite Series
load frames.
of their triaxial testing, Humboldt's automated pres-
sure control triaxial system is a computer-controlled The HM-5240 provides four (4) integral and indepen-
system specifically designed for soil testing laborato- dent data acquisition channels, which can be utilized
ries conducting UU, CU and CD Triaxial tests, as well in stand-alone configuration or accessed through a
as unconfined compression. It is perfect for large, LAN-networked computer using Humboldt’s NEXT
high-volume labs, as well as those who want to utilize software. The unit is built with durable high-quality
UU-Triaxial Test technology to increase staff efficiencies and testing components and features the use of two electronic
Typical Cell Setup accuracy. This system provides complete control of regulators to ensure smooth and reliable operation
the testing process including data acquisition. of pressures, as well as precise results.
Available in one or three-cell configurations, our In stand-alone mode, this pressure controller pro-
automated control panels can handle your testing vides a 7” (178mm) touch-screen controller. This
needs in stride. And, if you want to increase the num- new waterproof, touch screen provides colorful, at-a-
ber of simultaneous tests you can run, Humboldt's glance monitoring of testing functions without the
NEXT software can easily handle a multitude of tests. use of a computer. Operator could see all the data in
All you need to do is add cells and the other appro- several formats at the controller while the test is run-
ning. Then can be viewed simultaneously or down-
37.0psi
priate equipment to handle your needs.
loaded later to a computer in the lab, in the next
room or at a different location, while also providing
report generation capabilities from within Hum-
40.0psi boldt’s NEXT software or our enhanced test- specific
modules. The system can also be configured for use
with our triaxial-specific load frame, the HM-2900.
While Humboldt's automated pressure control triax-
ial system has been designed to work as a complete
system, its make-up provides for the ultimate in ver-
satility and expanded possibilities.
CU-Triaxial Test See pages 128-129 for a complete component list
Typical Cell Setup for the automated pressure control triaxial system

37.0psi

40.0psi

2.50cc

CD-Triaxial Test
Typical Cell Setup

Automated Pressure Control Triaxial System Components

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 127
SOIL MECHANICS Triaxial Setups

Manual Pressure Control Triaxial System FlexPanel Pressure Control Triaxial System Humboldt's FlexPanel pressure control system
Humboldt's manual pressure control triaxial system Humboldt's FlexPanel pressure control option also uses our NEXT software and our enhanced
provides a manually-controlled alternative to our eliminates the use of the air/water bladder inter- test-specific modules, which monitors, controls
automated system. The manual system eliminates face concept of pressure control in lieu of its high- and reports test data, and, the highly-regarded
the HM-5240.3F pressure controller from the sys- ly-accurate burette system. Humboldt FlexPanels HM-5030 load frame with its built-in, 4-channel
tem and replaces its function with a control panel provide an accurate and easy-to-operate solution data acquisition controller for stress, strain, pore
that allows for manual control of the confining and for controlling compressed air, water, de-aired water pressure and volume change measurement.
back pressures. The HM-2315 Volume Change water and vacuum without the need for air/water The system can also be configured for use with our
Apparatus, which measures the volume change bladder interfaces to produce the pressures nec- triaxial-specific load frame, the HM-5020
of a soil sample by monitoring the flow of water essary for triaxial testing. FlexPanels utilize a set See pages 132-133 for a complete component list
through the chamber of the unit. The lower assem- of three burettes to control cell, top cap and base for the FlexPanel Pressure Control Triaxial System.
bly contains changeover valves, which when used pedestal pressures.
in conjunction with the upper assembly provides This extremely versatile pressure system controls
limitless capacity. It is accurate to better than ±0.05 the pressure, water, de-airing tank and vacuum
ml and is easily de-aired in seconds from a single panel. The three burettes allow for the
Like the automated system, our manually-con- control of the cell pressure and the back pressure
trolled system can run UU, CU and CD triaxial tests, for each cell. They can monitor volume change in
as well as unconfined compression. Manual control the sample and can be used to measure the flow of
panels are available in one or three-cell configura- water through the sample for permeability testing.
tions and can be used in multiple configurations. This is a benefit to using FlexPanels over the air/
All you need to do is add cells and the other appro- water bladder system.
priate equipment to handle your needs.
Like our other control systems you can run UU, CU
Humboldt's manual pressure control triaxial sys- and CD triaxial tests, as well as unconfined com-
tem is built around our NEXT software and our pression with FlexPanels. They are available in one
enhanced test-specific modules, which monitors, or three-cell configurations and can be used in
controls and reports test data, and, the high- multiple configurations. All you need to do is add
ly-regarded HM-5030 load frame with its built-in, cells and the other appropriate equipment to han-
4-channel data acquisition controller for stress, dle your needs.
strain, pore water pressure and volume change
measurement. The system can also be configured
for use with our triaxial-specific load frame, the
HM-5020. While Humboldt's manual pressure con-
trol triaxial system has been designed to work as
a complete system, its make-up provides for the
ultimate in versatility and expanded possibilities.
See pages 130-131 for a complete component list
for the Manual Pressure Control Triaxial System

FlexPanel Pressure Control Triaxial System Components

SOIL
OIL MECHANICS
MECH
HANICS Triaxial Setups

Manual Pressure Control Triaxial System Components

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

128
Triaxial Setups SOIL MECHANICS

TRIAXIAL Automatic Pressure Control

Component List for 1 and 3-Cell Triaxial System
with Automatic Pressure Control
Automatic Pressure Control System,1-Cell Setup
Components
Load Frame (choose 1 below)
50kN (11240 lbf) capacity
15kN (3372 lbf) capacity
HM-5030.3F
HM-5020.3F
1
1
Automatic Pressure Control System, 3-Cell Setup

50kN(11240 lbf) capacity

15kN (3372 lbf) capacity
Components
Load Frame (choose 1 below)
HM-5030.3F
HM-5020.3F
1
1
Load/Strain Load/Strain
Load Cell HM-2300.020 1 Load Cell HM-2300.020 1
Strain Transducer (LSCT) HM-2310.20 1 Strain Transducer (LSCT) HM-2310.20 1
Ball Seat Adapter HM-200387 1 Ball Seat Adapter HM-200387 1
Strain Transducer Bracket HM-4178BRT 1 Strain Transducer Bracket HM-4178BRT 1
UU Triaxial Software Module HM-5002SW 1 UU Triaxial Software Module HM-5002SW 1
CU Triaxial Software Module HM-5003SW 1 CU Triaxial Software Module HM-5003SW 1
CD Triaxial Software Module HM-5006SW 1 CD Triaxial Software Module HM-5006SW 1
Pressure/Volume Change Pressure/Volume Change
Pressure Distribution Panel HM-4154 1 Pressure Distribution Panel HM-4155 1
Air/Water Bladder HM-4151A 2 Air/Water Bladder HM-4151A 6
Pressure/Volume Controller HM-5240.3F 1 Pressure/Volume Controller HM-5240.3F 3
De-airing System HM-4187A.3F 1 De-airing System HM-4187A.3F 1
H-1763A or H-1763A or
Vacuum Pump 1 Vacuum Pump 1
H-1763A.4F H-1763A.4F

HM-4220 or HM-4220 or
Silent Air Compressor 1 Silent Air Compressor 1
HM.4220.4F HM.4220.4F

Triaxial Cell (choose 1 below) Triaxial Cell (choose 1 below)

3"/ 75mm dia. capacity HM-4199B 1 3"/ 75mm dia. capacity HM-4199B 3

4"/ 100mm dia. capacity HM-4199B-4 1 4"/ 100mm dia. capacity HM-4199B-4 3

Top Cap/ Base Pedestal Set Top Cap/ Base Pedestal Set
HM-4199.XX 1 HM-4199.XX 3
(specify specimen size) (specify specimen size)

Installation Kit HM-4167 1 Installation Kit HM-4167 1

Standard Triaxial Sample Prep Accessories:

(See page 138 for a complete list and description. Items with .XX require a sample size)
Triaxial Installation Kit Accessory Item # Required Accessory Item # Required
Kit designed to provide fittings, connectors,
Acrylic Base Disk HM-4179.XX 2 or 6 2-Part Compaction Mold HM-3818.XX 1
tubing and tools to complete a triaxial set
up installation. See page 136 for kit con- Membranes HM-4180.XX 1 2-Part Vacuum Split Mold HM-3827.XX 1
tents and other individual set up items. Membrane Stretcher HM-4181.XX 1 Split Miter Box HM-3847.XX 1
O-Rings (12-pack) HM-4182.XX 1 Filter Paper (100-pack) HM-4189.XX 1
O-Ring Placing Tool HM-4183.XX 1 Filter Strips HM-4189FS 1
Porous Stone HM-4184.XX 2 or 6 High Vacuum Grease HM-4198 1
Membrane Tester HM-4185.XX 1

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 A B

Testing Equipment for Construction Materials

FRONT BACK
Pressure Control

5240

FRONT BACK
Pressure Control INCREASE

5240

Testing Equipment for Construction Materials

SOIL MECHANICS

A B A B

FRONT BACK
Pressure Control

5240

MASTER LOADER

5030 FRONT

FRONT

BACK BACK
PANEL CONNECTIONS LOAD CELL LSCT AIR
DRAIN TAP VACCUM COMPRESSED DE-AIRED TAP AIR
WATER IN AIR WATER IN WATER OUT VACCUM

DE-AIRED WATER TAP WATER VACUUM

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

CELL PRESSURE PORE WATER PRESSURE
Triaxial

Drain Tap Water

DeAired Water

Vaccum Compressed Air

Air Meters
Setups

Automatic Pressure Control System, 3-Cell Setup

129
130
Triaxial Setups SOIL MECHANICS

TRIAXIAL Manual Pressure Control

Component List for 1 and 3-Cell Triaxial System
with Manual air/water bladder Pressure Control
Manual Pressure Control System,1-Cell Setup
Components
Load Frame (choose 1 below)
50kN (11240 lbf) capacity HM-5030.3F 1
Manual Pressure Control System, 3-Cell Setup
Components
Load Frame (choose 1 below)
50kN (11240 lbf) capacity HM-5030.3F 1
15kN (3372 lbf) capacity HM-5020.3F 1 15kN (3372 lbf) capacity HM-5020.3F 1
Load/Strain/Pore Pressure Load/Strain/Pore Pressure
Load Cell HM-2300.020 1 Load Cell HM-2300.020 1
Strain Transducer (LSCT) HM-2310.20 1 Strain Transducer (LSCT) HM-2310.20 1
Ball Seat Adapter HM-200387 1 Ball Seat Adapter HM-200387 1
Strain Transducer Bracket HM-4178BRT 1 Strain Transducer Bracket HM-4178BRT 1
UU Triaxial Software Module HM-5002SW 1 UU Triaxial Software Module HM-5002SW 1
CU Triaxial Software Module HM-5003SW 1 CU Triaxial Software Module HM-5003SW 1
CD Triaxial Software Module HM-5006SW 1 CD Triaxial Software Module HM-5006SW 1
Pressure Humboldt Logger HM-5320.3F 1
Pressure Distribution Panel HM-4164.3F 1 Pressure
Air/Water Bladder HM-4151A 2 Pressure Distribution Panel HM-4165.3F 1
De-airing System HM-4187A.3F 1 Air/Water Bladder HM-4151A 6
Pore Pressure Transducer HM-4170 1 De-airing System HM-4187A.3F 1
HM-4220 or Pore Pressure Transducer HM-4170 3
Silent Air Compressor 1
HM.4220.4F HM-4220 or
Silent Air Compressor 1
H-1763A or HM.4220.4F
Vacuum Pump 1
H-1763A.4F H-1763A or
Vacuum Pump 1
Volume Change H-1763A.4F
Volume Change Apparatus Volume Change
HM-2315 1
(Required for CU & CD Triaxial)
Volume Change Apparatus
HM-2315 3
Strain Transducer, 1'' (25mm) HM-2310.10 1 (Required for CU & CD Triaxial)

LSCT/LVDT Mounting Bracket HM-2310BR 1 Strain Transducer, 1'' (25mm) HM-2310.10 3

Triaxial Cell (choose 1 below) LSCT/LVDT Mounting Bracket HM-2310BR 3
3"/ 75mm dia. capacity HM-4199B 1 Triaxial Cell (choose 1 below)
4"/ 100mm dia. capacity HM-4199B-4 1 3"/ 75mm dia. capacity HM-4199B 3
Top Cap/ Base Pedestal Set 4"/ 100mm dia. capacity HM-4199B-4 3
HM-4199.XX 1
(specify specimen size) Top Cap/ Base Pedestal Set
HM-4199.XX 3
Installation Kit HM-4167 1 (specify specimen size)
Installation Kit HM-4167 1
Standard Triaxial Sample Prep Accessories:
(See page 138 for a complete list and description. Items with .XX require a sample size)
Triaxial Installation Kit Accessory Item # Required Accessory Item # Required
Kit designed to provide fittings, connectors, Acrylic Base Disk HM-4179.XX 2 or 6 2-Part Compaction Mold HM-3818.XX 1
tubing and tools to complete a triaxial set
Membranes HM-4180.XX 1 2-Part Vacuum Split Mold HM-3827.XX 1
up installation. See page 136 for kit con-
tents and other individual set up items. Membrane Stretcher HM-4181.XX 1 Split Miter Box HM-3847.XX 1
O-Rings (12-pack) HM-4182.XX 1 Filter Paper (100-pack) HM-4189.XX 1
O-Ring Placing Tool HM-4183.XX 1 Filter Strips HM-4189FS 1
Porous Stone HM-4184.XX 2 or 6 High Vacuum Grease HM-4198 1
Membrane Tester HM-4185.XX 1

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 Testing Equipment for Construction Materials

INCREASE

Testing Equipment for Construction Materials

SOIL MECHANICS

Data Logger

5320 BACK

INCREASE INCREASE INCREASE

FRONT

INCREASE INCREASE INCREASE

MASTER LOADER
FRONT
5030

BACK
PANEL CONNECTIONS

DRAIN TAP VACCUM COMPRESSED DE-AIRED TAP AIR

WATER IN AIR WATER IN WATER OUT VACCUM
LOAD CELL LSCT AIR

Back panel of Load Frame

DE-AIRED WATER TAP WATER VACUUM

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

PORE WATER PRESSURE
Drain Tap Water
DeAired Water

Vaccum Compressed Air

Triaxial Setups

Manual Pressure Control System, 3-Cell Setup

131
132
Triaxial Setups SOIL MECHANICS

TRIAXIAL FlexPanels Pressure Control

Component List for 1 and 3-Cell Triaxial/Permeability System
with FlexPanel Pressure Control
FlexPanel Pressure Control System,1-Cell Setup

15kN (3372 lbf) capacity

Components
Load Frame (choose 1 below)
50kN (11240 lbf) capacity HM-5030.3F
HM-5020.3F
1
1
FlexPanel Pressure Control System, 3-Cell Setup

50kN (11240 lbf) capacity

15kN (3372 lbf) capacity
Components
Load Frame (choose 1 below)
HM-5030.3F
HM-5020.3F
1
1
Load/Strain/Pore Pressure Load/Strain/Pore Pressure
Load Cell HM-2300.020 1 Load Cell HM-2300.020 1
Strain Transducer (LSCT) HM-2310.20 1 Strain Transducer (LSCT) HM-2310.20 1
Pore Pressure Transducer HM-4170 1 Pore Pressure Transducer HM-4170 3
Ball Seat Adapter HM-200387 1 Ball Seat Adapter HM-200387 1
Strain Transducer Bracket HM-4178BRT 1 Strain Transducer Bracket HM-4178BRT 1
UU Triaxial Software Module HM-5002SW 1 UU Triaxial Software Module HM-5002SW 1
CU Triaxial Software Module HM-5003SW 1 CU Triaxial Software Module HM-5003SW 1
CD Triaxial Software Module HM-5006SW 1 CD Triaxial Software Module HM-5006SW 1
Pressure Humboldt Logger HM-5320.3F 1
Pressure Distribution Panel HM-4150.3F 1 Pressure
De-airing System HM-4187A.3F 1 Pressure Distribution Panel HM-4150.3F 1
HM-4220 or Pressure Distribution Panel HM-4160A 1
Silent Air Compressor 1
HM.4220.4F De-airing System HM-4187A.3F 1
H-1763A or HM-4220 or
Vacuum Pump 1 Silent Air Compressor 1
H-1763A.4F HM.4220.4F
Volume Change H-1763A or
Vacuum Pump 1
Volume Change Apparatus H-1763A.4F
HM-2315 1
(Required for CD Triaxial)
Volume Change
Strain Transducer, 1'' (25mm) HM-2310.10 1
Volume Change Apparatus
HM-2315 3
LSCT/LVDT Mounting Bracket HM-2310BR 1 (Required for CD Triaxial)
Triaxial Cell (choose 1 below) Strain Transducer, 1'' (25mm) HM-2310.10 3
3"/ 75mm dia. capacity HM-4199B 1 LSCT/LVDT Mounting Bracket HM-2310BR 3
4"/ 100mm dia. capacity HM-4199B-4 1 Triaxial Cell (choose 1 below)
Top Cap/ Base Pedestal Set 3"/ 75mm dia. capacity HM-4199B 3
HM-4199.XX 1
(specify specimen size) 4"/ 100mm dia. capacity HM-4199B-4 3
Installation Kit HM-4167 1 Top Cap/ Base Pedestal Set
HM-4199.XX 3
(specify specimen size)
Installation Kit HM-4167 1
Standard Triaxial Sample Prep Accessories:
(See page 138 for a complete list and description. Items with .XX require a sample size)

Triaxial Installation Kit Accessory Item # Required Accessory Item # Required

Kit designed to provide fittings, connectors, Acrylic Base Disk HM-4179.XX 2 or 6 2-Part Compaction Mold HM-3818.XX 1
tubing and tools to complete a triaxial set Membranes HM-4180.XX 1 2-Part Vacuum Split Mold HM-3827.XX 1
up installation. See page 136 for kit con-
tents and other individual set up items. Membrane Stretcher HM-4181.XX 1 Split Miter Box HM-3847.XX 1
O-Rings (12-pack) HM-4182.XX 1 Filter Paper (100-pack) HM-4189.XX 1
O-Ring Placing Tool HM-4183.XX 1 Filter Strips HM-4189FS 1
Porous Stone HM-4184.XX 2 or 6 High Vacuum Grease HM-4198 1
Membrane Tester HM-4185.XX 1

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 Master Controller HM-4150 Distribution Panel HM-4150A Distribution Panel HM-4150A Distribution Panel
FRONT BACK
Data Logger

5320

VACUUM VACUUM VACUUM VACUUM VACUUM VACUUM VACUUM VACUUM VACUUM

PRESSURE

OFF VENT OFF VENT OFF VENT OFF VENT OFF VENT OFF VENT OFF VENT OFF VENT OFF VENT

PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE

AIR SUPPLY
INCREASE

INCREASE INCREASE INCREASE INCREASE INCREASE INCREASE INCREASE INCREASE INCREASE

CELL BASE TOP CELL BASE TOP CELL BASE TOP

PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE

VACUUM SUPPLY
INCREASE

OFF OFF OFF

DEAIRED WATER TANK
VACUUM OFF OFF OFF

BIAS ON BRIDGE ON BIAS ON BRIDGE ON BIAS ON BRIDGE ON

SOIL MECHANICS

OFF

PRESSURE

FILL

OFF

OFF OFF OFF OFF OFF OFF OFF OFF OFF

DRAIN
EXTERNAL EXTERNAL EXTERNAL EXTERNAL EXTERNAL EXTERNAL EXTERNAL EXTERNAL EXTERNAL

TAP WATER
OFF OFF OFF OFF OFF OFF OFF OFF OFF

OFF
BURETTE BURETTE BURETTE BURETTE BURETTE BURETTE BURETTE BURETTE BURETTE

DEAIRED WATER
CELL BASE TOP CELL BASE TOP CELL BASE TOP
OUTPUT
FILL FILL FILL FILL FILL FILL FILL FILL FILL
PRESSURE

OFF OFF OFF OFF OFF OFF OFF OFF OFF

OFF

DRAIN DRAIN DRAIN DRAIN DRAIN DRAIN DRAIN DRAIN DRAIN

VACUUM
OUTPUT

MASTER LOADER

5030

AIR

Back OF FLEXPANEL CONTROL WATER Back OF FLEXPANEL AUXILLIARY

VAC PRESS PRESS DEAIRED TAP DRAIN READOUT VAC PRESS DEAIRED DRAIN READOUT

Back panel of Load Frame

Tap Water
DeAired Water

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

Vacuum Compressed Air

LOAD CELL LSCT AIR

DE-AIRED WATER TAP WATER VACUUM

CELL PRESSURE BASE PRESSURE PORE WATER PRESSURE

Triaxial Setups

FlexPanel Pressure Control System, 3-Cell Setup

133
134
Triaxial Setup Components
ponents SOIL MECHANICS

HM-5250.3F HM-2315
HM-5240.3F Shown with HM-2310
Transducer and HM-
2310BR Bracket

Pneumatic Pressure Controller, 150psi (1000kpa) the use of a computer. Operator could see all the
Specifications
The HM-5240.3F is a fully-automated pneumatic data in several formats at the controller while the
pressure controller, which is highly accurate up to Maximum Pressure 150psi (1000kpa) test is running. Then can be viewed simultaneously
150psi (1000kpa) in pressure and 100cc (100ml) 100cc (100ml) in or downloaded later to a computer in the lab, in the
Volume Capacity
volume in any one direction. It is designed spe- any one direction next room or at a different location, while also pro-
cifically for geotechnical laboratory triaxial testing 110-220V 50/60Hz - viding report generation capabilities from within
(UU, CU and CD) and provides control and moni- Voltage Humboldt’s NEXT software or our enhanced test-
5.0 amps
toring of cell pressure, back pressure, pore water specific modules.
13" x 11.5" x 22"
measurement and volume change when used with Dimension (L x W x H)
(330 x 292 x 559mm) Specifications
our Elite Series load frames.
The HM-5240 provides four (4) integral and inde- Pressure Controller, HM-5240.3F Maximum Pressure 500psi (3500kpa)
pendent data acquisition channels, which can be Shipping wt. 40 lb (18.1kg) Volume Capacity 200cc (200ml)
utilized in stand-alone configuration or accessed Hydraulic Pressure Controller, 500psi (3500kpa) 110-220V 50/60Hz -
through a LAN-networked computer using Hum- Voltage
The HM-5250.3F is a fully-automated hydraulic 8.0 amps
boldt’s NEXT software. The unit is built with dura-
pressure controller, which is highly accurate up to
ble high-quality components and features the use 13" x 11.5" x 22"
500psi (3500kpa) in pressure and 200cc (200ml) in Dimension (L x W x H)
of two electronic regulators to ensure smooth and (330 x 292 x 559mm)
volume. It is designed specifically for geotechni-
reliable operation of pressures, as well as precise
cal laboratory triaxial testing (UU, CU and CD) and Pressure Controller, HM-5250.3F
results.
provides control and monitoring of cell pressure, Shipping wt. 75 lb (34kg)
In stand-alone mode, this pressure controller pro- back pressure, pore water measurement and vol-
Volume Change Apparatus, Automatic
vides a 7” (178mm) touch-screen controller. This ume change when used with our Elite Series load
The apparatus is used for measuring the volume
new waterproof, touch screen provides colorful, frames.
change of a soil sample by monitoring the flow of
at-a-glance monitoring of testing functions with-
The HM-5250 provides four (4) integral and inde- water through the chamber of the unit. The lower
out the use of a computer. Operator could see all
pendent data acquisition channels, which can be assembly contains changeover valves, which when
the data in several formats at the controller while
utilized in stand-alone configuration or accessed used in conjunction with the upper assembly pro-
the test is running. Then can be viewed simultane-
through a LAN-networked computer using Hum- vides limitless capacity. The unit can be used with
ously or downloaded later to a computer in the lab,
boldt’s NEXT software. The unit is built with dura- a linear strain transducer, a digital indicator, or as
in the next room or at a different location, while
ble, high-quality components and features the use part of an automated system. It is accurate to bet-
also providing report generation capabilities from
of stepper motors and precision gears to ensure ter than ±0.05 ml and is easily de-aired in seconds.
within Humboldt’s NEXT software or our enhanced
smooth and reliable operation of pressures, as well Includes connectors, valves, and tubing. Order
test- specific modules.
as precise results. strain transducer or digital indicator separately.
In stand-alone mode, this pressure controller pro- Volume Change Apparatus HM-2315
vides a 7” (178mm) touch-screen controller. This Shipping wt. 22 lb (9.9kg)
new waterproof, touch screen provides colorful,
at-a-glance monitoring of testing functions without

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 135
SOIL MECHANICS Triaxial Setup Components

HM-4170

HM-4222
HM-4151A

HM-4187H

HM-2310.10

HM-4187A.3F
HM-2310BR HM-4221
HM-4223

Air/Water Bladder Cylinder De-Airing Water Tank life. This refrigeration dryer, thanks to its PlusPack
The Humboldt air/water bladder cylinder is used For use with Triaxial/Permeability Distribution Pan- heat exchanger and the most compact dimensions
to deliver pressurized de-aired water to the triaxial els. Requires a Vacuum Pump, (see page 136). on the market, will prove a major asset in your
cell. The bladder acts as an reservoir and interface De-Airing Water Tank HM-4187H lab. Dryer uses a 1/2" NPT-F pipe size and nom-
between the compressed air, used as the pressure Shipping wt. 17 lb (7.7kg) inal flow is: 10 SCFM, 17 Nm3/hr and 0.3 Nm3/
source, and the de-aired water, which is used as the min. based on an ambient and inlet temperature
Strain Transducer
pressurizing medium for the sample. The use of the of 100°F (38°C) and a working pressure of 100 psig
Strain transducer, 1" (25mm) for use with HM-2315
bladder eliminates the reintroduction of air into (7 bar)
automatic volume change apparatus
the de-aired water, while providing a high-degree Refrigeration Dryer, 115V 60Hz 1ph HM-4221
Strain Transducer HM-2310.10
of accuracy. The cylinder will operate continuously Shipping wt. 20 lb (9.1kg)
Shipping wt. 1 lb (0.45kg)
to a maximum pressure of 150 psi (1000 kPa). It is Desiccant Dryer
constructed of anodized aluminum top and bot- Transducer Bracket
Ideal for drying small volumes of air at the point
tom plates, acrylic cylinder and a fluoroelastomer Bracket to attach strain transducer to HM-2315
of use. Convenient in-line mounting saves space.
bladder. automatic volume change apparatus
ISO Class 2 dryer. Max. operating pressure is 150
Bladder Cylinder HM-4151A Transducer Bracket HM-2310BR
psig. and max operating temperature is 125°F.
Shipping wt. 11 lb (4.9kg) Shipping wt. 0.1 lb (0.04kg)
Total capacity is 4400 ft3, Female NPT inlet/out-
Bladder Pore Pressure Transducer let size is 0.25 NPTF, bowl size is 1.75 lbs, Height
Replacement bladder for HM-4151A Air/Water Highly accurate, 200 psi (1400 kPa) pore pressure 11 Inches, Width 4.625", Includes one charge of
Bladder Cylinder. transducer. Designed for geotechnical lab appli- desiccant
Bladder HM-4151.1 cations with outstanding overload protection and Desiccant Dryer HM-4222
Shipping wt. 0.5 lbs (0.22kg) protected from corrosive water. Requires input of 10 Shipping wt. 5 lb (2.3kg)
V DC, with an output of 100 mV. Supplied with 2
De-Airing Water System Filter/Regulator
meter cable and 5-pin DIN plug.
The HM-4187A.3F produces 8-liter batches of One-piece, Filter/Regulator, 0-125 psi (0 - 8.6 bar)
de-aired water without the use of heat. Com- Pore Pressure Transducer HM-4170 with standard filtration of 5 micron. Height is 9.77
Shipping wt. 0.8 lb (0.36kg)
bined mechanical agitation and vacuum evacu- and width is 2.36. Bowl material is polycarbonate
ation removes gasses at much higher rate than Refrigeration Dryer and includes sight glass and pressure gauge.
conventional heat-boiling methods. Will de-air Compressed air quality is often overlooked in Filter/Regulator HM-4223
water to less than 0.5 pph dissolved oxygen in 4 many labs. Compressed air contains condensate Shipping wt. 1.48lb (0.67kg)
minutes. Requires a vacuum pump, (see page 136) which, when cooled, will turn into water, causing
1/55hp motor 110V, 60Hz. 7.5 x 7.5 x 20" (190 x extensive damage to both the compressed air net-
190 x 508mm). work and testing equipment. Refrigeration dryers
De-Airing System, 120/220V 50/60Hz HM-4187A.3F actively remove this condensate to achieve near
Shipping wt. 24.5 lb (11.3kg) perfectly dry compressed air. The benefits are
notable: less system downtime, reduced costs
and maintenance, and improved test equipment

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

136
Triaxial Setup Accessories SOIL MECHANICS

HM-4220 HM-4168

HM-4167

HM-003175
HM-4150.45
HM-4196.12
HM-4196.25

H-1763A HM-4150.72 HM-4150.22AS

HM-4197.25 HM-4197.12 HM-4150.78 HM-003176 HM-4150.44
Compressor Triaxial Installation Kit Shear & Consolidation Installation Kit
When operating under full load this exception- Kit designed to provide fittings, connectors, tubing Kit designed to provide fittings, connectors, tubing
ally quiet compressor offers a tremendously low and tools to complete a triaxial set up installation. and tools to complete a triaxial set up installation.
noise level of 40 db/A. Each compressor is built Kit includes items in the table below. All items can Kit includes items in the table below. All items can
with quality in mind, and comes equipped with be purchased individually as well. be purchased individually as well.
powder-coated air tank, pressure switch, 1-micron Triaxial Kit Components
air filter, regulator, and pressure gauges for com- Shear & Consolidation Kit Components
pletely automatic and trouble free operation. .125" Brass Ferrules (10) HM-4197.12 .25" OD Tubing, 100ft. HM-4196.25
.25" Brass Ferrules (10) HM-4197.25
Specifications .375" to .25" Reducer Bushing (3) HM-4150.77
.125" OD Tubing, 10ft. HM-4196.12
Output 4.2 CFM120 L.Min Cutter, Flexible Tubing (1) HM-000058
Horse Power 1.0Hp .25" OD Tubing, 100ft. HM-4196.25
Thread Tape, PTFE (1) HM-000059
Tank Size 13 Gal50 Lt. .375" to .25" Reducer Bushing (3) HM-4150.77
Wrench, Adjustable, 6" (1) HM-000064
Noise Level 42 db/A Cutter, Flexible Tubing (1) HM-000058 Union T Fitting, .25" (5) HM-4150.45
Max Pressure 120 PSI (8 Bar) Thread Tape, PTFE (1) HM-000059 Quick Valve Coupling, .25" (2) HM-4150.72
Operating Pressure 90-120 PSI6-8 Bar Hex wrench, 3/16" (1) HM-000060 Regulator Elbow, .25" (3) HM-4150.44
Compressor, 120V 50/60Hz HM-4220 Hex wrench, 7/64" (1) HM-000061 Tube Fitting T, 6mm OD (5) HM-003175
Compressor, 220V 50/60Hz HM-4220.4F Hex wrench, 2.5mm (1) HM-000062
Shipping wt. 147 lbs (66kg)
Push-to-Connect Tube Fitting
HM-003176
Wrench, 7/16 & 9/16" (1) HM-000063 Coupler, .25" OD (4)
High-Vacuum Pump
Direct-drive two-stage rotary sliding vane high vac- Wrench, Adjustable, 6" (1) HM-000064
Shear & Consolidation Installation Kit HM-4168
uum pump features gas ballast and trap to reduce Union T Fitting, .25" (5) HM-4150.45 Shipping wt. 4.5 lbs (2.04kg)
risk of oil being sucked into the system. Produces Quick Valve Coupling, .25" (2) HM-4150.72
free air displacement 85L per minute (3 cu. ft. per
Regulator Elbow, .25" (3) HM-4150.44
minute) and maximum vacuum 29-30". Operating Replacement Pressure Regulators
temperature is 30 to 170°F (-1.11 to 76.6°C). Has .25" to .125" Reducer Coupling (3) HM-4150.78
Pressure regulator
0.25" OD intake ports for 0.25" ID tubing. Dimen- Tube Fitting T, 6mm OD (5) HM-003175 HM-4150.22AS
2-150 psi w/ fittings
sions: 11.25" x 15.5" x 6.5" (28.6 x 39.4 x 16.5cm).
Push-to-Connect Tube Fitting Positive bias
High-Vacuum Pump, 120V 60Hz H-1763A HM-003176 HM-4150.23AS
Coupler, .25" OD (4) regulator w/ fittings
High-Vacuum Pump 230V 50/60Hz H-1763A.4F
Shipping wt. 31 lbs (14kg) Plug, .25" Nylon (5) HM-003193
O-ring (Upper Cap), .125" (10) HM-4150.006

O-ring for Quick-Connect (10) HM-4196.CXO

Triaxial Installation Kit HM-4167

Shipping wt. 4.5 lbs (2.04kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 137
SOIL MECHANICS Triaxial Sample Prep

HM-4198

HM-3130 HM-4189FS

HM-4174
HM-4174M

HM-4173

HM-3818.28 HM-3130.20
HM-3175

Compaction Mold, Two-Part Top Platens for Soil Trimmer High-Vacuum Grease
Two-part aluminum molds with easy-close band Individual, sized, top platens for the soil sample Effective means of sealing latex membranes to
clamp closure. Molds include base plate and ped- trimmer. Platens are interchangeable. sides of the top cap.
estal, which provides a stable platform for mold High-Vacuum Grease HM-4198
Size Model Size Model
during production. Ratio of sample height to diam- Shipping wt. 0.8 lb (0.36kg)
eter is 2:1 1.0" HM-3130.10 4.0" HM-3130.40
Filter Paper Strips
Sample Size Mold with Base Plate 1.4" HM-3130.14 35mm HM-3130.35 Wrapped around sample to accelerate saturation
1.4" HM-3818.14 1.875" HM-3130.18 38mm HM-3130.38 in triaxial testing, 5 x 150mm, Grade 55, 100/pkg.

1.5" HM-3818.15 2.0" HM-3130.20 50mm HM-3130.50 Filter Paper Strips HM-4189FS
Shipping wt. 0.5 lb (0.22kg)
1.875" HM-3818.18 2.5" HM-3130.25 70mm HM-3130.70
Precision Diameter Tape
2.0" HM-3818.20 2.8" HM-3130.28 100mm HM-3130.100
ASTM D2166, D2850, D4767, BS 1377:8
2.36" HM-3818.23 3.0" HM-3130.30 Diameter tapes provide a fast, reliable method
2.5" HM-3818.25 Top Platens for Soil Trimmer See Chart for measuring the diameter of concrete, soil and
Shipping wt. 1 lb (0.45kg) asphalt cores and cylinders. One reading pro-
2.8" HM-3818.28
vides round and out-of-round diameters within
4.0" HM-3818.40 Length Comparator
an accuracy of .001" (.03mm) by means of special
ASTM D2166, D2850, D4767, BS 1377:8
6.0" HM-3818.60 graduations and vernier scale. All tapes are made
Length comparator designed to quickly and accu- from a stainless alloy and are precision engraved
35mm HM-3818.35
rately measure the height of soil samples to within to ensure accuracy. Inch-scale tape has a diameter
38mm HM-3818.38 ±0.1% of the total height. Includes a digital indi- range of 0.75 to 7" and the metric-scale tape has
50mm HM-3818.50 cator accurate to within 0.0001 inches (0.002mm) a diameter of 28 to 200mm. Includes certificate
with 0 to 1" (0 to 25mm) total range. The compara- of calibration. Tapes are calibrated and include a
70mm HM-3818.70
tor is comprised of an upright support 14" (356mm) NIST-traceable certification.
100mm HM-3818.100 tall attached to a 6" x 6" x 2" (150 x 150 x 50mm)
Precision Diameter Tape, 0.75 to 7" HM-4174
150mm HM-3818.150 granite base and includes a 6" (152mm) reference
Precision Diameter Tape, 28 to 200mm HM-4174M
bar. Other reference bars such as 4.0", 3.0" and
Compaction Mold, Two-Part See Table Shipping wt. 0.8 lb (0.36kg)
2.0" for other sample sizes are available. Reference
Shipping wt. 15 lbs (6.8kg)
bar includes Calibration Report traceable to the
Soil Sample Trimmer National Institute of Standards and Technology.
Sample trimmer for cutting samples to precise Length Comparator HM-4173
diameters. The HM-3130 handles samples up to Shipping wt. 20 lb (9.07kg)
3" and HM-3140 handles up to 4" samples by
Wire Saw
employing easily interchangeable top platens.
Sample trimming saw with replaceable wire blade.
Stainless steel pins in pedestal & top platen hold
sample in position. Top platen bearing assembly Wire Saw HM-3175
Shipping wt. 1 lbs (0.45kg)
is lowered & locked and sample trimmed with wire
saw, order top platens and saw separately. Wire Saw Blade
Soil Sample Trimmer, 1" to 3" HM-3130 Replacement wire for HM-3175 saw.
Soil Sample Trimmer, 1" to 4" HM-3140 Wire Saw Blade HM-3175.1
Shipping wt. 7 lb (3.1kg) Shipping wt. 0.1 lb (0.04kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

138
Triaxial Sample Prep SOIL MECHANICS

HM-4179.28

HM-4182.28
HM-4180.28

HM-3847.28
HM-4181.28
HM-4185.28
HM-4183.28
HM-3827.28
HM-4186.28
HM-4184.28 HM-4189.28

35mm 38mm 50mm 70mm 100mm 150mm 1.4" 1.5" 2.0" 2.8" 4.0" 6.0"
Latex Membranes, 0.012"
HM-4180.14 HM-4180.15 HM-4180.20 HM-4180.28 HM-4180.40 HM-4180.60 HM-4180.14 HM-4180.15 HM-4180.20 HM-4180.28 HM-4180.40 HM-4180.60
Latex Membranes, 0.025" HM-4180.14T HM-4180.15T HM-4180.20T HM-4180.28T HM-4180.40T HM-4180.60T HM-4180.14T HM-4180.15T HM-4180.20T HM-4180.28T HM-4180.40T HM-4180.60T
Made from non-porous latex rubber [max. temp. 220°F (104°C)]. Length varies according to sample diameter. All have sufficient length to enclose full length of
sample, both top & base of pedestal, and disc—plus enough surplus to allow doubling over the O-rings. 12/pkg. Membranes are 0.012" or 0.025"in thickness.

Membrane 35mm 38mm 50mm 70mm 100mm 150mm 1.4" 1.5" 2.0" 2.8" 4.0" 6.0"
Stretcher HM-4181.14 HM-4181.15 HM-4181.20 HM-4181.28 HM-4181.40 HM-4181.60 HM-4181.14 HM-4181.15 HM-4181.20 HM-4181.28 HM-4181.40 HM-4181.60
Simple & effective method of sheathing (encasing) sample with latex membrane without creasing or damaging the sleeve.

35mm 38mm 50mm 70mm 100mm 150mm 1.4" 1.5" 2.0" 2.8" 4.0" 6.0"
O-Rings
HM-4182.14 HM-4182.15 HM-4182.20 HM-4182.28 HM-4182.40 HM-4182.60 HM-4182.14 HM-4182.15 HM-4182.20 HM-4182.28 HM-4182.40 HM-4182.60
For sealing membranes from confining fluid and sample. Neoprene. 12/pkg.
35mm 38mm 50mm 70mm 100mm 150mm 1.4" 1.5" 2.0" 2.8" 4.0" 6.0"
O-Ring Placing Tool
HM-4183.14 HM-4183.15 HM-4183.20 HM-4183.28 HM-4183.40 HM-4183.60 HM-4183.14 HM-4183.15 HM-4183.20 HM-4183.28 HM-4183.40 HM-4183.60
Positions rings to seal membrane with minimum disturbance to specimen.

Porous 35mm 38mm 50mm 70mm 100mm 150mm 1.4" 1.5" 2.0" 2.8" 4.0" 6.0"
Stones HM-4184.35 HM-4184.38 HM-4184.50 HM-4184.70 HM-4184.100 HM-4184.150 HM-4184.14 HM-4184.15 HM-4184.20 HM-4184.28 HM-4184.40 HM-4184.60
Used for permeability and triaxial testing to allow even distribution of water through sample. Two stones required per cell, each 1/4” thick (6mm).
35mm 38mm 50mm 70mm 100mm 150mm 1.4" 1.5" 2.0" 2.8" 4.0" 6.0"
Membrane Tester
HM-4185.14 HM-4185.15 HM-4185.20 HM-4185.28 HM-4185.40 HM-4185.60 HM-4185.14 HM-4185.15 HM-4185.20 HM-4185.28 HM-4185.40 HM-4185.60
Tester is easy to use for quick visual detection of possible flaws in membranes.
35mm 38mm 50mm 70mm 100mm 150mm 1.4" 1.5" 2.0" 2.8" 4.0" 6.0"
2-Part Split Miter Box
HM-3847.35 HM-3847.38 HM-3847.50 HM-3847.70 HM-3847.100 HM-3847.150 HM-3847.14 HM-3847.15 HM-3847.20 HM-3847.28 HM-3847.40 HM-3847.60
For use with undisturbed samples and for sample trimming of cohesive soils. Made from non-ferrous metal.

35mm 38mm 50mm 70mm 100mm 150mm 1.4" 1.5" 2.0" 2.8" 4.0" 6.0"
2-Part Vacuum Split Former
HM-3827.35 HM-3827.38 HM-3827.50 HM-3827.70 HM-3827.100 — HM-3827.14 HM-3827.15 HM-3827.20 HM-3827.28 HM-3827.40 HM-3827.60
For use with non-cohesive soils and disturbed samples. Made from non-ferrous metal. Larger sizes require use of supporting jacks.

35mm 38mm 50mm 70mm 100mm 150mm 1.4" 1.5" 2.0" 2.8" 4.0" 6.0"
Sample Trimmer with Knife
HM-4186.14 HM-4186.15 HM-4186.20 HM-4186.28 HM-4186.40 HM-3847.60 HM-4186.14 HM-4186.15 HM-4186.20 HM-4186.28 HM-4186.40 HM-3847.60

Used to trim sample ends or cut sample to a specific length.

35mm 38mm 50mm 70mm 100mm 150mm 1.4" 1.5" 2.0" 2.8" 4.0" 6.0"
Filter Paper
HM-4189.15 HM-4189.15 HM-4189.20 HM-4189.28 HM-4189.40 HM-4189.60 HM-4189.15 HM-4189.15 HM-4189.20 HM-4189.28 HM-4189.40 HM-4189.60
Used to prevent soil from penetrating into porous stones or into a panel. 100/pkg.

35mm 38mm 50mm 70mm 100mm 150mm 1.4" 1.5" 2.0" 2.8" 4.0" 6.0"
Acrylic Disk
HM-4179.35 HM-4179.38 HM-4179.50 HM-4179.70 HM-4179.100 HM-4179.150 HM-4179.14 HM-4179.15 HM-4179.20 HM-4179.28 HM-4179.40 HM-4179.60
Acrylic disk used in UU triaxial tests.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 139
SOIL MECHANICS Data Acquisition

HM-5320.3F HM-5330.3F

Specifications Humboldt Elite Series Data Loggers room or at a different location, while also providing
Humboldt's Elite Series Data Loggers are specifi- report generation capabilities from within Hum-
7" (178mm) VGA (480
cally designed for use within construction materials boldt's NEXT software or our enhanced test-spe-
Display x 800) Resistive-touch
screen testing labs. You can use Humboldt Data Loggers cific modules.
to cost-effectively update your older, non-comput- When operated from a networked computer the
Real-time test data Graphic and tabulation
erized load frames, direct shear and consolidation NEXT software provides robust machine and test
Processor Dual 32-bit ARM machines with computerized data acquisition— control, and report generation. It also allows the
RAM 64MB increasing lab output, freeing-up technicians and ability to control and monitor multiple machines
Memory, providing more accurate test results. from a single computer.
4GB
non-volatile Humboldt's modular-design, data acquisition con- Humboldt Elite Series Data Logger, Analog
Analog to digital cept is designed to give you the most flexible and
24 bit Provides four individual, 24-bit analog to digital convert-
converter cost-effective method of data logging for your lab.
ers with an instrumentation excitation supply of 10 VDC.
Data acquisition 4 Channels Rather than having to buy into a large data logging
The analog Logger is ideal for use with instruments,
system and then growing into it, Humboldt Data
up to 50 readings such as pressure transducers, load cells, and strain trans-
Logging speed Loggers give you the flexibility and low cost outlay
per second ducers. It provides data storage for 1000 readings per
of being able to buy loggers on an "as you grow"
channel.
Multi-test storage 1000 basis, increasing your data logging capability as
Humboldt Elite Series Data Logger, Analog HM-5320.3F
Points per test 3000 your expansion demands.
Shipping wt. 5lb (2.2kg)
use to export data Humboldt Data Loggers can be used with
Humboldt Elite Series Data Logger, Digital
and import/export a wide variety of transducers, load cells and
calibration data, also Provides four individual, Digital Indicator inputs with an
USB port (front) digital indicators; and both come with Hum-
use to provide external instrumentation excitation supply of 5 VDC. The digital
boldt's, highly-regarded, NEXT software. This
power for optional Logger is ideal for use with digital indicators. It provides
WIFI adapter software provides robust data acquisition,
data storage for 1000 readings per channel.
calibration and report generation for those
provides external Humboldt Elite Series Data Logger, Digital HM-5330.3F
USB port (back) power at the back of wanting to use a computer to monitor tests
Shipping wt. 6 lb (2.7kg)
the machine and collect test data.
In stand-alone mode, these data loggers provide Digital Indicator Cable, 6ft.
for network
Ethernet connection For use with HM-4469 & HM-4470 Series digital
connectivity a 7" (178mm) touch-screen controller, which pro-
vides real-time, visual views of your data in both gauges when used with Elite Series Machines and
Emergency stop Large button
tabular and graphic formats. These new water- Digital Data Logger.
24-bit differential Digital Indicator Cable, 6 ft. HM-4470C
proof, touch screens provide colorful, at-a-glance
analog to digital Shipping wt. 6 lb (2.7kg)
monitoring of testing functions without the use of a
converter 4
computer. Operators can see all the data in several
(21 bits @1000
samples/sec. formats at the machine while the test is running.
Data can then be viewed simultaneously or down-
Ambient tempera-
1 loaded later to a computer in the lab, in the next
ture sensor:
Limit switches 4
Firmware Update Ethernet or flash drive

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

140
Data Acquisition SOIL MECHANICS

HM-2300.020

HM-2003E

HM-2300.020P
shown mounted
HM-2300.100 on crossbar with
LSCT and ram

H-4178.2
HM-2300.020S

S-type Load Cells Submersible Load Cells Pancake Load Cells

Load cells are bi-directional for compression loads. For those concerned with reducing the effects of Pancake-design load cells are available for those
Constructed from stainless steel. Load cells can hysteresis on testing results, we offer a submersible who want to use a load cell design that theoret-
be used with various instrumentation to measure load cell, which is designed to work within the tri- ically provides the least amount of deflection in
loads. Includes: 6 ft. cable with 5-pin DIN plug axial cell. Positioning the load cell within the triaxial applications.
and calibration certificate. cell eliminates the possible drag effect introduced
Performance Specifications
by using a plunger between the sample and an
Performance Specifications externally-mounted load Overload Capacity: 150%
Excitation voltage: 10 VDC, max.15 VDC Performance Specifications Excitation Voltage: 20 VDC, Maximum
Rated output: 3.0 mv/V minimum Overload Capacity: 200% Non-linearity: 0 ± 0.05% Full Scale Output
Non-linearity: 0.03% full scale Output Excitation Voltage: 10 VDC, Maximum Hysteresis: 0.05% Full Scale Output
Hysteresis: 0.02% FSO Non-linearity: 0 ± 0.05% Full Scale Output Diameter: 4.13" (104.8mm)
Non-repeatability: 0.01% FSO Hysteresis: 0.05% Full Scale Output Cable Length: 79" (2m)
Creep (30 minutes): 0.03% FSO Diameter: 3" (75mm) Height:
2.5" (63.5mm)
Zero balance: ±1.0% FSO (excluding Ram)
Cable Length: 79" (2m)
Bridge resistance: Height: Load Cell, 2000 lbf (10 kN) HM-2300.020P
2" (50mm)
Input: 350 ohms, nominal (excluding Ram) Load Cell, 5000 lbf (25 kN) HM-2300.050P
Load Cell, 10000 lbf (50 kN) HM-2300.100P
Output: 350 ohms, ±3.5 ohms
Load Cell, 1000 lbf (5 kN) HM-2300.010S Load Cell, 15000 lbf (75 kN) HM-2300.150P
Overload: Load Cell, 25000 lbf (125 kN) HM-2300.250P
Load Cell, 2000 lbf (10 kN) HM-2300.020S
Safe static: 150% of capacity Load Cell, 5000 lbf (25 kN) HM-2300.050S Load Cell, 50000 lbf (250 kN) HM-2300.500P
Shipping wt. 1 lb (0.45kg) Shipping wt. 11 lb (5kg)
Ultimate: 175% of capacity
Temperature: Platen, Swivel Top
4.25" (108mm) diameter top swivel platen.
Compensated range: 0-150°F
Platen, Swivel Top HM-2003E
Effect on output: 0.0006% FSO/°F Load Cells are wired for use with Humboldt Shipping wt. 5.2 lb (2.35kg)

Effect on zero: 0.0008% FSO/°F Equipment. Please contact us when needing Stud, Threaded
Nickel-plated wiring for other manufacturers' equipment. Threaded stud for attaching S-type load cells to
Finish:
or stainless steel load frame cross beams.
Seal: Waterproof Stud, Threaded H-4178.2
Shipping wt. 0.2 lb (0.09kg)

Load Cell, 500 lbf (2.5 kN) HM-2300.005

Load Cell, 1000 lbf (5 kN) HM-2300.010
Load Cell, 2000 lbf (10 kN) HM-2300.020
Load Cell, 5000 lbf (25 kN) HM-2300.050
Load Cell, 10000 lbf (50 kN) HM-2300.100
Shipping wt. from 1 lb (0.45kg) to 3.5 lbs (1.6kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 141
SOIL MECHANICS Data Acquisition

HM-4170
HM-2310.10

HM-2305.10 HM-4170B

HM-4172

HM-2350
HM-2360

HM-4193BR
HM-2305BRT

HM-4178BRT HM-4175
HM-2310BR HM-2505BRSO

Linear Strain Conversion Transducers (LSCT) Linear Strain Transducer Bracket tery operated with very long battery life—typically
Extremely accurate and reliable strain gauge instru- Bracket used to mount HM-2305 LSCTs. up to 5 years. On/off button at top of readout has
ments. Compact size does not require a module. factory set “on” time built into the memory. Read-
Linear Strain Transducer Bracket HM-2305BRT
High resolution and performance superior to LVDT. out shuts off automatically after 20 minutes.
Shipping wt. 0.7 lb (0.32kg)
Stainless steel casing for environmental protection. Digital Pressure Transducer HM-4172
Operating temperature range 0 to 70°C. Requires Linear Strain Transducer Bracket
Shipping wt. 2 lbs (0.9kg)
input of 10V dc; output up to 6.5 mV per volt. Bracket used to mount HM-2305 LSCTs to
HM-5120 and HM-5170 for Marshall applications. AC Adapter, 120V 60Hz
• Less than 250g spring force on spindle AC adapter for digital indicator, allows indicator to
• Non-linearity better than ± 0.1% of full scale Linear Strain Transducer Bracket HM-2505BRSO run off AC power.
Shipping wt. 0.7 lb (0.32kg)
deflection AC Adapter, 120V 60Hz HM-4469AC
• Hysteresis-compensated with linearity better Transducer Data Extension Cable Shipping wt. 0.6 lb (0.27kg)
than ± 0.1% of full scale in both directions Data extension cable for use with load cells, LSCT or
Data Cable
pressure devices. Cable is 25ft.(7.6m) length.
• Negligible temperature effect For use with HM-4469 and HM-4470 Series Digital
Transducer Data Extension Cable HM-2310C Gauges when used with Elite Series Machines and
LSCT, 0.4" (10mm) HM-2310.04
Shipping wt. 1 lb (0.45kg)
LSCT, 1.0" (25mm) HM-2310.10 Digital Data Logger. Includes 6ft cable.
LSCT, 2.0" (50mm) HM-2310.20 Pore Pressure Transducer Data Cable HM-4470C
Shipping wt. 0.8 lb (0.36kg) Highly accurate, 200 psi (1400 kPa) pore pressure Shipping wt. 0.5 lb (0.23kg)
Linear Potentiometer Transducers (LPT) transducer. Designed for geotechnical lab appli-
Data Cable
Accurate and reliable strain gauge instruments cations with outstanding overload protection and
Upgrade for HM-4169C Data Cable for use with
for use with Humboldt's HM-5150, HM-5170 and protected from corrosive water. Requires input of
Elite Series Machines and Digital Data Logger.
HM-5120 Load Frames. 10 V DC, with an output of 100 mV. Supplied with 2
Includes 6ft cable.
Linear Potentiometer Transducer 1.0" (25mm) HM-2305.10 meter cable and 5-pin DIN plug.
Data Cable HM-4470U
Linear Potentiometer Transducer 2.0" (50mm) HM-2305.20 Pore Pressure Transducer HM-4170
Shipping wt. 0.5 lb (0.23kg)
Shipping wt. 0.8 lb (0.36kg) Shipping wt. 0.8 lb (0.36kg)
Data Cable
LSCT Displacement Transducer Bracket De-Airing Block
Data cable for digital indicator, used with
Bracket used with CBR piston. For use with pore pressure transducer
HM-2330D.3F Humboldt Logger.
LSCT Displacement Transducer Bracket HM-4178BRT De-Airing Block HM-4170B
Data Cable HM-4469C
Shipping wt. 1 lb (0.45kg)
Shipping wt. 0.7 lb (0.32kg) Shipping wt. 0.5 lb (0.23kg)
LSCT/LVDT Contact/Mounting Bracket Digital Pore Pressure Set
Multi-Device Cable
Bracket used in mounting LSCT to equipment in For accurately measuring and monitoring pore
Allows one computer to control multiple dai-
replacement of dial gauge. water pressures and back pressure. For determin-
sy-chained machines. For Non-elite machines.
ing level of saturation (“B” parameter) during satu-
LSCT/LVDT Mounting Bracket HM-2310BR Multi-Device Cable HM-000379
ration stages of triaxial/permeability tests. Includes
Shipping wt. 0.1 lb (0.04kg) Shipping wt. 1 lb (0.45kg)
readout, pore pressure transducer, and de-airing
LSCT Triaxial Mounting Bracket block assembly. Single-Channel Displays
Bracket used in mounting LSCT or dial gauge to the The HM-2350 provides 4-digit accuracy and the
Digital Pressure Set, 120V 60Hz HM-4175
upper part of a triaxial cell with a 0.625" (15.5mm) HM-2360 provides 6-digit accuracy.
Digital Pressure Set, 220V 50/60Hz HM-4175.4F
dia. ram for strain measurement. (HM-2310BR also
Shipping wt. 7 lb (3.1kg) Single-Channel Display, 120V 60Hz HM-2350
required for use with LSCT.)
Digital Pressure Transducer Single-Channel Display, 220V 50/60Hz HM-2350.4F
LSCT Triaxial Mounting Bracket HM-4193BR Single-Channel Display, 120V 60Hz HM-2360
Solid state transducer/readout unit incorpo-
Shipping wt. 2 lbs (0.9kg)
rates the latest semiconductor technology into a Single-Channel Display, 220V 50/60Hz HM-2360.4F
Shipping wt. 6 lb (2.7kg)
high-quality, yet inexpensive strain gauge. Three-
digit readout display has ±.25% of full scale accu-
racy—comparable to others at twice the cost. Bat-

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

142
Data Acquisition SOIL MECHANICS
H-4466.30
H-4466.15
H-4466.10

H-4470
HM-4470.10
H-4665.25CC
H-4454. 050D H-4158.1 HS-4156.14
Load Rings H-4454. 050 Dial Gauges Will replace any mechanical dial gauge.
ASTM E74 Indicators are built to American gauge design Range Resolution Model
Sometimes referred to as “proving rings,” load specifications for accuracy and are used in field
.250" / 6.35mm HM-4470.02
rings are used with various asphalt, concrete, or and laboratory testing applications. Dials are
soil instrumentation to measure loads, and are high-quality, low-friction type, designed for long .600" / 15.0mm .0001" HM-4470.05
ideal for use with our Master Loader compression life and accurate repeatable readings. All dial indi- 1.0" / 25.4mm .002mm HM-4470.10
machines, direct shear machines and other testing cators have continuous graduations and revolution
2.0" / 50.0mm HM-4470.20
equipment. Our high-quality, tensile steel rings counters that show revolutions of the indicator
hand. They are furnished with a lug back (with a 90° 4.0" / 101.6mm HM-4470.40
have spherical seatings suitable for all shear boxes
and load frames. Each load ring is shipped with a mounting hole to be used vertically or horizontally),
Digital Indicators See Table
fitted gauge or indicator and calibration certificate, a regular contact point .25" long, and a dust cap.
Shipping wt. 1 lb (0.45kg)
and supplied with tables listing all measurement
Range Division Dia. Brake Model Gauge Contact Point Extensions
units. 8.25" (210mm) high, 3/4-16 UNF thread
Used in applications where gauges require longer
female mounting. Available with digital indicators .200" .0001" 2.25" No H-4460
contact points to ensure correct gauge placement.
compatible with data acquisition systems. Eight .200" .0001" 2.25" Yes H-4461A Contact points feature hardened steel points
models range in size from 110 to 22,000 lbf (0.5
.300" .0001" 2.25" No H-4462 with polished tip to prevent scratching. Points
to 100.0 kN).
.500" .0001" 2.25" No H-4471 fit all standard indicators and gauges. Not com-
Load Ring with Digital Indicator patible with H-4471, H-4471CC, H-4465.12, or
1.000" .001" 2.25" No H-4158.1
lbf kN kgf Model H-4465.12CC gauges.
2.000" .001" 2.75" No H-4463
110 0.5 50 H-4454.001D Contact Point Extensions Model
3.000" .001" 2.75" No H-4464
220 1.0 100 H-4454.002D 0.25" (6.4mm) Extension H-4466.2
4.000" .001" 2.75" No H-4465
550 2.5 250 H-4454.005D 0.5" (13mm) Extension H-4466.5
5.000" .001" 2.75" No H-4466
1100 5.0 500 H-4454.010D 1" (25mm) Extension H-4466.10
2200 10.0 1000 H-4454.020D 12mm .002mm 57mm No H-4465.12 1.5" (38mm) Extension H-4466.15
5500 25.0 2500 H-4454.050D 25mm .010mm 57mm No H-4465.25 2" (50mm) Extension H-4466.20

11000 50.0 5000 H-4454.100D 50mm .020mm 70mm No H-4465.50 3" (76mm) Extension H-4466.30

22000 100.0 10000 H-4454.200D 6" (152mm) Extension H-4466.6

All dial gauges above feature clockwise rotation.
Gauge Contact Point Extensions See Table
Load Ring with Dial Indicator Counter-clockwise models are available for all
Shipping wt. 0.1 lb (0.04kg)
lbf kN kgf Model except: H-4465 and H-4462. To order count-
er-clockwise models, add CC to the end of the Magnetic Indicator Mount
110 0.5 50 H-4454.001 Convenient, portable mount for mounting indica-
model number.
220 1.0 100 H-4454.002 tors and gauges. Mount has magnetic base, which
Dial Gauges See Table
550 2.5 250 H-4454.005 Shipping wt. 1.3 lb (0.58kg)
mounts on metallic surfaces. Features non-magnetic
stainless steel holding rod, 6 x 0.25" (154 x 6.4mm),
1100 5.0 500 H-4454.010 Digital Indicators
set in hardened ball socket. Can be mounted in
2200 10.0 1000 H-4454.020 Switchable inch/metric digital indicator is accurate
almost any position.
to ±.0001" (.002mm). Instant zero feature. Locks in
5500 25.0 2500 H-4454.050 Magnetic Indicator Mount H-4470
maximum reading on LCD display with characters
Shipping wt. 1.3 lb (0.58kg)
11000 50.0 5000 H-4454.100 0.240" high and 0.115" wide. Runs either clock-
wise or counter clockwise. Operates with replace- Magnetic Gauge Mount
22000 100.0 10000 H-4454.200
able batteries or AC power with automatic shutoff. Convenient, portable mount for mounting indica-
Load Rings See Tables tors and gauges. Mount has magnetic base, which
Shipping wt. 8 lb (3.7kg) mounts on metallic surfaces.
Magnetic Gauge Mount HS-4156.14
Shipping wt. 1.3 lb (0.58kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 143
SOIL MECHANICS Erosion

Specifications
Flow Rate 0 to 8 meters per second
Accepts 3.0" OD x 2.875"
Specimen Size
(76.2 x 73mm) ID Shelby Tubes
96" x 40" x 96" (2,438 x 1016 x
Dimensions
2438mm) excludes wheels.

Erosion Function Apparatus tem. In comparison with the HEC-18 equation (a 2) Collect soil samples at the site.
The HM-5940 erosion function apparatus (EFA) standard for calculating scour predictions), SRICOS 3) Test samples in the EFA to obtain the erosion
was designed and built to prevent bridge failures generally leads to smaller calculated scour depths rate vs. the hydraulic shear stress applied.
by measuring the erodibility of soil. Used in con- and compares more favorably to actual measured 4) Prepare the velocity hydrograph for the
junction with the SRICOS scour prediction method, scour depths. bridge.
the HM-5940 can provide more accurate erodibil- • 7" touch screen interface
5) Use the SRICOS program with 3 & 4 above
ity measurements and scour predictions than pre-
• Records and tabulates test data. as input and generate the depth of scour vs.
viously obtainable. Applications for its use include:
• Can store hundreds of tests at a time. time over the period covered by the chosen
scour at bridges, piping of dams, beach erosion
• Graphs flow rate vs. time as well as water tem- hydrograph.
and surface erosion problems. In the case of scour
at bridges, the EFA leads to improved accuracy on perature vs. time The Simple SRICOS Method.
scour depth predictions, offering several advan- • System can automatically fill the water tank 1) Calculate the maximum depth of scour.
tages over previous test methods. These advan- using water level sensors. 2) Collect soil samples at the site.
tages include: minimum sample disturbance; mea- • System can automatically cycle between water 3) Test samples in the EFA to obtain the erosion
surement of erosion rate vs. shear stress; measure- sump and water fill during tests to maintain rate vs. hydraulic shear stress applied.
ment of critical shear stress, and incorporation of lower water temps.
4) Calculate the equivalent time for a given
the test results from the SRICOS scour prediction • If hooked up the internet then the machine will design life of the bridge and for the design
method. The HM-5940 erosion function apparatus auto update with available firmware updates. velocity.
uses standard 3.0" OD x 2.875: ID (76.2 x 73 mm)
• Test data can be exported to USB stick for trans- 5) Using known equations, calculate the scour
Shelby tubes. The SRICOS method improves the
fer to a PC with “data download software” from depth at the end of the design life.
accuracy of pier scour predictions. The HM-4000
the Humboldt website. Erosion Function Apparatus HM-5940
EFA is designed to be used in conjunction with the
SRICOS method of scour prediction. The SRICOS • Motor can push the sample any specific distance Shipping wt. 1500 lbs (680kg)

scour prediction method and the HM-5940 ero- customizable by the user.
sion function apparatus were developed through The EFA uses either of two variants of the SRICOS
research carried out by Jean-Louis Briaud, PHD, method:
PE. and the scour research team at the Texas Trans- The Extended SRICOS Method
portation Institute of the Texas A&M University Sys- 1) Calculate the maximum depth of scour.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

Air Meters . . . . . . . . . . . . . . . . 146-149
CONCRETE
Initial Set. . . . . . . . . . . . . . . . . . .151
Air Indicators . . . . . . . . . . . . . . . . .150 Linear Traverse . . . . . . . . . . . . . . . .197
Beam Testing . . . . . . . . . . . . . . . . .158 Maturity . . . . . . . . . . . . . . . . . . .156
Compression Testing . . . . . . . . . . . . 169-180 Mixers . . . . . . . . . . . . . . . . . . .157
Consistency . . . . . . . . . . . . . . . . .155 Moisture (Slabs) . . . . . . . . . . . . . . 200-201
Corrosion . . . . . . . . . . . . . . . . 187-189 Mold Compaction . . . . . . . . . . . . . . .160
Crack Monitors . . . . . . . . . . . . . . 198-199 Pull-Off . . . . . . . . . . . . . . . . . 183-184
Cube Molds . . . . . . . . . . . . . . . . .160 Pulse Echo . . . . . . . . . . . . . . . . 192-193
Cylinder Capping . . . . . . . . . . . . . 167-169 Rebar Locators . . . . . . . . . . . . . . 185-186
Cylinder Molds . . . . . . . . . . . . . . . .159 Rebound Test Hammers . . . . . . . . . . . 181-182
Cylinder Mold Strippers . . . . . . . . . . . . .160 Resistivity . . . . . . . . . . . . . . . . 193-194
Cylinder Prep . . . . . . . . . . . . . . . 165-166 Self Consolidating Concrete . . . . . . . . . . .154
Cylinder Transport . . . . . . . . . . . . . . .161 Slump. . . . . . . . . . . . . . . . . . 152-153
Cylinder Storage. . . . . . . . . . . . . . 162-164 Strain . . . . . . . . . . . . . . . . . . . .197
Freeze-Thaw . . . . . . . . . . . . . . . 195-196 Strength. . . . . . . . . . . . . . . . . . .183
Ground Penetrating Radar . . . . . . . . . . . .185 Ultrasonic . . . . . . . . . . . . . . . . 189-192
Humidifiers & Humidity Storage . . . . . . . . 162-164 Unit Weight . . . . . . . . . . . . . . . . .150
146
Air Meters CONCRETE

H-2784.500

H-2783
H-2784

Humboldt Super Air Meter bubbles meets the recommendations of the ACI Humboldt Concrete Air Meter
ASTM C231, AASHTO T152 201 Concrete Durability Committee. ASTM C231, AASHTO T152
The H-2784 Super Air Meter (SAM) is a testing This new air meter has been investigated using The H-2783 air meter, which exceeds ASTM
device that measures both the air void spacing and more than 300 lab and field mixtures at Oklahoma requirements, features the Humboldt, all-brass
air volume of plastic (fresh) concrete in about 10 State University and the FHWA Turner Fairbanks super pump, the most reliable and highest quality
minutes. Air void spacing has been shown to be Laboratories. As part of an ongoing Pooled Fund pump available. The meter's easy-to-use, and extra
a better indicator of concrete freeze-thaw dura- Study, the SAM is being used by 10 different DOTs durable stainless steel clamping system employs
bility than total air content; however, until now, it on field concrete. The results of this testing are four, one-piece, self-locking clamps that quickly
has been challenging to measure in fresh concrete. also being compared to performance in an ASTM seal the lid to the base with proper tension aided
By being able to measure the actual air-void spac- C666 rapid freeze-thaw test*. An AASHTO Provi- by an o-ring to assure a watertight seal. The large,
ing in fresh concrete, the meter helps users better sional Standard for this test has been approved. easy-to-read, 4-inch diameter, heavy-duty, direct
understand the freeze-thaw durability of their con- The meter is currently being used in 22 different percentage gauge with calibration adjustments is
crete before it is placed. U.S. States and one Canadian Province. The SAM accurate to the nearest 0.1%. The bucket, or pres-
The meter can function in two ways. First, it pro- has been specified in Oklahoma and Michigan on sure chamber, features EZ-grip, cast handles, which
vides all the same information as a Type B meter, transportation projects. improve usability. This is especially true when the
under the same analytical conditions as a conven- The H-2784 includes one Super Air Meter testing bucket is also used as a 0.25 cu. ft. unit weight
tional pressure meter. After completing the con- device, and all accessories required to calibrate the measure. The lid of the pressure meter features
ventional testing the meter is then able to move meter and perform the type B or SAM tests. This a smooth sloped top so water and concrete wipe
into a second mode of operation that places the includes a calibrator; a mallet; safety glasses; strike- right off. By eliminating the cavities in the lid that
concrete under a series of higher pressures. By off board; a tamping rod; filling bulb and a durable, trap and hold concrete, maintenance and repair
understanding how the concrete responds to the protective case. problems are greatly reduced. The meter also fea-
series of high pressures, the meter can assess prop- Humboldt Super Air Meter H-2784 tures a machined base, which ensures the meter
erties of the air-void system beyond the air content. Ship wt. 4lbs. (15.9kg) sets level when conducting tests. The kit includes a
CAPE System for Super Air Meter durable plastic carrying case; a tamping rod; strike-
The H-2784 Super Air Meter is a modified version
ASTM C231, AASHTO T152 off bar; rubber bulb syringe; plastic calibration ves-
of a typical pressure meter (ASTM 231). The pri-
sel; inside calibration tube, outside calibration tube
mary modification is that two sequential pressur- The CAPE Tank Accessory simplifies pressurization
and operating instructions.
izations are applied to the concrete. The deforma- of the H-2784 Super Air Meter during testing, elim-
tion of the concrete is first investigated at 14.5, 30, inating the need to manually pump to the required Features include:
and 45 psi, the pressure is then released, and the pressures. The tank is fitted with three inflation Humboldt all-brass Super Pump
same pressure steps are used again to measure the chucks including regulators that are easily attached Large, heavy-duty, easy-to-read gauge
deformation. The differences between the first and to the pressurization valve of the Super Air Meter. Cast handles for secure grip
second pressure steps are used to calculate the Super Air Meter Cape System H-2784.500 Bucket can be used as a 0.25 cu. ft. unit weight
SAM number, which is correlated with the average Ship wt. 4lbs. (15.9kg)
measure
spacing between air voids in the concrete mixture.
If the spacing between the voids is too high, then Complete with all needed accessories and case
this could mean the concrete is susceptible to Humboldt Concrete Air Meter H-2783
Ship wt. 3lbs. (15.9kg)
freeze-thaw deterioration. A SAM number of 0.20
has been shown to correctly determine over 90%
of the time whether the spacing between the

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 147
CONCRETE Air Meters

H-2786P

H-2786C
H-2786 H-2786P

Concrete Air Meter Press-Ur-Meter Concrete Air Meter, Wood Case Press-Ur-Meter Concrete Air Meter, Plastic Case
ASTM C231, AASHTO T152 ASTM C231, AASHTO T152 ASTM C231, AASHTO T152
The H-2786C air meter features a simplified, This is the original Press-Ur-Meter for field and This is the original Press-Ur-Meter for field and
low-maintenance design, which uses no moving laboratory tests. This air meter is designed to pro- laboratory tests. This air meter is designed to pro-
parts inside the chamber. Pressure is released into vide air content and the determination of specific vide air content and the determination of specific
the base by an external, brass, quick-release T-valve. gravity and free moisture of aggregate. Designed gravity and free moisture of aggregate. Designed
The meter uses brass cover clamps, which can be to save time, reduce water use, ensure accuracy to save time, reduce water use, ensure accuracy
adjusted for clamping pressure. A large, easy-to- and maintain sample integrity (sample may also be and maintain sample integrity (sample may also be
read, 4" diameter, direct percentage gauge with used for slump and compression tests). The meter used for slump and compression tests). The meter
calibration adjustments is accurate to the nearest uses brass cover clamps, which can be adjusted uses brass cover clamps, which can be adjusted
0.1%. The base is machined inside and out for easy for clamping pressure. A large, easy-to-read, 4" for clamping pressure. A large, easy-to-read, 4"
cleaning and the chamber and cover are one solid diameter, direct percentage gauge with calibra- diameter, direct percentage gauge with calibra-
component, eliminating bottom gasket leaks. The tion adjustments is accurate to nearest 0.1%.The tion adjustments is accurate to nearest 0.1%.The
H-2786C air meter also features the Humboldt, all- H-2786 meter also features the Humboldt, all-brass H-2786 meter also features the Humboldt, all-brass
brass super pump, the most reliable and highest super pump, the most reliable and highest quality super pump, the most reliable and highest quality
quality pump available. The meter's base/bucket pump available. The meter's base/bucket can be pump available. The meter's base/bucket can be
can be used as a 0.25 cu. ft. unit weight measure. used as a 0.25 cu. ft. unit weight measure.This kit used as a 0.25 cu. ft. unit weight measure.This kit
The kit includes a durable plastic carrying case; includes a wood carrying case; tamping rod; strike- includes a molded-plastic carrying case; tamping
tamping rod; strike-off bar; wash bottle; plastic cal- off bar; rubber bulb syringe; aluminum calibration rod; strike-off bar; rubber bulb syringe; aluminum
ibration vessel; inside calibration tube, outside cali- vessel; inside calibration tube, outside calibration calibration vessel; inside calibration tube, outside
bration tube and operating instructions. tube and operating instructions. calibration tube and operating instructions.
Concrete Air Meter H-2786C Press-Ur-Meter with vertical wood case H-2786 Press-Ur-Meter with horizontal plastic case H-2786P
Ship wt. 34.9lbs. (15.9kg) Ship wt. 30lbs. (15.9kg) Ship wt. 30lbs. (15.9kg)

H-2755.2
H-2755

H-2756
Chace Concrete Air Indicator Kit Chace Concrete Air Indicator Chace Air Indicator Glass Filter Tube Only
AASHTO T199 AASHTO T199 AASHTO T199
(Isopropyl-Alcohol Method) Complete kit for For quick field checks for air content of fresh con- Chace Glass Filter Tube only H-2755.2
measuring air content of fresh concrete includes crete in about three minutes, pocket-sized unit air Glass tube provides marked lines on stem for esti-
H-2755 Chace air indicator, instructions, cleaning meter is furnished with instructions and correlation mating total air content. Does NOT include brass
brush and plastic squeeze-type bottle for alcohol chart. Glass tube provides marked lines on stem for cup and stopper.
in plastic storage box. Glass tube provides marked estimating total air content. Air Indicator includes Ship wt. 0.2lbs. (.45kg)
lines on stem for estimating total air content. Kit brass cup and stopper. Unit does not replace con-
does not replace conventional air meters. ventional air meters. Overall dimensions: 6.25 x
Chace Concrete Air Indicator Kit H-2756 1.125" dia. (159 x 29mm).
Ship wt. 1.4lbs. (1.8kg) Chace Concrete Air Indicator H-2755
Ship wt. 0.25lbs. (.45kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

148
Air Meters CONCRETE
H-2785.35 H-2783.31

H-2785.34 3 32
3.32
H-2783.32
H-2783.30
H-2793

H-2789 H-2785.32
H-2788
Air Meter Calibrators (5%)
Calibrators check the accuracy of any pressure-type
H-2785.33
concrete air meter. Set the specially-designed can-
ister upright at the bottom of the water-filled base, H-2785.36
and the meter should read 5% air by volume. Two H-2786C.32
2786C.32
calibrators are used for a 10% air reading.
Air Meter Calibrator, Brass H-2789
Air Meter Calibrator, Aluminum H-2793
Air Meter Calibrator, Plastic H-2788
H-3399 H-2783.26
Ship wt. 3 lb (1.3kg) H-2786C.33
H-2785.31
H-2783.26

H-2786C.40

H-2785.23
H-2785.24

H-2785.27
H-2783.28
H-2783.29 H-2785.7

H-2786C.26 H-2785.28
H-2785.4
H-2785.1 H-2785.25
H-2783.27 H-2783.6
H-2783.24
H-2783.26
H-2783.6A H-2785.7
H-2785.20 H-2785.12 H-2786C.22
H-2783.5 H-2783.24
H-2783.3
H-2785.13 H-2786C.11SA
H-2785.14 H-2783.2 H-2785.3
H-2785.15
H-2783.19 H-2786CL
H-2783.17 H-2785.20

H-2786C.6
H-2783.21
H-2786C.6A
H-2785.4 H-2786C.5
H-2783.12
H-2785.DB
H-2786C.2
H-2783.25 H-2785.DB
H-2785.53

H-2785.18 H-2786C.29
H-2785.41
H-2786C.10
H-2786C.3
H-2786C.9A

H-2783 Air Meter Replacement Items H-2786C Air Meter Replacement Items
Part No. Description Part No. Description Part No. Description Part No. Description
H-2785.1 Pressure chamber H-2785.18 Needle valve seat assembly H-2785.7 Gauge, complete H-2785.27 Clamp toggle lock nut
H-2783.2 Pressure chamber cap H-2783.19 Cover H-2785.3 Pressure chamber elbow H-2785.25 Spring
H-2783.3 Pressure chamber elbow H-2785.20 Cover o-ring H-2786C.3 Gasket, pressure chamber H-2786C.26 Toggle
H-2785.4 Pressure chamber gasket H-2783.21 Needle valve spring retainer H-2786C.2 Pressure chamber cap H-2786C.22 Clamp
H-2783.5 Air-release stem H-2783.24 Cover petcock H-2786C.5 Air-release stem H-2786C.10 Super Pump adapter
H-2783.6 Air-release cap H-2783.25 Base H-2786C.29 Pot (base only) H-2786C.9A O-ring, lower for adapter
H-2783.6A Release cap gasket H-2785.41 Needle valve seat gasket H-2786C.6 Release cap and gasket H-2785.53 O-ring for tube
H-2785.7 Air meter gauge H-2783.26 Latch assembly H-2786C.6A Release cap gasket only H-2786C.29 Pot, base only
H-2783.12 Needle valve stem H-2783.27 Latch
H-2786C.11SA Valve assembly, complete H-2786CL Lid only
H-2785.12 Needle valve nut H-2783.28 Adjusting rod
H-2785.20 Cover o-ring H-2785.DB Super Pump
H-2785.13 Needle valve lever H-2783.29 Latch assembly screw
H-2785.24 Clamp trunion H-2786C.55 Gasket replacement kit
H-2785.14 Needle valve spacer H-2785.DB Super Pump assembly
H-2785.15 Needle valve o-ring H-2783.39 Gasket replacement kit H-2785.23 Nut, clamp H-2786C.40 Latch assembly complete
H-2783.17 Needle valve spring

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 149
CONCRETE Air Meter Replacement Parts
Air Meter Replacement Accessories
Item
Calibration Vessel, plastic
Part No.
H-2783.30
CLEAN,REPAIR
Calibration Vessel, metal H-2785.31 CALIBRATE
Calibration Tube (outside) H-2783.31
Calibration Tube (inside) H-2783.32
Calibration Tube (outside) H-2785.32
H-2783.62H
Calibration Tube (inside) H-2785.33
Calibration Tube (outside) H-2786C.32
Calibration Tube (inside) H-2786C.33
Wash Bottle H-3399
Strike-off Bar H-2785.34
Tamping Rod 5/8" x 16" H-2785.35
Syringe, Rubber Bulb H-2785.36
H-2785.38HP Latch Assembly H-2783.26
Plastic Case, Horizontal H-2783.62H
H-2785.38 Wooden Case, Press-Ur-Meter H-2785.38
Plastic Case, Press-Ur-Meter,
H-2785.38HP
Horizontal
H-2785.40

H-2785.24
H-2785.23
Call: 1.800.544.7220
H-2785.27

H-2785.28
H-2785.4 H-2785.26
H-2785.25
H-2785.1
H-2785.42 H-2785.7 H-2785.12
H-2785.24 H-2785.13
H-2785.20 H-2785.22 H-2785.14
H-2785.15
H-2785.DB
H-2785.16
H-2785.6
H-2785.19 H-2785.12 Super Pump for Air Meters
H-2785.6A
H-2785.5
Step up to the quality and reliability of the Hum-
H-2785.3 H-2785.11
H-2785.29 boldt super pump. The super pump’s all brass con-
H-2785.2
struction resists acids in cement. All parts, including
valve, are replaceable. For use with all type B air
H-2785.41 meters.
H-2785.18
Super Pump for Air Meters H-2785.DB
H-2785.DB
Ship wt. 0.5lbs. (.45kg)
H-2785.4
H-2785.DB10
H-2786 Air Meter Replacement Items
H-2785DB Super Pump H-2785.DB12
Part No. Description Part No. Description Replacement Parts
H-2785.1 Pressure chamber H-2785.19 Cover Part No. Description H-2785.DB5
H-2785.2 Pressure chamber cap H-2785.20 Cover O-ring
H-2785.3 Pressure chamber elbow H-2783.24 Cover Petcock H-2785.DB1 Valve nut H-2785.53
H-2785.4 Pressure chamber gasket H-2785.22 Clamp with stud H-2785.DB2 Valve
H-2785.DB9
H-2785.5 Air-release stem H-2785.23 Clamp nut H-2785.DB3 Valve O-ring
H-2785.DB4A Pump tube H-2785.51
H-2785.6 Air-release cap H-2785.24 Clamp trunnion
H-2785.6A Release cap gasket H-2785.25 Clamp spring H-2785.DB5 Pump cap H-2785.DB7
H-2785.7 Air meter gauge H-2785.26 Clamp toggle H-2785.DB6 Stem nut
H-2785.DB7 Pump piston H-2785.DB6
H-2785.11 Needle valve stem H-2785.27 Clamp toggle set screw
H-2785.12 Needle valve nut H-2785.28 Clamp toggle lock nut H-2785.DB9 Pump stem
H-2785.13 Needle valve lever H-2785.29 Base H-2785.DB10 Pump handle
H-2785.14 Needle valve spacer H-2785.41 Needle valve seat gasket H-2785.DB12 Stem cap H-2785.DB4A
H-2785.15 Needle valve o-ring H-2785.42 Stud H-2785.51 Pump piston O-ring
H-2785.53 Pump tube O-ring H-2785.DB3
H-2785.16 Needle valve spring H-2785.DB Super Pump assembly
H-2785.DB2
H-2785.12 Needle valve spring retainer H-2785.55 Gasket replacement kit
H-2785.18 Needle valve seat assy. H-2785.40 Latch assembly complete H-2785.DB1

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

150
Air Indicators, Unit Weight CONCRETE

H-2796A

ASTM Unit
Weight Measures

H-2795P

Non-ASTM Unit
Weight Measures
H-3650

Roll-A-Meter Air Indicator ASTM Unit Weight Measures

ASTM C173, AASHTO T196 ASTM C29, C138, C192, AASHTO T19, T121, T158
This lightweight aluminum Roll-A-Meter is used to determine the air content of Machined aluminum, cylindrical unit weight measures with
concrete mixes, and is recommended for concrete containing lightweight aggre- handles for determining unit weight of fine, coarse or mixed
gate, air-cooled slag or highly porous aggregate. The meter's fast acting one-piece, aggregates. Water-tight with true and even top and bottom.
self-locking stainless steel clamps assure a watertight seal between the top section Measures retain form after repeated use.
and bowl. A see-through window in the neck has easy to read engraved scale grad- ASTM Unit Weight Measures see chart
uated from 0 to 9% with .25% sub-graduations. A durable plastic carrying case with Ship wt. see chart
a tough die cut closed cell hard foam insert protects the meter and its accessories. ASTM Unit Weight Measures
Kit includes: Meter, carrying case, tamping rod, baffle funnel, strike-off bar, calibra-
Capacity Inside Dia. Inside Ht. Ship Wt.
tion measuring vessel, syringe, 16 oz. measuring cup, spanner wrench and manual. Model
cu. ft. (liter) in. (mm) in. (mm) lbs. (kg)
Roll-A-Meter Air Indicator H-2796A
Ship wt. 29.8lbs. (11.4kg) 1/10 (2.8) 6 (152) 6.1 (155) 6.5 (2.7) H-3660.1
Volumetair Air Meter 1/4 (7.1) 8 (203) 8.8 (224) 9.4 (4.9) H-3664.1
ASTM C173, AASHTO T196 1/3 (9.3) 8 (203) 11.5 (292) 17 (7.7) H-3663.1
The volumetair is used for the rolling method of measuring entrained air in any 1/2 (14.1) 10 (254) 11 (279) 20 (7.2) H-3661.1
concrete. This ultra lightweight and easy-to-use instrument is supplied complete
1 (28.3) 14 (356) 11.2 (155) 22 (13.6) H-3662.1
with the meter, funnel, syringe, tamper, calibration cup, mallet, strike-off bar and
plastic carrying case. The plastic materials used in the construction of this unit not
Non-ASTM Unit Weight Measures
only make it lightweight; but also allow the user to use water for clean-up and small
Heavy-gauge, seam-welded, water-tight, steel unit weight
amounts of muriatic acid for periodic cleaning. The sight tube has a range of 0 to 9%
measures with bail handles. Can be used for concrete or
and the base volume is 134 cu. in. (2200ml).
aggregate. Do not meet ASTM specifications.
Volumetair Air Meter H-2795P
Ship wt. 19lbs. (6.8kg)
Non-ASTM Unit Weight Measures see chart
Ship wt. see chart
Tamping (Puddling) Rod
Round, straight steel rod for use with concrete cylinder molds, slump cones and
Capacity Inside Dia. Inside Ht. Ship Wt.
unit weight measures. Rod measures .625" (16mm) dia. x 24" (610mm) long. Model
cu. ft. (liter) in. (mm) in. (mm) lbs. (kg)
Both ends are rounded to hemispherical tip. Plated for rust resistance.
Tamping (Puddling) Rod H-3650 1/10 (2.8) 6 (152) 6.1 (155) 6.5 (3.2) H-3660
Ship wt. 3lbs. (0.9kg) 1/4 (7.1) 8 (203) 8.8 (224) 15 (6.8) H-3664
Strike-Off Plates 1/3 (9.3) 8 (203) 11.5 (292) 15.8 (8.7) H-3663
ASTM C29, C138, C192, AASHTO T19, Size Ship 1/2 (14.1) 10 (254) 11 (279) 20 (10) H-3661
T121, T158 sq. in. Model Wt.
(mm sq.) lbs. (kg) 1 (28.3) 14 (356) 11.2 (155) 33 (15) H-3662
Clear .625" (15.8mm) thick, acrylic plates
used to strike off surface of unit weight 8 (203) H-3669.1P 2.3 (0.9)
measure samples. Use a plate that is 2" 10 (254) H-3669.4P 4 (1.0)
(50.8mm) larger than the diameter of the See Pages 311 to 312
12 (305) H-3669.2P 5.1 (2.3)
unit weight measure. for Portable Scales for
16 (406) H-3669.3P 8 (3.6) use in Unit Weight measure
Strike-Off Plates see chart
Ship wt. see chart
NOTE: Use 2" larger plate than the
diameter of the unit weight measure.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 151
CONCRETE Initial Set

H-4134F

H-4134
H-4133

H-4133N

H-4132 HC-4972

Concrete Pocket Penetrometer Cementometer Moisture Meter Data Sheets, Time of Set
ASTM C403, C780 The cementometer type-R handles normal water/ ASTM C403, AASHTO T197
Lightweight, spring-reaction type concrete pene- cement ratios between 0.35 to 0.65. The unit is Time of setting data sheets for use with the
trometer for field and lab evaluation of the initial calibrated for standard type I, II, and III cements H-4133 and H-4137. Package of 100 sheets.
set of concrete mortar, based on ASTM C403. Pen- and can also be programmed with up to ten
Data Sheets, Time of Set H-4133F
etration plunger has a 1/20 sq. in. tip area. Plunger different mix designs by the user. For highest Ship wt. 3.3lbs. (1.45kg)
is steadily pushed into the mortar to a 1 in. depth, accuracy, the user should program the unit for
Resistance Needle Set
as indicated on the shaft, at periodic time inter- the material being used. The simple-to-use cal-
ASTM C403, AASHTO T197
vals. The penetrometer’s calibrated range is 0-700 ibration process rapidly creates user programs
Set of six, stainless steel needles and holding
psi. Resistance in psi is indicated on the scale. The without the need for external computing devices.
block for use with the H-4133 acme penetrome-
term “initial set” is the semi-hardened, partially The unit can store over 150 readings complete
ter mortar penetration resistance apparatus. Set
hydrated condition of the concrete beyond which with time and date for future reference. Data can
includes all needles in chart below. Needles are
it can no longer be worked. The point of initial set be recalled via USB interface.
also available individually.
is reached when the penetration value is 500psi. Cementometer Moisture Meter HC-4972
Concrete Pocket Penetrometer H-4134 Ship wt. 7lbs. (3.1kg) Description Part No.
Ship wt. 0.9lbs. (.45kg) Acme Penetrometer 1 sq. in. (645mm ) 2
H-4133.15
Concrete Pocket Penetrometer, w/Dial ASTM C403, AASHTO T197 1/2 sq. in. (323mm2) H-4133.16
ASTM C403, C780 Hydraulic reaction-type apparatus for determin- 2
1/4 sq. in. (161mm ) H-4133.17
Lightweight, spring-reaction type concrete pene- ing the setting time of concrete with slump greater
1/10 sq. in. (65mm2) H-4133.18
trometer for field and lab evaluation of the initial than zero by testing mortar sieved from the con-
set of concrete mortar, based on ASTM C403. Pen- crete mixture. It also determines the effects of 1/20 sq. in. (32mm2) H-4133.19
etration plunger has a 1/20 sq. in. tip area. Plunger variables, such as temperature, cement mixture 1/40 sq. in. (16mm ) 2
H-4133.20
is steadily pushed into the mortar to a 1" depth, as proportions, additions and admixtures upon the
Resistance Needle Set H-4133N
indicated on the shaft, at periodic time intervals. time of setting and hardening of concrete. The Ship wt. 1.2lbs. (0.5kg)
Penetrometer’s calibrated range is 0-700 psi. Resis- penetrometer’s design makes it easy to operate,
tance in psi is indicated on the scale. The term “ini- being more efficient, with a longer gear rack. All
tial set” is the semi-hardened, partially-hydrated needles are one length so settings may remain the
condition of the concrete beyond which it can no same. Loads are applied hydraulically with pres-
longer be worked. The point of initial set is reached sures read on a 200 lbf (890N) capacity gauge
when the penetration value is 500psi. graduated in 2 lbf divisions. Set of six needles
Concrete Pocket Penetrometer w/Dial H-4132 allows multiplication to a maximum reading of
Ship wt. 0.9lbs. (.45kg) 8000 lbf. The acme penetrometer features cast
Penetrometer Foot aluminum base and set of stainless steel penetra-
ASTM C403, C780 tion needles in a wooden block (bearing area: 1,
1/2, 1/4, 1/10, 1/20 and 1/40 sq. in., (645, 323,
For use with masonry mortars to determine board
161, 65, 32 and 16mm2). Includes 100 laboratory
life and initial consistency. Method can be used
test data reporting forms.
as a basis for acceptance of mortars. Stainless
steel disk, 2.70" (68.58mm) dia. Can be used with Acme Penetrometer H-4133
H-4134 or H-4132 Penetrometers. Ship wt. 40lbs. (18kg)

Penetrometer Foot H-4134F

Ship wt. 2.2lbs. (.99kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

152
Slump CONCRETE

H-3645
H-3637 and H-3635 H-3655
Slump Cone Sets
feature Easy-Carry
Configuration

H-3656

H-3643
H-3635 H-3637

Deluxe Slump Cone Set Slump Test Set w/ Pan Ball Penetration Apparatus (Kelly Ball)
ASTM C143, C143M, AASHTO T119, BS1881 ASTM C143, C143M, AASHTO T119, BS1881 ASTM C360, AASHTO T183, CTM533
The Humboldt, deluxe slump cone set provides This slump cone test set is designed for those who Used to test the consistency of concrete using the
you with the basic slump test components in an prefer a traditional pan setup. This set includes penetration of a half sphere into plastic concrete.
easy-carry configuration, plus a scoop and fun- our H-3640 slump cone (standard steel), the A 1" (2.5-centimeter) penetration by the kelly ball
nel to aid in filling the slump cone. The set also H-3800 wire-bristle, wooden-handled brush, a corresponds to about 2" (5 cm) of slump. The
includes a specially-designed "crete-brush" with H-3650 tamping (puddling) rod, the H-3725 gal- apparatus consists of 30 lb. (14kg) cylinder with
a 20" handle, which stands up to the harsh acids vanized-steel, 24" x 24" x 3" slump pan, and a hemispherically shaped bottom and handle. Stir-
used to clean slump test equipment. The deluxe H-3760 Trowel. rup or frame guides handle act as reference for
set includes: H-3636 base plate, H-3638 funnel, Slump Test Set w/ Pan H-3645 measuring the depth of penetration. The stirrup
H-3639.20 brush, H-3640 slump cone (standard Ship wt. 24lbs. (10.9kg) handle is graduated in 0.25" (6.4mm) increments
steel), H-3651 tamping rod w/ 6" scale on handle, K Slump Tester on one side and half-centimeter increments on the
and a H-3731 scoop. and H-4901 tape measure. ASTM C1362 other side for measuring the depth of penetration.
Standard Slump Cone Set H-3635 The K-slump tester provides a fast approximate Concrete may be tested as it is placed into forms
Ship wt. 25lbs. (11.4kg) prior to any manipulation or in a suitable container.
determination of slump and workability of wet con-
Standard Slump Cone Set crete. Can be used to measure slump in buckets, Ball Penetration Apparatus, 30 lb H-3655
ASTM C143, C143M, AASHTO T119, BS1881 wheelbarrows, ready-mix truck chutes, as well as Ball Penetration Apparatus, 20 lb. H-3655-20
Ship wt. 33.7lbs. (15kg)
The Humboldt, standard slump cone set pro- in-place forms and test molds. The tester is capa-
vides you with the basic slump test components ble of indicating a fairly accurate correlation to an Ball Drop Apparatus (Kelly Ball)
in an easy-carry configuration. The unique base actual slump test. The probe can also be used to ASTM D6024
design allows you to combine the individual com- determine the workability and the degree of com- Used to test the suitability of load applications on
ponents together into a one-piece, portable unit paction of fresh concrete. Includes correlation controlled low-strength material (CLSM). Used as a
(see photo). The standard set includes our H-3636 chart and instructions. field test to determine the readiness of the CLSM
cast aluminum base plate, H-3640 slump cone K Slump Tester H-3643 to accept loads prior to adding a wearing surface.
(standard steel), H-3651 tamping rod w/ 6" scale Ship wt. 1.1lbs. (0.5kg) Ball and handle weigh 30-33 lbs (14-15kg).
on handle and H-4901 tape measure. The base
Ball Penetration Apparatus, D6024 H-3655.D6024
includes bolt-on clamps, which hold the slump Ship wt. 34.5lbs. (18kg)
cone securely during filling and rodding. The inte-
Carrier for Ball Penetration Apparatus
gral handle, attached to the base, can be rotated
Heavy-duty, cast-aluminum design with quick
above the specimen once the cone has been
release latches. Provides convenience for the oper-
removed and used as a guide to measure the
ator and protection to Kelly ball when transporting
slump.
to and from the job site.
Standard Slump Cone Set H-3637 Carrier for Ball Penetration Apparatus H-3656
Ship wt. 20lbs. (9.5kg)
Ship wt. 18lbs. (8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 153
CONCRETE Slump

H-4901

H-3639.8
H-3640
H-3640M H-3636

H-3640P H-3725

H-3800

H-3731
H-3638 H-3760
H-3639.20

Slump Accessories and Replacement Parts Tamping (Puddling) Rod— H-3650 Crete Brush, 8" Handle
ASTM C138, ASTM C138M, ASTM C143, ASTM Acid-proof crete brush with 8" handle.
Slump Cone, Steel
C143M, ASTM C173, ASTM C173M, ASTM C31, Crete Brush, 8" Handle H-3639.8
ASTM C143, C143M, AASHTO T119
ASTM C31M, AASHTO M 205, AASHTO T 119, Ship wt. 0.75lbs. (0.9kg)
Steel slump cone has plated finish to resist rust. Fit- AASHTO T 152, BS 1881 Crete Brush, 20" Handle
ted with handles and foot lugs for use with H-3636
Round, straight steel rod for use with concrete Acid-proof crete brush with 20" handle.
base plate. 8" (203mm) dia. at base, 4" (102mm)
cylinder molds, slump cones and unit weight Crete Brush, 20" Handle H-3639.20
dia. at top and 12" (305mm) high.
measures. Rod measures .625" (16mm) dia. x 24" Ship wt. 1lbs. (0.9kg)
Slump Cone, Steel H-3640 (610mm) long. Both ends rounded to hemispheri-
Ship wt. 7lbs. (2.7kg) Scoop, One-piece Aluminum
cal tip. Plated for rust resistance. No scale. Round nose #2 scoop. Bowl dimensions: 8.25"
Slump Cone, Metric Steel
Tamping (Puddling) Rod H-3650 (210mm) length x 5.25" (133mm) width x 3"
ASTM C143, C143M, AASHTO T119 Ship wt. 3lbs. (0.9kg) (76mm) depth.
Steel slump cone has plated finish to resist rust. Fit- Base Plate, Aluminum Scoop, One-piece Aluminum H-3731
ted with handles and foot lugs for use with H-3636 ASTM C143, C143M, AASHTO T119, BS 1881 Ship wt. 1.5lbs. (0.9kg)
base plate. Dimensions are: (200mm) dia. at base,
Cast-aluminum base plate firmly holds all slump Funnel, Aluminum
(100mm) dia. at top and (300mm) high.
cone models, permitting one person to conve- Aluminum funnel for use with all slump cones to
Slump Cone, Metric Steel H-3640M niently perform test. Base clamps turn down over assist in filling.
Ship wt. 7lbs. (2.7kg)
cone foot lugs to secure entire assembly. Mov- Funnel, Aluminum H-3638
Slump Cone, Plastic able handle raises vertically over specimen (after Ship wt. 0.8lbs. (0.9kg)
ASTM C143, C143M, AASHTO T119 removal of cone) and slump is easily measured with Trowel, Forged Steel
Lightweight, plastic slump cone will not dent or the 6" scale cut into handle end of H-3651 tamp- Forged steel trowel with flat, pointed blade, fea-
rust and can be cleaned with an acid bath. Formed ing rod. tures rubber/plastic comfort handle, 2.75'' X 5'' (70
with handles and foot lugs for use with H-3636 Base Plate, Aluminum H-3636 x 127mm).
base plate. 8" (203mm) dia. at base, 4" (102mm) Ship wt. 8lbs. (3.6kg)
Trowel, Forged Steel H-3760
dia. at top and 12" (305mm) high. Slump Pan, Galvanized Ship wt. 0.4lbs. (0.9kg)
Slump Cone, Plastic H-3640P ASTM C143, C143M, AASHTO T119, BS 1881 Tape Measure
Ship wt. 2.3lbs. (1.4kg)
Durable, steel pan with tapered sides for easy 16 ft (5m) tape measure with rubber grip cover and
Graduated Tamping Rod cleaning and nesting. Dimensions: 24" x 24" x 3" wrist strap.
ASTM C143, C143M, AASHTO T119, BS 1881 (610 x 610 x 76mm) Tape Measure H-4901
Steel Tamping Rod with 6" scale in 0.25" incre- Slump Pan, Galvanized H-3725 Ship wt. 0.8lbs. (0.45kg)
ments engraved on handle for measuring amount Ship wt. 9.9lbs. (8.2kg)
of slump. When used with H-3636 base plate, raise Brush, Wooden Handle
handle over specimen and measure distance from Brass wire with wood handle brush. Dimensions: 2"
handle to specimen. x .875" x 5.25" (25 x 22 x 133mm), 10.25" (360mm)
Graduated Tamping Rod H-3651 overall length.
Ship wt. 4lbs. (1.8kg)
Brush, Wooden Handle H-3800
Ship wt. 0.5lbs. (0.9kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

154
Self-Consolidating Concrete CONCRETE

H-3658

H-3652

HC-3666
HC-3665

HC-3668

J-Ring Test Set Penetration Apparatus V-Funnel Flowability Test

ASTM C1621, C1621M, C1611 ASTM C1712 EN 12350
The J-ring test can be used to determine the The penetration apparatus provides a rapid assess- Designed to evaluate the segregation resistance
passing ability of self-consolidating concrete. It is ment of static segregation resistance of self-con- of self-consolidating concrete through the flowing
applicable for laboratory use in testing different solidating concrete. While it does not actually speed from a funnel. Applicable to concrete with
concrete mixtures for passing ability or can be used measure static segregation, it does provide a quick aggregates of 1" (25mm) maximum size. Stain-
in the field as a quality control test. It is typical to assessment of whether static segregation is likely to less steel construction with 10L capacity. Upper
also perform a slump flow test with the J-ring test. occur. The included scale is marked in 1mm incre- edge is smooth and reinforced and the outflow
This test is similar to the J-ring except the J-ring ments and is replaceable. Test apparatus is used in orifice is equipped with a sealable valve. Includes
is not used. The difference between the results of conjunction with an inverted standard slump cone, polyethylene box to collect discharge and a 36"
the two tests provides an indicator of the passing order H-3640 for this purpose. You may also need (914mm) long straight edge to level concrete
ability of the concrete. a strike-off bar, order H-2785.34. prior to testing.
Designed for durability, Humboldt's J-ring set Penetration Apparatus HC-3668 V-Funnel Flowability Test HC-3665
includes a slump cone, J-ring with smooth or rebar Ship wt. 3lbs. (1.9kg) Ship wt. 53lbs. (24kg)

rods and steel base plate with engraved position- L-Box Flowability Test Static Segregation Column
ing rings. EN 12350, ASTM pending ASTM C1610
J-Ring Test Set, Smooth Rods H-3652 Method used to determine flow rates and pass- Used to determine the potential for static segre-
J-Ring Test Set, Rebar Rods H-3652R ability of Self-consolidating concrete in confined gation of self-consolidating concrete by measur-
Ship wt. 85lbs. (38.5kg) spaces, as well as an evaluation of filling, passing ing the coarse aggregate content in the top and
ability and segregation resistance. Applicable to bottom portions of a cylindrical specimen. This test
Individual J-Ring Components
concrete with aggregates of 1" (25mm) maximum can be used as a quality control determination for
Description Part No. size. Test box is comprised of concrete reservoir, levels of coarse aggregate segregation, especially
J-Ring with Smooth Rods H-3654 a slide gate, an obstacle grid comprised of 3 bars for deep section applications like walls or columns.
J-Ring with Rebar Rods H-3654R and a test basin. Includes metal strike-off bar and This test is not applicable for self-consolidating
instructions. concrete with lightweight aggregate. The column
Base Plate, Engraved, Stainless H-3653
L-Box Flowability Test H-3658 includes a stable base, three column sections and
Slump Cone H-3640 Ship wt. 27lbs. (12kg) two sliding separator blades, which allow the col-
umn to be disassembled while capturing the con-
crete sample in the column sections.
Static Segregation Column HC-3666
Ship wt. 24lbs. (11kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 155
CONCRETE Consistency

H-3648 H-3649
H-36
H-3647

H-3041
H-2950.RCA

H-4137

Vebe Consistometer Cylinder Mold Vibrating Table Apparatus Mortar Penetration Resistance Apparatus
EN 12350-3; BS1881:104; UNI 9419 ASTM C1176, C470 Method B ASTM C403, AASHTO T197
The Vebe Consistometer method is based on the Used for making roller-compacted concrete in cyl- Spring-reaction-type apparatus, graduated from
same principle of the simple slump cone test, for inder molds using a vibrating table. This practice 10 to 130 lbf (45 to 580N) in increments of 2 lbf
the determination of the workability of concrete, is used when the standard procedures of rodding (9N) for testing rate of hardness of mortars sieved
but it has the advantage of a mechanized action. and internal vibration are not practicable. The from concrete mixtures. Determines effects of vari-
After removing the slump cone, the concrete unit is comprised of a vibrating table, which can ables such as temperature, cement, mixture pro-
undergoes a vibration to determine slump. be bolted to a floor or substantial base slab. A portions, additions and admixtures upon the time
Vebe Consistometer, 120V 60 Hz H-3647 swing arm with guide sleeve for the 20 lb (9kg) of setting and hardening of concrete. Penetration
Vebe Consistometer, 220V 60 Hz H-3647.2F surcharge weight is attached to the base, which resistance is measured by the downward vertical
Vebe Consistometer, 220V 50Hz H-3647.5F allows the weight to swing out of the way when force exerted to penetrate the mortar 1" (25mm).
Ship wt. 198lbs. (90kg) filling the mold, but allows easy application of the Pressure reading is measured by a scale with a slid-
Consistency Vibrating Table Test weight to the top of the specimen in the mold ing ring indicator on the handle’s stem. Includes
ASTM C1170 prior to vibration. The test mold is a 6" x 12"mold these interchangeable mortar penetration
conforming to ASTM C470 and is locked into resistance needles: 1, 1/2, 1/4, 1/10, 1/20 and
Used for determining the consistency of stiff to
place on the base of the unit. 1/40 sq. in (645, 323, 161, 65, 32, 16mm2).
extremely dry concrete mixtures like those used
in roller-compacted concrete mixtures. Density of Vibrating Table, 120V 60 Hz H-3649 Mortar Penetration Resistance Apparatus H-4137
Ship wt. 16lbs. (9kg)
the specimens is determined by determining the Vibrating Table, 220V 60 Hz H-3649.2F
mass of the consolidated specimen and dividing Vibrating Table, 220V 50Hz H-3649.5F Resistance Needle Set
Ship wt. 305lbs. (138kg)
by its volume. The unit is comprised of a vibrating ASTM C403, AASHTO T197
table, which can be bolted to a floor or substantial Mold Sleeve for Vibrating Table Apparatus Set of six, screw-on type, replacement needles for
base slab. A swing arm with a guide sleeve for the ASTM C1176, C470 Method B use with the H-4137 mortar penetration resistance
50 lb (22.7kg) surcharge weight is attached to the Test mold sleeve assembly for use with the H-3649 apparatus. Set includes all needles in chart below.
base, which allows the weight to swing out of the cylinder mold vibrating table apparatus for ASTM Needles are also available individually.
way when filling the mold, but allows easy appli- C1176 method B. Test uses standard H-3041 6" x Resistance Needle Set H-4143
cation of the weight to the top of the specimen in 12" plastic cylinder molds. The cylinder molds are Ship wt. 0.5lb (1.0kg)
the mold prior to vibration. The test mold is 9.5" locked into place on the vibrating table using this
x 7.75"ID with handles for easy movement and is metal sleeve. Metal sleeve is 11.4" tall.
locked into place on the base with positioning tabs Mold Sleeve, Vibrating Table App. H-2950.RCA Description Part No.
and wing nuts. Ship wt. 1.15lbs. (9.1kg)
1 sq. in. (645mm )2
H-4143.1
Consistency Vibrating Table, 120V 60 Hz H-3648 Cylinder Molds for Vibrating Table Apparatus 1/2 sq. in. (323mm2) H-4143.50
Consistency Vibrating Table, 220V 60 Hz H-3648.2F ASTM C1176, C470 Method B
1/4 sq. in. (161mm2) H-4143.25
Consistency Vibrating Table, 220V 50Hz H-3648.5F Standard, disposable, plastic cylinder molds with
Ship wt. 360lbs. (150kg) 1/10 sq. in. (65mm2) H-4143.10
flat bottoms. For use with H-3649 Vibrating table
and H-2950.RCA Mold Sleeves. Easily stripped 1/20 sq. in. (32mm2) H-4143.05
2
with stripper tools, sold separately. Oversize 1/40 sq. in. (16mm ) H-4143.025
charges apply to cartons of 36.
Plastic Cylinder Molds, 36 per carton H-3041
Ship wt. 26lbs. (11.8kg)

Plastic Cylinder Molds, 20 per carton H-3041.20

Ship wt. 15lbs. (6.8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

156
Maturity CONCRETE

HG-4040

H-2682

Installation Example of HG-4040

Multi-Channel, Maturity Meter Maturity Meter Components • Monitoring temperature gradients in mass
ASTM C1074 Description Part No. concrete
Humboldt Maturity Meters provide a predictable Features (Hardware)
Thermocouple Wire:
strength determination of cast-in-place concrete H-2670.1 • Wireless technology
based on ASTM standard C1074-98 (Estimating 24 GA, (per foot)
• Rugged and waterproof design
concrete strength by the maturity meter method). 20 GA, Type T (per ft.) H-2670.1T
• Easy installation and activation by tying the
These units utilize inexpensive, disposable, T-type 24 GA, Type T, 50 ft. H-2670.1.50 wires together
thermocouple wire with quick-connect jacks, which 24 GA, Type T, 100 ft. H-2670.1.100 • Extended temperature sensor cable for mass
can be embedded directly into a concrete struc-
Plug for thermocouple H-2680P concrete
ture to measure temperature at timed intervals.
These readings can then be used to document the Printer H-2684 • Long battery life (up to 3-4 months after
maturity process within the structure in order to: AC Adapter/Charger H-2682CH installation)
• predict the time for form and shoring removal; Serial Cable H-2686 • Patents pending
• estimate loading and post-tensioning time; Features (Software)
• control winter heating/insulation, and SmartRock2™, Wireless Maturity Sensor • Real-time data display (e.g. temperature,
• reduce construction time and costs ASTM C1074 strength, max-min)
The H-2680 and H-2682 have four channels, and SmartRock2 is a rugged, mobile app-based wire- • Maturity calibration database
provide the maturity number calculation, instant less sensor for monitoring the temperature of con-
• Free Android and iOS apps for smartphone
readout and temperature history on a menu- crete from fresh to hardened stage. It also estimates
and tablet
driven alphanumeric display. A communications concrete strength, based on the maturity concept.
The SmartRock2 can be placed in the concrete • Easy data sharing between devices
port allows information to be transferred from the
formwork, no more than 3" deep (installed on the • Project management tools
meter to another meter, printer or computer. The
H-2682 provides the use of a rechargeable nick- rebar) before pouring, to monitor the temperature • PDF report generation
el-cadmium battery, which can be used to enhance of concrete in situ. The continuous measurements • Photos and blueprints attachment
performance in cold weather applications. are recorded on the SmartRock2 memory and can
• Goal limit setting for temperature and strength
be downloaded at any time during the concrete
Both units give maturity number calculation, instant
setting and hardening onsite using the mobile Specifications
readout and temperature history. All four channels
application on a smartphone or tablet device. Reading Range -22 to +176°F (-30 to 80°C)
may be used simultaneously. All information is
The continuous monitoring of concrete tempera- Accuracy ± 1°C
available on menu-driven alphanumeric display.
ture can be used as a QC/QA method as well as Measurement Once every 30mins for 1
Datum temperature is programmable from -20° to
maturity-based strength estimation of concrete. The Frequency month
+60°C. Communications port allows information
field monitoring of concrete temperature can also Wireless Signal Up to 20-26 feet (6-8 meters)
transfer from meter to meter, printer or computer. Range
H-2680 includes: four, type “T” thermocouple help with optimizing the formwork removal time,
1.5" x 1.5" x 0.5"
wire and GFE connectors, RS-232 communica- application of load on the structure, and adjusting Dimensions (38 x 38 x 12mm)
tions cable, 9V battery and plastic carrying case. the curing temperature of concrete onsite.
H-2682 includes: four, type “T” thermocouple SmartRock2 can be used to monitor the tempera- Temperature 16" (40cm)
ture of fresh and hardened concrete. This informa- Cable Length 10 ft (3m)
wire and GFE connectors, RS-232 communica-
tion can be used for: Up to 4 months after
tions cable, rechargeable nickel-cadmium battery Battery Life
installation
with120V battery charger/ AC adapter and plastic • Optimization of curing conditions
carrying case. • Quality control in the field SmartRock2 Maturity Sensor, 16" (40cm) HG-4040
Maturity Meter H-2680 • Estimation of strength (ASTM C1074) SmartRock2 Maturity Sensor, 10 ft (3m) HG-4040.10
Ship wt. 1lbs. (0.4kg)
Maturity Meter, Rechargeable H-2682 • Formwork removal timing
Ship wt. 8.9lbs. (4kg)
• Post-tensioning
• Opening road to traffic

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 157
CONCRETE Mixers

H-3846A
H-3847A H-3849A
H-3849A.G

Utility Mixer with Steel Drum Utility Mixer with Poly Drum Lightweight Wheelbarrow Mixer
ASTM C192 ASTM C192 ASTM C192
Drum mixing capacity is 3 cu. ft. (85 Liters). Drum Drum mixing capacity is 3 cu. ft. (85 Liters). Drum Drum mixing capacity is 3 cu. ft. (85 Liters). Light-
size: 5.5 cu. ft. (156 Liters). Compact, sturdy, size: 5.5 cu. ft. (156 Liters). Compact, sturdy, light- weight, portable mixer only weighs 125 lbs. High-
lightweight concrete mixer for concrete, mortar, weight concrete mixer for concrete, mortar, etc., torque, 1/2 HP electric motor with on/off switch.
etc., can be bolted to floor or skid for permanent can be bolted to floor or skid for permanent instal- Spins at 28 rpm. CE and CSA approved electric
installation. Convenient drum lock allows the lation. Convenient drum lock allows the operator motor. Strong polyurethane drum will not crack
operator to secure the drum in one of five posi- to secure the drum in one of five positions. Welded or rust and is easy to clean. Includes mixing stand.
tions. Welded steel frame and heavy bushings for steel frame and heavy bushings for a long depend- Ring gear is enclosed for safe operation. Transport
a long dependable life. Precision case, one-piece able life. Precision case, one-piece ring gear pro- handles adjust for easy storage. Can clear a 30"
ring gear provides years of service. Quad-mixing vides years of service. Non-stick, polyethylene (762mm) door opening. Ships unassembled in a
system utilizes a four-piece, replaceable paddle drum provides easy clean-up and is replaceable. box. Shipping Dimensions: 24" x 23" x 30" (610 x
and blade combination that creates four differ- Sturdy, in-mold mixing blades. Overall dimensions: 584 x 762mm).
ent mixing patterns for a more consistent mix. 41" x 26" x 55" (1041 x 660 x 1397mm).See chart Lightweight Wheelbarrow Mixer
Overall dimensions (mixer only): 41" x 26" x 55" for tow kit options. 1/2HP Electric, 110V 60Hz H-3846A
(1041 x 660 x 1397mm) See chart for tow kit Utility Mixer with Poly Drum 1/2HP Electric, 220V 50Hz H-3846A.5F
options. 1/2HP Electric, 110V 60Hz H-3849A Ship wt. 121lbs. (54kg)

Utility Mixer with Steel Drum 1/2HP Electric, 220V 60Hz H-3849A.2F Poly Drum Cover
1/2HP Electric, 110V 60Hz H-3847A 1/2HP Electric, 220V 50Hz H-3849A.5F Snug-fitting drum cover for H-3849 mixer.
1/2HP Electric, 220V 60Hz H-3847A.2F 3.5HP Gasoline Motor H-3849A.G Poly Drum Cover H-3849PC
1/2HP Electric, 220V 50Hz H-3847A.5F Ship wt. 346lbs. (156kg) Ship wt. 29lbs. (13.1kg)

3.5HP Gasoline Motor H-3847A.G Poly Drum Replacement

Ship wt. 366lbs. (166kg) 3 cu. ft. replacement liner for H-3849 mixer.
Poly Drum Replacement H-3849PL
Ship wt. 29lbs. (13.1kg)

H-3847 Tow Kit Options Hand Tow Kit High-Speed Tow Kit
Hand Tow Kit
H-3847AHT H-3847AHS
Mixer with
H-3849PC
Hand Tow Kit H-3847AHT.2F H-3847AHS.2F
with 2.75" x 10" H-3847AHT.5F H-3847AHS.5F
Semi-Pneumatic Tires
High-Speed Tow Kit H-3847AHT.G H-3847AHS.G
H-3849 Tow Kit Options Hand Tow Kit High-Speed Tow Kit
H-3849PL
H-3849AHT H-3849AHS
Mixer with
High-Speed Tow Kit H-3849AHT.2F H-3849AHS.2F
with 4.8" x 12" H-3849AHT.5F H-3849AHS.5F
Pneumatic Tires
H-3849AHT.G H-3849AHS.G

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

158
Beam Testing CONCRETE

H-3030A

H-3030CL

H-3005

Concrete Beam Tester Concrete Beam Molds, Heavy-Duty

Self-contained, shock-proof portable concrete ASTM C31, C78, C192, C293; AASHTO T23, T97
beam tester accurately and easily determines flex- Concrete Beam Molds, heavyweight, machined .375"
ural strengths of 6" x 6" cross-section test beams. steel. The sides of the one-piece mold hinge to the base
Hydraulically driven unit uses center-point loading and the ends hinge to the sides. Fastened with wing nuts.
method with continuous readings to the break and Reusable. Fast and easy to assemble and use. Easy to
retains maximum reading to eliminate lost data. strip, clean, knock-down and store. Molds give accurate
Gauge resets to zero for repeat tests. Lightweight specimens for center or third-point loading tests.
aluminum unit has dual registration of modulus of
Description Ship wt. Part No.
rupture between 15,000 lbf. and 0–6,800 kgf. The
unit is calibrated by measuring the load applied 6" x 6" x 21" (152 x 152 x 533mm) 54lbs (24.4kg) H-3005
on a calibrated load cell. The factory calibration is 6" x 6" x 24" (152 x 152 x 610mm) 67lbs (31kg) H-3010
H-3009
supplied at gauge readings of 10% FS, FS and 3 6" x 6" x 30" (152 x 152 x 762mm) 70lbs (31.7kg) H-3015
readings in between. Three load cell readings are
6" x 6" x 36" (152 x 152 x 914mm) 80lbs (36kg) H-3020
averaged at each point to establish the correction
for each point. Concrete Beam Mold, Plastic
The unit is not in full compliance with ASTM C293 ASTM C31, C78, C192, C293
since it uses a hand pump, but numerous govern- Durable, lightweight copolymer plastic beam mold uti-
ment agencies including Illinois DOT have found lizes simple thumb screws for ease of stripping, cleaning
its results acceptable for their purposes. and assembly. The lightweight design requires no tools
Concrete Beam Tester and weighs less than one quarter of the weight of a con-
16", Single-Point H-3030A ventional mold. Will not rust, reusable, inexpensive.
18", Single-Point H-3032A Description Ship wt. Part No.
18", Third Point H-3033A
Ship wt. 87lbs. (39.4kg) 6" x 6" x 21" (152 x 152 x 533mm) 9lbs (4kg) H-3009
H-3007
Concrete Beam Tester w/ Micro-pump Concrete Beam Mold, Lightweight
ASTM C293,C78; AASHTO T177 ASTM C31, C78, C192, C293; AASHTO T23, T97
By adding the Micro-pump to our Beam Tester Lightweight, stamped-steel, hinge-free beam mold is
allows the user to put a continuous load pressure collapsible. Can be disassembled in to individual, inter-
to the beam, which complies with the ASTM stan- changeable parts. Fastened with wing nuts.
dards. According to the ASTM, a load can be rap-
idly applied to the beam up to 50% of the expected Description Ship wt. Part No.
maximum load. Then, by using the micro-pump 6" x 6" x 22" (152 x 152 x 559mm) 29.2lbs (13kg) H-3007
the rest of the load can be applied continuously
Curing Covers for Beam Molds, Insulated
until failure. The range of the micro-pump allows it
Constructed of heavy-duty, rip-stop nylon with remov-
to add up to 10,000 lbf pressure.
able pad, which can be saturated with water for moisture
Concrete Beam Tester w/ Micro-pump retention during curing.
16", Single-Point H-3030CL H-3201.36
18", Single-Point H-3032CL Description Ship wt. Part No.
18", Third-Point H-3033CL Curing Cover 21", 22", 24" 1.5lbs (0.6kg) H-3021.24
Ship wt. 90lbs. (40.8kg)
Curing Cover 30" 1lbs (0.4kg) H-3021.30
Curing Cover 36" 1lbs (0.4kg) H-3021.36

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 159
CONCRETE Cylinder Molds
Cylinder Molds, Reusable, Metal
ASTM C31, C39, C192, C470; AASHTO T22, T23, T97, T126, T198
Molds are constructed of plated steel for rust resistance and are dimensionally stable under severe use.
Molds are split along one side with 2 quick-acting clamps welded to mold. When open, mold springs
apart slightly to allow specimen removal. Includes detachable base plate.
Size Description Ship wt. Model
.125" (3mm) wall thickness 18 lbs. (8.2kg) H-2942

6" x 12" (152 x 305mm) .25" (6mm) wall thickness 30 lbs (13kg) H-2950 H-2942

.25" (6mm) wall thickness with handle 24.2 lbs (10.9kg) H-2950H

.125" (3mm) wall thickness 10 lbs (4.5kg) H-2935 H-2950H

4" x 8" (102 x 203mm)
.25" (6mm) wall thickness 14 lbs (6.3kg) H-2934

3" x 6" (76 x 152mm) .25" (6mm) wall thickness 9 lbs (4kg) H-2931
3-Gang, split, cast bronze with heavy rib
2" x 4" (51 x 102mm) reinforcement. Quick-acting yoke clamps, 8 lbs (3.6kg) H-2920 H-2934
bolts and thumbscrews for locking halves.

H-2920
Concrete Cylinder Molds, Single-use, Plastic
C31, C39, C192, C470, C496; AASHTO T22, T23, T126, T198, M205
Disposable, plastic cylinder molds with flat bottoms. Easily stripped with stripper tools (order separately)..
Size Description Ship wt. Model
Reinforcing rib around top opening. Lids
26 lbs. (11.8kg)
6" x 12" (152 x 305mm) not included. Cartons of 36, H-3041
oversize UPS charges apply.
Reinforcing rib around top opening. Lids 15 lbs. (6.8kg)
6" x 12" (152 x 305mm) H-3041.20
not included. Cartons of 20
Plastic lid for use with H-3041 mold. H-3041
6"Ø (152mm) 0.08 lbs. (.04kg) H-3041L
Sold individually.
Complete with integral, domed plastic lid. 14 lbs (6.3kg)
4" x 8" (102 x 203mm) H-3037PML H-3037PML
Cartons of 36, oversize UPS charges apply.
Complete with integral, domed plastic lid. 16.4 lbs (7.4kg)
3" x 6" (76 x 152mm) H-3038PML
Cartons of 80, oversize UPS charges apply. H-3041L
Complete with integral domed plastic lid.
2" x 4" (51 x 102mm) 5 lbs (3.6kg) H-3039P
Cartons of 84.

Concrete Cylinder Molds, Reusable, Plastic

C31, C39, C192, C470, C496; AASHTO T22, T23, T126, T198, M205
Lightweight, impact resistant construction. Will not crack, rust or deform. Can be reused up to 100 times.
.25" (6.2mm) wall thickness. Sold individually.
Size Description Ship wt. Model
.25" (6.2mm) wall thickness.
6" x 12" (152 x 305mm) 4.1 lbs. (1.8kg) H-3043.6
Sold individually.
.25" (6.2mm) wall thickness. H-3043.6
4" x 8" (102 x 203mm) 14.2lbs (.5kg) H-3043.4
Sold individually. H-3043.4

Concrete Cylinder Molds, Single-use, Cardboard

C31, C39, C192, C470, C496; AASHTO T22, T23, T126, T198,
Size Description Ship wt. Model
6" x 12" (152 x 305mm) Carton of 24, oversize UPS charges apply 17 lbs (7.7kg) H-3040

4" x 8" (102 x 203mm) Carton of 50, oversize UPS charges apply 15 lbs (6.8kg) H-3037
H-3040
3" x 6" (76 x 152mm) Carton of 50, oversize UPS charges apply 10 lbs (4.5kg) H-3038 H-3037
2" x 4" (51 x 102mm) Carton of 50 5 lbs (2.2kg) H-3039

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

160
Mold Strippers, Cube Molds, Compaction CONCRETE
H-3755

H-3046 H-3041S
H-2905.1
H-3045
H-3650
H-3041SMA

H-2999A

H-2827

H-3753

Quick-Strip Mold Strippers H-3754A

H-2827MP
The Quick-Strip Mold Stripper from Humboldt pro-
vides fast, easy and safe stripping of cylinder molds Tamping (Puddling) Rod Vibrating Table
with one easy pull of its lever. With each pull of the Round, straight steel rod measures .625" (16mm) ASTM C31, C192, C293; AASHTO T23, T97
lever the Quick-Strip slices plastic cylinder molds dia. x 24" (610mm) long. Both ends rounded. Cushioned impact vibrating table with load capac-
with two opposing cuts, making removal of the Plated for rust resistance. ity of 300 lbs. (136.1kg) is used to vibrate beam
concrete cylinder easy. And, since the Quick-Strip Tamping (Puddling) Rod H-3650 forms, cylinder molds, concrete products and soil
is designed to be bench mounted, it will also save Ship wt. 4.3lbs. (1.9kg) specimens. Table deck is 20" x 20" (508 x 508mm).
your lower back from bending over to strip molds Tamping Rod Table vibrates at 3600 vpm. Amplitude or power
on the floor like you do with conventional stripping ASTM C157, C192 of vibration is regulated by means of a rheostat
tools. The Quick-Strip also doesn't bottom out the in the electrical control circuit. Not supplied with
Round, straight steel rod measures .375" (10mm)
knife blades when it cuts molds, so you'll save on cord and plug due to high wattage consumption
dia. x 12" (305mm) long. Both ends are rounded
the frequency of blade replacements. And, you'll requirements—must be connected through elec-
to a hemispherical tip of the same diameter as the
save wear and tear on your floors, which are often trical conduit and fittings.
rod.
ruined by repeated blade gouging.
Tamping Rod H-2905.1 Vibrating Table, 115V, 60Hz H-3755
• No more bending over molds on the floor Ship wt. 4.3lbs. (1.9kg) Vibrating Table, 230V, 60Hz H-3755.2F
• No more missed hammer blows Vibration Indicator, Tachometer Type Vibrating Table, 230V, 50Hz H-3755.5F
Ship wt. 115lbs. (52kg)
• No more stripping tools slipping off the mold Precision tachometer is pen size to allow accurate
• No more floor gouging readings even on hard-to-reach equipment. Scale Concrete Cube Mold, Steel
gives readings from 2,000 to 21,000. ASTM C403; AASHTO T97
The Quick-Strip will provide you with cylinder mold
Single-cavity steel cube mold with base plate.
stripping that's faster, safer and more efficient, Vibration Indicator, Tachometer Type H-3753
Ship wt. 1lbs. (1.9kg) Used for mortar specimens in the time of initial and
especially when you have large numbers of cylin-
final setting of concrete.
ders to process. Vibration Indicator, Visual Type
Visual indicator gives accurate reading of ampli- 6" x 6" x 6" (152 x 152 x 152mm) H-2827
Video: https://youtube/WUTRdgNu-24
tude of vibration so vibrating table may be 150 x 150 x 150mm H-2827M
Quick-Strip Mold Stripper, 4" x 8" H-3045 Ship wt. 27lbs. (12kg)
Ship wt. 75lbs. (34kg) adjusted.
Concrete Cube Mold, Steel, Heavy-Duty
Vibration Indicator, Visual Type H-3754A
Quick-Strip Mold Stripper, 6" x 12" H-3046 ASTM C403; AASHTO T97
Ship wt. 1lbs. (1.9kg)
Ship wt. 90lbs. (41kg)
Concrete Vibrator Single-cavity, two-part, steel cube mold with base
Replacement Blade for Strippers H-3046.1 plate. Used for compression testing of concrete
Ship wt. 1lbs. (1.9kg) ASTM C31, C138, C192; AASHTO T23, T97
cubes.
Lightweight square-head model is used for vibrat-
150 x 150 x 150mm H-2827MHD
ing concrete test cylinders and molds in the labo- Ship wt. 27lbs. (12kg)
ratory or field. Unit is flexible-shaft type, powered
H-3046.1 Concrete Cube Mold, Plastic
with 3/4 HP electric motor. Shaft is 24" (610mm)
long; vibrating head is 1" sq x 13" L (25 x 330mm) ASTM C403; AASHTO T97
Mold Strippers
with a speed of 10,000 vpm. 115V model is 7 amps Single-cavity plastic cube mold. Used for compres-
Mold strippers split single-use plastic cylinder
1ph and 230V model is 3.6 amps 1ph. sion testing of concrete cubes and for mortar speci-
molds for cylinder removal.
mens in the time of initial and final setting of concrete.
T-Handle Style H-3041S Concrete Vibrator, 115V, 50/60Hz H-2999A
Concrete Vibrator, 230V, 50/60Hz H-2999A.4F 150 x 150 x 150mm H-2827MP
Screwdriver Style H-3041SMA
Ship wt. 12lbs. (5.5kg) Ship wt. 3.5lbs (1.6kg)
Ship wt. 2lbs. (0.9kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 161
CONCRETE Cylinder Transport & Storage
H-2977S.6
H-2977S.12

H-2977C
HC-2963

HC-2965
HC-2966
H-2970A
H-2970.1

H-3042.18 Curing Rack for Concrete Cylinders Transport Rack for 4" Test Cylinders Perfa-Cure Curing Box, Heating & Air Flow
Durable, plastic cylinder curing racks provide a Test cylinder transport rack similar to above, but ASTM C31; AASHTO T23
stable and open air flow design for storing cylin- securely holds (16) 4" x 8" cylinders. Rack is 23" Lightweight Perfa-Cure Curing Box provides stor-
ders during curing. The racks are manufactured square by 7" high. age and protection for concrete test specimens on
from recycled plastic materials to resist moisture, Transport Rack for 4" Test Cylinders H-2970.2 the job site to meet required initial curing condi-
abrasion, as well as chemical and temperature Ship wt. 15lbs. (6.8kg) tions. Users plug in the unit and set the thermostat
variations. Each rack has built-in handles for easy Field Curing Chest to the desired temperature. This model provides
carrying. Each rack holds (4) 4" x 8" cylinders and The field curing chest offers the user with an afford- heating and ambient air flow functions. The heating
the interlocking racks can be stacked 12 high (58"). able approach to store, transport and cure con- panel uses a safe, aluminum base to radiate heat.
Curing Rack for Cylinders (6 racks) H-2977S.6 crete test cylinders. The chest consists of a 24" x The ambient air flow feature uses a blower fan to
Ship wt. 7 lbs ( 3.2kg) 24" x 14" (610 x 610 x 356mm) zipper-sealed poly- circulate ambient air inside the box. The unit auto-
Curing Rack for Cylinders (12 racks) H-2977S.12 mer and vinyl chest with 0.5" (12.7mm) insulating matically switches from heating ambient air flows
Ship wt. 27.1lbs. (12.2kg) foam. The unit can accept up to nine 6" x 12" con- based on conditions. The green indicator light illu-
Carrying Rack for Concrete Cylinders crete cylinders. minates when the unit is in operation. Compliant
Carrying rack for 4" x 8" test cylinders. Durable, Field Curing Chest H-2970A with current ASTM C31 and AASHTO T23 specifi-
molded plastic construction with molded handles Ship wt. 13.6lbs. (6.18kg) cations for initial curing of concrete test specimens
for easy and safe transportation. Easily carry 8 cyl- Perfa-Cure Mini Curing Box, Heat Only in the field. Robust carrying handles on each end
inders at a time in this plastic carrier, which will not ASTM C31; AASHTO T23 make transporting empty units easy. Heater panel
deteriorate or corrode in water. Allows you to keep and air flow fan are mounted on the inside of the
Small, Lightweight Perfa-Cure Curing Box provides
companion cylinders together in the same case for lid. The unit also provides a Mercury-free, Min/max
storage and protection for concrete test specimens
curing. thermometer to monitor temperatures. Both items
on the jobsite to meet required initial curing con-
Carrying Rack for Concrete Cylinders H-2977C are easily replaceable. Accommodates (10) 6" x
ditions. The heater panel is mounted on the inside
Ship wt. 4.5lbs. (1.8kg) 12" (152 x 305mm) or (32) 4" x 8" (102 x 203mm)
of lid and the unit also provides a Mercury-free,
Transport Rack for 6" Test Cylinders concrete cylinders
Min/max thermometer to monitor temperatures.
Test cylinder transport rack securely holds (8) 6" x Both items are easily replaceable. Curing box pro- Perfa-Cure Box, Heating & Cooling HC-2965
12" cylinders in a lightweight and durable frame, vides heat only. Accommodates (4) 6" x 12" (152 Perfa-Cure Box, Heating Only HC-2966
Ship wt. 40lbs. (18kg)
which can be secured to a truck bed or used in con- x 305mm) or (10) 4" x 8" (102 x 203mm) concrete
junction with the H-2970A field curing chest listed cylinders
below. Open center position is available for heater. Perfa-Cure Minni, Heat Only HC-2963
Will not rot or rust. Rack is 23.5" square by 9" high. Ship wt. 30lbs. (13.6kg)

Transport Rack for 6" Test Cylinders H-2970.1

Ship wt. 11.2lbs. (5.1kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

162
Cylinder Storage CONCRETE

H-2986A
H-2969.6

H-2968

H-2988A H-2735
H-2985

Concrete Curing Box, Deluxe drain fitting and 1.25" poly drain plug ensure a It has a protective housing that shields the pump and
ASTM C192, C511, C31; AASHTO M201, T126, T23 long-life. Tested to -20° F, corrosion-free impact heater from damage yet offers easy access for clean-
Curing Box for concrete cylinders is lightweight, resistant and recyclable. Premium UV protection ing. Flow management is easy with its convenient
and portable—74 lbs. (33.6kg). Plastic construction assures long life and resistance to color fade in slide control, which easily adjusts to adapt to any
is rugged, durable and rustproof. Up to 22 stan- outdoor use. Shipping weights: 8': 66lbs (29kg); need. Its adjustable mounting clamp fastens securely
dard 6" x 12" (152 x 305mm) test specimens can 6': 49lbs (22kg); 4': 30lbs. (13.6kg) to both flat and rounded tank walls.
be stored at 72 ±2°F (22.2 ±1.1°C) over an ambi- Poly Curing Tank, 3' x 2' x 8' H-2969.8 Working temperature: 135°F maximum
ent range of -10 to 100°F (-23 to 37.8°C). Sturdy, Poly Curing Tank, 2' x 2' x 6' H-2969.6 Temperature stability: ±0/07°C
14-gauge steel bottom rack provides optimum Poly Curing Tank, 2' x 2' x 4' H-2969.4
Ship wt. see above Pump: 1-speed
water circulation for even curing. Bottom valve
Precision Tank Heater Suitable for tank capacities to 28 liters and
for fast drainage. Lockable lid resists tampering.
Designed for efficient and economical indoor a minimum working depth of 7.25".
Requires minimum 15 amp circuit. Deluxe model
includes recirculating water temperature control operation with H-2969 series curing tanks where Circulator/Heater, 120V 60Hz H-2988A
unit with temperature set buttons, indicating lights temperature does not fall below 55°F (13°C). Circulator/Heater, 220V 50/60Hz H-2988A.4F
Ship wt. 9lbs. (4.08kg)
and digital readout for water temperature. Not Temperature is thermostatically controlled and
available in 220V 50/60Hz. Shipping Dimensions: adjustable. The 1,000W, 8.3 amp, 120V solid-state Chart Recorder, Circular
76" x 28" x 29" (193 x 71 x 73.6cm) L x W x H controlled element will warm to a maximum of This chart recorder provides reliable and rugged
200°F. Heater is Incoloy sheathed to prevent rust trend reporting with the ability to measure 3
Curing Box, Deluxe, 110V, 50/60Hz H-2968
Ship wt. 200lbs. (90.9kg) and is secured to aluminum base. Base provides different temperature ranges and 4 recording
protection for heater components from test cylin- speeds (6 or 24 hr. and 7 or 31 days). Large LED
Concrete Curing Box, Heating Only
ders in the tank. Overall length: 22.5" (57cm). display shows sensor temperature and all con-
ASTM C192, C511, C31; AASHTO M201, T126, T23
Precision Tank Heater, 110V 60Hz H-2986A trols are located on the front panel. Unit can
Curing Box for concrete cylinders is lightweight,
Precision Tank Heater, 220V 50/60Hz H-2986A.4F be free standing or wall mounted. Battery
and portable—74 lbs. (33.6kg). Plastic construction Ship wt. 5lbs. (2.2kg) backup provides operation during power inter-
is rugged, durable and rustproof. Up to 22 stan-
Curing Tank Circulator ruptions. Comes with 2 cartridge pens and 60
dard 6" x 12" (152 x 305mm) test specimens can
Silent submersion pump is 1/160hp (30W) with assorted charts. Sensor is not designed to be
be stored at 72 ±2°F (22.2 ±1.1°C) over an ambi-
120gph rating at 1ft. (30cm) height. Circulation fully immersible.
ent range of -10 to 100°F (-23 to 37.8°C). Sturdy,
from the 0.25" (6.4mm) MNPT discharge may be Chart Recorder (°F), 120V 60Hz H-2735F
14-gauge steel bottom rack provides optimum
aimed; simply place the housing on any of five Chart Recorder (°C), 120V 60Hz H-2735C
water circulation for even curing. Bottom valve
sides. Flow also may be directed using elbow con- Chart Recorder (°F), 220V 50/60Hz H-2735F.4F
for fast drainage. Lockable lid resists tampering.
nector (included) or by attaching extension tubing. Chart Recorder (°C), 220V 50/60Hz H-2735C.4F
Requires minimum 15 amp circuit. Heating-only Ship wt. 5lbs. (2.3kg)
Working parts are lubricated and sealed for life in
model, though cooling can be achieved by cool Charts for Chart Recorder
glass-filled nylon housing with flush inlet. Features
water recirculation, if available. Includes adjust-
6ft. (1.8m) grounded cord. Description Part No.
able heating control and dial thermometer. Not
available in 220V 50/60Hz. Shipping Dimensions: Curing Tank Circulator, 110V 60Hz H-2985 Probe w/ lead (15ft.), stainless steel H-2735A.3
64" x 28" x 29" (162.5 x 71 x 73.6cm) L x W x H Curing Tank Circulator, 220V 50/60Hz H-2985.4F
Ship wt. 3lbs. (1.3kg) Pen for H-2735 chart recorders (black) H-3185.3A
Curing Box, Heat only, 110V, 50/60Hz H-2967 6" 7-Day Chart, 50 to 120°F H-2735F.1
Ship wt. 120lbs. (54.5kg)
Immersion Circulator and Heater
This Immersion Circulator/Heater converts any tank 6" 24-Hr. Chart, 50 to 120°F H-2735F.5
Poly Curing Tanks
or vessel into a reliable, user-friendly circulating bath. 6" 7-Day Chart, 10 to 50°C H-2735C.1
Durable seamless design resists breakage. All
Remarkably versatile and convenient, it delivers 6" 24-Hr. Chart, 10 to 50°C H-2735C.5
round-end tanks have an extra heavy duty, molded
precise and reliable temperature control for virtually
rim and an extra-deep sidewall rib design for addi-
any laboratory application. The unit features a large,
tional strength. Heavy duty, molded-in aluminum
backlit digital display, which allows you to monitor a
set point and actual temperature from across the lab.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 163
CONCRETE Humidifiers

H-2737

H-2734
H-2735.5F H-2738 H-2914B

Fogging Fan for Humidity Control Fine Mist Fogging Fan Accessories for H-2737 & H-2738
Designed specifically for small spaces that need a The H-2737 bench-type fogging fan is a quiet and
dependable unit in environments up to 100% RH dependable fogging fan, perfectly suited for the Description Part No.
(relative humidity). Well suited for areas between small curing rooms. The H-2737 conveniently sits Floor Stand (Econo) H-2734.1
16 to 30 feet in length, (and can be used in smaller on flat surfaces or shelves and is extremely easy to Ceiling Support H-2734.2
areas down to 12 foot) this model has a maximum set up and operate. The nozzle-free fan can atom- Wall Mount H-2734.3
fogging output of 5 GPH and can propel fog up to ize ordinary water supplies into a very fine mist-like- Humidistat H-2737.1
20 feet. The H-2734 utilizes a two-blade fan, mak- fog, as well as pond water without the risk of clog- Thermostat H-2737.2
ing it about 30% quieter than larger units. The noz- ging. Utilizing high-speed centrifugal force and air Cycle Timer H-2737.3
zle-free fans can atomize ordinary water supplies flow, these units can propel a misty-fog stream up Mini 360° Oscillator H-2737.4
into a very fine mist-like fog. Utilizing high-speed to 20 feet away. The H-2737 is engineered to with-
centrifugal force and powerful air flow, these units stand humid conditions as high as 100% relative HumiDisk Humidifier
can propel a misty-fog stream up to 20 feet away. humidity. Units are constructed of impenetrable HumiDisk is a small, sturdy and easy-to-install
The powerful H-2734 is engineered to withstand components like Nema 4 boxes and connections, humidifier. It operates on a standard water supply
humid conditions as high as 100% RH and above, all 304 stainless steel hardware, UV-stabilized poly- line and is based on a simple and effective princi-
and corrosive environments containing salts, lime, ethylene housing and precision, high-strength ple. By exploiting the centrifugal force produced
ammonia and other acidic compounds. Units are injection molded polypropylene components. by a spinning disk, the humidifier atomizes the
constructed of impenetrable components like Units also reuse their condensation waste water, water into very fine droplets that can easily be
Nema 4 connections, all 304 SST hardware, UV eliminating the need of a near by drain. Bench top absorbed by the surrounding air, humidifying and
stabilized polyethylene plastics, PVC dip-coated units fill automatically by means of an internal float cooling at the same time. The energy consumption
steel, and sulfuric anodized aluminum. Standard valve and come equipped with a simple garden is just 34 W/(kg/h).
configuration includes a 1/2 HP Baldor wash- hose connection. A quarter-turn valve controls the
HumiDisk is easy to install and requires minimum
down-duty motor that is specifically designed for fogging output.
maintenance. Operating conditions are 34 to 95°F
wet, corrosive environments, 115/230V, 1ph, 60Hz. Similar to the H-2737, the H-2738 is a direct- (1.1 to 35°C), 0–100% RH non-condensing. The
Included with unit is an: adjustable-angle hanging feed, hanging unit, which receives liquid directly humidifier can be fitted with optional heaters that
bracket; visual flowmeter panel with strainer, 12 ft. through a visual flowmeter control panel. This are activated automatically at temperatures around
SJO indoor/outdoor, heavy-duty power cord; 20 provides for fine ”repeatable“ control of the 0°C, allowing operation down to -2°C.
ft. Poly-flo water line tubing; 16 ft. water drainage fogging output, as well as enhancing depend-
The unit is supplied with assembly brackets for
line; 100% stainless steel hardware, and easy-to- ability by eliminating sump components. Direct
easy wall mounting, or can be hung from the ceil-
follow operator’s manual. feed units are well suited for harsher environ-
ing using metal chains.
ments or applications where standing water
Fogging Fan, 115V, 50/60Hz H-2734 HumiDisk, 120 60Hz H-2914B
Ship wt. 60lbs. (27kg) in a sump could become an issue. Each unit is
Ship wt. 8lbs. (3.6kg)
equipped with a 5gph (20-300cc/min) flowmeter
Fogging Fan for Humidity Control
panel and 12 foot condensation drainage line.
Similar to the H-2734 Fan above, but utilizes a 1/3
Not available in 220V 50/60 Hz.
HP Baldor wash-down-duty motor that is specifi-
cally designed for wet, corrosive environments. Fogging Fan, Bench Type H-2737
Fogging Fan, Hanging Type H-2738
Fogging Fan, 240V, 50/60Hz H-2734.5F Ship wt. 24.6lbs. (11.2kg)
Ship wt. 48lbs. (22kg)
Specifications
Accessories for H-2734 & H-2734.5F
Description Part No.
Description Part No.
Fogging Capacity 0-3 gallons per hour
Floor Stand (Econo) H-2734.1 CFM Rating 1,125 cubic ft. per min.
Ceiling Support H-2734.2 Energy Consumption 1.5 amps @ 115V
Wall Mount H-2734.3 Noise @ 10 ft. 62dB(A)
24-Hour Timer H-2734.4 Dimensions 16" dia. x 16" length
Humidistat H-2734.5 Coverage about 500 sq. ft.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

164
Relative Humidity CONCRETE

H-2732 H-2736.SW
W

H-2736

H-2746
H-2747

H-2736.3 H-2736.2 H-2736.1

H-2736.4

Temperature/RH Loggers Relative Humidity Specifications Stevenson-type Screen Enclosure

These temperature and relative humidity data log- Sensor Type Capacitive The Stevenson-type screen, or instrument shel-
gers are housed in a robust, waterproof (IP68-rated) Reading Range 0 to 100% RH ter, shields data loggers against precipitation and
case, which is designed for use in harsh applica- Accuracy ±3.0% at 77°F (25°C) direct heat radiation from outside sources, while
tions like cylinder curing rooms. They are available Reading Resolution Better than 0.3% RH still allowing air to circulate freely around it.
with an integral, coated RH sensor (H-2736) or with Sensor Location Externally mounted Stevenson-type Screen Enclosure H-2736.4
a temperature and relative humidity probe with a Response Time 10 seconds to 90% Ship wt. 1.5lbs. (.68kg)
1.5m cable length (H-2732). The relative humid- High-Precision Temperature/RH Loggers
ity probe features a coated RH sensor that shows Temperature/RH Logger H-2736 Available in either a wireless LAN configuration
good resistance to moisture and condensation, Temperature/RH Logger with Probe H-2732 (H-2747) or in a wired LAN (H-2746), these data
ensuring measurement reliability. These data log- Ship wt. 0.3lbs. (.13kg)
loggers can automatically upload recorded data to
gers have a high reading resolution and accuracy Temperature/RH Logger Software the free T&D WebStorage service at a set interval.
and provide fast off-load speed and a low battery Explorer Software for operating H-2736 and
monitor. Data is downloaded to a computer for T&D WebStorage is a free service, which enables
H-2732 data loggers. This Windows-based pro- the viewing of uploaded data on your PC or mobile
viewing, reports and archiving. Data stored on the gram is simple and intuitive to use, allowing
logger will be retained after a battery is replaced. device, anytime or anywhere. Also, a new free
users to easily manage both Tinytag loggers and
See tables below for specific logger specifications. App is available, which enables the use of mobile
recorded data. A simple to use launch page that
Require H-2736.SW software and a download devices for making/changing device settings,
allows easy editing of a data logger’s settings, while
cable for operation. Dimensions: 1.75" x 2.25" x downloading recorded data from the wireless log-
at the same time summarizing them clearly. When
3.15" (34 x 57 x 80mm) ger and viewing a graph on the mobile device's
offloaded, recorded data is initially presented as a
screen. A USB connection is also provided to con-
graph but can also be displayed as a table of read-
Specifications nect the loggers to a PC. Both loggers come with a
ings if required. These views are supplemented
Reading Capacity 32,000 high-precision temperature/humidity sensor. Fea-
with an information view, that summarizes details
Memory Type Non-volatile 64K tures include a humidity measurement accuracy of
of the data being shown, and a daily minimum/
Reading Types Actual, Min, Max maximum view. Data can easily be exported from ±2.5%, as well as the wide-range measurement of
Relative / Absolute all four views into MS Excel and Word, either as a temperature from -23 to 158°F (-25 to 70°C) and
Delayed Start
(up to 45 days) humidity from 0-99%.
file or by simply copying and pasting. The software
Trigger Start Magnetic Switch (H-2736.3) These units are battery powered eliminating the
supports multiple languages, and there is also a
Alarms 2, fully programmable need for AC power, and, can last up to 1.5 years
comprehensive, illustrated help file to take the user
When full, After "n" before battery replacement. Logging capacity
through the basics of the software, and its more
Stop Options Readings, Never
overwrite oldest data advanced features. Site licenses are available for is 8000 data sets, which equates to a recording
-40°F to +185°F multiple installs. interval of once every 60 minutes for over a year.
Operating Range Provides logging interval can be set from 1 sec-
-40°C to +85°C Temperature/RH Logger H-2736.SW
Battery User-replaceable Lithium Ship wt. 1lbs. (.45kg) ond to 60 minutes. Easy operation is provided by
Logger Download Cables the unit's front buttons, which allow start and stop
Download cables to connect a PC to the H-2732 recording functions, interval changes and auto
Temperature Specifications
and H-2736 Loggers upload settings. Temperature/humidity sensor is
Sensor 10K NTC Thermistor included.
Range -13 to 185°F (-25 to 85°C) Download Cable, Serial H-2736.1
Download Cable, USB H-2736.2 High-Precision, Temperature/RH Loggers
25 mins to 90% FSD in
Response Time Ship wt. 0.5bs. (.22kg) Thermo Recorder, Temp./RH Logger, Wired H-2746
moving air
Accuracy 0.01°C or better Trigger Start Magnet Thermo Recorder, Temp./RH Logger, Wireless H-2747
Ship wt. 1.3bs. (.58kg)
A magnet for starting loggers that have been set
up for a trigger start.
Trigger Start Magnet H-2736.3
Ship wt. 0.1lbs. (.04kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 165
CONCRETE Cylinder Prep

HC-2971
HC-2980.1 HC-2980.2
HC-2980.3

HC-2980.2F.3
HC-2980.5F.3
HC-2979.2F.3
HC-2979.5F.3
HC-2970.2F
HC-2980.3 HC-2980.4
HC-2972
Specimen
men Grinding Machine Locking Stirrups, Cubes
HC-2979 & HC-2980 Specifications
ASTM standards
d d D4543, C31, C39, C192, and
d C617 For use with cube specimens, 100mm, 150mm and
6" x 12" (152 x 305mm) cylinder 200mm. Complete with 60mm high spacer.
This automatic grinding machine is designed to
4" x 8" (102 x 203mm)cylinder
grind and polish concrete cubes, cylinders, blocks, Locking Stirrups, Cubes HC-2980.3
3" x 6" (75 x 150mm) cylinder
natural stones, rocks and ceramic materials. Spec- 6" Cubes Ship wt. 25 lb (11.3kg)
imens are easily fixed to the table with the use of Specimen Size
100mm Cube Locking Stirrups, Block
the proper locking stirrups. See chart for specimen 150mm Cube For use with block specimens 390mm x 250mm.
types and sizes. 200mm Cube
Locking Stirrups, Block HC-2980.4
The revolving abrasive head is radially and alter- 390 x 250mm Block
Ship wt. 25 lb ( 11.3kg)
natively moved in both directions through an elec- Table Dims. 30.5" x 11.0" (775 x 280mm)
Masonry Saw
tric motor actuated by push button. The column Head Stroke 8.5" (215mm) Saw for use in cutting concrete and mortar cylin-
is completely protected against abrasive dust. The Wheel Dia. 13" (330mm) ders and blocks. Blade capacity is 20" (508mm),
grinding head can be lowered vertically in 0.05mm
Wheel Speed 1400rpm which allows a cutting depth of 8" (203mm). Capa-
graduations by using the top handhweel. The
Power Supply 400V, 3ph 4500W ble of cutting 8" x 8" x 16" block. Unit features a
machine is made from rugged plate and is supplied
48" x 42.5" x 68" (W x D x H) 3hp, 230 60hz 1ph Baldor motor. The saw has only
complete with: control panel; coolant/decantation Dimensions
(1220 x 1080 x 1730mm) two pivot points for reduced saw maintenance and
tank for water and emulsifying oil; motor pump; set
longer diamond blade life. The cutting head piv-
of standard abrasive sectors; safety chip guard that
Standard Abrasive Grinding Sections ots on bearings, which are sealed and lubricated
automatically stops the machine if it is removed.
Standard abrasive grinding sections provide excel- for life requiring no greasing. Its ergonomically
Both models are 3-Phase electric.
lent grinding capabilities and long life. Sold as a designed steel handle with molded grip bolts
Specimen Grinder, 240V, 60Hz-3PH HC-2980.2F.3 securely into place and the Sta-level® blade guard
set of 8.
Specimen Grinder, 240V, 50Hz-3PH HC-2980.5F.3 keeps the blade guard parallel to the cutting table
Standard Abrasive Grinding Sections HC-2980.5
Ship wt. 904lbs. (410kg) for accurate cuts. Height can be controlled with a
Ship wt. 20 lb ( 9.1kg)
Automatic Grinding Machine convenient crank control on foot pedal. Blade not
Same unit as the HC-2980 machines above, except Diamond Grinding Sections included, order below.
that the head is equipped with an end-of-stroke Diamond grinding sections provide enhanced
Masonry Saw, 230V, 60Hz HC-2970.2F
system, which allows full automatic displacement in grinding capabilities and long life. Sold individu-
Masonry Saw, 230V, 50Hz HC-2970.5F
both directions without activating the electric push- ally, 8 required.
Ship wt. 334lbs. (152kg)
button. This unit is designed for the simultaneous Diamond Grinding Sections HC-2980.6
Masonry Saw Blade, 20"
grinding of varied types of specimens, including Ship wt. 20 lb ( 9.1kg)
High-quality, 20" fast cutting blade for a variety of
concrete cube, cylinders, blocks and rock. It offers Fast Locking Device materials. Designed for dry or wet cutting. The seg-
the motorized radial displacement of the abrasive Fast locking device for use with Cubes 150 and ment height is .275", segment thickness is .125".
head in both directions. 200mm; Cylinders 100 to 160mm. Each device
Masonry Saw Blade, 20" HC-2971
Specimen Grinder, 240V, 60Hz-3PH HC-2979.2F.3 accepts only one specimen. It is possible to grind
Ship wt. 15lbs. (6.8kg)
Specimen Grinder, 240V, 50Hz-3PH HC-2979.5F.3 (1) 200mm cube, (2) 150mm cubes or (2) cylinders.
Ship wt. 904lbs. (410kg)
Saw Blade, Silent Runner 20"
Fast Locking Device HC-2980.1
A diamond blade for medium to large jobs and
NOTE: Grinding Machines include Standard Ship wt. 25 lb (11.3kg)
maximum production at a low cost per cut. It fea-
Abrasive Grinding Sections, but require the sepa- Locking Stirrups, Cylinders tures a laminated core for maximum noise reduc-
rate purchase of specimen locking devices, which For use with cylinder specimens, 4" x 8"and 6" tion. The segment height is .390", segment thick-
are not included. These items must be purchased x 12", 100mm, 150mm. Complete with 60mm ness is 14".
separately. Choose between the Fast Locking high spacer. Note: must be used in conjunction
Saw Blade, Silent Runner 20" HC-2972
Device or the appropriate Locking Stirrups for with HC-2980.3 for proper operation, order
Ship wt. 15bs. (6.8kg)
your operation. separately.
Locking Stirrups, Cylinders HC-2980.2
Ship wt. 25 lb (11.3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

166
Cylinder Prep CONCRETE

HC-2819.12 H-2900.4
H-2900.6

HC-2817

H-2945
H-2939

H-2938
H-2937
H-2937M

H-2943

H-2945G

Digital Caliper, 12" Verification Cylinder Concrete Cylinder Wrap

ASTM C174 Used with H-2939 Core Length Measuring Device Used to minimize fragment scattering and reduce
This 0-12" (0-305mm) digital caliper has 3.5" long to verify cylinder lengths. cleanup time after the compression test. Made of
jaw blades for use in measuring cylinders. It fea- Verification Cylinder, 4" x 8" H-2939.40 canvas/nylon with Velcro fastening strips.
tures a large, easy-to-read digital display, ergo- Verification Cylinder, 6" x 12" H-2939.60 Concrete Cylinder Wrap, 4" H-2900.4
nomic thumb rest; rolling thumb wheel; hold fea- Ship wt. 2.5lbs (1.1kg) Concrete Cylinder Wrap, 6" H-2900.6
ture, Inch/metric conversion, preset mode now Precision Diameter Tape Ship wt. 0.4lb (0.1kg)
includes offset for inside jaws. It provides digital ASTM D2166, D2850, D4767, BS1377:8 Concrete Micrometer
readout to .0005"/0.01mm for error-free reading Designed for accurately measuring diameters of
Diameter tapes provide a fast, reliable method for
and accuracy. concrete cylinders, micrometer has spindles of
measuring the diameter of concrete, soil and asphalt
Digital Caliper HC-2819.12 cores and cylinders. One reading provides round and hardened steel. Thimble and sleeve sections are
Digital Caliper, Certified HC-2819.12C out-of-round diameters within an accuracy of .001" chrome finish and have black graduations and
Ship wt. 3lbs. 1.3kg) (.03mm) by means of special graduations and vernier numbers. Instrument has a range of 5.5 to 6.5
Digital Caliper, 20" scale. All tapes are made from a stainless alloy and inches; readings can be made to hundredths or
ASTM C174 are precision engraved to ensure accuracy. Tape has thousandths in decimals.
This 0-20" (0-508mm) digital caliper has 5.9" long diameter range of 2" to 12" (50 to 300mm). Includes Concrete Micrometer H-2938
jaw blades for use in measuring cylinders. It fea- certificate of calibration. Tapes are calibrated and Ship wt. 3.8lbs. (1.7kg)

tures a large, easy-to-read LCD digit, rolling thumb include a NIST-traceable certification. Sample Cart, Welded
wheel; plus control buttons for zero, on/off and Core Length Measuring Device H-2937 Premium-grade all-welded cart has 800-lb.
inch/mm functions. It provides digital readout to Core Length Measuring Device, Metric H-2937M capacity. Features 5 x 1-1/4" casters mounted to
.0005"/0.01mm for error-free reading and an accu- Ship wt. 0.6lbs. (.2kg) cross-channel bolster plate for added support,
racy of ±.0025". Cylinder Carrier (Cradle Type) convenient offset handle and 36" x 24" (914 x
Digital Caliper HC-2817 Steel cylinder carrier is plated to resist rust. Used 609mm) tray size. Smooth finish; no rough edges.
Ship wt. 8lbs. (3.6kg) to carry 6" (152mm) dia. concrete cylinders in field Shipped assembled.
Core Length Measuring Device or laboratory. Sample Cart, Welded H-2943
ASTM C174 Cylinder Carrier (Cradle Type) H-2945 Ship wt. 75lbs. (34kg)

For determining concrete core lengths. Device Ship wt. 2.5lbs (1.1kg) Sample Cart, Bolt-Together
accommodates either 4" or 6" diameter specimens Cylinder Carrier (Gripper Type) For use in handling concrete beams and cylin-
up to 24" long. Allows measurements to be taken The H-2945 employs a hand-grip pincer action to ders, plus soil and aggregate samples in the lab
at the center of the specimen’s upper end, as well secure standard 6" (152mm) dia. cylinders. For 4" or field. Ready to assemble. Cart has pan-type
as eight equidistant points along the circumference. cylinders order the H-2945G-4". rolled-edge 3-1/2" (89mm) deep steel shelves. Top
Measuring rod has gradations on one end of 0.10" shelf reverses to flat working surface. Features 5"
Cylinder Carrier, 6" (Gripper Type) H-2945G
(2.5mm) apart and the other end is every 2mm. (127mm) dia. rubber casters; front casters swivel
Cylinder Carrier, 4" (Gripper Type) H-2945G-4"
Core Length Measuring Device H-2939 for easy steering. Dimensions: 24" x 36" x 32" (61
Ship wt. 3lbs (1.4kg)
Ship wt. 10.4bs. (0.1kg)
x 91 x 81cm). Assembly required.
Sample Cart, Bolt Together H-2944
Ship wt. 55lbs (25kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 167
CONCRETE Cylinder Capping
H-2951 Kit

H-2945

H-2953

H-2959

H-2958

H-2952

Cylinder Capping Kit Compound Melting Pots

ASTM C31, C39, C192, C617; AASHTO T22, T23, ASTM C617; AASHTO T231
T126, T231 Designed for melting capping compound, paraf-
Kit provides the basic components for cylinder fin and similar materials; compound melting pots
capping and includes: (1) H-2945 cylinder carrier, feature an adjustable thermostat to deliver close
(1) H-2952 vertical cylinder capper, (1) H-2953 temperature control automatically from 100° to
compound melting pot, (1) H-2959 capping com- 320°F (37.8 to 160°C). Includes cover, pilot light, 6'
pound and (1) H-2958 ladle. See individual compo- (1.8m) 3-conductor grounded cord set. Inner pot is
nents for descriptions. cast aluminum encased in a metal jacket with fiber-
Cylinder Capping Kit, 120V 60Hz H-2951 glass and air insulation, keeping heat loss to a min-
Cylinder Capping Kit, 220V 50/60Hz H-2951.4F imum. Replaceable heating elements are securely
Ship wt. 130lbs. (58.7kg) clamped to the bottom and sides of the crucible
for even heat distribution.
Capping Compound, Flake-style
ASTM C307, C321, C386, C579, C617, D71 Capacity Electric Amps Ship wt. Model
50 lb bag of Sauereisen No. 600 sulfur-based, 4 qt. 120V 60Hz 6 16.8 lbs H-2953
flake-form capping compound melts and sets
within minutes. Silica-filled compound has 150 3.8L 220V 50/60Hz 3 18 kg H-2953.4F
psi bond strength, 9000 psi compressive strength
8 qt. 120V 60Hz 10 20 lbs H-2954
and 605 psi tensile strength. Compound pours
between 265 and 290°F (129 to 143°C). Over- 7.6L 220V 50/60Hz 5 29 lbs H-2954.4F
heated material‘s viscosity is reinstated by decreas-
ing temperature to 290°F. 12 qt. 120V 60Hz 11 31 lbs H-2955

Capping Compound, Flake-style H-2959 11.4L 220V 50/60Hz 5.5 31.1 lbs H-2955.4F
Ship wt. 52lbs. (24kg)
20 qt. 120V 60Hz 12 48 lbs H-2948
Capping ladle
Stainless steel ladle with 4" (102mm) dia. bowl 19L 220V 50/60Hz 6 43.6 lbs H-2948.4F
is used in transferring capping compound from
melting pot to capping fixture. 28 qt. 120V 60Hz 15 48 lbs H-2949

Capping Ladle H-2958 26.5L 220V 50/60Hz 7.5 48 lbs H-2949.4F

Ship wt. 1.3lb (0.6kg)

Compound Melting Pots see chart above

Ship wt. see chart above

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

168
Cylinder Capping CONCRETE

H-2952 H-2925A

H-2946C

Vertical Cylinder Capper is a rigid, one-piece standard, which is machined Econ-o-Cap Capping Pads
ASTM C31, C39, C192, C617; AASHTO T22, T23, from high-strength, cast-aluminum alloy. ASTM C1231; AASHTO T22
T126, T231 2" x 4" (51 x 102mm) Cylinders H-2925A Single cylinder pads of specific size and durometer,
This heavy-duty vertical cylinder capper is used in 3" x 6" (76 x 152mm) Cylinders H-2925B sold individually. durometer ranges:
applying capping compound to 6" x 12" (152 x 4" x 8" (102 x 203mm) Cylinders H-2925C 50 durometer: 1500 to 2200 psi (10.3 to 15.1MPa)
305mm) concrete test cylinders in preparation for Ship wt. 18lbs. (8.1kg) 60 durometer: 2500 to 7000 psi (17.2 to 48.2MPa)
compression tests. The vertical capper simplifies Capping Plates 70 durometer: 4000 to 12000 psi (27.5 to 82.7MPa)
the capping process by ensuring the plane, end sur- Replacement capping and base plate assemblies
faces are at right angles to the axis of the cylinder. for H-2925 series vertical cylinder cappers. Econ-o-Cap Cylinder Pads Part #
The upright is used as a guide for positioning the 2" Pad, 60 Durometer H-2946ACP60
2" x 4" (51 x 102mm) Cylinders H-2925A.1
cylinder. Molten capping compound is poured into
3" x 6" (76 x 152mm) Cylinders H-2925B.1 2" Pad, 70 Durometer H-2946ACP70
the mold (plate); then the cylinder is placed on the
4" x 8" (102 x 203mm) Cylinders H-2925C.1
capping material. After the compound is set, the 3" Pad, 50 Durometer H-2946BCP50
Ship wt. 10.7lbs. (4.8kg)
capped cylinder is removed for testing. All types of 3" Pad, 60 Durometer H-2946BCP60
Econ-o-Cap Capping Pad Sets
capping compounds can be used with this appara-
ASTM C1231; AASHTO T22 3" Pad, 70 Durometer H-2946BCP70
tus. Capping plate is machined and finish-ground
from cold-rolled steel to within .002" (.05mm) plane- Econ-o-caps provide a highly-efficient and reus- 4" Pad, 50 Durometer H-2946CCP50
ness. Thickness of the capping plate is 0.75" (19mm), able method for capping concrete cylinders for use 4" Pad, 60 Durometer H-2946CCP60
to allow regrinding and refinishing after considerable in compression testing. Econ-o-caps eliminate the
4" Pad, 70 Durometer H-2946CCP70
usage should the plate become gouged. Capping time and labor expenses associated with capping
compounds. Sets are comprised of precision-ma- 6.125" Pad, 50 Durometer H-2946DCP50
plates are round, allowing circular rotation during use
that results in uniform wearing down of contacting chined, high-alloy steel retaining caps, which hold 6.125" Pad, 60 Durometer H-2946DCP60
surfaces for maximum length of service. The frame is tough, elastomeric material pads. These pads
6.125" Pad, 70 Durometer H-2946DCP70
machined from high-strength aluminum alloy. can be assembled quickly and provide a fast end
efficient method for distributing the test load uni- Old-Style Cylinder Pads Part #
Vertical Cylinder Capper, 6" x 12" H-2952
formly across the cylinder, smoothing out any irreg- 6.1875" Pad, 50 Durometer H-2946DOCP50
Ship wt. 25.7lbs. (11.3kg)
ularities and ensuring consistent breaks. The steel 6.1875" Pad, 60 Durometer H-2946DOCP60
Capping Plate
retaining rings can be used for years with care and
Replacement ring and bottom plate for H-2952 6.1875" Pad, 70 Durometer H-2946DOCP70
the pads are reusable up to 100 times or more with
vertical cylinder capper. Econ-o-Cap Capping Pads see chart above
the aid of qualification testing of the pad's durom-
Capping Plate, 6" x 12" H-2952.3 eter. Bearing surfaces of the retaining rings is plane see chart above
Ship wt. 16lbs. (7.3kg) within 0.002in (0.05mm). Sets include (2) rings and Econ-o-Cap Capping Rings
Vertical Cylinder Capper (2) pads. ASTM C1231; AASHTO T22
ASTM C31, C39, C192, C617; AASHTO T22, T23, Single Cylinder Rings, sold individually.
Econ-o-Cap Sets ship wt. Part #
T126, T231
2" Econ-o-Cap Set 4.3lbs. (2kg) H-2946A Econ-o-Cap Sets ship wt. Part #
These heavy-duty vertical cylinder cappers are used
in applying capping compound to concrete test 3" Econ-o-Cap Set 10bs. (4.5kg) H-2946B 2" Econ-o-Cap Ring 0.2lbs. (.09kg) H-2946AR
cylinders in preparation for compression tests. The 4" Econ-o-Cap Set 10.5lbs. (4.8kg) H-2946C 3" Econ-o-Cap Ring 4lbs. (1.8kg) H-2946BR
base and capping plate are machined from cold-
6" Econ-o-Cap Set 20lbs. (9.1kg) H-2946D 4" Econ-o-Cap Ring 5lbs. (2.7kg) H-2946CR
rolled steel and the capping plate is finish-ground
within .002" (.05mm) planeness. The cylinder guide 6" Econ-o-Cap Ring 10lbs. (4.5kg) H-2946DR
Econ-o-Cap Capping Pad Sets see chart above
see chart above Econ-o-Cap Capping Rings see chart above
see chart above

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 169
CONCRETE Compression Testing

Humboldt Digital Controllers and

Indicators for Compression Machines

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

170
Compression Testing CONCRETE

Features:
HCM-5080 and HCM-5070 • Provide two channel inputs for load, which allows for
HCM-5090
Automatic Controllers the control of two separate compression frames Digital Indicator
Humboldt’s HCM-5080 and HCM-5070 automatic • Provides two additional channel inputs for displace- Humboldt's HCM-5090 digital indicator provides
controllers are designed to make fast work of testing ment, which allows performing extensometer and the same platform and many of the same features
cylinders, cubes and beams with all of Humboldt‘s compressometer testing as the HCM-5080 and HCM-5070 except that it
compression frames. • 7", high-resolution color touch-screen display with does not act as a controller, but works with a manual-
live readout, graphical and tabular display ly-operated pump. The HCM-5090 digital indicator
These controllers provide an easy-to-use automat-
• Easy test setup, just choose the standard you wish features:
ed testing work flow— just choose the test standard
you wish to run from the menu and the controller will to test for and the controller will walk you through • Provide two channel inputs for load, which allows for
quickly guide you through the setup. Choose the ”Fast the complete setup the control of two separate compression frames
Testing“ option and your compression frame will run • Rapid approach, initial load and testing load are • Provides two additional channel inputs for displace-
tests as fast as you can load your cylinders, cubes or automated during test cycles ment, which allows performing extensometer and
blocks while sequentially numbering each test auto- • Automatic control of test parameters compressometer testing
matically. Just click on the start button. • Provides data acquisition of one reading per second • 7", high-resolution color touch-screen display with
The HCM-5080 and HCM-5070 controllers feature • Integral storage within the controller of up to 1000 live readout, graphical and tabular display
a robust, reliable and cool-running 1hp, multi-piston tests and 3000 points per test • Easy test setup, just choose the standard you wish
pump, which works together with the controller for full • Simple, Fast and accurate machine calibration with to test for and the controller will walk you through
operational control. accurate, motor-control knob the complete setup
These controller‘s high-resolution, 7-inch, color, touch- • Displays in Imperial or metric numbers • Provides data acquisition of one reading per second
screen provides accurate, precision frame operation, • Pre-programmed to run the following tests:
• Integral storage within the controller of up to 1000
setup and calibration. Test setup is simple, just choose ASTM C39, ASTM C78, ASTM C293, ASTM C469,
tests and 3000 points per test
the ASTM standard you wish to use and the control- ASTM C496, ASTM C1019, ASTM C109/C109M,
ler will quickly walk you through the setup procedure. BS EN 12390-3 • Simple, Fast and accurate machine calibration
Calibration is also easy with these controllers, allowing Humboldt’s HCM-5070 automatic controller is a con- • Displays in Imperial or metric numbers
you to use from 1 to 10 points to calibrate the machine sole version of the HCM-5080 automatic controller and
• Pre-programmed to run the following tests:
in any increment you choose. It also provides an accu- both share the same features.
ASTM C39, ASTM C78, ASTM C293, ASTM C469,
rate motor-control knob, which let's you dial in precise
Humboldt Automatic Controller HCM-5080 ASTM C496, ASTM C1019, ASTM C109/C109M,
loads for calibration.
Humboldt Automatic Controller HCM-5080.4F BS EN 12390-3
Ship wt. 180lbs. (82kg)
Humboldt‘s controllers provide two channel inputs for Humboldt Digital Indicator HCM-5090.3F
load, which allows for the control of two separate com- Humboldt Auto Console Controller HCM-5070 Ship wt. 13 lbs. (5.9kg)
pression frames when using the HCM-HP4014 selector Humboldt Auto Console Controller HCM-5070.4F
Ship wt. 200lbs. (91kg)
valve accessory. Both controllers also provide two addi-
tional channel inputs for displacement, which provides
an easy solution for determining Poisson's ration and Automatic Controllers for upgrading existing compression frames
Young's modulus testing. Looking to upgrade your existing compression machine? Now you can easily upgrade it with one
of Humboldt‘s automatic compression machine controllers — the HCM-5080 and HCM-5070. Both
Humboldt's automatic controllers provide data acqui-
controllers come with our robust, reliable and cool-running 1hp pump, which works together with the con-
sition capabilities of up to 1000 tests with 3000 points
troller for full operational control of your compression machine. The HCM-5080 upgrade kit come with neces-
per test. This information can be exported via the front
sary brackets and mounting hardware and both are available with new compatible transducers making these
USB port and a flash drive.
upgrade kits a quick and easy upgrade. See next page for more information on Humboldt's digital controllers
and indicators.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 171
CONCRETE Compression Testing
Humboldt Controller Specifications
HCM-5080 120V 60Hz
HCM-5080.4F 220V 50/60HZ
HCM-5070 120V 60Hz
HCM-5070.4F 220V 50/60HZ
HCM-5090.3F 120/220V 50/60HZ
7” (178mm) VGA (480 x 800)
Display
Resistive-touch screen
Processor Dual 32-bit ARM

RAM 4GB
Analog to digital
24 bit HCM-720
converter
Data acquisition 4 Channels
Data Speed 1000Hz (1kH) HCM-720 Digital Indicator
ASTM C39, E4, AASHTO T22
Logging speed 1 reading per second
The i7 is an easy-to-use digital load indicator that
Multi-test storage 1000 simultaneously displays both live load and rate of
load values during a test. It eliminates the need to
Points per test 3000 toggle keys between functions, and, automatically
displays peak load and average rate of load at the
end of each test.
All test information is clearly displayed on the indi-
cator's 5.3" (135 mm) wide 240 x 64 pixel backlit
V.G.A., liquid-crystal display with adjustable contrast
settings. Test data is displayed in user selectable
Accessories for HCM-5080 & HCM-5070 engineering units of lbs, kN, kg and N with rate of
load displayed in force units per second.
Pressure Transducer, 10,000 psi
HCM-4177 The indicator will store up to 600 tests in memory,
with Cable and Plug
and transfer them directly into a word document via
HCM-4177.1 Pressure Transducer, 10,000 psi
the optional USB Able Cable, or print them on an
Cable for Pressure Transducer optional serial printer. Stored test data includes; test
HCM-4177.4
10,000 psi with Plug date and time, sample ID number, peak load and
ISO VG 46 Hydraulic Oil, average rate of load. The average rate of load calcu-
HCM-005050 lation is based on the average load rate applied to
1L (2L required)
the sample during the second half of the test.
HCM-HP4014 Frame Selector Valve
The i7 is also available as a retrofit package.
HCM-720 Digital Indicator HCM-720
Ship wt. 13 lbs. (5.9kg)

Accessories for HCM-5090

Pressure Transducer, 10,000 psi
HCM-4177
with Cable and Plug
HCM-4177.1 Pressure Transducer, 10,000 psi
Cable for Pressure
HCM-4177.4
Transducer with Plug

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

172
Compression Testing CONCRETE

HCM-3000iH
HCM-2500iHA

HCM-4000iHA

HCM-2500 Series Compression Machines HCM-3000 Series Compression Machines HCM-4000 Series Compression Machines
ASTM C39, E4, AASHTO T22 ASTM C39, E4, AASHTO T22 ASTM C39, E4, AASHTO T22
• Suitable for cylinders, cubes, beams and cores • Suitable for cylinders, cubes, beams and cores • Suitable for cylinders, cubes, beams and cores
of standard strength concrete mixes of standard strength concrete mixes of high-strength concrete mixes
• 2500 to 250,000 lbf (11 to 1112kN) testing • 3000 to 300,000 lbf (13.3 to 1334kN) testing • 4000 to 400,000 lbf (17.8 to 1780kN) testing
range with accuracy of ±0.5% of indicated load range with accuracy of ±0.5% of indicated load range with accuracy of ±0.5% of indicated load
• Suitable for concrete strength up to 7,000 psi • Suitable for concrete strength up to 9,000 psi • Suitable for concrete strength up to 11,000 psi
for 6" diameter cylinders for 6" diameter cylinders for 6" diameter cylinders
• Standard configuration includes platens to test • Standard configuration includes platens to test • Standard configuration includes platens to test
6" x 12" (150mm x 300mm) cylinders. 6" x 12" (150mm x 300mm) cylinders. 6" x 12" (150mm x 300mm) cylinders.
• Choice of two digital controller and two digital • Choice of two digital controller and two digital • Choice of two digital controller and two digital
indicators ( see pages 170-171) indicators ( see pages 170-171) indicators ( see pages 170-171)
• Optional test platens and accessories available • Optional test platens and accessories available • Optional test platens and accessories available
on pages 177-178 on pages 177-178 on pages 177-178
• Steel protective doors, not plastic. • Mounting stand: OPTIONAL, order: HCM-0300 • Large frame opening to allow easier loading of
• Mounting stand: OPTIONAL, order: HCM-0200 test specimens
• Mounting stand is INCLUDED

Specification Value Specification Value Specification Value

Vertical Opening 19.375" (492mm) Vertical Opening 18.5" (470mm) Vertical Opening 18.375" (467mm)
Horizontal Opening 9.25" (235mm) Horizontal Opening 9.5" (241mm) Horizontal Opening 13.312" (338mm)
Piston Stroke 2.5" (63.5mm) Piston Stroke 3" (76mm) Piston Stroke 2.5" (63.5mm)
Lower Platen, Dia. 6.5" (165mm)ø Lower Platen 9" x 12" (229 x 305mm) Lower Platen 12.5" x 18" (318 x 475mm)
Upper Platen, Dia. 6.5" (165mm) Upper Platen, Dia. 6.5" (165mm) Upper Platen, Dia. 6.5" (165mm)
Oil Reservoir Cap. 2 gal (7.6 liter) Oil Reservoir Cap. 2 gal (7.6 liter) Oil Reservoir Cap. 2 gal (7.6 liter)
Overall Width 27" (686mm) Overall Width 31.5" (800mm) Overall Width 39.875" (1013mm)
Overall Depth 17" (432mm) Overall Depth 17" (432mm) Overall Depth 20" (508mm)
Overall Height 56.312" (1430mm) Overall Height 58.5" (1486mm) Overall Height 61.250" (1556mm)

See Page 174-175 for models and ordering information. See Page 174-175 for models and ordering information. See Page 174-175 for models and ordering information.
HCM-2500 Series Compression Machines HCM-3000 Series Compression Machines HCM-4000 Series Compression Machines
Ship wt. 885 lbs. (401kg) Ship wt. 1078 lbs. (488kg) Ship wt. 1700 lbs. (771kg)

Frame opening dimensions are measured without test platens

installed in machine. Overall machine dimensions are measured
with the stand, including machines where it is optional.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 173
CONCRETE Compression Testing

HCM-0030iH HCM-1000iH

Shown with Optional

HCM-5000iH Flexural Attachment
for Beams.

HCM-5000 Series Compression Machines HCM-0030 Series Compression Machines HCM-1000 Series Compression Machines
ASTM C39, E4, AASHTO T22 ASTM C39, E4, AASHTO T22 ASTM C39, E4, AASHTO T22
• Suitable for cylinders, cubes, beams and cores • Suitable for beams of standard strength The HCM-1000 has been custom-configured to be
of high-strength concrete mixes concrete mixes used for mortar applications like 2" and 4" cubes,
• 5000 to 500,000 lbf (22.2 to 2224kN) testing • 300 to 30,000 lbf (1.3 to 113.5kN) testing range beams and other low-strength materials, below
range with accuracy of ±0.5% of indicated load with accuracy of ±0.5% of indicated load 100,000 lbs. (445kN). These machines are based
on HCM-2500 frames, which have been recon-
• Suitable for concrete strength up to 14,000 psi • Standard configuration includes no platens.
figured for accurate readings of lower-strength
for 6" diameter cylinders Order HCM-0119A for beam testing
materials. The machines are sold without platens,
• Standard configuration includes platens to test • Choice of two digital controller and two digital
so be sure to order the appropriate set for your
6" x 12" (150mm X 300mm) cylinders. indicators ( see pages 170-171)
applications.
• Choice of two digital controller and two digital • Optional test platens and accessories available
• Custom-configured for mortar applications like
indicators ( see pages 170-171) on pages 177-178
2" and 4" cubes
• Optional test platens and accessories available • Available as an auxiliary frame design with
• 1,000 to 100,000 (11 to 445kN) testing range
on pages 177-178 no controller or pump; includes mounting
with accuracy of ±0.5% of indicated load
• Large frame opening to allow easier loading of stand, load frame selector valve and overload
• Choice of two digital controller and two digital
test specimens protection.
indicators ( see pages 170-171)
• Mounting stand is INCLUDED • Mounting stand: OPTIONAL, order: HCM-0032
• Machine comes with no platens, order the
appropriate set for your applications
Specification Value Specification Value • Mounting stand: OPTIONAL, order: HCM-0200
Vertical Opening 18.375" (467mm) Vertical Opening 18.5" (470mm)
Specification Value
Horizontal Opening 14" (356mm) Horizontal Opening 9.250" (235mm)
Vertical Opening 19.375" (492mm)
Piston Stroke 2.5" (63.5mm) Piston Stroke 2.125" (54mm)
Horizontal Opening 9.25" (235mm)
Lower Platen 12.5" x 18" (318 x 475mm) Lower Platen, Dia. NA
Piston Stroke 2.5" (63.5mm)
Upper Platen, Dia. 6.5" (165mm) Upper Platen, Dia. NA
Lower Platen NA
Oil Reservoir Cap. 2 gal (7.6 liter) Oil Reservoir Cap. 2 gal (7.6 liter)
Upper Platen, Dia. NA
Overall Width 30" (762mm) Overall Width 28.625" (727mm)
Oil Reservoir Cap. 2 gal (7.6 liter)
Overall Depth 23.750" (603mm) Overall Depth 16" (406mm)
Overall Width 30" (762mm)
Overall Height 60.625" (1540mm) Overall Height 51.50" (1308mm)
Overall Depth 23.750" (603mm)
Overall Height 60.625" (1540mm)
See Page 174-175 for models and ordering information. See Page 174-175 for models and ordering information.
HCM-5000 Series Compression Machines HCM-0030 Series Compression Machines
Ship wt. 460 lbs. (208kg) See Page 174-175 for models and ordering information.
Ship wt. 2500 lbs. (1134kg)
HCM-1000 Series Compression Machines
Optional Travel Limit Switch Ship wt. 655lbs. (297kg)
An electrical switch that prevents the hydraulic piston from
going beyond its maximum travel point. Frame opening dimensions are measured without test platens
Limit Switch, HCM-2500 Series HCM-TM0101 installed in machine. Overall machine dimensions are measured
Limit Switch, HCM-3000 Series HCM-TM0106 with the stand, including machines where it is optional.
Limit Switch, HCM-4000 Series HCM-TM0100
Limit Switch, HCM-5000 Series HCM-TM0102
Ship wt. 3 lbs. (1.4kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

174
Compression Testing CONCRETE
Concrete Compression Machine Ordering Matrix

HCM-4000BiHA.2F Electrical
Configuration
Load Capacity 110V 60Hz use no suffix
Block/Prism 220V 60Hz use .2F suffix
Pump
Block use B suffix Controller 1hp Automatic use A suffix
220V 50Hz use .5F suffix
Prism use P suffix HCM-5080 use iHA suffix 1/2hp use no suffix
HCM-5070 use iHAC suffix 3/4hp use P suffix
HCM-5090 use iH suffix
HCM-720 use i7 suffix

Concrete Compression Frame (ONLY)

Compression Machine Order Number
Compression Machine, 30,000 (133.5kN) HCM-0030
Compression Machine, 100,000 (445kN) HCM-1000
Compression Machine, 250,000 (1,112kN) HCM-2500
Compression Machine, 300,000 (1,334kN) HCM-3000
Compression Machine, 400,000 (1,780kN) HCM-4000
Compression Machine, 500,000 (2,224kN) HCM-5000
Compression Machine Block Series, 400,000 (1,780kN) HCM-4000B
Compression Machine Block Series, 500,000 (2,224kN) HCM-5000B
Compression Machine Prism Series, 400,000 (1,780kN) HCM-4000P
Compression Machine Prism Series, 500,000 (2,224kN) HCM-5000P

HCM-0030 Series: 30,000 lbs. (133.5 kN) HCM-1000 Series: 100,000 lbs. (445 kN)
Controller Pump Size Electrical Order Number Controller Pump Size Electrical Order Number
HCM-5080 120V 60Hz HCM-0030iHA HCM-5080 120V 60Hz HCM-1000iHA
HCM-5080.4F 1hp 230V 50-60Hz HCM-0030iHA.4F HCM-5080.4F 1hp 230V 50-60Hz HCM-1000iHA.4F
HCM-5070 Automatic 120V 60Hz HCM-0030iHAC HCM-5070 Automatic 120V 60Hz HCM-1000iHAC
HCM-5070.4F 230V 50-60Hz HCM-0030iHAC.4F HCM-5070.4F 230V 50-60Hz HCM-1000iHAC.4F
HCM-5090.3F 1/2hp Manual 120V 60Hz HCM-0030iH HCM-5090.3F 1/2hp Manual 120V 60Hz HCM-1000iH
HCM-5090.3F 1/2hp Manual 230V 60Hz HCM-0030iH.2F HCM-5090.3F 1/2hp Manual 230V 60Hz HCM-1000iH.2F
HCM-5090.3F 1/2hp Manual 230V 50Hz HCM-0030iH.5F HCM-5090.3F 1/2hp Manual 230V 50Hz HCM-1000iH.5F
HCM-720 1/2hp Manual 120V 60Hz HCM-0030i7 HCM-720 1/2hp Manual 120V 60Hz HCM-1000i7
HCM-720 1/2hp Manual 230V 60Hz HCM-0030i7.2F HCM-720 1/2hp Manual 230V 60Hz HCM-1000i7.2F
HCM-720 1/2hp Manual 230V 50Hz HCM-0030i7.5F HCM-720 1/2hp Manual 230V 50Hz HCM-1000i7.5F

HCM-2500 Series: 250,000 lbs. (1,112 kN) HCM-3000 Series: 300,000 lbs. (1,334 kN)
Controller Pump Size Electrical Order Number Controller Pump Size Electrical Order Number
HCM-5080 120V 60Hz HCM-2500iHA HCM-5080 120V 60Hz HCM-3000iHA
HCM-5080.4F 1hp 230V 50-60Hz HCM-2500iHA.4F HCM-5080.4F 1hp 230V 50-60Hz HCM-3000iHA.4F
HCM-5070 Automatic 120V 60Hz HCM-2500iHAC HCM-5070 Automatic 120V 60Hz HCM-3000iHAC
HCM-5070.4F 230V 50-60Hz HCM-2500iHAC.4F HCM-5070.4F 230V 50-60Hz HCM-3000iHAC.4F
HCM-5090.3F 1/2hp Manual HCM-2500iH HCM-5090.3F 1/2hp Manual HCM-3000iH
120V 60Hz 120V 60Hz
HCM-5090.3F 3/4hp Manual HCM-2500iHP HCM-5090.3F 3/4hp Manual HCM-3000iHP
HCM-5090.3F 1/2hp Manual HCM-2500iH.2F HCM-5090.3F 1/2hp Manual HCM-3000iH.2F
230V 60Hz 230V 60Hz
HCM-5090.3F 3/4hp Manual HCM-2500iHP.2F HCM-5090.3F 3/4hp Manual HCM-3000iHP.2F
HCM-5090.3F 1/2hp Manual HCM-2500iH.5F HCM-5090.3F 1/2hp Manual HCM-3000iH.5F
230V 50Hz 230V 50Hz
HCM-5090.3F 3/4hp Manual HCM-2500iHP.5F HCM-5090.3F 3/4hp Manual HCM-3000iHP.5F
HCM-720 1/2hp Manual HCM-2500i7 HCM-720 1/2hp Manual HCM-3000i7
120V 60Hz 120V 60Hz
HCM-720 3/4hp Manual HCM-2500i7P HCM-720 3/4hp Manual HCM-3000i7P
HCM-720 1/2hp Manual HCM-2500i7.2F HCM-720 1/2hp Manual HCM-3000i7.2F
230V 60Hz 230V 60Hz
HCM-720 3/4hp Manual HCM-2500i7P.2F HCM-720 3/4hp Manual HCM-3000i7P.2F
HCM-720 1/2hp Manual HCM-2500i7.5F HCM-720 1/2hp Manual HCM-3000i7.5F
230V 50Hz 230V 50Hz
HCM-720 3/4hp Manual HCM-2500i7P.5F HCM-720 3/4hp Manual HCM-3000i7P.5F

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 175
CONCRETE Compression Testing
Concrete Compression Machine Ordering Matrix

HCM-4000 Series: 400,000 lbs. (1,780 kN) HCM-5000 Series: 500,000 lbs. (2,224 kN)
Controller Pump Size Electrical Order Number Controller Pump Size Electrical Order Number
HCM-5080 120V 60Hz HCM-4000iHA HCM-5080 120V 60Hz HCM-5000iHA
HCM-5080.4F 1hp 230V 50-60Hz HCM-4000iHA.4F HCM-5080.4F 1hp 230V 50-60Hz HCM-5000iHA.4F
HCM-5070 Automatic 120V 60Hz HCM-4000iHAC HCM-5070 Automatic 120V 60Hz HCM-5000iHAC
HCM-5070.4F 230V 50-60Hz HCM-4000iHAC.4F HCM-5070.4F 230V 50-60Hz HCM-5000iHAC.4F
HCM-5090.3F 3/4hp Manual 120V 60Hz HCM-4000iHP HCM-5090.3F 3/4hp Manual 120V 60Hz HCM-5000iHP
HCM-5090.3F 3/4hp Manual 230V 60Hz HCM-4000iHP.2F HCM-5090.3F 3/4hp Manual 230V 60Hz HCM-5000iHP.2F
HCM-5090.3F 3/4hp Manual 230V 50Hz HCM-4000iHP.5F HCM-5090.3F 3/4hp Manual 230V 50Hz HCM-5000iHP.5F
HCM-720 3/4hp Manual 120V 60Hz HCM-4000i7P HCM-720 3/4hp Manual 120V 60Hz HCM-5000i7P
HCM-720 3/4hp Manual 230V 60Hz HCM-4000i7P.2F HCM-720 3/4hp Manual 230V 60Hz HCM-5000i7P.2F
HCM-720 3/4hp Manual 230V 50Hz HCM-4000i7P.5F HCM-720 3/4hp Manual 230V 50Hz HCM-5000i7P.5F

HCM-4000B Masonry Block Series: 400,000 lbs. (1,780 kN) HCM-5000B Masonry Block Series: 500,000 lbs. (2,224 kN)
Controller Pump Size Electrical Order Number Controller Pump Size Electrical Order Number
HCM-5080 120V 60Hz HCM-4000BiHA HCM-5080 120V 60Hz HCM-5000BiHA
HCM-5080.4F 1hp 230V 50-60Hz HCM-4000BiHA.4F HCM-5080.4F 1hp 230V 50-60Hz HCM-5000BiHA.4F
HCM-5070 Automatic 120V 60Hz HCM-4000BiHAC HCM-5070 Automatic 120V 60Hz HCM-5000BiHAC
HCM-5070.4F 230V 50-60Hz HCM-4000BiHAC.4F HCM-5070.4F 230V 50-60Hz HCM-5000BiHAC.4F
HCM-5090.3F 3/4hp Manual 120V 60Hz HCM-4000BiHP HCM-5090.3F 3/4hp Manual 120V 60Hz HCM-5000BiHP
HCM-5090.3F 3/4hp Manual 230V 60Hz HCM-4000BiHP.2F HCM-5090.3F 3/4hp Manual 230V 60Hz HCM-5000BiHP.2F
HCM-5090.3F 3/4hp Manual 230V 50Hz HCM-4000BiHP.5F HCM-5090.3F 3/4hp Manual 230V 50Hz HCM-5000BiHP.5F
HCM-720 3/4hp Manual 120V 60Hz HCM-4000Bi7P HCM-720 3/4hp Manual 120V 60Hz HCM-5000Bi7P
HCM-720 3/4hp Manual 230V 60Hz HCM-4000Bi7P.2F HCM-720 3/4hp Manual 230V 60Hz HCM-5000Bi7P.2F
HCM-720 3/4hp Manual 230V 50Hz HCM-4000Bi7P.5F HCM-720 3/4hp Manual 230V 50Hz HCM-5000Bi7P.5F

HCM-4000P Masonry Prism Series: 400,000 lbs. (1,780 kN) HCM-5000P Masonry Prism Series: 500,000 lbs. (2,224 kN)
Controller Pump Size Electrical Order Number Controller Pump Size Electrical Order Number
HCM-5080 120V 60Hz HCM-4000PiHA HCM-5080 120V 60Hz HCM-5000PiHA
HCM-5080.4F 1hp 230V 50-60Hz HCM-4000PiHA.4F HCM-5080.4F 1hp 230V 50-60Hz HCM-5000PiHA.4F
HCM-5070 Automatic 120V 60Hz HCM-4000PiHAC HCM-5070 Automatic 120V 60Hz HCM-5000PiHAC
HCM-5070.4F 230V 50-60Hz HCM-4000PiHAC.4F HCM-5070.4F 230V 50-60Hz HCM-5000PiHAC.4F
HCM-5090.3F 3/4hp Manual 120V 60Hz HCM-4000PiHP HCM-5090.3F 3/4hp Manual 120V 60Hz HCM-5000PiHP
HCM-5090.3F 3/4hp Manual 230V 60Hz HCM-4000PiHP.2F HCM-5090.3F 3/4hp Manual 230V 60Hz HCM-5000PiHP.2F
HCM-5090.3F 3/4hp Manual 230V 50Hz HCM-4000PiHP.5F HCM-5090.3F 3/4hp Manual 230V 50Hz HCM-5000PiHP.5F
HCM-720 3/4hp Manual 120V 60Hz HCM-4000Pi7P HCM-720 3/4hp Manual 120V 60Hz HCM-5000Pi7P
HCM-720 3/4hp Manual 230V 60Hz HCM-4000Pi7P.2F HCM-720 3/4hp Manual 230V 60Hz HCM-5000Pi7P.2F
HCM-720 3/4hp Manual 230V 50Hz HCM-4000Pi7P.5F HCM-720 3/4hp Manual 230V 50Hz HCM-5000Pi7P.5F

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

176
Compression Testing CONCRETE

The heavy-duty load frames use the same proven

design and manufacturing process found in all of HCM-0802
our machines, with a wide horizontal opening and
large compression platen table for easier load-
ing of heavy specimens. The machine's included
mounting stand also places the lower platen at a
shown with
convenient working height.
optional
These machines' unique lower, dual-platen sys-
Platen Carrier Draw Rod Assembly
tem features a wear platen through-hardened to
Bracket Draw rods are included with all masonry model
60 HRC or greater and is designed for fast and
machines. The draw rod system is used to adjust
easy maintenance without the need for expensive
the inside vertical working height of the load
rental equipment to remove the platen, unlike the
frame, to allow for testing samples of different
HCM-5000iH cumbersome single-plate systems used in com-
heights through the use of spacers and test plat-
petitive units. Changing test platens and spacers
ens. The system is made up of a steel hand wheel
is quick, easy, and safe with our draw rod, used
with internal ball bearings and a threaded rod that
to adjust the load frame’s inside vertical working
is easily raised or lowered inside the load frame for
height, and optional carrier bracket system, which
height adjustment. Spacers slide onto the rod, the
features a heavy-duty arm mounted on the rear
rod is threaded into the test platen and the assem-
HCM-5000P left corner of the load frame that pivots on two
bly is then tightened against the cross-head.
hinged joints. When the block platen is not being
Draw Rod Assembly HCM-0802
used, it can be conveniently stored on the brack-
Masonry Series Compression Machines Ship wt. 38 lbs. (17.3kg)
et’s arm. Includes mounting stand.
ASTM C39, C140, C1314, E4, AASHTO T-22
Optional test platens and accessories add to the
Masonry series machines are available in two
versatility of the block and prism machines, see
capacities: 400,000 (1,780kN) and 500,000
pages 179-180.
(2,224kN) with a testing range from 1 to 100% of
machine capacity, with an accuracy of ±5% of indi- See Page 177 for models and ordering information.
cated load. Masonry series compression testing HCM-4000B Series Block Machines
Ship wt. 1,700 lbs. (771kg)
machines are available in two load frame config-
See Page 177 for models and ordering information. HCM-0190SP
urations for testing single- or two-block masonry
prisms of full-sized block up to 12" (304 mm) HCM-4000P Series Prism Machines Platen Carrier Brackets
Ship wt. 1,700 lbs. (771kg)
wide. The Carrier Bracket is used for safer removal and
See Page 177 for models and ordering information. mounting of the block platen assembly inside the
HCM-5000B Series Block Machines load frame, and should be considered a must have
• Tests blocks, masonry prisms, pavers and retain- Ship wt. 2700 lbs. (1224kg)
ing wall units option when testing masonry units.
See Page 177 for models and ordering information.
• 400,000 to 800,000 (1,780 to 3,559kN) testing The brackets heavy-duty arm is mounted on the
HCM-5000P Series Prism Machines
range with accuracy of ±5% of indicated load Ship wt. 2700 lbs. (1224kg)
rear left hand corner of the load frame and piv-
ots on two hinged joints, allowing the complete
• Standard configuration includes platens for
assembly to rotate smoothly into and out of the
testing 6" x 12" (150 x 300mm) cylinders
load frame. When not in use, platen and arm are
• Draw rod is included for safer, easier and faster conveniently stored on rear of machine.
changing of test platens and spacers
HCM-4000 Carrier Bracket HCM-0190SP
Ship wt. 120 lbs. (54.4kg)

HCM-5000 Carrier Bracket HCM-0190P

Ship wt. 155 lbs. (70.3kg)
Masonry Series Compression Machines
Specification HCM-4000B HCM-4000P HCM-5000B HCM-5000P
Vertical Opening 18.375" (467mm) 26.750" (679mm) 18.375" (467mm) 26.750" (679mm)
Horizontal Opening 13.312" (338mm) 13.312" (338mm) 14" (356mm) 14" (356mm)
Piston Stroke 2.5" (63.5mm) 2.5" (63.5mm) 2.5" (63.5mm) 2.5" (63.5mm)
Lower Platen, Dim. 12" x 16" (305 x 407mm) 12" x 16" (305 x 407mm) 13" x 16" (330 x 407mm) 13" x 16" (330 x 407mm)
Upper Platen, Dia. 6.5" (165mm) 6.5" (165mm) 6.5" (165mm) 6.5" (165mm)
Oil Reservoir Cap. 2 gal (7.6 liter) 2 gal (7.6 liter) 2 gal (7.6 liter) 2 gal (7.6 liter)
Overall Width 39.875" (1013mm) 39.875" (1013mm) 30" (762mm) 30" (762mm)
Overall Depth 20" (508mm) 20" (508mm) 23.75" (603mm) 23.75" (603mm)
Overall Height 63.625" (1616mm) 71.625" (1819mm) 63.625" (1540mm) 68.875" (1749mm)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 177
CONCRETE Compression Testing

HCM-0101 HCM-0113 HCM-0112A HCM-0107P HCM-0119A

Cylinder Platens 2" (50mm) Cube Platen Test Sets Masonry Platens
ASTM C39, AASHTO T-22 ASTM C109, C1604, C39, AASHTO T-22, T-106 ASTM C140, C1314 for HCM-0107P Only!
Used when testing 6" (152 mm) or 4" (101 mm) Used for testing 2" (50 mm) cubes and 3" (76 Masonry platens feature large diameter spheri-
diameter concrete cylinders in compression. Platen mm) diameter cylinders and cores in compression. cal disk and seat assemblies, and platen bearing
is manufactured from steel with all components Cube test set consists of a 3.125" (80mm) diam- surface plane to .001" (.025 mm) in any 6" (152
plated for corrosion resistance. eter, spherically-seated upper platen assembly mm) direction, through hardened to HRC 60 and
Its bearing platen is 6.5" (165 mm) in diameter, and a lower pedestal with a 2.83" (72mm) diame- plated for wear and corrosion resistance. The bear-
through-hardened to HRC 55 or greater, plane to ter bearing block surface used for positioning the ing block is held securely in its seat assembly by a
.0005" (.02 mm), has scribed concentric circles, cube sample at the correct height for testing. series of heavy duty springs and safety links which
and is hard nickel plated for wear resistance. The bearing blocks of the upper platen are hard- allow it to rotate freely and seat under load.
Note: An optional spacer is required for testing 4" ened to 60 HRC and plane to .0005" (.01 mm) and The HCM-0106 and HCM-0106.3 are used to test
(101 mm) diameter cylinders. hard plated for corrosion resistance. masonry units up to 8" (203 mm) wide. Both items
The upper bearing block is closely held in its spher- are supplied with an 8" wide x 16" long bottom
Machines HCM-2500 HCM-3000 ical seat, but is free to tilt in any direction and bearing plate through-hardened to HRC 60 and
Platen HCM-0101 HCM-0104 seat securely under load. The bearing blocks are plated for corrosion resistance.

Machines HCM-4000 HCM-5000 removable and replaceable. The HCM-0107P can be used to test masonry units
The platen is easily installed in the upper cross- up to 12" (305 mm) wide.
Platen HCM-0101 HCM-0101
head of the load frame and is securely held in place Machines HCM-2500 HCM-3000
Cylinder Platens see chart above by either the holding stem, hex bolt or draw rod
Ship wt. 1078 lbs. (488.7kg) Platen HCM-0106 HCM-0106.3
system.
Machines HCM-4000 HCM-5000
Spacers are required for testing 3" diameter cyl-
6" (152mm) Cube Platen Test Sets inders or cores. Cube pedestal is not used when Platen HCM-0107P HCM-0107P
ASTM C109, C1604, C39, AASHTO T-22, T-106 testing cylinders or cores.
Used for testing 6" (152 mm) concrete cubes and Masonry Platen see chart above
Machines HCM-0030 HCM-2500 Ship wt. 135 lbs. (61.2kg)
cylinders in compression.
Cube test set consists of a 6.5" (165mm) square, Set HCM-0112SA HCM-0112A Flexural Beam Attachment
spherically-seated upper platen assembly. Platen, Upper HCM-0023L HCM-0023L ASTM C78, C293, AASHTO T-97, T-177
The platen bearing blocks are through-hardened Platen, Lower HCM-0022SA HCM-0022A Used to determine the modulus of rupture of cen-
to HRC 55 or greater, plane to .0005" (.012 mm) ter or third-point beams with a depth of 6" (150
Machines HCM-3000 HCM-4000
in any 6" (152 mm) area, has concentric circles for mm). The upper heads load bearing blocks are
Set HCM-0114A HCM-0115A easily changed for either a center or third-point
easier centering of cylinders and is hard nickel-
plated for wear and corrosion resistance. Platen, Upper HCM-0023N HCM-0023 testing configuration. Bottom support blocks are
set in the lower support channel with a fixed 18"
Kit includes; spherical seated platen assembly Platen, Lower HCM-0022A HCM-0022A
(457 mm) span length.
and spacer. Note: A 6.5" (152 mm) square lower Machines HCM-5000
platen is supplied with MA-0113 cube set for use Bearing blocks are spring-loaded to hold them in
Set HCM-0115A contact with the pivot balls and rod, as required by
in HCM-2500 series machines
Platen, Upper HCM-0023 ASTM specifications.
Machines HCM-2500 HCM-3000
Platen, Lower HCM-0022A Machines HCM-2500 HCM-3000
Set HCM-0113 HCM-0111
Attachment HCM-0119A HCM-0117A
2" (50mm) Cube Platen Set see chart above
Platen, Upper HCM-0113X HCM-0111X Ship wt. 14lbs. (6.3kg) Machines HCM-4000 HCM-5000
Machines HCM-4000 HCM-5000
Attachment HCM-0119A HCM-0119A
Set HCM-0116 HCM-0116
Machines HCM-0030
Platen, Upper HCM-0116X HCM-0116X
Attachment HCM-0119A
6" (152mm) Cube Platen Set see chart above Flexural Beam Attachment see chart above
2500 Platen Ship wt. 38 lbs. (17.2kg) Ship wt.134 lbs. (60.7kg)
3000 Platen Ship wt. 116 lbs. (52.6kg)
4000 & 5000 Platen Ship wt. 100 lbs. (45.3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

178
Compression Testing CONCRETE

HCM-HP4014

HCM-0120 HCM-00127 HCM-0135

Cylinder Splitting Set Brick Platen Assembly Selector Valve

ASTM C496, AASHTO T-198 ASTM C39, C67, AASHTO T-67 The HCM-HP4014 selector valve accessory provides
The cylinder splitting head has a bearing contact The brick platen assembly is designed for testing switching capabilities between two separate compres-
area of 12" (304 mm) long by 2" (50 mm) wide, its brick in compression. The set consists of an upper sion frames when using a single pump for both frames.
surface is machined plane to .001" (.025 mm) and spherically-seated platen and a lower platen. The This valve can be used with either the HCM-5080 or
has a scribed center line of the face of the bar for upper platen is 6.5" (165mm) wide x 8" (203mm) HCM-5070 Humboldt automatic controllers or our
easier centering of test samples. long x 1.875" (48mm) thick, through-hardened to HCM-5090.3F digital indicator.
Note: A lower bearing plate 12.5" (317 mm) long HRC 60 or better, plane to .0005" (.02mm) and
Cylinder Loading Shelf HCM-HP4014
by 7" (178 mm) wide is supplied with HCM-0120 hard-plated for wear and corrosion resistance. The Ship wt. 7lbs. (3.2kg)
Splitting Test Set for use in HCM-2500 series platen is closely held in its spherical seat, but in
machines. such a manner as to allow the contact platen to tilt
freely and seat securely under load.
Machines HCM-2500 HCM-3000
The bottom bearing block is used beneath the test
Splitting Set HCM-0120 HCM-0124 specimen to minimize wear on the lower machine
Machines HCM-4000 HCM-5000 platen. It is 8" (203mmm) long x 6.5" (165mm)
wide x 1.875" (48mm) thick, through-hardened to
Splitting Set HCM-0123 HCM-0123
HRC 60 or greater, plane to .0005" (.02mm) and is
Cylinder Splitting Set see chart above hard-plated for wear and corrosion resistance.
HCM-0120 Ship wt. 173 lbs. (69kg)
Optional spacers are required to close the vertical
HCM-0123, HCM-0124 Ship wt. 240 lbs. (108.8kg)
opening of the machine when testing bricks.
Spacers for Platen Adjustment
Brick Platen Assembly HCM-00127
Spacers are used with test platens to adjust the ver-
Ship wt. 100 lbs. (45kg)
tical working clearance height inside a machines
Upper Brick Platen Only HCM-0015
load frame, for testing samples of various types Ship wt. 100 lbs. (45kg) HCM-0718
and sizes to prevent over-extension of the load
Cylinder Loading Shelf
frames piston. AbleCable
Auxiliary Cylinder Loading Shelf is available for use
They are manufactured from steel and machined Serial/USB cable, which allows you to transfer load
with HCM-2500 Series machines.
plane on both ends to maintain a parallel align- vs. time graph with test date, I.D. number and test
ment between spacers and test platens. Spacers Cylinder Loading Shelf HCM-0135 data directly into a spread sheet program. This
Ship wt. 40lbs. (18.4kg)
are painted for corrosion resistance. Spacers are allows the user to transfer data from an individual
available in four model types; three model types test to a spread sheet to create a X-Y load vs. time
for mounting against the machines upper cross- graph with the graph wizard. Requires user to set
head by the holding stem, socket head bolt or initial column headings. For use with the i7 digital
draw rod methods, and one model type that sits on indicator only.
the machines lower crosshead used with a bearing AbleCable HCM-0718
platen. Ship wt. 0.4lbs. (0.181g)

Spacers see chart below AbleCable Extension, 25' (7.6m) HCM-0707.25

Ship wt. 5lbs. (2.2kg)

Platens and Spacers for Concrete Compression Frames

Cylinders Item HCM-2500 HCM-3000 HCM-4000 HCM-5000 Ship Wgt.
Platen Supplied Supplied Supplied Supplied 39 lb/17.7kg
4 x 8 in. 34.4 lb
Spacer HCM-0612 HCM-0662 HCM-0653 HCM-0653
/15.6kg
Platen HCM-0023L HCM-0023N HCM-0023 HCM-0023 45 lb/20.1kg
3 x 6 in.
Spacer HCM-0612 HCM-0661 HCM-0654 HCM-0654 35 lb/15.8kg
Platen HCM-0023L HCM-0023N NR NR 13 lb/5.8kg
2 x 4 in.
Spacer HCM-0615 HCM-0666 NR NR 17 lb/3.1kg
Supplied: Item comes with machine, NR: Not required

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 179
CONCRETE Compression Testing

H-2912L H-2911 H-2918D

Compressometer / Dial Dial Digital

LSCT Compressometers LSCT
Extensometers Gauge Gauge Indicator
6” x 12” (152 x 305mm) cylinders H-2912 H-2912L 6” x 12” (152 x 305mm) cylinders H-2911 H-2911D H-2911L
4” x 8” (102 x 203mm) cylinders H-2917 H-2917L 4” x 8” (102 x 203mm) cylinders H-2916 H-2916D H-2916L
3” x 6” (76 x 152mm) cylinders H-2919 H-2919L 3” x 6” (76 x 152mm) cylinders H-2918 H-2918D H-2918L

Compressometer-Extensometers
ASTM C469
Data Acquisition Upgrade for Existing Compression Machines
and Compressometer-Extensometer Testing
Compressometer-extensometers are used to
determine Poisson's ratio and Young's modu- Looking to upgrade your existing manually-oper-
lus during a compression test. This device con- ated compression machine or add compressome-
tains a third, center yoke with a hinge dividing ter/extensomenter testing capabilities to it? Now
it into two equal segments. The middle yoke is you can easily upgrade your frame with Hum-
hinged to permit rotation of the two segments boldt‘s HCM-5090 Digital Indicator. The HCM-
of the yoke in the horizontal plane. Indicator 5090's four, independent data acquisition channels
gives deformation readings. Second indicator is provide you with enough options to control all your
furnished for compressometer section. Unit mea- data needs with one digital indicator.
sures changes in length and diameter. All H-2900 A typical setup would provide the logging of Load,
series compressometers may be ordered with dial Stress and Rate from one compression machine in
gauges, digital indicators or strain transducers, see Channel One. Channels Two and Three would pro-
charts above. Digital indicators and LSCT models vide inputs for measuring displacement— allowing
can be used with data acquisition systems through you to perform extensometer and compressometer HCM-5090.3F
the use of our miniloggers, see right. testing. Channel Four would provide another input
Compressometer-Extensometers see chart above for logging Load, Stress and Rate, perfect for an
Ship wt. 9.6 lbs. (4.3kg) additional load frame set up for someting like flex-
Compressometers ural testing or cubes. All this information can be
ASTM C469 simultaneously tracked by the HCM-5090.3F. For
more information on the HCM-5090.3F, see pages
The compressometer is used for evaluating the
170-171. If you are interested in an automatic
chord modulus of elasticity (Young's modulus) of
solution upgrade, you should look at the HCM-
concrete cylinders while undergoing compression
5080 and HCM-5070 automatic controllers on
testing. The compressometer includes two, cast-alu-
pages 170-171.
minum alloy yokes, mounting and central points, HM-2310.04
stainless steel control rods. Models are available Digital Indicator, 120/220V 50/60Hz HCM-5090.3F
Ship wt. 6lbs. (2.7kg)
with a dial gauge— with a range of 0.2" (5.08mm)
and minimum graduations of .0001 (.0025mm), as Strain Transducer
well as with a digital indicator or a LSCT transducer. ASTM C469
Digital indicators and LSCT models can be used Strain transducer: 0.4" (10mm)
with data acquisition systems through the use of our Strain Transducer HM-2310.04
miniloggers, see right. Ship wt. 1lbs. (453g)

Compressometers see chart above Pressure Transducer HM-4177

Ship wt. 10 lbs. (4.5kg) Pressure transducer: 10,000 psi with plug for
HCM-5090.3F
Pressure Transducer HM-4177
Ship wt. 1lbs. (453g)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

180
Flexural Compression Machines CONCRETE

HCM-1143

HCM-1142
HCM-5070
Specification HCM-1142
Capacity (100kN) Specification HCM-1143 HCM-1144
Piston Stroke 2.95" (75mm) Capacity (200kN) (300kN)
Test Chamber Height 7.00" (180mm) Piston Stroke 1.96" (50mm) 8.66" (220mm)
Bending Roller Length 6.30" (160mm) Bending Roller Length optional 20.10" (510mm)
Bending Roller Dia. 1.50" (38mm) Bending Roller Dia. 1.50 -0.78" (38-20mm) 1.6" (40mm)
Lower Roller Distance 29.50" (750mm) Lower Roller Distance 35.40" (900mm) 40.1" (1020mm)
Overall Width 33.00" (840mm) Overall Width 39.30" (1000mm) 26.40" (670mm)
Overall Depth 33.20" (845mm) Overall Depth 50.80" (1290mm) 53.90" (1370mm)
Overall Height 47.80" (1215mm) Overall Height 50.80" (1290mm) 87.00" (2210mm)

Flexural Series Compression Machines Choose the ”Fast Testing“ option and your compres- Features:
ASTM C78, C293; EN 12390-5,EN 1339, EN 1338 sion frame will run tests as fast as you can load your • Provide two channel inputs for load, which allows for
These Flexural Series machines can paired with beams while sequentially numbering each test auto- the control of two separate compression frames
the Humboldt Concrete Compression Frame and matically. Just click on the start button. The HCM-5070 • Provides two additional channel inputs for displace-
HCM-5070 Automatic Console Controller to pro- controller features a robust, reliable and cool-running ment, which allows performing extensometer and
vide an automated solution for testing standard 1hp pump, which works together with the controller compressometer testing
concrete beams. Frames support a hydraulic ram for full operational control. • 7", high-resolution color touch-screen display with
and upper platen sub-assembly incorporating a live readout, graphical and tabular display
The HCM-5070 controller‘s high-resolution, 7-inch,
spherical seating. The upper and lower platens will • Easy test setup, just choose the standard you wish
color, touch-screen provides accurate, precision frame
accept various specimen loading bearer, which are to test for and the controller will walk you through
operation, setup and calibration. Test setup is simple,
sold separately. the complete setup
just choose the ASTM standard you wish to use and
Flexural Machine, 100kN HCM-1142 the controller will quickly walk you through the setup • Pre-programmed to run the following tests:
Flexural Machine, 200kN HCM-1143 procedure. Calibration is also easy with these control- ASTM C39, ASTM C78, ASTM C293, ASTM C469,
Flexural Machine, 300kN HCM-1144 lers, allowing you to use from 1 to 10 points to cali- ASTM C496, ASTM C1019, ASTM C109/C109M,
brate the machine in any increment you choose. It also BS EN 12390-3, EN 12390-5,EN 1339, EN 1338
These three Flexural machines are controlled with provides an accurate motor-control knob, which let's • Integral storage within the controller of up to 1000
Humboldt's HCM-5070 Automatic controller, you dial in precise loads for calibration. tests and 3000 points per test
which is designed to make fast work of testing a variety
Humboldt‘s controllers provide two channel inputs for • Simple, Fast and accurate machine calibration with
of standard beams.
load, which allows for the control of two separate com- accurate, motor-control knob
The HCM-5070 Console controller provides an easy-
pression frames when using the HCM-HP4014 selector Humboldt Auto Console Controller HCM-5070
to-use automated testing work flow— just choose the
valve accessory. The controller also provides two addi- Humboldt Auto Console Controller HCM-5070.4F
test standard you wish to run from the menu and the Ship wt. 200 lbs. (91kg)
tional channel inputs for displacement, which provides
controller will quickly guide you through the setup.
an easy solution for determining Poisson's ration and
Young's modulus testing.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 181
CONCRETE Rebound Test Hammers

H-2987H

H-2971STN
H-2975 H-2994, H-2992 H-2971U

Concrete Rebound Hammers of the test is 1.6 ft-lbs (2.207 Nm). The (type N) webtool. This web-based reporting capability pro-
ASTM C805, D5873; BS 1881: Part 202; Schmidt hammer is pressed against the concrete vides you and others at different locations to access
ISOIDIS8045; ENV 206; IGJ/T 23-2001 structure and the rebound values are displayed on report data. It provides extensive reporting abilities,
Concrete rebound hammers are used to determine a mechanical sliding scale. These values can then including custom curves and ones to ASTM/EN stan-
in-place strength of concrete. All these models be correlated to compressive strength by using the dards. Reports and data are available in both .pdf or
accurately measure compressive strength, which conversion table chart affixed to the hammer. The .csv file formats for use by computers. A bluetooth
directly determines the load-bearing capacity and original Schmidt hammer is known for its durability printer is also available for on-site printing of mobile
durability of concrete structures. All models also and accuracy. App reports and the new Schmidt Live also provides
include a grinding stone, carrying case and instruc- Schmidt Hammer, Type N H-2975 audio output of results, if desired. The Schmidt Live
tion booklet with conversion charts. Schmidt Hammer, Type N (N/mm2) H-2975M runs on AAA batteries.
Ship wt. 4.7lbs. (2.1kg)
Humboldt Rebound Hammer Classic Schmidt Live, Type N with App H-2994
Humboldt's concrete rebound hammer provides a Schmidt Hammer, Type L Classic Schmidt Live, Type N with Printer H-2994P
reliable, yet economical, alternative to the original The H-2975L hammer is designed for testing thin- Classic Schmidt Live, Type L with App H-2992
Schmidt hammer. It is designed for testing concrete walled structural components with a thickness of Classic Schmidt Live, Type L with Printer H-2992P
less than 4" (100mm) or rock cores. This hammer Ship wt. 4.7lbs. (2.1kg)
4" (100mm) or more in thickness with a maximum
particle size less than or equal to 1.25" (32mm), features an impact of 0.74 Nm, which is 1/3 less Silver Schmidt Hammer
providing a quick and simple test for obtaining an energy than type N hammers and uses a N/mm2 The Proceq Silver Schmidt test hammer has been
immediate indication of concrete strength in var- scale. redesigned to provide unmatched accuracy,
ious parts of a structure. The Humboldt rebound Schmidt Hammer, Type L (N/mm2) H-2975LM repeatability and easy, intuitive operation. The
hammer covers a compressive strength range of Ship wt. 4.8lbs. (2.2kg) Silver Schmidt features quicker and more accurate
1,450 to 9,000 psi (10 to 62 MPa). To operate, the Classic Schmidt Live testing while addressing the previous insufficien-
rebound hammer is pressed against the concrete The New Classic Schmidt® Live concrete rebound cies of the traditional hammers. With the Silver
structure and the rebound values are displayed on hammer is designed for strength determinations Schmidt impact direction no longer has an impact
a mechanical sliding scale. These values can then in R values for concrete and rock applications. This on values; values are not affected by internal fric-
be correlated to compressive strength by using hammer provides both analog and digital functions. tion of the hammer operation, and, loss of accu-
the conversion table chart affixed to the hammer. This allows you to take readings using the integral racy because of seal problems is not an issue.
It includes a grinding stone, a cloth carrying case, scale or use the digital functions, which offer sev- In use, the Silver Schmidt eliminates cocking the
instruction booklet and conversion charts. eral enhanced capabilities. It is designed for testing hammer for each blow and recording the results,
Humboldt Test Hammer, Type N H-2987H concrete within a compressive strength range of the Silver Schmidt allows you to do all your test
Ship wt. 4lbs. (1.8kg) 1,450 to 10,152 psi (10 to 70 N/mm2) and impact blows in rapid succession, while it records the
Schmidt Hammer, Type N energy of the test is 1.6 ft-lbs (2.207 Nm). The results. These results can then be reviewed. Intu-
The original Schmidt® hammer, type N, is designed Schmidt hammer is pressed against the concrete itive User Interface is language independent
for non-destructive testing of concrete items 4" structure and the rebound values are displayed on through the use of easy-to-understand icons. The
(100mm) or more in thickness, or concrete with a a mechanical sliding scale, as well as the digital interface menu structure is similar to a mobile
maximum particle size less than or equal to 1.25" readout on the top of the hammer. phone’s. Practically every command can be acti-
(32mm). It is designed for testing concrete within a The hammer's digital capabilities increase pro- vated either directly or via no more than 2 consec-
compressive strength range of 1,450 to 10,152 psi ductivity by providing faster operation and great utive steps.
(10 to 70 N/mm2) and impact energy improvements of the time needed for taking read- All data is automatically saved and may be
ings. A free, mobile App is available, which functions reviewed via the data list. The memory capacity
via bluetooth technology. The App provides geo-
location capabilities and access to a cloud-based

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

182
Rebound Test Hammers CONCRETE
Humboldt provides repair and
calibration services for concrete
rebound hammers, Call: 1.800.544.7220

11
H-2975.27 1
11
H-2972 21
20 12
12 21

13 20

13
23 6 23 22
8
H-2987H.7 4 22 6
8
H-2975.25
H-2975.25N 14 7
19
19
is dependent of the length of tests in a series, but 3
roughly 400 series with 10 readings each can be
accomplished with the Silver Schmidt. The Silver 16 4
Schmidt hammer includes these standard acces-
sories: battery charger with USB cable, data car- 14
14.1
rier with software, carrying strap, grinding stone,
10 17
chalk, documentation and carrying bag. Software 14
14.2
provided for performing firmware upgrades and
selecting presets only. 7 3
Silver Schmidt Hammer H-2971STN 16
Ship wt. 4.9lbs. (2.2kg) 15
Silver Schmidt Hammer w/ Hammerlink Software
Same as H-2971STN, but includes complete Ham- 18
17 10
merlink software. Hammerlink software features 9
15 9
include: extended memory usage; rapid unifor-
mity assessment with summary view; sorting of
data; user-defined conversion curves (polynomial 1 1
1
18
and exponential); user-defined statistical methods;
highlighting of mean, median and outliers; car- H-2987H Replacement Parts H-2975 Replacement Parts
bonation correction; print outs, and export to third Key Description Part# Key Description Part#
party software.
1 Impact Plunger H-2987.1 1 Impact Plunger H-2975.1
Silver Schmidt w/ Software H-2971U 3 Housing, complete H-2987.3 3 Housing, complete H-2975.3
Ship wt. 4.3lbs. (1.9kg)
4 Rider with Guide Rod H-2987.4 4 Rider with Guide Rod H-2975.4
Grinding Stone for Rebound Hammers 6 Push-button, complete H-2987.6 6 Push-button, complete H-2975.6
Replacement grinding stone for rebound hammers. 7 Hammer Guide Bar H-2987.7 7 Hammer Guide Bar H-2975.7
Grinding Stone H-2975.27 8 Guide Disk H-2987.8 8 Guide Disk H-2975.8
Ship wt. 0.9lbs. (0.4kg)
9 Cap H-2987.9 9 Cap H-2975.9
Calibration Anvil for Rebound Hammers 10 Two-part Ring H-2987.10 10 Two-part Ring H-2975.10
Calibration anvil ensures continued test accuracy. 11 Rear Cover H-2987.11 11 Rear Cover H-2975.11
For use with all test hammers. Hammers should
12 Compression Spring H-2987.12 12 Compression Spring H-2975.12
be periodically checked to determine correct
13 Pawl H-2987.13 13 Pawl H-2975.13
performance.
14 Hammer Mass H-2987.14 14 Hammer Mass H-2975.14
Calibration Anvil H-2972 15 Retaining Spring H-2987.15 15 Retaining Spring H-2975.15
Ship wt. 58bs. (26.3kg)
16 Impact Spring H-2987.16 16 Impact Spring H-2975.16
Conversion Chart Labels
17 Guide Sleeve H-2987.17 17 Guide Sleeve H-2975.17
Replacement conversion chart for rebound
18 Felt Washer H-2987.18 18 Felt Washer H-2975.18
hammers.
19 Acrylic Window H-2987.19 19 Acrylic Window H-2975.19
Conversion Chart Label (psi/MPa) H-2987H.7
20 Trip Screw H-2987.20 20 Trip Screw H-2975.20
Conversion Chart Label (psi) H-2975.25
21 Lock Nut H-2987.21 21 Lock Nut H-2975.21
Conversion Chart Label (N/mm2) H-2975.25N
Ship wt. 0.5lbs. (0.22kg) 22 Pin H-2987.22 22 Pin H-2975.22
23 Pawl Spring H-2987.23 23 Pawl Spring H-2975.23

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 183
CONCRETE Strength, Pull-Off

HC-2978

HC-2985
H-2978

Windsor HP Probe System Windsor HP Pin System With the DY-2 pull-off testers, the operator is able
ASTM C803; BS 1881 Measures the compressive strength of concrete, to provide a complete record of the pull-off test,
The Windsor HP probe system is used to evaluate mortar and brick in-situ, quickly, accurately. A proving that the test was carried out in accordance
the compressive strength of in-place concrete. non-explosive instrument, the Windsor Pin™ sys- with applicable standards.
This non-destructive test can be used on fresh tem uses a spring-loaded device to drive a steel Three versions are available, the HC-2985: 135
or mature concrete with equal effectiveness. The pin into the concrete or mortar. The depth of pene- - 1349 lbf (0.6 - 6kN) covers most common appli-
system features an electronic measuring device tration of the needle correlates to the compressive cations, while HC-2986: 360 - 3597 lbf (1.6 - 16kN)
for accuracy and efficiency. Three individual tests strength of the material under test. A removable provides increased accuracy for low-strength appli-
can be automatically averaged and displayed on chuck and a small pin size facilitate the testing of cations, and, the HC-2987: 360 - 562 - 5620 lbf (2.5
the LCD in compliance with ASTM procedures. The mortar joints; this is the only system for testing the - 25kN) can be used for very high strength applica-
data, together with time and date of the test can in-place strength of brick mortar joints. Pins are tions such as testing of fibre-reinforced polymers
be stored in the memory for uploading to a PC. not included, see below. bonded to concrete structures or testing the bond
Two probe and power load types are available: Windsor HP Pin System HC-2978 strength of repair and overlay materials. Disc set
silver probes are used for high performance con- Ship wt. 20lbs. (9kg)
is not included with this product and must be
crete with strengths up to 17,000 psi (110 MPa) and Steel Pins for Windsor Pin System ordered separately.
gold probes for test applications on concrete with Box of 40 pins. 135 - 1349 lbf (0.6 - 6kN) Tensile Force HC-2985
less than 3,000 psi (19.4 MPa) strength. The sys- Steel Pins for Windsor Pin System HC-2978.1 360 - 3597 lbf (1.6 - 16kN) Tensile Force HC-2986
tem consists of the drive unit, electronic measuring Ship wt. 2lbs. (0.9kg)
562 - 5620 lbf (2.5 - 25kN) Tensile Force HC-2987
device, templates, measuring caps, gauge plates Replacement Micrometer for Windsor Pin Ship wt. 16lbs. (7.2kg)
and carrying case. Probes are not included with Replacement Micrometer HC-2978.2
this product and must be ordered separately. Ship wt. 2lbs. (0.9kg) Pull-off Tester DY-2 Accessories
Windsor HP Probe System H-2978 Pull-off Tester, DY-2 Item Part No.
Ship wt. 30.6lbs. (13.8kg) ASTM C1583, D4541, D7234, D7522; BS 1881
50mm/M10 Disc Set, steel HC-2985.1
Windsor HP Probe Kits Part 207; EN 1542, 1015, 1348; ISO 4624
50mm/M10 Disc Set, Alum. HC-2985.2
Each certified probe kit includes 3 probes and 3 The quality of concrete repairs is determined by
matched, nickel-plated power loads. Silver probe the adhesive strength between the repair mate- 20mm/M10 Disc Set, Alum. HC-2985.3
kit is for natural stone or coarse aggregate (den- rial and the substrate. Pull-off testing is the most 50 x 50mm/M10 Disc Set, Alum. HC-2985.4
sity greater than 125 lbs/cu ft). Gold probe kit is widely used test method to assess bond strength. 40 x 40mm/M10 Disc Set, Alum. HC-2985.5
for lightweight aggregate (less than 125 lbs/cu ft The DY-2 family of automated pull-off testers cov-
density) Can not be shipped via air or ocean. 100mm/M10 – 3-Disc Set, Alum. HC-2985.6
ers the complete range of pull-off applications with
Windsor Silver Probe Kit H-2978.01 unmatched ease of operation and the ability to 100 x 100mm/M10 –3-Disc Set Alum. HC-2985.7
Windsor Gold Probe Kit H-2978.03 store a complete record of the test. The DY-2 with 75mm/M10 Disc Set, Alum. HC-2985.8
Ship wt. 0.4lbs. (0.1kg) its integrated feedback controlled motor provides
Draw Bolt, M10 Short HC-2985.9
a regulated load rate as specified by all standards,
thereby providing a fully automated test for the Draw Bolt, M8 Short HC-2985.10
most repeatable results. It is lightweight for easy Draw Bolt, M12 Short HC-2985.11
operation even on walls and overhead. Adapter Plate for Large Discs HC-2985.12
H-2978.01 The DY-2 pull-off testers are also unique, in that
Fixing Kit for vertical and
they record every single test parameter required HC-2985.13
overhead surfaces
by specifications:
• Test disc size;
• Maximum load applied;
• Automatic calculation of bond strength;
• Applied load rate with graphical record;
H-2978.03
• Time and date of the test;
• Complete time of test, and
• Failure mode.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

184
Bond Test, Pull-Off CONCRETE

HC-2988A

HC-2957U
HC-2957M
HC-2958
HC-2989

HC-2957D

Bond Test Kit with 25kN Gauge Mobile Network Signal) Compatible with Android Wireless App and Digital Gauge for Testers
ASTM D4541,D7234 or Apple-based devices such as smartphone/Tab- Revolutionary digital technology captures test
The bonding strengths of a wide and varied range let. Android system 4.4 onwards or Apple iOS 7 results using a mobile phone or tablet device,
of materials including concrete, screeds, repair and above is required. Data enabled SIM with allowing for instant visual graphs on-site for bond
mortars, epoxy resin coatings, laminates, plastics, email function required for dispatching reports. testing, including anchors & eyebolts. Test results
paints and enamels may be accurately determined The Bond Test Kit comes with a digital gauge that are produced in real time visual graphs for each
using this Bond Tester. Adequate direct tensile covers a range from 0 to 25kN. test. Can be used with most current bond testers
strength or bonding strength between two layers from most manufacturers. (Requires WiFi or Mobile
Bond Tester w/Digital Gauge (App) HC-2989
is important if repairs to concrete structures or Ship wt. 42lbs. (19kg) Network Signal) Compatible with Android or
additional overlays and screeding on existing con- Apple-based devices such as smartphone/Tablet.
Anchor Test Kit with 25kN Gauge
crete is to be structurally sound. The pull-off test Android system 4.4 onwards or Apple iOS 7 and
The Anchor Test Kit is designed for testing fixings,
as a means of projecting the compressive strength above is required. Data enabled SIM with email
fasteners and anchors. It consists of a mechanical
of concrete and other materials involves bonding function required for dispatching reports. Note:
screw arrangement acting through a hydraulic load
a circular steel disk to the surface by means of an Does not include bond tester or mobile device
cell, which measures the load applied to the fixing
epoxy resin adhesive. A controlled tensile force directly. The resulting load value is then indicated Wireless App & Digital Gauge for Testers HC-2958
is then applied to the disk, and as the strength of Ship wt. 5lbs. (2.26kg)
on the dial type analog gauge. This Kit features
the bond is greater than that of the material under the 25kN Gauge, to suit most applications. (Other
HC-2988 & HC-2989 Accessories
stress it will eventually fail in tension. From the gauges are available); threaded rods, studs and
area of the disk and the force applied at failure it slotted button adapters in 1/4", 3/8" and 7/8" Item Part No.
is possible to calculate a nominal tensile strength sizes and a calibration certificate. 50mm Hexagon extension legs HC-2988.1
for the material. The standard kit includes: 50mm
Anchor Test – 25kN Gauge, UNC Thread HC-2957U 75mm Hexagon extension legs HC-2988.2
of stroke, a 25kN gauge; 10 x 50 mm steel bond
Anchor Test – 25kN Gauge, Metric Thread HC-2957M 100mm Hexagon extension legs HC-2988.3
discs; 10 x 75 mm steel bond discs and a calibra- Ship wt. 25lbs. (11.3kg)
tion certificate Anchor Test Kit with Digital Gauge (Wireless App) 50mm Bond Disc HC-2988.50
Bond Test with 25kN Gauge HC-2988A The Anchor Test Kit is designed for testing fixings, 75mm Bond Disc HC-2988.75
Ship wt. 50lbs. (22.6kg) fasteners and anchors. It consists of a mechanical
5kN Gauge HC-2988.4
Bond Tester with Digital Gauge (Wireless App) screw arrangement acting through a hydraulic load
ASTM D4541,D7234 cell, which measures the load applied to the fixing 10kN Gauge HC-2988.5

This Bond Test Kit features a wireless, mobile App directly. The resulting load value is then indicated 20kN Gauge HC-2988.6
and digital gauge. Revolutionary digital technol- on the dial type analog gauge. This Kit features ta
ogy captures test results using a mobile phone digital gauge, to suit most applications; threaded HC-2958 Accessories
or tablet device, allowing for instant visual graphs rods, studs and slotted button adapters in 1/4", Item Part No.
on-site for bond testing, including anchors and 3/8" and 7/8" sizes and a calibration certificate.
1" Anchor test
eye-bolts. Test results are produced in real-time Anchor Test with Digital Gauge HC-2957D HC-2959.M100
Ship wt. 42lbs. (19kg)
connector
visual graphs for each test.
1.25" Anchor test
The Bond Tester enables engineers to confirm HC-2957 Series Accessories HC-2959.M125
connector
adequate direct tensile strength or bonding Item Part No. 0.875" Anchor test
strength between two layers after repairs. The HC-2959.M875
Ring Bolt Adapter HC-2957RBA.M12 connector
tensile load of up to 25kN is applied to the fix-
Threaded rod adapter Special size adapters available, please enquire.
ing mechanically and hydraulics are used to reg-
ister the load through an accurate analog gauge, (various sizes available, HC-2957TRA.XX
making the tester very reliable. (Requires WiFi or please call)
Threaded rod adapter (vari-
HC-2957TSA.XX
ous sizes available, please call)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 185
CONCRETE Ground Penetrating Radar

2000 MHz 2”/5 cm - Rebar layer

6”/15 cm - Concrete ends
1000 MHz
20”/51 cm - Sewer pipe

45”/1.14 m - Water pipe

HC-2976

GPR Antenna Types: Ideal

2000 MHz 1500 MHz 1000 MHz Quantum Mini Depth
Range:
0

1.5’/46 cm

3’/91 cm

4’/1.2 m

Quantum Mini Concrete Scanner Specifications Zircon MT 6 Rebar Locator

ASTM C803; BS 1881 ACI 318; BS 1881 Part 204
Radar Controller Computer
With the benefits of deep lower frequency 1000 Locate embedded metal before your drill bit or
MHz antenna and a high resolution 2000 MHz Processor: Multi-core Intel Atom saw blade does. This powerful dedicated metal
antenna in a compact form factor, the Quan- Radar interface: proprietary military connector scanning tool can locate metal up to 6 inches deep
tum Mini is suitable for ALL concrete scanning 32 GB Solid State Hard Drive in solid concrete.
applications. The MT6 locates both ferrous and non-ferrous
10.1 Inch daylight readable LCD Color display
The dual frequency Quantum Mini by US Radar is metal up to 6 inches (152 mm) deep in concrete
the only concrete scanning GPR you will ever need. Power Supply: 10.5-18V DC @ 25W and other non-metallic surfaces. It also differenti-
It features a 1000 MHz antenna for analyzing deep Operating System: Windows 7 Embedded ates between ferrous and non-ferrous metal tar-
structures and targets under slabs. It also features System Scan Modes gets and indicates the target depth in inches and
a 2000 MHz antenna for high resolution analysis centimeters.
Trigger Modes: Free run, timed interval, shaft
of fine targets. It is no longer necessary to have The MT 6 indicates when you are approaching a
encoder, manual
to choose antennas or find out afterwards that metal object with a large plus (+) sign on the dis-
the scan should have been done with a different Maximum Sampling Rate: 100 gigasamples
play. When the plus becomes a minus (-), you have
antenna. The Quantum Mini offers these benefits per second
crossed over the target and are now moving away.
in a compact, wireless form factor that is perfect for Nominal Sampling Rate: 650,000,000 samples Use to avoid rebar, cables, pipe, nails in reclaimed
scanning walls, floors, ceilings, etc. per second wood, nails/tacks in studs behind lath & plaster
All other concrete scanners on the market only Gain: 45dB hardware, 90 dB Software, 60 dB walls, electrical boxes and conduit, and more.
offer ONE frequency or the other. This means the Software Flat Gain The MT6 is the tool recommended by the My Safe
average user must sacrifice depth for high resolu-
Radar Head Electronics Specifications Florida Home Program to assist in hurricane loss
tion scales, or vice versa.
Sampling Interval: 10 ps-6.4 nsl mitigation.
With both 1000 and 2000 MHz antennas, you get Automatically differentiates between magnetic
the detail associated with high resolution, while Time Range Adjustment Interval: 10 ps
metal (such as rebar) and non-magnetic metal
also being able to see far beyond the concrete Pulse Repetition F re q u e n c y : 0.1-4 (such as copper pipe). Shows the depth of metal
slab. This ensures concrete can be properly laid MHz-adjustable from the surface in both inches and centimeters
and that a firm understanding of what lies under-
Sample per Trace: 2-8192, Adjustable Easy-to-read LCD screen pinpoints the location of
neath is achieved. Dual frequency gives users the
Effective Bandwidth (typ.): >4 GHz metal objects to the nearest 1⁄2 inch (13 mm) and
assurance of a job well done.
depth to the nearest inch (25 mm)
The Quantum Mini offers a variety of software in Stacking: Automatic
Helps map out the grid of metal through any non-
on-board and desktop configurations including: Transmitter
metallic construction material, including concrete,
• GPS Dual Frequency 1000 & 2000 MHz tile, and marble
• 3D
Zircon MT 6 Rebar Locator HC-2976
Quantum Mini Concrete Scanner HC-2975
• Google Earth Integration Ship wt. 25lbs (11.4kgs)
Ship wt. 3lbs (1.4kgs)

• Satellite Imaging Integration

• Report Generation
• and more!
The Quantum Mini is also compatible with a wide
variety of third party processing software packages.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

186
Rebar Location
ation
n CONCRETE

HC-2983A

HC-2982A

HC-2981A

Profoscope+ The Spot Probe is provided for areas with con- Multi-Line Scan provides multiple linear scans
ACI 318; BS 1881 Part 204 gested rebar arrangements and the unit automati- across the first layer of rebar over a rectangular
The Profoscope is a versatile, fully-integrated rebar cally detects inclined rebars area. Cover, diameter and signal strength spec-
detector and cover meter with a unique real-time The statistics and snapshot views allow compre- trum are shown in one view. Each line can be
rebar visualization, allowing the user to actually hensive review of the measured data directly on viewed individually in the Single- Line View. Color
“SEE” the location of the rebar beneath the con- the screen. The statistics view presents a graphi- classification can be used to show cover and rebar
crete surface to a maximum depth of 180 mm and cal overview of the distribution of cover measure- diameter settings and the signal strength spectrum
can determine rebar diameter to a depth of 64mm. ments. The snapshot view shows cover for each can be used for further evaluation.
This is coupled with rebar-proximity indicators and rebar with the diameter displayed as a number. Area Scan
optical and acoustical locating aids. Rebar diame- It also provides graphical display of measured val- The grid display of the Area Scan Mode allows a
ter can also be estimated within the specified test- ues and minimum cover set and easy inspection simplified view of the measured cover data. It is
ing range. The Profoscope combines these unique of the measured values directly on the screen. best suited for a combination with potential field
features in a compact, light device that allows the Settings can be changed before and after storage measurements and individual grid sizes can be
user to operate this rebar detector with one hand and stored files can be reopened to continue mea- selected.
making the task of locating rebars a simple and surements. Data can be exported to a PC via the The Profometer 650AI (HC-2984A) extends the
efficient process. In addition, the instrument can Profometer-Link software features of the Profometer 630AI further still with
record measurement data, manually or automati-
Profometer PM600 HC-2981A the unique Cross-Line Scan measuring mode and
cally. This increases testing efficiency on the con- Ship wt. 15lbs. (6.8kg) analysis functions. Full reporting features are avail-
struction site significantly. The included software
Profometer 630AI & 650AI able, as required on large investigation campaigns
tool allows post-processing or exporting of the
ACI 318; BS 1881 Part 204 where a comprehensive report is to be delivered
collected data
The sophisticated Profometer 630AI (HC-2982A to the client.
Profoscope+ HC-2983A
Ship wt. 6lbs (2.7kgs)
further enhances the application range of the The 2D Cross-Line Scan extends the Multi-Line
Profometer 600 with Single-Line, Multi-Line and Scan with the special functionality of combining
Profometer 600
Area Scan Modes, as well as an extensive choice scans in the X- and Y-directions and measuring
ACI 318; BS 1881 Part 204
of statistical views, increasing productivity for civil the rebars of the first and second layer typically
The Profometer 600 (HC-2981A ) is the ideal instru- engineers and inspection companies in charge of arranged in a rectangular mesh. The signal strength
ment for contractors who need to avoid damages assessing the conformity of concrete cover of a spectrum can be seen in addition to the cover and
to the reinforcement steel when drilling, coring or new structure (quality check and resistance assess- diameter. By changing the Offset- and Gain-slider
cutting. It additionally covers the needs of inspec- ment) or dealing with corrosion analysis on large positions the signal strength range and resolution
tion engineers to locate rebars and to assess con- elements. can be set and accordingly shown in a color spec-
crete cover values and rebar sizes for spot checks. trum, for example to display the first layer of rebar.
Single-Line Scan provides a linear scan of the cover
With the Locate Mode you can precisely detect the across the first layer of rebar over a long distance, Profometer PM630AI HC-2982A
rebar location and direction, as well as measure the with or without diameter measurement. The signal Profometer PM650AI HC-2984A
cover and the rebar diameter. curve allows the user to manually verify and confirm Ship wt. 15lbs. (6.8kg)

The Profometer 600 provides visual assistance for the rebar position, delivering improved resolution.
speed and signal strength control, as well as hav- The user can zoom in to scale according needs
ing settings directly accessible on the measure- while displaying the cover curve or signal strength
ment screen curve.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 187
CONCRETE Corrosion

HC-2873.2
HC-2873.3
HC-2873.4

HC-2873 HC-2873.6
HC-2873.7
(shown with electrode not included)
HC-2873.5

Profometer Corrosion • Create custom reports with exported graphs and

Profometer Corrosion Specifications
ASTM C876 charts
Voltage Measuring
The Profometer Corrosion is the most versatile • Housing is specially designed to be used on-site -1000 to +1000 mV
Range
corrosion analysis solution, based on the half-cell in harsh environments, including carrying strap,
method, in the market today. Coupled with the integrated stand and sunshield cover Voltage Resolution 1 mV
Profometer's unique wheel electrodes, this unit • High resolution color display Impedance 100 M1
provides the fastest and most efficient on-site test- Sampling Rate 900 Hz
• Battery lifetime of > 8h
ing available. And, as the direct successor to the
• 8 GB flash memory 7" color display
Canin, the Profometer Corrosion is compatible with Display
• Dual-core processor supporting diverse commu- 800 x 480 pixels
existing Canin and most third party electrodes.
nication and peripheral interfaces Internal 8 GB
In addition, the Profometer Corrosion can also Memory
• Future-proof investment through direct upgrade flash memory
be easily upgraded to include all the additional
possibilities for upcoming Profometer products Metric and imperial
capabilities of the Profometer 6 Cover Meter. This
Profometer Corrosion includes: Profometer touch- units and multi-lan-
results in having a future-proof, all-in-one solution Regional Settings
screen; interface box; battery charger; 82 ft. (25m) guage and timezone
for rebar assessment and corrosion analysis.
cable coil with clamp; USB cable; DVD with software; supported
The Profometer’s dual-core processor allows fast
documentation, carrying strap and case. Order Probe Power input 12 V +/-25% /1.5 A
data acquisition and real-time control over the
measurement procedure directly on site. Its rug- separately. Dimensions 250 x 162 x 62 mm
ged housing has been specially developed for Profometer Corrosion HC-2873 About 1525g
Ship wt. 15lbs (6.8kg) Weight (of display device)
testing in harsh environments. (incl. battery)
The high resolution and illustrative Profometer Battery 3.6 V, 14 Ah
Profometer Corrosion Accessories
touchscreen enables high productivity with 2D
> 8h (in standard
grid views, an assisted workflow and on-site post Rod Electrode HC-2873.2 Battery lifetime
operating mode)
processing of the measured data. Together with One-Wheel Electrode HC-2873.3
< 95% RH, non
the included PC software it allows best possible Humidity
Four-Wheel Electrode HC-2873.4 condensing
analysis of the statistical data with efficient custom
reporting. Telescopic Extension 5.6ft. Operating temperature -10°C to +50°C
HC-2873.5
(1.7m) & 10ft. (3m) cable
Features Include: Touchscreen IP54,
Spare Battery HC-2873.6 IP Classification
universal probe IP 67
• Intuitive user-friendly interface for data acquisition
Quick Charger HC-2873.7
• Optimized workflow for both rod and wheel
measurements Anti-glare Protection Film HC-2873.8

• Customizable text can be entered for any specific Upgrade kit to Profometer
HC-2783.1
locations 600 Cover Meter

• Flexible features enable the mapping of any Software Upgrade from

irregular geometry Profometer 600 to HC-2874
Profometer 630
• Improved digital filtering to remove the effect of
external noise (civil and industrial power sources) Software Upgrade from
Profometer 630 to HC-2875
• Profometer Link PC software for data analysis,
Profometer 650
combined data evaluation and reporting on any
third party software

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

188
Corrosion CONCRETE

H-2872

HG-9047
HG-9036

iCORE™ CorMap Rebar Corrosion Mapping System Applications:

Giatec ICOR™ is a unique non-destructive testing ASTM C876; BS 1881 Part 201 • Concrete’s ability to resist chloride ion penetra-
tool for detailed detection and evaluation of corrosion The CorMap is a simple and economical instru- tion (ASTM C1202, AASHTO T277)
in reinforced concrete structures without the need ment for use in identifying areas of probable rebar • Bulk electrical conductivity of concrete
to have an electrical connection to the rebar. iCOR is corrosion. The system consists of the voltmeter, (ASTM C1760)
equipped with high-precision sensors to measure: two electrode extensions, reference electrode with
• Performance-based quality control of concrete
• corrosion potential mapping of rebar copper sulfate reservoir, copper sulfate, wetting
• Estimation of chloride diffusion coefficient
• corrosion rate mapping of rebar agent reservoir, dispensing sponge, 250 ft. (80m)
of concrete
cable reel, and a heavy-duty carrying case. In oper-
• real In-situ electrical resistivity of concrete
ation, the high impedance voltmeter is connected • Estimation of chloride migration coefficient
• ambient temp. and relative humidity of rebar of concrete
between the reinforcing steel and the reference
• on-site assessment of concrete durability electrode on the concrete surface where a mea- • Estimation of the remaining life of concrete
iCOR utilizes wireless technology to transmit data surement can be made for the half-cell potential. structures
to a tablet, where data can be stored, analyzed and This measurement is then used to determine the • Service life design of concrete structures
visualized. Moreover, the tablet app offers a pow- probability of corrosion activity. By testing at a Perma2™ unit includes complete set of test cells,
erful post-processing tool and an easy way to share fixed distance apart, a grid of half-cell potentials Temperature sensors, test cables, power cord,
the results with other team members. iCOR can can be developed and areas delineated. USB cable, user manual, communication software,
significantly save time, human resources and cost CorMap Rebar Corrosion Mapping System H-2872 gauge vacuum pump assembly, desiccator assem-
in the condition assessment of concrete structures. Ship wt. 24lbs. (10.8kg)
bly, PC software and USB connection.
iCOR employs a complex electrical circuit model Copper Sulfate, 8.5 oz. (400ml) Container Perma2™ Complete,
for predicting different properties of concrete
For use with the CorMap mapping system. 120V 60Hz HG-9036
materials, and steel reinforcement. An advanced
Copper Sulfate, 8.5 oz. (400ml) H-2872.1 220V 50/60Hz HG-9036.4F
mathematical algorithm is implemented in the core Ship wt. 125 lbs. (56.6 kg.)
Ship wt. 1.6lbs. (.7kg)
software of the device. This software processor is
Giatec Perma2™ Rapid Chloride Permeability Perma2™ less Pump and Desiccator,
responsible for the analysis of certain character-
ASTM C1202. C1740; AASHTO T277 120/220V 50/60Hz HG-9020.3F
istics of reinforced concrete structure such as the Ship wt. 40 lbs. (18.1 kg.)
polarization resistance of embedded reinforce- Perma2™ is a laboratory test device for measur-
ment and the “real” electrical resistivity of con- ing the electrical resistance of concrete against the
crete. Includes: ICOR measuring device;, measure- penetration of chloride (RCPT) according to the
ment cable; charging cable; table charging cable; standard methods such as ASTM C1202, AASHTO Perma2™ Accessories / Replacement Parts
(3) contact sponges (half cell); (12) contact sponges T277 and ASTM C1760. The measurement data Perma2™ Device,
HG-9044.3F
(corrosion) electrode storage solution; conductive derived from this test method can be used to esti- 110/220 50/60Hz
gel; spray bottle; case; data recording app; tablet mate the chloride diffusion coefficient of concrete Perma2™ Test Cell HG-9021
and carrying support, tablet charger and verifica- in service life predictions and structure design, as
Stainless Steel Mesh - Pair HG-9027
tion kits; well as durability-based quality control of concrete.
Perma2™ is electrically certified for rapid chloride Sample Prep Package,
iCOR™ Specifications HG-9042
penetrability testing in concrete laboratories and is 115V 60Hz
Testing Time 3 to 15 seconds the only RCPT device that meets the specifications Sample Prep Package,
Corrosion Rate 0 ~ 300 μm / year of ASTM and AASHTO specifications. HG-9042.4F
230V 50/60Hz
Perma2™ provides an easy-to-use, stand-alone
Corrosion Potential +200 to -800 mV / CSE Rubber Gasket Cast - Pair, 4"
testing device, which is accurate to ±0.1mA. It can HG-9028
(100mmm) Dia. .
Electrical Resistivity 0 ~ 10,000 1 • m test up to 4 samples at a time with a flexible log-
ging time of 1-10 minutes depending on test and Rubber Gasket Core -
Operating Temp. 32 to 113°F (0 ~ 45°C) HG-9039
sample parameters. It also features automatic tem- Pair 3.75" (95mm) Dia
Operating Humidity 20~ 90% RH perature control and customizable setups Test Cable Set HG-9022
Dimensions 250 x 70mm Temperature Sensor HG-9023
Weight 900g

Giatec iCOR™ Essential Pkg. HG-9047

Ship wt. 15lbs (6.8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 189
CONCRETE Corrosion, Ultrasonic

H-2874
H-2877.1

H-2877
HC-6390

H-2878

The Chlorimeter Chloride Test System ASR Detect Ultrasonic Pulse Velocity Tester
A field kit for the determination of chloride ion ASR Detect™ is both a practical and a scientific ASTM C597; BS1881:203; EN 12504
content in concrete, fresh cement, masonry, most tool. Its principal application is analyzing existing Used to determine the presence of faults, voids,
other construction materials, and water. The deter- concrete structures. By identifying alkali silica dete- cracks, etc. in in-situ or precast concrete and for
mination of the chloride ion concentration in con- rioration in its earliest stages, the ASR Detect facil- long-term monitoring of structures subject to
crete is essential in assessing the need for mainte- itates the problem being identified when remedia- environmental conditions. Gives data concerning
nance on, for example, bridge decks and parking tion techniques can be applied; for example, treat- the homogeneity of the concrete, by generating
structures. The test can also be used to ensure that ing the concrete with a lithium-bearing solution to pulses of sound into the concrete and measuring
materials used in new construction are free from inhibit further deterioration. Where deterioration is the time the sound takes to travel from the trans-
potentially harmful chloride ion levels. The Chlo- advanced, ASR detect provides a clear picture of mitter probe to the receiver probe through the
rimeter produces results on-site, within minutes the extent and depth of the damage. material. Measuring range: 0 - 3000 μs - accuracy
that are accurate and comparable to expensive As a scientific tool, ASR detect can be applied to +/- 0,1 μs
laboratory tests. With this method, the concentra- improving the understanding of where, how and • Selection of the ultrasonic pulse amplitude
tion of acid soluble chlorides is measured. In most why ASR occurs. That understanding is basic to adjustable from 250 to 1000 V
cases, this is equivalent to total chloride concentra- developing ASR preventatives that allow high-al- • Measurement of the required time by the ultra-
tion. It measures the electrochemical reaction of a kali cements or poor-quality aggregates to be used sonic pulse to go through the tested material.
weighted sample placed in an extraction liquid. It in concrete mixes without risking the development • Single or continuous acquisition mode with
automatically shows a temperature compensated of ASR. automatic or manual saving.
reading of percent of chlorides on its digital dis- To identify alkali silica reaction (ASR) in concrete, • Calibration of a defined time value.
play. A wide range— from 0.002 to 2% chloride by two reagents are applied to the broken surface of • Capacity of data acquisition, processing and fil-
weight— is covered. a concrete core and the excess rinsed off. On con- ing of the test data up to 30.000 samples.
Kit does not include required hand drill or taminated concrete, the resultant stains reveal the • Interface mini USB for PC connection.
extraction and calibration liquids, which can be presence of ASR. The stains also reveal the extent • Two outlets for connection to the oscilloscope.
ordered below. of the ASR in the concrete and indicate the stage
Includes (2) 55kHz probes with cables; calibration
Chlorimeter Chloride Test System H-2877 of ASR progression. Yellow indicates that degra-
rod and paste; rechargeable battery pack and case.
Ship wt 14lbs. (6.3kg) dation has begun; pink warns that degradation is
Ultrasonic Pulse Velocity Tester HC-6390
Extraction and Calibration Liquid, small kit advancing. Ship wt 3lbs. (1.6kg)
Pack of 12 jars, extraction liquid and calibration ASR Detect H-2878
liquid Ship wt 10lbs. (4.5kg)

Extraction and Calibration Liquid, Small H-2877.1 Carbo Detect Accessories for HC-6390
Ship wt 0.5lb. (0.2kg) Carbo Detect™ is a simple colored dye field test
55 kHz Transmitting/receiving
Extraction and Calibration Liquid, large kit for detecting carbonation. The single reagent is HC-6390.1
replacement probes
Pack of 100 jars, extraction liquid and 20 jars of cal- sprayed on the surface to be checked. The reagent
will change to pink in uncarbonated concrete and Exponential 150 kHz
ibration liquid. HC-6390.2
remain colorless when sprayed on carbonated Transmitting/receiving probes
Extraction and Calibration Liquid, Large H-2877.2 concrete.
Ship wt 5lb. (2.2kg)
Exponential 55 kHz
HC-6390.3
Carbo Detect H-2874 Transmitting/receiving probes
Ship wt 1.3lbs. (.6kg)
Exponential 24 kHz
HC-6390.4
Transmitting/receiving probes
Probe Cables (2) 12' (3.5m) HC-6390.5
Probe Cables (2) 33' (10m) HC-6390.6

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

190
Ultrasonic CONCRETE

HC-6320
HC-6330

H-2984

Pundit Lab, Ultrasonic Test Device multiple trigger modes and zoom functionality to
Transducers for Pundit Lab
ASTM C597-02, EN12504-4, BS 1881 Part 203, permit precise determination of the transmission
ISO1920-7:2004, IS1311 24 kHz Transducer (2 required) H-2984.1 time. An extensive range of transducers for the
The Pundit Lab ultrasonic tester can be used to 54 kHz Transducer (2 required) H-2984.2 Pundit PL-200 are available.
detect the presence of cracks, voids and other 150 kHz Transducer (2 required) H-2984.3 The Pundit PL-200PE employs state-of-the-art
imperfections in concrete, as well as determine and 250 kHz Transducer (2 required) H-2984.4 pulse echo technology to extend the ultrasonic
monitor the strength and deterioration of concrete, application to objects where access is restricted to
500 kHz Transducer (2 required) H-2984.5
which may have occurred due to age, fire, frost or a single side. The measurement process is greatly
chemical attack. The Pundit Lab devices provide (2) 54 kHz Exponential Transduc- assisted by Proceq innovations such as advanced
H-2984.6
optimized pulse shaping, automated transmission ers (include calibration rod) echo tracking and automatic estimation of pulse
settings and a range of powerful transducers. They (2) 250 kHz Shear Wave Transduc- velocity. The A-scan mode allows direct analysis
allow analysis of the received signal and manual H-2984.7 of the raw signal and the real-time B-scan mode
ers (include couplant)
triggering directly on the instrument. Full remote provides a cross-sectional view perpendicular to
control of all transmission parameters, data log- Pundit Ultrasonic Pulse Velocity and Echo the scanning surface. This allows the user to deter-
ging function and functionality that can turn your ASTM C597-02, EN12504-4, BS 1881 Part 203, mine the slab thickness and to localize subsurface
PC into an oscilloscope. USB interface and data ISO1920-7:2004, IS1311, CECS21 deformities such as voids, pipes, delaminations
analysis software provide data analysis and export The Pundit PL-200 and PL-200PE are the and honeycombing. Control buttons and optical
to third party programs through Open interface first instruments using a new generation and feedback directly on the probe increase measure-
such as LabVIEW. Pundit Lab consists of: display design-protected Touchscreen Unit. They are ment efficiency and make the instrument even
unit, 2 transducers (54kHz), 2 BNC cables 1.5 m, specifically designed to be used on-site, in harsh more user-friendly.
couplant, calibration rod, battery charger with environments for a range of applications while pro-
USB-cable, 4x AA (LR6) batteries, data carrier with viding enhanced measurement modes. The Pundit Specifications
software, documentation and carrying case PL-200 and PL-200PE feature a new generation Range 0.1 – 7930 μs
The Pundit Lab+ comes with an extended feature and design-protected Touchscreen. This screen Resolution 0.1 μs (< 793 μs), 1 μs (> 793 μs
set, making it particularly suitable for on-site mea- features the highest resolution and sharpest image
Display 7” color display 800x480 pixels
surements. Functions include, an integrated gain of any comparable product available in the market.
This coupled with a powerful dual-core processor Pulse Volt. UPV 100 – 450 Vpp
stage making an external amplifier unnecessary
when using long cables or exponential transducers, allows the best possible analysis of the measured Pulse Volt. UPE 100 – 400 Vpp
a real time stamp for recording the time of mea- waveforms. Typically, up to 100,000 A-Scans can Bandwidth 20 – 500 kHz
surement, a data review list that allows previous be stored on the device. Furthermore, advanced
Receiver Gain 1x – 10,000x (0 – 80dB)
measurements to be viewed on site, and a correla- ultrasonic products currently being developed will
be directly compatible, extending the application Memory Internal 8 GB Flash memory
tion to compressive strength either directly from
pulse velocity or in combination with a rebound range and making the Pundit Touchscreen a sound Battery Lithium Polymer, 3.6 V, 14.0 Ah
value (SONREB method). Pundit Lab+ consists of: future proof investment Battery Life > 8h (std. mode)
display unit, 2 transducers (54kHz), 2 BNC cables The Pundit PL-200 provides an extended range Operating Temp. -10°C – 50°C (Non-charging)
1.5 m, couplant, calibration rod, battery charger of measurement modes and superior features for
with USB-cable, 4x AA(LR6) batteries, data carrier on-site testing: Assessing the concrete uniformity Humidity < 95 % RH, non condensing
with software, documentation and carrying case using standard A-Scans and the new Line Scan
functionality, estimating the compressive strength Pundit PL-200 Pulse Velocity HC-6320
Pundit Lab Ultrasonic Test Device H-2984
of concrete or measuring the surface velocity and Pundit PL-200PE Pulse Echo HC-6330
Pundit Lab+ Ultrasonic Test Device H-2983 Ship wt. 40lbs. (18.1kg)
Ship wt. 13.4lbs. (6kg) the depth of perpendicular cracks. The intelligent
software supports directly accessible settings in
real time from the measuring screen and allows

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 191
CONCRETE Ultrasonic
Ulttraso
onic

HC-6460

HC-6450

Rapid Ultrasonic Pulse Echoing Imaging The Pundit 250 Array consists of: Pundit Touch- Pundit Live Array Pro
The Pundit 250 Array is a rapid ultrasonic pulse screen, Pundit Array transducer, Pundit 250 Array The Pundit Live Array Pro is a rapid ultrasonic pulse
echoing imaging scanner that can be used for software, Pundit Array Cable 12-pin 1.5m, Pundit echoing imaging scanner that can be used for that
deep scanning of concrete and fiber-reinforced Array contact tester, 6x Rechargeable AA NiMH can be used to check for quality assessment and
concrete. It can be used for thickness measure- batteries, power supply, USB cable, calibrated uniformity, thickness measurements from a single
ments of thick concrete and tunnel linings; deter- tape, DVD with software, documentation, carrying side, location of delaminations, voids and honey-
mining localized defects such as voids, honey- strap and carrying case. coming, location of hollow pipes, pipes and ten-
combing and depth and extent of delaminations don ducts beyond the rebar layer and assessment
and the detection of objects in the concrete such Specifications of fiber-reinforced concrete. The wireless Pundit
as pipes and tendon ducts beyond the rebar layer. Gain 0 to 80dB Live Array Pro tomography scanner is connected
The Pundit 250 Array is based on the ultrasonic Analog Bandwidth 15 to 100kHz with a free iOS App to any compatible Apple®
multi-channel pulse echo technology using 8 chan- iPad. It comes with Artificial Intelligence (A.I.) user
Range 0 to 1000μs
nels. One channel transmits and the echoes are support and 3D imaging capabilities. It provides
Resolution 1μs real-time measurement, 3D grid and line scanning
received by the other seven channels. Each chan-
nel transmits in turn. and can stitch images together.
Pulse Voltage ± 150V
A complete measurement consists of 56 A-scans. The Live software is a browser-based webtool that
These are used to compute and display a B-scan Pulse Shape Rectangle provides:
in real-time using the Synthetic Aperture Focus- PRF 8 to 200ms • High resolution imaging of thickness variations,
ing Technique (SAFT). Coupling two transducers delaminations, voids and tendon ducts
Operating Time 7 Hr (min.)
results in a 16 channel aperture processing a total • Cursors for depth and horizontal displacement
of 240 A-scans per measurement cycle. Number of Channels 8
information
The 250 Array provides high-resolution scanning • Settings directly accessible on measuring screen
with high-quality images of defects, rebar and ten- Pundit 250 Array (Pulse Echo) HC-6450 • AI positioning system
don ducts with superior near-field performance. Ship wt. 13.2lbs. (6kg)
• Automatic back wall detection
No couplant is required due to the dry point con- Rapid Ultrasonic Pulse Echoing Upgrade Kit
tact technology. Upgrade Kit for upgrading Pundit 200 to Pun- • Automatic pulse velocity estimation
The Pundit Array includes a clear rear display for dit 250 Array consisting of: Pundit Array trans-
Specifications
status information and immediate feedback of ducer, Pundit 250 Array software, Pundit Array
readings, an integrated laser for guided mea- Cable 12-pin 1.5m, Pundit Array contact tester, 6x Gain 0 to 80dB
surements and a removable battery pack with Rechargeable AA NiMH batteries, calibrated tape, Analog Bandwidth 15 to 100kHz
rechargeable AA batteries. DVD with software, documentation, carrying case.
Range 0 to 1000μs
The unit is extremely flexible, allowing sin- Pundit 250 Array (Pulse Echo) HC-6451
Ship wt. 5.5lbs. (2.4kg) Resolution 1μs
gle-handed positioning, as well as double-handed
positioning for increased control. Upgradeable to Pulse Voltage ± 150V
Pundit Accessories
16 channels, which doubles the scan width.
Pundit Array transducer HC-6450.1 Pulse Shape Square wave
Transducer extension kit HC-6450.2 Pulse Delay 8 to 200ms
Dual-handle kit HC-6450.3 Number of Channels 8
Battery Pack, complete HC-6450.4
Battery, Rechargeable (6) HC-6450.5 Continued on next page…
Calibrated Tape, set of (5) HC-6450.6

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

192
Ultrasonic, Pulse & Sonic Echo CONCRETE

HC-6440

HC-6485

The Pundit Live Array Pro is based on ultrasonic Cross Hole Ultrasonic Monitor (CHUM)
CHUM Accessories
multi-channel pulse echo technology using 8 chan- ASTM D6760; AFNOR NF P 94-160-1
nels. One channel transmits and the echoes are The CHUM (Cross Hole Ultrasonic Monitor) uses Transceiver, 100m reel HC-6440.1
received by the other seven channels. Each chan- the Crosshole Sonic Logging (CSL) method (ASTM Transceiver, 150m reel HC-6440.2
nel transmits in turn. No couplant is required due D6760-16) to perform high-resolution quality con- CHUM 3DT Software HC-6440.3
to the dry point contact technology. trol on deep foundations.
A complete measurement consists of 56 A-scans. The system uses an ultrasonic wave sent from an
These are used to compute and display a B-scan emitter to a receiver while both are pulled through Sonic Echo Foundation Tester
in real-time using the Synthetic Aperture Focus- water-filled access tubes embedded in the con- ASTM D5882
ing Technique (SAFT). Coupling two transducers crete. The measured arrival time and energy are The FTG is a small laptop or tablet powered, non-
results in a 16 channel aperture processing a total directly related to concrete quality. destructive system for measuring the depth and
of 240 A-scans per measurement cycle. The Pundit Additional methods supported by the CHUM are integrity of drilled shafts, driven piles, concrete
Live array Pro consists of the Pundit Array trans- Single Hole Ultrasonic Testing (SHUT) and Tomog- mats, and timber foundations using the Sonic Echo
ducer, Pundit Array contact tester, 6x rechargeable raphy (two- and three-dimensional). principle (also called the PIT or Low Strain Integrity,
AA NiMH batteries, power supply, Proceq Live as well as other names).
Main features:
Wi-Fi module, 3x Pundit Live tape measure, docu- Requires only minimal training for use — connect
mentation and carrying case. • Easy to use; The user-friendly software makes it
the FTG to your laptop or tablet and start testing
possible to master the CHUM in less than a day. No
Does not include iPad. with the FTG software. The system includes every-
additional expensive training required
Pundit LIve Array Pro HC-6460 thing you need for testing except for a user-pro-
Ship wt. 13.2lbs. (6kg) • Powerful tomography features vided Windows 7, 8, or 10 laptop or tablet - includ-
• Unlike other system based on an embedded ing an accelerometer receiver and a hammer.
Pundit Live Array Accessories computer (which may soon become obsolete), Features:
Pundit Array transducer HC-6450.1 CHUM connects to the USB port of your regular
• Small, lightweight and easily transported
notebook computer or Tablet PC.
Transducer extension kit HC-6450.2 • Fast and accurate field measurements
The basic CHUM package includes everything
Dual-handle kit HC-6450.3 • Real-time waveform display while testing
required to perform CSL and 2D tomography:
Battery Pack, complete HC-6450.4 • Digital filtering of data
• The CHUM instrument, two ultrasonic transduc-
Battery, Rechargeable (6) HC-6450.5 ers, two 50m cable reels, two depth meter pul- • Switch between English and metric units
Calibrated Tape, set of (5) HC-6450.6 leys , cables and AC power adapter • Save results for later review
• Optional: 100m/150m cable reels, 3D • Includes accelerometer receiver and cables
tomography • Includes 3 lb (1.4 kg) non-instrumented hammer
• Testing, analysis and reporting software with removable tips
• Interpretation assistance package For use with a Windows 7-10 devices supplied
• 10 years of free software upgrades by the user
• 3 year warranty on hardware Sonic Echo Foundation Tester HC-6485
Ship wt 10lbs. (4.5kg)
Cross Hole Ultrasonic Monitor HC-6440
Ship wt. 20lbs. (9.1kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 193
CONCRETE Pulse Echo, Resistivity

H-2879
H-2880

H-2879.200

Resipod Resistivity Meter of early compressive strength. This makes it one of Concrete Thickness Gauge
AASHTO T358-15 the most versatile NDT methods for concrete. The Concrete thickness gauge measures concrete
Resipod is a fully integrated 4-point Wenner probe, • Waterproof and designed to float slab thickness without drilling. With this device you
designed to measure the electrical resistivity of no longer need to drill, core, or excavate sites to
• Supplied with a USB connection and dedicat-
concrete in a completely non-destructive test. determine concrete slab thickness. The CTG-2 is
ed Resipod Link PC software, rugged carrying
Operating on the principle of the Wenner probe, a nondestructive system for measuring the thick-
case, test block and documentation
the Resipod is designed to measure the electrical ness and integrity of concrete slabs. The Concrete
• DOT tested and field proven through highway thickness gauge detects: voids, honeycomb areas,
resistivity of concrete or rock. A current is applied
department studies cracks and delamination.
to the two outer probes, and the potential differ-
ence is measured between the two inner probes. Resipod Resistivity Meter, 1.5" (38mm) H-2879 It can be used on pavements, tunnel linings, walls
The current is carried by ions in the pore liquid. The Resipod Resistivity Meter, 2" (50mm) H-2879.50 and other plate-like structures using the Impact
Ship wt. 5.5lbs. (2.4kg)
calculated resistivity depends on the spacing of the Echo principle. Easy-to-use, this unit requires no
probes. Resipod Geometric Accessory special knowledge or training— just follow the easy
Resipod geometric is designed to comply with instructions and connect the unit to a user-pro-
It is extremely fast and stable and packaged in a
the latest research intended to extend the current vided Windows-based computer or tablet and
robust, waterproof housing designed to operate
limits of the AASHTO T358-15 standard, which is start testing using the included WinCTG2 software.
in a demanding site environment. The Resipod is
limited to particular sample geometries and a max- Software Features:
the successor of the classic CNS Farnell resistivity
imum aggregate size of 1.5" (38mm).
meter. • Olson’s WinCTG-2 Software is used for data
Resipod Geometric Accessory H-2879.200 acquisition and analysis.
Surface resistivity measurement provides Ship wt. 5lbs. (2.2kg)
extremely useful information about the state of a • Report Capability: Use X and Y coordinates to
Resipod Bulk Resistivity Accessory
concrete structure. Not only has it been proven to set up a test grid. Generate a thickness summary
The bulk resistivity test is an alternative method
be directly linked to the likelihood of corrosion and table which can be exported to most spread-
where the sample resistivity is measured between
the corrosion rate, recent studies have shown that sheets in comma separated format. For greater
electrical plates placed at either end of the sam-
there is a direct correlation between resistivity and accuracy, calibrate the unit at a location of
ple. The geometry factor is very simple and the
chloride diffusion rate and even to determination known thickness to obtain the concrete velocity
test is rapid to perform, with similar advantages as
for the job.
Resipod Specifications the surface resistivity test. The resipod bulk resis-
tivity kit provides everything necessary for carrying Thickness Gauge Specifications
Range 0.1 – ca. 1000 k1cm out this test on standard 4" (100mm) diameter
Resolution, 200μA ±0.2 k1cm or ±1% cylinders. Thickness range 3.2" to 6' (81mm to 1.8m)
Resolution, 50μA ±0.3 k1cm or ±2% Resipod Bulk Resistivity Accessory H-2879.300 Power CR123A 3V Lithium battery
Ship wt. 2lbs. (.9kg)
Resolution, <50μA ±2 k1cm or ±5% Frequency resolution 10Hz
Frequency 40 Hz
Samples per test 4545
Memory 500 measured values
Sampling Rate 45454
Power >50 hours autonomy
Cable length
Charger USB type B, (5V, 100mA) 3' (910mm)
(test head)

Concrete Thickness Gauge H-2880

Ship wt. 6 lbs. (2.7kg.)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

194
Resistivity CONCRETE

HG-9037.3F

Surf™ Surface Resistivity HG-9035.3F

AASHTO T358-15
be used to monitor several other parameters such
Surf™ is a laboratory non-destructive test device SURF ™ Specifications
as the changes of water content and time of setting
for rapid, easy and accurate measurement of the
Measurement Channels 4 in concrete specimens.
surface electrical resistivity of concrete based on
the four-probe (Wenner-Array) technique accord- In concrete materials, electrical resistivity has been
Measurement Display Yes well correlated with important durability parame-
ing to AASHTO TP 95-11, and pending ASTM
specifications. Surf™ has a unique and customized ters such as permeability and diffusivity. In addition,
LCD Display Area 65 x 33 mm this non-destructive test can easily be conducted
setup, which enables the measurement of electrical
resistivity with high accuracy by reducing the dura- on fresh or hardened concrete specimens at differ-
Dimensions of Device 200 × 160 × 70 mm
tion of the test and minimizing ambient effects. ent ages or various stages of hydration in order to
study workability, setting times and durability per-
The Surf™ provides a test cradle for 4"x 8" and Software. Surf™ Data Monitor
formance of the concrete. The electrical resistivity
6" x 12" cylinders, which provides four (4) 4-sensor
method has also been applied to investigate corro-
arrays positioned at 90° intervals around the cra- Surf™ Accessories / Replacement Parts
sion of rebar in concrete, creep, aggregate segre-
dle. Surf™'s patented technology automatically Surf™ Sample Holder, gation and freeze/thaw of concrete since they affect
takes measurements at each of the sensor points HG-9031
4" x 8" (100 x 200mm) Dia. the pore network properties. The concrete electri-
around the cylinder and then repeats the process
Surf™ Verification Kit, cal resistivity techniques is also a suitable replace-
for all 8 measurements in less than 15 seconds. The HG-9032
High and Low range ment for the rapid chloride permeability test of
included PC software takes this information and
Conductive Gel - concrete (as per ASTM C1202) since there is a strong
generates the reports required by the standards
HG-9038 correlation between the electrical resistivity and
Applications: Low Viscosity, 250ml
durability performance of concrete.
• Performance-based, quality control testing Surf™ Test Cable,
HG-9033 The Giatec RCON2™ device, complete package
• Estimation of chloride diffusion coefficient Four-point with clip.
includes: RCON2™ unit, Power adapter, Test cable
• Service-life design of concrete structures Surf™ Contact Sponge Set,
HG-9034 set, Alligator test clip, Sample holder, Verification
16 pcs. Concrete Resistivity
RCON2™
• Remaining life estimation of structures kit, Fresh concrete probe, User manual, Commu-
• Crack detection in under load concrete ASTM C1202 nication PC software, USB cable, 2 bottles of con-
• Monitoring the setting time of fresh concrete RCON2™ is a non-destructive testing device that ductive gels, 2 pairs of contact sponges.
measures the electrical resistivity of concrete sam- Giatec RCON2™ Complete HG-9035.3F
Features:
ples. Resistivity has been shown to be an excellent Shipping wt. 16 lbs. (7.2 kg.)
• Patented technology method for evaluating the micro-structural prop- Giatec RCON2™ Device only HG-9011.3F
• Fully compliant with both AASHTO T358-15 erties of concrete, including: diffusion of chloride Shipping wt. 20 lbs. (9 kg.)
and the upcoming ASTM standard in concrete; rebar corrosion in concrete; setting
• Fast measurement (8 measurements < 15s) time of fresh concrete; curing of concrete; moisture RCON2™ Accessories / Replacement Parts
• Four-channel surface resistivity meter transfer in concrete; cathodic protection design,
Verification Kit HG-9012
and crack detection in concrete.
• Variable frequency (13 - 100 Hz) Sample Holder,
Since RCON2 is a non-destructive testing method HG-9013
• Limits moisture loss 2 pair Contact Sponges
and requires no special sample prep, it can utilize
• Automatic report generation with PC software Contact Sponge, 1 pair 150mm HG-9014
the same samples that are currently being used for
• Fresh concrete testing/crack detection compressive strength testing without affecting that Conductive Gel -
The Giatec Surf™ kit includes" the Surf™ unit, 100 test. HG-9015
Low Viscosity, 250ml
× 200mm (4" x 8") sample holder, power adapter, RCON2 is fast (measurement time is less than 5
Conductive Gel -
USB cable, communication software, user manual, seconds), accurate (±2%, utilizing variable fre- HG-9016
Medium Viscosity, 250 ml.
and conductive gel. quency method) and flexible (the measurement
Giatec Surf™ Complete Kit HG-9037.3F can be taken with different settings and test con- Fresh Concrete Probe HG-9017
Giatec Surf™ Device Only HG-9030.3F figurations). It also allows for continuous measure- Test Cable Set HG-9018
Ship wt. 15 lbs. (6.8 kg.) ment of electrical resistivity over time, which can

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 195
CONCRETE Freeze-Thaw
Specifications

Condenser -30°F to 45°F (-34°C to

Operating 7°C) evap (R-404A)
Temperature Designed for up to 110°F
Range (43°C) ambient

Data channels 1
1000 tests and up to 3000
Data storage
readings per test
84"L x 32"W x 35.75"H
Cabinet Dims
(213 x 81 x 91cm)

22.25"H x 16.25"W
Controller Dims
x 6"D (56 x 41 x 15cm)

208/230V 50/60Hz
Voltage
Single Phase - 30amps
HC-3186S.4F Order H-3195 freeze-thaw molds separately,
on next page.

Rapid, Freeze-Thaw Cabinet The HC-3186S Freeze-Thaw provides the following Freeze-Thaw Cabinet includes
ASTM C666, procedure A; AASHTO T161 capabilities: (17) H-3185TA Stainless Steel Sample Trays,
Humboldt's Elite Series, Freeze-Thaw Cabinet • User-created test control is possible, for changing 3" x 4" x 16.375" (76 x 102 x 406mm)
is used to measure the resistance of concrete to freeze time, minimum temperature, maximum (1) H-3185TSA Stainless Steel Sample Tray with
deterioration caused by repeated cycles of freez- temperature and the number of cycles desired. spout, 3" x 4" x 16.375" (76 x
ing and thawing. The HC-3186S.4F Freeze-Thaw • Real-time, on-screen control and monitoring Freeze-Thaw Cabinet, 220V 50/60Hz HC-3186S.4F
is designed to test up to eighteen 3" x 4" x 16" with graphing, allowing different data views to Ship wt. 1200lbs. (544kg)
(76 x 102 x 406cm) concrete specimens simultane- be chosen.
ously, with one being a control. Key features of the • Test data can be reviewed after a test is com-
Freeze-Thaw include: pleted, which includes tabulation and graph views.
• Fully automatic operation frees operator to • Touch-screen interface for easy navigation.
perform other lab duties.
• Test data can be via the front USB port and a flash
• Allows users to establish field control using drive. Reports can be generated by using Hum-
correlations between concrete strength and boldt's HM-Data Download software and the Controller Specifications
durability exported data. 7" (178mm) VGA
• Permits the evaluation of variables in concrete Display (480 x 800)
It is possible to have up to eight freeze-thaw cycles
Resistive-touch screen
properties and conditioning. within a 24-hour period, however, the exact number
Real-time test data Graphic and tabulation
• Useful in the evaluation of the durability of aggre- of cycles is dependent upon the time required for
gates, as well as the properties of admixtures. the temperature at the center of the control prism Processor Dual 32-bit ARM
Humboldt's touch-screen controller provides you to fall from 40 to 0°F (4.4 to -17.8°C) and then back RAM 64MB
with full, graphical monitoring of all testing func- to 40°F (4.4°C). The temperature at the center of
Memory,
tions in a stand-alone application. Now you can the control specimen is controlled with the use of a 4GB
non-volatile
have full, finger-tip control and monitoring of all 0.75HP (0.6KW) refrigeration unit and electric resis-
tance heaters with fully automatic controls. Data acquisition 1 Channel
testing functions with Humboldt's touch-screen
controller, found on our Freeze-Thaw Cabinet. Current temperature of the control specimen 1 reading every
Logging speed
5 minutes
The seven-inch, waterproof screen provides can be checked by a glance at the large, 7"
at-a-glance monitoring of testing functions, in a color display on the controller. It is also possi- Multi-test storage 1000
real-time graphical display, without the use of a ble to track the temperatures of freeze-thaw Points per test 3000
computer. cycles in real-time with a glance at the display. used to export data
For corrosion resistance and long service life, the USB port
Now, in a stand-alone application, you will be able via thumb drive
to run tests and display results while viewing tabula- HC-3186S Freeze-Thaw features a stainless steel, Ethernet for network
tion, basic x-y graphs and temperature readings in 84"L x 32"W x 35.75"H (213 x 81 x 91cm) cabinet connection connectivity
real-time during the test, using user-defined, basic construction with 3" (76mm) insulation on all sides.
data acquisition. Test data is stored in the device The internal test compartment measures 74" x 26" Firmware Update Ethernet or flash drive
and can be downloaded to a USB drive via the x 6" (188 x 66 x 15cm). A 30-amp circuit is required
machine's USB port. for operation

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

196
Freeze-Thaw, Flexural Resonance CONCRETE

H-3185TSA
H-3195, H-3198, H-3185TA
H-3198M

H-3185SH

H-3176 HC-3177

Replacement Parts Stainless Steel Sample Tray Resonance Test Gauge

100 x 100 x 400mm specimens. ASTM C215, C666
Item Part No.
Stainless Steel Sample Tray H-3185TM Designed for lab use, the Resonance Test Gauge
Thermocouple for H-3185B H-3185B.3 Ship wt. 2 lb. (0.9kg) (RTG) connects to the customer’s Windows device
Thermocouple for H-3185SD H-3185SD.3 Stainless Steel Sample Tray with Spout for longitudinal, Flexural and torsional resonance
Heating Element 3" x 4" x 16.375" (76 x 102 x 406mm) with spout. testing of concrete, rock, asphalt and masonry (cyl-
H-3185SH
specify 115V or 230V SS Sample Tray with Spout H-3185TSA inders, beams and cores). Results can be exported
7-Day Chart Paper (100/Bx)
Ship wt. 3 lb. (1.3kg) to the Calculations Spreadsheet which automat-
H-3185.1 ically determines dynamic properties such as
-20 to +80°F E-Meter for Flexural Resonance of Concrete
ASTM C215,C666 Young’s modulus (E), shear modulus (G) and Pois-
7-Day Chart Paper (100/Bx)
H-3185.1AC son’s ratio (v) (meets ASTM C215 standard for res-
-30 to +10°C The E-meter can determine flexural resonance of
onance testing of concrete for dynamic properties
concrete under accelerated freezing and thawing
7-Day Chart Paper (100/Bx) and ASTM C666 standard for freeze-thaw durabil-
H-3185.1AF cycles and aggressive environments, conforming
-20 to +50°F ity testing).
to ASTM C215 and C666. It determines the res-
Pan Replacement Kit (1 per kit) H-3185.3A onant frequencies of the three modes of vibration Unit includes the following: 2 oz. Spherical Head
and is the only method of calculating the follow- Hammer; Spatula for Adhesive Grease; RTG
ing material parameters non destructively: Youngs Device, Jump Drive with RTG Software; Adhesive
Freeze-Thaw Specimen Mold Grease; Accelerometer, Microdot BNC Cable,
modulus of elasticity, modulus of rigidity, Poisson
ASTM C233, C666; AASHTO T157, T161 Mounting Block; Sponge Rubber Mat for Speci-
ratio and damping constant. Frequencies are auto-
For 3" x 4" x 16" (76 x 102 x 406mm) specimens matically scanned in one of four ranges. It can men Support. The RTG system must be used with
exposed to rapidly repeated freeze-thaw cycles in handle specimen sizes up to 6 inches (150mm) in a Windows 7-10 device running the RTG software.
water or air. Mold is cold-rolled steel with detach- cross section and from 1.75 inches (45mm) to 28 The computer or tablet is supplied by the user.
able base plate. inches (711mm) in length. A semi-automatic fea- • Real-time waveform display while testing
Freeze-Thaw Specimen Mold H-3195 ture facilitates the fast identification of resonance. • Automatic frequency calculation
Ship wt. 37.1 lb. (16.82kg)
Oscillator frequency range: 10 Hz to 100 kHz in 4 • Full user selection of gain and units
Freeze-Thaw Specimen Mold switched range Frequency indicator display: 6 digit
Mold for 4" x 4" x 16" specimens. LED Gate times: 1 sec. or 10 sec. switch selected, Specifications
Freeze-Thaw Specimen Mold H-3198 LED indicated accuracy: 20 ppm + 1 count over full
Ship wt. 40 lb. (18.1kg)
Sampling Rate 45,455 samples/second
operating temperature range
Freeze-Thaw Specimen Mold E-Meter for Flexural Resonance H-3176 Accelerometer Flat
Mold for 100 x 100 x 400mm specimens. Ship wt. 113 lb. (51.2kg)
Frequency Response 20,000 Hz
Measurement Range
Freeze-Thaw Specimen Mold H-3198M
Ship wt. 40 lb. (18.1kg) Number of Samples
1024 samples
Stainless Steel Sample Tray Acquired Per Test
3" x 4" x 16.375" (76 x 102 x 406mm) specimens. Nyquist Frequency 22,727 Hz
Stainless Steel Sample Tray H-3185TA
Ship wt. 4 lb. (1.8kg)
Frequency Resolution 44.39 Hz

Resonance Test Gauge HC-3177

Ship wt 10lbs. (4.5kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 197
CONCRETE Linear Traverse, Strain

H-3230

H-2964A

H-2964A (shown with computer, not included)

Linear Traverse Machine Multi-Length Strain Gauge Set

Strain Gauge Replacement Parts
ASTM C457 Part B Mechanical gauge is recommended as a substitute
for the Whittemore strain gauge for many appli- Contact Point H-3230.2
The linear traverse machine is used to facilitate
the counting of microscopic voids in concrete. The cations. Designed to measure strain in mason- Contact Seat H-3230.4
H-2964A complies or exceeds ASTM C457 specifi- ry-type materials, structural components under Brass Inserts (pkg. of 100) H-3230.3
cations. Computer software controls the motorized load, opening or closing of structural cracks,
Invar Master Bar H-3230.5
specimen table with solid-state positioning motors. measuring relative structural displacements, rock
mechanics testing and drying shrinkage of con- Invar Master Bar, Metric H-3230.5M
The software controls the traverse patterns and
distances between measurements based on test crete block testing. Instrument frame is cast alumi- Punch Bar Point H-3230.7
sample parameters. The software also provides num alloy with 5 master settings of 2, 4, 6, 8 and Punch Bar H-3230.16
counting determinations to be made to materi- 10 inches, easily set for gauging. Dial indicator has
.0001" minimum graduation; effective strain Punch Bar, Metric H-3230.16M
al-type categories. Test results can be exported to
Microsoft Excel for analysis and printing. Printable range is 0.3". Maximum linear measurement is
reports can be configured to Canadian Ministry of 0.4". Set includes: strain gauge, dial indicator, 8
Transport or ASTM requirements. brass inserts, 2 contact seats, 2 mounted contact
points, invar master bar, punch bar and one com-
Unit includes:
partmented wood storage case. Metric model has
• Digital microscopic video camera with integral
5, 10, 15, 20 and 25cm settings and dial indicator
light source.
with 002mm graduations.
• Computer-controlled motorized specimen table
Strain Gauge Set H-3230
with solid-state positioning motors.
Strain Gauge Set, Metric H-3231
• Software CD with controller Strain Gauge Set, Digital H-3230D
• Multi-adjustable camera stand. Strain Gauge Set, Digital, Metric H-3231D
Computer is not included Ship wt. 1 lbs. (.45 kg.)

Linear Traverse, 120V 60Hz H-2964A

Linear Traverse, 220V 50/60Hz H-2964A.4F
Ship wt. 100lbs. (45.3 kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

198
Crack Monitors CONCRETE

HC-2942A

HC-2940 H-2936A HC-2937 HC-2938

HC-2939

H-2816.8
HC-2964
HC-2943 HC-2944

Crack Width Gauge Corner Crack Gauge Caliper Mark Discs, Stainless Steel
ACI 2242-01 The corner crack gauge uses a hinged mounting Caliper marks can be affixed with adhesive to
The crack width gauge is designed specifically to bracket to allow monitoring of cracks in corners either side of a crack to be monitored and then
measure widths and locations of cracks prior to with angles between 70° and 180°. Monitors both used to measure crack movements with a caliper.
beginning a monitoring program. The crack width internal and external corners. Corner gauges use Pkg. of 100.
gauge is suitable for internal and external use. It is the design of the plus gauge using four small pegs, Caliper Mark Discs, Stainless Steel HC-2964
made of polycarbonate, which has a coefficient of which ensure alignment during installation and Ship wt. 0.3lb. (.13kg)
linear thermal expansion of 7.0 x 10-5 cm/cm/°C for are then removed during monitoring. The corner
Screws and Plugs for Crack Gauge
ambient temperatures between -30°C and 30°C. gauge also provides measuring flats, which allow
Package of (4) four zinc-plated screws and four
The scale is calibrated from the end of the gauge accurate readings to be taken with calipers during
plastic plugs, suitable for affixing a crack gauge to
to facilitate measuring cracks in corners. Supplied monitoring. Can be fixed to the surface with screws
a flat surface.
in protective case. or adhesive (not included). Supplied with instruc-
tions and record sheet. Sold in pairs. Screws and Plugs for Crack Gauge HC-2944
Crack Width Gauge HC-2940 Ship wt. 0.2lb. (.09kg)
Ship wt. 0.3lb. (.13kg) Corner Crack Gauge, (2-pack) HC-2938
Ship wt. 0.4lb. (.18kg) Digital Caliper, 8" (200mm)
Standard Crack Gauge Provides accurate outside, inside, depth and step
Crack gauges can be used to monitor horizon- Displacement Crack Gauge
measurements and features large, easy-to-read
tal or vertical movement across a crack on a flat The displacement crack gauge monitors horizon-
LCD digits, rolling thumb wheel; plus control
surface. The H-2936A standard crack gauge is a tal and displacement movement where there is a
buttons for zero, on/off and inch/mm functions.
precision device that consists of two plates, which step across a crack due to displacement of “out-
Range: 0-8" (0-200mm); Accuracy: ±0.001.
overlap for a part of their length. The bottom of-plane” movement. The gauge consists of a base
plate (not calibrated), a top plate (calibrated) and Digital Caliper, 8" (200mm) H-2816.8
plate is transparent and marked with a hairline
Ship wt. 2.2lb. (.9kg)
cursor in the form of a cross. Can be fixed to the a graduated ruler. The ruler is removed from the
surface with screws or adhesive (not included). gauge when not taking a measurement, but used Crack Monitoring Kit
Supplied with instructions and record sheet. to measure the relative movement in the plates. A kit designed to provide all the products needed
Can be fixed to the surface with screws or adhe- to set up a crack monitoring program. Supplied
Crack Width Gauge H-2936A
sive (not included). Supplied with instructions and with a courier bag with shoulder strap, the kit
Ship wt. 0.15lb. (.06kg)
record sheet. includes: (1) crack width gauge; (5) crack gauge
Crack Gauge Plus plus (1) pair of corner crack gauges; (7) packs of fix-
Corner Crack Gauge HC-2939
The crack gauge plus can be used to monitor hor- ing screws; (1) crack monitor adhesive; instruction
Ship wt. 0.4lb. (.18kg)
izontal or vertical movement across a crack on a booklet and record sheets.
flat surface. The Plus offers two upgrades to the Crack Monitor Adhesive
Crack Monitoring Kit HC-2941
standard design. Rather than presetting the two Crack monitor adhesive is a fast-hardening 2-com-
Ship wt. 3.5lb. (1.5kg)
measuring plates together at zero with tape, the ponent epoxy adhesive for use in affixing crack
plus uses four small pegs, which ensure alignment monitors to concrete surfaces. Comes in a one Essential, Digital Crack Monitoring Kit
during installation and then removed during mon- ounce dual-tube syringe for easy application. This set contains all the essential components
itoring. The plus also provides measuring flats, Crack Monitor Adhesive HC-2942A needed to set up a crack monitoring system using
which allow accurate readings to be taken with cali- Ship wt. 0.3lb. (.13kg) precision digital calipers. This kit includes a crack
pers during monitoring. Can be fixed to the surface width gauge to measure the width of cracks prior
Caliper Marks
with screws or adhesive (not included). Supplied to monitoring, a digital caliper, a pack of stainless
Caliper marks can be affixed with adhesive to
with instructions and record sheet. steel discs and crack record sheets. Also included
either side of a crack to be monitored and then
is an illustrated manual with full instructions, which
Crack Gauge Plus HC-2937 used to measure crack movements with a caliper.
describes best practice methods for using the cali-
Ship wt. 0.2lb. (.09kg) Caliper Marks (Pkg of 100) HC-2943 pers. All the components can be re-ordered sepa-
Ship wt. 0.3lb. (.13kg) rately in order to replenish the kit.
Essential, Digital Crack Monitoring Kit HC-2947
Ship wt. 3.5lb. (1.5kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 199
CONCRETE Crack Monitors
HC-2948

HC-2941
HC-2947

HC-2955.1

HC-2956
HC-2950

HC-2955

Professional, Digital Crack Monitoring Kit hours. Includes a download link for the latest ver- Extension Cables for Concrete Crack Data Loggers
This set contains all that is needed to set up a crack sion of the user guide and software. Extension kit for the HC-2955 and HC-2956 Con-
monitoring system using precision calipers. This Concrete Crack Data Logger HC-2955 crete Crack Data Loggers for those applications
kit includes a crack width gauge to measure the Ship wt. 1lb. (.45kg) requiring a longer span across larger cracks and
width of cracks prior to monitoring, a digital cali- joints or where mounting points require a longer
Concrete Crack Data Logger, Wifi
per with data port, a pack of stainless steel discs, expanse. These cables are available in 4 sizes: 12"
The HC-2956 wireless crack data logger provides a
a pack of caliper marks, a pair of corner discs and (30cm); 20" (50cm); 39" (100cm) and 79" (200cm).
method to monitor cracks and linear displacements
crack record sheets. Also included is an illustrated Cable Extension, 12" (30cm) HC-2955.1
in concrete structures, featuring an integrated data
manual with full instructions, which describes best Cable Extension, 20" (50cm) HC-2955.2
logger, which measures both displacement and
practice methods for using the calipers. All the Cable Extension, 39" (100cm) HC-2955.3
ambient temperature. This crack detector mea-
components can be re-ordered separately in order Cable Extension, 79" (200cm) HC-2955.4
sures cracks by using a rotary, precision potentiom-
to replenish the kit. Ship wt. 1lb. (.45kg)
eter, which is driven by the winding/unwinding of a
Pro, Digital Crack Monitoring Kit HC-2948 stainless steel wire with an 80mm stroke. It is also Concrete Crack Measuring Microscope
Ship wt. 4lb. (1.8kg)
possible to add an extension to the steel cable to The crack measuring microscope is a precision,
Concrete Crack Data Logger monitor cracks over wide expanses or areas that hand-made product, which is designed specifically
The HC-2955 crack data logger provides a method are not readily accessible, such as bridge decks, for measuring cracks in concrete. This high-defini-
to monitor cracks and linear displacements in multi-faceted structures and other hard-to-reach tion microscope is further enhanced by having its
concrete structures, featuring an integrated data places. The crack detector is configured using a own adjustable light source for darkened conditions.
logger, which measures both displacement and graphic, user interface operating on a Windows® Overall height of the microscope is 5.125" (130mm).
ambient temperature. This crack detector mea- computer. The image is focused by turning a knurled knob
sures cracks by using a rotary, precision potentiom- Temperature measurement range is -4°F to 176°F on the side of the instrument and the eyepiece
eter, which is driven by the winding/unwinding of a (-20°C - +80°C) with 1° resolution. The unit is pow- scale can be rotated through 360° to align with the
stainless steel wire with an 80mm stroke. It is also ered by a user-replaceable battery, which should last direction of the crack. The 4mm width of measure-
possible to add an extension to the steel cable to between six months and five years, depending on how the ment has a lower scale, divided into 0.2mm divi-
monitor cracks over wide expanses or areas that unit is configured and frequency of downloads. sions, which are subdivided into 0.02mm divisions.
are not readily accessible, such as bridge decks, Comes complete in its own sturdy wooden pock-
Measurements are stored in internal memory, which
multi-faceted structures and other hard-to-reach et-size case.
can be downloaded to a Windows PC via a wire-
places. The crack detector is configured using a Concrete Crack Measuring Microscope HC-2950
less connection from a range of up to 150m using a
graphic, user interface operating on a Windows®
graphic user interface on a PC computer. Data- Ship wt. 2lb. (0.9kg)
computer.
logger capacity is: 51062 readings or 18236 read-
Temperature measurement range is -4°F to 176°F ings with redundant CRC, Acquisition frequency is
(-20°C - +80°C) with 1° resolution. The unit is pow- adjustable from 10 seconds to 91 hours. Includes
ered by a user-replaceable battery, which should last a download link for the latest version of the user
between six months and five years, depending on how the guide and software.
unit is configured and frequency of downloads.
Concrete Crack Data Logger HC-2956
The measurements are stored in internal memory and Ship wt. 1lb. (.45kg)
are downloaded to a Windows PC using a USB cable
(supplied). Datalogger capacity is: 51062 readings
or 18236 readings with redundant CRC, Acquisi-
tion frequency is adjustable from 10 seconds to 91

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

200
Moisture in Slabs CONCRETE

HC-3000.1
HC-3000.6
HC-3000.7

HC-3000 HC-3001

HC-3000.11

HC-3000.4
HC-3000.5
HC-3000.2C
HC-3000.3
HC-3000.2
HC-3000.10 HC-3000.9
RH/Moisture Meter Kit with BluePeg Sensor BW/Moisture Non-Invasive Meter Kit
ASTM F2170 with BluePeg Sensor
The HC-3000 concrete moisture meter for con- ASTM F2170, F2659
HC-3000.8
tractors, floor covering installers and restoration The HC-3001 is a non-invasive moisture meter with
specialists to use as a Thermo-Hygrometer or for dual-depth measuring capabilities. The RH Blue-
in-depth moisture testing of concrete following Peg Probe can be added to use as a Thermo-Hy- HC-3000 & HC-3001 Moisture Meter Accessories
ASTM F2170-11 RH in-situ probe test. Moisture grometer or for RH in-situ probe testing of con-
Blue-Peg Sensors, 5-pk. HC-3000.1
meter indicates relative humidity, temperature, crete following the latest ASTM F2170 standard.
GPP and DPT. The HC-3001's unique dual-depth pinless moisture Blue-Peg Sensors, 10-pk. HC-3000.7

If you are looking for an accurate Hygrometer, the meters allows the user to have more versatility. Blue-Peg Sensors, 1-pk. HC-3000.6
HC-3000 concrete moisture meter with RH Blue- Two moisture meters in one. Great for thinner and RH Cable HC-3000.2
Peg probe should be your choice. The RH BluePeg thicker boards, engineered floor planks, and water-
RH Cable for In-Situ Concrete HC-3000.2C
probe uses a hi-accuracy sensor with a short accli- borne finishes.
mation time. The RH BluePeg probe can be con- Wood in Scan Mode: the HC-3001 gives wood RH Adapter for Sleeves HC-3000.3
nected with a small Adapter directly to the meter. moisture readings in percent. Corrections are RH Adapter for Meter HC-3000.11
For extended reach, a cable up to 50ft long can built-in for a measuring depth of 1/4" and for 3/4" Sleeves, 20-pk., 1.8" HC-3000.4
be added. All cables have easy-to-connect and fail- for each wood species setting (specific gravitiy
Sleeves, 100-pk., 1.8" HC-3000.5
proof 35mm stereo connectors. 0.3 to 1.0). Included are 7 different settings for
bamboo. Sleeves, 10-pk., 3.0" HC-3000.10
The RH BluePeg Probe, sleeves, cable and RH
concrete moisture meter have been designed for a Building Materials in Scan Mode: the HC-3001 Calibration Salt HC-3000.9
simple and fail-proof measuring procedure. gives moisture content in percent for drywall. For Brush HC-3000.8
The RH BluePeg probe drops easily into the sleeve. concrete and light-weight building materials com-
The cap fits perfectly and is as flat as can be. The parative readings can be taken to evaluate mois-
3.5mm stereo connector can be easily connected. ture conditions and find wet spots. 1/4" and 3/4"
No pin alignment of the cable needs to be fitted. measuring depth are available. Conforms to ASTM
Plug in and read, that’s what our customers like. 2659.
RH Moisture Meter w/BluePeg Sensors HC-3000 Air in RH Mode: Add RH BluePeg Probe for ambi-
Ship wt 2.9lbs. (1.3kg) ent relative humidity and temperature, GPP and
DPT. Use meter as Thermo-Hygrometer.
Concrete in RH Mode: Add RH BluePeg Probes
and RH accessories for in-situ moisture testing of
concrete. Conforms to ASTM F2170.
BW Moisture Non-Invasive Meter
w/BluePeg Sensors HC-3001
Ship wt 5lbs. (2.26kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 201
CONCRETE Moisture in Slabs

HC-2993B
HC-2990
HC-2994 HC-2995A

HC-2994.4

HC-2994.9
HC-2994.8
HC-2994.7 HC-2994.2

Concrete Moisture Meter Features: Concrete Encounter (Moisture)

ASTM F2659, F2170, F2420, BS 5325 and BS 8293 Instant, non-destructive concrete moisture content The concrete encounter is a hand-held electronic
Tramex CMEX II is a digital display version of the test from 0 - 6.9% to ASTM F2659. moisture meter, which uses non-destructive imped-
concrete encounter. It operates on the principle of ance measurement to determine moisture levels in
Fastest, most reliable Hygro-i® RH probe for test-
non-destructive impedance measurement. Parallel concrete floors. The concrete encounter will give
ing to ASTM F2170.
co-planar electrodes are mounted on the base, you an instant reading of moisture content to over
Perform multiple tests simultaneously.
which during operation transmit a low-frequency 6% for concrete and 0-10 comparative for gypsum
Re-usable Hygro-i® Relative Humidity probes floor screeds, enabling you to make an informed
signal into a concrete slab. Quickly and easily
prove to be the lowest cost per ASTM F2170. decision on when to install floor coverings.
measures moisture content. Can be used with the
Hygro-i relative humidity probe, which when con- Test ambient site conditions of Temperature, RH, Designed to be used on clean, dust-free slabs, just
nected, changes the moisture meter into hygrome- Dew Point & Mixing Ratio. switch on and press the instrument firmly against
ter mode. This combination provides an ideal solu- Backlit display for ease of reading in low level the floor surface. Readings are then read directly
tion for measurements of ambient relative humid- lighting. from the analog meter. Coplanar electrodes with
ity, temperature and dew-point conditions within Check calibration of RH probes as often as required spring-loaded contacts enhance signal depth and
a building structure, especially concrete flooring. by standards. sensitivity to a depth of .5" (12.5mm).
Humidity readings are displayed in both % relative Instant surface temperature readings to avoid Concrete Encounter (Moisture) HC-2990
humidity and mixing ratio (grains/lb or grams/kg). Ship wt 1.4lbs. (0.6kg)
condensation.
Provides accurate and fast results allowing con- Vapor Emission Test Kit
Concrete Moisture Meter HC-2995A
crete slab testing per ASTM F2170 in-situ method, Ship wt 9lbs. (4.1kg) ASTM E1907, F1869
and ASTM F2420 RH hood method. The vapor emission test is used for determining
Relative Humidity, Hygro-i Probe
Concrete Moisture Meter HC-2994 ASTM F2170, F2420, BS 5325 and BS 8203 the moisture acceptability for the placement of
Ship wt 3lbs. (1.6kg) floor coverings and coatings over concrete slab
Relative humidity probe for use with HC-2994 con-
Concrete Inspection Kit surfaces. Using this method, users can easily
crete moisture meter.
ASTM F2659, F21703 quantify the volume of water vapor emitting from
Relative Humidity Hygro-i Probe HC-2994.5 a 1,000 square foot concrete slab over a 24-hour
A complete kit for testing concrete moisture Ship wt 2lbs. (.9kg)
per ASTM F2659 & ASTM F2170, featuring the period. Commonly known as the anhydrous cal-
HC-2994 moisture meter and Hygro-i® relative HC-2994 Moisture Meter Accessories cium chloride vapor emission method, the test is
humidity probes. The Concrete Inspection Kit directly specified by the vast majority of the floor
Hygro-i® Probe, 1 probe HC-2994.1
includes: covering Industry as the primary measure of mois-
Hygro-i® Probe, 3-pk. HC-2994.2 ture acceptability for floor covering or coating
CMEX II Digital, concrete moisture meter.
Hygro-i® Probe, 6-pk. HC-2994.3 installations. The kit consists of a calcium chloride
4 Hygro-i® RH probes for testing to ASTM F2170.
container, a specifically designed dome cover with
Hygro-i® Electronic Interface Cable Hygro-i® Probe, 12-pk. HC-2994.6
seal and step-by-step instructions. A balance or
®
12 Hole liners for testing to ASTM F2170. Hygro-i Interface Cable HC-2994.4 scale readable to 0.1 grams is required, but must
Calibration check salts for RH probes. Insulated RH Hood HC-2994.7 be purchased separately.
IRTX Infrared surface thermometer Calibration Check HC-2994.8 Vapor Emission Test Kit
and heavy-duty carry case. 12-pak (10,000 sq. ft. coverage) HC-2993B
Calibration Check Plate HC-2994.9
3-pak (1,000 sq. ft. coverage) HC-2993A
Hole Liners, 50-pk. HC-2994.10 Ship wt 4.4lbs. (1.9kg)

Hole Liners, 100-pk. HC-2994.11

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 CEMENT
Air Entrainment . . . . . . . . . . . . . .Ê206 Mixing . . . . . . . . . . . . . . . 204-205
Blaine Air. . . . . . . . . . . . . . . 210-211 Mud Testing . . . . . . . . . . . . . . .Ê222
Bleeding, Cement . . . . . . . . . . ÊÊ . . 209 Organic Impurities . . . . . . . . . . . . .Ê208
CalorimeterÊ. . . . . . . . . . . . . . . .Ê208 Prism Molds . . . . . . . . . . . . . . .Ê218
Compression Testing . . . . . . . . . . . .Ê215 Test Sand . . . . . . . . . . . . . . . .Ê205
Cube Testing . . . . . . . . . . . . . 216-217 Turbidimeter . . . . . . . . . . . . . . .Ê220
Expansion . . . . . . . . . . . . . . 220-221 Vibration Table. . . . . . . . . . . . . . . 215
Flow Properties . . . . . . . . . . . . 206-207 Vicat Testing . . . . . . . . . . . . . 211-214
Gillmore . . . . . . . . . . . . . . . . . 209 Water Retention . . . . . . . . . . . . . .Ê209
Length Change . . . . . . . . . . . . . .Ê219
204
Mixing CEMENT

H-3851.3F

H-3852.3F H-3853.3F
H-3854.3F

Mortar Mixer— 4.73L (5qt.), Basic Manual Control iron provides durability and a long service life. Mixer design conforms to CE standards, featuring
ASTM C305; AASHTO T162 the mixer provides a powerful motor for quiet and a mixing bowl cover, electronic position monitor-
Basic two-speed mixer designed to mix cement maintenance-free operation aided by the use of ing of the mixing bowl, emergency stop switch and
mortars and pastes. Mixer provides manually-con- planetary gears and a toothed, belt drive. The mix- restart protection.
trolled cement, water and sand supplies. Mixer fea- ing bowl is connected to the mixer by a quick-re- Mortar Mixer w/Program, 120/230V 50/60Hz H-3853.3F
tures a 5 Liter (5.3qt) stainless steel bowl and ASTM lease clamping system. The distance between the Ship wt. 165lbs. (775kg)

stirrer, and a two-speed motor, which runs at either mixing bowl and the stirrer is 3 ±1 mm and can be Mortar Mixer w/ Program Control and Auto Sand
140 ±5 rpm or 285 ±10rpm. Electrical Specification easily and accurately set. and Water Feed
is 110/220V 50/60Hz. Heavy-duty construction of Mixer design conforms to CE standards, featuring ASTM C305; AASHTO T162; EN 196, EN 413, EN
aluminum and cast iron provides durability and a mixing bowl cover, electronic position monitor- 480, DIN 1164; BS 3892; ISO 679; NF P15-411
a long service life. the mixer provides a power- ing of the mixing bowl, emergency stop switch and Mixer with 4.73L (5qt) capacity provides automatic
ful, three-phase DC motor for quiet and mainte- restart protection. program control and auto sand feed with manual-
nance-free operation aided by the use of planetary ly-controlled cement and water supply. Provides
Mortar Mixer, 4.73L (5qt) 120/230V 50/60Hz H-3852.3F
gears and a toothed, belt drive. The mixing bowl is Ship wt. 165lbs. (75kg) software with 4 standard programs installed cov-
connected to the mixer by a quick-release clamp- Mortar Mixer w/ Program Control and Auto ering the following standards: ASTM C305, EN
ing system. The distance between the mixing Sand Feed 196 -1,3,9; EN 480 and EN 413.Two-speed mixer
bowl and the stirrer is 3 ±1 mm and can easily and ASTM C305; AASHTO T162; EN 196, EN 413, EN designed to mix cement mortars and pastes. Mixer
accurately set. Planetary gearing and toothed, belt 480, DIN 1164; BS 3892; ISO 679; NF P15-411 features a 5 Liter (5.28qt) stainless steel bowl and
drive to ensure quiet and maintenance-free opera- Mixer with 4.73L (5qt) capacity provides automatic ASTM stirrer, and a two-speed motor, which runs at
tion. Easy-operation handle makes hoisting mech- program control and auto sand feed with manual- either 140 ±5 rpm or 285 ±10rpm.
anism makes raising and lowering the mixing bowl ly-controlled cement and water supply. Provides Features touch screen-operated control panel,
easy. Quick and reliable bowl mount also makes software with 4 standard programs installed cov- which provides fast, easy control in eight lan-
testing effortlessly. ering the following standards: ASTM C305, EN guages. Numerous safety features are incorpo-
Mortar Mixer, 4.73L (5qt) 120/230V 50/60Hz H-3851.3F 196 -1,3,9; EN 480 and EN 413.Two-speed mixer rated in the mixer and includes a service program
Ship wt. 165lbs. (75kg) designed to mix cement mortars and pastes. Mixer with malfunction messages for operator, including
Mortar Mixer, 4.73L (5qt) features a 5 Liter (5.28qt) stainless steel bowl and paddle/planetary speed and time monitoring.
ASTM C305; AASHTO T162; EN 196 ASTM stirrer, and a two-speed motor, which runs at Heavy-duty construction of aluminum and cast
DIN 1164; BS 3892; ISO 679; NF P15-411 either 140 ±5 rpm or 285 ±10rpm. iron provides durability and a long service life. the
Two-speed mixer designed to mix cement mortars Features touch screen-operated control panel, mixer provides a powerful motor for quiet and
and pastes. Mixer provides manually-controlled which provides fast, easy control in eight lan- maintenance-free operation aided by the use of
cement, water and sand supplies. Mixer features a guages. Numerous safety features are incorpo- planetary gears and a toothed, belt drive. The mix-
5 Liter (5.3qt) stainless steel bowl and ASTM stirrer, rated in the mixer and includes a service program ing bowl is connected to the mixer by a quick-re-
and a two-speed motor, which runs at either 140 with malfunction messages for operator, including lease clamping system. The distance between the
±5 rpm or 285 ±10rpm. paddle/planetary speed and time monitoring. mixing bowl and the stirrer is 3 ±1 mm and can eas-
Features touch screen-operated control panel, Heavy-duty construction of aluminum and cast ily and accurately set.
which provides fast, easy control in eight lan- iron provides durability and a long service life. the Mixer design conforms to CE standards, featuring
guages. Numerous safety features are incorpo- mixer provides a powerful motor for quiet and a mixing bowl cover, electronic position monitor-
rated in the mixer and includes a service program maintenance-free operation aided by the use of ing of the mixing bowl, emergency stop switch and
with malfunction messages for operator, including planetary gears and a toothed, belt drive. The mix- restart protection.
paddle/planetary speed and time monitoring. ing bowl is connected to the mixer by a quick-re- Mortar Mixer w/Program, 110/230V 50/60Hz H-3854.3F
Heavy-duty construction of aluminum and cast lease clamping system. The distance between the Ship wt. 170lbs. (77kg)
mixing bowl and the stirrer is 3 ±1 mm and can eas-
ily and accurately set.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 205
CEMENT Mixing, Test Sand

H-3844
H-3841WW

H-3841.1

H-3841HW
H-3841.2 H-3340
H-3820
HC-3851 H-3841 H-3825
H-3341
Mortar Mixer, 5L (5.3qt)
ASTM C305; AASHTO T162; EN 196
H-3342
DIN 1164; BS 3892; ISO 679; NF P15-411
Tube Sampler with Partitions, Bulk Cement
This excellent, alternative to the Hobart mixer fea- Mixer Components Part #
ASTM C183; AASHTO T127
tures two-speed, manual-control with a very robust Bowl positioning adapter H-3844
For sampling hydraulic cement in bulk shipments
design, expressly made for the efficient mixing of Bowl lid, acrylic H-3846L or bulk storage. Has two polished brass telescopic
cement pastes and mortar. The mixer offers two
Beater— stainless steel, flat-type H-3841.1 tubes with registering slots (with partitions) that
speeds: 140 rpm for revolving with 62 rpm plane-
open or close by rotation of the inner tube. Outer
tary action and 285 rpm revolving with15 planetary Bowl— stainless steel, 5 qt. (4.73L) H-3841.2
tube has sharp point to facilitate penetration. Sam-
action. This mixer features a heavy-duty design, Wire loop whip— stainless steel H-3841WW pler is 1.375" (35mm) dia. x approximately 63"
which provides excellent stability when placed on
Cage (guard) for bowl, metal H-3841.7 (160cm) long.
a counter top. Provides open mixing bowl for easy
Wire loop whip— SS, Heavy-duty, Tube Sampler with Partitions H-3341
visual consistency control. Simple distance control H-3841HW
between stirrer paddle and mixing bowl maintains 0.25" dia. wire Ship wt. 9.8lbs. (4.4kg)

standard distance between bowl and stirrer. Tube Sampler w/o Partitions, Bulk Cement
Mixer Components for H-3841 ASTM Mixer
ASTM C183; AASHTO T127
Hoisting mechanism can also be used to lower the Humboldt Extreme-Duty Whisk
mixing bowl. Quick-clamping system allows mixing For sampling hydraulic cement in bulk shipments
Custom, hand-made extreme-duty whisk designed
bowl to be attached to the mixer easily. Provided or bulk storage. Has two polished brass telescopic
for use with the H-3841 mixer. Whisk is formed
with standard stainless steel bowl and standard tubes with registering slots (without partitions) that
from 0.25" dia. stainless steel rod for extended
beater. open or close by rotation of the inner tube. Outer
service. Designed to withstand the abuse of mix-
tube has sharp point to facilitate penetration. Sam-
Mortar Mixer, 5L (5.3qt), 120V 60Hz HC-3851 ing heavy-aggregate concrete and asphalt mixes.
pler is 1.375" (35mm) dia. x approximately 63"
Mortar Mixer, 5L (5.3qt), 230V 60Hz HC-3851.2F Whisks are available for other mixers, see page 166
(160cm) long.
Mortar Mixer, 5L (5.3qt), 230V 50Hz HC-3851.5F for information.
Ship wt. 125lbs. (56kg) Tube Sampler without Partitions H-3342
Humboldt Extreme-Duty Whisk H-3841HW
ASTM-Compliant Mixer, 5-Qt. (4.73L) Ship wt. 3lbs. (1.3kg) Ship wt. 10.9lbs. (4.49kg)

ASTM C305; AASHTO T162 Test Sand, ASTM 20-30 Tube Sampler, Packaged Cement
ASTM-compliant mixer for mixing hydraulic ASTM C91, C141, C185, C359, C778; AASHTO ASTM C183; AASHTO T127
cement pastes and mortars of plastic consistency. T132, T137, T185 For sampling hydraulic packaged cement, brass
Mixer includes H-3844 bowl positioning adapter, Sand is specially graded natural silica sand to unit has hardwood handle. Unit is 1.25" (32mm)
a 5-qt. (4.73L) stainless steel bowl and 1 flat, pass a No. 20 (850μ) sieve. Specific gravity is 2.65. dia. x 28.75 (730mm) long.
stainless steel beater for mixing heavy materials. Packed in 50 lb. (22.7kg) bags or boxes Tube Sampler, Packaged Cement H-3340
Hobart model No. N-50 operates on principle of Test Sand, ASTM 20-30, bag H-3820 Ship wt. 1.7lbs. (.77kg.)
planetary action—beater reaches every part of the Test Sand, ASTM 20-30, box H-3820BX
batch, rotating on its axis in opposite directions Ship wt. 55lbs. (24kg)
as it moves around the bowl. Thoroughly blends, Ottawa Test Sand for Cube Molds
mixes and aerates all ingredients for consistent, ASTM C87, C109, C348, C359, C593, C778;
predictable finished batches. Selective agitator AASHTO T71, T106, T185
transmission has 3 speed settings: 139, 285 and
Sand is specially graded natural silica sand graded
591 RPM. Base dimensions: 10.375 x 15" (264 x
to retain 98% on a No. 100 (150μ) sieve, 75% on a
381mm). Height: 17" (432mm). Features UL-listed
No. 50 (300μ) 30% on a No. 40 (425μ) and 2% on a
cord and plug
No. 30 (600μ). Specific gravity is 2.65. Packed in 50
ASTM-Compliant Mixer, 120V 60Hz H-3841 lbs. (22.7kg) bags or boxes.
ASTM-Compliant Mixer, 230V 60Hz H-3841.2F
Ottawa Test Sand, bag H-3825
ASTM-Compliant Mixer, 230V 50Hz H-3841.5F Ottawa Test Sand, box H-3825BX
Ship wt. 55lbs. (25kg)
Ship wt. 53lbs. (24kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

206
Air Entrainment, Flow CEMENT

H-3622
H-3622M

H-3620

H-3621
H-3624F
H-3624

H-2845 H-4144.8
H-2846

Air Entrainment Meters for Mortar cement mortars; consistency tests of magnesium Pedestal Form
EN 1015-7, EN 459-2 oxychloride cements; flexural strength test for Wooden form used to create a concrete base for
Air entrainment meters for testing freshly mixed bond strength or mortar to masonry units. flow tables
mortar with direct readings in percent. Uses Flow Table, w/Counter, 120V 60Hz H-3624 Pedestal Form H-3624F
hand-operated pump. Flow Table, w/Counter, 220V 50Hz H-3624.5F Ship wt. 28lbs. (12.7kg)

Air Entrainment Meter for Mortar, 1L H-2845 Ship wt. 81lbs. (37kg) Flow Molds
Air Entrainment Meter for Mortar, 0.75L H-2846 Flow Table, Motorized Cast-bronze 2.75" top dia. x 4" bottom dia. x 2"
Ship wt. 2.4lbs. (1.08kg) high cone mold or cast-bronze 70mm top dia. x
ASTM C230
Air Meter Accessories Used to determine the flow of hydraulic cement, 100mm bottom x 50mm high. cone mold.
Description Model mortars and cement pastes. A test specimen is Flow Mold, 2.75" / 4"x 2" high H-3622
molded on the table to a specified volume and Flow Mold, 70mm/100mm x 50mm high H-3622M
Filling Hopper (1L & 0.75) H-2845.1 Ship wt. 2.4lbs. (1.08kg)
shape. Then, with the mold removed, leaving the
Transport Box (1L & 0.75) H-2845.2 test specimen on the table. The table is dropped Counter, Automatic
Flow Table, Motorized with Counter and raised (via a hand crank or optional motor) a Can be used to upgrade H-3625 motorized flow
ASTM C87, C109, C110, C185, C230, C243, specified number of cycles, after which the flow (or table so a predetermined number of drops can
C348, C593; AASHTO T71, T106, T137 and T152 increase in average diameter of the specimen) is be set to run automatically. Use H-3614B.4F with
measured. Motorized flow table with 10" (254mm) H-3625.5F.
Used to determine the flow of hydraulic cement,
mortars and cement pastes. A test specimen is dia. cast-bronze table/platen. Includes heavy- Counter, Automatic, 120V 60Hz H-3614B
molded on the table to a specified volume and duty table/platen assembly, standard H-3622 cast Counter, Automatic, 220v 50Hz H-3614B.4F
bronze, 2.75" top dia. x 2" high x 4" bottom dia. Ship wt. 4lbs. (1.8kg)
shape. Then, with the mold removed, leaving the
test specimen on the table. The table is dropped cone mold, and motor. Designed to be mounted Caliper, Mortar Diameter Check
and raised (via a hand crank or optional motor) a to concrete mounting block. Order H-3624F, ASTM C87, C185, C230; AASHTO M152, T71, T137
specified number of cycles, after which the flow (or pedestal form and easily create your own mount- Rugged caliper used to measure mortar flow diam-
increase in average diameter of the specimen) is ing block. Used in determining consistency of eter and indicate the + percentage of flow.
measured. Motorized flow table with 10" (254mm) cement mortars. Caliper, Mortar Diameter Check H-3621
dia. cast-bronze table/platen and automatic Flow Table, Motorized, 120V 60Hz H-3625 Ship wt. 2lb. (0.9kg)

digital counter. Motor stops automatically once Flow Table, Motorized, 220V 50Hz H-3625.5F Mortar Flow Shield
pre-set number of drops is achieved. Includes Ship wt. 80lbs. (36kg) ASTM C230; AASHTO M152
heavy-duty table/platen assembly, standard Flow Table, Hand-Driven Circular shield for use with H-3622 flow mold to
H-3622 cast bronze, 2.75" top dia. x 2" high x ASTM C230 prevent mortar from spilling on table top.
4" bottom dia. cone mold, motor and H-3614B Hand-driven flow table with 10" (254mm) dia. cast- Mortar Flow Shield H-3623
counter. Designed to be mounted to concrete bronze table/platen. Includes standard H-3622 Ship wt. 2lbs. (0.9kg)
mounting block. Order H-3624F, pedestal form cast bronze, 2.75" top dia. x 2" high x 4" bottom Straight Edge
and easily create your own mounting block. dia. cone mold. Used in determining consistency ASTM C185, D558, D559, D560, D698; AASHTO
Applications include: compression strength and of cement mortars. T137.
air content tests of cement mortar; flow tests of
Flow Table, Hand-Driven H-3620 Straight edge of ground steel with beveled edge.
hydraulic
Ship wt. 27lbs. (12.2kg) .125" x 1.25" x 8" (3 x 32 x 200mm)
Straight Edge H-4144.8
Ship wt. 0.9lbs. (0.9kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 207
CEMENT Flow Properties

H-2903 (set)

H-2904
H-2838
H-2834

H-2901

H-2905.3
HC-2834S
H-2905.2
H-2833
H-2902 H-2905.1
H-2834SSB

Grout Flow Cone Set Beaker, 6-liter Stainless Steel Micrometer Depth Gauge
ASTM C939 6-liter stainless steel beaker with rolled-top edge, Graduations in the thousandths of an inch (.001"),
Test set for measuring the flow of grout for pre- perfect for grout flow testing. Cleans up with ease. range 0 to 3", .125" rod dia. Sleeve is designed
placed, aggregate concrete. Intended for neat Beaker, 6-liter Stainless Steel H-2834SSB with staggered lines, hardened and precision
grout and grouts containing fine aggregate capa- Ship wt. 2.8lbs. (1.27kg) ground screw; lock nut holds the setting at the pre-
ble of passing a No. 8 sieve and grouts which cise measurement. Includes protective case. Base
Grout Boxes
have an eflux time of less than 35 seconds. Kit length is 2.5".
ASTM C1019
includes: (1) H-2834 0.5" (13mm) or 0.75" (19mm) Micrometer Depth Gauge H-2902
Cardboard box designed to be used to mold grout
interchangeable orifice flow cone and adjustable Ship wt. 2lbs. (.9kg)
test samples. Each box forms 4 molds and can be
point gauge assembly, (1) H-2833 stand, and (1) Micrometer Bridge
used as a transport/shipping container as well.
H-2834SSB stainless steel, 6 liter beaker. Bridge is used to hold the H-2904 mold in place
Boxes yield consistent, identical prism samples,
Grout Flow Cone Set, 0.5" (13mm) HC-2834S while the engineered, slotted corrugation retains while repeated volume change measurements are
Grout Flow Cone Set, 0.75" (19mm) HC-2835S moisture while closely simulating CMU absorption made. Stainless Steel.
Ship wt. 30lbs. (13.6kg) rates. 25 boxes to a package. Overall dimensions: Micrometer Bridge H-2901
Grout Flow Cone 7.5" x 7.5" x 7" (190 x 190 x 178mm). Section: Ship wt. 7lbs. (3.1kg)
ASTM C939 3.25" x 3.25" x 6.75" (83 x 83 x 171mm) Tamping Rod
Cast-aluminum flow cone with either 0.5" (13mm) Grout Boxes (package of 25) H-2838 ASTM C157, C192
or 0.75" (19mm) replaceable orifice. Includes Ship wt. 17.3lbs. (7.84kg) Round, straight steel rod is .375" (10mm) dia. x 12"
adjustable point gauge assembly. Overall dimen- Micrometer Bridge Set (305mm) long. Both ends are rounded to a hemi-
sions: 8" dia. x 12"H (203 x 305mm). Designed to hold one cylinder to permit repeated spherical tip of the same diameter as the rod.
Grout Flow Cone, 0.5" (13mm) H-2834 volume change measurements without moving or Tamping Rod H-2905.1
Grout Flow Cone, 0.75" (19mm) H-2835 disturbing the specimen. Includes the following Ship wt. 4.5lbs. (2.04kg)
Ship wt. 10lbs. (4.5kg) items: H-2901 micrometer bridge, H-2902 microm-
Glass Plate
Grout Flow Orifice, Replacement eter depth gauge, H-2904 tapered cylinder mold,
Glass plate used with micrometer bridge setup
ASTM C939 H-2905.2 tamping rod, H-2905.2 glass plate and
H-2905.3 weight. Glass Plate H-2905.2
Grout flow orifice with either 0.5" (13mm) or 0.75"
Ship wt. 0.4lbs. (0.18kg)
(19mm) opening. Micrometer Bridge Set H-2903
Ship wt. 23.4lbs. (10.6kg) Weight, 3 lb
Grout Flow Orifice, 0.5" (13mm) H-2834.500
3 lb weight for use with micrometer bridge setup
Grout Flow Orifice, 0.75" (19mm) H-2834.750 Tapered Cylinder Mold
ASTM C1090 Weight, 3 lb H-2905.3
Ship wt. 1lb. (0.45kg)
Ship wt. 3lbs. (1.4kg)
Grout Flow Cone Stand Used to determine volume change of grout, mold
Sturdy well-constructed steel stand to support flow is constructed of steel tubing 0.25" wall x 3" dia. x
cones so the top is level and the cone free from 6"H (6 x 76 x 152mm). Mold is split longitudinally
vibration. Overall dimensions: 21"W x 9.5"D x with two quick-acting clamps welded to the mold.
23"H. Top edge of mold is machine tapered to a narrow
rim. Includes detachable base plate.
Grout Flow Cone Stand H-2833
Ship wt. 9.5lbs. (4.3kg) Tapered Cylinder Mold H-2904
Ship wt. 7.8lbs. (3.5kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

208
Organic Impurities, Calorimeter CEMENT

H-3320 H-3493A

H-3162.5F

H-3161
H-3491
H-3492A H-3490A

Reaction Container Graduated Bottle Calorimeter

ASTM C289 12 oz. (.35L) graduated bottle for organics impu- EN 196-9
For determining potential alkali reactivity of aggre- rities test. Used to measure the heat of hydration of cement
gates (chemical method) when used with high Graduated Bottle H-3490A by the semi-automatic Langavant method. Test
alkali cements. Stainless steel unit is 2" dia. x 2.25" Ship wt. 0.8lbs. (0.3kg) calorimeter includes factory calibration certificate.
high (51mm dia. x 57mm) fitted with air-tight cover. Organic Color Wheel Temperature recorder provides (4) input channels
50-75ML capacity. ASTM C40; AASHTO T21 for recording and transmission of temperature
Reaction Container H-3320 values. Analysis software provides reporting and
Color comparison wheel for use with organic
Ship wt. 1.3 lbs. (0.56kg) editing function for calculating the heat of hydra-
impurities test. Color wheel has five different
tion. Unit includes: test calorimeter; reference cal-
Organic Impurities Test Set color filters to compare to test solution.
orimeter; mortar-sample container, temperature
ASTM C40; AASHTO T21 Organic Color Wheel H-3492A
recording device and analysis software. Power for
Determines presence of injurious organic com- Ship wt. 0.6lbs. (.27kg)
unit is supplied by USB from a PC or laptop. Does
pounds in sands used in cement mortar or con- Cement Calorimeter, Digital not include required PC.
crete. Test serves as warning that further tests of ASTM C186
sands are necessary before they can be approved Calorimeter, 220V, 50Hz H-3162.5F
Features precision digital thermometer for deter- Ship wt. 77lbs. (35kg)
for use. Air shipments must meet Dangerous
mining heat of hydration of cements by measuring
Goods requirements because of Sodium Hydrox-
difference between heat of solution of dry cement
ide Beads. Order H-3493X without Sodium
and heat of solution of a separate sample partially
Hydroxide Beads to avoid Dangerous Goods
hydrated for 7 to 28 days. Constant-speed stirrer
requirements.
maintains uniform temperature throughout liq-
Organic Impurities Test Set H-3493A uid and supplies sufficient agitation to keep solid
Test Set, w/o Sodium Hydroxide H-3493AX reactant suspended in the acid mixture. Includes
Ship wt. 6.8lbs. (3kg) insulated wood case, insulated 1G (3.8L) can; 1 pt.
Sodium Hydroxide Beads (0.47L) vacuum jar with stopper; 2-channel, Preci-
1lb (454g) Container of Sodium Hydroxide Beads. sion Digital Thermometer; plastic funnel; stirring
Air shipments must meet Dangerous Goods paddle and chuck; geared synchronous motor.
requirements. Cement Calorimeter, Digital, 120V 60Hz H-3161
Sodium Hydroxide Beads H-3491 Cement Calorimeter, Digital, 230V 50/60Hz H-3161.4F
Ship wt. 1.5lbs. (.68kg) Ship wt. 35lbs. (15.8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 209
CEMENT Gillmore, Water Retention, Bleeding

H-3631 H-3630.3

H-3630.18

H-3150
H-3630.21

H-3151
H-3630.4
H-3630A
H-3152

H-3152.4
H-3154 H-3600

H-1763A

Gillmore Apparatus Water Retention Apparatus Cement Bleeding Apparatus

ASTM C91, C141, C150, C266, C414; ASTM C1506, C110, C207 and E149 ASTM C243
AASHTO T154 The apparatus is used in specification tests of Used to determine bleeding rate and bleeding
Used to determine initial and final set times of Port- masonry cement and physical testing of quicklime capacity of cement paste and mortar by direct
land cement, masonry cement, hydraulic hydrated and hydrated lime. Unlike older models, this unit and continuous procedure. Includes noncorro-
lime and certain mortars. Comprised of two stain- incorporates a vacuum regulator and gauge sys- sive metal container for paste or mortar, collect-
less steel needles with 0.0375" (4.8mm) cylindrical tem in place of the old mercury manometer and ing ring, support stand and necessary glassware.
flat-end needles. One is 1/12" (2.12mm) dia. 1/4lb. relief column. The complete unit consists of an Rubber-covered double V-jaw burette clamp holds
(113.4g) weight for initial set. The second is 1/24" aspirator pump, vacuum regulator, vacuum gauge, stopcock in position; single rubber-covered jaw
(1.06mm) dia., 1lb (453.6g) weight for final set. three-way stopcock, flask, rubber gasket, brass clamp supports the burette and funnel assembly.
Gillmore Apparatus H-3150 funnel, perforated brass dish, filter paper and hard- Cement Bleeding Apparatus H-3600
Ship wt. 5.7lbs. (2.5kg) wood stand. Ship wt. 16lbs. (7.2kg)
Water Retention Apparatus H-3630A
Gillmore Accesssories and Replacement Parts
Ship wt. 25lbs. (11.3kg)
Description Model
Water Retention Apparatus Replacement Parts
Strike-off plate, 0.5" thickness H-3154
Description Model
Needle, 1/24" (1.06mm) dia.
H-3151 Funnel H-3630.3
with 1lb (453.6g) weight
Stopcock H-3630.4
Needle, 1/12" (2.12mm) dia.
H-3152
with 1/4lb. (113.4g) weight Rubber gasket H-3630.18
Gillmore needle, 0.050" dia. H-3152.4 Filter paper, 15cm,
H-3630.21
package of 100
Perforated brass dish H-3631
Flask, 1000ml H-4913.1M
Vacuum Pump H-1763A
Drierite Air Drying Unit H-1759

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

210
Blaine CEMENT
Blaine Air Permeability (H-3810) Replacement Parts

H-3812
H-3813B
H-3816.1M
H-3810

H-3814

H-3811
H-3817 H-3817.20

Blaine Semi-Automatic Apparatus (H-3056.3F) Replacement Parts

H-3056.3F
3056.3F

H-3056.11
H-3056.1

H-3056.4 H-3056.2
H 3056 2

Blaine Air Permeability Apparatus

ASTM C204; AASHTO T153 Blaine Apparatus, Semi-Automatic Electronic Blaine Apparatus, Dyckerhoff
ASTM C204; AASHTO T153, EN 196; DIN 1164; (see next page)
Determines fineness of Portland cement in terms
of specific surface expressed as total surface area BS 4550 The Electronic Blaine Apparatus, Dyckerhoff sys-
in square centimeters per gram of cement. Con- Determines fineness of cement in terms of spe- tem is a semi-automatic device with pump and
sists of: calibrated U-tube manometer, ground cific surface expressed as total surface area square time registration for the rapid determination of
glass joint, stainless steel test cell and plunger, centimeters per gram. To obtain the most accurate specimen characteristics. This device is a semi-au-
rubber aspirator bulb and perforated disc. results, the test should be performed in a tem- tomatic cement air permeability tester used for
Includes 8 oz (226.8g) bottle of red manome- perature-controlled environment. The Semi-auto- the determination of the specific surface or Blaine
ter fluid, filter paper, wood block for holding matic Blaine Apparatus provides more accuracy value. Once the test material is set inside the cham-
test cell during filling and funnel. Mounted on and precision than provided by the manual Blaine bers, the test procedure is able to measure the val-
finished wood panel with rubber-footed base. Apparatus. The device uses an automatic pump ues for the user. Measuring cell dia. is 41 mm (1.6").
and timer to evaluate the time precisely. Calibra- Volume of measuring cell is 73 cm3. Unit includes
Blaine Air Permeability Apparatus H-3810
tion of this unit is done using a cement sample apparatus, measuring cell, filter papers ø41mm
Ship wt. 7lbs. (3.1kg)
reference, such as NIST 114q. To obtain the most 500pk, fill oil 150ml, tamper and dust filterø13mm..
H-3810 Accessories & Replacement Parts
accurate results, the test should be performed Electronic Blaine Apparatus, Dyckerhoff H-3058.3F
Description Model in a temperature controlled environment. Unit Ship wt. 5lbs. (2.2kg)
Rubber bulb H-3811 includes: the unit with an electric pump and timer; PC-Controlled Blaine Apparatus, Dyckerhoff
Cell and plunger H-3812 measuring cell, filter papers ( 12.8mm, 1000pk; fill (see next page)
oil (50ml); plug; thermometer; brush and funnel.
Cell and plunger, Calibrated H-3812CAL The PC-controlled, electronic Blaine Apparatus,
Blaine Apparatus,Semi-Automatic H-3056.3F Dyckerhoff system provides a fully automatic test
Perforated brass disc H-3813B Ship wt. 15lbs. (6.8kg) procedure and evaluation, complete with soft-
Perforated stainless steel disc H-3813S ware, for one cell. Once the test material is set
H-3056.3F Accessories & Replacement Parts
Manometer fluid, 8oz (240ml) H-3814 inside the chambers, the test procedure is able
Description Model
to measure the values for the user. This device
Monometer u-tube, calibrated H-3815
Calibration Sand, Coarse H-3056.2 provides quick test preparation, which does not
Filter paper discs, medium require the operator to determine the weighed
H-3816.1M Calibration Sand, Fine H-3056.4
retentive, 1.27cm, pkg 1000 quantity, as precise as he would for the standard
Fill Oil H-3056.5
procedure. After test preparation, the device can
SRM 114q - Portland Cement Fineness Standard Light Grease H-3056.10 perform the test in full automation, recording all
This Standard Reference Material (SRM) is used in U-shaped Tube H-3056.6 information without need of supervision Software
calibrating fineness testing equipment according to automatically records all information without need
Filter Papers, 12.8mm (1000) H-3056.1
ASTM Standard Methods. The SRM unit consists of of supervision. Apparatus and software are able to
a glass vial with plastic caps containing powdered Measuring Cell H-3056.11
measure the final result for the user. Measuring cell
cement (each vial is contained in a sealed foil bag). Perforated Disc H-3056.8 dia. is 41 mm (1.6"). Volume of measuring cell is
Each vial contains approximately 5g of cement. approximately ca. 75 cm3. Comes complete with
Tamper H-3056.13
SRM 114q, 1 vial H-3817 apparatus, measuring cell, filter papers ø41mm
SRM 114q, package of 20 H-3817.20 500pk, fill oil 150ml, tamper and dust filter ø13mm.
Ship wt. 0.5lbs. (0.2kg) Does not include required PC.
PC-Controlled Apparatus, Dyckerhoff H-3059.3F
Ship wt. 47lbs. (21.3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 211
CEMENT Blaine Dykerhoff, Vicat Testing

H-3059.3F
H-3052
HA-3056
H-3058.3F

HA-3056 Accessories, Spare Parts The Vicatronic is supplied with firmware that allows
the automatic performance of tests in accordance
Description Model
with the following standards: ASTM C191, AAS-
Initial set needle, 1.13mm dia. HTO T131, EN 196/3, DIN 1164, DIN 1168 gyp-
HA-3056.2
x 57mm length sum, NF P15/431 and BS4550. Additional pro-
Final set needle with special grams can be developed by the operator. This is
HA-3056.5
foot, 1.13mm dia. particularly useful when testing new mortars, addi-
H-3058.1
Vicat mold, 70/80 dia. x 40mm tives or research tests requiring sophisticated and
HA-3056.6
(EN 196, ASTM C187-191) flexible applications.
H-3058, H-3059 Accessories & Replacement Parts
Plotting Paper (500 sheets) HA-3056.1 The Vicatronic is supplied complete with the inte-
Description Model gral printer, two hardened needles (one with 1mm
Recording Pen (1) HA-3056.3
Reference Sand, Coarse, 600g H-3058.7 diameter and one with 1.13mm. diameter), two
Sample Container (140 x 60mm) HA-3056.8 conical molds EN and ASTM, and a glass plate to
Reference Sand, Fine, 600g H-3058.8 hold the conical mold. Dimensions: 15.75" x 7.87"
Glass Base Plate HA-3056.7
Fill Oil H-3056.5 x 18.5” (400 x 200 x 470mm).
Cleaning Strip for Needle HA-3056.4
Light Grease H-3056.10 Vicat Machine, Automatic, 120V 50/60Hz H-3052
Vicat Machine, Automatic, 230V 50/60Hz H-3052.4F
U-shaped Tube H-3056.6 Ship wt. 37.6lbs. (17kg)
Vicat Machine, Automatic
Filter Papers, 41mm (500) H-3058.1 ASTM C187, C191; AASHTO T131; EN 196-3;
H-3052 Accessories, Spare Parts
Foam Plugs, dust filters (10) H-3058.5 DIN 1164, DIN 1168 gypsum; NF P15/431 and
Precision Digital Gauge H-3059.6 BS4550 Description Model

O-ring H-3058.2 The Vicatronic apparatus provides a completely Needle 1.13mm dia., EN 196-3 H-3052.2
automatic method for determining the initial and Needle 1mm dia., ASTM C191 H-3052.9
Perforated Disk, 30 x 7mm H-3058.4
final setting time of cements or mortar pastes. The
Weight, 700g H-3052.45
automated test operation provides for precise and
repeatable results, which are automatically printed Mold tank, in-water testing H-3052.3
Vicat Apparatus, Automatic out from the integral printer built into the appara- Printer paper (5 rolls) H-3052.6
ASTM C187, C191, AASHTO T131, EN 196-3, tus. The Vicatronic can also be connected to a PC
DIN 1164, DIN 1168 gypsum, NF P15/431 and via a RS232 cable allowing data to be downloaded Vicat-Win Software
BS4550 via programs like Microsoft hyper terminal. The Allows the receiving, managing, processing and
This automatic Vicat Apparatus provides a com- Vicat-Win software (H-3052.4) allows the receiving, completion of test data on a PC. This software can
pletely automatic method for determining the managing, processing and completing test data; automatically create graphs, personalize them and
initial and final setting time of cements or mortar the software can automatically create graphs, per- print test reports.
pastes. sonalize them and print test reports. Vicat-Win Software H-3052.4
Ship wt. 0.1lbs. (0.04kg)
The HA-3056 is supplied complete with a 1.13mm The Vicatronic has a large high-contrast, high-res-
x 57mm needle; a vicat mold 70/80 dia. x 40mm olution LCD display, which shows the test data
height; sample container (water bath); 500 sheets together with the general functions of the unit.
of plotting paper; final set needle; cleaning strip; The easy-to-see menu provides a simplified guide
tweezer, T-wrench and delay timer. to running a test. During the test, the display also
Vicat Apparatus, Auto, 120/220V 50/60Hz HA-3056.3F provides a real-time graph of the results, which can
Ship wt. 37lbs. (17.6kg) be monitored.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

212
Vicat Testing CEMENT

HC-3058.3F
HC-3059.3F
HC-3057.3F

Vicat Apparatus, 6-Station, Computer Controlled Vicat Apparatus, 8-Station, Computer Controlled entire sequence. The supplied plunger and needle
ASTM C191 Method B; AASHTO T131; EN 196-3, ASTM C191 Method B; AASHTO T131; EN 196-3, weigh 300g ±1g and after each penetration the
EN 480-2; DIN 1164; BS4550 EN 480-2; DIN 1164; BS4550 vicat needle is automatically cleaned.
Computer-controlled Vicat needle apparatus Eight (8)-station version of the computer-controlled The computer-controlled vicat apparatus with inte-
with six (6) test stations positioned in a rectangu- vicat apparatus. See previous listing (H-3057.3F) gral stainless steel bench includes: Base appara-
lar water bath. The Computer-controlled, Vicat for information. The computer-controlled vicat tus unit is built into a stainless steel bench with a
Apparatus can be used to determine the initial and apparatus includes: Base unit as a table model control unit and standard software for performing
final setting time of cement, mortar pastes and apparatus with a control unit and standard software programmable test sequences and for data record-
gypsum. This six-station apparatus automatically for performing programmable test sequences ing. Includes: (12) vicat molds (60/70 dia. x 40 mm
monitors the setting process and provides output and for data recording. Includes: (8) vicat molds conical hard-plastic rings); (12) glass base plates
curves of the process. The test sequence is pro- (60/70 dia. x 40 mm conical hard-plastic rings); (120 mm dia.); (12) centerings for the vicat molds;
grammable and tests can be performed in air or in (8) glass base plates (120 mm dia.); (8) centerings 1 pair of cleaning brushes; (1) t-wrench (1.25 mm);
the supplied, temperature-controlled water bath. for the vicat molds; 1 pair of cleaning brushes; (1) (1) t-wrench (2 mm); (2) spare glass plates (120 mm
With programmed test sequences, the unit pro- t-wrench (1.25 mm); (1) t-wrench (2 mm); (2) spare dia.); (2) spare initial-set needles, (1.0 mm dia.);
vides automatic registration of initial set and final glass plates (120 mm dia.); (2) spare initial-set nee- Filter sponge (coarse);·Filter sponge (fine); serial
set times, as well as providing setting plots of the dles, (1.0 mm dia.); Filter sponge (coarse);·Filter cable, USB/RS232 adapter and power supply.
entire sequence. The supplied plunger and needle sponge (fine); serial cable, and cover. PC or laptop Standard PC or laptop required for operation–
weigh 300g ±1g and after each penetration the required for operation– not included. not included.
vicat needle is automatically cleaned. Vicat Apparatus, 8-Station, 120/220V 50/60Hz HC-3058.3F Vicat Apparatus, 12-Station, 120/220V 50/60Hz HC-3059.3F
The computer-controlled vicat apparatus includes: Ship wt.115lbs. (52kg) Ship wt.115lbs. (52kg)
Base unit as a table model apparatus with a con- Vicat Apparatus, 12-Station, Computer Controlled
trol unit and standard software for performing HC-3057, HC-3058 & HC-3059 Spare Parts
ASTM C191 Method B; AASHTO T131; EN 196-3,
programmable test sequences and for data record- EN 480-2; DIN 1164; BS4550 Description Model
ing. Includes: (6) vicat molds (60/70 dia. x 40 mm
Computer-controlled Vicat needle apparatus with Needle 1.13mm dia., EN 196-3 HC-3057.13
conical hard-plastic rings); (6) glass base plates
twelve (12) test stations positioned in a rectangu- Needle 1.0mm dia., ASTM C191 HC-3057.14
(120 mm dia.); (6) centerings for the vicat molds;
lar water bath, which is built into a stainless steel
1 pair of cleaning brushes; (1) t-wrench (1.25 mm); EN ring ø70/80 x 40mm HC-3057.02
workbench. The Computer-controlled, Vicat Appa-
(1) t-wrench (2 mm); (2) spare glass plates (120 mm ASTM ring ø60/70 x 40mm HC-3057.03
ratus can be used to determine the initial and final
dia.); (2) spare initial-set needles, (1.0 mm dia.);
setting time of cement, mortar pastes and gypsum. Glass plate, 120mm HC-3057.07
Filter sponge (coarse);·Filter sponge (fine); serial
This 12-station apparatus automatically monitors
cable, and cover. PC or laptop required for oper- Cleaning brushes, 1 pair HC-3057.08
the setting process and provides output curves of
ation– not included. 700g weight for EN 480-2 HC-3057.10
the process. The test sequence is programmable
Vicat Apparatus, 6-Station, 120/220V 50/60Hz HC-3057.3F and tests can be performed in air or in the sup-
Ship wt.115lbs. (52kg) plied, temperature-controlled water bath. With
programmed test sequences, the unit provides
automatic registration of initial set and final set
times, as well as providing setting plots of the

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 213
CEMENT Vicat Testing

H-3135

H-3137
H-3090 H-3134
H-3060

H-3085 H-3120
H-3050
H-3133

Vicat Consistency Apparatus with bakelite platform, plunger assembly with Modified Vicat Cone Penetrometer, 35g
ASTM C91, C141, C187, C191, C308, C451, adjustable indicator and H-3086 brass ring mold ASTM C472
C472; AASHTO T129, T131, T186 (76mm ID x 40mm). Used to evaluate unsanded plaster. Features a
Reversible stainless steel plunger with 10mm dia. Vicat Apparatus, Set Time & Consistency H-3085 magnesium cone and plunger assembly with a
on one end and threaded, H-3070 1mm dia. stain- Ship wt. 4.7lbs. (2.1kg) total weight of 35g. Includes frame with bakelite
less steel needle on the other. Weight of plunger Vicat Consistency Apparatus, Modified. 50g platform, graduated 0-50mm scale, magnesium
assembly with adjustable indicator is 300g total. ASTM C110 cone plunger assembly with adjustable indicator
This includes the 1mm stainless needle. Graduated Modified consistency vicat apparatus with 19mm and H-3080 conical mold
0-50mm scale. Includes frame with bakelite plat- dia. aluminum plunger on .25" rod. Weight of Modified Vicat Cone Penetrometer, 35g H-3135
form, graduated 0-50mm scale, reversible plunger plunger assembly with adjustable indicator is 50g Ship wt. 6.8lbs. (3kg)
assembly with H-3070 1mm diameter stainless total. Includes graduated 0-50mm scale, frame Modified Vicat Cone Penetrometer, 50g
steel needle, H-3080 conical mold and H-3049 with bakelite platform, plunger assembly, H-3080 ASTM C472
glass plate. conical mold and H-3049 glass plate. Used to evaluate unsanded plaster. Features a
Vicat Consistency Apparatus H-3050 Vicat Consistency Apparatus, Modified, 50g H-3090 magnesium cone and plunger assembly, which
Ship wt. 5lbs. (2.2kg) Ship wt. 5lbs. (2.7kg) includes a 15g weight for a total plunger weight of
Vicat Apparatus, Modified, 400g Vicat Consistency Apparatus, Modified, 30g 50g. Includes frame with bakelite platform, grad-
ASTM C1191, AASHTO T131, EN196/3 ASTM C110 uated 0-50mm scale, magnesium cone plunger
Modified vicat apparatus with 10mm dia. plunger Modified consistency vicat apparatus with 12.5mm assembly with weight and adjustable indicator and
and H-3061 100 gram weight. Weight of plunger dia. aluminum plunger on .25" rod. Weight of H-3080 conical mold
assembly with adjustable indicator is 400g total. plunger assembly with adjustable indicator is 30g Modified Vicat Cone Penetrometer, 50g H-3137
Includes graduated 0-50mm scale, frame with total. Includes graduated 0-50mm scale, frame Ship wt. 4lbs. (1.8kg)

bakelite platform, plunger assembly, H-3080 con- with bakelite platform, plunger assembly, H-3080 Modified Vicat Cone Penetrometer, 200g
ical mold and H-3049 glass plate. conical mold and H-3049 glass plate. ASTM C780, C185
Vicat Apparatus, Modified, 400g H-3060 Vicat Consistency Apparatus, Modified, 30g H-3120 Used to evaluate unsanded plaster. Features an
Ship wt. 4.6lbs. (2kg) Ship wt. 10lbs. (4.5kg) aluminum cone, 1.625" x 3.625" (41.3 x 92.08mm)
Vicat Apparatus, Set Time & Consistency Modified Vicat Cone Penetrometer, 100g and blunted to a hemisphere a distance of .125"
ASTM C807 American Dental Association (3.2mm) for an overall length of 3.5" (88.9mm)
Designed to switch between 17.5mm dia. plunger Features a 35g magnesium cone with a 65g and plunger assembly with adjustable indicator.
for consistency determinations and a 2mm dia. brass weight for a total plunger weight of 100g. Total plunger weight is 200g. Includes frame with
needle for time of set determinations. Plunger Includes frame with bakelite platform, graduated bakelite platform, aluminum cone plunger assem-
assembly with adjustable indicator weighs 400g 0-50mm scale, magnesium cone plunger assembly bly with adjustable indicator and H-3840 400ml
with 17.5mm needle attached and 300g with 2mm with adjustable indicator, 65g weight and H-3080 brass measure cup as specified for ASTM C185.
needle. Includes graduated 0-50mm scale, frame conical mold Modified Vicat Cone Penetrometer, 200g H-3133
Ship wt. 7lbs. (3.1kg)
Modified Vicat Cone Penetrometer, 100g H-3134
Ship wt. 6.8lbs. (3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

214
Vicat Testing CEMENT

H-3080
H-3086

H-3065
H-3049

H-3136

H-3110 H-3130 H-3134.1 H-3135.1 H-3137.1

H-3055 H-3060.1
H-3138 H-3085.1

H-3840 H-3072M
H-3070, H-3072
Conical Mold, Plastic
Plastic mold, 70mm bottom dia. x 60mm top dia. H-3147 H-3075, H-3073
x 40mm high. For use with all Vicat apparatuses.
Conical Mold, Plastic H-3080 Replacement Plunger Assemblies Vicat Plunger
Ship wt. 0.6lbs. (0.2kg) Plunger assembly: plunger, needle and indicator, 300g H-3050 H-3055
Mold, Brass Plunger assembly: plunger, weight and indicator, 400g H-3060 H-3060.1
Brass mold, 76mm dia. x 40mm high. For use with
Plunger assembly: plunger and indicator, 300g H-3085 H-3085.1
H-3085 vicat apparatus.
Mold, Brass H-3086 Plunger assembly: plunger, needle, weight and indicator H-3090 H-3110
Ship wt. 0.5lbs. (0.2kg)
Plunger assembly: plunger, needle, weight and indicator H-3120 H-3130
Mold Container Plunger assembly: plunger, cone, weight, indicator, and (2) bushings H-3134 H-3134.1
ASTM C359
Plunger assembly: plunger, cone, indicator and (2) bushings H-3135 H-3135.1
Mold for use in false set test. 2" x 2" x 6" (51mm x
51mm x 152mm) Overall length including base is Plunger assembly: plunger, cone, weight, indicator and (2) bushings H-3137 H-3137.1
9.25" (235mm). Plunger assembly: plunger, cone and indicator H-3133 H-3133.1
Mold Container H-3065
Ship wt. 1lbs. (0.4kg) Needles Vicat Needle

Glass Plate 1mm dia. stainless steel with knurled threaded holder H-3070
Glass plate, 4" x 4" x .1375" (101.6mm x 101.6mm 1.13mm dia. stainless steel with knurled threaded holder H-3072
x 4.8mm). For use with H-3050, H-3060 and H-3090 Initial set needle, 1.13mm dia. x 45mm, BS EN 196-3. H-3072M
vicat apparatus. H-3050
Final set needle, 1.13mm dia., BS EN 196-3. H-3073
Glass Plate H-3049 H-3085
Ship wt. 0.4lbs. (0.1kg) Initial and final set needle, ASTM C191 H-3075
Measure, 400ml 2mm dia., stainless steel vicat needle H-3147
ASTM C185, C780; AASHTO M152
17.5mm dia., stainless steel vicat needle H-3085.1.1
Calibrated to 400ml, this measure is used to determine
air content of hydraulic cement mortar. Cylindrical with Weights Vicat Weight
3" (76mm) ID, approximately 3-15/32" (88mm) depth. 100g weight replacement for H-3060 H-3060 H-3061
Measure, 400ml H-3840 100g weight, increases H-3090 to 150g H-3090 H-3100
Ship wt. 2.3lbs. (1.04kg)
100g weight replacement for H-3137 H-3137 H-3136
65g weight replacement for H-3134 H-3134 H-3138

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 215
CEMENT Compression Testing, Vibration Table

HC-3253.5F
HC-3

HC-3254.5F
H

HC-2820.5F

Cement Compression/Flexural Machine HCM-1000 Series Compression Machines Vibrating Table, 3-gang Molds
ASTM C109; EN 196-1,459-2,1744-1,1015- ASTM C39, ASTM C78, ASTM C293, ASTM C469, EN 196-1, BS 4550
11,13459-2; BS 3892-1, 4554-1 ASTM C496, ASTM C1019, ASTM C109/C109M, Required for compaction of 40 x 40 x 160mm sam-
This fully-automatic, Servo-hydraulic cement com- BS EN 12390-3 ples for EN 196-1 and BS 4550 standards. It can be
pression and flexural machine has been designed The HCM-1000 has been custom-configured to be ordered with either a fast-action clamp fitting or a
according to the EN196-1 and ASTM C109 stan- used for mortar applications like 2" and 4" cubes, general-purpose clamp fitting for (1) 3-gang mold
dards for testing the compression and flexure of beams and other low-strength materials, below for 40 x 40 x 160mm samples. The vibrating plate
mortar prisms and cubes. The machine features a 100,000 lbs. (445kN). These machines are based on is 400 x 300 mm in size and is built into a pow-
very rigid, two-column frame, automatic closed- HCM-2500 frames, which have been reconfigured der-coated steel cabinet. The power switch box is
loop, PID-controlled, servo-hydraulic power pack for accurate readings of lower-strength materials. mounted on a post attached to the top of the cab-
and LCD, graphic digital control and readout. The machines are sold without platens, so be sure inet. Oscillation frequency is 50Hz with a sinusoidal
Machine speed can be adjusted from 0.05 kN/sec to order the appropriate set for your applications. waveform digital timer. Peak-to-peak value is 0.75
to 20 kN/sec. ± 0.05mm. Note: A total vibrating mass of 35.0
• Custom-configured for mortar applications like
Controller Features +/- 1.5 kg acc. to EN 196-1:2005 can only be
2" and 4" cubes
guaranteed by utilizing the precision three-gang
Controller is designed to control the machine and • 1,000 to 100,000 (11 to 445kN) testing range
mold with feeding hopper listed below.
provide data acquisition from load cells or pressure with accuracy of ±5% of indicated load
transducers installed on the compression machine Vibrating Table, Fast-action Clamp, 230V 50Hz HC-3253.5F
• Machine comes with no platens, order the Ship wt. 552lbs. (250kg)
frame. Easy-to-read LCD graphics display and
appropriate set for your applications
touch-button data pad keys make the unit quick Vibrating Table, General Clamp, 230V 50Hz HC-3254.5F
• Mounting stand: OPTIONAL, order: HCM-0200 Ship wt. 552lbs. (250kg)
and straight forward to operate. All interactions
with the measuring system are via the front control Specification Value Precision, 3-gang Mold
panel by using simple menu-driven procedures. Vertical Opening 19.375" (492mm) EN 196
The controller provides real-time load vs. time Horizontal Opening 9.25" (235mm) For use with vibrating table above. 40.1 x 40 x
graph. At the end of the test cycle, the results can Piston Stroke 2.5" (63.5mm) 160mm. Polished bright surface with numbered
be stored in the large memory or downloaded to Lower Platen NA webs and nutplates. electroless nickel finish.
a PC. Dedicated software package is available for Upper Platen, Dia. NA Precision, 3-gang Mold HC-3253.1
further data processing data base management Oil Reservoir Cap. 2 gal (7.6 liter) Ship wt. 1.4lbs. (0.63kg)
and printing. Overall Width 30" (762mm)
Feeding Hopper for 3-gang Mold
Compression/Flexural Machine, 230V 50Hz HC-2820.5F Overall Depth 23.750" (603mm)
EN 196
Ship wt. 959lbs. (435kg) Overall Height 60.625" (1540mm)
Feeding hopper for 3-gang mold and vibrating
See Page 166 for models and ordering information. table.
HCM-1000 Series Compression Machines
Ship wt. 610lbs. (277kg) Feeding Hopper, 3-gang Mold HC-3253.2
Ship wt. 1.4lbs. (0.63kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

216
Cube Testing CEMENT

H-2810
H-2808
H-2820

H-2821

H-2802

H-2823

H-2822

Cube Mold, Diagonal Bronze Cube Mold, Expansive Grout, Bronze Cube Mold, Econ-o-Cube
ASTM C87, C91, C109, C141, C267, C307, C311, 2" cube mold for expansive grout with diagonal The Econ-O-Cube cube mold forms three 2"
C472, C617, C618, C1073; AASHTO T71, T106. arrangement, forged bronze. Reinforcing rib pre- test cubes in a diagonal arrangement. Mold and
Three-gang, cube mold with diagonal arrange- vents spreading. Detachable base plate and top detachable base are held together by self-align-
ment in forged bronze. Reinforcing rib prevents plate. Also available in 50mm. ing thumbscrews, which ensure an even, tight fit.
spreading and detachable baseplate. Available in Cube Mold, Expansive Grout, 2" H-2823 Molded to ASTM C109 dimensional tolerances. .
2" and 50mm. Cube Mold, Expansive Grout, 50mm H-2823M Cube Mold, Econ-o-Cube H-2821
Ship wt. 17.2lbs. (7.8kg) Ship wt. 4lbs. (2kg)
2" Cube Mold, Parallel H-2820
50mm Cube Mold, Parallel H-2820M Cube Mold, Expansive Grout, Stainless Steel Cover Plate for Cube Mold
Ship wt. 13.7lbs. (6.2kg) 2" cube mold for expansive grout with diagonal Cover plate for slowing the cooling rate as com-
Cube Mold, Diagonal Stainless Steel arrangement, forged stainless steel. Reinforcing pound is poured. Designed to be used with
ASTM C87, C91, C109, C141, C267, C307, C311, rib prevents spreading. Detachable base plate and H-2820 cube molds.
C472, C617, C618, C1073; AASHTO T71, T106. top plate. Cover Plate for Cube Mold H-2822
Three-gang, 2" cube mold with diagonal arrange- Cube Mold, Expansive Grout H-2802 Ship wt. 6.2lbs. (2.8kg)

ment in forged stainless steel. Reinforcing rib pre- Ship wt. 14lbs. (6.3kg)

vents spreading with detachable baseplate. Cube Mold, Parallel Stainless Steel
2" Cube Mold, Diagonal Stainless Steel H-2808 ASTM C87, C91, C109, C141, C267, C307, C311,
Ship wt. 12lbs. (5.4kg) C472, C617, C618, C1073; AASHTO T71, T106.
Three-gang, cube mold with parallel arrangement
in 316 stainless steel. Fitted with angles for attach-
ing to studs threaded into detachable baseplate.
Available in 2" and 50mm.
2" Cube Mold, Parallel H-2810
50mm Cube Mold, Parallel H-2810M
Ship wt. 14lbs. (6.3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 217
CEMENT Cube Testing

H-2809 H-3855

H-2805-R

H-2805-A
H-2860W
H-2800

H-2860

H-2804

H-2817
H-2816.8
H-2812

Cube Mold, Stamped Construction Rubbing Block 2" Cube Compression Pad, Red
2" cube mold with diagonal arrangement. Used Ground steel block 3" dia. x 1" (76 x 25mm) Compression pad, 80 durometer, used in compres-
with cement, gypsum, lime, mortars, etc. These for removing lose sand grains and encrusta- sion tests of 2" cubes. Used with H-2804 Retainer
molds do not meet ASTM or AASHTO specifica- tions from concrete specimen surfaces before Caps. Sold individually.
tions and must be individually measured. compressive testing. 2" Cube Compression Pads, Red H-2805-R
Ship wt. 0.25lbs. (0.11kg)
Cube Mold, Stamped Construction H-2809 Rubbing Block H-2812
Ship wt. 1.7lbs. (0.7kg) Ship wt. 0.2lbs. (0.09kg) 2" Cube Pad Retainer Caps
Briquette Mold Digital Caliper, 0-200mm Stainless steel retainer caps for use with 2" cube
ASTM C307 Provides accurate outside, inside, depth and step specimens. Use with 2" compression pads to elim-
Cast-bronze briquette mold for hydraulic cement measurements and features large, easy-to-read inate the need for capping compound. Sold in sets
mortar tensile strength tests. Bronze clamps with LCD digits, rolling thumb wheel; plus control but- of 2.
pins hold the two mold halves securely. Designed tons for zero, on/off and inch/mm functions. 2" Cube Pad Retainer Caps H-2804
Ship wt. 0.25lbs. (0.23kg)
to prevent spreading during molding. Digital Caliper, 0-200mm H-2816.8
Briquette Mold H-2800
Ship wt. 2.2lbs. (1kg) 2" Cube Compression Pads Set
Ship wt. 3.5lbs. (1.5kg) Dial Caliper, Stainless Steel 6" (150mm) Compression pads used with H-2804 Retainer
Easy-to-read black face dial caliper with combina- Caps. Sold in set, consisting of (2) H-2805-R and
Tamper, Wood
tion inch and metric scales features 0.001"/ 0.1mm (2) H-2805-A.
ASTM C87, C109, C157, C185, C596; AASHTO
T106, T137, T160 graduations, hardened and ground stainless steel 2" Cube Compression Pads Set H-2805
main beam with hardened, ground and lapped Ship wt. .5lbs. (.22kg)
Wood tamper is 6" (152mm) long with 0.5 x 1" (13
measuring faces.
x 25mm) cross section.
Dial Caliper, Stainless Steel 6" (150mm) H-2817M
Tamper, Wood H-2860W Ship wt. 1.5lbs. (0.68kg)
Ship wt. 0.3lbs. (0.14kg)
Dial Caliper, Stainless Steel 6"
Tamper, Rubber Compound
Similar to above, features a 6" measuring range
Rubber compound tamper is 6" (152mm) long with
with .001" graduations and .100" per revolution.
0.5 x 1" (13 x 25mm) cross section. Does not com-
ply with ASTM standards. Dial Caliper, Stainless Steel 6" (150mm) H-2817
Ship wt. 1.3lbs. (0.58kg)
Tamper, Rubber Compound H-2860
Ship wt. 0.3lbs. (0.14kg) Certified Calipers are also available, please enquire.

Tamping Stick 2" Cube Compression Pad, Amber

ASTM C185; AASHTO T137 Compression pad, 90 durometer, used in compres-
Maple wood with .625" (16mm) dia. and 6" sion tests of 2" cubes. Used with H-2804 Retainer
(152mm) length. Caps. Sold individually.
Tamping Stick H-3855 2" Cube Compression Pads, Amber H-2805-A
Ship wt. 0.1lbs. (0.04kg) Ship wt. .25lbs. (.11kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

218
Prism Molds CEMENT
H-3252 H-3251
H-3256

H-3
H-3253

H-3255

H-3255S
H-3270
H-3260
H-3254

H-2905.1

Prism Molds Gauge Studs

Description Ship wt. Model
ASTM C490 ASTM C151, C157, C227, C490; AASHTO M210,
Application: Autoclave expansion of Portland T107.
Designed to produce required 10" effective gauge
cement; length change of mortar and concrete;
length, prism test bars. Molds feature removable Gauge studs have stainless steel contact points
potential alkali reactivity of cement/aggregate
partitions, base and end plates. Effective gauge and are knurled and threaded for use with cement
combinations; linear change of magnesium and
length is measured from inside end of the studs. prism molds. Packaged 10 per bag.
oxychloride cements; volume change of cement
Molds produce cement prism specimens 11.25" Gauge Studs H-3260
paste
long. Including studs, outside to outside length of Ship wt. 0.15lbs. (0.06kg)
1" x 1" x 10" 7.3 lbs specimen is 11.625".
(25 x 25 x 254mm), H-3252 Tamping Rod
1-mold, cold-rolled steel (3.3kg) Prism Molds see chart ASTM C157, C192; AASHTO T60.
Ship wt. see chart
1" x 1" x 10" Round, straight steel .375" dia. x 12" (10 x 305mm).
9.6 lbs Restraining Cage, 2" x 2" x 10"
(25 x 25 x 254mm), H-3253 Both ends rounded to a hemispherical tip the same
2-mold, cold-rolled steel (4.3kg) ASTM C806
diameter as the rod.
1" x 1" x 5" For 2" x 2" x 10" (51 x 51 x 254mm) prism molds.
6 lbs Tamping Rod H-2905.1
(25 x 25 x 127mm), H-3255S Features 1/4-20 continuous threaded rod and
2-mold, stainless steel (2.72kg) Ship wt. 0.5lbs. (0.23kg)
acorn nuts.
Demold Device for Prism Molds
Retaining Cage, 2" x 2" x 10" H-3251RC
Description Ship wt. Model Handy device for removing prism samples from
Ship wt. 1.4lbs. (0.63kg)
molds.
Application: Volume change tests of mortars Restraining Cage, 3" x 3" x 10"
Demolding Device for Prism Molds H-3258DD
2" x 2" x 10" 20.6 lb ASTM C878 Ship wt. 4lbs. (1.8kg)
(51 x 51 x 254mm), H-3251 For 3" x 3" x 10" (51 x 51 x 254mm) prism molds.
2-mold, cold-rolled steel (9.3kg)
Features 1/4-20 continuous threaded rod and
1" x 1" x 5" 6 lb acorn nuts.
(25 x 25 x 127mm), H-3255
2-mold, cold-rolled steel (2.7kg) Restraining Cage, 3" x 3" x 10" H-3257
Ship wt. 2.8lbs. (1.27kg)
Application: Volume change of cement past;
length change of mortar and concrete H-3258DD
3" x 3" x 10"
(76 x 76 x 254mm), 24.8 lbs
H-3254
1-mold, cold-rolled steel (11kg)
H-3251RC
Application: Volume change tests H-3257
4" x 4" x 10" 35.5 lbs
(102 x 102 x 254mm), H-3256
1-mold, cold-rolled steel (16.1kg)

1.6 x 1.6 x 6.3"

(40 x 40 x 160mm) 14.3 lbs
H-3270
3-gang mold, cold- (6.4kg)
rolled steel

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 219
CEMENT Length Change Comparison

H-3250.8

H-3250 H-3250D

Length Comparator, Dial Indicator Length Comparator, Digital Indicator Comparator Replacement Components
ASTM C151, C157, C227, C311, C341, C342, ASTM C151, C157, C227, C311, C341, C342,
Description Model
C452, C490, C596; AASHTO M210, T107, T160. C452, C490, C596; AASHTO M210, T107, T160.
Invar reference bar
Length comparators measure length changes of Length comparators measure length changes of
for use with H-3250 and 10" H-3249A
hardened cement paste, mortar and concrete hardened cement paste, mortar and concrete
(254mm) specimens
prismatic specimens. Indicators are mounted on a prismatic specimens. Indicators are mounted on a
sturdy upright support attached to a solid triangu- sturdy upright support attached to a solid triangu- Invar reference bar
lar base. All units Include stationary and movable lar base. All units Include stationary and movable for use with H-3248 and H-3249A.16
anvils designed to fit H-3260 gauge studs, which anvils designed to fit H-3260 gauge studs, which 16" (406mm) specimens
are cast into test specimens and an invar reference are cast into test specimens and an invar refer- Dial indicator H-3250.3
bar. Comparators for 10" (254mm) or 16" (406mm) ence bar. Comparators for 10" (254mm) or 16"
Digital indicator, 120V 60Hz H-3250.3D
effective length samples with 3.625" (92mm) dia. (406mm) effective length samples with digital
dial gauge with a range of .400" and gradations of indicator with a range of .600" and resolution of Digital indicator, 220V 50/60Hz H-3250.3D.4F
.0001". The Dial is marked 0-10. Includes station- .0001". Measures inches and millimeters includes
ary and movable anvils designed to fit the H-3260 batteries and AC adapter. Unit can be zeroed Anvil with collar (one each) H-3250.4
gauge studs that are cast on test specimens and an at any point on the range and can be switched
Anvil only H-3250.4.4
invar reference bar. Unit accommodates test spec- from inches to mm by pressing a button. Includes
imens up to 4" x 4" (102 x 102mm) cross section. stationary and movable anvils designed to fit the Collar only H-3250.4.3
Length Comparator, 10" Effective Length H-3250 H-3260 gauge studs that are cast on test speci- Elevating screw, nut collar & H-3250.7
Length Comparator, 16" Effective Length H-3248 mens and an invar reference bar. Unit accommo- anvil assembly
Ship wt. 32.7lbs. (14.8kg) dates test specimens up to 4" x 4" (102 x 102mm)
Adapter for 5" specimens H-3250.8
cross section.
Length Comparator, 10" Effective Length Custom size Invar Reference Bars are available,
120V 60Hz H-3250D please enquire: 1.800.544.7220.
220V 50/60Hz H-3250D.4F
Length Comparator, 16" Effective Length
120V 60Hz H-3248D
220V 50/60Hz H-3248D.4F
Ship wt. 36.5lbs. (16.8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

220
Turbidimeter, Expansion
p CEMENT
H-3267

H-3241.1

H-3267.1

H-3241.2

H-3805

H-3265
H-3241
Wagner Turbidimeter Mortar Bar Container, 1.25" x 3.5" x 12" High-Pressure Autoclave
ASTM C115; AASHTO T98 ASTM C227, C1260 ASTM C141, C151; AASHTO T107
Determines fineness of Portland cement, using Stainless steel. Dimensions: 1.25" x 3.5" x 12" (32 Uses accelerated means of estimating delayed
photoelectric cell to measure light passing through x 89 x 305mm) ID Tight-fitting cover prevents mois- expansion of Portland cement caused by hydra-
suspended pulverized material. Microamp meter ture loss. Capacity not more than 315ml of water, tion of CaO and MgO. This is done by determining
measures current generated in the cell; indicated which completely immerses three specimens sup- the volume constancy of mortar prism samples.
reading is measure of turbidity of the suspen- ported above bottom of container. Test bars are exposed to high-pressure steam
sion. Includes photoelectric cell {and light source Mortar Bar Container H-3264 compartment, which accepts a sample holder for
in metal cabinet, timing burette and stand, wet Ship wt. 16lbs. (7.2kg) 8 prisms per ASTM, 1" x 1" x 11.25" (25 x 25 x
sieving assembly including gauge and spray noz- 285mm) and 6 prisms as per the DIN standard, 40 x
Mortar Bar Container, Round with Bar Holder
zle, microamp meter, 3 flasks, 4 test tubes, stir- 40 x 160mm. Unit has a capacity of 7.8 liters, a max
ASTM C227
ring apparatus and instruction book. Battery not pressure of 360 psi (25 bar) and a max temperature
included. Plastic container includes H-3267.1 Test bar holder of 482°F (250°C).
(cast bronze) that supports 8 bars vertically. Holder
Wagner Turbidimeter H-3805 Includes two gauges, one for temperature and
has feet that elevate it from the base of the con-
Wagner Turbidimeter, 230V 60Hz H-3805.2F one for pressure and a safety pop valve for safety.
tainer, which provides space for water and keeps
Wagner Turbidimeter, 230V 50Hz H-3805.5F Also includes security test certificate for pressure
test bars out of the water. Dimensions: 6" dia. x 17"
Ship wt. 65lbs. (29.4kg) chamber in accordance with EN pressure device
(152 x 432mm).
Mortar Bar Container, 9" x 11" x 15.5" directive.
Mortar Bar Container with Bar Holder H-3267
ASTM C227, C1260 The 120V 60Hz version of this autoclave comes
Ship wt. 6.1lbs. (2.7kg)
Stainless steel covered container for storing test with an auxillary voltage converter, which is
Test Bar Holder Only included. Overall dimensions: 20.5 dia" x 44" (550
specimens has tight-fitting cover that prevents
ASTM C227 dia x 1120)
moisture loss. Supports up to 36 mortar bars ver-
Test bar holder (cast bronze) for use with H-3267 High-Pressure Autoclave, 120V 60Hz H-3241
tically. Dimensions: 9" x 11" x 15.5" (229 x 279 x
mortar bar container. Holder has feet that elevate High-Pressure Autoclave, 220V 50Hz H-3241.5F
394mm).
it from the base of the container providing space Ship wt. 220lbs. (100kg)
Container, Mortar Bar-Rectangular H-3265
Ship wt. 16lbs. (7.2kg)
for water.
Prism Bar Frame
Test Bar Holder H-3267.1 ASTM C227
Ship wt. 4lbs. (1.8kg)
Prism bar frame for use with H-???? autoclave.
ASTM model holds 8 prisms 1" x 1" x 11.25" (25
x 25 x 285mm). DIN model holds 6 prisms 40 x 40
x 160mm.
Prism Bar Frame, ASTM H-3241.1
Prism Bar Frame, DIN H-3241.2
Ship wt. 4lbs. (1.8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 221
CEMENT Expansion

H-3242

H-3240.4
H-3243B
H-3240.3

H-3240.22 H-3245

H-3240.21M
H-3240.21N
H-3240
H-3243A

H-3244
Cement Autoclave Test Bar Holder, 5" Autoclave Replacement Parts
ASTM C151; AASHTO T107 ASTM C141, C151; AASHTO T107 Description Model
Uses accelerated means of estimating delayed Test bar holder for 5"-long (127mm) samples. Air vent valve H-3240.2
expansion of Portland cement caused by hydra- Test Bar Holder H-3243A Safety pop-off valve H-3240.3
tion of CaO and MgO. Test bars are exposed to Ship wt. 4lbs. (1.8kg)
controlled steam pressure and corresponding con- Pressure gauge H-3240.4
Rupture Disk
stant temperature. Unit produces 60-350 psi (0.4- Pressure-control switch H-3240.5
Rupture disks are used as safety devices in systems
2.4MPa) range of pressures and consists of steam
that involve pressure vessels, eliminating the need Set of cap screws, 16 per set H-3240.6
vessel, pressure regulator, pressure gauge (0-600
for a safety valve. The rupture disk is designed to
psi x 5 psi), air vent valve, power switches and Relay 60Hz H-3240.7
be the weakest part of a pressure system so if there
safety pop valve set at 350psi. Includes 20° 500°F Gaskets,100 per package H-3242
is a situation when excessive pressures occur, then
spirit thermometer, wrench and 5 gaskets. Addi- Lower heating unit for discon-
the rupture disk fractures or opens thus releasing
tional gaskets, heating units and safety pop valves H-3244
the built-up energy rendering the system safe. tinued models. 115V. 50/60Hz
are available as replacement parts. Chamber
Rupture disks are a simple, yet reliable method for Heating element; two-piece
dimensions: 6.125" ID x 16". Overall dimensions:
providing a safe system, which does not require wrap-around type for both top H-3245
17" x 48" x 28" (431 x 1219 x 711mm) 1700W max-
calibration. and bottom. 115V 50/60Hz
imum power demand. 220V version comes with
Rupture Disk, Monel H-3240.21M Thermometer, 20 to 580°F H-2600.2F
transformer.
Rupture Disk, Nickel H-3240.21N
Cement Autoclave, 120V 60Hz H-3240 Ship wt. 0.4lbs. (0.18kg) Thermometer, -5 to 300°C H-2610.2C
Cement Autoclave, 220V 50/60Hz H-3240.4F Rupture Disk Holder
Ship wt. 180lbs. (81.6kg)
Rupture disk holder, complete with piping to
Test Bar Holder, 10" attach to the H-3240 cement autoclave. Order rup-
ASTM C141, C151; AASHTO T107 ture disks separately.
Test bar holder for 10"-long (254mm) gauge bars; Rupture Disk Holder H-3240.22
8-bar capacity. Holds specimens vertically, above Ship wt. 2.9lbs. (1.3kg)

water level, so each test bar is exposed to steam.

Test Bar Holder H-3243B
Ship wt. 2.9lbs. (1.4kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

222
Marsh Funnel, Mud Balance CEMENT

H-4790
HC-2842 HC-2843

HC-2843A

H-2818

HC-2845 H-2818HD
H-4791

Mud Balance Marsh Funnel Viscometer Sand Content Test Set

ASTM D4380 ASTM D6910 ASTM D4380
The mud balance provides a simple, practical The marsh funnel viscometer is a rugged, easy The sand content kit is a simple, accurate and inex-
method for the accurate determination of fluid to operate instrument that is used for making pensive sieve analysis apparatus for determining
density. The item’s durable aluminum construction rapid, on the spot measurements of drilling mud the sand content of drilling muds. The sand con-
makes it ideal for field use. It's high-impact plastic viscosity. Marsh funnel readings are only general tent kit consists of a special 200-mesh sieve 2.5"
case protects the balance during transport while measurements, but the frequent reporting of the in diameter, fastened inside a collar upon which a
providing a secure base for the balance during use. marsh funnel viscosity will alert the mud engi- small funnel is fitted on either end. This is used with
Scale reads in pounds per gallon (6-24 lb/gal); spe- neer to sudden changes in the mud viscosity that a 10 ml glass measuring tube, graduated to read
cific gravity (0.72-2.88 gms/cm3); pounds per cubic could require corrective action. The marsh funnel from 0 to 20% the percentage sand by volume. The
foot (45-180 lb.cu ft), and pounds per square inch Viscosity is the ratio of the speed of the mud as it collar and funnel are made of polyethylene and the
per 1,000 feet of depth (310-1250 lb/sq in/100ft passes through the outlet tube (the shear rate) to screen is made of brass. A 500ml wash bottle and
of depth). The H-4790 mud balance meets all the the amount of force— the weight of the mud itself, carrying case are included.
requirements of the API standard procedures for which is causing the mud to flow (the shear stress). Sand Content Test Set HC-2845
testing water base drilling fluids, oil base drilling marsh funnel viscosity is reported as the number of Ship wt. 3lbs. (1.3kg)
fluids and oil well cements. seconds required for one quart of mud to flow out
Mat Depth Gauge, Fireproofing
Mud Balance H-4790 of a full marsh funnel.
Gauge for measuring the depth of fireproof-
Ship wt. 5lbs. (2.2kg) Marsh Funnel Viscometer HC-2842 ing. Plastic body with steel probe. Range: 0-6"
Ship wt. 3lbs. (1.3kg) (0-150mm).
Tru-Wate Density Balance
ASTM D4380 1 Liter Measuring Cup for Marsh Funnel Mat Depth Gauge, Fireproofing H-2818
The TRU-WATE Mud Balance is an instrument for 1 liter, plastic measuring cup used for collecting Ship wt. 0.3lbs. (0.13kg)

measuring the absolute density of a fluid sample. sample from marsh funnel. Mat Depth Gauge, Fireproofing
With the TRU-WATE Balance, the density of a fluid 1 Liter Measuring Cup HC-2843A Gauge for measuring the depth of fireproof-
sample, such as cement slurry, can be measured in Ship wt. 1lbs. (0.45kg) ing. Plastic body with steel probe. Range: 0-3"
a fixed volume sample under pressure. By pressur- 1 Liter Measuring Cup for Marsh Funnel (0-76mm).
izing the sample cup the entrained air or gas can 1 liter, plastic measuring cup used for collecting Mat Depth Gauge, Fireproofing H-2818HD
be decreased to a negligible volume, thus pro- sample from marsh funnel. Ship wt. 0.3lbs. (0.13kg)
viding a slurry density measurement more closely 1 Liter Measuring Cup HC-2843
in agreement with the true density which will be Ship wt. 1lbs. (0.45kg)
realized under down-hole conditions. This den-
sity balance is constructed of premium metals for
durability, accuracy and ease of use. A high impact
plastic case protects the balance during transport
and provides a secure base in its working position.
TRU-WATE Density Balance H-4791
Ship wt. 5lbs. (2.2kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

Bending Beam Test . . . . . . . . . . . 248-249
ASPHALT
Mixers. . . . . . . . . . . . . . . . 240-241
Bitumen Testing . . . . . . . . . . . . 253-257 Overlay Tester . . . . . . . . . . . . . . 252
Compactor, Steel Roller. . . . . . . . . . . .Ê247 Penetrometers . . . . . . . . . . . . . 262-263
Distillation . . . . . . . . . . . . . . 272-274 Rice Test . . . . . . . . . . . . . . . 237-239
Ductility . . . . . . . . . . . . . . . 258-261 Samplers . . . . . . . . . . . . . . . . .Ê270
Extraction . . . . . . . . . . . . . . 274-277 Semi-Circular Bending . . . . . . . . 232-233, 235
Flash Testers . . . . . . . . . . . . . 270-271 Softening Point. . . . . . . . . . . . . 268-269
Gyratory . . . . . . . . . . . . . . . 250-251 Universal Testers . . . . . . . . . . . . 242-243
Hamburg Wheel Tracker . . . . . . . . . . .Ê246 Universal Test Accessories . . . . . . . . . 244-245
Marshall, Accessories . . . . . . . . . . . .Ê235 Viscosity . . . . . . . . . . . . . . . 264-268
Marshall Compactors . . . . . . . . . . 226-230 Water Baths. . . . . . . . . . . . . . . .Ê236
Marshall, Load Frames . . . . . . . . . . 232-234
Marshall Molds. . . . . . . . . . . . . . .Ê231
226
Marshall ASPHALT

Heavy-Duty, Auto Marshall Compactor Machines can be ordered with either 4" or 6"
ASTM D6926, D5581, AASHTO T245, PTM705, R68 molds, but can easily be altered later to accommo-
Humboldt automatic, Marshall compaction date the other size by purchasing a hammer and
machines are designed to provide a stable and test molds of the desired size.
rigid mechanism for producing 4" or 6" diameter Each machine includes: the mechanical compactor,
asphalt pills used in Marshall tests. These Marshall ASTM-compliant pedestal, an automatic counter
compaction machines are available in two types and hammer assembly, (1) compaction mold, and
of configurations: one with a rotating mold with a (1) package of paper discs. rotating-mold config-
tapered-foot hammer assembly, and the other, a uration machines come with a tapered-foot ham-
stationary mold with a flat-foot hammer. Both mod- mer assembly and stationary-mold configuration
els feature a heavy-duty design, which stands up machines come with a flat-foot hammer assembly.
well to the constant jarring caused by the compac- Rotating Mold Configuration
tion process. 4" Dia. Specimens, 115V 60Hz H-1364R
These machines feature an automatic counter, 6" Dia. Specimens, 115V 60Hz H-1366R
which allows the operator to preset the number of 4" Dia. Specimens, 230V 60Hz H-1364R.2F
blows desired and, turns off the machine when a 6" Dia. Specimens, 230V 60Hz H-1366R.2F
4" Dia. Specimens, 230V 50Hz H-1364R.5F
cycle is completed. After the number of blows has
6" Dia. Specimens, 230V 50Hz H-1366R.5F
been set, the operator can start the machine with a
Ship wt. 330lbs. (149.6kg)
push button and keep track of the number of blows
on an LED readout. A cam-action lever operates Stationary Mold Configuration
4" Dia. Specimens, 115V 60Hz H-1364
the integral mold holder to facilitate insertion and
6" Dia. Specimens, 115V 60Hz H-1366
removal of the compaction mold.
4" Dia. Specimens, 230V 60Hz H-1364.2F
6" Dia. Specimens, 230V 60Hz H-1366.2F
4" Dia. Specimens, 230V 50Hz H-1364.5F
6" Dia. Specimens, 230V 50Hz H-1366.5F
Ship wt. 320lbs. (145.15kg)

H-1334BA
H-1334BA.4F

H-1360A H-1360B
H-1360BF H-1360M
H-1360AF
Ovens and hotplates can
be used to facilitate the
heating of molds and
hammers for better test-
ing control. See page
314-315 for ovens and
page 321 for hotplates.

H-1364R Replacement Parts for Heavy-Duty Automatic, Single Compactors

Item Part No.
4" Hammer with tapered foot (rotating mold) H-1360A
6" Hammer with tapered foot (rotating mold) H-1360B
4" Hammer with flat foot (stationary mold) H-1360AF
6" Hammer with flat foot (stationary mold) H-1360BF
Lift chain for H-1364, H-1366 series compactors H-1360.21
Replacement ASTM-compliant pedestal for compactors H-1360M
Replacement counter & proximity switch, 120V H-1334BA
Replacement counter & proximity switch, 230V H-1334BA.4F

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 227
ASPHALT Marshall

H-1360A.38

H-1360A.30

H-1360A.37 H-1360A.31

H-1360B.30
H-1360A.37L

H-1360A.37R

H-1360A.36

H-1360A.32

H-1360A.33.1

H-1360A.33

H-1338.34

H-1360A.32.1 H-1360A.32.2

H-1360A.35
or
H-1360AF.35 H-1360A.35.1

H-1360A.32.3
H-1360B.35
or
H-1360BF.35

Hammer Assemblies and Replacement Parts

Item Part No. Item Part No.
Sliding weight, 10 lb (for 4" mold) H-1360A.30 Anvil release arm weldment H-1360A.38
Sliding weight, 22.5 lb (for 6" mold) H-1360B.30 Hammer release arm H-1360A.38.1
Hammer slide shaft H-1360A.32 Anvil, top H-1360A.38.2
Spring retainer, anvil H-1360A.32.1 Spring (Foot) H-1338.34
Spring washer, anvil H-1360A.33 Spring (Release) H-1360A.31
Hammer foot, 4" tapered H-1360A.35 0.25" dia. x 1" large roll pin H-1360A.32.2
Hammer foot, 4" flat H-1360AF.35 0.1875" dia. x 1.5" roll pin H-1360A.32.3
Hammer foot, 6" tapered H-1360B.35 Internal retaining ring H-1360A.33.1
Hammer foot, 6" flat H-1360BF.35 0.3125" dia x 0.5" large dowel pin H-1360A.35.1
Hammer release pin, left hand H-1360A.37L 1/4-20 x 1/2" large truss head screw H-1360A.36
Hammer release pin, right hand H-1360A.37R 0.25" dia. x 1.375" Large dowel pin H-1360A.37

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

228
Marshall ASPHALT

H-1336D H-1346D H-1356D

4" Automatic, Single Compactor 4" Automatic, Double Compactor 4" Automatic, Triple Compactor
with Stationary Base with Rotating Base with Rotating Base
ASTM D6926, AASHTO T245, PTM705, R68 ASTM D6926, AASHTO T245, PTM705 ASTM D6926, AASHTO T245, PTM705
This compactor automatically compacts samples at This compactor automatically compacts two sam- This compactor automatically compacts three sam-
a preset number of hammer blows and shuts off ples simultaneously at a preset number of hammer ples simultaneously at a preset number of hammer
at completion. The compactor features a stationary blows and shuts off at completion. The compactor blows and shuts off at completion. The compactor
base with flat-foot hammer. Unit includes mechan- features rotating bases with tapered-foot ham- features rotating bases with tapered-foot ham-
ical compactor, automatic counter, ASTM-com- mers. Unit includes mechanical compactor, auto- mers. Unit includes mechanical compactor, auto-
pliant oak compaction pedestal, (1) hammer and matic counter, ASTM-compliant oak compaction matic counter, ASTM-compliant oak compaction
(1) H-1341A mold assembly. Additional mold and pedestal, (2) hammers and (2) H-1337 mold assem- pedestal, (3) hammers and (3) H-1337 mold assem-
hammer assemblies are recommended for efficient blies. Additional mold and hammer assemblies blies. Additional mold and hammer assemblies
testing operations, allowing you to preheat multi- are recommended for efficient testing operations, are recommended for efficient testing operations,
ple molds and hammers to speed testing. allowing you to preheat multiple molds and ham- allowing you to heat multiple molds and hammers
4" Single Compactor, 115V 60Hz H-1336D mers to speed testing. to speed testing.
4" Single Compactor, 230V 60Hz H-1336D.2F 4" Double Compactor, 115V 60Hz H-1346D 4" Triple Compactor, 115V 60Hz H-1356D
4" Single Compactor, 230V 50Hz H-1336D.5F 4" Double Compactor, 230V 60Hz H-1346D.2F 4" Triple Compactor, 230V 60Hz H-1356D.2F
Ship wt. 226lbs. (102.5kg) 4" Double Compactor, 230V 50Hz H-1346D.5F 4" Triple Compactor, 230V 50Hz H-1356D.5F
Ship wt. 265lbs. (120.2kg) Ship wt. 351lbs. (181.4kg)

Replacement Parts for Standard-Duty, Automatic Compactors

Item Model #
4" hammer with flat foot (stationary base) for H-1336D H-1338A
4" hammer with tapered foot (rotating base) for H-1346D, H-1356D H-1338B
4" hammer with “Canadian” tapered foot (rotating base)
H-1338C
for H-1346D, H-1356D H-1341A
Marshall Compaction Mold 4" for Stationary Base Compactors H-1341A
H-1347.3M
Marshall Compaction Mold 4" for Rotating Base Compactors H-1337
Lift Chain for H-1336D, H-1346D and H-1356D H-1336.21
Replacement Counter and proximity switch for Compactors, 115V H-1334B H-1347.2M
Replacement Counter and proximity switch for Compactors, 230V H-1334B.4F H-1337
Replacement Pedestal for H-1336D Marshall Compactor H-1347M
H-1338A
Replacement Pedestal for H-1346D Marshall Compactor H-1347.2M H-1338B H-1347M
Replacement Pedestal for H-1356D Marshall Compactor H-1347.3M H-1338C

To facilitate the heating of molds and hammers, H-1334B

See page 314-315 for Ovens and page 321 for Hotplates. H-1334B.4F

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 229
ASPHALT Marshall
H-1338.29
H-1338.40

Lift Catch Assembly and Replacement Parts

Item Model #
Complete lift catch assembly H-1338.40A
Release block H-1338.28 H-1338.40.1 H-1338.40A
Complete
Pin H-1338.28.1 Lift catch
assembly
Clevis pin H-1338.29
H-1338.28 H-1338.30
Lift catch H-1338.30
H-1338.28.1
Spring H-1338.31
Screw H-1338.36
Washer H-1338.37
H-1338.31
Release housing H-1338.40
Screw for release housing H-1338.40.1

H-1338.37

H-1338.36

H-1338.25

H-1338.25.2 H-1338.25.1
Hammer Assemblies and Replacement Parts
Item Model #
H-1338.25.3
Clevis pin with screw H-1338.29
H-1338.25.4
Locator guide H-1338.25
Hex head bolt H-1338.25.1
Washer H-1338.25.2
Nut H-1338.25.3 H-1338.26.1
Spacer H-1338.25.4 H-1338.32

Hammer handle H-1338.26

H-1338.26
Spring pin H-1338.26.1
Hammer rod H-1338.27
Key H-1338.27.1
Hammer weight (complete) H-1338.32 H-1338.33
H-1338.27
Plug H-1338.33
Spring H-1338.34
H-1338.34
Hammer foot, flat H-1338.35
Hammer foot, tapered H-1338.38
H-1338.27.1 H-1338.27
Hammer foot, Canadian spec H-1338.39
Screw for foot (2 required) H-1338.35.1
Socket Head Screw, 5/16 x 18 x 1.25" H-1338.36
Washer H-1338.37 H-1338.35.1

H-1338.35 or
H-1338.38 or
H-1338.39

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

230
Marshall ASPHALT

H-1343
H-1345 H-1345.5

H-1345.6

H-1328A

H-1347
H-1340 H-1340G

Hand Compactor Set for 4" Molds 4" Hand Compaction Hammer w/ Finger Guard Hammer Guide, Adjustable
ASTM D6926 ASTM D6926 Hammer guide for hand compactor testing.
Compactor set that facilitates hand compaction of Compacts asphalt mixture in the compaction Hammer Guide, Adjustable H-1345.5
Ship wt. 2.6lbs. (1.1kg)
4" Marshall specimens. Set features ASTM-compli- mold. Hammer has finger guard at base of sliding
ant oak pedestal with hammer support rod, which weight. Flat circular face is 3.95" (100.3mm) dia.; Hammer Support Rod
holds hammer in perpendicular alignment to base hammer is 10 lb. (4.54kg.) sliding weight and has Hammer support rod for hand compactor testing.
during compaction. Also features a mold holder, a free fall of 18" (457mm). Additional mold and Mounts to pedestal.
which keeps the mold securely positioned during hammer assemblies are recommended for efficient Hammer Support Rod H-1345.6
Ship wt. 9.3lbs. (4.2kg)
compaction. Set includes: H-1340G compaction testing operations, allowing you to heat multiple
hammer; H-1347 pedestal with ASTM-compliant molds and hammers to speed testing. Marshall Mix Design and Testing Booklet
steel plate; H-1341A compaction mold; H-1343 4" Hammer w/Finger Guard H-1340G This booklet covers the Marshall mix design cri-
compaction mold holder; H-1345.6 hammer sup- Ship wt. 20lbs. (9.0kg) teria; equipment necessary to perform the tests;
port rod, and H-1345.5 adjustable guide. Addi- Mold Holder for Hand Compaction sample preparation and testing procedures; data
tional mold and hammer assemblies are recom- ASTM D6926 analysis, as well as moisture susceptibility testing
mended for efficient testing operations, allowing methods.
Holder mounts on compaction pedestal and cen-
you to preheat multiple molds and hammers to ters the compaction mold under the hammer for Marshall Mix Design Booklet H-1328A
Ship wt. 9lbs. (4.1kg)
speed testing. fast, repeatable operation. Mold holder keeps
4" Hand Compactor Set H-1345 mold, collar and base plate securely positioned
Ship wt. 165lbs. (74.8kg)
during compaction.
4" Hand Compaction Hammer Mold Holder for Hand Compaction H-1343
AASHTO T245, R68 Ship wt. 4.8lbs. (2.1kg)

Hammer used to compact asphalt mixture in the Pedestal for 4" Hand Compactor
compaction mold. Flat circular face is 3.875" ASTM D6926
(98mm) dia.; hammer is 10 lb. (4.54kg.), sliding This oak pedestal is necessary for stabilizing molds
weight and has a free fall of 18" (457mm). Additional during compaction. The ASTM-compliant oak
mold and hammer assemblies are recommended compaction pedestal is 8" x 8" x 18" (203 x 203 x
for efficient testing operations, allowing you to 457mm), capped with 12" x 12" x 1" (305 x 305 x
preheat multiple molds and hammers to speed 25mm) steel plate. The pedestal mounts to a con-
testing. crete slab with four angle brackets located at the
Ovens and hotplates can be used to facil-
4" Hand Compaction Hammer H-1340 bottom of pedestal.
Ship wt. 18.5lbs. (8.3kg) itate the heating of molds and hammers
Pedestal for 4" Hand Compactor H-1347 for better testing control. See page 251
Ship wt. 82lbs. (37.1kg)
for ovens and page 256 for hotplates.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 231
ASPHALT Marshall Molds

H-1353A

H-1367, H-1367MM H-1361 H-1341A H-1337, H-1337MM

H-1341P H-1348
H-1361P H-1363 H-1331 H-1355

Marshall Compaction Mold, 6" or 150mm Marshall Compaction Mold, 4" or 100mm Storage Can for Marshall Samples
ASTM D5581 (Rotating Base) 4" dia. x 5.5" tall metal can with lid for storing Mar-
6"or 150mm compaction mold assembly for 4" or 100mm compaction mold assembly for shall mix samples.
preparing test specimens with the H-1366 and preparing test specimens with the H-1346D and Storage Can, 4" H-1331
H-1366R compactors. Can be used with rotating H-1356D rotating-base compactors. The mold is Ship wt. 2.8lb. (1.27kg)

or stationary base models. Mold is machined from machined from seamless tubing and plated. Mold Sample Ejector, Hand-Operated
seamless tubing and plated. Mold is comprised of is comprised of a base plate, mold cylinder and ASTM D5581, D6926, AASHTO T245, R68
a base plate, mold cylinder and extension collar. extension collar. Base plate of mold is designed Designed for lab and field use to extract asphalt
to link with rotating base feature of compactors samples from either 4" or 6" compaction molds.
Compaction Mold, 6" H-1367
Compaction Mold, 150mm H-1367MM causing the mold to rotate during compaction. The ejection force is generated by means of a
Ship wt. 15lbs. (6.8kg) Forming mold is 4" (102mm) ID by 3" (76mm) high 3-ton (27.7kN) capacity hand-operated hydraulic
Marshall Compaction Mold, 4" (Rotating Base) and interchangeable with either end of the form- jack. The cast-aluminum ejector head assembly
ASTM D6926 ing mold. Forming mold is 4" (102mm) ID by 3" can be positioned at different heights through the
(76mm) high. use of quick release pins. This enables the opera-
4" compaction mold assembly for preparing test
specimens with the H-1364R rotating base com- Compaction Mold, 4" (Rotating Base) H-1337 tor to easily match the ejection travel to the height
Compaction Mold, 100mm (Rotating Base) H-1337MM of the mold being used. Maximum stroke distance
pactors. Mold is machined from seamless tubing Ship wt. 8lbs. (4kg)
and plated. Mold is comprised of a base plate, for this ejector is 7.5". Overall dimensions: 13"W x
Paper Disks 6"D x 27"H (330 x 152 x 686mm).
mold cylinder and extension collar.
ASTM D5581, D6926
Compaction Mold, 4" H-1361 Sample Ejector, Hand-Operated H-1353A
Ship wt. 9lbs. (4kg) Circular, smooth-edged 4" or 6" diameter disks, Ship wt. 46.2bs. (20.9kg)

Marshall Compaction Mold, 4" (Stationary Base) which can be placed in the bottom of compaction Sample Ejector, Motorized
ASTM D6926 molds prior to filling with asphalt mixture to facili- ASTM D5581, D6926, AASHTO T245, R68
tate removal of the sample from the mold. Use with Similar in design and construction to the H-1353A
4" compaction mold assembly for preparing test
all molds. series sample ejector, this model features the use
specimens with H-1336D mechanical compactor
Paper Disks, 4" package of 1000 H-1341P of a 5-ton capacity motorized hydraulic pump and
and H-1340 and H-1345 hand compactors. Mold is
Paper Disks, 6" package of 500 H-1361P
machined from seamless tubing and plated. Mold ram assembly. The unit incorporates extended
Ship wt. 0.8lbs. (0.3kg)
is comprised of a base plate, mold cylinder and upright rods in order to accommodate both stan-
Mold Extractors
extension collar. Base plate and collar are inter- dard 4" or 6" asphalt compaction molds, as well
ASTM D5581, D6926, AASHTO T245, R68
changeable with either end of the forming mold. as the taller gyratory compaction molds. Maximum
Forming mold is 4" (102mm) ID by 3" (76mm) high. Used with compression tester for removing 4" or stroke distance for this ejector is 9.25". Overall
6" specimens from compaction molds. dimensions excluding pump: 13"W x 6"D x 29"H
Compaction Mold, 4" (Stationary Base) H-1341A
Ship wt. 8lbs. (3.6kg) Mold Extractor, 4" H-1348 (330 x 152 x 737mm).
Mold Extractor, 6" H-1363 Sample Ejector, 120V 60Hz H-1355
Ship wt. 3.6lbs. (1.6kg)
Sample Ejector, 220V 50/60Hz H-1355.4F
Ship wt. 81lbs. (36.7kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

232
Marshall and SCB
SC Load Frames ASPHALT
road construction to high-volume commercial and
educational laboratories.
While the HM-5030 has been specifically designed
for soil testing labs conducting multiple testing
operations including: UU, CU and CD triaxial, UC,
CBR and LBR, it is also perfect for running Mar-
shall, Hveem, TSR and SCB asphalt tests as well. Its
heavy-duty design and precise stepper-motor con-
trol provide a stable platform for years of reliable
service allowing the HM-5030 to perform any tests
required up to its load capacity of 11000 lbf (50kN).
Like all Elite Series load frames, the HM-5030 is
built around Humboldt's integral, 4-channel data
logger with touch-screen control, which allows
the load frame to be used as a standalone device
capable of full test control and data logging. It can
also be controlled by a networked computer at any
location with access to the network.

Specifications
Load capacity 11000 lbf (50kN) HM-5120.3F
0 - 3.0000 in/min. (sold as a load frame only, shown
Speed range with typical Marshall setup)
0 - 75.0000 mm/min.
all the data in several formats at the machine while
Data channels 4
the test is running. Data can then be transfered to
Platen Size / Travel 10" (254mm) / 4" (100mm)
a computer for use with Humboldt's Next Software
1000 tests and up to for report generation.
Data storage
3000 readings per test
This machine can also be controlled from a com-
HM-5030.3F Clearance, vertical 40" (1000mm) puter using Humboldt's NEXT software. This
(sold as a load frame only, shown
Clearance, horiz. 15" (380mm) software provides robust machine control, data
with typical Marshall setup)
Voltage 110/220V 50/60Hz. 5.0 amps acquisition and report generation. Because the
Humboldt MasterLoader Marshall Solution HM-5120 is connected to your network, your com-
ASTM D5581, D6926, D6931; AASHTO T245, HM-5030.3F sold as a load frame only
puter can be placed in the your lab, in the next
T283; BS 598; EN12697-34 room or at a different location. Adding the Mar-
Master Loader, 110/220V 50/60 Hz HM-5030.3F
The HM-5030 Master Loader provides the ultimate Shipping wt. 300 lb (136kg) shall-specific Software Module allows you to better
solution for a lab looking to perform Marshall, control your Marshall test by guiding you through
Hveem and SCB testing, but would also like to be Marshall, TSR, SCB Load Frame the specific process.
able to use the load frame for all their other testing ASTM D5581, D6926, D6931; AASHTO T245, The HM-5120 is sold as a Load Frame ONLY, refer
needs as well. The digital MasterLoader provides T283; BS 598; EN12697-34 to the recommended accessories chart for items
that ability by easily handling asphalt compression needed to perform Marshall and TSR and SCB
HM-5120 Loader has been specifically designed
testing, as well as soil tests such as CBR and triaxial testing.
to handle Marshall, TSR and SCB applications. Its
tests including UU, CU, CD and UC.
heavy-duty design and precise stepper-motor con-
The digital MasterLoader has the ability to work Specifications
trol provide a stable platform for years of reliable
as a stand-alone unit, which can perform Marshall service. From educational institutions and consult- Load capacity 11000 lbf (50kN)
tests at the push of a button; or with the aid of ing firms to high-volume commercial labs and con- 2 in/min.
Humboldt's NEXT software, the Marshall software Speed range
struction projects, the HM-5120 Loader can handle 50.8mm/min.
module and a computer, it can be automated these applications with ease. Data channels 2
to run tests and gather data in real-time data
The HM-5120 is built around Humboldt's integral, Platen Size / Travel 10" (254mm) / 4" (100mm)
acquisition in the form of charts and graphs. The
data logger with touch-screen control, which allows
HM-5030 is ideal for road construction projects 1000 tests and up to
the load frame to be used as a standalone device Data storage
in either mobile or fixed labs, educational institu- 3000 readings per test
capable of full test control and data logging. It can
tions and consulting firms. Clearance, vertical 40" (1000mm)
also be controlled by a networked computer at any
Designed for applications requiring multi-purpose Clearance, horiz. 15" (380mm)
location with access to the network. Adding the
loading systems, such as road construction projects
Marshal-specific Software Module allows you to Voltage 110/220V 50/60Hz. 5.0 amps
in either mobile or fixed labs, educational institu-
better control your Marshall test procedure.
tions and consulting firms, the HM-5030 Master
These new waterproof, touch screens provide col- HM-5120.3F sold as a load frame only
Loader is ideal for just about any application from
orful, at-a-glance monitoring of testing functions
Marshall Load Frame, 110/220V 50/60 Hz HM-5120.3F
without the use of a computer. Operators can see
Shipping wt. 300 lb (136kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 233
ASPHALT Marshall and SCB Load Frames
HM-5005SW
Marshall Software
Module

See page 100-101

for more informa-
tion on Humboldt's
NEXT Software.

HM-5170

Humboldt's HM-5030, HM-5120and HM-5170 • Up to 255 individual tests can be run

load frames are part of our Elite Series of load simultaneously from a single PC
frames, which provide both stand-alone and com- • Provides advanced graphing capabilities
puter control options. In stand-alone mode, these • Provides full-unit customization
load frames provide a 7" (178mm) touch-screen • Reports can also be exported to Excel or
controller. These new waterproof, touch screens a CSV file, if desired, and, we can provide
provide colorful, at-a-glance monitoring of testing custom integration/export solutions for LIMS,
functions without the use of a computer. Opera- EQuIS, gINT, etc.

Marshall and CBR/LBR Automatic Load Frame tors can see all the data in several formats at the
machine while the test is running. Data can then NEXT Marshall Software Module
ASTM D1883; AASHTO T193; BS 1377 Part 4
be viewed simultaneously or downloaded later ASTM D5581, D6926, D6931; AASHTO T245,
Load frame for those who do Marshall asphalt test- T283; BS 598; EN12697-34
to a computer in the lab, in the next room or at a
ing and CBR soil testing in their lab. The HM-5170
different location, while also providing report gen- Humboldt's NEXT software is used to control the
does both operations and has the same speci-
eration capabilities from within Humboldt's NEXT operation of Humboldt's testing machines, as well
fications as the HM-5120 on page 234, except
software or our enhanced test-specific modules. as provide data acquisition and reporting of test
that it does CBR as well. The HM-5170 is built
Stand-Alone Control data. The software provides a computer-based
around Humboldt's integral, data logger with platform with the ability to configure testing
touch-screen control, which allows the load frame Touch-Screen Controller provides:
machines and the testing process; calibrate trans-
to be used as a standalone device capable of full • multi-channel data acquisition
ducers, load cells and digital indicators; specify
test control and data logging. It can also be con- • Hi-res, 7", waterproof, touch-screen provides total
testing parameters and limits, operate the machine
trolled by a networked computer at any location control and real-time graphical display of tests
during the testing and provide detailed reports of
with access to the network. Its heavy-duty design • Machine/Test control and data acquisition
the data collected in tabular or graphical formats.
and precise stepper-motor control provide a stable via touch-screen
• Calibration of channels to load cell and transducer Humboldt's NEXT data acquisition software, in
platform for years of reliable service.
• Real-time graphical chart and numerical display of conjunction with compatible Humboldt testing
The HM-5170 is sold as a load frame only.
tests via touch-screen display equipment, provides a complete solution for the
MarshallCBR/LBR Frame, 110/220V 50/60 Hz HM-5170.3F acquisition, recording and presentation of test
• Effective sampling rate of 50 readings per second
Shipping wt. 258 lbs (117kg) data.
• Stores up to 1000 tests with 3000 points per test
Recommended Marshall, TSR and SCB Accessories • 2 USB ports. One in front for data transfer and the The Marshall-specific Module provides these
for use with HM-5030, HM-5120 and HM-5170 rear port is for powering a wireless access point. added features to the NEXT software.
Load Frames Computer Control • Marshall-specific setup, which guides you
Humboldt's Next software is included with through the process and includes selecting data
Part # Description
all Elite Series Load Frames. This software provides collection parameters that best fit the Marshall test
HM-2300.100 S-type load cell, 11,000lbf (50kN) robust machine control, calibration, data acquisi- • input specific project information for each test,
HM-2310.10 Strain Transducer, 1" (25mm) tion and report generation for those using a com- such as project name, client information, etc
puter to control computer to control consolidation
Strain Transducer, 1" (25mm) • all Marshall-specific initial, intermediate, and
HM-2305.10 testing operations.
Required for HM-5120 ONLY. final parameters required by ASTM and BS stan-
In addition, operators have the ability to view and dards are dynamically calculated for you, based
HM-4178BRT Displacement transducer bracket
control testing operations from a PC in the lab, in on your input of specimen information, such as
Displacement transducer bracket the next room or at a different location, while also
HM-2505BRSQ size, weight, etc
Required for HM-5120-5170 ONLY. providing report generating capabilities using the
• tabulated test data, graphs and all Marshall-spe-
HM-5005SW Marshall software module consolidation test-specific software module.
cific calculations are provided in real time, allow-
H-1342 Marshall breaking head, 4" • Machine control, and data acquisition via net- ing you to monitor tests in process
worked computer
H-1362 Marshall breaking head, 6" • generate Marshall-specific reports that include
• Provides the ability to use Next Software's, ad- all graphs and data presented in a project
H-1349 Lottman breaking head, 4"
vanced test-specific modules NEXT Marshall Software Module HM-5005SW
H-1369 Lottman breaking head, 6" • Real-time graphical chart and numerical display of Download from Humboldt website
H-1351 Semi-circular Bend Test Breaking Head tests via computer display
• Effective sampling rate of 50 readings per second
• Unlimited tests and up to 3000 points per test.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

234
Marshall Load Frames ASPHALT
H-1335
Marshall Test Set

H-1339B

HM-2850.3F

Multi-Speed Load Frame Marshall Compression Machine Metric version includes: (1) H-1339B, 220V Mar-
ASTM D5581, D6926, D6931, AASHTO T245, ASTM D5581, D6926, D6931, AASHTO T245, shall compression machine; (1) H-1340– 4" hand
T283, BS 598, EN12697-34 T283, BS 598, EN12697-34 compaction hammer; (2) H-1341A– 4" Marshall
The HM-2850 Multi-speed Load Frame is Compression machine designed specifically for compaction molds; (1) H-1342M–100mm Marshall
designed for those who want a high-quality, but testing the resistance to plastic flow of bituminous breaking head; (1) H-1343– mold holder for hand
simple, multi-purpose load frame without built-in paving mixtures— the Marshall test. Machine has compactor; (1) H-1344.2M– dial flowmeter with
data acquisition capabilities. The HM-2850 is ideal a one-speed motor with reversing switch that pro- H-1390, 230V water bath.
for applications where the operator is either not duces a uniform vertical movement of 2" (51mm) Marshall Test Set, 120V 60Hz H-1335
concerned with data acquisition; or, already has per minute. Unit includes a H-4454.100 calibrated Marshall Test Set, 220V 60Hz H-1335.2F
or is planning to construct their own data acqui- load ring and dial indicator for determining test Marshall Test Set, 220V 50Hz H-1335.5F
sition system. With its large 7" color, touchscreen, load. Load capacity is 11,000 lbf. (50kN). Maximum Marshall Test Set-Metric, 230V 60Hz H-1335M.2F
Marshall Test Set-Metric, 230V 50Hz H-1335M.5F
the HM-2850 provides the operator with the abil- piston travel is 3.5" (88mm). Overall dimensions Ship wt. 325lbs. (147.4kg)
ity to precisely select any speed with four-decimal are: 18" x 18" x 38.5"H (457 x 457 x 978mm).
accuracy within the machine’s speed range. Compression Machine, 120V 60Hz H-1339B Typical Setup for Marshall Testing
The HM-2850 features a quiet, direct drive step- Compression Machine, 220V 60Hz H-1339B.2F with HM-2850 or H-1339B Load Frames
per motor that provides a range of loading speeds Compression Machine, 220V 50Hz H-1339B.5F Description Qty Part #
Ship wt. 250lbs. (113.3kg)
from .00001 to 2.00000 in/min. This speed range Marshall load frame H-1339B
is more than adequate for the majority of standard Basic Marshall Test Set 1
ASTM D5581, D6926, D6931, AASHTO T245, (choose one) HM-2850
soil tests. The HM-2850 also incorporates a sepa-
T283, BS 598, EN12697-34 Load Ring, 11,000 lbf (50kN) 1 H-4454.100
rate, dedicated control to accommodate 2.00 in/
min. for use in Marshall and TSR Testing, as well as Basic test set for evaluating stability and plastic Dial flow meter kit w/
1 H-1344
a rapid travel speed of 2.25 in/min for moving the flow (Marshall tests) of bituminous paving mix- Dial gauge 1.00" x 0.01"
platen into position quickly. Speeds are controlled tures. Includes all the basic testing equipment for Marshall breaking head, 4" 1 H-1342
through the use of edit keys and the digital display. performing these tests. Ideal setup for field lab
applications, as well as dedicated Marshall test
Specifications labs. Included in the set are: (1) H-1339B–Marshall
Load capacity 11000 lbf (50kN) compression machine; (1) H-1340– 4" hand com-
.00001 - 2.00000 in/min. paction hammer; (2) H-1341A– 4" Marshall com-
Speed range paction molds; (1) H-1342–4" Marshall breaking
.00001 - 50.80000 mm/min.
head; (1) H-1343– mold holder for hand compac-
Platen Size / Travel 8" (203mm) / 3" (76mm)
tor; (1) H-1344– dial flowmeter with guide sleeve;
Clearance, vertical 40" (812mm) (1) H-1347– pedestal for 4" hand compactor; (1)
Clearance, horiz. 11" (279mm) H-1348– 4" mold extractor, and (1) H-1390– water
Dimensions 17 x 22 x 51 inch bath. 230V models include a H-1390.4F water
(l x w x h). (432 x 559 x 1295mm) bath.
Voltage 110/220V 50/60Hz. 5.0 amps

Multi-Speed Load Frame, 110/220V 50/60 Hz HM-2850.3F

Shipping wt. 300 lb (136kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 235
ASPHALT Marshall Accessories

H-1344.2
H-1342, H-1362
H-1349, H-1369 H-1344
H-1342M H-4454.100D
H-1349M, H-1369M H-1351
H-4454.100

Marshall Breaking Head, Semi-Circular Bending (SCB) Head Dial Flowmeter Kit
ASTM D6927 ASTM D8044; AASHTO TP124 ASTM D6927
Marshall breaking heads consist of an upper and The H-1351 Semicircular Bend fixture has been Used to measure flow during Marshall testing.
lower cylindrical segment having 3" inside radius designed for use with the test methods above. Consists of a special dial indicator with a maximum
of curvature for 6" samples and 2" for a 4" sam- The H-1351 SCB head can be configured in two position brake assembly and a guide sleeve, which
ple. The lower segment is mounted on a base with ways. The first utilizes the upper and lower seg- fits over either guide rod of a H-1342 or H-1362
two perpendicular guide rods extending vertically ments of the breaking head. The lower segment is Marshall breaking head. H-1344 has a range of
from the base. One guide rod is larger than the comprised of a base with two perpendicular guide 1.00" with 0.01" divisions and the H-1344M has a
other, with a correspondingly larger guide sleeve rods extending vertically and an upper segment range of 25mm with 0.25mm divisions
in the upper segment to ensure correct assembly. mounted to the lower segment by sliding on the Dial Flowmeter Kit H-1344
Guide sleeves in the upper segment bring the two vertical guide rods. The holes in the upper seg- Dial Flowmeter Kit, Metric H-1344M
sections together without appreciable binding or ment are lined with brass to reduce binding as it Ship wt. 2lbs. (.9kg)

loose motion on the guide rods. moves up and down the guide rods. In this config- Dial Gauge For Flowmeter
Marshall Breaking Head, 4" H-1342 uration the upper swivel contact bar is mounted to ASTM D6927
Marshall Breaking Head, 6" H-1362 the upper breaking head segment. Consists of a special dial indicator with a maximum
Ship wt. 25lbs. (11.3kg)
In the second configuration, the upper swivel con- position brake assembly. The H-1344 has a range
Marshall Breaking Head, Metric tact bar is separated from the upper breaking head of 1.00" with 0.01" divisions and the H-1344M has
Marshall breaking heads consist of an upper and bar and is mounted directly to the load cell. If using a range of 25mm with 0.25mm divisions
lower cylindrical segment. The lower segment is this method, precise alignment can be achieved by Dial Gauge For Flowmeter H-1344.2
mounted on a base with two perpendicular guide using the alignment guide, which is included. Dial Gauge For Flowmeter, Metric H-1344.2M
rods extending vertically from the base. One guide Ship wt. 1lbs. (.45kg)
The H-1351 Semi-circular Bending Head can be
rod is larger than the other, with a correspondingly Guide Sleeve For Flowmeter Kit
used in conjunction with one of Humboldt’s load
larger guide sleeve in the upper segment to ensure ASTM D6927
frames, such as the HM-5030 Master Loader or
correct assembly. Guide sleeves in the upper Guide sleeve for use with dial gauge to measure
HM-5120 Marshall frames. It may also be used with
segment bring the two sections together without flow during Marshall testing. Device fits over either
your present load frame, if the frame meets the
appreciable binding or loose motion on the guide guide rod of a H-1342 or H-1362 Marshall breaking
test’s speed requirements. Humboldt offers addi-
rods. head and provides mounting of dial gauge.
tional Data Loggers with instrumentation for data
Marshall Breaking Head, 100mm H-1342M acquisition of the SCB test results using the SCB Guide Sleeve For Flowmeter Kit H-1344.1
Ship wt. 25lbs. (11.3kg)
Ship wt. 0.6lbs. (.27kg)
breaking head when used with your present load
Lottman Breaking Head Digital Accessory Kit
frame.
ASTM D6931, AASHTO T283 Four-channel digital display for use with the
Semi-Circular Bending (SCB) Head H-1351
Breaking heads for testing tensile strength. H-1349 Ship wt. 25lbs. (11.3kg) H-1339. Includes: s-type 11,000 lbf (50kN) load
has 0.5" wide upper and lower segments for use cell; 0.4" (10mm) linear strain transducer; trans-
Marshall Test Load Rings
on 4" samples. H-1369 has 0.75" wide upper and ducer bracket, and 4-channel data Logger.
ASTM E74
lower segments for use on 6" samples. Digital Accessory Kit H-1324A.3F
These calibrated load rings are available with
Lottman Breaking Head, 4" H-1349 Ship wt. 10lbs. (4.5kg)
dial gauges or digital indicators and come with a
Lottman Breaking Head, 6" H-1369
Lottman Breaking Head, 100mm H-1349M unique serial number for positive identification.
Lottman Breaking Head, 150mm H-1369M Units are calibrated in lbs. force every 20 lbs. from
Ship wt. 10.2lbs. (4.6kg) 0 to 1,000 lbs. and every 50 lbs. from 1,000 to
11,000 lbs. with adequate deflection to interpolate
to 10 lbs., in kg force and kN. Comes with 3/4"-16
female, threaded mount.
11,000 lbf (4,550kgf, 50kN) w/Dial Gauge H-4454.100
5,500 lbf (2,500kgf, 25kN) w/Dial Gauge H-4454.050
11,000 lbf (4,550kgf, 50kN) w/Digital H-4454.100D
5,500 lbf (2,500kgf, 25kN)w/Digital H-4454.050D
Ship wt. 11lbs. (4.9kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

236
Water Baths ASPHALT

H-1394

H-1380
H-1392, H-1390

• Auto-tuning is fast & effortless • Percent power limit protects components from
• Rapid cycling provides fast system response stress
• Dual, digital display simultaneously shows • Operator lockout guards against unwanted changes
set point and process temperature • All exposed parts are stainless steel. Front
• Ramp-to-set point handles critical panel is water and corrosion resistant.
temperature processes smoothly
• Set point range limiting protects process
and equipment

Humboldt water baths feature a microproces- Deluxe Water Bath Large Deluxe Water Bath
sor-based digital controller for precise tempera- ASTM D6927, D5581 and D4867 ASTM D6927, D5581 and D4867
ture control throughout their temperature range of Microprocessor-based control for precise tempera- Microprocessor-based control for precise tempera-
ambient to 180°F (82°C) at an accuracy of +/-0.1% tures throughout the range. Includes magnetic tures throughout the range. Includes magnetic
of input span. The dual digital display simultane- circulator, ensuring constant water temperature, circulator, ensuring constant water temperature,
ously shows the set point and the process tem- and, a stainless steel shelf, which stands 2" (51mm) and, a stainless steel shelf, which stands 2" (51mm)
perature at a glance. above the bottom of the unit for free circulation of above the bottom of the unit for free circulation of
Humboldt water baths are fully insulated to help water above and below test samples. Volume is water above and below test samples. Volume is: 17
maintain constant temperatures easily. Models 7.76 gallons (29.40L) and dimensions are: ID: 19.5" gallons (63.4L) and dimensions are 20" x 20" x 10"
H-1390 and H-1392 can accommodate (12) 4" W x 11.5" D x 8" H (495.3 x 292.1 x 203.2mm). deep (508 x 508 x 254mm).
diameter or (3) 6" diameter Marshall specimens at Water Bath, Deluxe 120V 60Hz H-1390 Water Bath, Large 120V 60Hz H-1394
a time. And the model H-1394 can accommodate Water Bath, Deluxe 220V 50/60Hz H-1390.4F Water Bath, Large 220V 50/60Hz H-1394.4F
(16) 4" and (9) 6" diameter Marshall specimens at Ship wt. 44lbs. (19.9kg) Ship wt. 75lbs. (34kg)
a time. All models include a stainless steel shelf, Water Bath Economy Water Bath
which supports specimens while allowing 2" of ASTM D6927, D5581 and D4867 Low-cost alternative water bath for heating spec-
free circulating water above and below specimens. Microprocessor-based control for precise tempera- imens holds eight standard 4" stability molds.
Models H-1390 and H-1394 also utilize a magnetic tures throughout the range. Includes a stainless Supporting shelf above the bottom allows water
stirring bar to induce water flow within the bath steel shelf, which stands 2" (51mm) above the bot- circulation around specimens. Automatic thermo-
and ensure a uniform temperature is maintained. tom of the unit for free circulation of water above static control with a range of 150° to 500°F (65° to
Model H-1392 does not have a magnetic stirring and below test samples. Volume is 7.76 gallons 160°C). ID 11.5 x 19.5 x 5.5" (293 x 497 x 140mm)
bar. All exposed areas are stainless steel and the (29.40L) and dimensions are: ID: 19.5" W x 11.5" D deep. H-1380.4F uses a step-down transformer,
front control panel is both water and corrosion x 8" H (495.3 x 292.1 x 203.2mm). which is included, for electric conversion.
resistant. Water Bath, Economy 120V 60Hz H-1380
Water Bath, 120V 60Hz H-1392
Water Bath, 220V 50/60Hz H-1392.4F Water Bath, Economy 220V 50/60Hz H-1380.4F
Ship wt. 43lbs. (19.5kg) Ship wt. 18lbs. (8.16kg

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 237
ASPHALT Rice Test

Typical Rice Test Setup

H-1750

H-1755A

H-1750

H-1751

Pycnometer
Size Comparison.

H-1749 H-12090 H-1754D

H-1820
Vacuum Pycnometer Set (4.34L) for Rice Test Pycnometer Replacement Lid Manometer, Digital
ASTM D2041; AASHTO T209, T283 Replacement lid for models H-1750, H-1751 and A precise measurement device designed to
Used in rice testing to determine the maximum H-1755A. replace mercury-filled manometers used in Rice
specific gravity of bituminous paving mixtures with Pycnometer Replacement Lid H-1750.2 test applications. This portable, hand-held device
maximum aggregate size up to 19.1mm (.75"). The Ship wt. 4lbs. (1.8kg) can be easily moved around the laboratory. Holes
H-1750 provides a 4.34L volume with a 2.9L max. are provided for bench or wall mounting and a
Pycnometer Lid, O-Ring
sample volume and typically a 2500g required .375" barb fitting is used for quick connections.
Replacement o-ring for models H-1750, H-1751
sample size and a 7.5" ID x 6" depth. Set includes The instrument features a digital display range of 0
and H-1755A.
aluminum volumetric canister; volumetric lid; flat, to 1000mm Hg (absolute) at a resolution of 0.1mm
Pycnometer Lid, O-Ring H-1750.3
vinyl vacuum lid with O-ring and a metal water Hg. The device has a rated accuracy of +/-0.5%
Ship wt. 0.05lbs. (0.02kg)
vacuum aspirator with 3/8" IPT and 6' hose with full scale and is powered by one 9V battery or AC
Vacuum Pycnometer Set, Large-Capacity adapter, both are included.
release valve and fittings. Unit achieves vacuum
AASHTO T209, T283
using an aspirator or optional vacuum pump. Manometer, Digital, 120V 60Hz H-1754D
Large-capacity unit, 10L (2.64 gal.), 6000g (13.2 Manometer, Digital, Certified H-1754D-CA
This set is also available in stainless steel, order
lbs.) sample weight, with maximum aggregate size Manometer, Digital, 220V 50/60Hz H-1754D.4F
H-1750SS. For those who want to use smaller test
of 50mm (2"). The set features a domed, transpar- Manometer, Digital, Certified H-1754D.4F-CA
samples, the H-1751 is available. The H-1751 pro-
ent cover for easy observation of sample testing, Ship wt. 2lbs. (.9kg)
vides a 2.9L volume with a 1.9L maximum sample
perforated plastic shelf, which some States require; Slow-Release Valve for Vacuum Pycnometers
volume for a typical sample size of 1500g. It mea-
water inlet valve and .25" ID hose, quick-discon- ASTM D2041; AASHTO T283
sures 7.5" ID x 4" depth, but the H-1751 does not
nect, vacuum gauge, vacuum hose and aspira-
comply with ASTM specs. For use with H-1750, H-1755SS, H-1751, H-1755A
tor with 3/8" NPT fitting. Flange OD is 10.75"
A larger volume model pycnometer is also avail- and H-1820 for greater accuracy and shorter dry
(273mm); maximum clearance above plate is 7.75"
able. It provides a 5.8L volume with a 3.9L maxi- back time. Brass valve maintains 30mm vacuum
(197mm). Use with H-1826A.3F vibrating table,
mum sample volume and a 4000g typical sample pressure on sample.
and H-1754D manometer, sold separately. See
size. It measures 7.5" ID x 8" depth. Valve, Slow-Release H-1749
page 165 for vacuum pumps. Replacement parts
Ship wt. 0.6lbs. (.2kg)
All models can be used with H-1756A vibrat- are available, please inquire. Dimensions: 9.5" ID x
ing apparatus or H-1782 de-airing device, and 12.125" (240 ID x 311mm) Aspirator Filter Pump
H-1754D manometer, sold separately. See page Provides excellent performance for providing a
Vacuum Pycnometer Set, Large H-1820
241 for vacuum pumps. Replacement parts are vacuum for pycnometer applications. Water inlet is
Ship wt. 10lbs. (4.5kg)
available, please inquire. .375" and length is 5.375" (137mm).Nickel-plated
with serrated tail and side arm.
Vacuum Pycnometer Set, 6" (4.34L) H-1750
Vacuum Pycnometer Set, SS, 6" (4.34L) H-1750SS Aspirator Filter Pump H-12090
Vacuum Pycnometer Set, 4" (2.9L) H-1751 Ship wt. 0.25lbs. (.11kg)
Vacuum Pycnometer Set, 8" (5.8L) H-1755A
Ship wt. 13lbs. (5.8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

238
Rice Test ASPHALT

H-1782

H-1753 shown in
use with H-1782

H-1826.3F

H-1756.3F

HA-1665
HA-1666
H-4296A
De-airing Agitator results. The front panel incorporates a variable time and monitor the shaker frequency. Currently,
ASTM D2041; AASHTO T209, T283 speed controller with a range of 10 to 250 rpm the AutoRice acceleration monitor and shaker
Heavy-duty, vibrating, de-airing agitator for use and an LED programmable timer with an accuracy frequency is a parameter that is not monitored
with H-1750, H-1750SS, H-1751 and H-1755A pyc- of better than ±0.1%. The orbital diameter of the during the test. Data from the Rice test can be
nometers keeps sample material loose for more 11" x 12" (279 x 305mm) platform is set at 1.5" downloaded via the USB port, where results can be
reliable test results. Strong, rugged-duty vibra- (38.1mm). Taking up little counter space, the base reviewed to assure accuracy and adherence to test
tors and sturdy bases having integral, heavy-duty is 10" x 10" (154 x 154mm) and has an overall specifications. The unique, compact design allows
on/off switches. Exclusive quick-release cam/lock height of 16" (406mm). Quick release clamps are AutoRice to fit on a benchtop or mount to a wall
fasteners allow quick placement and removal of used to permit quick mounting and removal of the and works with glass flasks and metal container
canister. pycnometer. The optional H-1753 flask attachment setups.
De-airing Agitator, 120/220V 50/60Hz H-1756.3F allows the user to conduct tests using a laboratory AutoRice Controller HA-1665
Shipping wt. 16 lbs (7.2kg)
flask. Ship wt. 25lbs. (11.4kg)

De-airing Agitator, Large Orbital De-Airing Device, 120V 60Hz H-1782 PumpSaver
AASHTO T209, T283 Orbital De-Airing Device, 220V 50/60Hz H-1782.4F The PumpSaver is used to improve the accuracy,
Shipping wt. 38 lbs (17kg) efficiency, reliability and repeatability of your tests
For use with the H-1820 large pycnometer. Heavy-
Digital Timer, Humboldt requiring a vacuum pump, such as the Rice test,
duty vibrating Apparatus keeps sample mate-
Humboldt's portable digital timers automatically ASTM D2041 and AASHTO T209. PumpSaver con-
rial loose for more reliable test results. Strong,
shut off electrical equipment at a set time. Two nects to your vacuum pump and acts as a moisture
rugged-duty vibrators and sturdy bases having
models are available, one for up to 60 minutes, trap eliminating the need for desiccants or in-line
integral, heavy-duty on/off switches. Exclusive
the other up to 99 seconds. Feature easy-to-use moisture filters to protect the pump from moisture
quick-release cam/lock fasteners allow quick place-
digital interface and two-plug, AC receptacle. The damage.
ment and removal of canister.
accuracy for both versions is 0.5%. • Reduces the number of oil changes per year
De-airing Agitator, 120/220V 50/60Hz H-1826.3F Digital Timer, Minute, 120V 50/60Hz H-4296A
Shipping wt. 18 lbs (8.16kg) • Improves efficiencies
Digital Timer, Minute, 220V 50/60Hz H-4296A .4F
De-Airing Flask Attachment Digital Timer, Second, 120V 50/60Hz H-4299 • Eliminates flow restricting desiccant cartridges
For use with H-1756A and H-1782, flask not Digital Timer, Second, 220V 50/60Hz H-4299.4F • Increases pump life and efficiencies
included. Ship wt. 3lbs. (1.3kg)
PumpSaver HA-1666
De-Airing Flask Attachment H-1753 AutoRice Controller Ship wt. 25lbs. (11.4kg)

Shipping wt. 1.3 lbs (.58kg) ASTM D2041; AASHTO T209, T283 AutoRice USB Shaker Sensor
Orbital De-Airing Device The AutoRice is an automatic control unit allow- AutoRice USB Shaker Sensor HA-1667
ing laboratory technicians to conduct maximum Ship wt. 2lbs. (0.9kg)
The Humboldt orbital de-airing device is designed
for use in maximum specific gravity and density specific gravity tests with the press of a button.
determinations of bituminous paving mixtures. Designed to accurately control and monitor the
Through the use of an orbital shaking action, mate- vacuum pressure, vacuum time and shaker vibra-
rial densification that entraps air is virtually elimi- tion frequency, AutoRice ensures more consistent
nated, resulting in more accurate and uniform test inter-laboratory repeatability and accuracy. The
AutoRice will start the vacuum pump, regulate the
vacuum pressure, precisely control the vacuum

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 239
ASPHALT Rice Test

H-4296 H-1762

H-1764
H-1770
H 1770

H-1763A
H-1758

H-1757 H-1766.2
H-1759 H-1768.3
768 3 H-1766.3

Universal Analog Timer Vacuum Pump Drierite Desiccant, 8 mesh

Portable timer automatically shuts off electrical High-vacuum, small capacity, general-purpose ASTM D2041
apparatus at set time up to 60 minutes. Features vacuum pump with belt guard has two-stage con- Replacement desiccant for air drying unit. Protects
two-plug AC receptacle. struction for efficiency with low maintenance. Fea- vacuum pump by removing final traces of moisture.
Universal Analog Timer, 120V 60Hz H-4296 tures metal vanes and vented exhaust for introduc- Drierite Desiccant, 1 lb H-1757
Universal Analog Timer, 220V 50/60Hz H-4296.4F tion of air to remove condensible vapors. Pump is Shipping wt. 2.5 lbs (1.1kg)
Shipping wt. 2.6 lbs (1.1kg) filled with oil; an extra quart is included. Exhaust
Drierite Desiccant, 5 lb H-1767
High Vacuum Pump filter is available separately. Guaranteed ultimate
Shipping wt. 9 lbs (4kg)
Direct-drive two-stage rotary sliding vane high vac- vacuum is 25-29" (635-736mm) mercury, and free-
air displacement is 25L/min. (0.9cfm). Vacuum Pump Oil
uum pump features gas ballast and trap to reduce
High purity oil with low vapor pressure that does
risk of oil being sucked into the system. Produces Vacuum Pump, 120V 60Hz H-1770
not materially increase at temperatures up to 50°C
free air displacement 85L per minute (3 cu. ft. per Shipping wt. 80 lbs (36kg)
(122°F) and viscosity sufficiently low for use at
minute) and maximum vacuum 29-30". Operating Indicating Drierite Air Drying Unit 125°C (59°F). Oil remains fairly constant up to 50°C
temperature is 30 to 170°F (-1.11 to 76.6°C). Has
Easily installs in-line between vacuum pump and rice (122°F).
0.25" OD intake ports for 0.25" ID tubing. Dimen-
test equipment. This refillable unit measures 2.625" Vacuum Pump Oil, 1 Quart H-1766.2
sions: 11.25" x 15.5" x 6.5" (28.6 x 39.4 x 16.5cm).
by 11.375" (667 x 289mm) with hose barbs at both Shipping wt. 3 lbs (1.3kg)
High Vacuum Pump 120V 60Hz H-1763A ends, which can accept 0.25" to 0.375" flexible Vacuum Pump Oil, 1 Gallon H-1766.3
High Vacuum Pump 220V 50/60Hz H-1763A.4F tubing. Supplied complete with 650g of 8 mesh, Shipping wt. 9 lbs (4kg)
Shipping wt. 31 lbs (14kg)
indicating desiccant. Vacuum Pump Oil, 5 Gallon H-1766.4
Two-Stage Oil-less Vacuum Pump, Shipping wt. 41.2 lbs (18.6kg)
Indicating Drierite Air Drying Unit H-1759
Split-capacitor four-pole, two-stage oil-less dia- Shipping wt. 3.1 lbs (1.4kg) Vacuum Pump Oil, 1-Qt. (Case of 12) H-1766.5
phragm vacuum pump pulls 29" Hg maximum-ob- Shipping wt. 25 lbs (11.3kg)
Indicating Drierite Desiccant
tainable vacuum.
ASTM D2041 Vacuum Pump Oil,1 Gallon (Case of 6) H-1766.6
Two-Stage Pump, 120V 60Hz H-1762 Shipping wt. 54.6 lbs (24.7kg)
Two-Stage Pump, 230 50/60Hz H-1762.4F Indicating drierite is impregnated with cobalt chlo-
Flushing Oil for Vacuum Pumps, 1 gallon
Shipping wt. 25.7 lbs (11.6kg) ride. This desiccant is blue when dru and changes
Purges contaminants and condensables, such
to pink upon absorption of moisture. The color
Two-Stage Vacuum Pump as water and solvents from all mechanical vac-
change is pronounced and clearly visible. This
Designed for continuous use, this two-stage, belt- uum pumps. Use between oil changes minimizes
makes indicating drierite valuable when it is nec-
driven pump operates on the oil-sealed rotary contamination of new oil by residue from old oil;
essary to know with certainty that dryness is being
vane principle and is ideal for distillation, filtration, extends pump life.
maintained and to signal when the drying agent
degassing and as a roughing pump for high-vac- Flushing Oil for Vacuum Pumps, 1 gal. H-1768.3
should be replaced. It has the same efficiency as
uum systems. Pumps are mounted on rectangular Shipping wt. 8.3 lbs (3.7kg)
regular drierite and can be regenerarted for reuse.
steel base plate and include V-belt and belt guard
that totally encloses belt and pulleys. Pump pulls Indicating Drierite Desiccant, 1lb/8 mesh H-1758
29-30" maximum vacuum. Includes initial supply of Shipping wt. 2 lbs (.9kg)

oil plus an extra quart of HyVac® oil. Indicating Drierite Desiccant, 5lb/8 mesh H-1761
Two-Stage Pump, 120V 60Hz H-1764 Shipping wt. 10 lbs (4.5kg)
Two-Stage Pump, 230 60Hz H-1764.2F
Two-Stage Pump, 230 50Hz H-1764.5F
Shipping wt. 55 lbs (24.9kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

240
Mixers ASPHALT

H-3841.1

H-3839 H-3843A H-3842A

H-3841.2
Mixer, 5-Qt. Laboratory Bench Mixer, 12-Qt. (11.35L)
This mixer can be used for mixing asphalt mixes The Hobart model HL-120 bowl has a 12-qt.
in the lab. The H-3839 operates on the princi- (11.35L) mixing capacity and a 15-minute motor-
ple of planetary action where the beater reaches driven timer. Planetary action of the beater assures
every part of a batch, rotating on its axis in oppo- thorough blending and mixing. Selective agitator
site directions as it moves around the bowl. This transmission has 3 speed settings: 106, 196 and
mixer thoroughly blends, mixes and aerates all 358 RPM. Includes stainless-steel bowl, flat-type
ingredients for a consistent, predictable finished aluminum grid beater and aluminum dough hook.
batch. Selective agitator transmission has 3 speed Base dimension: 14.75" x 20" x 29.5265" (375 x
settings: 139, 285 and 591 RPM. Direct gear drive 508 x 750cm).
and a heavy-duty motor ensure constant mixing Laboratory Bench Mixer, 12-Qt. (4.73L)
speeds under load. A locking hand-lever provides 120V 60Hz H-3842A
precise raising and lowering of the mixing bowl. 230V 50/60Hz H-3842A.4F H-3842HW
H-3843AHW
Shipping wt. 185 lbs (83.9kg)
Base dimensions: 10.375 x 15" (264 x 381mm).
Height: 17" (432mm). The mixer includes a stain- H-3842A Accessories and Replacement Parts Humboldt Extreme-Duty Whisks
less steel bowl, wire whip, dough hook and an alu- Description Model Custom, hand-made extreme duty whisks are
minum flat beater. It is suggested that a stainless formed from 0.25" dia. stainless steel rod.
Aluminum beater H-3842A.1
steel beater or a Humboldt extreme-duty whisk be Designed to stand up to the abuse of mixing heavy
purchased for asphalt mixing applications as the 12-qt. stainless steel bowl H-3842A.2 aggregate asphalt mixes in the mixers listed above.
standard mixer parts do not wear well in asphalt Aluminum dough hook H-3842ADH
applications. Description Model
Stainless steel wire loop whip H-3842AWW
Mixer, 5-Qt. (4.73L), 120V 60Hz H-3839 For H-3843A (Hobart HL-200
H-3843AHW
Mixer, 5-Qt. (4.73L), 230V 60Hz H-3839.2F Laboratory Bench Mixer 20-Qt. (18.92L) 1/2HP) current
Mixer, 5-Qt. (4.73L), 230V 50Hz H-3839.5F The Hobart HL-200 mixer has a positive gear For H-3842A (Hobart HL-120
Shipping wt. 55 lbs (25kg) drive and planetary mixing action to deliver pos- H-3842AHW
1/2HP) current
itive results. Selective agitator transmission has 3
speed settings: 107, 198 and 361 RPM. Exclusive For H-3839 (Hobart
H-3841HW
stirring switch provides low (53RPM) speed to facil- N-50A-10) current
itate adding liquids to semi-solids. Includes stain- Hobart 20-quart mixer old
H-3843HW
less-steel bowl and flat-type aluminum grid beater. model (prior to 2007)
H-3839 Accessories and Replacement Parts Base dimension: 21" x 2 1.5" x 41.25" (533 x 546
Hobart 12-quart mixer old
Description Model x 1048cm). H-3842HW
modelAccessories
H-3841 (prior to 2007)
and Replacement Parts
Laboratory Bench Mixer, 20-Qt. (18.92L)
Bowl lid, acrylic H-3846L
120V 60Hz H-3843A Extreme-duty whisks for previous models, H-3842
Beater—stainless steel, flat-type H-3841.1 230V 50/60Hz H-3843A.4F (Hobart A-120) and H-3843 (Hobart A-200) are
Shipping wt. 230 lbs (104.3kg)
Bowl—stainless steel, 5 qt. (4.73L) H-3841.2 available, please call.
Wire loop whip—stainless steel H-3841WW H-3843A Accessories and Replacement Parts
Dough hook, aluminum H-3841DH Description Model
Aluminum beater H-3843A.1
20-qt. stainless steel bowl H-3843A.2 Replacement parts for previous models, H-3842
(Hobart A-120) and H-3843 (Hobart A-200) are
Aluminum dough hook H-3843ADH
available, please call.
Stainless steel wire loop whip H-3843A.WW

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 241
ASPHALT Mixers

H-1690.2

H-1690

H-1690.3
H-1692 H-4122
H-4122QF

H-1692.9

H-4121

H-1691.8A
H-1690.1
H-1691 H-1692.5

Asphalt/Concrete Mixer, 5 gal., Stationary Asphalt/Concrete Mixer, 10 gal., Mobile, four sample buckets. Dimensions are 14"W x 17"D
Chain-driven mixer, ideal for sample batch mixing 10 gallon, portable mixer with 8" semi-pneumat- x 48"H (356 x 432 x 1219mm). To assist operation,
in either laboratory or field. Separate utility bucket ic wheels for mobility. Mix bucket speed is 60 order a H-1702 materials handling scoop.
cradles securely inside enameled-steel mixer rpm with 0.5 HP motor. Includes mix bucket only. QuarterMaster™ Sample Splitter H-4122
frame. Maximum capacity 70 lbs (50lb recom- Order desired paddles separately, see below. Shipping wt. 100 lbs (45.3kg)

mended). Built for continuous duty performance. QuarterMaster™ Quick Funnel Insert
Asphalt/Concrete Mixer, 10 gal., Mobile
Choice of 4 Mixing angles. Mix bucket speed is 120V 60Hz H-1692 Use Funnel to significantly reduce the hopper size
60 rpm with 0.5 HP motor. Configuration includes 220V 50/60Hz H-1692.4F when reduction of smaller samples is desired.
bucket, H-1690.2 paddle and accessory chain Shipping wt. 97 lbs (44kg) QuarterMaster™ Quick Funnel Insert H-4122QF
guard. Shipping wt. 11.2 lbs (5.08kg)

Asphalt/Concrete Mixer, 5 gal., Stationary H-1691, H-1692 Mixer Accessories QuarterMaster™ Replacement Bucket
120V 60Hz H-1690 Description Model Replacement galvanized metal bucket for use with
220V 50Hz H-1690.5F Asphalt paddle for 5 gal. QuarterMaster™.
Shipping wt. 55.4 lbs (25.1kg) H-1691.6A
portable mixer QuarterMaster™ Replacement Bucket H-3372
H-1690 Mixer Accessories Shipping wt. 4lbs (1.8kg)
Description Model Concrete paddle for 5 gal. Sample Buckets (25pk)
H-1691.8A
portable mixer Disposable sample buckets for asphalt and other
Mixing paddle for 5 gal.
H-1690.2
H-1690 mixer Concrete paddle for 10 gal. materials. 170oz. capacity.
H-1692.9
portable mixer Sample Buckets (25pk) H-4121
Deluxe mixing paddle for 5 gal.
H-1690.3 Shipping wt. 3lbs (1.4kg)
H-1690 mixer Mix bucket for 5 gal. mixer H-1691.4
Bucket & cover for 5 gal. Mix bucket for 10 gal. mixer H-1692.5
H-1690.1
H-1690 Mixer
QuarterMaster™ Asphalt Mix Sample Splitter
Asphalt/Concrete Mixer, 5 gal., Mobile,
The QuarterMaster™ is ideal for dividing the larger
Direct-drive, 5 gallon, portable mixer with 8"
asphalt mix samples required in Superpave spec-
semi-pneumatic wheels for mobility. Mix bucket
ifications. The hopper accepts samples up to 120
speed is 60 rpm with 0.5 HP motor. Includes mix
lb (54kg) of any mix with aggregate between 9.5
bucket only. Order desired paddles separately.
to 37.5mm and quarters it into four equal parts.
Asphalt/Concrete Mixer, 5 gal., Mobile In operation, a simple throw of a lever divides the
120V 60Hz H-1691 sample. Using the device ensures greater control,
220V 50Hz H-1691.5F consistency and uniformity in the preparation of
Shipping wt. 84 lbs (38.1kg)
test samples. The unit is supplied complete with

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

242
Universal Testing ASPHALT

Specifications
Electronically limited to
Maximum Load
3500lbf (15.5kN)
Normally 87psi (600 kPa)
Load Transducer
Maximum 145psi (1000 kPa)
Actuator Stroke 1.2" (30mm)
Frequency 0 to 30 Hz
Electrical Supply 110/260V 50/60 Hz, 1 Ph
100-145psi (7-10 bar)
Compressed Air
@ 600 L/min (21cfm)
31" x 40" x 76"
Dimensions
(780 x 1000 x 1920mm)
Working Space 32.5" x 65" x 83"
Required (WxDxH) (825 x 1650 x 2100mm)
Desktop PC Included

HA-5100.3F

Servo-Pneumatic Universal Testing Machine (15.5kN) • Utilizes high performance ceramic spool • will accept any voltage transducer in any channel
ASTM D7369, D4123, D3497, D7313; AASHTO servo-valve using TEDS thermocouples
TP31, TP62, TP79, T307; EN 12697 Annex A, B, C, • High quality stainless steel frame • 1024 data points per cycle
D and E, EN 12697-44 SCB; NCHRP 1-28A,19, 9-29
• Accessories available to perform a range of stan- • up to 16 digital input and output channels
This machine is a development of the NAT which dard and non standard test methods • Ethernet, USB,RS232 to PC communication
was developed by Keith Cooper and Professor
Software: Software:
Steven Brown at the University of Nottingham.
• User friendly, intuitive and reliable Windows® • User friendly, intuitive and reliable Windows®
The use of a high precision servo-pneumatic valve
software developed using LabVIEW™ software developed using LabVIEW™
in conjunction with a low-friction actuator and
sophisticated data acquisition and control, results • Standard test software available to meet specific • Standard test software available to meet specific
in a performance that is equal to many servo- EN, ASTM and AASHTO test methods EN, ASTM and AASHTO test methods
hydraulic systems. • Universal test software for the development of • Universal test software for the development of
Accurate, digitally generated waveforms are test methods using static, sinusoidal, haversine, test methods using static, sinusoidal, haversine,
applied by the actuator producing repeatable square, triangular with user selected frequencies square, triangular with user selected frequencies
stress variations in test specimens that are simula- and data collection rates and data collection rates
tive of those in a road pavement due to moving • Stored test data can be imported into a spread- • Stored test data can be imported into a spread-
traffic. The actuator is double-acting allowing both sheet package to be analyzed by the user sheet package to be analyzed by the user
compressive and tensile forces to be applied. A tri- • Utilities are included for transducer check, diag- • Utilities are included for transducer check, diag-
axial cell system is available for the measurement nostic routines and calibration nostic routines and calibration
of the resilient modulus of unbound materials. cDAC Advanced Data Acquisition System 15.5kN Univ. Testing Machine 115-260V 50/60Hz HA-5100.3F
Features: A configurable design to meet your needs with up Ship wt. 79 lbs. (36kg)
• Low cost dynamic loading universal test system to 7 modules (max. 4 of each type) from the fol-
ideally suited to testing asphalt and unbound lowing per cDac unit: Interface, Acquisition, Digi-
Installation Verification and on site Training are
granular materials tal , Servo. Integral SIL-4 safety relay to ensure the
available for the Universal Testing Machines, please
• Double acting low friction actuator with integral highest level of user safety. Universal input 110 to
enquire.
stroke transducer 264V 50/60Hz. 250W power supply.
• 20-bit resolution, 5kHz per channel

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 243
ASPHALT Universal Testing
g

Specifications
Electronically limited to
Maximum Load
5620lbf (25kN)
Variable dependant on
Load Transducer
capacity
Actuator Stroke 2" (50mm)
Frequency 0 to 70 Hz
230V 60 Hz, 3 Ph
Electrical Supply
400V 50Hz, 3-Ph
100-145psi (7-10 bar)
Compressed Air
@ 100 L/min (21cfm)
Cabinet 40" x 52" x 95"
Dimensions (825 x 1300 x 2400mm)
Power Pack 25" x 23" x 35"
Dimensions (630 x 580 x 890mm)
Working Space 40" x 52" x 95"
Required (WxDxH) (825 x 1300 x 2400mm)
Desktop PC Included

HA-5200.7F

Servo-Hydraulic Universal Testing Machine (25kN) • Utilizes Star servo valve with “Sapphire Software:
ASTM D7369, D4123, D3497, D7313; AASHTO Technology” • User friendly, intuitive and reliable Windows®
TP31, TP62, TP79, T307; EN 12697 Annex A, B, • Motorized adjustable lower crosshead with auto- software developed using LabVIEW™
C, D and E, EN 12697-44 SCB; NCHRP 1-28A,19, matic hydraulic frame clamping • Standard test software available to meet specific
9-29; INVE 749, 754
• Integral programmable temperature controlled EN, ASTM and AASHTO test methods
The Servo-Hydraulic Universal Testing Machine cabinet • Universal test software for the development of
(CS-UTM-HYD) is a well-designed, inexpensive test methods using static, sinusoidal, haversine,
• Accessories available to perform a range of stan-
machine specifically developed for the testing of square, triangular with user selected frequencies
dard and non-standard test methods
materials used in pavement construction. and data collection rates
cDAC Advanced Data Acquisition System
A motorized, adjustable crosshead reduces the A configurable design to meet your needs with up • Stored test data can be imported into a spread-
time between test setups. The programmable to 7 modules (max. 4 of each type) from the fol- sheet package to be analyzed by the user
temperature cabinet provides the possibility to lowing per cDac unit: Interface, Acquisition, Digi- • Utilities are included for transducer check, diag-
perform frequency/temperature sweeps. Accurate tal , Servo. Integral SIL-4 safety relay to ensure the nostic routines and calibration
waveforms are digitally generated and applied by highs level of user safety. Universal input 110 to
the actuator producing repeatable conditions that 25kN Univ. Testing Machine, 400V 50Hz HA-5200.7F
264V 50/60Hz. 250W power supply. Ship wt. 79 lbs. (36kg)
are simulative of those created by moving or static
• 20-bit resolution, 5kHz per channel
vehicles. The actuator is double-acting allowing
both compressive and tensile forces to be applied. • will accept any voltage transducer in any channel
Various systems are available for the measurement using TEDS thermocouples
of the modulus of unbound materials. • 1024 data points per cycle
Features: • up to 16 digital input and output channels
• Designed to perform a range of tests on asphal- • Ethernet, USB,RS232 to PC communication Installation Verification and on site Training are
tic paving materials, sub-grade soils and granular available for the Universal Testing Machines, please
sub-base materials enquire.
• Double acting fatigue rated hydraulic actuator
with integral stroke transducer

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

244
Digital Controller, Accessories ASPHALT

HA-5110, HA-5110
HA-5112

HA-5105

cDAC Controller and Data Acquisition Digital Module • Profile builder gives ultimate flexibility to design
cDAC is a digital data acquisition and control unit, • 4 x 24V opto-isolated digital inputs with and store custom testing regimes
which when used with DIMENSION software, gives 100mA sink capacity (each can be config- • Test screen shows a graphical view of all con-
you the power to perform the most demanding of ured as counters) nected transducers and calculated values in real
tests with your materials testing equipment. Both • 4 x 24V opto-isolated digital outputs to time
are designed with the ease of use and reliability drive auxiliary hydraulic/pneumatic sole- cDAC Controller and Data Acquisition HA-5105
required for standard testing and the flexibilty and noid valves with 1.6A drive capacity per Shipping wt. 13lbs (6kg)
advanced capabilities required for research. channel (each can be configured as a Triaxial System T307
A Configurable design to meet your needs with PWM source) AASHTO T307
up to 7 modules (max. 4 of each type) from the • NXP LPC2148 ARM7TDMI-S based Use the HA-5110 triaxial system to perform T307
fol-lowing per cDAC unit: Interface, Acquisition, high-performance 32-bit RISC micro-con- on 8" (200mm) and 4" (100mm) specimens of
Dig-ital, Servo. Integral SIL-4 safety relay to ensure troller unbound material. It can be used to perform
the highest level of user safety. Universal input (110 Acquisition Module EN12697-25B on 4" (100mm) specimens if ordered
to 264)VAC, (47 to 63)Hz,250W power supply. • Any combination of up to 8 sensors per with steel platens.
Interface Module module (load cells, LVDTs, RTDs, strain For T307+ use the HA-5111 for 12" (300mm) and
• 100Mbit/s Ethernet TCP/IP and UDP con-
gauge bridges, pressure transducers, and 6" (150mm), 8" (200mm) and 4" (100mm) speci-
nection to PC provides for fast and robust
many, many more) mens of unbound material. It can be used for
communications
• TEDS (Transducer Electronic Datasheet) EN12697-25B if ordered with steel platens.
sensors for plug and play measurement
• RS232/422/485 serial port for connection to Triaxial System T307 HA-5110
• Synchronous acquisition of all sensor Triaxial System T307+ HA-5111
environmental chambers and other ancillary
measurements from all modules to elimi- Shipping wt. 15lbs (7kg)
equipment
nate data-skew Resilient Modulus Test System
• USB port for direct data logging • Multiple segment 5th order polynomial ASTM D4123; AASHTO TP31
• Atmel AT91SAM Smart ARM-based Micro-con- linearization of sensors for supreme accu-
Resilient modulus test system to perform AASHTO
troller for high performance racy
TP31 and ASTM D4123. Test software to meet the
Servo Module • 24-bit resolution on all channels
latest standard specifications.
• Dual 5kHz control loops per module • 5kHz acquisition rate per channel
Resilient Modulus Test System HA-5112
• Anti-alias filters to prevent high-frequency Shipping wt. 10lbs (4.5kg)
• 0.01 to 100Hz cycle frequency to meet all your
interference
testing needs. Resilient Modulus Test System
• Auto-ranging ampliers with the following
• Digital on-the-y adjustment of all PID parameters ASTM D7369
gain steps: 1/8, 1/4, ½, 1, 2, 4, 8, 16, 32,
• Multichannel selectable feedback from any sen- 64, 128 Resilient modulus test system to perform ASTM
sor (or sum of or difference between sensors) on • (0 to 10)V, 24V, and (0 to 20)mA power D7369. Test software to meet the latest standard
any acquisition card supplies for sensors specifications.
• Hardware function generator • Texas instruments TMS320DSP digital sig- Resilient Modulus Test System HA-5113
Shipping wt. 10lbs (4.5kg)
• Bumpless transfer between control methods nal processor
• Texas instruments TMS320DSP digital signal Dimension Features
processor • Transducer database to store and manage your
sensors
• 16-bit Analog Voltage (±10V and (0 to 10V) and
Current (±40mA, (0 to 20)mA, and (4 to 20mA) • Standard test library for quick and reliable
control output for servo valve or other control testing to ASTM, AASHTO, CEN Standards
device • Configurable waveform and summary data
capture allows total control over the information
gathered during a test

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 245
ASPHALT Universal Test Accessories

HA-5117

HA-5115
HA-5114

HA-5121 HA-5120
HA-5118 HA-5119

Simple Performance Test Direct Compression and Tension Precision Unbound Material Analyzer
AASHTO TP62 EN 12697-26 (D & E) The Precision Unbound Material Analyzer (PUMA)
Test system to perform dynamic modulus accord- Direct compression and tension measurement sys- is a new type of laboratory test equipment
ing to AASHTO TP62 Simple Performance tem to perform EN 12697-26 Annex D and E. Test designed to fill the gap between expensive and
Test. Test software to meet the latest standard software to meet latest standard specifications. complex laboratory tools, such as triaxial cells, and
specifications. Direct Compression and Tension HA-5118 more empirical methods, such as the California
Simple Performance Test HA-5114 Shipping wt. 5lbs (2.3kg) Bearing Ratio test. It is designed to generate real-
Shipping wt. 15lbs (7kg) Dynamic and Static Creep Flow istic values of modulus for use in road pavement
Indirect Tensile Creep EN 12697-25 (A) design. The PUMA can be used to test unbound,
ASTM D6931 hydraulically bound and asphaltic materials. It has
Dynamic and static creep (flow) measurement sys-
been designed as a low cost, easy-to-use practical
Indirect tensile creep is determined by apply- tem with confining stress to perform EN 12697-25
tool, but one that is capable of generating scien-
ing a static load of fixed magnitude along the Method B Test software to meet latest standard
tifically meaningful data (Modulus and Resistance
diametral axis of a specimen. The horizontal and specifications. Note: this item can be used to per-
to Permanent Deformation), for use in road pave-
vertical deformations measured near the center of form EN 12697-25 Method A if a 3.8" (96mm) top
ment design. It can be used to test specimens
the specimen are used to calculate a tensile creep platen is ordered. Software is also available to per-
made from granular material, soil or lightly stabi-
compliance as a function of time. It can also be form Flow Time and Flow Number.
lized material etc. with a maximum particle size of
used for other tests, such as ASTM D6931. Only Dynamic and Static Creep Flow HA-5119
Shipping wt. 515lbs (7kg) 1.24" (31.5mm).
available with hydraulic option.
Indirect Tensile Creep HA-5115 Tack Coat Quality Tester The Puma is proposed as a direct equivalent to
Shipping wt. 10.2lbs (4.6kg) Proposed standard method of test for determining the Springbox with the advantage that initial stress
Indirect Tensile Modulus and Fatigue the tack coat quality of asphalt pavement in the conditions can be accurately controlled. It is a
EN 12697-26 (C & E) field or laboratory. simple test, suited to generic specification, which
Tack Coat Quality Tester HA-5121 holds the promise of increased confidence in
Indirect tensile stiffness modulus and fatigue mea-
Shipping wt. 7lbs (3.2kg) pavement foundation design, particularly in cases
surement system EN 12697-26 (Annex C and E).
where favorable weather conditions during con-
Test software to meet latest standard specifications.
struction result in unrepresentative high-Dynamic
Indirect Tensile Modulus & Fatigue HA-5116
Shipping wt. 25lbs (11.3kg) Plat Test (DPT) values or in cases where stabilized
soils or cold-mix asphalt are employed, horizontal,
Dynamic and Static Creep
and the number of load cycles if desired.
EN 12697-25 (A)
Precision Unbound Material Analyzer HA-5120
Dynamic and static creep measurement system to Shipping wt. 10lbs (4.55kg)
perform EN 12697-25 (Method A) and DD226. Test
software to meet latest standard specifications.
Dynamic and Static Creep HA-5117
Shipping wt. 6lbs (2.7kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

246
Hamburg
g Wheel Tracker ASPHALT
Installation Verification and on site Training are
available for the Hamburg Wheel Tracker, please Includes full software control of arms individually at
enquire. outset and completion of test, with stainless steel
frame, includes full software package, traceable
calibration certificate and desk PC. To perform
testing according to AASHTO T324
Hamburg Wheel Tracker, 240V 50/60Hz HA-5300.4F
Ship wt. 1520lbs. (687kg)

HA-5300.4F
Specifications
Variable between 15 and 30
Wheel Speed cycles (30 to 60 passes) per
minute
Wheel Load 158 ± 1.0lbf (705 ± 4.5N)
Variable Speed Range 15 to 30 RPM
2-4" (50 - 100mm), different
The
T Cox Hamburg will output more precise and Slab Thickness thicknesses can be tested
with spacers
accurate
a results than any other Hamburg machine
– guaranteed. Rut Depth
2" (50mm)
Transducer Range
Features:
F
Temperature Range Ambient to 158 ºF (70°C)
• Full super rigid stainless steel construction
220-240V 15 A, 1 Ph
• The most rugged, precise and accurate
Electrical Supply (single phase with a neutral
Hamburg wheel tracker available and ground)
• Auto arm lift for fully automated test procedure 57" x 55" x 50"
Dimension
and user safety (W x D x H) (1430 x 1380 x 1260mm)
Hamburg Wet and Dry Wheel Tracker • True sinusoidal motion
Desktop PC Included
AASHTO T324; EN 12697-22; Various State • Mechanical recirculating water bath for accurate
standards control of the water temperature to better than Accessories Model
The Hamburg (Immersion) wheel tracking test ±0.5C *Stainless steel molds
is used to evaluate the resistance to rutting and • Two displacement transducers with a resolution 12.6" x 10.2" x 2.4" HA-5300.1
moisture susceptibility of asphalt mixtures. AASH- (320 x 260 x 60mm)
of 0.01mm, positioned in line with the wheel to
TO-T324 is the generally referred to test standard, ensure accurate measurement of the rut Stainless Steel molds:
although many states modify this procedure to 12.6" x 10.2" x 4" HA-5300.2
• Continuous rut and rut profile measurement
meet their specific requirements. Outside of the (320 x260x 100mm) deep
throughout the test
U.S. both AASHTO-T234 and EN12697-22 are Stainless steel molds
followed. • Analysis software to automatically pick the
12" x 12" x 2" HA-5300.3
inflection point and analyze the output data (305 x 305 x 50mm)
What differentiates the Hamburg from other wheel
tracking methods is the use of water to condition • Air hood option for dry tests
Stainless steel molds
the temperature of the specimens rather than air. • Stainless steel and rubber wheels available 12" x 12" x 4" HA-5300.4
It is believed that the water, in some tests, strips • Built-in timer to start tests automatically (305 x 305 x 100mm)
the aggregate which creates a tertiary phase that • AASHTO T324, a variety of DOT methods and *Plastic mold for double cores
is distinct from the permanent deformation which EN12697-22 6" tested simultaneously to be
occurs in dry wheel tracking tests. The use of stain- inserted in stainless steel mold HA-5300.5
• Anytime remote access support
less steel wheels on a weighted cantilevered arm, 12.6" x 10.2" x 2.4"
• Quality build in the USA (320 x 320 x 260mm)
in conjunction with water has led some people to
refer to Hamburg wheel tracking as a ‘torture test’. Software: Stainless steel wheel
• User friendly, intuitive and reliable Windows® HA-5300.6
Certainly it is the case that less well constructed AASHTO T324-02
machines will shake to pieces due to the aggres- software developed using LabVIEW™
Rubberized Stainless steel wheel
sive nature of the test. The Cox Hamburg is man- • Specifically written to meet AASHTO and ASTM HA-5300.7
EN 12697-22
ufactured in California from thick solid stainless standards
steel. Painted steel panels and parts are not an Powered winch and
• The user interface can be translated into the HA-5300.8
option for the Hamburg test. Our Hamburg is built stainless steel mast
user’s preferred language – please inquire
to last decades not just a couple of years, which is Stainless steel base
why it comes with a five year warranty. • Stored test data can be analyzed and compared HA-5300.9
and working parts option
with other test data utilizing a spreadsheet
A rigid frame construction is also essential for accu-
package Guarding, stainless steel HA-5300.11
rate results. Cheaply produced machines will flex
machine and quality of test results go hand in • Utilities are included for curve fitting of acquired Chiller assembly HA-5300.12
data; testing of system’s inputs and outputs;
hand. and vibrate with deeper rut depths. Quality Air Heating hood HA-5300.13
phase correction and a transducer database for
storing calibration factors
*Included with machine– 2 of each.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 247
ASPHALT Steel Roller Compactor

Specifications
Maximum 6750 lbf (30kN) over 12"
Roller Load (305mm) roll width
±6" (150mm) or ±8"(200mm)
Trolley Travel

Speed Variable up to 10 cycles/min.

Slab Thickness 1.6 to 5.3" (40 to 135mm)
Electrical Supply 240V 50Hz, 1 Ph
23.6" x 57" x 74.8"
Dimensions
(600 x 1450 x 1900mm)
Working Space 63" x 67" x 79"
Required (WxDxH) (1600 x 1700 x 2000mm)
Desktop PC Not required

Hydraulic Compact Steel Roller Compactor

ASTM D04 - WK34713; EN 12697-33 STEEL
ROLLER
The Roller Compactor is considered to be the
method of laboratory specimen compaction
that results in slabs of asphaltic paving materials HA-5700.5F
with properties that most closely simulate those
of materials in the highway. Slabs can be com-
pacted to target mixture densities using loads that
are equivalent to those of full-scale compaction • Slabs can be used as wheel-tracking specimens, Molds Required for Operation
equipment. Model
and cored to make indirect tensile test speci- (chose per requirements)
This compactor is hydraulically powered and con- mens or cut into beams for 4-Point Bending Test Stainless steel mold 12.6" x
trolled by a programmable logic controller (PLC) • Roller Compactor molds will fit Cox & Sons 10.2.75" x 2" (320 x 260 x HA-5700.5
connected to an HMI (Human Machine Interface), Wheel Trackers so that compacted slabs can be 50mm) deep
which the operator can use to select the number wheel-tracked without de-molding Stainless steel mold 12.6" x
of passes. A manual pressure control is adjusted 10.2.75" x 4" (320 x 260 x
• Maximum compaction load of 30kN (6750lbf) HA-5700.6
to set the required load. The main function of the 100mm) deep
per 305 mm (12 inch) roll width (equivalent to
Compact Steel Roller is to produce slabs for beam
largest on-site static rollers) Steel and aluminum quick
fatigue and wheel tracking tests.
• Speed control release mold for roller com-
Features: pactor or wheel tracker, 12" HA-5700.3
• HMI for operator selection of number of passes x 15.75" x 2" (305 x 400 x
• Steel wheeled roller segments
• Vibrating roller option with adjustable frequency 50mm) deep
• Solid machine frame
to simulate on-site vibratory rollers. Steel and aluminum quick
• Optional heated head for reducing mixture stick- release mold for roller com-
Hydraulic Compact Steel Roller Compactor HA-5700.5F
ing to roller during compaction pactor or wheel tracker, 12" HA-5700.4
Ship wt. 79 lbs. (36kg)
• Model for compaction of 320 x 260mm (12.6 x x 15.75" x 4" (305 x 400 x
100mm) deep
10.2 inch) and 305 x 400 mm (12 x 15.75 inch)
slabs Optional Accessories Model
• Slab depth from 40 to 135 mm (1.6 to 5.3 inch)
Optional heated Head HA-5700.2
Installation Verification and on site Training are Vibration option to simulate
available for the Steel Roller Compactor, please conditions in-situ HA-5700.7
enquire.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

248
Bending Beam Test ASPHALT

Specifications
Force Transducer 2250lbf (10kN)
Specimen
±0.09" (3 x ±2.5mm)
Transducer Range
Actuator Stroke 0.4" (10mm)
Frequency 0.1 to 60 Hz
Electrical Supply 400V 50Hz, 3 Ph
100-145psi (7-10 bar)
Compressed Air
@ 100 L/min (3.5cfm)
Test Frame 41.5" x 43" x 83"
Dimensions (1050 x 1100 x 2100mm)
Working Space 81" x 83" x 90.5"
Required (WxDxH) (2050 x 2100 x 2300mm)
HA-5500.3F
Desktop PC Included

Large Hydraulic, Four-Point Bending Beam Machine • Utilizes Star servo valve with “Sapphire software developed using LabVIEW™
ASTM D7460; AASHTO T321; EN 12697-24 Annex Technology” • Specifically written to meet AASHTO and ASTM
D, EN 12697-26 Annex B • Unique, three-transducer, on-specimen deflec- standards
The CRT-LH4PT-BB uses advanced servo-hydraulic tion measurement system
• The user interface can be translated into the
technology and a high-speed digital data acquisi- • Accepts various beam sizes: 380 to 660mm in user’s preferred language – please
tion and control system together with user-friendly length and 50 x 50mm and 100 x 100mm cross
inquire
software. During testing both graphical and tab- sections.
ular data are displayed on screen and test data • Stored test data can be analyzed and compared
• Temperature Controlled Cabinet range -20 to
is stored to disc in Microsoft Excel™ compatible with other test data utilizing a spreadsheet
30°C
format. The test frame is housed in a Temperature package
• Sinusoidal controlled strain or controlled stress
Controlled Cabinet with fan-assisted air circula- • Utilities are included for curve fitting of acquired
fatigue test modes
tion and a temperature range of -20 to 30°C. The data; testing of system’s inputs and outputs;
unique constant torque clamping and three-trans- • Constant torque motorized specimen clamp- phase correction and a transducer database for
ducer deflection measurement system of the ing to eliminate errors due to localized beam storing calibration factors
indentation Large, Hydraulic Four-Point Bending Beam,
CRT-LH4PT-BB can be configured to accept differ-
ent beam sizes. This means that the ratio between • Self-contained loading system 400V 50Hz, 3PH HA-5500.7F.3
• User friendly software for determination of 208-230V 60Hz, 3PH HA-5500.2F.3
beam dimensions and maximum aggregate size of
fatigue resistance and stiffness modulus Ship wt. 1435 lbs. (650kg)
test specimens will satisfy the requirements of the
relevant European specifications. • Supplied with certification of a UKAS-accredited Accessories Model
Features: calibration Dummy PVC beam 2" x 2" x
HA-5400.1
• Frequency range 0.1 to 60Hz • Covered for noise reduction 15" (50 x 50 x 380 mm)
• High-quality, Servo-Hydraulic Four-Point Software: Dummy PVC beam 4" x 4" x
Bending Machine HA-5400.2
• User friendly, intuitive and reliable Windows® 26" (100 x 100 x 660 mm)
• Double-acting, fatigue-rated hydraulic actuator
Installation Verification and on site Training are
with integral stroke transducer
available for the Bending Beam Machine, please
enquire.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 249
ASPHALT Bending Beam Test

Specifications
Force Transducer 2248lbf (10kN)
Specimen
± 0.04" (1mm)
Transducer Range
Actuator Stroke 0.4" (10mm)
Frequency 0.1 to 30 Hz
Electrical Supply 110/260V 50/60Hz, 1 Ph
100-145psi (7-10 bar)
Compressed Air
@ 600 L/min (21cfm)
Test Frame 18" x 7.5" x 22.5"
Dimensions (440 x 190 x 570mm)
Data Acquisition 15" x 11" x 5.5"
Enclosure (360 x 280 x 140mm)
Working Space 32.5" x 65" x 83"
Required (WxDxH) (826 x 1650 x 2100mm)
Desktop PC Included

HA-5400.3F

Stand-Alone, Four-Point Bending Beam Machine • Constant torque motorized specimen clamp-
Accessories Model
ASTM D7460; AASHTO T321; EN 12697-24 Annex ing to eliminate errors due to localized beam
D, EN 12697-26 Annex B indentation Dummy PVC beam 2" x 2" x 15"
HA-5400.1
The CS-SA4PT-BB uses advanced servo pneumatic • Self-contained loading system (50 x 50 x 380 mm)
technology and a high-speed digital data acquisi- • User friendly software for determination of Cabinet, temperature-controlled HA-5400.3
tion and control system together with user-friendly fatigue resistance and stiffness modulus
software. During testing both graphical and tab-
Software:
ular data are displayed on screen and test data is
• User friendly, intuitive and reliable Windows®
stored to disc in Microsoft® Excel® compatible
software developed using LabVIEW™
format. The clamps are at 118.5mm (4.67 inch)
centers (the distance between the outer clamps is • Specifically written to meet AASHTO and ASTM
335.6mm (14 inches) according to AASHTO speci- standards
fications but the height and width of the beam can • The user interface can be translated into the
be varied). user’s preferred language – please inquire
Features: • Stored test data can be analyzed and compared
• Frequency range 0.1 to 30Hz¹ with other test data utilizing a spreadsheet
• Low cost pneumatic stand alone four point package
bending machine • Utilities are included for curve fitting of acquired
• Utilizes a low-friction actuator and high perfor- data; testing of system’s inputs and outputs;
mance ceramic spool servo-valve phase correction and a transducer database for
storing calibration factors Installation Verification and on site Training are
• On-specimen measurement system removes
Four-Point Bending Beam, 110/220V 50/60Hz HA-5400.3F available for the Bending Beam Machine, please
errors due to frame flexure
Ship wt. 79 lbs. (36kg) enquire.
• Accepts AASHTO beam sizes
• Sinusoidal controlled strain or controlled stress
fatigue test modes

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

250
Gyratory ASPHALT
Installation Verification and on site Training are
available for the Gyratory, please enquire.

Superpave GYR Gyratory Accessories Included Model

ASTM D6925; AASHTO T312; CS9010-1115;
Specimen Extruder, Manual (1) HA-5000.1
CS9010-1230; SHRP M-002, T 0736-2011; TEX-
6" (150mm) Internal Ø
241-F; EN 12697-10
mold & platens with specimen HA-5000.2
Compaction is achieved by the application of a
temperature measurement (1)
vertical stress (normally 600KPa (87psi)) via end
platens to a known mass of asphaltic mixture 6" (150mm) Internal Ø
HA-5000.3
within a 150 and 100mm (6 and 4inch) internal Ø mold & platens (1)
mold. The longitudinal axis of the mold is rotated Shear force display HA-5000.13
(gyrated) at a fixed angle to the vertical while the
platens are kept parallel and horizontal. During Specimen Temperature
HA-5000.14
compaction the height of the sample is automat- Measurement
ically measured and both the mixture density and 6" (150mm) circle filter papers
void content calculated. HA-5000.15
(100pk)
Features:
• Automatic mold insertion and retraction on side
table which allows cooling time before extraction
Accessories Model
without loss of compaction time (especially
important for rubberized asphalt) 4" (100mm) Internal Ø
mold & platens, slotted for HA-5000.4
• 150 mm and 100 mm (6 and 4 inch) internal Ø
emulsion mix
molds can be tested without changing parts
HA-5000 • Cold mix (emulsion) materials can be compacted 4" (100mm) Internal Ø
and the expelled fluid collected mold & platens, slotted– includes
features for specimen tempera- HA-5000.5
• Ethernet and multiple USB connections for data
acquisition and control system ture measurement
Specifications
• User friendly LabVIEW™ software displays 6" (150mm) Internal Ø
Speed Normally 30 rpm
results in real time mold & platens, slotted for HA-5000.6
Normally 87psi (600 kPa) • Machine calibrated with traceable equipment
Stress emulsion mix
Maximum 145psi (1000 kPa)
• Option for mold up to 300 mm (11.8 inch) high
Actuator Stroke 9.85" (250mm) 4" (100mm) Internal Ø
Software: HA-5000.8
mold & platens (1)
Internal Angle
of Gyration
0.2 to > 2° • User friendly, intuitive and reliable Windows®
4" (100mm) Split Mold HA-5000.9
software developed using LabVIEW™
115V +-10% 50/60 Hz
Electrical Supply • Software allows 3 methods of compaction – 6" (150mm) Spacer to compact
230V +-10% 50/60 Hz HA-5000.10
number of gyrations, height and target density. 2.5" (63mm) height on Gyratory
Specimen Ø mm
6 " (150mm) and 4 (100mm) The operator is guided through every step of the Spacer, 100mm to compact
(inch) HA-5000.11
compaction 63mm height on HA-5000
100-145psi (7-10 bar)
Compressed Air • Real-time display of current height, density &
@ 350 L/min (12.5cfm) Calibration kit for internal
void content (%) Data is recorded to disk at regu- HA-5000.12
angle lead
Mixtures Wet, dry and rubber lar intervals for further analysis
31" x 40" x 76" • Utilities are included for transducer check, diag- Specimen Extruder, Automatic HA-5000.17
Dimensions
(780 x 1000 x 1920mm) nostic routines and calibration
Working Space Superpave Gyratory, 115V 50/60Hz HA-5000 4" (100mm) Circle Filter Paper
79" x 79" x 87" HA-5000.16
Required Superpave Gyratory, 230V 50/60Hz HA-5000.4F (100 pk)
(2000 x 2000 x 2200mm) Ship wt. 1120 lbs. (508kg)
(WxDxH)
Desktop PC Included

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 251
ASPHALT Gyratory
Specifications
10 to 1000 kPa
Verticle Load (1000 kPa–10 bar)
(150mm) (800 kPa–8 bar)
(700 kPa–7 bar)
Verticle Load 23 to 1500 kPa
(100mm) with 7 bar compressor
Vertical Load Control Auto electronic system HA-5950.1, HA-5950.2
Adjustable from 5 to 60
Gyration Rate
work cycles/min.
Gyratory Angle
0 to 2.4°
Adjustable
Number of Cycles Adjustable from 1 to 5000
Electrical Supply 230V 50/60 Hz
100-145psi (7-10 bar) HA-5950.3, HA-5950.4
Compressed Air
@ 350 L/min (12.5cfm)
Mixtures Wet, dry and rubber
25.2" x 19.7" x 41.3"
Dimensions
(640 x 500 x 1050mm)

Accessories Model
Specimen Cylinder, (100mm) HA-5950.1
Specimen Cylinder, (150mm) HA-5950.2
Show with
Cylinder w/Holes, (100mm) HA-5950.3 HA-5950.12
Cylinder w/Holes, (150mm) HA-5950.4 Bench
Penetration Piston, (100mm) HA-5950.5
Penetration Piston, (150mm) HA-5950.6
Metallic Disk, (100mm) HA-5950.7
HA-5950.4F
Metallic Disk, (150mm) HA-5950.8
Superpave Gyratory execution, as well as data acquisition and data
Filter Paper, (100mm) HA-5950.9
ASTM D6925; AASHTO T312; CS9010-1115; processing.
Filter Paper, (150mm) HA-5950.10 CS9010-1230; SHRP M-002, T 0736-2011; TEX- • Rigid steel frame ensuring excellent angle
241-F; EN 12697-10 control.
Auto Specimen Extruder HA-5950.11*
This Gyratory Compactor is used to simulate and • Electro-pneumatic action with servo-controlled
Bench HA-5950.12 reproduce the real compaction conditions of regulator.
Wheels HA-5950.13 actual road paving operations in determining the
• Full-color, touch-screen control unit
compaction properties of asphalt.
Internal Angle Measurer HA-5950.14 • PC Software for control, acquisition and data
Its fully-automatic compaction operation provides
Calibration Check for Internal processing.
HA-5950.15 that both rotary and vertical forces are applied to
Angle Measure • Optional shear stress measurement.
the specimen by the mechanical head. The gyra-
* Requires HA-5950.12 Bench for mounting. tory‘s rigid, steel frame ensures that excellent • Optional integrated balance.
angle control is maintained through the testing • Optional integrated extruder.
operation. The machine provides direct connection to a LAN
Load is applied by an electro-pneumatic cylinder, network and the internet, which allows for remote
which is servo-controlled by a precision pressure machine control, as well as remote communication
regulator while the height is measured by a lin- with technicians for immediate diagnostics and
ear transducer. Gyratory motion is generated by problem solving and for software updates.
an eccentric high-precision system allowing an Unlimited memory storage with: 2 USB ports, 1 SD
easy set up with precision and constant angle of card. Machine is factory calibrated and supplied
gyration. The rotation speed is controlled by an with the internal angle set to 1.16° as specified by
inverter through on-board computer control. ASTM, AASHTO Specifications.
In addition to testing standard mixes the Gyratory Superpave Gyratory, 230V 50/60Hz HA-5950.4F
can also test cold emulsified asphalt mixes using Ship wt. 529lbs. (240kg)
one of the available perforated molds. Machines
are factory calibrated to the selected internal
angle. The touch-screen, icon-based interface
HA-5950.14 allows for easy test parameter set up and test

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

252
Overlayy Tester ASPHALT

Installation Verification and on site Training are

available for the Overlay Tester, please enquire.

Specifications
Measurement
0.01
Interval
Cyclic triangular and
Waveform Type constant displacement or a
combination
Maximum 0.025 to 0.2
Displacement (0.6 to 5.1mm)
Resolution of
Displacement 0.00004" (1 μm)
Measurment
Control Loop
>1000 Hz
Rate
Load Cell
5500 lb (25kN)
Capacity
Load Cell
0.25 %FS
HA-5600 Accuracy
Cycle Time 5 to 1000 s
Cycle Time
Measurement 0.1%
Resolution
Overlay Tester • Designed
D i d according
di tot th
the proposed
d ASTM
AST
ASTM WK26816; CS-TOT Temperature
• Integral surface-mounted, touch-screen control 23 to 104°F (-5 to 40°C)
Control Range
In recent years many mixture design methods have • Double GSF cold rolled container slides for ultra
Temperature
produced materials that are stiffer, leaner and more accurate inline sample deformation ±0.9°F (0.5°C)
Control Accuracy
resistant to rutting, however, such materials are
• Intelligently designed specimen gluing and Ambient Tem-
often more susceptible to fatigue and reflection 59 to 86°F (15 to 30°C)
“zero stress” carrying frame perature Range
cracking. The Texas Overlay Tester (CS-TOT) was
• Fitted with high performance hydraulic actuator (0 to 100)% load
designed to simulate the expansion and contrac- Test End
and powerpack reduction and/or
tion movements that occur in the vicinity of joints Conditions
• Ergonomically designed for easy operation (0 to 10000) cycles
or cracks and which result in reflection cracking in
overlays. With the CS-TOT it is possible to char- Overlay Tester, 120V 60Hz HA-5600 Specimen Dims
Overlay Tester, 240V 50Hz HA-5600.5F Length: 5.9 ± 0.08" (150 ± 2mm)
acterize both the crack initiation and crack propa- Height: 1.5 to 2 ± 0.02" (38 to 50 ± 0.5mm)
gation properties of asphalt mixtures. Cox & Sons Ship wt. 1102 lbs. (500kg)
Width: 3" (76mm)
has developed the CS-TOT, which is a dedicated,
Plate Dims
state-of-the-art piece of equipment for carrying Accessories Model Length: 11.8" (300mm)
out this test. Height (Optional): 0.51 or 0.75" (13 or 19mm)
Disc-shaped, compact Width: 5.9" (150mm)
The Overlay Tester includes the following: “Zero HA-5600.1
tension fixtures
Stress” carrying frame to align the two base plates and Base Plate Material Stainless steel
fix the specimen prior to testing with specimen Semi-circular bending * Base Plate 95 (Not lower than that
HA-5600.2
alignment; Cutting Template; Two-part epoxy with (-5 °C to + 40 °C) Hardness (Brinell) of 6061-T6 aluminum)
minimum 24 hour tensile strength of 4.1MPa and
0.25" (6.25 mm) spacer bar for Plate Groove 0.059 x 0.051"
24hr shear strength of 13.8MPa in accordance with HA-5600.4 Depth x Width (1.5 x 1.3mm)
plate separation and alignment
Tex-614-J (DevconTM two tone 30-Minute Plastic
Plate Groove
Steel Epoxy Cement); 4 mm spacer bar for plate 0.25" (6.35mm)
Separation
separation; 4.5 kg (10 lb) weight (in shape of the 10 lb (4.5kg) weight
specimen to ensure load is spread evenly and does (in the shape of the specimen to Initial Separation
0.079" (2mm)
ensure load is spread evenly and HA-5600.5 of Plates
not overhang the edges of the specimen); 1/4 inch
does not overhang the edges of Vertical move-
width adhesive tape; Permanent marker, Glue the specimen)
removing agent and Glue application tool. ment of sample
<3
(% of crack
Features: opening)
Calibration kit HA-5600.6
• Dedicated no compromise Texas Overlay Dimensions 62" x 25" x 43"
machine One Pair of Platens (WxDxH) (1580 x 650 x 1100mm)
HA-5600.7
(3 Pairs are recommended)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 253
ASPHALT Bitumen Testing

H-1640B.4F

H-1641T

Pressure Aging Vessel (PAV3), 230V 50/60Hz Data acquisition of temperature, pressure, and Vacuum Degassing Oven (VDO Touch)
ASTM D6521-05; AASHTO R28-06; EN 14769 time is collected throughout the aging process. ASTM D6521-05; AASHTO R28-06
The PAV3 pressure aging vessel is used to simu- Once the aging process is complete, a .csv file can The vacuum degassing oven (VDO touch) is used
late in-service oxidative aging of asphalt binder be created and saved via the USB port on the front to precisely and accurately degas pressure-aged
according to procedures developed by the Strate- of the PAV3. Once the .csv file has been created, it binder samples and is designed for rapid removal
gic Highway Research Program (SHRP). The PAV3 can easily be viewed and manipulated in Microsoft of entrapped air bubbles in asphalt specimens
consists of a vertical, stainless steel pressure ves- Excel® or other spreadsheet programs. to the required 15 ±1.0kPa (25.5Hg). The net-
sel in a stainless steel cabinet with encased band The PAV3 sample holder is a one-piece, solid work-ready 7in (178mm) touch-screen controller
heaters, a precision sample holder for simultane- device requiring no assembly and is easy to achieve features easy menu-driven operation in multiple
ous testing of ten specimens, a set of ten TFOT an accurate level position with the leveling ring in language options for fast programming of vacuum,
specimen trays, a pressure controller, temperature the vessel. There is also room for a small bubble temperature values and soak times. The controller
controller, pressure and temperature measurement level between slots for verification purposes. display indicates time, temperature, and current
devices, temperature and pressure recorder, and a process stage, with alerts at the end of each test.
The PAV3 includes a network-ready modem, which
specimen loading and unloading tool. When connected to a network with an Ethernet
provides connection to the internet, permitting the
The H-1640B.4F PAV3 features a compact, bench- cable, the VDO Touch can be operated remotely
user to access the PAV3 with a mobile device or PC
top design with integral ASME code section VIII, via smart phones, tablets, or PC’s. USB Ports allow
using a VNC viewer app program. VNC connection
division 1; 1992 A 93 pressure vessel controlled easy software upgrades.
enables the user to connect, monitor, and control
using a 7", full-color, touch-screen display, which the PAV3 from a remote location. The PAV3 can The compact, table-top unit is constructed of stain-
is tilted for greater visibility. Operating pressure be programmed with a custom IP address, so the less steel with a hinged lid to conserve space while
is 2.10 ±0.05 MPa (304psi). Temperature is 80 to number of PAV3s on a single network is essentially allowing easy access to the stainless steel vacuum
115°C (176 to 239°F) and programmable from endless. chamber. The oven holds up to (8) 4 oz. (114ml) or
50 to 150°C (122 to 302°F). Between 80 to 115°C (4) 8 oz. (236ml) sample containers and features a
Pressure Aging Vessel, 230V 50/60Hz H-1640B.4F
(176 to 239°F) the tolerance is well within ± 0.1°C. Shipping wt. 433 lbs (193kg) self-contained, automatic vacuum system.
Temperature uniformity is ± 0.5°C. Pressurization Temperatures in the VDO Touch vacuum cham-
H-1640B.4F PAV3 Accessories & Components
is programmable from 1 hour to 99 hours. This ber are measured by a platinum RTD probe with
enables AASHTO R28, ASTM D5621, and EN Description Model
a range from ambient to 200°C with accuracy to
14769 specifications to be met without any special UPS battery backup system H-1640.1 ±5°C. Soak and degassing times are both pro-
programming and also enables greater freedom PAV verification kit H-1640.2 grammable up to 4,320 minutes. The rugged
for research and development projects. Real-time stainless steel cabinet, chamber and cover are easy
PAV o-ring H-1640.3
graphs are visible from the touch-screen control- to maintain, and the removable cover features a
ler while the unit's network-ready modem enables CGA adapter H-1640.4 heat-resistant glass viewing window for monitoring
the PAV3 to be controlled from PCs and mobile High-pressure hose H-1640.5 purposes The VDO includes (4) 236ml (8oz) sample
devices when connected to a network. tins, and a specimen removal tool for easy loading
Specimen pans set H-1640.6
and unloading of samples. Dimensions: 24" x16" x12"
Regulator, single-stage H-1640.7
(610 x 406 x 304mm).
Pan handling tool H-1640.8
See Accessories and Components for the VDO Touch
Specimen rack H-1640.9 on page 254

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

254
Bitumen Testing ASPHALT

H-1642

H-1642T

Features: Bending Beam Rheometer transducers Dimensions: 49" x 49" x 41" (1,245 x
• Automated tabletop degassing oven for rapid ASTM D6648; AASHTO T313-02 1,245 x 1,040mm). An adequate compressed air
removal of entrapped air bubbles in asphalt The bending beam rheometer (BBR) performs flex- source must be supplied by user.
specimens ural tests on asphalt binder and similar specimens Bending Beam Rheometer, 120V 60Hz H-1642
per tests, initially developed by the Strategic High- Bending Beam Rheometer, 230V 50Hz H-1642.5F
• Network-ready, 7" touchscreen controller pro-
way Research Program (SHRP), which consist of a Shipping wt. 520 lbs (235.8kg)
vides simple control to input vacuum, tempera-
constant force being applied to a specimen in a Bending Beam Rheometer with Touch Screen
ture and soak time values
chilled fluid bath in order to derive specific rates ASTM D6648; AASHTO T313, TP87 BS EN 14771
• Ethernet cable connection enables remote
of deformation at various temperatures. The com- The Bending Beam Rheometer 3 (BBR3) has been
operation via smart device
plete BBR system consists of a fluid bath base unit, designed to perform flexural tests on asphalt
• Capacity for eight 4oz (118ml) or four 8oz a three-point bend test apparatus, which is easily binder and similar specimens as part of the PG
(236ml) sample containers removed from the base unit for specimen loading grading system according to Superpave. The BBR3
and unloading, an external cooling unit with tem- is a state of the art internal computer system incor-
Specifications
perature controller and a calibration hardware kit porating touchscreen technology. The BBR3’s new
Operating pressure 15±1.0 kPa (25.5Hg) with carrying case. The unit features an integral, external cooling unit is now more compact and
stainless steel load frame and in-line, blunt-point omits less noise during operation. Programmable
Temperature range Ambient to 200°C
loading shaft. The large, easy-to-read digital dis- test parameters allow users to input and save their
Temp. resolution 0.1º C play shows load, displacement, and bath tempera- own unique settings, allowing the BBR3 to satisfy a
ture for ease of setup and operation. Real-time dis- diverse range of testing applications.
Accuracy ± 5º C
placement, loading, and temperature graphs are The BBR3 is made up of a fluid bath base with a
displayed during the test cycle and can be re-plot- built-in touchscreen computer, load frame, exter-
Vacuum Degassing Oven, 120V 60Hz H-1641T ted and re-scaled as needed for easy viewing. nal refrigeration unit, and a calibration kit with
Vacuum Degassing Oven, 230V 50/60Hz H-1641T.4F The BBR uses a linear, variable-displacement trans- carrying case. During operation, a known force is
Shipping wt. 185 lbs (84kg) ducer (LVDT) with a range of 6.35mm and accu- applied to the center of a horizontally supported
H-1641T VDO Accessories & Components racy to ±2mm measures deflection. The tempera- specimen beam submerged in a cold liquid bath
ture-compensating 500g load cell with mechanical while internal software calculates the flexural creep
Description Model overload protection ensures accurate load results. stiffness of the beam. Used in part to determine
UPS battery backup system H-1640.1 Safe, rapid cooling of the ethylene glycol mixture a sample’s critical cracking temperature and low
VDO verification kit H-1641.7 test fluid to -40° to 25°C is provided by a mechan- temperature PG grade, the BBR3’s -40°C to 25°C
ical refrigeration system. Process temperature is temperature range is efficiently calculated by a
Sample container, 8 oz. (236ml)
H-1641T.1 controlled and monitored by two, independent, platinum RTD measuring device. The 500g load
12 (pk)
platinum RTD temperature transducers maintain- cell and changeable specimen supports easily
Sample container, 4 oz. (118ml) ing temperature stability. transition the BBR3 for crack sealant testing, and
H-1641T.6 the free standing external cooling unit ensures that
12 (pk) The BBR comes with a pre-loaded software pack-
age, which allows for device configuration, daily the cooling fluid maintains a constant temperature.
VDO verification thermometer H-1641T.2
verifications, test setup, test initiation, and report- Programmable test parameters allow the user to
VDO vacuum verification gauge H-1641T.3 ing. It also includes five aluminum specimen molds define a test and save those parameters for later
VDO calibration block H-1641T.4 with mylar strips, a Calibration Kit with required testing. Predefined test parameters include the
VDO vessel cap H-1641T.5 weights, and confidence beam. Calibrated test standard ASTM BBR test, as well as the crack seal-
weights and a certified LVDT (NIST-traceable). The ant test and the sliver test.
easy-to-use software allows daily verification and The BBR3’s programmable test parameters
periodic calibration of load cell, LVDT, and RTD

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 255
ASPHALT Bitumen Testing

H-30068.2F

H-30069.2F
H-30068.6

include: Deflection Plot, Load Plot, Bath Tempera- Rolling Thin Film Oven
Specifications
ture, Stirrer Speed, Specimen size, Testing Times, ASTM D2872; AASHTO T240; EN 12591;CTM 346
Load, and Testing Company. Double-walled, 16-gauge
The Rolling Thin Film Oven (RFTO) is used to mea- welded steel exterior.
The BBR3 features a Displacement Transducer sure the effect of heat and air on a moving film of Construction
18-gauge corrosion-resistant,
accuracy of 0.097 micron, a measurement reso- semi-solid asphaltic material and is an indicator of stainless steel interior
lution of 0.006g, and a Deformation Accuracy of the approximate change in properties during con- Insulation 3.5" (89mm) of
Insulation
0.097. While other BBR models may favor Peltier ventional hot-mixing. The results of this treatment high density fiberglass
cooling, the BBR3 operates more efficiently with- are determined from measurements of the asphalt Programmable
out it. properties before and after the test. Through the Controller
microprocessor, UL listed
Reporting features on the new BBR3 include the use of a programmable, temperature controller
Measured Temperature:
ability to name your sample and enter any import- and a 4-digit, digital display system, along with a Temperature 4 digit red LEDs
ant notes. With the new BBR3, your data is col- solid-state heater and 200-watt heating element, Display Temperature Set Point: 4
lected twice per second n addition to these the oven accurately maintains the specified test digit green LEDs
temperature of ±1°F at 325°F (±0.5°C at163°C). Thermal Prevents overheating in the
new features, BBR3 users now also have the abil-
ity to upload their company logo directly into their The oven also features: double-wall construction; Protection event of control failure
test report. door with double-pane viewing window; symmetri- Temperature
cal top and bottom vents; air plenum, and squirrel- Ambient to 200°C (390°F)
Once the BBR3 has been connected to a network, Range
cage-type 1725 rpm fan
users have the ability to access their equipment Double exhaust vents for dis-
using a mobile phone, tablet, or PC. This also The RFTO is available in a standard model with a Vents sipation of expended volatile
allows users to connect to a wireless printer, mak- glass flow meter or with a digital flow meter. Both from specimen
ing it easy to print data and test results. A USB port models are identical other than the meter. Air Flow
Needle valve (long taper)
on the back of the unit is also available for users The oven includes a 200 to 14,000 ml/min flow Adjustment
who prefer to connect a printer directly. meter, moisture meter, 0 to 100 psi air pressure
Air Pressure
In addition to the USB port on the back of the gauge with regulator, rotating (15rpm) test rack Range 0 - 100 psi
Gauge
BBR3, a USB port on the front of the unit allows and eight glass specimen jars. Overall dimensions
40"W x 36"H x 26"D (1016 x 3292 x 660mm). A Heat Exchanger 5/16" dia. copper tube
for user friendly software updates. Operators can
also use this USB port to download data onto a clean, dry compressed air source is required for Rolling Thin Film Oven Accessories
flashdrive, or connect a wireless keyboard for more oven operation.
Lab stand with wheels H-30068.6
efficient data input. Rolling Thin Film Oven, 208-230V 60Hz H-30068.2F
Rolling Thin Film Oven, 208-230V 50Hz H-30068.5F Silica gel, 1.5 lb can H-30068.7
BBR3 Touch, 120V 60Hz H-1642T
BBR3 Touch, 230V 50Hz H-1642T.5F Dry air system H-30068.8
Shipping wt. 250 lbs (115kg) Digital RTFO, 208-230V 60Hz H-30069.2F
Digital RTFO, 208-230V 50Hz H-30069.5F Jar cooling rack H-30068.3
Shipping wt. 480 lbs (217.7kg)
Bottle scraper H-30068.2
BBR Accessories & Components
Description Model Digital mass flowmeter H-30068.9

Specimen Mold Set (5 per set) H-1642.1 ASTM 13C Thermometer H-2610.13C

Mylar Strips, 5 sets of 3 ea. H-1642.2 Additional specimen bottles H-30068.12

Oven Tongs H-30068.1
BBR Calibration Kit H-1642.3

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

256
Bitumen Testing ASPHALT

H-1637.3F

H-1631
H-30145E

Rotational Viscometer and Rheometer Loss-on-Heat Thin Film Oven Heavy-Duty Lab Bench Oven
ASTM D4402; AASHTO T316 ASTM D6, D1754; AASHTO T47, T179; BS2000 ASTM D6925
The Fungilab Master Series Expert L range rota- This dual-purpose 16ft3 oven can be used for loss- Forced draft oven capable of maintaining 437°F
tional viscometer and Thermosphere with a pre- of-heat test and thin film test for bitumen and (225°C), more than adequate for both short-term
cision-temperature controller provide an excellent asphaltic materials. The loss-on-heat oven deter- aging of asphalt samples and heating aggregates,
solution for those looking for SHRP asphalt binder mines the effect on asphaltic materials of heating asphalt binders and equipment for use in ASTM
testing equipment specifically designed to meet in an oven under prescribed conditions. The results D6925. The .7ft3 (198L) capacity provides ample
the requirements of AASHTO T316/ASTM D4402 are reported in terms of change in sample mass room for all applications. The oven features a cal-
high-temperature test methods. The H-1637 Mas- and/or changes in selected properties such as vis- ibrated dial-type temperature controller (model
ter Series Expert provides a measuring range of cosity, penetration and ductility as evidenced by H-30145) or a digital PID microprocessor tempera-
20-6,000,000 cP with 54 speeds in a range from test data taken before and after the oven cycle. ture controller (model H-30145E). These ovens are
0.01 to 200 rpm. A graphic display delivers clear The oven features a stainless steel interior, a pow- constructed of corrosion-resistant, aluminized steel
data readings and an intuitive full-touch keypad der-coated steel exterior and a double-glazed interiors and exteriors coated in an exclusive "high-
provides efficient data selection. A USB connec- door window for viewing the test chamber. Side- tech" bronze polyester finish. The large, high-im-
tion allows for data transfer to a PC Excel format. mounted controls are comprised of a microproces- pact thermal plastic door handles provide durabil-
The thermosphere features temperature control sor digital control and an independent overheat ity and remain cool-to-the-touch during operation.
to 300°C with an accuracy of 0.5°C for ambient to thermostat. Two rotating platforms are supplied to Ovens come with (2) heavy-duty, chrome-plated
80°C, <1.0°C for 80 to 150°C and <1.5°C for 150 perform both types of tests. wire shelves, which can support 80 lbs. (36kg).
to 300°C. Dimensions are: internal chamber: 26" (H) x
The oven's temperature range is: ambient to 365°F
Viscometer/Thermosphere includes: TL5 spindle, (180°C), pre-set to 163°C ± 1°C. Dimensions are: 20" (W) x 26" (D) (660 x 508 x 660mm); external
alignment bracket, thermocontainer with safety internal chamber: 15" (H) x 20.5" (W) x 18" (D) (38 dimension 33" (H) x 24" (W) x 32" (D) (838 x 610
guard and insulating cap, extracting tools and tem- x 52 x 46cm); external dimension 22.5" (H) x 34" x 813mm).
perature controller. (W) x 25" (D) (57 x 87 x 63cm). External Dimension Lab Bench Oven, 120V 60Hz H-30145
Rotational Viscometer, 100/240V 50/60Hz H-1637.3F does not include motor or handle. Lab Bench Oven, 120V 60Hz H-30145E
Shipping wt. 120 lbs (54.4kg) Lab Bench Oven, 230V 50/60Hz H-30145.4F
Loss-On-Heat Oven, 120V 60Hz H-1631
Lab Bench Oven, 230V 50/60Hz H-30145E.4F
Loss-On-Heat Oven, 220V 50Hz H-1631.5F
Viscometer/Rheometer Accessories and Parts Shipping wt. 206 lbs (93.4kg)
Shipping wt. 300 lbs (136kg)

Description Model Loss-On-Heat Oven Accessories

Thermosphere chambers, 100pk. H-1637.1 Heavy-Duty Lab Oven Accessories

Thermosphere chambers, 50pk. H-1637.2 Description Part #

Description Model Floor Stand, 1 fixed shelf H-30150
Spindle (TL5) H-1637.3
Spindle (TL6) H-1637.4 Sample container, ASTM D6 H-1631.1 Floor cabinet, 2 sliding shelves H-30155
Spindle (TL7) H-1637.5 Exhaust adapter for 3" pipe H-30181
Thin film oven pan, stainless
Silicone Std. Oil, RT 30,000 (600ml) H-1637.6 H-1540 Shelf w/ mounting rails H-30145S
steel for ASTM D1754
Silicone Std. Oil, RT 60,000 (600ml) H-1637.7
Silicone Std. Oil, RT 100,000 (600ml) H-1637.8
See page: 316-319 for more bench oven choices,
as well as accessories. See page 332 for gloves for
use with these ovens.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 257
ASPHALT Bitumen Testing

H-1304
AY1087X1

F85930-33
F85938

Asphalt Content/Binder Ignition Furnace Description Part # Rhoma-Sol™ Specialty Emulsifier

ASTM D6307 Spray-on solution used in the removal of asphalt
Exhaust tubing, 3"ID (sold by foot) H-1515
The asphalt content/binder furnace with internal and tack oil from tessting, paving, oiling, patch-
automatic balance is an environmentally-friendly Exhaust tubing, stainless, ing, reclaiming and other work zone equipment.
H-1515SS
and cost-effective method for the accurate deter- 3"ID (sold by foot) Contains no hazardous petroleum solvents and
mination of asphalt content. Developed by NCAT, Printer paper PRX2 is 100% biodegradable. Flammable, must ship
the National Center for Asphalt Technology. The Baskets (set of 2) AY1087X6 by truck domestically and as Dangerous Goods
furnace‘s large capacity handles samples up to Internationally.
4,000 grams. Ignition method reduces testing Accessory Package for Ignition Furnaces Rhoma-Sol™ Specialty Emulsifier H-1304
time compared to solvent testing methods and Shipping wt. 2 lbs (0.9kg)
Accessory package includes: 4 baskets, 2 trays,
automatic operation frees technicians for other 2 covers, handle, cooling cage, insulated plate,
tasks. Temperature range is: 392 to 1202°F (200 gloves, face shield, 4 rolls of printer tape, balance See page 332 for gloves.
to 650°C). 4,800 watt operation Accurate internal calibration plate and anderol oil.
balance monitors weights automatically through- Ignition Furnace Accessory Package AY1087X1
out ignition to within ±0.1 gram. Easy operation— Shipping wt. 75 lbs (34kg)
simply enter sample weight, calibration factor, load
the sample, and push start, when unit beeps at
test end, push stop, and sign receipt. Door safety
features, such as a software-activated door lock,
an automatic interlock that cuts power when door
is open, full 180 degree door opening and door
hinge lock eliminate harmful solvents and make
operation easy. Ignition Furnace comes complete
with accessory package AY1087X1. CE-approved.
Chamber dimensions: 14"W x 10.5"H x 14"D (355
x 266 x 355mm). Shipping dimensions: 32"W x
32"D x 60"H (813 x 813 x 1524mm).)
Content/Binder Ignition Furnace w/ Accessory
Package, 240V 50/60Hz, 20 amp F85930-33
Shipping wt. 383 lbs (173.7kg)

Content/Binder Ignition Furnace w/ Accessory

Package, 208V 60Hz, 23 amp F85938
Shipping wt. 280 lbs (127kg)

Content/Binder Ignition Furnace (furnace only),

240V 50/60Hz, 20 amp F85930-33X
Shipping wt. 357 lbs (161.9kg)

Content/Binder Ignition Furnace (furnace only),

208V 60Hz, 23 amp F85938X
Shipping wt. 230 lbs (104.3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

258
Ductility ASPHALT

H-1068CB

Interior of HA-1068 showing test molds,

screw drive and disengage lever.

HA-1068.3F

Elite Series Automated Ductilometer Stand-Alone Control -10°C to 80°C and the heating capacity is 1000W
ASTM D113, D5892, D6084, In stand-alone mode the controller provides you with a 0.1°C stability. Includes a 6' (183cm) cord,
The HA-1068 Ductilometer features Humboldt's with full, graphical monitoring of all testing func- feed-through switch and 3-prong plug and 3 stan-
Elite Series Controller. This touch-screen control- tions, while maintaining full computer control when dard H-1080 briquette molds with H-1090 plates.
ler provides you with full, graphical monitoring desired. The seven-inch, waterproof screen pro- Trough overall dimensions: 11.75" x 74" x 6.375"H
of all testing functions in a stand-alone applica- vides at-a-glance monitoring of testing functions, (30 x 188 x 16cm). Acrylic Cover is included with
tion, while also providing the ability to control the in a real-time graphical display, without the use of this machine.
machine from a networked computer or just port a computer, building upon Humboldt's dedication Elite Series Ductilometer, 120/220V 50/60Hz HA-1068.3F
Shipping wt. 425 lbs (193kg)
data from the controller to a networked computer. to modular, stand-alone data acquisition.
The HA-1068 Controller provides precise speed You will be able to run tests and display results Circulating Temperature Controller
control of the DC, stepper motor maintaining while viewing tabulation, basic x-y graphs and The H-1068CB Circulating Temperature Control-
constant speed, entirely vibration-free, from 5 to instrument readings in real-time during the test, ler is designed for use with the H-1068X ductility
100mm/min. The unit provides for three test bri- using user-defined, basic data acquisition. Test machine. It provides a solid-state, thermostatically
quettes per testing sequence with a maximum data is stored in the device and can be down- controlled bath and circulator to maintain water
carriage travel (elongation) of 150cm and an auto- loaded to a USB drive via the machine's FRONT temperature within a ± 0.9°F (± 0.5°C). Tem-
matic stop feature. The machine also provides a USB port or the data can be transferred to a com- perature range is: -10°C to 80°C. 1000W heating
manual disengage lever for quickly disengaging puter via the LAN port. capacity with 0.1°C stability. Dimensions: 25" x 9"
the screw drive to return the testing carriage back x 19" (635 x 229 x 483mm).
A second USB port located on the back of the
to the start position after a test completion. This Circulating Temp. Control, 120V 60Hz H-1068CB
machine can also be used to power a wireless
feature allows multiple tests to be run without hav- Circulating Temp. Control, 220V 60Hz H-1068CB.2F
access point, which can provide a wireless hook-up
Circulating Temp. Control, 220V 50Hz H-1068CB.5F
ing to wait for the machine to reset itself. with a computer, if no LAN is available. Shipping wt. 80 lbs (36.2kg)
The HA-1068 has a stainless steel interior with an The HA-1068 Ductilometer is sold without a circu-
overflow connection, and a baked enamel stainless lating temperature controller. If desired, choose
steel-wrapped exterior. Gears are bronze or brass; a circulating temperature controller with the cor-
all other parts are solid brass to prevent rusting. rect AC requirements. The temperature-controller
Finned stainless steel tubes beneath a false bottom provides a solid-state, thermostatically controlled
provide efficient thermal transfer. A single stainless bath and circulator to maintain water temperature
steel lead screw mounted above water level pre- within a ±0.9°F (±0.5°C). The temperature range is:
vents agitation of water and premature rupture
of specimens. A traveling pointer adjusts to zero
starting position and indicates exact position of
carriage on a linear centimeter scale attached to
trough‘s front edge.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 259
ASPHALT Ductility

Interior of HA-1060 showing test molds,

screw drive and disengage lever.

Interior of HA-1060 showing force determina- H-1060.4F

tion transducer set up.

Elite Series Ductilometer, Refrigerated a manual disengage lever for quickly disengaging USB port or the data can be transferred to a com-
ASTM D113, D5892, D6084, AASHTO T51 the screw drive to return the testing carriage back puter via the LAN port. A second USB port located
Humboldt's Elite Series refrigerated Ductilometer to the start position after a test completion. This on the back of the machine can also be used to
features Humboldt's Elite Series Controller. This feature allows multiple tests to be run without hav- power a wireless access point, which can provide
touch-screen controller provides you with full, ing to wait for the machine to reset itself. a wireless hook-up with a computer, if no LAN is
graphical monitoring of all testing functions in a The HA-1060 has a stainless steel interior with an available.
stand-alone application. overflow connection, and a baked enamel stainless
The HA-1060 Refrigerated Ductilometer is steel-wrapped exterior. Gears are bronze or brass; Includes 3 standard H-1080 briquette molds with
mounted into a polypropylene bath designed for all other parts are solid brass to prevent rusting. H-1090 plates and an integral, clear acrylic cover to
use with sodium chloride solutions. The cabinet is Finned stainless steel tubes beneath a false bottom aid in temperature control. Cabinet is 90" x 41" x
constructed of a heavy-gauge, enamel-finish steel provide efficient thermal transfer. A single stainless 23" (229 x 104 x 58cm).
lower cabinet and stainless steel upper cabinet. steel lead screw mounted above water level pre- Elite Ductilometer, Refrig., 220V 50/60Hz HA-1060.4F
It is fully-insulated and the sealed space between vents agitation of water and premature rupture Shipping wt. 1066 lbs (484kg)
the inner and outer walls protects the low-thermal of specimens. A traveling pointer adjusts to zero
conductivity properties of the foam and fiberglass starting position and indicates exact position of
combination (tested and proven to have the best K carriage on a linear centimeter scale attached to
factor). A high-capacity pump assures positive cir- trough‘s front edge.
culation in the bath to provide close temperature Stand-Alone Control
control. Three-direction flow regulation is handled In stand-alone mode the controller provides you
with flow cut-off valves that engage when equi- with full, graphical monitoring of all testing func-
librium is reached. A sensitive, magnetic-setting, tions, while maintaining full computer control when
electronic relay control panel for heat and refriger- desired. The seven-inch, waterproof screen pro-
ation maintains temperature range of 32°F (0°C) to vides at-a-glance monitoring of testing functions,
86°F (30°C) by 0.1°F (0.1°C). in a real-time graphical display, without the use of
The HA-1060 Controller provides precise speed a computer, building upon Humboldt's dedication
control of the DC, direct-drive motor maintain- to modular, stand-alone data acquisition.
ing constant speed, entirely vibration-free. from You will be able to run tests and display results
5 to 100mm/min. The unit provides for three test while viewing tabulation, basic x-y graphs and
briquettes per testing sequence with a maximum instrument readings in real-time during the test,
carriage travel (elongation) of 150cm and an auto- using user-defined, basic data acquisition. Test
matic stop feature. The machine also provides data is stored in the device and can be down-
loaded to a USB drive via the machine's FRONT

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

260
Ductility ASPHALT

H-1068CB

H-1068X H-1068B H-1050

Humboldt Ductilometer Ductilometer, Temperature-Controlled Ductility Machine, Basic

ASTM D113, D5892, D6084, AASHTO T51 ASTM D113, D5892, D6084, AASHTO T51 ASTM D113, D5892, D6084, AASHTO T51
Humboldt Ductilometers determine ductility of The H-1068 Ductilometer builds on the H-1068X The H-1050 is a three-speed machine designed for
formed asphalt/cement or semi-solid bitumen machine and adds a circulating temperature-con- standard and force ductility tests. It includes a qual-
by measuring the distance of elongation before trol unit. Solid-state thermostatically controlled ity mechanical gear box. Speeds of 1/4, 1 or 5cm
reaching the breaking point of a briquette sample, bath and circullator maintain water temperature per minute are selected via lever shift on mechan-
which is pulled apart at a specific speed and tem- within a ± 0.18°F (± 0.1°C). The H-1068B is a three- ical gear box. The unit is a bare-bones, econom-
perature. The H-1068X is a three-speed machine speed machine designed for Standard and Force ical ductility machine, which does NOT include a
designed for standard and force ductility tests. The Ductility tests. The unit tests three briquettes simul- wrapped exterior or thermal-finned, stainless steel
unit tests three briquettes simultaneously and its taneously and its DC, direct-drive motor maintains tubes for enhanced thermal transfer.
DC, direct-drive motor maintains constant speed, constant speed, entirely vibration-free. Speeds of Ductility Machine, Basic ,120V 60Hz H-1050
entirely vibration-free. Speeds of 1/4, 1 or 5cm per 1/4, 1 or 5cm per minute are selected via lever shift Ductility Machine, Basic, 220V 60Hz H-1050.2F
minute are selected via lever shift on mechanical on mechanical gear box. Ductility Machine, Basic, 220V 50Hz H-1050.5F
Shipping wt. 200 lbs (90.7kg)
gear box. A single stainless steel lead screw mounted above
A single stainless steel lead screw mounted above water level prevents agitation of water and pre- Circulating Temperature Controller
water level prevents agitation of water and pre- mature rupture of specimens. A traveling pointer The H-1068CB Circulating Temperature Control-
mature rupture of specimens. A traveling pointer adjusts to zero starting position and indicates ler is designed for use with the H-1068X ductility
adjusts to zero starting position and indicates exact position of carriage on a linear centimeter machine. It provides a solid-state, thermostatically
exact position of carriage on a linear centimeter scale attached to trough‘s front edge. Maximum controlled bath and circulator to maintain water
scale attached to trough‘s front edge. Maximum carriage travel (elongation) is 150cm with an auto- temperature within a ± 0.9°F (± 0.5°C). Tem-
carriage travel (elongation) is 150cm with an auto- matic stop. perature range is: -10°C to 80°C. 1000W heating
matic stop. capacity with 0.1°C stability. Dimensions: 25" x 9"
The Unit has a stainless steel interior with an over-
x 19" (635 x 229 x 483mm).
The Unit has a stainless steel interior with an over- flow connection, and a baked-enamel, stainless
Circulating Temp.Control, 120V 60Hz H-1068CB
flow connection, and a baked enamel stainless steel-wrapped exterior. Gears are bronze or brass;
Circulating Temp.Control, 220V 60Hz H-1068CB.2F
steel-wrapped exterior. Gears are bronze or brass; all other parts are solid brass to prevent rusting.
Circulating Temp.Control, 220V 50Hz H-1068CB.5F
all other parts are solid brass to prevent rusting. Finned stainless steel tubes beneath a false bot- Shipping wt. 80 lbs (36.2kg)
Finned stainless steel tubes beneath a false bot- tom provide efficient thermal transfer. Includes a
tom provide efficient thermal transfer. Includes a 6' (183cm) cord, feed-through switch and 3-prong
6' (183cm) cord, feed-through switch and 3-prong plug. Includes 3 standard H-1080 briquette
plug. Includes 3 standard H-1080 briquette molds with H-1090 plates. Trough overall dimen-
molds with H-1090 plates. Trough overall dimen- sions: 11.75" x 74" x 6.375"H (30 x 188 x 16cm).
sions: 11.75" x 74" x 6.375"H (30 x 188 x 16cm). H-1068PC Acrylic Cover is recommended to main-
H-1068PC Acrylic Cover is recommended to main- tain constant tank temperatures.
tain constant tank temperatures. Ductilometer, Temperature Controlled
Humboldt Ductilometer Ductilometer, 120V 60Hz H-1068B
Humboldt Ductilometer, 120V 60Hz H-1068X Ductilometer, 220V 60Hz H-1068B.2F
Humboldt Ductilometer, 220V 60Hz H-1068X.2F Ductilometer, 220V 50Hz H-1068B.5F
Humboldt Ductilometer, 220V 50Hz H-1068X.5F Shipping wt. 410 lbs (185.9kg)
Shipping wt. 240 lbs (108.8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 261
ASPHALT Ductility

H-1090
H-1090.3
H-1080 H-1030

H-1068.100

HA-1061
HA-1063

H-1068PC HA-1062

Ductility Briquette Mold Base Plate, Triple Mold Calibration Device, Force Transducers
ASTM D113 Brass base plate for triple mold. Flat surface pro- Calibration device for Humboldt Elite Series Duti-
Mold for making test briquettes for use with any vides uniform contact with bottom surfaces mold. lometer force determination transducers. Provides
ductility testing machine. H-1080 briquette mold 5.5" x 8" x .125" (140 x 203 x 3mm) simple and precise calibration of transducers.
has angled sides for use in standard test. Four Base Plate, Triple Mold H-1090.3 Includes calibration pedestal, storage pedestal,
Shipping wt. 1.8 lbs (0.8kg) dead weight hanger and weight set.
accurately machined interlocking brass segments
are interchangeable with same parts from different Cover for Ductilometers (Clear, Acrylic) Calibration Device, Force Transducers HA-1062
Temperature control cover made from clear acrylic Shipping wt. 15 lbs (6.8kg)
molds; no parts identification marks are needed
for matching. End pieces, designed to hold spec- sheet. Can be used with all ductility machines, Force Determination Kit for Ductilometers
imens being elongated, are provided with mount- except HA-1060, which comes with one. This force determination kit is designed for
Ductility Machine Cover H-1068PC use with manual control ductilometers like the
ing holes.
Shipping wt. 40 lbs (18kg) H-1068X and H-1068B. It provides (3) Force Deter-
Ductility Briquette Mold H-1080 mination Transducers, a HM-5320 Data Logger
Shipping wt. 0.8 lb (0.36kg) Ductilometer Stand
and (1) Force Transducer Calibration Device. This
Elastic Recovery Mold Designed for use with Humboldt Ductilometers,
kit will allow you to do force determinations and
ASTM D5892, D6084, AASHTO T301 places machine at working height and includes a the Data Logger will allow you to monitor the test
shelf for circulating temperature controller. Fea- and its results. Humboldt's Elite Series Data Log-
Mold for making test briquettes for use with any
tures square steel legs. Needs assembly. ger provides four individual, 24-bit analog to dig-
ductility testing machine. H-1030 briquette mold
has straight sides for use in forced tests. Requires Ductilometer Stand H-1068.100 ital converters with an instrumentation excitation
Shipping wt. 200 lbs (90.7kg) supply of 10 VDC. The analog Logger is ideal for
H-1090 or H-1090.3 base plates. Four accurately
Force Determination Transducers use with instruments, such as pressure transducers,
machined interlocking brass segments are inter-
Force determination transducers for use with load cells, and strain transducers. It provides data
changeable with same parts from different molds; storage for 1000 readings per channel. See page
Humboldt Elite Series Ductilometers. Provides
no parts identification marks are needed for match- 133 for more information.
precise tensile strength measurement of any mate-
ing. End pieces, designed to hold specimens being Force Determination Kit HA-1063
rial, preparation, procedure or type of test to an
elongated, are provided with mounting holes. accuracy of 0.01 lbs. Attaches over existing pin in Shipping wt. 30 lbs (13.6kg)
Elastic Recovery Mold H-1030 dutilometer without tools or machine modification.
Shipping wt. 1.1 lb (0.49kg)
Can accommodate three adapters simultaneously.
Base Plate Electric components are located out of the water
Brass, base plate for single mold. Flat surface pro- bath. Sold individually, Elite Series Ductilometer
vides uniform contact with mold and surfaces. 5.5" can accommodate up to 3 at a time.
x 2" x .125" (140 x 51 x 3mm) Force Determination Transducer HA-1061
Shipping wt. 4 lbs (2.3kg)
Base Plate, Single Mold H-1090
Shipping wt. 0.6 lbs (0.27kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

262
Penetrometers ASPHALT

H-1240D

H-1240
H-1200

H-1250 H-1252

Penetrometer, Universal to automatically start a test with a button push and Water Bath
ASTM D5, D217, D1168, D1321, D1403, D1831, have the test end after a preset duration. ASTM D6927, D5581 and D4867
D5329; AASHTO T49, T187 and others Penetrometer, Digital, 120V 60Hz H-1240D Microprocessor-based control for precise tempera-
Direct-reading instrument for precision penetration Penetrometer, Digital, 220V 50/60Hz H-1240D.4F tures throughout the range. Includes a stainless
Shipping wt. 26.2 lbs (11.8kg)
measurements of bituminous materials, cement, steel shelf, which stands 2" (51mm) above the bot-
petrolatum and waxes, as well as food, cosmetics Penetrometer for Battery Paste tom of the unit for free circulation of water above
and pharmaceutical products. Unit has 5" diam- Battery Paste Penetrometer combines the H-1200 and below test samples. Volume is 7.76 gallons
eter indicator dial, graduated in 400 divisions of and a H-1255 grease cone, which has a hardened (29.40L) and dimensions are: ID: 19.5" W x 11.5" D
0.1mm, corresponding to 40mm penetration. Zero steel tip with a special plunger. Total needle weight x 8" H (495.3 x 292.1 x 203.2mm).
preset to eliminate errors. Includes 47.5g plunger is 60g ±.050g. Deluxe Water Bath, 120V 60Hz H-1392
with 3.2mm hole, and two loading weights (50g Penetrometer for Battery Paste H-1202 Deluxe Water Bath, 220V 50/60Hz H-1392.4F
Shipping wt. 25 lbs (11kg)
and 100g). Overall dim. 10.5" x 13" x 22" (266.7 x Ship wt. 43lbs. (19.5kg)
330.2 x 558.8mm). Penetrometer, Portable Economy Water Bath
Penetrometer, Universal H-1200 ASTM D5, D217, D1168, D1191, D1321, D1403, Low-cost alternative water bath for heating spec-
Shipping wt. 25 lbs (11kg) D1831, D1855; AASHTO T49, T187 and others imens holds eight standard 4" stability molds.
Penetrometer, Electric Lighter and smaller than H-1200 for field work, Supporting shelf above the bottom allows water
ASTM D5, D217, D1168, D1191, D1321, D1403, unit’s micrometer adjusts for accurate settings, as circulation around specimens. Automatic thermo-
D1831, D1855; AASHTO T49, T187 and others well as coarse adjustment for approximate set- static control with a range of 150° to 500°F (65°
Takes our H-1200 universal penetrometer and tings. Only one additional 50g loading weight is to 160°C). ID 11.5" x 19.5" x 5.5" (293 x 497 x
adds an automatic digital timer to it. The timer's included with a H-1280 needle. Overall dim. 7" x 140mm) deep. H-1380.4F uses a step-down trans-
release mechanism is switchable between seconds 7" x 16" (178 x 178 x 406mm). former, which is included, for electric conversion.
minutes, or hours. Timer may be set in 1/10th sec- Penetrometer, Portable H-1250 Deluxe Water Bath, 120V 60Hz H-1380
Shipping wt. 14 lbs (6.3kg)
ond intervals. Plunger releases with push of a but- Deluxe Water Bath, 220V 50/60Hz H-1380.4F
ton, and automatically stops after the preset time Penetrometer for Battery Paste, Portable Ship wt. 18lbs. (18.16kg)
duration. H-1240.4F adds a voltage adapter and Battery Paste Penetrometer combines the H-1250 Transfer Dish
internal switch on the timing mechanism to change and a H-1255 grease cone, which has a hardened ASTM D5
cycle to 50Hz steel tip with a special plunger. Total needle weight
Plastic transfer dish has flat bottom, straight sides
Penetrometer, Electric, 120V 60Hz H-1240 is 60g ±.050g.
and metal centering lugs with magnet in the bot-
Penetrometer, Electric, 220V 50/60Hz H-1240.4F Penetrometer for Battery Paste, Portable H-1252
Shipping wt. 9 lbs (4.08kg)
tom. Size is: 3.75" dia. x 3.25" deep (95 x 83mm).
Shipping wt. 32 lbs (15kg)
Transfer Dish H-1352
Penetrometer, Digital Deluxe Water Bath Shipping wt. 0.9 lb (0.4kg)
ASTM D5, D217, D1168, D1191, D1321, D1403, ASTM D6927, D5581 and D4867
D1831, D1855; AASHTO T49, T187 and others Microprocessor-based control for precise tem-
The H-1240D penetrometer adds a digital gauge peratures throughout the range to 180°F. Includes
to the H-1240 electric penetrometer to provide magnetic circulator, ensuring constant water tem-
precise at-a-glance readings, as well as the ability perature, and, a stainless steel shelf, which stands
2" (51mm) above the bottom of the unit for free
circulation of water above and below test samples
aided by magnetic stir bar, included. Volume is
7.76 gallons (29.40L) and dimensions are: ID: 19.5"
W x 11.5" D x 8" H (495.3 x 292.1 x 203.2mm)
Deluxe Water Bath, 120V 60Hz H-1390
Deluxe Water Bath, 220V 50/60Hz H-1390.4F H-1392
Ship wt. 44lbs. (19.9kg) H-1352

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 263
ASPHALT Penetrometers
H-1280 H-1255

H-1300
H-2519
H-1302 H-1270

H-1310
H-1320
H-1317
Penetration Needles and Cones H-2520 H-2522 H-2524 H-2529

Standard hardened stainless steel needle, Measuring

40-45mm exposed needle length. Wt. H-1280 firmness of solid
20° aluminum cone, 3.2mm ferrule,0.8mm
2.5g. and plasticized
stainless steel blunt tip. Overall length H-1270
Bituminous fats: shorten-
Standard hardened stainless steel needle, 106mm. Wt. 45g.
materials ings, butters
40-45mm exposed needle length. Certified
ASTM D5; AAS- H-1300 AOCS Cc 16-60
to ASTM accuracy by independent labora-
HTO T49, IP49; tory. Wt. 2.5g. Recovery of
ASA Std. A37.1; 1/4 scale. (Not considered a substitute for
used grease,
Fed Spec. SS.R. Long hardened stainless steel needle, 50- full-size cone specified in ASTM D217.) Wt. H-2519
H-1290 small samples
406C, Meth. 55mm exposed needle length. Wt. 2.5g. 9.38g
ASTM D1403
214.01 Long hardened stainless steel needle, 50-
Hollow 90° brass cone, highly polished
55mm exposed needle length. Certified to Grease testing
H-1302 stainless steel tip. Removable nut and H-2520
ASTM accuracy by independent laboratory. penetrometers stem. Wt. 102.5g.
Wt. 2.5g. ASTM D217,
D937 ASA Std. Hollow 90° stainless steel cone, highly
Hardened stainless steel wax penetration
Z11.3 polished stainless tip. Removable nut and H-2522
Waxes with 250 needles with tapered point, blunt tip of
H-1310 stem. Wt. 102.5g.
or less pene- truncated cone. Ferrule is approx. 3.2mm
tration ASTM dia. Wt. 2.5g. Hollow 90° Magnesium cone and plunger.
ASTM D2884 H-2524
D1321 Total cone wt. 30.0g
Same as H-1310. Certified to ASTM accu-
H-1317
racy Food, Paste,
Hollow 90° Aluminum cone and tip. Total
Paints U.S. Dept H-2529
Hardened stainless steel tip with special wt. 35g
Battery paste H-1255 of Agriculture
plunger. Total wt. 60g ± .050g.
Applications
Joint sealant for
requiring 90·
asphalt & con- Resilience ball penetration tool. Total wt. Stainless steel replacement tip, nut and
H-1320 cones, ASTM H-2525
crete pavements 27.5g. stem.
D217, D937
ASTM D5329
ASA std. Z11.3
Moisture Boxes, Aluminum
Aluminum Moisture Boxes
Volume
OD ID Height Inside Ht. Model Flat-bottom, straight-side seamless aluminum box
cu. in./fl. oz.
has tight fitting cover, which fits bottom of box as
2.650 (44cc)
2" (51mm) 1.975 (50mm) .875" (22mm) 0.865" (22mm) H-4926 well. Protects sample from exposure during stor-
1.47 (44ml)
age and weighing operations.
8.366 (137cc) Aluminum Moisture Boxes See chart at left
2.5" (64mm) 2.470 (63mm) 1.75" (44mm) 1.746" (44mm) H-4927
4.64 (137ml)
6.963 (114cc) Sample Cups, Tin
3" (76mm) 3.000 (76mm) 1" (25mm) 0.985" (25mm) H-4928
3.86 (114ml) Flat-bottom, seamless tin sample cups have tele-
19.037 (312cc) scoping covers. Hold samples for determining
3.5" (89mm) 3.490 (89mm) 2" (51mm) 1.990" (51mm) H-4929
10.55 (312ml) penetrations.
Sample Cups, Tin See chart at left
Sample Cups, Tin
Capacity Dimensions Quantity Model
2.5 oz (71g) 1.87" (47.5mm) ID, 1.42" (36mm) deep 48 H-1350.3A
3 oz (85g) 2.25" (57.1mm) ID, 1.42" (36mm) deep 36 H-1350.3
4.7 oz (133g) 2.42" (61.5mm) ID, 1.67" (42.6mm) deep 36 H-1350.4A
5.6 oz (159g) 2.59" (66mm) ID, 1.72" (43.4mm) deep 36 H-1350.6A
8.2 oz (232g) 3.05" (77.5mm) ID, 1.97" (50mm) deep 18 H-1350.8A
16 oz (454g) 4" (102mm) ID, 2.375" (60.3mm) deep 1 H-1350.16
H-4929 H-1350.70
42.3 oz (1200g) 6.12" (155mm) ID, 3" (76.2mm) deep 1 H-1350.42
70.5 oz (2000g) 6.12" (155mm) ID, 5" (127mm) deep 1 H-1350.70

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

264
Viscosity ASPHALT

H-1745
H-1735

H-1733

H-1720 H-1730 H-1722

Constant Temperature Bath, 100°C Constant Temperature Bath, 150°C Temperature Bath Storage Pedestal
ASTM D445 ASTM D445 This Heavy-duty, two-drawer unit provides a ped-
Specifically designed for precise viscosity determi- The H-1730 constant temperature bath maintains estal for constant temperature baths, as well as
nation with glass capillary viscometers, the H-1720 the accurate control required by ASTM D445 for storage of accessories and consumables. It pro-
baths offer superior temperature control to 100°C. kinematic viscosity measurements with glass cap- vides elevated viewing of the bath and ample
The H-1720 offers a 12"Dia x 12"H (305mm x illary viscometers. The H-1730 baths offer supe- room for storage of viscometers and other acces-
305mm). bath jar that can accommodate most rior temperature control to 150°C. Within the sories. Dimensions: 18" W x 18" D x 6.5" H (457 x
viscometers. range of 20 to 100°C, temperature is controlled to 457 x 165mm)
These baths maintain accurate temperature con- 0.01°C; above 100°C temperature it is controlled Temperature Bath Storage Pedestal H-1722
trol of ± 0.01°C within the range of 20°C to 100°C to 0.03°C. Shipping wt. 40 lbs (18.1kg)

(±0.01°C), providing the temperature sensitivity The H-1730 bath chamber is a cylindrical clear Vacuum Manifold
required by ASTM D445 for kinematic viscosity glass vessel 12"dia x 12"H (305mm x 305mm). A Vacuum manifold with manual valves for applying
measurements with glass capillary viscometers. stainless steel baffle is located in the center of the vacuum or pressure to capillary-type viscometers.
Two electric heating elements inside the bath rap- bath to provide a good background for viewing Designed for use with the H-1720 and H-1730 con-
idly heat the medium to any desired temperature viscometers. Two fluorescent lamps illuminate the stant temperature baths. Integral brackets permit
within the range. interior of the bath brightly and uniformly, without mounting on bath covers. Two models are avail-
The H-1720 bath chamber is a cylindrical clear glare. Two heating elements inside the bath rap- able: one for the H-1730, which has four valves and
glass vessel 12" d ia x 12"H (305mm x 305mm). idly heat the bath medium to any temperature one for the H-1720, which has three valves. Both
A stainless steel baffle located in the center of within the bath range. The top cover contains Include a 10-foot length of rubber vacuum tubing,
the bath provides a plain reflective background seven round holes 2" (51mm) in diameter. Up to .25" bore x .625 OD, for connection to vacuum/
to aid in viewing instruments. The top cover con- seven glass capillary viscometers (in holders) can pressure regulators. Housing is epoxy-coated alu-
tains seven round holes 2" (51mm) in diameter be placed in the bath. Other hole configurations minum, overall 13"W x 2.75"D x 9"H (330 x 70 x
for insertion of viscometer holders, allowing up to can be supplied on special order. 229mm)
seven viscosity measurements to be made simulta- A solid-state control circuit, equipped with a Vacuum Manifold for H-1720 H-1745
neously. Covers are supplied for capping unused stainless steel-encased thermistor provides pro- Vacuum Manifold for H-1730 H-1735
holes. Two additional holes 10mm in diameter, are portional control of temperature. A motor-driven Shipping wt. 6 lbs (2.7kg)

provided for thermometers. All wetted parts of the stirrer ensures a uniform temperature throughout IBF Bath Oil
Constant Temperature Bath are made of stainless the bath. Oil for constant temperature baths operating at
steel or glass. The frame is fabricated from heavy All wetted parts of the bath are made of stainless less than 135°C (275°F). 6-gallon container (2.3L)
aluminum and coated with a corrosion-resistant steel or glass. The bath housing is fabricated from UBF Bath Oil H-1732
epoxy finish. Viscometers, holders, bath oil, and heavy aluminum and coated with a corrosion-resis- Shipping wt. 50 lbs (22.6kg)
thermometers must be purchased separately. tant epoxy finish. Viscometers, holders, bath oil, Bath Fluid, High-Temperature Silicone
Dimensions: 16"w x 14.25"d x 24"h (407 x 362 x and thermometers must be purchased separately. This clear, colorless, oily liquid has a nominal vis-
610mm). Dimensions: 17.25"w x 18.25"d x 23"h (438 x 464 cosity of 50 centistokes at 25°C, with a viscosity/
Constant Temp. Bath, 120V 60Hz H-1720 x 584mm). temperature coefficient of 0.59. The boiling point
Constant Temp. Bath, 220V 50/60Hz H-1720.4F Constant Temp. Bath, 120V 60Hz H-1730 is over 360°C with a flash point above 535°F. Fluid
Shipping wt. 80 lbs (36.2kg)
Constant Temp. Bath, 220V 50/60Hz H-1730.4F has a maximum volatility, with 0.5% weight loss
Shipping wt. 123 lbs (56kg) over 24 hours at 150°C.
Bath Fluid, Silicone, .5 Gallon H-1733
Shipping wt. 20 lbs (9.07kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 265
ASPHALT Viscosity

H-1741H H-1741V H-1746.7 H-1747.1

Digital Vacuum Pressure Regulators Zeitfuchs® Cross-Arm Viscometer and Holder Zeitfuchs® Cross-Arm Viscometer and Holder
ASTM D2171 ASTM D445, D446, D2170; AASHTO T201; ISO 3105 Approx. Range of
These digital vacuum regulators (DVR) are These models are used to determine kinematic Size Constant Model
designed for precise measurement and control Cs/Sec. Centistokes
viscosity of liquid asphalts, road oils and distilla-
of vacuum at 300 mm Hg below atmospheric tion residues of liquid asphalts at 140°F (60°C) and 1 0.003 0.6 to 3 H-1746.1
pressure. Unlike other vacuum regulators, the sol-
of asphalt cements at 275°F (135°C), requiring a 2 0.01 2 to 10 H-1746.2
id-state H-1741H and H-1741V Regulators use no
charge of only 1 to 3ml. They are easily filled and
mercury. Both units are identical except that one is 3 0.03 6 to 30 H-1746.3
a horizontal configuration and the other is vertical. cleaned while immersed in a temperature bath and
need not be removed. The viscometers require a 4 0.1 20 to 100 H-1746.4
DVR meters display the amount of vacuum in mm/
Hg or one of nine other units of measurement liquid depth of 9" (229mm). Includes round metal 5 0.3 60 to 300 H-1746.5
selected using a keypad on the meter. holder for 2" (51mm) dia. hole and certificate of
6 1.0 200 to 1,000 H-1746.6
In asphalt laboratories the digital vacuum regu- calibration.
Zeitfuchs® Cross-Arm Viscometer see chart to right 7 3.0 600 to 3,000 H-1746.7
lator (DVR) may be used in conjunction with Can-
non-Manning, Asphalt Institute, and Modified Shipping wt. 2 lbs (.9kg) 8 10 2,000 to 10,000 H-1746.8
Koppers vacuum viscometers for measurement of Asphalt Institute Vacuum Viscometer 9 30 6,000 to 30,000 H-1746.9
highly viscous materials such as asphalt cement at
ASTM D2170, D2171 20,000 to
60°C (140°F) according to ASTM D 2171. The DVR 10 100 H-1746.10
is also useful in other laboratory systems where Designed for measurement of highly-viscous mate- 100,000
accurate measurement and control of vacuum is rials, such as asphalt cement at 60°C (140°F), vis-
required. cometer contains a graduated capillary instead of
Both the H-1741H and H-1741V are equipped with timing bulbs. Applicable to materials with a viscos-
an internal vacuum pump and do not require an ity range of 0.036 to 80,000 poise. They require a
external vacuum source. minimum sample volume of only 3ml and require a
The internal set points for the instrument gauge liquid bath depth of 180 mm (7.1 inches). Includes
are preset to regulate vacuum at 300 ± 0.5 mm Hg permanently-attached, round metal holder for 2"
below atmospheric pressure (the vacuum required (51mm) dia. hole and certificate of calibration.
by ASTM D 2171). These set points may be altered
Asphalt Inst. Vacuum Viscometer see chart below
to fit the user’s specific needs within the DVR’s
Shipping wt. 2 lbs (.9kg)
operating range of 28 to 410 mm Hg below atmo-
spheric pressure. Asphalt Institute Vacuum Viscometers
Reading accuracy: ±0.5mm HG. Operating tem- Approx. Constant
perature: 0 to 40°C (32 to 104°F). Upper/lower Viscometer Viscosity Range poise/second
Model
safety limit: 746mm HG below atmospheric pres- Size/No. (Poise) at 300mm Hg
sure. Choice of horizontal: 18.5"w x 18"d x 6.75"h Vacuum
(470 x 457 x 171mm) or vertical: 6.75"w x 18"d x at B at C at D
18.5"h (171 x 457 x 470mm).
25 42 to 800 2 1 0.7 H-1747.1
Digital, Vacuum Pressure Regulator
Regulator, Horizontal,120V 60Hz H-1741H 50 180 to 3,200 8 4 3 H-1747.2
Regulator, Horizontal, 220V 50/60Hz H-1741H.4F 100 600 to 12,800 32 16 10 H-1747.3
Regulator, Vertical,120V 60Hz H-1741V
Regulator, Vertical, 220V 50/60Hz H-1741V.4F 200 2,400 to 52,000 128 64 40 H-1747.4
Shipping wt. 30 lbs (13.6kg) 400R 9,600 to 140,000 500 250 160 H-1747.5
800R 38,000 to 5,800,000 2000 1000 640 H-1747.6

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

266
Viscosity ASPHALT

H-2166A shown with

(4) Automatic Timers,
which need to be ordered
H-2165 in addition to the H-2166A
H-2166A
bath, see below.

Saybolt Viscosity Bath Saybolt Viscosity Bath, For Automatic Timers Automatic Timers for Saybolt Viscosity Bath
ASTM D88, D244, E102; AASHTO T72 ASTM D88, D244, E102; AASHTO T72 ASTM D88, D244, E102; AASHTO T72
Designed for Saybolt universal and furol viscos- Constant temperature viscosity bath designed for At the push of a button, the automatic timer starts
ity testing, this constant temperature bath meets use with one to four Automatic Saybolt Viscos- the sample flow, senses the 60mL end point and
all ASTM and AASHTO requirements for precise ity Timing Sensors. Bath is sold with no timers, digitally records and displays the efflux time in
temperature control. The micro-processor PID cir- order auto timers separately. Features simple 0.1 seconds resolution with an accuracy of 0.05%.
cuitry assures accurate temperature control within push-button controls and dual digital displays are Automatic timing improves testing accuracy
ASTM tolerances throughout the range of ambient used for easy setting and monitoring of the baths and convenience, eliminating the chain and cork
to 464°F (240°C). Temperature stability is ±0.05°F temperature. assembly and the need to manually time each sam-
(±0.03°C) With a capacity of four viscometers and 60ml ple. One to four automatic timers can be fitted to
Simple push-button controls and dual digital dis- receiving flasks, the bath features sliding draft the H-2166A Saybolt viscosity bath.
plays are used for easy setting and monitoring shields, chemical-resistant alignment plates for Saybolt Viscosity Timing Sensor, 120V 60Hz H-2167
of the baths temperature. With a capacity of four handling of flasks and a glare-free fluorescent Saybolt Viscosity Timing Sensor, 220-240V 50/60Hz H-2167.4F
viscometers and 60ml receiving flasks, the bath backlight for easy viewing of test sample. The insu- Shipping wt. 5 lbs (2.2kg)

features sliding draft shields, chemical-resistant lated bath interior is constructed entirely of heavy-
alignment plates for handling of flasks and a glare- gage stainless steel and the built-in overflow pipe
free fluorescent backlight for easy viewing of test and drain valve simplifies filling the bath oil to the
sample. The insulated bath interior is constructed required level. A chemical resistant top plate pro-
entirely of heavy-gage stainless steel and the vides insulation and is easily removed to allow for
built-in overflow pipe and drain valve simplifies fill- cleaning of the bath interior. A cooling coil for tap
ing the bath oil to the required level. A chemical water or refrigerated coolant is provided for oper-
resistant top plate provides insulation and is easily ation at near-ambient temperatures. Steel cabinet
removed to allow for cleaning of the bath interior. has leveling feet and a chemical-resistant polyure-
The bath is supplied complete with four thermom- thane-epoxy finish.
eter supports, four port covers, four chained corks, Temperature range is ambient to 464°F (240°C)
two port closures, tube nut wrench, orifice wrench, and temperature stability is ±0.05°F (±0.03°C).
withdrawal tube and oil strainer. Viscometer tubes, Bath capacity is 5 gallons (19L) and recommended
orifices, receiving flasks, oil and thermometers are bath medium is water or suitable heat transfer
not included and must be ordered separately. fluid. Included accessories: Cleaning plunger;
Saybolt Bath, 120V 60Hz H-2165 chained corks; oil strainer; withdrawal tube; tube
Saybolt Bath, 220-240V 50/60Hz H-2165.4F nut wrench; orifice wrench; port closures; port cov-
Shipping wt. 100 lbs (45.3kg)
ers and thermometer supports.
Saybolt Viscosity Bath, 120V 60Hz H-2166A
Saybolt Viscosity Bath, 220-240V 50/60Hz H-2166A.4F
Shipping wt. 82 lbs (37kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 267
ASPHALT Viscosity
H-2175

H-2177

H-2171 H-2180
H-2189
H-2184 H-2199

*
H-2176
CAUTION
These thermometers contain mercury. There
are restrictions on their sale and shipment. Please check
laws in your area or contact us before ordering. Due to
H-2196 Illinois law, Humboldt must drop-ship these items from New
H-2174
H-2173 Jersey. Mercury Thermometers require ground shipment
H-2174C in the U.S. and International and air shipments ship as
Dangerous Goods.

Test Apparatus Setup for bituminous materials Saybolt Viscosity Bath Accessories
Components
ASTM D88, D244, E102; AASHTO T72
Description Qty. Model # Description Model
Description Model
H-2165 Tubes with Orifices
H-2165.4F Cleaning plunger H-2175
Saybolt viscometer bath 1 Brass saybolt viscometer tube
H-2166A Bororsilicate glass receiving
H-2176 w/ stainless steel H-2180
H-2166A.4F flask, 60ml (for H-2165) universal orifice
Viscometer tube 4 H-2180
Bororsilicate glass receiving Brass saybolt viscometer tube
H-2179 H-2182
Furol orifice 4 H-2174 flask, 60ml (for H-2166)
w/stainless steel furol orifice
Displacement ring 4 H-2194 Withdrawal tube H-2177
Stainless saybolt viscometer
Receiving flask for H-2165 4 H-2176 Oil strainer H-2178
Tube w/stainless steel furol H-2183
or Technical oil, white, (1 gal.) suit- orifice
Borosilicate flask for H-2166 4 H-2179 H-2189
able for use up to 230°F (110°C)
Brass saybolt viscometer tube
Technical oil, white 5 H-2189 High-temp. Dow-Corning 200 w/stainless steel
fluid (100 centistokes), H-2199 H-2184
ASTM Thermometer* 1 H-2600.17F universal and furol orifice,
5 gallon, wt.40lb (18kg) includes wrench
or
ASTM Thermometer* 1 H-2600.17C Displacement ring H-2194
Stainless saybolt viscometer
Thermometer support H-2195 tube w/ universal and furol H-2185
Test Apparatus Setup for lubricants, insulating oils Orifice wrench H-2196 orifice, includes wrench
and heater fuels
Socket wrench H-2197 Orifices
Description Qty. Model #
Thermometer* (66 to 80°F) H-2600.17F Stainless steel universal H-2173
H-2165 Thermometer* (19 to 27°C) H-2610.17C Stainless steel furol H-2174
H-2165.4F
Saybolt viscometer bath 1 Thermometer* (94 to 108°F) H-2600.18F Stainless steel furol, calibrated H-2174C
H-2166A
H-2166A.4F Thermometer* (34 to 42°C) H-2610.18C Tubes
Thermometer* (120 to 134°F) H-2600.19F Stainless steel saybolt
Viscometer tube 4 H-2180
H-2171
Thermometer* (49 to 57°C) H-2610.19C viscometer tube
Universal orifice 4 H-2173
Thermometer* (134 to 148°F) H-2600.20F
Receiving flask for H-2165 4 H-2176 Brass saybolt viscometer tube H-2172
Thermometer* (57 to 65°C) H-2610.20C
or
Borosilicate flask for H-2166 4 H-2179 Thermometer* (174 to 188°F) H-2600.21F

Technical oil, white 5 H-2189 Thermometer* (79 to 87°C) H-2610.21C

Thermometer* (204 to 218°F) H-2600.22F
ASTM thermometer* 1 H-2600.17F
or Thermometer* (95 to 103°C) H-2610.22C
ASTM thermometer* 1 H-2600.17C

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

268
Viscosity, Softening Point ASPHALT

H-1400

H-1530.2

H-1535

H-2560
Ford Viscosity Cups
ASTM D333, D365, D1200 H-1510
Used in determining viscosity of paint, lacquers Digital, Auto Ring and Ball Apparatus
Cloud and Pour Point Apparatus Set ASTM D36; AASHTO T53; EN 1427; BIS 2000;
and related coatings. Cup body is machined from
ASTM D97, D117, D2500 DIN 52011; UNE 7111
aluminum; orifice is brass. Orifice not included
with H-1530 cup, order from chart below. Cup/ Used to test flow characteristics of petroleum oils Designed for speed and accuracy, this ring and ball
Orifice combinations should be selected to pro- using cloud and pour points. Includes glass bath apparatus automatically determines the softening
vide an efflux time within the 20 to 100-second jar, polished brass cylinder mounted on metal tri- point of asphalts and pitches. Two laser sensors
range. Measurements with the Ford viscosity cup pod base, glass test cylinder, cork bottom disc and detect the fall of the ball, detecting and recording
should be made at a temperature of 25°C ±0.1° top rings. Order thermometer separately. the softening point of the test material.
(77°F ±0.2°) with a H-2610.17C (or H-2600.17F) Cloud and Pour Point Apparatus Set H-2560 Touch-screen graphical interface allows for easy
thermometer. Order thermometers and stand Shipping wt. 5.3 lb (2.4kg) setup of the parameters and the immediate exe-
separately. Cloud and Pour Components cution of the test. The high-resolution color display
Ford Cup w/ No. 1 Orifice H-1530.1 Description Model offers all functions of a PC for the management
Ford Cup w/ No. 2 Orifice H-1530.2 Metal tripod base H-2560.1 and analysis of data, test results and graphs. Bath
Ford Cup w/ No. 3 Orifice H-1530.3 temperature is measured by an electronic system
Ford Cup w/ No. 4 Orifice H-1530.4 Glass test jar H-2560.3
maintaining the gradient (5°C/min) as specified by
Ford Cup w/ No. 5 Orifice H-1530.5 Glass battery bath jar H-2560.5 the standard. Provides real-time visualization of the
Shipping wt. 1.2 lb (0.5kg) Brass cylinder H-2560.2 temperature/time graph for the entire test. A mag-
Viscosity Cup Stand Cork disks H-2595 netic stirrer with electronic speed adjustment from
Features leveling base and adjustable support Cork rings H-2598 0 to 160rpm also ensures a uniform temperature in
bracket for H-1530 Ford viscosity cup. the vessel during the complete test.
Thermometer* -36 to 120°F H-2600.5F
Viscosity Cup Stand H-1535 Unit provides the ability to test with boiled distilled
Thermometer* -38 to 50°C H-2610.5C
Shipping wt. 5 lbs (2.3kg) water for softening points from 30 to 80°C and 80°
Thermometer* -112 to 70°F H-2600.6F
Asphalt Viscosimeter Float Test Set up to 150°C using glycerol.
ASTM D139, AASHTO T50 Thermometer* -80 to 20°C H-2610.6C
Export data to a PC via USB flash drive or SD card
Used to test flow behavior or consistency of cer- Spot Test of Asphaltic Materials Set with the ability to edit the data easily with Excel.
tain bituminous materials and tar products via a AASHTO T102 Multiple languages are built in.
float test. Includes calibrated aluminum float and Digital, Auto Ring and Ball Apparatus H-1567.4F
Spot test set only for asphaltic products derived
three brass collars. Individual components can be Shipping wt. 66 lb (30kg)
from petroleum not to be used for natural
ordered. Order thermometer separately.
asphalts containing non-bituminous matter insol-
Asphalt Viscosimeter Float Test Set H-1400 uble in xylene. Includes 250ml erlenmeyer flask,
Shipping wt. 0.6 lb (0.27kg)
Description Model
filter paper, 10ml pipette and rubber stopper.
Float Test Set Components Steel ball, 9.5mm dia. H-1567.1
Spot Test of Asphaltic Materials Set H-1510
Description Model Shipping wt. 3 lb (1.3kg)
Brass, tapered ring, chromed H-1567.2
Centering guide, chromed-brass H-1567.3

*
Float only H-1410
Collars only (set of three) H-1420 CAUTION Beaker, 600ml pyrex H-4911.600
These thermometers contain mercury. There
are restrictions on their sale and shipment. Please check
Calibration rods (2) H-1567.4
laws in your area or contact us before ordering. Due to
Illinois law, Humboldt must drop-ship these items from New
Jersey. Mercury Thermometers require ground shipment
in the U.S. and International and air shipments ship as
Dangerous Goods.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 269
ASPHALT Softening Point

Shown with
Thermometers, H-1575 H-1588
not included,
order separately

H-1569 H-8900

H-8980

Description Model
Brass, shouldered ring, Top:
H-1596 23mm OD, 19.8mm ID; Bottom:
H-1595 19mm OD, 15.9mm ID; Top to
H-1570 H-1575
Shoulder: 4.4mm High; Shoul-
Softening Point Apparatus, Double Softening Point Apparatus Set w/ Hotplate der to Bottom: 2mm High, 10
ASTM E28; AASHTO T53 Single ring and ball method softening point appa- per package
Softening Point Test Individual Components
Ring and ball method Apparatus for softening ratus set, including hotplate. This set can be used Hardened steel ball, .375"
point determinations for use with asphalts, pitches, for single determinations such as: asphalts, pitches, 99.5mm) dia.; weight between H-1580
tars and most resins. Includes 800ml beaker with tars and most resins. Includes 6" x 6" electric hot- 3.45 and 3.55g, 10 per package
brass, double set-up fixture with cover and ther- plate as a heat source rather than a gas burner.
Ball centering guide for shoul-
mometer port with stopper, 2 shouldered rings, 2 The hotplate provides an easy-to-set analog tem-
perature control knob with graduated scale and dered rings, ball is centered H-1588
ball centering guides and 2 standard balls. Order on specimen by 3 locator pins
required thermometer separately. LED display. Temperature range is: ambient to
540°C (Ambient to 1004°F). Includes beaker, sup- Ring and stem assembly with
Softening Point Apparatus, Double H-1569
port stand, 1 ring, wire gauze with ceramic center, 16" (406mm) long brass wire H-1602
Shipping wt. 2lbs (.9kg)
thermometer clamp, 1 shouldered ring and stem stem with shouldered brass ring
Softening Point Apparatus, Quad
with hardened steel ball. Order required ther- Steel, clamp hook supports sus-
Ring and ball method Apparatus for softening
mometer separately. pended thermometers. Locks
point determinations for use with asphalts, pitches,
Softening Point Apparatus Set w/Hotplate into any position with check nut,
tars and most resins. Includes 800ml beaker with
120V 60Hz H-1596 Maximum distance from center H-8900
brass, quad set-up fixture with cover and ther- 220V 50/60Hz H-1596.4F
mometer port with stopper, 4 shouldered rings, 4 of muff to hook: 4.25" (108mm),
Shipping wt. 18.4lbs (8.3kg)and
ball centering guides and 4 standard balls. Order minimum distance is: 3.875"
required thermometer separately. Thermometers* for Softening Point Apparatus (89mm)
Softening Point Apparatus, Quad H-1570 Thermometer clamp with
Description Model
Shipping wt. 2lbs (.9kg) adjustable 360° muff, phos-
30 to 180°F (ASTM 15F) H-2600.15F H-8950
Softening Point Apparatus Set w/ Burner phor-bronze jaws, 3.5" (89mm)
Single, ring and ball method softening point -2 to 80°C (ASTM 15C) H-2610.15C long
apparatus set, including burner. This set can be Thermometer clamp, similar to
85 to 392°F (ASTM 16F) H-2600.16F
used for single determinations such as: asphalts, H-8950, but holds H-1602 ring
30 to 200°C (ASTM 16C) H-2610.16C H-8980
pitches, tars and most resins. Includes burner, and stem and thermometer
beaker, support stand, 1 ring, wire gauze with 30 to 350°F (ASTM 113F) H-2600.113F together
ceramic center, thermometer clamp, 1 shoul- -1 to 175°C (ASTM 113C) H-2610.113C Base (Cast iron) w/ Support Rod H-21220
dered ring and stem with hardened steel ball.
Burner H-6220
Order required thermometer separately.

*
Beaker, 800ml, Graduated H-4911.800
Softening Point Apparatus Set w/Burner H-1595 CAUTION
Shipping wt. 10lbs (4.5kg) These thermometers contain mercury. There Hot plate, 6" x 6"
H-4942
are restrictions on their sale and shipment. Please check with LED Display
laws in your area or contact us before ordering. Due to
Illinois law, Humboldt must drop-ship these items from New
Wire Gauze, 5" x 5" w/ceramic
H-25865
Jersey. Mercury Thermometers require ground shipment material center
in the U.S. and International and air shipments ship as
Dangerous Goods.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

270
Samplers, Flash Point, Residue ASPHALT

H-1990A
H-2405B

H-2405S

H-2407B

H-2400 H-2495
Bacon Bomb Samplers, 8oz. (237ml) Equipped with plunger locking cam for tight clo- Includes Tag Open Cup Flash Point Tester, boro-
ASTM D4057, D6074, D1265 sure during transport. Available in plated brass or silicate glass sample cup, liquid bath with con-
Bacon Bomb Samplers can be used to obtain sam- stainless steel. 2.75" dia. x 15.25"L. (70 x 387mm). stant level overflow and manual. Order leveling
ples from storage tanks, tank cars and drums. when Bacon Bomb Sampler, 32oz, Brass H-2407B device and draft shield separately. Order nec-
the sampler is lowered into the tank and hits the Bacon Bomb Sampler, 32oz, Stainless H-2407S essary ASTM 9C mercury thermometer locally.
bottom, a plunger assembly opens to admit the Shipping wt. 8lbs (3.6kg) Illinois law prohibits us from selling mercury
material. The plunger closes again when the bomb Weighted Beaker thermometers.
is withdrawn, forming a tight seal. Equipped with For beaker sampling from tank cars, tank trucks, Tag, Open-Cup Tester, 120V 60Hz H-1990A
plunger locking cam for tight closure during trans- shore tanks, ship and barge tanks. Copper con- Tag, Open-Cup Tester, 230V 50/60Hz H-1990A.4F
port. Available in plated brass or stainless steel. struction with weighted bottom. Includes han- Shipping wt. 37.1lbs (16.8kg)

2" dia. x 10" L. (51 x 254mm). dle and chained cork. Takes all level samples, as Parts for Tag, Open-Cup Flash Tester
Bacon Bomb Sampler, 8oz, Brass H-2405B well as running and outlet samples. Select .75"
Description Model
Bacon Bomb Sampler, 8oz, Stainless H-2405S (19mm) opening for light crude oils, light lubri-
Replacement Pyrex cup H-1990.1
Shipping wt. 4lbs (1.8kg) cating oils, kerosenes, gasolines, transparent
Bacon Bomb Samplers, 16oz. (473ml) gas oils, diesel fuels and distillates. Select 1.5" Leveling device H-1990.2
ASTM D4057, D6074, D1265 (38mm) for heavy crude and fuel oils, heavy lubri- Thermometer,
H-2600.9F*
cating oils and nontransparent gas oils. Body is range: 20 to 230°F
Bacon Bomb Samplers can be used to obtain sam-
ples from storage tanks, tank cars and drums. when 3.375" dia. x 14"L. (86 x 356mm). Thermometer, range:
H-2610.9C
Weighted Beaker, .75" (19mm) H-2400 -5 to 110°C
the sampler is lowered into the tank and hits the
bottom, a plunger assembly opens to admit the Weighted Beaker, 1.5" (38mm) H-2401
material. The plunger closes again when the bomb Shipping wt. 5lbs (2.2kg) Conradson Carbon Residue Apparatus
is withdrawn, forming a tight seal. Equipped with Tag, Open-Cup Flash Tester ASTM D189, D2416
plunger locking cam for tight closure during trans- ASTM D1310, D3143; AASHTO T79 Tests petroleum products to determine the amount
port. Available in plated brass or stainless steel. For determination flash and fire points of liquids of carbon residue left after evaporation and pyrol-
2.75" dia. x 12"L (70 x 305mm). at temperatures of up to 325°F (163 °C) and flash ysis of an oil and to indicate relative coke-form-
Bacon Bomb Sampler, 16oz, Brass H-2406B points of cutback asphalts at temperatures of less ing propensities. Includes burner, tripod, refrac-
Bacon Bomb Sampler, 16oz, Stainless H-2406S than 200°F (93 °C) as per test methods ASTM tory block, nickel chrome triangle, nickel crucible
Shipping wt. 6lbs (2.7kg) D1310, D3143 and related test specifications. and cover, Skidmore crucible, porcelain crucible
Bacon Bomb Samplers, 32oz. (946ml) and monel hood and bridge. Component parts
Determines Tag Open-Cup flash point of liquid
ASTM D4057, D6074, D1265 available separately.
products and cutback asphalts. Includes sample
test cup, plated brass liquid bath with constant Conradson Carbon Residue Apparatus H-2495
Bacon Bomb Samplers can be used to obtain sam-
level overflow, pivoting ignition taper with pilot Shipping wt. 7.1lbs (3.2kg)
ples from storage tanks, tank cars and drums. when
light and reference bead, pivoting thermometer Parts for Conradson Apparatus
the sampler is lowered into the tank and hits the
bottom, a plunger assembly opens to admit the holder, heater and base. Description Model
material. The plunger closes again when the bomb Electrically heated model is equipped with step- Porcelain crucible H-2494
is withdrawn, forming a tight seal. less variable heat control for accurate control of Skidmore crucible and cover H-2497
temperature rate of rise per specification. Gas
Carbon residue apparatus hood H-2496
heated model also available.
Nickel crucible with cover H-2498
Refractory block insulator ring H-2505

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 271
ASPHALT Cleveland Flash Point

H-2095
H-2100

H-2085
Cleveland Flash and Fire Point Tester Cleveland Flash and Fire Point Tester
ASTM D92, D117; AASHTO T48 ASTM D92, D117; AASHTO T48
Cleveland Flash and Fire Point Tester
Used to determine flash and fire points by the Used to determine flash and fire points by the
Cleveland open-cup method. Consists of electric Cleveland open-cup method. Consists of a Hum- ASTM D92, D117; AASHTO T48
Heater with rheostat, flash point platform with boldt, high-temperature burner, which is directly Used to determine flash and fire points by the
Thermometer holder, test burner and flash cup. attached to the test support stand, for sample Cleveland open-cup method. Consists of a
Utilizes a 1250W-10 amp, nickel-chromium heater heating with a built-in, gas line extension for the free-standing, Humboldt, high-temperature
with stepless variable control for accurate, repeat- test flame. Test flame burner and the heating burner and a separate test flame burner, which is
able, rate-of-rise temperature settings per spec- burner include separate, integral, adjustment con- directly attached to the test support stand. Test
ifications. Heater is enclosed in a stainless steel trols for regulating the flame. Includes flash point flame burner and the heating burner include sep-
housing with cooling vents. platform with thermometer holder, test burner and arate, integral, adjustment controls for regulating
Thermometer position is adjustable and pro- flash cup. the flame. Includes flash point platform with Ther-
vides the ability to raise the thermometer out of Thermometer position is adjustable and provides mometer holder, test burner and flash cup.
the way to facilitate the placement and removal the ability to raise the thermometer out of the Thermometer position is adjustable and provides
of the test cup. Test flame requires a gas supply way to facilitate the placement and removal of the the ability to raise the thermometer out of the
and the test flame can be adjusted through the use test cup. Flame size is adjustable through the use way to facilitate the placement and removal of the
of the built-in needle valve. Order thermometer of the built-in needle valve. Order thermometer test cup. Flame size is adjustable through the use
separately. separately. of the built-in needle valve. Order thermometer
Cleveland Flash Tester, 115V 60Hz H-2085 Cleveland Flash Tester, Gas H-2095 separately.
Cleveland Flash Tester, 220V 50/60Hz H-2085.4F Shipping wt. 15lbs (6.8kg)

Shipping wt. 14lbs (6.3kg)

Replacement Parts Cleveland Flash Tester, Natural Gas H-2100
Shipping wt. 19lbs (8.6kg)
Replacement Parts Description Model
Description Model Cast-Iron support base H-21335 Replacement Parts
Electric heater High-temp burner w/ Description Model
H-2085.1 H-5605X
with rheostat (1250W) adjustable valve orifice Cast-iron support base H-21335
Flash-point platform H-2085P Test burner w/ holder H-2112 Support rod H-21370
Test burner w/ holder H-2112 Flash-point platform H-2095P High-temp. burner H-5550
Flash cup H-2060 Supra-board plate H-2095.4.2 Test burner H-2112
Supra-board plate H-2095.4.2 Platform coupling assembly H-2095.5 Flash cup platform H-2111
Thermometer* H-2600.11F Flash cup H-2060 Flash cup H-2060

*
Thumb screw H-3050.7 Thermometer clamp H-8900
CAUTION Thermometer* H-2600.11F Thermometer* H-2600.11F
These thermometers contain mercury. There
are restrictions on their sale and shipment. Please check
laws in your area or contact us before ordering. Due to
Illinois law, Humboldt must drop-ship these items from New
Jersey. Mercury Thermometers require ground shipment
in the U.S. and International and air shipments ship as
Dangerous Goods.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

272
Distillation ASPHALT

H-2600.7F
purchase separately
H-2290A
(concealed)
H-2430.3
H-4998 H-2345TTS
H-2330
H-2290B H-2345TS H-8572
H-2340RS
H-8390
H-8325
H-1910.7S
H-1910.4 H-1876
H-8342
H-2340 H-8342
H-2340RS
H-8522 H-2345
H-1910.4 H-6220 or H-2435*
H-8325 H-1871

H-21700

H-1871
H-8325

H-4915.100 H-21212 H-21212 H-21232 H-1876

H-2285 or H-2290
H-21232
H-2440

H-2440, H-2442

Distillation Set for Residue and Oil Distillate in Distillation Set Components Dean Stark Moisture Test Apparatus, Gas Type
Emulsified Asphalts Description Model ASTM D95, D244, D1461,E123; AASHTO T59, T110
ASTM D6997; AASHTO T59 Still, aluminum, small H-1871 The Dean Stark moisture test apparatus is used to
The distillation set is designed to meet the require- determine the water content in petroleum prod-
Ring burner H-1876
ments of the Standards listed above. Use of this ucts, tars, emulsified asphalts and other bitumi-
Support stands (2 in set) H-21212
set will allow the user to accurately determine the nous materials by the distillation method. The dis-
representative portion of residue in emulsified Support stand H-21232 tillation process allows the water in the test sample
asphalts. Two models are available, The H-2285 Support shelf H-21700 to be isolated and collected in the receiver of the
uses the large H-2345 still and the H-2290 uses Burner H-6220 Trap. This model uses an aluminum still, which is
the small H-1871 still. For a detailed explanation of Condenser H-2340 heated by a gas, ring burner. The complete set is
the test procedure refer to the ASTM or AASHTO comprised of the items listed in the table below.
Graduated cylinder H-4915.100
standards listed above. The complete set is com-
Tube shield H-2330 Description Model
prised of the items listed in the chart below. Order
Straight glass tube H-2290B Ring burner H-1876
H-2600.7F thermometer separately.
Distillation Set for Emulsified Asphalt H-2285 Bent glass tube H-2290A Aluminum still, 0.95L H-1871
Shipping wt. 28lbs (12.7kg) Adapter H-1910.4 Distillation trap, H-2435.25
Distillation Set for Emulsified Asphalt H-2290 Clamp, brass H-8325 20ml, 25ml, or 10ml H-2435.10
Shipping wt. 30lbs (13.6kg)
Clamp H-8390 Condenser, liebig H-2430.3
Clamp holders (2 in set) H-8342 Support stand H-21232
Clamp H-8522 Clamp, brass H-8325

*
Rubber tubing H-4998 Clamp, round jaw, coated H-8572
CAUTION Still stopper (1) H-2345TTS
These thermometers contain mercury. There Dean-Stark, Gas-Heated, 20ml H-2440
are restrictions on their sale and shipment. Please check Stopper, ptfe H-2345TS Dean-Stark, Gas-Heated, 10ml H-2442.10
laws in your area or contact us before ordering. Due to
Stoppers, rubber (2) H-2340RS Dean-Stark, Gas-Heated, 25ml H-2442.25
Illinois law, Humboldt must drop-ship these items from New Shipping wt. 30lbs (13.6kg)
Jersey. Mercury Thermometers require ground shipment Stopper, rubber H-1910.7S
in the U.S. and International and air shipments ship as
Dangerous Goods.
Digital Thermometers are available
for replacing mercury thermometers,
see pages: 288-290, 294.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 273
ASPHALT Distillation

H-1910.6
H-1940
H-2430.3
H-1910.3
H-8002
H-8572
H-1910.1
H-8325
H-1910.3S
H-1910.7S
H-1910.4 H-25885 H-18355
H-2435* H-1945
H-2450
H-6220

H-2430.4

H-21700
H-2430.1

H-4915.100
H-21232 H-21212 H-21222

H-1910
H-1550
H-2430
Dean Stark Moisture Test Apparatus, Electric Particle Charge Meter Stainless Steel Plates
ASTM D95, D244, D1461,E123; AASHTO T59, T110 ASTM D7402; AASHTO T59
Distillation Set for Cut-Back Asphaltic The dean stark moisture test apparatus is used to Set of two 1" x 4" (25.4 x 101.6mm) stainless steel
(Bituminous) Products determine the water content in petroleum prod- plates for use with H-2450.
ASTM D402; AASHTO T78 ucts, tars, emulsified asphalts and other bitumi- Particle Charge Meter Plates H-2452
The H-1910 distillation set is designed to meet the nous materials by the distillation method. The dis- Shipping wt. 0.3lbs (.1kg)
requirements of the Standards listed above. Use of tillation process allows the water in the test sample Solubility of Bituminous Materials Test Set
this set will allow the user to measure the amount to be isolated and collected in the receiver of the ASTM D4, D2042; AASHTO T44
of the more volatile constituents in cutback asphal- Trap. This model uses a glass flask, which is heated Test set is used to determine the degree of solubil-
tic products. For a detailed explanation of the by an electric heater. The complete set is com- ity in trichloroethylene of asphalt materials having
test procedure refer to the ASTM or AASHTO prised of the items listed in the table below. little or no mineral matter. The portion that is solu-
standards listed above. The complete set is com- Description Model ble represents the active cementing constituents.
prised of the items listed in the chart below. Order Electric, heater 0-750W H-2430.1 Solubility of Bitumen Material Test Set H-1550
H-2600.8F thermometer separately.
Flask, 500ml H-2430.3 Shipping wt. 6lbs (2.7kg)
Distillation Set for Cut-Back Products H-1910
Shipping wt. 16.8lbs (7.6kg)
Distillation trap, 25ml, H-2435.25 H-1550 Parts Model
or 10ml H-2435.10
Gooch crucible, 28ml H-1550.1
Description Model
Condenser, liebig H-2430.3 Crucible holder H-1550.2
Flask H-1910.3
Support stand H-21232 Buchner funnel H-1550.3
Condenser H-1910.1
Clamp, brass H-8325 Stopper with #7 hole H-1550.5
Adapter H-1910.4
Clamp, round jaw, coated H-8572 Filters, glass fiber, 10pk H-1550.8
Distillation shield H-1940
Flask, 125ml H-1883
Flame shield H-1945 Dean-Stark, Electric-Heated, 10ml H-2430
Dean-Stark, Electric-Heated, 25ml H-2430.4F Rubber tubing H-1448RT
Graduated cylinder H-4915.100
Shipping wt. 30lbs (13.6kg) Filter pump, Chapman H-12020
Burner H-6220
Particle Charge Meter Set Erlenmeyer flask, vented 500ml H-4913.500
Clamp H-8002
ASTM D7402; AASHTO T59
Support ring H-18355
The particle charge meter identifies cationic emul-
Support stand H-21212 sified asphalts by the migration of the particles to a
Support stand H-21222 negatively charged electrode (cathode) by means
Support shelf H-21700 of a direct current. Allows selection of emulsified
Wire gauze H-25885 asphalts that are compatible with the available
Stopper, rubber H-1910.7S aggregate or sand. Set includes particle charge
Stopper, rubber H-1910.1S meter with positive- and negative-identified elec-
trodes; a set of two H-2452 steel plates.
Stopper, cork H-1910.6
Particle Charge Meter Set, 110V 60Hz H-2450
Particle Charge Meter Set, 220V 50/60Hz H-2450.4F
Shipping wt. 12.9bs (1.3g)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

274
Distillation Accessories ASPHALT

H-1876

H-1946
H-1940

H-2330

H-2345 H-1871

H-2340 H-1945
H-2348 H-2435.10
H-2435.25
Still, Aluminum Distillation Shield
ASTM D95, D244, D1461,D6997, E123; ASTM D402; AASHTO T78
AASHTO T59, T110 Use with H-1880. Flanged, open-end, stainless
Used primarily in standards for determining water steel cylinder with .125" ceramic lining and two-
in crude petroleum, tars and derivatives of those part cover. For use with 500ml flask. Flame distil-
materials. Large model, 3.75" x 9.5" (95mm x lation only
241mm) ID, has three tubulures, two drilled 10/18 Distillation Shield H-1940
and one drilled 24/40). The small model, 3.5" x Shipping wt. 1.5lbs (.68kg)
6" (89mm x 152mm) ID, has a 1 qt, (0.95L) capacity Flame Shield
and one tubulure. Both are cast aluminum. ASTM D402; AASHTO T78
Still, Large Aluminum H-2345 Use with H-1880. Stainless steel, spot-welded cone
Still, Small Aluminum H-1871 2" (51mm) dia. at bottom with spring clip to fit H-2435.20
Shipping wt. 6.5lbs (2.9kg) H-2435.5
7/16" to .625" (11 to 16mm) burner tubes.
Glass Distillation Trap, 25ml
Stoppers for Stills Distillation Shield H-1945
ASTM D95, D1461; AASHTO T78
Teflon stoppers for use with H-2345 and H-1871 Shipping wt. 0.3lbs (.1kg)
25ml distillation trap graduated 0.1ml from 0 to
Stills.
Burner Chimney 25ml.
Stopper for Glass Tubing H-2345TS
Fits standard 4" (102mm) rings.
Stopper for Thermometer H-2345TTS Glass Distillation Trap, 25ml H-2435.25
Burner Chimney H-1946
Shipping wt. 0.2lbs (0.09kg) Shipping wt. 1.1lbs (.49kg)
Shipping wt. 3lbs (1.3kg)
Ring Burner Glass Distillation Trap, 10ml
Condenser Jacket
ASTM D244; AASHTO T59 ASTM D95, D1461; AASHTO T78
ASTM D244; AASHTO T59
Can be used with all gases. 4.75" (121mm) ID x 10ml distillation trap graduated 0.1ml from 0 to
For use with H-2285 and H-2290. Brass, 15" long
5.5" (140mm) OD. Overall shank length is 11" 1ml and 0.2ml from 1ml to 10ml.
inlet/outlet tubulures on opposite sides of jacket.
(279mm) with .375" (10mm) serrated hose con-
Condenser Jacket H-2340 Glass Distillation Trap, 10ml H-2435.10
nection. Guide pins keep burner equidistant
Shipping wt. 3lbs (1.3kg) Shipping wt. 1lbs (.49kg)
around still. Fletcher attachment regulates gas
and air. Connecting Tube Shield Glass Distillation Trap, 5ml
ASTM D244; AASHTO T59 ASTM D95, D1461; AASHTO T78
Ring Burner H-1876
For use with H-2285 and H-2290. Stainless steel. 5ml distillation trap graduated 0.1ml.
Shipping wt. 1.4lbs (.63kg)

Connecting Tube Shield H-2330 Glass Distillation Trap, 5ml H-2435.5

Shipping wt. 1lbs (.45kg) Shipping wt. 1lbs (.45kg)

Still Cleaner Glass Distillation Trap, 20ml

Use with H-1871 and H-2345. Tool to remove res- 20ml distillation trap graduated 0.1ml.
idue from interior of still, 13" x 4" (328 x 101mm) Glass Distillation Trap, 20ml H-2435.20
diameter. Shipping wt. 1.5lbs (.68kg)
Still Cleaner H-2348
Shipping wt. 1.3lbs (.58kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 275
ASPHALT Extraction

H-1461

H-1456

Centrifuge Extractor (Explosion Proof) Centrifuge Extractor (Open Motor) Auto Centrifuge Extractor (Open Motor)
ASTM D2172; AASHTO T164 ASTM D2172; AASHTO T164 ASTM D2172; AASHTO T164
Available in 1500g and 3000g capacities, these This extractor is an open-motor version of the This extractor is an open-motor version of the
extractors conform to the explosion-proof stan- explosion-proof models described above. While it explosion-proof models described above. While it
dards for the safety of operating personnel. is safe to operate, it does not provide the added is safe to operate, it does not provide the added
All models feature a removable aluminum bowl safety of the explosion-proof design. This extractor safety of the explosion-proof design. This extractor
assembly, which quickly lifts out of the sealed hous- is a great economical choice or for those who need is a great economical choice or for those who need
ing for efficient specimen handling. A simple, con- an extractor, but may not use it extensively. Not an extractor, but may not use it extensively. Not
trol knob adjusts bowl speed. The heavy, cast-alu- available in 220V model. available in 220V model.
minum bowl cover latches securely in place and Extractor, 1500g, 115V 60Hz H-1456 Centrifuge Extractor, 1500g, 115V 60Hz H-1460
features an integral solvent dispensing cup for easy Extractor, 3000g, 115V 60Hz H-1471 Centrifuge Extractor, 3000g, 115V 60Hz H-1464
Shipping wt. 70lbs (31.7kg) Shipping wt. 76lbs (34.4kg)
pouring of the solvent into the bowl.
Auto Centrifuge Extractor, (Explosion Proof) Centrifuge Extractor Replacement Parts
Extractors are supplied complete with 25 filter
ASTM D2172; AASHTO T164
discs. Replacement filter discs (100-packs) are Description Model
These extractors feature automated, auto control
available, see page: 188. Bowl for H-1456, H-1466 H-1456B
of the unit. Timer allows unit to run unattended
Dimensions: both sizes: 18" x 18" x 18" (457 x 457 Bowl for H-1471, H-1473 H-1471B
for a specific period of time (1 to 10 minutes).
x 457mm). Bowl cover, H-1456, H-1466 H-1456BC
Unit brakes and stops automatically when time
Extractor, 1500g, 115V 60Hz H-1466 expires and holds last test cycle settings in mem- Bowl cover, H-1456, H-1466 H-1471BC
Extractor, 1500g, 220V 50/60Hz H-1466.4F ory for repeatable tests. Time and speed can be
Extractor, 3000g, 115V 60Hz H-1473 Cover nut H-1471N
set quickly with the rotating dials below the digital
Extractor, 3000g, 220V 50/60Hz H-1473.4F Clamp, all models H-1471C
Shipping wt. 75lbs (34kg) display that shows the settings. The controller can
also be wall- or remotely-mounted for visual ease O-Ring, all models H-1471RV
as well as vibration isolation. Brake band, all models H-1456BB
Power is supplied by a reliable 1/8hp DC motor. Brake band assembly, all H-1471BBA
Extractors are supplied complete with 25 filter
discs. Replacement filter discs (100-packs) are See page 276 for centrifuge extractor filter paper.
available, see page: 188.
Extractor, 1500g, 115V 60Hz H-1461
Extractor, 1500g, 220V 50/60Hz H-1461.4F
Extractor, 3000g, 115V 60Hz H-1465
Extractor, 3000g, 220V 50/60Hz H-1465.4F
Shipping wt. 114lbs (51.7kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

276
Extraction ASPHALT

H-1449A

H-1485.627

H-1857A

Filter Papers for Centrifuge Extractors Vacuum Extractor Components & Accessories Centrifuge Extractor, Filterless
All filter papers for centrifuge extractors have a ASTM D1856; AASHTO T164
Description Model
medium speed and a flow rate of 85 ml/min. The The continuous-flow filterless centrifuge extractor
Fluorosilicone o-ring H-1448.1
thickness is 0.71" with a 4 micron retention. Filters is ideally suited for use in the extraction of mineral
come in packages of 100. Stainless steel plate, fines from bitumen-laden solvents obtained from
H-1448P
as provided standard asphalt extraction tests. In operation,
Extractor / Size Model Stainless steel plate, the solvent suspension is fed through the top fun-
H-1448HP nel into a special aluminum beaker, (2) H-1857.5
heavy-duty
H-1451, H-1452 supplied). Using the high, 11,000 rpm centrifugal
H-1481.627 Rubber Tubing H-1448RT
(9.75"OD x 1.75"ID) force, the liquid moves up the beaker wall and out
H-1474 Clear, Heavy-wall, the overflow tube while the solids remain for easy
H-1485.627 H-1446
(11.625"OD x 5"ID) Vacuum Tubing removal at test completion. The system allows the
H-1456, H-1466, H-1460, H-1461 4,000cc erlenmeyer flask, continuous feeding of the suspension until the sol-
H-1487.627 ids-retaining capacity of the beaker is reached. The
(10"OD x 5"ID) meets ASTM D2172 and H-4913.4M
AASHTO T164 (Method E) unit is supplied complete with a No. 18 (1.0mm)
H-1471, H-1473, H-1464, H-1465 and No. 200 (75μm) sieve for placement at the
H-1489.627
(12.25"OD x 5"ID) 8" Sieve adapter H-1447 top of the inlet funnel. Using this arrangement, an
High-vacuum pump H-1763A asphalt mix extraction test can be carried out by
Filter Papers for Centrifuge Extractors See chart (see page 165 for info) H-1763A.4F pre-dissolving the mix with solvent and then pour-
Shipping wt. 4lbs (1.81kg) ing the sample into the sieve. Dimensions: 20" x
Vacuum Extractor 15" x 33" (508 x 380 x 840mm).
ASTM D2172 (Method E); AASHTO T164 Centrifuge Extractor, Filterless
Basic vacuum extractor for use in quantitative 120V 60Hz H-1857A
determinations of bitumen in hot-mixed paving 230V 60Hz H-1857A.2F
230V 50Hz H-1857A.5F
mixtures and pavement samples. The H-1449 Shipping wt. 154lbs (69.8kg)
provides a 12" (305mm dia filtering surface. Unit
Aluminum Beaker
includes a connecting hose, (100) H-1497.613 filter
Replacement aluminum beaker for use with the fil-
papers and test procedure instructions. Use with a
terless centrifuge extractor.
4,000cc erlenmeyer flask and a vacuum pump, see
Aluminum Beaker H-1857.5
below. For replacement filter paper, use H-1497
Shipping wt. 2lbs (.9kg)
series paper.
Vacuum Extractor H-1449A Filter Papers for Vacuum Extractors
Shipping wt. 58.6lbs (26.5kg) Flow Rate Retention
Size Filter Speed Thickness Per Pkg. Model
(ml/min.) (μm)
33cm dia. Very fast 360 0.51 48 50 H-1497.617
33cm dia. Very fast 435 1.02 31 100 H-1497.633
33cm dia. Fast 235 0.25 24 100 H-1497.615
33cm dia. Medium 60 0.17 6 100 H-1497.613
33cm dia. Medium 85 0.71 4 100 H-1497.627

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 277
ASPHALT Extraction
H-1495.2A
H-1499.2A

H-1494A

H-1495.1
H-1499.1

H-1440

H-1497.613
H-1499 H-1495

Reflux Extractor Sets Reflux Extractor, 2000g Components Asphalt Dispensers

ASTM D2171, D2172; AASHTO T164 Method B Round, melting pot has stainless steel crucible (18
Description Model
Used to determine the percentage of bitumen in a gauge) and shell (20 gauge) to facilitate easy clean
paving mixture using hot solvent extraction. Avail- Wire screen cone, 1000g up. Choice of 6 quart, or 12 quart models. Includes
H-1499.1
able in 1000g and 3000g versions. sample holder (set of 2) heavy-duty, adjustable bench mounting stand,
The 1000g set includes: (2) 500g wire screen 0.5" Tube copper condenser which fits either size. Dual-point temperature
H-1499.2A control allows independent temperature for pot
cones, copper condenser with 0.5" inlet/outlet w/ inlet/outlet water tubes
water tubes, glass jar 6" OD x 18" H (152mm x (0-350°) and for valve (1-10°). Digital display may
Glass Jar
457mm) with ground open edges for a tight fit, H-1499.3 be read in either Centigrade or Fahrenheit. Other
with ground open edges
a H-4942, 6" square hot plate and a 100-pack of features include: multiple-circuit blanket heater for
Electric hot plate H-4943
33cm filter paper. very uniform heat; no-drip 1" ball valve dispenser,
Filter paper, 40cm, 100-pack H-1498.613 7.25" (184mm) above work surface; 50-watt valve
The 2000g set includes: (2) 1000g wire screen
FibreChem circle, 8.5" H-1496 heater; 3" (76mm) fiberglass insulation; separate
cones, copper condenser with 0.5" inlet/outlet
aluminum cover; 6' power cord.
water tubes, glass jar 8.75" OD x 18" H (222mm Pressure Limit Device
x 457mm) with ground open edges for a tight fit, 6-qt capacity— 800 watts; 1
For use with reflux extractor kits to protect copper
a H-4943, 9" square hot plate and a 100-pack of condenser from excessive pressure. For use with 2-qt capacity— 1,200 watts;
40cm filter paper. 0.5" tubes. Asphalt Dispenser, 6Qt, 120V 60Hz H-1440
Reflux Extractor, 1000g, 120V 60Hz H-1495 Asphalt Dispenser, 6Qt, 220V 50/60Hz H-1440.4F
Pressure Limit Device H-1494A Shipping wt. 30lbs (14kg)
Reflux Extractor, 1000g, 220V 50/60Hz H-1495.4F
Shipping wt. 0.5lbs (0.22kg)
Shipping wt. 29.3lbs (13.2kg) Asphalt Dispenser, 12Qt, 120V 60Hz H-1442
Reflux Extractor, 2000g, 120V 60Hz H-1499 Asphalt Dispenser, 12Qt, 220V 50/60Hz H-1442.4F
Reflux Extractor, 2000g, 220V 50/60Hz H-1499.4F Filter Papers for Reflux Extraction Shipping wt. 20lbs (19.1kg)
Shipping wt. 55lbs (24.9kg) Filter papers for use with reflux extractor sets.
Reflux Extractor, 1000g Components Flow Rate Retention Per
Size Filter Speed Thickness Model
Description Model (ml/min.) (μm) Pkg.

Wire screen cone, 500g 33cm dia. Very fast 360 0.51 48 50 H-1497.617
H-1495.1
sample holder (set of 2) 33cm dia. Very fast 435 1.02 31 100 H-1497.633
0.5" Tube copper condenser 33cm dia. Fast 235 0.25 24 100 H-1497.615
H-1495.2A
w/ inlet/outlet water tubes 33cm dia. Medium 60 0.17 6 100 H-1497.613
Glass jar 33cm dia. Medium 85 0.71 4 100 H-1497.627
H-1495.3
with ground open edges
40cm dia. Medium 85 0.71 4 100 H-1498.627
Electric hot plate H-4942
40cm dia. Medium fast 60 0.17 6 100 H-1498.613
Filter paper, 33cm, 100-pack H-1497.613
40cm dia. Medium fast 235 0.25 24 100 H-1498.615
FibreChem circle, 8.5" H-1496
40cm dia. Very fast 300 0.51 48 50 H-1498.617
(40cm filter paper is used with H-1499 only)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

280
280
Air
Air M
Meters
eters PAVEMENT
PAVEMENT

www.humboldtmfg.com
w
ww w hu
w. humb
mb
b ol
o dt
dtm
mff g.
m g . co
c o m • 1.
1.800.544.7220
1 .80
.80
800.
0.54
5444..72
.72
7220
20 • 708.468.6300
708.
70 8.46
468.
4688.6
6330
000
 PAVEMENT
Benkelman Beam. . . . . . . . . . . . . . . . 282 High-Low Detector . . . . . . . . . . . . . . . 283
Core Drills . . . . . . . . . . . . . . . . 280-281 Permeameter, Asphalt . . . . . . . . . . . . . . 285
Core Drill Accessories . . . . . . . . . . . . . . 282 Permeameter, NCAT . . . . . . . . . . . . . . 285
Core Drill Bits . . . . . . . . . . . . . . . . . 282 Polishing Machine . . . . . . . . . . . . . . . 284
CoreSnap . . . . . . . . . . . . . . . . . . 282 Skid Resistance Tester . . . . . . . . . . . . . . 284
280
Core Drills PAVEMENT

HR-2800

HR-2850

HR-2500
HR-2508

Hand-Held Core Drill (only) Core Drill, Electric Core Drill, Hand-held, Gas-Powered
The HR-2800 core drill is available alone or in the This core drill provides a flexible, multi-purpose Hand-held, portable, ultra lightweight core drill-
HR-2850 kit with the optional, anchor-bolt base. vacuum/anchor bolt drilling system. It can be used ing machine, gasoline powered; just add gaso-
The core drill provides a powerful 3-speed motor for almost all applications involving floor, wall line and water and start drilling. Perfect for road,
and comes standard with all fittings, including a and ceiling placements, as well as hard-to-reach bridge and fencing contractors. For fast, economic
360° positionable, t-handle for support. It can be places. Includes a two-speed (350-900 RPM), 3.5 drilling—either vertical or horizontal—of concrete/
used with drill bits of up to 3" diameter in the hand- HP 20 amp heavy-duty motor, waterproof switch asphalt and/or auger drilling into soil. One-person
held mode, or up to 4" diameter with the optional box, built-in water swivel, continuous duty oil-less drilling, easy-to-handle, 22 lbs. overall weight.
stand. Includes positioning level on top of the drill. vacuum pump, filter, hose, quick connections and Quick set-up, easy-to-use, reliable. Honda 31cc,
Held Core Drill (only), 120V 60Hz HR-2800 has a 12-inch bit diameter capacity. The drill's 6" 4-cycle gasoline engine, high performance water
Hand Core Drill (only), 220V 50/60Hz HR-2800.4F wheels provide easy maneuvering and its 10" swivel, bit locator. Accepts up to 6" diameter.
Ship wt. 26lbs. (11.8kg) (254mm) wide base is a vacuum pad anchor with Features include:
Core Drill with Base Stand more than 1000 pounds of vacuum force that • Designed for concrete/asphalt surfaces
The HR-2850 core drill combines the HR-2800 solidly grips the drilling surface within seconds • Minimize drilling time with gasoline power
Hand-held, electric motor drill, described above making it the ideal drill stand for floors, walls, ceil- • Easy-to-use and quick to set up
with the optional, anchor-bolt base. The base is ings, as well as, pavement. Requires water supply, • One-person, hand-held, core drill machine
roughly 6" x 9" with a 31" tall column. It features if none is available order HR-2516 portable water • 31cc, gasoline powered engine - 4 cycle
a smooth gear action and a dumb bell handle for pressure tank separately. • 7" bit diameter capacity
ease of use in tight areas. The drill features a hand Features include: • Vertical or horizontal drilling
rest on the back/top of the drill to ease drilling • 3.5 HP Milwaukee electric drill motor with • Heavy-duty, quad precision ball bearing
operations. And, the stand's locking collar holds 2-speed gear box gear box
the drill firmly for accurate drilling. • Water swivel
HR-2508
• Drill stand with combination vacuum pad/an-
HR-2800 Motor 31cc, 4-cycle
chor bolt base
Motor 1500 watts Bit capacity 6"
• Large (6") rubber wheels
Bit capacity 3-4"
HR-2500 Auger capacity NA
900, 2000
Speeds (3) Horse power 3.5
4000 Core Drill, Hand-held, Gas-Powered HR-2508
Motor: volts/amps 115/20 Ship wt. 40lbs. (18kg)
Auger capacity NA
Cycle 50/60
Core Drill with Base Stand, 120V 60Hz HR-2850 Bit capacity 12"
Core Drill with Base Stand, 220V 50/60Hz HR-2850.4F
Ship wt. 41lbs. (18.6kg)
Auger capacity NA
Column dimensions 2.5" x 35"
Carriage travel 22"

Core Drill, Electric 120V 60Hz HR-2500

Core Drill, Electric 230V 50/60Hz HR-2500.4F
Ship wt. 130lbs. (60kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 281
PAVEMENT Core Drills

HR-2701

HR-2503E

HR-2600

Core Drill, Mobile Stand, Gas-Powered Core Drill, Hitch-Mounted Core Drill, Trailer-Mounted
This core drill reduces job costs through the faster This hitch-mounted system provides a mobile sys- This complete stand-alone core drill rig offers field
drilling speeds gained from the use of a gas-pow- tem, which provides fast set-up and drilling while independence, versatility, dependability, and easy
ered motor. This drill can be wheeled into place ensuring consistent quality. Setup minimizes time single-person operation. Provides mobile yet very
easily when mounted on its heavy-duty, sturdy plat- required to do jobs reducing job costs. stable drilling platform, which extends bit life. Pro-
form or can also be mounted to a trailer, pickup Features include: vides exceptional solution for remote locations.
or van. • 15 HP gas-powered, electric-start drill head Features include:
Features include: with electric start, with 16" bit capacity • 17 HP gasoline-powered drill head with
• 17 HP gas-powered, electric-start drill head • Accurate drilling with easy positioning and electric start, with 16" bit capacity and a 24"
with electric start, with 8" or 16" bit capacity alignment of drill head travel;
• Accurate and easy drill positioning and plat- • Positioning arm swings 180° in semi-circle • Variable drill head positioning system, which
form movement with its 4" Delrin wheels • Multi-jointed arm allows drilling anyway within allows drill head movement of approx. 43"
• Dead-weight base no anchor bolts required the arc of trailer-hitch mount side-to-side and 12" fore and aft for accurate
• Drill stand • Stand-alone, gasoline-powered system— no hole placement;
Standard package includes: additional power supplies needed • Hydraulic-assisted machine lift for single-hand-
• Drill stand • Easy, one-person mounting or removal using ed removal and replacement of drill;
• 17 HP gasoline-powered, electric-start engine machine's own drill caddy • Lockable, weather-resistant toolbox;
• Variable RPM (300-1500 bit RPM) Standard package includes: • 200-gal. water tank and 12 VDC water pump
• Water swivel • Drill Head with up to 16" bit capacity • 5' x 8' steel-construction trailer, equipped with
• Flexible position receiver mount bracket electric brakes and pre-wired for brake and tail
HR-2503E and HR-2504
• Drill caddy lights.
Horse power 17
• Variable RPM (300-1500 bit RPM) HR-2600 and HR-2601
Cycle 4 • Water swivel
Horse power 17
HR-2503E bit capacity 8" • Drive shaft stabilizer system
HR-2504 bit capacity 16" Cycle 4
HR-2700 and HR-2701
Auger capacity NA HR-2600 bit capacity
Horse power 15 16"
HR-2601 bit capacity
Core Drill, Mobile Gas-Powered — 8" HR-2503E Cycle 4 HR-2600 auger capacity NA
Core Drill, Mobile Gas-Powered — 16" HR-2504 HR-2700 bit capacity HR-2601 auger capacity 8"
Ship wt. 413lbs. (187kg) 16"
HR-2701 bit capacity Carriage travel 24"
HR-2700 auger capacity NA
HR-2701 auger capacity 8" Core Drill, Trailer-Mount 16" Capacity HR-2600
Core Drill, Trailer-Mount, Auger Capability HR-2601
Ship wt. 2000lbs. (907kg)
Core Drill, Hitch-Mount 16" Capacity HR-2700
Core Drill, Hitch-Mount, Auger Capability HR-2701
Ship wt. 604lbs. (274kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

282
Drill Bits, Core Removal PAVEMENT

HR-2514

Be advised that core drill bits

have .125" walls and produce a
HR-2512 core 0.25" smaller than the OD
of the drill bit.

HR-2516 HR-2599

HR-2530.4 HR-2550.25 HR-2554

Core Drill Accessories Diamond Drill Bits Diamond Drill Bits, High-Performance, Small
These professional-quality, diamond, drill bits These professional-quality, diamond drill bits
Description Model are designed for use in drilling asphalt and con- are designed for drilling cured concrete with
Extension rod, 9" (229mm); for drilling crete. They have a total segment height of .320" medium to soft aggregate with or without steel
HR-2510
holes deeper than 12" (305mm) (8.128mm), a diamond depth of .250" (6.350mm) reinforcement. They have a total segment height
Strap wrench, 18" (457mm) allows and a segment base of .070 (1.778mm). The stan- of .400" (10.160mm) (.300" (7.620mm) diamond
bit removal from drill spindle without HR-2514 dard bit length is 13" (330.200mm) and the inte- depth and .100 (2.54mm) segment base. The
damage to bit barrel gral thread adapter is 1.25"– 7 thread. standard bit length is 13" (330.200mm) and the
Concrete drill bits are for critically hard concrete integral thread adapter is 1.25"– 7 thread.
Angle drilling attachment for HR-2500.
Tilts column to allow drilling from 90° to HR-2515 with heavy, steel reinforcement. Asphalt drill bits Size
45° angle from surface are for asphalt and concrete with soft, abrasive Medium***
aggregate. Inches mm
Portable water pressure tank. Hand-op-
1/2 13 HR-2570.5
erated. 4 gallon (15 liter), delivers water Size For For
HR-2516 5/8 17 HR-2570.625
under pressure when water supply is In. mm Asphalt Concrete
not available. 1 25 HR-2550.1 HR-2530.1 3/4 19 HR-2570.75
Water trapping assembly, confines 1.125 29 HR-2550.1125 HR-2530.1125 7/8 22 HR-2570.875
wastewater on surface and electric HR-2511 1.25 32 HR-2550.125 HR-2530.125 1 28 HR-2570.1
pump moves water into container
1.5 38 HR-2550.15 HR-2530.15
CoreSnap Removal Tool
Diamond bit edge dresser HR-2512 1.75 44 HR-2550.175 HR-2530.175 The CoreSnap allows you to remove a drilled sam-
Replacement wheel for diamond bit 1.875 63 HR-2550.1875 HR-2530.1875 ple from a roadbed at or below the tackline without
HR-2513
edge dresser (HR-2512) prying or drilling completely through the old road-
2 51 HR-2550.2 HR-2530.2
2.25 57 HR-2550.225 HR-2530.225 bed. The CoreSnap is placed down over a normally
ExitPoint Through-hole Drill Guide cut core and tighten the binding bolt with a 0.25"
Accurately detect exit points before drilling and 2.5 63 HR-2550.25 HR-2530.25
drive socket/ratchet. A quick lateral motion of the
coring with the ExitPoint through-hole drill guide. 2.75 70 HR-2550.275 HR-2530.275
handle breaks the core sample away from the older
The HR- is the easiest and fastest way to locate 3 76 HR-2550.3 HR-2530.3 mat beneath, allowing the core to be removed
a precise spot, without measuring, before you 3.5 89 HR-2550.35 HR-2530.35 easily.
start your project. Scans through most types of
4 100 HR-2550.4 HR-2530.4 CoreSnap Removal Tool, 4" HR-2554
non-magnetic building materials, such as wood, CoreSnap Removal Tool, 6" HR-2556
4.25 108 HR-2550.425 HR-2530.425
drywall, gypsum panels, bricks, and poured con- Ship wt. 10.4lbs. (4.7kg)
crete up, to 11.81 in. (300 mm) thick. 4.5 114 HR-2550.45 HR-2530.45
This simple, yet effective, tool saves time and 5 127 HR-2550.5 HR-2530.5
money by reducing guesswork, rework, unneces- 5.5 140 HR-2550.55 HR-2530.55
sary holes, and costly broken drill bits. Ideal for 6 152 HR-2550.6 HR-2530.6
cable and wire installations, concrete scanning, 6.25 159 HR-2550.625 HR-2530.625
and anytime through-hole drilling is required.
7 178 HR-2550.7 HR-2530.7
ExitPoint Through-hole Drill Guide HR-2599
8 203 HR-2550.8 HR-2530.8
Ship wt. 1.4lbs. (0.64kg)
9 230 HR-2550.9 HR-2530.9
10 254 HR-2550.10 HR-2530.10
11 280 HR-2550.11 HR-2530.11
12 305 HR-2550.12 HR-2530.12
13 330 HR-2550.13 HR-2530.13
14 350 HR-2550.14 HR-2530.14

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 283
PAVEMENT Benkelman Beam, High-Low Detect

H-2790

H-3221HA

Shown with H-3221HA

horizontal digital gauge H-3220A
and cover removed.

H-3222
Benkelman Beam Digital Indicator, Horizontal High-Low Detector (Rolling Straight Edge)
AASHTO T256 Horizontal-reading, digital indicator for use with Used to measure planeness of pavement surfaces,
The Benkelman beam measures the deflection of the H-3220A Benkelman beam. No more laying such as highways, airport runways, bridge decks,
a flexible pavement under moving wheel loads. on the ground to read a dial indicator. We've also etc. Requires only one operator to detect, register,
Extremely accurate and easy to use. Direct-reading redesigned the gauge cover on the beam, so that and dye mark high and low areas that need to be
dial indicator eliminates need for conversion tables you can now store the new horizontal digital indi- ground down or filled.
or field calculations. This pavement analysis tool cator mounted to the Benkelman beam, speeding Operator has full view of variations which are mag-
provides the following features: set up and keeping the gauge and beam together, nified 16 times, on a vertical scale graduated in
eliminating the chance of forgetting the gauge. 0.125" (1mm) increments, so that magnified read-
• Precision accuracy
Horizontal digital Indicator: 1.0" range x 0.001" ings range up to 0.25" (6.4mm), high or low. The
• Easy to use on test site
resolution. Designed for use with the Humboldt 16 ft. long model incorporates aluminum reinforc-
• Lightweight, quick set-up H-3220A Benkelman beam. The indicator's 2:1 ing riveted along both sides of the frame for added
• Easy to transport, easy to store logic ratio allows it to provide direct readings of support and rigidity. Frame is constructed of rect-
• No need for conversions or field calculations, benkelman beam results without manual computa- angular aluminum and wheels are provided, one
gauges are direct read. tions. Can be read in inches or metric units front and one rear with precision ball bearings and
Order dial gauge separately. Digital Indicator, Horizontal H-3221HA neoprene tires for support. Scraper blades keep
Ship wt. 2lbs. (0.9kg)
Dial indicator vibrator system assures accurate wheels clean to maximize accuracy. Includes wheel
pavement measurements. Telescoping design Dial Indicator, Vertical, 1" x 0.002" stands for stabilizing during calibration, transport
adds convenience, reduces weight, and saves stor- Vertical-reading, dial indicator for use with the and storage. There is provision for checking wheel
age space. Lightweight aluminum construction. H-3220A Benkelman beam. 1" range x 0.002" alignment. A steering handle is provided for easy
divisions positioning and movement, and provides a button
Specifications Dial Indicator, Vertical, 1" x 0.002" H-3222 for dye discharge. Marking dye is used to mark
Ship wt. 1lbs. (0.5kg) high and low areas on pavement. Dye can mount is
Aluminum with black finish
Main body Dial Indicator, Vertical, 25 x 0.02mm designed for 12 oz. (340g) aerosol cans.
55" (1397mm) long
Vertical-reading, dial indicator for use with the
8 ft. (2.4m) aluminum beam H-3220A Benkelman beam. 25mm range x
Probe beam H-2790: 166 lbs. (75.2kg)
telescopes into body
0.02mm divisions Shipping weight H-2791: 160 lbs. (100kg)
Provides lever ratio of 2:1, Dial Indicator, Vertical, 25 x 0.02mm H-3222M H-2792: 414 lbs. (72.5kg)
Probe fulcrum
ball pivot bearing Ship wt. 3lbs. (1.4kg)
High-Low Detector, 10 ft. (3m) Span H-2790
Assures measurement accu- Bell/Buzzer Indicator
High-Low Detector, 12 ft. (3.7m) Span H-2791
Vibrator racy. Top-mounted oper- Sounds simultaneously with visual indicator, 9V DC
High-Low Detector, 16 ft. (4.9m) Span H-2792
system ating switch for easy use. battery
Requires 4 "D" size batteries see table above
Bell/Buzzer Indicator H-2790B
Ship wt. 3lbs. (1.4kg) Bell/Buzzer Indicator
Ordered separately.
Dial indicators Provides audible alert, 9V DC battery
Adjusted for direct read
Bell/Buzzer Indicator H-2790B
Leveling wheel Elevation adjustment Ship wt. 3lbs. (1.4kg)

With beam fully extended Dye, Aerosol Can, 12-pack

Overall length
12 ft. (3.7m). 12 pack of 16oz. (454g) spray cans
Dye, Aerosol Can, 12-pack H-2790D
Benkelman Beam H-3220A DG Ship wt. 12lbs. (5.4kg)
Ship wt. 62lbs. (28kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

284
Skid Resistance, Polishing PAVEMENT

Shown with H-3206

Base Plate, not
included

H-3204

H-3205.3F

Accelerated Polishing Machine • Easily removed covers and guards protect oper- affixed to the pendulum arm measures the high-
BS 812 Pt 114 EN 1097-8 ator during testing and safety switch ensures est point in the pendulum arc. The position of the
The accelerated polishing machine polishes sam- removable safety covers are in place. pointer is then read on a measuring arc graduated
ples of aggregates, simulating actual road condi- • Comes with four molds and two mold plates. from 0 to 150. Pointer readings indicate the resis-
tions, and is used in conjunction with the portable tance to skidding of the test surface. Dimensions
Dimensions: 32"x 32"x 48" (82 x 82 x 123cm)
skid resistance tester to determine the polished (include carrying case): 31" x 25.5" x 9" (787 x 648
Accelerated Polishing Machine H-3205.3F
stone value for aggregates used in road surfaces, Ship wt. 463lbs. (210kg)
x 229mm).
and gives a measure of the resistance to skid- Portable Skid Resistance Tester Portable Skid Resistance Tester H-3204
ding. Fourteen specimens are clamped around Ship wt. 88lbs. (39.9kg)
ASTM E303; BS EN 1097-8; BS 812 Pt 114
the “road wheel” of the polishing machine, and
Measures friction (skid resistance) on flat, cam-
subjected to two stages of polishing by a loaded H-3204 Accessories Model
bered, or gradient road surfaces. Originally devel-
rubber tire. First by corn emery, and secondly Rubber slider, 1.25", for lab use H-3207
oped by the Transport and Road Research Labora-
by emery flour. Use of the accelerated polish-
tory of Great Britain. Rubber slider, 3", for field use H-3208
ing machine and the skid resistance tester in
road construction has had a major influence in • Compact, easily transported and used in the Laboratory base plate H-3206
reduction of accidents. field

The H-3205 features: • Can be used in remote locations, independent

of any vehicle
• Heavy welded steel mainframe, standing in
adjustable pads • Enclosed bearings & working parts for protec-
tion against wear and contamination
• Digital display preset timer and revolution
counter. • Heavy-duty frame construction

• Specimens are easily affixed and removed from • Adjustable feet on base
testing wheel A pendulum arm, having a spring-loaded rubber
• Water gravity fed from high level tank through slider on the pendulum foot. Device is placed on
calibrated flowmeter. the portion of the road surface to be tested. It is
then leveled, and the height of the center of sus-
• Used abrasive and water collected in removable
pension of the pendulum is adjusted to a fixed
tray.
value which is read on a special gauge.
• Loaded tire raised and lowered to the running
The pendulum is then released from its horizon-
surface by mechanical lifting device.
tal position, to swing down freely until the rubber
slider contacts the test surface. As the slider travels
across the surface for a fixed distance, the pendu-
lum is slowed and a frictionally-constrained pointer

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 285
PAVEMENT Asphalt Permeameter

HM-9113.1

HM-9110
HM-9111

Asphalt Permeameter NCAT Field Permeameter Kit NCAT Field Permeameter (Permeameter Only)
These asphalt permeameters are compact, The NCAT field permeameter kit is a falling-head The NCAT field permeameter is for those who
self-contained, easy-to-use units, which can be permeameter using Darcy’s law to determine rate don't wish to buy the complete kit or who need to
used in the lab or in the field. They are used to of water flow through asphalt pavement. This replace an existing one. This field permeameter is
test the permeability of a compacted asphalt pav- design was selected by the National Center for the same permeameter used in the HM-9113 kit.
ing mixture by using the falling head method to Asphalt Technology (NCAT) for its close correla- The HM-9113.1 permeameter is supplied in two
determine hydraulic conductivity of saturated 4" tion with laboratory test results. Testing and sub- sections and constructed of rugged plastic. In use,
or 6" samples. To use, place the specimen inside sequent calculations can usually be completed in sealing material is placed on the base plate and the
the metal cylinder, where it is held in place by a 10-15 minutes by one technician. unit seated against the pavement using gentle foot
latex membrane. The unit is then pressurized by The HM-9113.1 permeameter is a supplied in two pressure and included base weights. After filling
the built in hand pump. The expanding membrane sections and constructed of rugged plastic. In use, with water, outflow is observed using the clearly
pushes against the outer edge of the sample, fill- sealing material is placed on the base plate and the marked graduations. The smallest, uppermost tier
ing in voids and preventing flow down the side of unit seated against the pavement using gentle foot allows rapid determinations in low-porosity pave-
the core. The sample is then saturated from the pressure and included base weights. After filling ments. The larger diameter tiers are used to accu-
bottom, and 500cc of water is allowed to flow with water, outflow is observed using the clearly rately read flow on more porous pavements.
through the sample while being timed. Both per- marked graduations. The smallest, uppermost NCAT Field Permeameter HM-9113.1
meameters include a 500cc manometer with 15 ft tier allows rapid determinations in low-porosity Ship wt. 14lbs. (6.3kg)
of 0.25" OD water line, built-in hand pump and a pavements. The larger diameter tiers are used to
pressure gauge. accurately read flow on more porous pavements.
Asphalt Permeameter, 4" HM-9110 The alternate top section can be used to replace
Asphalt Permeameter, 6" HM-9111 the two top tiers with one larger diameter tier. This
Ship wt. 20lbs. (9kg) allows for extended test times on moderately per-
meable mats or for rapid filling when testing highly
Asphalt Permeater Parts Model permeable mixes. The NCAT field permeameter
4" Membranes HM-9110.2 kit provides the user with a complete operation
package for using the NCAT field permeameter.
6" Membranes HM-9111.2
It includes the 4-tiered HM-9113.1 permeameter;
4" O-rings HM-9110.1 an alternate graduated top section; a filling tube;
6" O-rings HM-9111.1 moldable sealant for sealing the permeameter to
its base; a whisk broom for test site preparation
and (4) 5lb (2.3kg) base weights to help seal the
permeameter to the test surface.
NCAT Field Permeameter Kit HM-9113
Ship wt. 49lbs. (22.2kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

Balance Calibration Weights . . . . . . . . . .
LABORATORY
. . 313 Ovens, Bench . . . . . . . . . . . . . . . 316-319
Beakers & Cylinders . . . . . . . . . . . . . 322, 326 Ovens, Lab . . . . . . . . . . . . . . . . 314-315
Bowls . . . . . . . . . . . . . . . . . . . . Ê325 Pans . . . . . . . . . . . . . . . . . . 324-325
Brushes . . . . . . . . . . . . . . . . . . . 331 pH Meters . . . . . . . . . . . . . . . . . . 299
Calipers . . . . . . . . . . . . . . . . . . . 333 Thermometers, Digital . . . . . . . . . . . . 288-296
Crucibles . . . . . . . . . . . . . . . . . . . 326 Thermometers . . . . . . . . . . . . . . . 288,298
Dessicator . . . . . . . . . . . . . . . . . . 327 Thermometers, Mercury-Free. . . . . . . . . . . . 296
Dishes. . . . . . . . . . . . . . . . . . 326-327 Thermometers, ASTM Mercury . . . . . . . . . . . 297
Flasks and Dispensers . . . . . . . . . . . . . . 323 Timers. . . . . . . . . . . . . . . . . . . . 298
Furnaces . . . . . . . . . . . . . . . . . . . Ê320 Scales & Balances Comparison Chart . . . . . . . 300-301
Gauges, Indicators . . . . . . . . . . . . . . . 334 Scales & Balances. . . . . . . . . . . . . . 300-314
Gloves . . . . . . . . . . . . . . . . . . . 332 Scoops . . . . . . . . . . . . . . . . . 324,328
Hammers & Chisels . . . . . . . . . . . . . . . 330 Shovels . . . . . . . . . . . . . . . . . . . 332
Hot Plates . . . . . . . . . . . . . . . . . . 321 Straight Edge . . . . . . . . . . . . . . . . . 331
Jars. . . . . . . . . . . . . . . . . . . . . 327 Trowels . . . . . . . . . . . . . . . . . . . 329
Mortar & Pestle . . . . . . . . . . . . . . . . 333
288
Thermometers, Digital LABORATORY

HT-4795 HT-4796
Shown with Probe, Shown with Probe,
not included not included HT-4797 HT-4798

Model HT-4795 HT-4796 & HT-4796-2 HT-4797 HT-4798

Pt100 Platinum Precision, hand- Pt100 Platinum Precision, hand- Dual Probe–Thermocouple Single Probe–Thermocouple
Type
held calibration thermometer held thermometer High-Precision Digital Thermometer High-Precision Digital Thermometer
High Precision Accuracy,
2-channel measurement, USB interface; High measuring accuracy; Integrated calibration function for simple compensation of sensor
Features Max./Min., USB Interface, tolerances; Measuring channels are freely assignable; Recording maximum, minimum, hold and average
Data Logger function for up to values; Integrated sensor holder for one hand operation
6000 measurements
Probe Dual-probes, order separately order probes separately Dual-probes, order separately Single-probe, order separately
-328° to 1562°F -328° to 1562°F
Range -200°C to +1370°C -200°C to +1370°C
-200° to +850°C -200° to +850°C
0.001°C from -200°C 0.01°C from -200°C
Resolution to +200°C to +200°C 0.01°C & °F 0.01°C & °F
remaining range 0.01°C remaining range 0.1°C
±0.015°C from -50°C to +199.99°C ±0.03°C from -50°C to +199.99°C ±0.2°C from -40°C to +200°C ±0.2°C from -40°C to +200°C
Accuracy
±0.025% of reading for the ±0.05% from -200°C to +200°C ±0.5°C from +201°C to ±0.5°C from +201°C to
(Type K)
remaining range otherwise 0.05% of reading +1000°C otherwise 1.0°C +1000°C otherwise 1.0°C
Stem
Various
Length
Power 9v battery
Traceable
NIST Traceable Certificate available
Certificate

Thermometer, High-Precision, Calibration Thermometer, Precision, Calibration Thermometer, Precision

The HT-4795 precision hand-held thermometer The HT-4796 and HT-4796-2 Hand-held The HT-4797 and HT-4798 Digital Thermocouple
is a 2-channel instrument that has a resolution of Thermometers are high-precision, metrology- Thermometers are an economically-priced
0.001°C with a system accuracy of ± 0.015K. It grade, NIST-traceable instruments. These solution for precision measurements of a wide
provides an excellent calibration reference for your high-accuracy thermometers are used when range of temperature measuring needs. By
other thermometers. Simultaneous display of two temperature measurement are critical and/or when using thermocouple types J, K, L, N, T a range
measured values or differential. Records minimum, online documentation is required. The HT-4796 of -200°C to +1370°C (-328°F to 2498°F) can be
maximum, hold and average values. Integrated and HT-4796-2 can also used as a NIST Standard obtained. These instruments can be used in a
calibration function (according to EN60751 up to verify and calibrate routinely used instruments. wide variety of applications. Features include:
to 14 points) Password protected calibration Optional DE-Graph Windows Software for USB interface; High measuring accuracy;
function. Optional DE-Graph Windows Software graphic and tabular documentation. Features Integrated calibration function for simple
for graphic and tabular documentation. For include: High-accuracy; USB interface; Records compensation of sensor tolerances; Measuring
3-point calibration certification, order HT-4795C. maximum, minimum, hold and average values, channels are freely assignable, Recording
Thermocouple probe not included. Measuring channels are freely assignable and maximum, minimum, hold and average values and
Thermometer, Precision HT-4795 integrated sensor holder for one hand operation Integrated sensor holder for one hand operation.
Thermometer, Precision, 3 Pt. Cal. HT-4795C Thermocouple probe not included. Thermocouple probe not included.
Thermocouple Probe, 6" HT-4795.1 Thermometer, Precision, 1-channel HT-4796 Thermometer, Precision, 1-channel HT-4797
Thermocouple Probe, 12" HT-4795.2 Thermometer, Precision, 3 Pt. Cal. HT-4796C Thermometer, Precision, 3 Pt. Cal. HT-4797C
Ship wt. 1.3lbs. (0.6kg)
Thermometer, Precision, 2-channels HT-4796-2 Thermometer, Precision, 2-channels HT-4798
Thermometer, Precision, 3 Pt. Cal. HT-4796-2C Thermometer, Precision, 3 Pt. Cal. HT-4798C
Thermocouple Probe, 6" HT-4795.1 Ship wt. 2lbs. (0.9kg)
Thermocouple Probe, 12" HT-4795.2
Ship wt. 2lbs. (0.9kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 289
LABORATORY Thermometers, Digital

HT-4015
HT-4794 HT-4793
HT-4132

Model HT-4794 HT-4793 HT-4132 HT-4015

Total-range,rough-Use
Pt100 Platinum Thermometer, Thermocouple, accepts 2 K RTD platinum thermometer with
Type thermometer with traceable
accepts Pt100 ohm probes probes traceable certificate
certificate
F & C switchable. Min-Max, F & C switchable,
Hold Functions, 19 temperature Min-Max, Hold, Average Values Memories, alarms, timer and
°F and °C switchable, one-but-
memory function, Calibration Functions, 10 temperature min/max capabilities, backlit dis-
ton operation, low-battery, bad
Features Function, RS232 Interface, memory function, Timer, High & play, protective casing with flip-
probe indicator, 0.5" high digits,
Optional Windows Software, Low Alarm, Back light, PVC Pro- out Stand, °F and °C switchable,
computer output capability
Stores 16 Temperature Measure- tective Casing, Flip Out Stand 0.625" high digits, hold button
ments
Platinum, (100-ohm) 4-wire Supplied with 4', fast-response
Pt 100 Platinum probe,
Probe Dual-probes, order separately probe for use with soils, liquids, beaded probe, uses all type K
order separately
air/gas probes
-200° to 1370°C/-328° -58 to 752°F -328 to 2498°F
Range -100° to 850°C/-148° to 1562°F
to 2498°F -50 to 400°C -200 to 1370°C
0.1º C&F. -100 to 399.9°C 0.01° below 200°C and 0.1°
Resolution 0.1° 0.1°/1°
Otherwise 1.0°C above 200°C
±1.0°C/1.8°F from -49° to
Accuracy +740°C & -52° to 1364°F 0.1% + 0.2°C below 200°C and ±1°C from -50° to 740°C (-328
±0.3°C (0.7°F)
(Type K) ±2.0°C/4.0°F Below & Above ± 0.15% + 0.5°C above 200°C to 1364°F) otherwise ±2°C

Stem
— — 6 inches cable length 4'
Length
9-volt battery
Power 2 AA Batteries. 3 AAA Batteries (3) AAA batteries
(AC adapter available)
Traceable ISO 17025/IEC Traceable ISO 17025/IEC Traceable
Yes, included Yes, included
Certificate Certificate included Certificate included.

Thermometer, Pt100 Platinum 59 min to 1 min. Low battery indicator and back Thermometer, Total Range, Traceable
Handy, Robust temperature instrument has 4-wire lit screen. Includes PVC boot for protection and One of the fastest reading and technically
technology for Pt100. Min/Max and Hold function. flip-out stand. advanced thermometers available. Unit is
Integrated probe holder for one hand operation. Thermometer, Dual K Probe, NIST HT-4793 constructed for rugged applications and provides
The HT-4794 provides °F and °C switchable Ship wt. 2lbs. (0.9kg) the use of all type-K probes. It also provides min/
readings and an RS232 connection interface. Thermometer, RTD Platinum, Traceable max capabilities, a 24-hour timer, alarms and a
Stores 16 temperature measurements. Includes a One button operation, great for QC and memory function.
calibration function. processes. Platinum (100-ohm) 4-wire probe. Has Thermometer, Total Range, Traceable HT-4015
Ship wt. 1.3lbs. (0.6kg)
Thermometer, Pt100 Platinum HT-4794 low battery/bad probe indicator and can be output
Ship wt. 2lbs. (0.9kg) to a computer. See page 278 for data acquisition
Thermometer, Dual-K Probe, NIST Traceable software and cable. See Probes and Accessories
NIST Traceable Digital “K” Thermocouple Thermometer, RTD Platinum, Traceable HT-4132 on Page 294
Thermometer with 10 memeory storage. Ship wt. 1.5lbs. (0.7kg)

Recallable Min/Max function and high-low audi-

ble alarm function. Count up timers from 23hr

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

290
Thermometers, Digital LABORATORY

See Probes and Accessories

on Page 294

H-3558D H-3564

Model H-3558D H-3564

Dual input, digital Dual input, digital
Type
thermometer kit thermometer kit
(1) Standard K-Probe, Push Button Opera-
(2) SureGrip Piercing Probes, (4) bead
tion, °F/°C Selectable, Min/Max
Features probes
temperature display,
and Case
hold function
Probe Type-K Type-K, J, T, E
-58 to 2000°F -58 to 2000°F
Range
Computer Data Acquisition Software -50 to 1093°C -50 to 1093°C
Powerful and easy-to-use computer data capture
0.1 °C/°F/K <1000
program for HT-4132 digital thermometers. The Resolution 1°F/C
and 1 °C/°F/K >1000
software allows connecting up to eight instruments
all running simultaneously on one computer. The ±0.3% +2°F (1°C)
Accuracy above -100°C: J, K, T, E-type: 0.05%
software captures data in the background, tech from 32 to 2000°F (1093°C)
(Type K) below -100°C: ± 0.3°C
for other tasks. Records interval readings from 1 ±4°F (2°C) from -58 to 32°F (-50 to 0°C)
to 10,000 seconds; displays minimum/maximum Stem
Various Various
readings; and utilizes an alarm mode that permits Length
the user to be notified visually, audibly, and by (3) AA batteries or
email when an alarm is triggered. Unlimited Power (3) AA batteries
optional AC adapter
readings are saved to a file that can be viewed and
Traceable
printed as is, or printed in any report or spreadsheet order: H-3558D-C order: H-3564C
Certificate
format. Networking server/client capability allows
the captured data to be monitored on a remote
Thermometer Kit, Digital, Hand-held
workstation. Readings may be streamed to cell
Heavy-duty design with 3.5"-digit LCD display.
phones or anywhere via email every minute or in
Range from -58 to 2000°F (-50 to 1093°C).
any time interval. 24/7 notification of audible/
Resolution is 1° F/C. Accuracy is ±0.3% +2°F
visual alarms are sent to user’s computer, remote
(1°C) from 32 to 2000°F (1093°C) and ±4°F (2°C)
computer, via email anywhere, and by email to cell
from -58 to 32°F (-50 to 0°C). Dual-input jacks for
phones. Program automatically installs in less than
K thermocouples allow operator to monitor two
two minutes. Absolutely no user programming,
locations. Other features include hold button, max
no user keystrokes, no user entries are required.
temperature display and max memory. Supplied
Simply connect the cable to the instrument and
complete with removable rubber boot and one
to a USB port (or serial port) and data is captured.
Data Logger for HT-4132 Thermometer type-K 3.5" (89mm) stainless steel probe w/handle
Operation is straight forward plug and play. It is
Complete DAS–4™ System captures and stores up and 2 K wire probes.
that easy. It is designed to work with Windows® 98/
Me/NT/2000/XP/Vista/Windows 7. Includes a CD, to 8000 bytes (over 1000 readings). Great for those Thermometer Kit, Digital, Hand-held H-3558D
Ship wt. 1.4lbs. (.63kg)
a 6-foot cable (supplied USB, serial, and instrument who want to capture field readings and upload
connections) cable plugs into the instrument and to computer. Readings may be taken at intervals Thermometer Kit, Digital, Hand-held
computer. Multiple accessory extension cables from 1 second to 99 hours. Stored readings may Laboratory accuracy and fast response in a rugged
expand cable length to 300 feet. be downloaded to any PC and viewed. Includes dual-input contact thermometer. Operating range:
Windows CD, a 3-foot cable (supplied USB, -58 to 2000°F (-50 to 1093°C). Kit includes the
Data Acquisition Software for HT-4132 HT-4136
Ship wt. 5lbs. (2.2kg)
serial, and instrument connections). Cable plugs Fluke 52II thermometer, (4) general purpose bead
into instrument and computer. Four AA alkaline probes and (2) SureGrip™ piercing probes and a
batteries supplied. case. Can use K, J, T and E probes.
Data Logger for HT-4132 Thermometer HT-4325 Thermometer Kit, Digital, Hand-held H-3564
Ship wt. 3lbs. (1.3kg) Ship wt. 4.6lbs. (2.1kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 291
LABORATORY Thermometers, Digital, IR

H-3593A

H-3595A

H-3599

H-3590 H-3591 H-3597A

Model H-3590 H-3591 H-3597A H-3593A H-3599 H-3595A

Type Infrared Infrared Infrared Infrared Infrared Infrared
Probe none none none none One type-K none
IR gun: -76 to 932°F
-25 to 999°F -58 to 1832°F -76°F to 1832°F, -58 to 1022°F (-60 to 500°C) -20 to 932°F
Range
(-320 to 535°C) (-50 to 1000°C) -60°C to 1000°C (-50 to 550°C) probe: -76 to 1999°F -30 to 500°C
(-60 to 1400°C)

The greater of: The greater of: ±1°C (2°F) from

±1% of reading ±1.5% of reading IR: 15-35°C: ±1°C, 50°F to 86°F
15-35°C: ±1°C,
Accuracy or ±2°F (±1°C), 0.1° to 200°C or ±2.7°F (±1.5°C), full range: ±2%, 2°C (10°C to 30°C),
full range: ±2%, 2°C
at 73°F (23°C) at 73°F (23°C) probe: ±0.8%, 1°C ± 1.5% or
ambient temp. ambient temp. ± 1.5°C (3°F)

±0.5% of reading or ±1.5% +2°C ±1.5% of reading ±0.5% of reading

0.15°C at 25°C, 0.15°C at 25°C,
Repeatability ±2°F (±1°C), between -76°F to 1832°F or < ±1°C (±2°F)
0.75°C at 80°C 0.75°C at 80°C
whichever is greater -20 to 200°C (-60°C to 1000°C) whichever is greater

Optics 12:1 50:1 50:1 12:1 11:1 10:1

Target Size 1" target dia. at 12" 1" target dia. at 50" 1" target dia. at 50" 1" target dia. at 12" 1" target dia. at 11" 1" target dia. at 10"
Dual-Laser shows target

Traceable
order: H-3590C included order: H-3597C order: H-3593C order: H-3599C order: H-3595AC
Certificate
Power 9 volt 9 volt (2) AAA 9 volt AAA 9 volt

Thermometer, IR Gun, Heavy-Duty Thermometer, Pro IR Gun, Infrared Thermometer, IR Gun, K Thermocouple Combo
Hand held and portable, the H-3590 infrared The professional IR thermometer is packed full of Infrared and type K thermocouple combo gun.
thermometer stand up to the day-to-day usage the features you need to make accurate infrared High-quality 11:1 optics with laser pointer. Fast
professionals require of their equipment. Feature measurements. The H-3597A shows you exactly response type-K probe is included. You also get
backlit LCD and extra bright laser pointer, making it the size of your target every time. Its unique dual max, min, hold, diff, avg, hi/low alarm, backlit
more visible in all conditions, especially outdoors. laser design highlights the outer edges of your display and a °C/°F button.
Includes tripod mount, display hold (7 seconds) target eliminating any guesswork or calculations. IR Gun, K Thermocouple Combo H-3599
and is switchable between °F and °C. Uses 9V With a 50:1 target ratio you can be confident from Ship wt. 1.9lbs. (.86kg)
alkaline or NiCd battery, included. long distance. It includes data functions like min, Thermometer, Mini-Laser IR Gun, Infrared
Thermometer, Wide-range Memory H-3590 max, lock, and hi/low alarms. Includes ABS carrying Pocket size, high-quality infrared gun with high-
Ship wt. 3lbs. (1.4kg) case and two AAA batteries. quality 10:1 optics and laser pointer. Operation
Thermometer, Wide-Range IR Gun, Traceable Thermometer, Pro IR Gun, Infrared H-3597A is simple— aim, press trigger and read the backlit
Ship wt. 3lbs. (1.4kg)
Hand-held and portable, the H-3591 features 50:1 display. Reads °C or °F and has ergonomic grip
optics and a range of -58 to 1832°F (-50 to 1000°C). Thermometer, IR Gun, Infrared handle. Uses 9V alkaline of NiCd battery, included.
This thermometer features a traceable calibration Point and shoot simplicity. IR gun with high-qual- Thermometer, Mini-Laser IR Gun H-3595A
certificate, backlighting at the touch of a button, ity 12:1 optics and laser pointer. Reads °C or °F. Ship wt. 1.3lbs. (.59kg)

data hold, low battery indicator and °C/°F button. Thermometer, Wide-range Memory H-3593A
Thermometer, Wide-Range IR Gun H-3591 Ship wt. 1.2lbs. (.54kg)
Ship wt. 4lbs. (1.8kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

292
Thermometers, Accessories LABORATORY

H-3599.36

H-3564.3

H-3599.2

H-3564.2

HT-8613
HT-4028

H-3580.2

K-Probe, 8" K-Probe 5" High-Temperature Probe

Eight inch long, K thermocouple with 4.5" metal ASTM-E230-1993 Ten-foot-long 0.19-inch diameter braided metal
handle and 40" long coiled cable. Item is standard 5" stainless steel probe with 5 ft. PVC coiled cable wire cable with smooth tip measures –73 to 982°C
probe sold with H-3599 IR gun. Temperature range and Nylon handle. Measurement range: -418 to continuous or 1093°C short-term use. For use with
is: -76°F to 1999°F (-60°C to 1400°C), Accuracy is: 1650°F (-250 to 899°C). Compatible with K-type all type-K thermometers in liquids, air/gas, and
±0.8%, 1°C. Compatible with K-type measurement measurement instruments. semisolids
instruments. High-Temperature Probe HT-8613
K-Probe 5" H-3580.2
Ship wt. 0.6lbs. (.27kg)
K-Probe, 8" H-3599.2 Ship wt. 1lbs. (.45kg)
Ship wt. 1.4lbs. (.64kg)
K-Probe 4" AC Adapter for HT-4132
K-Probe 36" ASTM-E230-1993 AC adapter for use with HT-4132 data logging
Three foot long, K thermocouple is great for use thermometer shown on page 227
4" stainless steel probe with 40" (1m) cable.
in asphalt operations where you desire to know Measurement range: -40 to 662°F (-40 to 350°C). AC Adapter for HT-4132 HT-4132.2
material temperatures in hoppers, trucks, piles, etc. Ship wt. 1lbs. (.45kg)
Accuracy is ±3.96°F (2.2°C). Compatible with
Temperature range is: -30 to 1600°F. Heavy-duty K-type measurement instruments. Immersion Probes for HT-4797 & HT-4798
.250 dia. probe, 36” long with spring transition and Range Length x Dia. Model
K-Probe 4" H-3564.3
40" of lead wire with mini, type-K plug. Ship wt. 1.2lbs. (.54kg)
-40 to +752°F
K-Probe, 36" H-3599.36 120 x 3mm HT-4798.1
Bead Probe -40 to +400°C
Ship wt. 2lbs. (.91kg)
40" (1m) wire length with maximum continuous -148 to +2012°F
K-Probes temperature measurement: 500°F (260°C). 300 x 1.5mm HT-4798.2
100 to +1100°C
K thermocouples are great for use in asphalt Accuracy is: ±1.1°C (0-260°C). Fast response time.
operations where you desire to know material -148 to +2012°F
Not suitable for liquid immersion. Compatible with 300 x 3mm HT-4798.3
temperatures in hoppers, trucks, piles, etc. 100 to +1100°C
K-type measurement instruments.
Temperature range is: -30 to 1600°F. Heavy-duty
Bead Probe H-3564.2 Pt100 Platinum Immersion Probes for HT-4794
.250 dia. probe, 36” long with spring transition and Ship wt. 0.7lbs. (.32kg)
40" of lead wire with mini, type-K plug. Range Length x Dia. Model
Bead Probe, Fast Response
K-Probe, 12" H-3599.12 Fast-Response, Type-K thermocouple, beaded -58 to 662°F
150mm x 3mm HT-4794.1
K-Probe, 24" H-3599.24 probe. PTFE cable can withstand temperatures -50 to 350°C
Ship wt. 2lbs. (.91kg)
of –40 to 250°C continuous or 300°C short-term -58 to 662°F
150mm x 3mm HT-4794.2
use. Dimensions: 0.06-inch diameter probe with -50 to 350°C
cable length of 4 feet for use with all type-K -58 to 662°F
thermometers in liquids, air/gas, and semisolids. 300mm x 3mm HT-4794.3
50 to 350°C
Bead Probe, Fast Response HT-4028
Ship wt. 0.2lbs. (.009kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 293
LABORATORY Thermometers, Digital

H-2727D H-3557D HT-4142

HT-4105 H-3543 H-3560D

Temperature/Humidity Instrument- Min/Max Big Digit, Alarm Thermometer, Traceable Minimum/Maximum Thermometer
The H-2727D measures both temperature and % Large, 1.125" high digits display probe Wall or desk-mount minimum/maximum
relative humidity. It features min/max memory and temperatures and ambient temperatures, which thermometer with remote sensor. Sensor range is
switchable °F/°C. Temperature range is: 14° to can be seen from across a lab. This unique four- -58° to 158°F (-50° to 70°C). Switchable between°F
140°F / -10° to 60°C at ±2°F / ±1°C accuracy and alert thermometer provides precise monitoring of and °C. Indoor/outdoor capabilities: outdoor
0.1°F/C resolution. Measures 10 to 99% relative even the slightest changes in temperature. Range temperature range: -58 to 158°F (-50 to 70°C)
humidity at a resolution of 1.0% RH. Includes min/ is: -58 to 158°F or -50 to 70°C with a resolution of Indoor temperature range: 32 to 122°F (0 to 50°C),
max memory capability. Uses (1) AAA battery. 0.1° and an accuracy of ±1°C. Front panel controls temperature accuracy: ±2°F/±1°C, sensor cord
Temperature/Humidity, Min/Max H-2727D are easy-to-set. Alarms can be set to activate at a length: 120" (304cm). Battery: 1 alkaline 1.5V,
Ship wt. 0.8lbs. (.36kg) temperature above, or below a setting or, between AAA.
Digital Thermo-Timer or outside two settings. Comes with traceable Minimum/Maximum Thermometer H-3543
Versatile, 24-hour lab timer for use with ovens, certificate of calibration. Ship wt. 1.6lbs. (.72kg)

incubators and other environmental chambers. Big Digit, Alarm Thermometer °F HT-4142 Maximum and Minimum Thermometer
Includes probe with 48" (1.2mm) long cable. Big Digit, Alarm Thermometer °C HT-4143 Dual-scale thermometer has u-shaped capillary
Ship wt. 0.8lbs. (.36kg)
Probe may be placed inside oven door for internal mounted in plastic 8" x 2.625" x 1" (203 x 67 x
chamber temperature monitoring. Monitors and Digital Indoor/Outdoor Thermometer °F 25mm) with guard and mounting tab. Ranges:
displays temperatures over a 0 to 200°C range at an Thermometer displays current, minimum, and -20°F to 140°F in 2°F div. and -30°C to 60°C in
accuracy of ±2°C. Time and temperature functions maximum temperatures. Most importantly, it 1°C div. thermometer indicates present, highest
may be used separately or simultaneously. Alarm captures and shows the exact time and date when and lowest temperature since last indices setting.
sounds when programmed time or temperature the minimum and maximum temperature occurred. Indices are easily reset after each reading.
high limits are reached. Display shows remaining Ideal for monitoring solutions, refrigerators, and Maximum and Minimum Thermometer H-3560D
time/temperature/high limit set points. Magnet room temperature. Range is –40.0 to 176.0°F Ship wt. 0.5lbs. (.22kg)
permits mounting on side of oven. Uses AAA and –40.0 to 80.0°C with a resolution of 0.5° and
battery, not included. accuracy of ±1.5°C. Display’s 0.375"-high digits
Digital Thermo-Timer H-3557D show min/max of probe temperature or ambient
Ship wt. 1lbs. (.45kg)
temperature, time-of-day, and month/day. Wire
Digital Thermo-Timer Probe mounting bracket permits easy probe placement.
Replacement probe for H-3557D thermo-timer. Sensor and 6-foot cable perform accurately even
when both are under water. Comes with traceable
Digital Thermo-Timer Probe H-3557D-P
Ship wt. 0.2lbs. (.09kg) certificate of calibration.
Digital In/Out Thermometer °F HT-4105
Ship wt. 0.8lbs. (.36kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

294
Thermometers, Digital, Stem LABORATORY
HT-4052
HT-4052U

HT-4353
HT-4353U

H-3541D H-3538D
HT-4149
HT-4149U

HT-4050
HT-4050U

HT-4049
HT-4049U
HT-4039
HT-4039U

Model No. Description Range Accuracy Stem Length Overall Ship Wt. Features
Long-stem, –58 to 302°F ±2.0°F 0.8 lb. Traceable calibration
HT-4052 8" 11"
digital thermometer –50 to 150°C ±1.0°C .36 kg certificate

Long-stem, –58 to 302°F 1.6 lb. Traceable calibration

HT-4052U ± 0.2°C 8" 11"
digital thermometer –50 to 150°C .72 kg certificate

Long-stem, –58 to 572°F ±2.0°F .5 lb. Traceable calibration

HT-4353 11.375" 14.375"
digital thermometer –50 to 300°C ±1.0°C .22 kg certificate

Longer-stem, –58 to 572°F 1.1 lb. Traceable calibration

HT-4353U ± 0.5°C 11.375" 14.375"
digital thermometer –50 to 300°C .50 kg certificate

Long-stem, multi-angle –58 to 536°F ±2.0°F 1.0 lb. Traceable calibration

HT-4149 8" 10"
digital thermometer –50 to 280°C ±1.0°C .45 kg certificate

Long-stem, multi-angle –58 to 536°F 0.8 lb. Traceable calibration

HT-4149U ± 0.4°C 8" 10"
digital thermometer –50 to 280°C .36 kg certificate

Digital, pocket 0.45 lb. Traceable calibration

HT-4050 –58 to 572°F ± 1.5°C 3.5" 7"
thermometer w/sheath .20 kg certificate, hold button

Digital, pocket 0.3 lb. Traceable calibration

HT-4050U –50 to 300°C ± 0.4°C 3.5" 7"
thermometer w/sheath .13 kg certificate, hold button

Digital, jumbo display –58 to 302°F ±2.0°F 0.45 lb. Traceable calibration
HT-4049 5.25" 6.5"
thermometer –50 to 150°C ±1.0°C .20 kg certificate

Digital, jumbo display –58 to 302°F 0.8 lb. Traceable calibration

HT-4049U ± 0.3°C 5.25" 6.5"
thermometer –50 to 150°C .36 kg certificate
Traceable calibration
Digital, waterproof –58 to 572°F ±2.0°F 10ft. 0.6 lb.
HT-4039 4.75" certificate, min/max,
min/max thermometer –50 to 300°C ±1.0°C cable .27 kg
waterproof
Traceable calibration
Digital, waterproof –58 to 572°F 10ft. 0.8 lb.
HT-4039U ± 0.5°C 4.75" certificate, min/max,
min/max thermometer –50 to 300°C cable .36 kg
waterproof
Digital, waterproof -40° to 450°F ±2.0°F 0.8 lb. Field calibratable
H-3538D 5" 6"
calibratable thermometer -40° to 232°C ±1.0°C .36 kg waterproof. max temp.

Digital, waterproof -40 to 450°F ±2.0°F 0.4 lb. Field calibratable

H-3541D 5" 6.25"
calibratable thermometer -40 to 232°C ±1.0°C .2 kg waterproof. max temp.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 295
LABORATORY Thermometers

H-3547

H-2639 H-3550

H-3542A

H-2634D H-3540

H-2612

Dial Thermometers, Pocket-Type Thermometers, Dual-Scale General Testing

Ship Ship
Model Description Range Divisions Model Description Range Divisions
Wt. Wt.
1" dial, 5” long stem, includes 25 to 0.45 lb. Direct-reading, all-metal dial 25 to 125°F 1°F
H-2633 1°F H-2631D
plastic pocket case and clip. 125°F .20 kg thermometers for gener- 0 to 50°C .5°C
0.25 lb. al use include °F and °C
1" dial, 5” long stem, includes 50 to
H-2639 5°F scales. Units have bi-metal 0 to 220°F 2°F
plastic pocket case and clip. 550°F .11 kg H-2632D element that actuates -10 to 100°C 1°C
1" dial, 5” long stem, includes 0.7 lb.
-40 to 0.2 lb. pointer over graduated dial.
H-3550 plastic pocket case w/ calibra- 2°F .23 kg
180°F .09 kg Stainless steel stem is 8"
tion tool. long x 0.15" (203 x 4mm).
50 to 500°F 5°F
1" dial, 5” long stem, includes H-2634D Dial face is 1-3/4" (45mm)
0 to 0.7 lb. 0 to 260°C 2°C
H-3552 plastic pocket case w/ calibra- 2°F dia. external adjustment
220°F .32 kg allows recalibration.
tion tool.
1" dial, 5” long stem, includes 0 to 0.7 lb. Thermometers, General Purpose Mercury Fahrenheit
H-3553 2°C
plastic pocket case and clip. 150°C .32 kg
1" dial, 5” long stem, includes 0 to 0.7 lb. Model Range Div. Length Ship Wt.
H-3554 5°C
plastic pocket case and clip. 250°C .32 kg
H-2611 -30 to 120°F 1°F 12" (305mm)
H-2613 0 to 230°F 2°F 12" (305mm)
1.5 lb.
H-2615 0 to 300°F 2°F 12" (305mm)
Stick Thermometers, Pocket-Type .09 kg
H-2617 20 to 500°F 2°F 16" (405mm)
Ship
Model Description Range Divisions H-2619 20 to 750°F 5°F 16" (405mm)
Wt.
5" long stem. Non-toxic Thermometers, General Purpose Mercury, Celsius
liquid thermometer, Features 0 to 0.2 lb.
H-3547 copper-plated bulb to resist 1°F Model Range Div. Length Ship Wt.
cutting, includes metal pock- 120°F .09kg
et case and clip
H-2612 -35 to 50°C 1°C 305mm (12")
5" long stem. Non-toxic liq- -10 to 0.7 lb.
H-3542A uid thermometer, includes 1°C H-2614 -20 to 110°C 1°C 305mm (12")
metal pocket case and clip. 110°C .32 kg 1.1 lb.
H-2616 -20 to 150°C 1°C 305mm (12")
5" long stem. Large-bore, .36 kg
tempered glass with non-tox- 0 to 0.05 lb. H-2618 -10 to 260°C 1°C 405mm (16")
H-3540 2°F
ic liquid, includes plastic 220°F .02 kg H-2620 -10 to 400°C 2°C 405mm (16")
pocket case and clip.

CAUTION

*
Some of these thermometers contain mercury. There are
restrictions on their sale and shipment. Please check laws in your area or contact
us before ordering. Due to Illinois law, Humboldt must drop-ship these items
from New Jersey. Mercury Thermometers require ground shipment in the U.S.
International and air shipments ship as Dangerous Goods.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

296
Thermometers, Mercury-Free LABORATORY

Thermometers, Mercury-Free, Blue-Spirit Certified Non-Mercury, ASTM-Approved Thermometers, Mercury-Free, Blue-Spirit

These Thermometers are calibrated against NlST Precision Thermometers These Thermometers provide a mercury-free
standards and comes with a calibration document Range Div. ASTM Model alternative to mercury thermometers. They provide
showing corrections to the nearest tenth of a scale the same performance as a mercury thermometer,
-38 to +2°C 0.1°C 62C H-2605.62C
division traceable to NIST These thermometers but use a blue liquid formula, which is nontoxic
-36 to +35°F 0.2°F 62F H-2605.62F
meet with all prescribed ASTM requirements. Each non-caustic, nonhazardous and biodegradable.
incorporates the ice point when not on scale (0 -8 to +32°C 0.1°C 63C H-2605.63C These thermometers use many of the same scales
or 32°F) as a reference point enabling the user to +18 to 89°F 0.2°F 63F H-2605.63F as ASTM mercury thermometers, but currently are
validate and update the calibration document to +25 to 55°C 0.1°C 64C H-2605.64C not ASTM Compliant.
insure accurate temperature measurements over +77 to 131°F 0.2°F 64F H-2605.64F
Range Div. Model
the life of the thermometers. +50 to 80°C 0.1°C 65C H-2605.65C -20 to 150°C 1.0°C H-2604.1C
• Each thermometer is calibrated against NlST +122 to 176°F 0.2°F 65F H-2605.65F -38 to 50°C 1.0°C H-2604.5C
Standards
+75 to 105°C 0.1°C 66C H-2605.66C -5 to 110°C 0.5°C H-2604.9C
• Certified at 5 temperatures with correction
+167 to 221°F 0.2°F 66F H-2605.66F +38 to 82°C 0.1°C H-2604.14C
factors
+95 to 155°C 0.2°C 67C H-2605.67C -2 to 80°C 0.2°C H-2604.15C
• Traceable calibration document Included
+206 to 311°F 0.5°F 67F H-2605.67F +30 to 200°C 0.2°C H-2604.16C
• Blue-Spirit range (-38 to 155°C) or (-36 to 311°F)
+72 to 126°C 1.0°C H-2604.17C
• Mercury Range (-38 to 405°C) or (-36 to 761°F) Non-Mercury, ASTM-Approved
Application Thermometers +49 to 57°C 0.1°C H-2604.19C
Range Div. ASTM Model Range Div. ASTM Model +57 to 65°C 0.1°C H-2604.20C
-36 to 35°F 0.2°F S62F H-2605.62FC -38 to 50°C 1.0°C 5C H-2605.5C +79 to 87°C 0.1°C H-2604.21C
-38 to 2°C 0.1°C S62C H-2605.62CC -36 to 120°F 2.0°F 5F H-2605.5F -38 to 42°C 0.2°C H-2604.33C
18 to 89°F 0.2°F S63F H-2605.63FC -20 to 102°C 0.2°C 12C H-2605.12C +25 to 105°C 0.2°C H-2604.34C
-8 to 32°C 0.1°C S63C H-2605.63CC -5 to 215°F 0.5°F 12F H-2605.12F -20 to 50°C 0.5°C H-2604.57C
77 to 131°F 0.2°F S64F H-2605.64FC -2 to +80°C 0.1°C 15C H-2605.15C -1 to 175°C 0.5°C H-2604.113C
25 to 55°C 0.1°C S64C H-2605.64CC 30 to 180°F 0.5°F 15F H-2605.15F 0 to 302°F 2.0°F H-2604.1F
122 to 176°F 0.2°F S65F H-2605.65FC 34 to 42°C 0.1°C 18C H-2605.18C -36 to 120°F 2.0°F H-2604.5F
50 to 80°C 0.1°C S65C H-2605.65CC 94 to 108°F 0.2°F 18F H-2605.18F +20 to 230°F 1.0°F H-2604.9F
167 to 221°F 0.2°F S66F H-2605.66FC 98 to 103°C 0.1°C 22C H-2605.22C +30 to 180°F 0.5°F H-2604.15F
75 to 105°C 0.1°C S66C H-2605.66CC 204 to 218°F 0.2°F 22F H-2605.22F +66 to 80°F 1.0°F H-2604.16F
206 to 311°F 0.5°F S67F H-2605.67FC 19 to 35°C 0.02°C 56C H-2605.56C +60 to 160°F 0.2°F H-2604.17F
95 to 155°C 0.2°C S67C H-2605.67CC 66 to 95°F 0.05°F 56F H-2605.56F +120 to 134°F 0.2°F H-2604.19F

-34 to 49°C 0.5°C 58C H-2605.58C +134 to 148°F 0.2°F H-2604.20F

Thermometers, Mercury-Free Certified See Table
Ship wt. .8lbs. (0.36kg) -30 to 120°F 1.0°F 58F H-2605.58F -36.5 to 107.5°F 0.5°F H-2604.33F

-18 to 82°C 0.5°C 59C H-2605.59C -4 to 122°F 1.0°F H-2604.57F

ASTM Thermometers, Mercury-Free, Blue-Spirit 0 to 180°F 1.0°F 59F H-2605.59F +30 to 350°F 1.0°F H-2604.113F
These Thermometers provide a mercury-free 20 to 50°C 0.1°C 91C H-2605.91C
alternative to ASTM mercury thermometers. They Thermometers, Mercury-Free See Table
18.9 to 25.1°C 0.01°C 116C H-2605.116C Ship wt. 0.8lbs. (0.36kg)
provide the same performance as a mercury
23.9 to 30.1°C 0.01°C 117C H-2605.117C
thermometer, but use a blue liquid formula,
which is nontoxic non-caustic, nonhazardous and 38.6 to 41.4°C 0.05°C 120C H-2605.120C Custom Calibration Thermometers
biodegradable; and, meet or exceed the ASTM -7 to 105°C 0.5°C 130C H-2605.130C Thermometers are available calibrated to any
E2251 specifications for accuracy and tolerance of three (3) points up to 300°F. Please contact us at
20 to 220°F 1.0°F 130F H-2605.130F
uncertainty. These thermometers are supplied with 1.800.544.7220 or 1.708.468.6300
a one-point certification in accordance with ASTM ASTM Thermometers, Mercury-Free See Table Cases for Thermometers
Ship wt. 1.0lbs. (0.36kg) Leatherette protective cases are available for all
E7 standards.
thermometers. To order, please add a "C" suffix
after the main model number, i.e.: H-2605C.5C.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 297
LABORATORY Thermometers, ASTM Mercury

PTFE-coated thermometers, which minimize

breakage hazards and improve safe
handling, are available. See PTFE coated
column in table.

*
Application ASTM Range Model PTFE Coated Subdiv. Length Immer-
sion
1F 0-302°F H-2600.1F H-2600.1FT 12.5"
322mm
CAUTION
1C -20-150°C H-2610.1C H-2610.1CT These thermometers contain mercury.
2F 20-580°F H-2600.2F H-2600.2FT 2.0°F 15.325" 3" There are restrictions on their sale and shipment.
General use 1.0°C 390mm 76mm Please check laws in your area or contact us be-
2C -5-300°C H-2610.2C H-2610.2CT
3F 20-760°F H-2600.3F H-2600.3FT fore ordering. Due to Illinois law, Humboldt must
16.25"
3C -5-400°C H-2610.3C H-2610.3CT 413mm drop-ship these items from New Jersey. Mercury
Thermometers require ground shipment in the
5F -36-120°F H-2600.5F H-2600.5FT 2.0°F 9.125" 4.25"
Cloud and pour 231mm U.S. International and air shipments ship
5C -38-50°C H-2610.5C H-2610.5CT 1.0°C 108mm)
as Dangerous Goods.
6F -112-70°F H-2600.6F H-2600.6FT 2.0°F 9.125" 3"
Low cloud and pour 231mm
6C -80-20°C H-2610.6C H-2610.6CT 1.0°C 76mm
7F 30-580°F H-2600.7F H-2600.7FT 2.0°F 15.25" ASTM Thermometers, Mercury
Low distillation 1.0°C 386mm Total
7C -2-300°C H-2610.7C H-2610.7CT ASTM Mercury Thermometers are made in
8F 30-760°F H-2600.8F H-2600.8FT 2.0°F 15.25" accordance with specifications of the American
High distillation 386mm Total
8C -2-400°C H-2610.8C H-2610.8CT 1.0°C
Society for Testing and Material. Strict
9F 20-230°C H-2600.9F H-2600.9FT 1.0°F 11.25" 2.25"
Pesky-martens low manufacturing procedures and quality controls
9C -5-110°C H-2610.9C H-2610.9CT .5°C 287mm 57mm
ensure full compliance to ASTM E-1. These
10F 200-700°F H-2600.10F H-2600.10FT 5.0°F 11.25" 2.25"
Pesky-martens high
2.0°C 287mm 57mm instruments are made from annealed glass and
10C 90-370°C H-2610.10C H-2610.10CT
have been extensively aged for minimal scale error
11F 20-760°F H-2600.11F H-2600.11FT 5.0°F 12.125" 1"
Cleveland open flash and stability. These thermometers were designed
11C -6-400°C H-2610.11C H-2610.11CT 2.0°C 308mm 25mm
12F -5-215°F H-2600.12F H-2600.12FT 0.5°F 16.5"
for specific testing and can be calibrated to your
Gravity total
12C -20-102°C H-2610.12C H-2610.12CT 0.2°C 420mm specific requirements.
15F 30-180°F H-2600.15F H-2600.15FT 0.5°F 15.625" ASTM Thermometers, PTFE-Coated
Low softening point 0.2°C 397mm total
15C -2-80°C H-2610.15C H-2610.15CT All ASTM Mercury Thermometers are available in
16F 85-392°F H-2600.16F H-2600.16FT 1.0°F 15.625"
High softening point total PTFE-coated versions to minimize breakage and
16C 30-200°C H-2610.16C H-2610.16CT .5°C 397mm
improve safety. See PTFE Coated column for part
17F 66-80°F H-2600.17F H-2600.17FT
17C 19-27°C H-2610.17C H-2610.17CT
numbers.
18F 94-108°F H-2600.18F H-2600.18FT Mercury Spill Clean-up Kit
18C 34-42°C H-2610.18C H-2610.18CT For recovery and disposal of spills up to 500g.
19F 120-134°F H-2600.19F H-2600.19FT
0.2°F 10.875" Includes gloves, two plastic spatulas for clean-
Saybolt viscosity 19C 49-57°C H-2610.19C H-2610.19CT total
0.1°C 275mm ing, mercury collector to swab spill, absorbent
20F 134-148°F H-2600.20F H-2600.20FT
and activator to absorb mercury, plastic bag for
20C 57-65°C H-2610.20C H-2610.20CT
21C 79-87°C H-2610.21C H-2610.21CT disposal, instructions.
22F 204-218°F H-2600.22F H-2600.22FT Mercury Spill Clean-up Kit H-3632SK
22C 95-103°C H-2610.22C H-2610.22CT
28F 97.5-102.5°F H-2600.28F H-2600.28FT Ship wt. 1.3lbs. (0.58kg)
0.1°F 12"
Kinematic viscosity 0.2°C 305mm total
28C 36.6-39.4°C H-2610.28C H-2610.28CT
33F -36.5-107.5°F H-2600.33F H-2600.33FT
Aniline point 33C -38-42°C H-2610.33C H-2610.33CT 0.5°F 16.5" 2'
35F 194-338°F H-2600.35F H-2600.35FT 0.2°C 419mm 50mm
35C 90-170°C H-2610.35C H-2610.35CT
45F 74.5-79.5°F H-2600.45F H-2600.45FT
45C 23.6-26.4°C H-2610.45C H-2610.45CT
Kinematic viscosity 46C 48.6-51.4°C H-2610.46C H-2610.46CT 0.1°F 12" total
0.2°C 305mm
47F 137.5-142.5°F H-2600.47F H-2600.47FT
47C 58.6-61.4°C H-2610.47C H-2610.47CT
Tag closed tester, 57F -4-122°F H-2600.57F H-2600.57FT 1.0°F 11.25" 2.25"
low range 57C -20-50°C H-2610.57C H-2610.57CT .5°C 287mm 57mm
63F 18-89°F H-2600.63F H-2600.63FT
63C -8-32°C H-2610.63C H-2610.63CT .2°F 15"
Precision .1 °C 379mm
64F 77-131°F H-2600.64F H-2600.64FT
64C 25-55°C H-2610.64C H-2610.64CT
110F 272.5-277.5°C H-2600.110F H-2600.110FT total
Kinematic viscosity .1°F 12"
110C 133.6-136.4°C H-2610.110C H-2610.110CT .2°C 305mm
Bituminous 113F 30-350°F H-2600.113F H-2600.113FT 1.0°F 16"
softening point 113C -1-175°C H-2610.113C H-2610.113CT .5°C 406mm

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

298
Thermometers, Timers LABORATORY

H-3568 H-4296A H-3575A H-4294 H-2260

H-2629 H-4296 HT-5011 H-4292

Bi-metal Oven Thermometer Timer, Humboldt Timer, Bell-Type

Thermometer provides a 100 to 600°F (50 to The Humboldt universal timer automatically shuts Economical, manual mechanical timer has
315°C) range at 25°F divisions. All-metal unit is off electrical apparatus at set time of up to 60 60-minute time range. Signals with clear bell tone
2.3" x 3.3" with baked-enamel finish on bezel. minutes. Features two receptacles and a 3-wire at end of set time for manual apparatus shut off.
Features bi-metal coil movement and glass lens. cord and plug.
Timer, Bell-Type H-4294
the thermometer can hang or stand by itself. Humboldt Timer, 120V 50/60Hz H-4296 Ship wt. 0.7lbs. (0.32kg)
Humboldt Timer, 220V 50/60Hz H-4296.4F
Bi-metal Oven Thermometer H-3568 Universal Lab Timer
Ship wt. 2.6lbs. (1.17kg)
Ship wt. 0.5lbs. (.23kg) Portable electric timer functions as elapsed-time
Digital Timer/Clock, 24-Hour indicator, interval timer and electrical apparatus
Surface Thermometer
Electronic digital timer/clock is programmed
Sensing element comes into direct contact with on-off timer. Features time range of 60 minutes
surface to be measured. Dial readout results from to sound for one minute when time is up. Unit by minutes and seconds, 8". dial with two sets
expansion or contraction of bi-metal. Unit is dual- counts down or up in seconds. LCD displays hours, of numerals (use inner circle of small numerals as
magnet type, 2" (51mm) dia. x 0.5" (13mm) high. minutes and seconds. Memory timer allows preset stop clock) and selective automatic buzzer alarm.
time to be stored. Unit has magnetic back for
Surface Thermometer, 0-250°F/2°F H-2628 Has two separate outlet receptacles for automatic
mounting to metal surfaces and can also clip on
Surface Thermometer, 0-500°F/5°F H-2628H switching of external appliances. Toggle switch
or stand on its own. Includes one 1.5 volt battery.
Surface Thermometer, 0-120°C/1°C H-2629 controls one outlet, which can make or break circuit
Ship wt. 0.3lbs. (.13kg) Digital Timer/Clock, 24-Hour H-3575A at “0.” Circuit automatically breaks on second
Ship wt. 0.7lbs. (0.32kg)
Digital Timer, Humboldt outlet after time interval.
Humboldt's portable digital timers automatically Countdown Timer, Giant Digit Universal Lab Timer, 120V 50/60Hz H-4292
shuts off electrical equipment at a set time of up Great for viewing from across a room, easily Universal Lab Timer, 220V 50Hz H-4292.5F
to 60 minutes or 60 seconds. Feature easy-to-use viewable from 50 ft. with 1.3" high numbers. Ship wt. 2.6lbs. (1.17kg)
digital interface and two-plug, AC receptacle. The Three-button intuitive operation eliminates Stopwatch
accuracy for both versions is 0.5%. reading instructions. Traceable timer has automatic Time-out type stopwatch, used for timing
Digital Timer, Minute, 120V 50/60Hz H-4296A bounce-back memory for repetitive timing. Timing operations and tests Start, stop and restart are
Digital Timer, Minute, 220V 50/60Hz H-4296A.4F range is 99 minutes, 59 seconds. Resolution is 1 activated by depressing the crown. Hands are reset
Digital Timer, Second, 120V 50/60Hz H-4299 second, accuracy is 0.01%. Individually, traceable by depressing pin on side of case. Features nickel-
Digital Timer, Second, 220V 50/60Hz H-4299.4F calibration certificate is provided, and comes with
Ship wt. 3.8lbs. (1.7kg)
chromium case and anti-magnetic shock-resistant
easel bench stand and magnetic back for place- 7-jewel movement.
anywhere mounting.
1/5 sec. movement, 1 rev = 60 sec H-2260
Countdown Timer, Giant Digit HT-5011 1/10 sec. movement, 1 rev = 30 sec H-2261
Ship wt. 0.6lbs. (0.27kg) Ship wt. 0.7lbs. (0.32kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 299
LABORATORY pH
p H Meters

HO-4940
H-4361A.4
HO-4941
HO-4960
HO-4930
HO-4943
H-4360A.7

Model HO-4930 HO-4940 HO-4941 HO-4943 HO-4960

-2.00 to 16.00 pH
Range 0.00 to 14.0 pH 0.00 to 14.00 pH 0.00 to 14.00 pH 0-1999 μs/cm
–1999 to 1999 mV
Resolution 0.01 pH 1 mV 0.1 °C 0.01 pH 0.01 pH 1μs/cm 0.01 pH 1 mV 0.1 °C
Accuracy ± 0.01 pH ± 1 mV ± 0.5 °C ± 0.05 pH ± 0.1pH ± 1.5% FS ± 0.01 pH ± 1 mV ± 0.5 °C
3 Points Up to 3 Points
Calibration 3 Points N/A N/A
1 Predefined Buffer Group 3 Predefined Buffer Groups
Temp. Range 0 °C to 100 °C 0.0 to 99.0 °C N/A N/A -5 °C to 110 °C

Portable pH Meter can endure consistent use in rugged environments. Buffer Solutions
The HO-4930 portable pH meter marries portability The electrodes are also replaceable, which extends Buffer solutions for meters with 0.01 resolution are
with precise pH measurement. An ORP or temperature the meters’ usable life considerably. Equipped with a standardized against NIST-traceable pH references
electrode can also be easily connected to provide wrist strap that helps to prevent unintentional drop- within 0.01 pH at 77°F (25°C). Store buffers away
additional functionality. ping, Analysis Pen meters are constructed with an from direct sunlight. Sold in single, 1 pint bottles.
• Auto buffer recognition stores calibration data and IP67 waterproof design that can prevent water dam- Buffer Solutions See Table
helps to avoid errors during the calibration process age when accidentally dropped into liquid. Ship wt. 2lbs. (0.9kg)

• Automatic and manual temperature compensation pH and Temp. Analysis Pen HO-4940
pH Analysis Pen HO-4941 Buffer Solutions Model
helps ensure accurate readings Ship wt. .39lbs. (.18kg)
pH 10.0 ±pH Accuracy, 1-pint H-4360A.10
The OHAUS Starter Series of portable water quality &
Conductivity Pen
electrochemistry meters was created with versatility pH 12.45 ±pH Accuracy, 1-pint H-4360A.12
This conductivity pen meter is a great choice for
in mind. They can be operated in the lab with the pH 1.68 ±pH Accuracy, 1-pint H-4360A.2
basic testing needs of the total ionic concentration
support of the built-in stands or in the field thanks to
within a solution. pH 4.01 ±pH Accuracy, 1-pint H-4360A.4
their lightweight design. With a crisp, well-organized
Conductivity Pen HO-4943
LCD screen and five clearly marked keys, utilizing Ship wt. .39lbs. (.18kg) pH 7.00 ±pH Accuracy, 1-pint H-4360A.7
the OHAUS Starter Series is simple for students and Soil Prep Solution, 500ml H-4360A.1
pH Bench Meter w/Electrode
teachers alike. The portable OHAUS Starter Series also
The HO-4960 pH Bench Meter offers premium fea-
boasts IP54 protection which shields the meter from Buffer Solution, Singles
tures at a cost-effective price point for reliable and
damage by water and dust particles and also offers an These convenient pH buffer packs are sealed
convenient pH and ORP measurements.
integrated labeling area which can be customized for against light, air, and other contaminants for fast,
• Starter 3100’s intuitive software includes three point
quick identification. Each meter can store 30 sets of data accurate results. Each pack contains enough buffer
calibration, three buffer groups, automatic and man-
memory and has the ability to quickly recall calibration solution for one calibration.
ual endpoint functions, as well as a 99 item library
data and stored information with one quick touch.
• Among Starter 3100’s user-friendly features that Buffer Solution, Singles See Table
Includes HO-4964 Plastic Gel, non-refillable electrode support ease-of-use are an adjustable stand-alone Ship wt. 1.5lbs. (.68kg)
(0-14pH) and a pH buffer powder sachet.
electrode holder and large backlit LCD display
Portable pH Meter HO-4930 • Documenting measurement data is made simple Buffer Solutions, Singles Model
Ship wt. .39lbs. (.18kg) through the RS232 which can be used to connect pH 10.0 ±pH Accuracy, 20 pack H-4361A.10
pH and Temp. Analysis Pens peripheral devices such as printers or computers
These pH/Temp. Analysis Pens offer a convenient to the meter pH 4.01 ±pH Accuracy, 20 pack H-4361A.4
way to measure pH, or the relative acidity or alkalinity Includes HO-4963, 3-in-1 plastic, refillable pH elec-
of a sample at a given temperature. The pH pen can trode, pH Buffer Powder Sachet and In-Use Cover. pH 7.00 ±pH Accuracy, 20 pack H-4361A.7
be completely operated with just one hand, freeing pH Bench Meter w/Electrode HO-4960
Ship wt. 3.8lbs. (1.7kg Deionized Water, 20 pack H-4361A.00
up your other hand to handle samples. Analysis pen
meters provide what should be expected of a small
Electrodes Model
pen meter: simple, fast, straightforward, no-frills
yet highly accurate operation time and time again. Electrode, pH only, refillable, BNC HO-4962
With durable plastic housing, a protective cap that Electrode, pH/temp., refillable, BNC HO-4963
safeguards the sensor and an automatic shutdown Electrode, pH/temp., non-refillable, BNC HO-4964
feature to preserve battery life, Analysis Pen meters Electrode, Temperature HO-4965

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

300
Scales & Balances LABORATORY
Digital Scale and Balance Comparison Chart
Capacity Readability Model Mfg. series Power Platform size Page No.
200g 0.01g HB-4528A Adam Core Balance CQT Compact Portable AC / AA 5.1" Dia. / 130mm 310
220g 0.001g HB-4620 Ohaus Scout STX Portable AC / AA 3.7" dia. / 93mm dia. 305
220g 0.01g HB-4621 Ohaus Scout STX Portable AC / AA 4.7" dia. / 120mm dia. 305
220g 0.01g HB-4720A Ohaus Scout SPX Portable AC / AA 4.7" dia. / 120mm dia. 305
220g 0.001g HB-4900 Adam Eclipse Precision AC 4.7" (120mm) Dia. 306
220g 0.001g HB-4700A Adam Nimbus Precision AC 4.7" (120mm) Dia. 307
250g 0.1g HB-4529A Adam Core Balance CQT Compact Portable AC / AA 5.1" Dia. / 130mm 310
300g 0.01g HB-4710A Adam HCB Highland™ Precision AC / Recharge 4.7” Dia. / 120mm 309
420g 0.001g HB-5342A Ohaus Adventurer Precision AC Ø 5.1" / 130 mm 304
420g 0.01g HB-4622 Ohaus Scout STX Portable AC / AA 4.7" dia. / 120mm dia. 305
420g 0.1g HB-4623 Ohaus Scout STX Portable AC / AA 4.7" dia. / 120mm dia. 305
420g 0.01g HB-4724A Ohaus Scout SPX Portable AC / AA 4.7" dia. / 120mm dia. 305
420g 0.1g HB-4723A Ohaus Scout SPX Portable AC / AA 4.7" dia. / 120mm dia. 305
420g 0.001g HB-4901 Adam Eclipse Precision AC 4.7" (120mm) Dia. 306
420g 0.001g HB-4701A Adam Nimbus Precision AC 4.7" (120mm) Dia. 307
520g 0.001g HB-5352A Ohaus Adventurer Precision AC 6.9" x 7.7" 175 x 195 mm 304
600g 0.02g HB-4711A Adam HCB Highland™ Precision AC / Recharge 4.7” Dia. / 120mm 309
600g 0.01g HB-4712A Adam HCB Highland™ Precision AC / Recharge 4.7” Dia. / 120mm 309
600g 0.1g HB-4530A Adam Core Balance CQT Compact Portable AC / AA 5.1" Dia. / 130mm 301
620g 0.01g HB-4624 Ohaus Scout STX Portable AC / AA 4.7" dia. / 120mm dia. 305
620g 0.1g HB-4625 Ohaus Scout STX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
620g 0.01g HB-4725A Ohaus Scout SPX Portable AC / AA 4.7" dia. / 120mm dia. 305
620g 0.1g HB-4726A Ohaus Scout SPX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
620g 0.001g HB-4902 Adam Eclipse Precision AC 6.3" (160mm) Dia. 306
620g 0.001g HB-4716A Adam Nimbus Precision AC 4.7" (120mm) Dia. 307
820g 0.001g HB-4903 Adam Eclipse Precision AC 6.3" (160mm) Dia. 306
820g 0.001g HB-4702A Adam Nimbus Precision AC 4.7" (120mm) Dia. 307
1000g 0.01g HB-4713A Adam HCB Highland™ Precision AC / Recharge 4.7” Dia. / 120mm 309
1020g 0.001g HB-4904 Adam Eclipse Precision AC 6.3" (160mm) Dia. 306
1100g 0.1g HB-4960 Ohaus Navigator XL Portable AC / battery 7.6" x 8" / 194 x 203mm 310
1200g 0.01g HB-4626 Ohaus Scout STX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
1200g 0.01g HB-4740A Ohaus Scout SPX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
1500g 0.05g HB-4714A Adam HCB Highland™ Precision AC / Recharge 4.7” Dia. / 120mm 309
1500g 0.1g HB-4532A Adam Core Balance CQT Compact Portable AC / AA 5.1" Dia. / 130mm 310
1520g 0.01g HB-5315A Ohaus Adventurer Precision AC 6.9" x 7.7" 175 x 195 mm 304
1600g 0.01g HB-4906 Adam Eclipse Precision AC 6.3" (160mm) Dia. 306
1600g 0.01g HB-4703A Adam Nimbus Precision AC 6.3" (160mm) Dia. 307
1600g 0.1g HB-4950 Ohaus Navigator XT Portable AC / Recharge 9.00" x 6.90" / 250 x 240mm 310
1620g 0.001g HB-4905 Adam Eclipse Precision AC 6.3" (160mm) Dia. 306
2000g 1g HB-4534A Adam Core Balance CQT Compact Portable AC / AA 5.1" Dia. / 130mm 310
2100g 0.1g HB-4961 Ohaus Navigator XL Portable AC / battery 7.6" x 8" / 194 x 203mm 310
2200g 0.01g HB-5322A Ohaus Adventurer Precision AC 6.9" x 7.7" 175 x 195 mm 304
2200g 0.01g HB-5220 Ohaus Explorer Precision AC 7.5" x 7.9" 190 x 200mm 304
2200g 0.01g HB-4627 Ohaus Scout STX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
2200g 0.1g HB-4628 Ohaus Scout STX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
2200g 0.01g HB-4741A Ohaus Scout SPX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
2200g 0.1g HB-4727A Ohaus Scout SPX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
2600g 0.01g HB-4907 Adam Eclipse Precision AC 6.3" (160mm) Dia. 306
2600g 0.01g HB-4704A Adam Nimbus Precision AC 6.3" (160mm) Dia. 307
2600g 0.1g HB-4533A Adam Core Balance CQT Compact Portable AC / AA 5.1" Dia. / 130mm 310
3000g 0.1g HB-4715A Adam HCB Highland™ Precision AC / Recharge 4.7” Dia. / 120mm 309
3000g 0.1g HB-4730 Ohaus Ranger 3000 Compact Bench AC / Recharge 8.9" x 11.8" / 225 x 300mm 309
3200g 0.2g HB-4951 Ohaus Navigator XT Portable AC / Recharge 9.00" x 6.90" / 250 x 240mm 310
3600g 0.01g HB-4908 Adam Eclipse Precision AC 6.3" (160mm) Dia. 306
3600g 0.01g HB-4705A Adam Nimbus Precision AC 6.3" (160mm) Dia. 307
4200g 0.01g HB-5343A Ohaus Adventurer Precision AC 6.9" x 7.7" 175 x 195 mm 304
4200g 0.1g HB-5344A Ohaus Adventurer Precision AC 6.9" x 7.7" 175 x 195 mm 304
4200g 0.01g HB-5420 Ohaus Explorer Precision AC 7.5" x 7.9" 190 x 200mm 304
4200g 0.1g HB-4911 Adam Eclipse Precision AC 6.3" (160mm) Dia. 306
4200g 0.1g HB-4539B Adam Nimbus Precision AC 6.3" (160mm) Dia. 307
4600g 0.01g HB-4909 Adam Eclipse Precision AC 6.3" (160mm) Dia. 306
4600g 0.01g HB-4706A Adam Nimbus Precision AC 6.3" (160mm) Dia. 307
5000g 1g HB-4535A Adam Core Balance CQT Compact Portable AC / AA 5.1" (130mm) Dia. 310

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 301
LABORATORY Scales & Balances
Digital Scale and Balance Comparison Chart
Capacity Readability Model Mfg. series Power Platform size Page No.
5100g 0.5g HB-4962 Ohaus Navigator XL Portable AC / battery 7.6" x 8" / 194 x 203mm 310
5200g 0.01g HB-5355AC Ohaus Adventurer Precision AC 6.9" x 7.7" 175 x 195 mm 304
6000g 0.2g HB-4731 Ohaus Ranger 3000 Compact Bench AC / Recharge 8.9" x 11.8" / 225 x 300mm 309
6200g 0.01g HB-5622 Ohaus Explorer Precision AC 7.5" x 7.9" 190 x 200mm 304
6200g 0.1g HB-5620 Ohaus Explorer Precision AC 7.5" x 7.9" 190 x 200mm 304
6200g 0.1g HB-4629 Ohaus Scout STX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
6200g 0.1g HB-4729A Ohaus Scout SPX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
6200g 0.01g HB-4910 Adam Eclipse Precision AC 6.3" (160mm) Dia. 306
6200g 0.1g HB-4912 Adam Eclipse Precision AC 6.3" (160mm) Dia. 306
6200g 0.1g HB-4540B Adam Nimbus Precision AC 6.3" (160mm) Dia. 307
6400g 0.5g HB-4952 Ohaus Navigator XT Portable AC / Recharge 9.00" x 6.90" / 250 x 240mm 310
8200g 0.1g HB-5382A Ohaus Adventurer Precision AC 6.9" x 7.7" 175 x 195 mm 304
8200g 1.0g HB-4630 Ohaus Scout STX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
8200g 1.0g HB-4742A Ohaus Scout SPX Portable AC / AA 5.5" x 6.7" / 140 x 170mm 305
8200g 0.1g HB-4541B Adam Nimbus Precision AC 6.3" (160mm) Dia. 307
10000g 0.5g HB-4953 Ohaus Navigator XT Portable AC / Recharge 9.00" x 6.90" / 250 x 240mm 310
10000g 1g HB-4963 Ohaus Navigator XL Portable AC / battery 7.6" x 8" / 194 x 203mm 310
10200g 0.01g HB-5102C Ohaus Explorer Precision AC 7.5" x 7.9" 190 x 200mm 304
10200g 0.1g HB-5100C Ohaus Explorer Precision AC 7.5" x 7.9" 190 x 200mm 304
16000g 1g HB-4954 Ohaus Navigator XT Portable AC / Recharge 9.00" x 6.90" / 250 x 240mm 310
20000g 1g HB-4964 Ohaus Navigator XL Portable AC / battery 7.6" x 8" / 194 x 203mm 310
8lb./4kg 0.0002lb/0.1g HB-4644 Adam CBK Bench AC / battery 8.9" x 10.8" (225 x 275mm) 312
12kg 0.1g HB-4943 Adam Eclipse High Capacity AC / Recharge 9.4 x 9.4" (240 x 240mm) 309
12kg 0.1g HB-4506A Ohaus Explorer High Capacity AC / Recharge 15.7" x 11.8" (400 x 300mm) 308
12kg 0.1g HB-3515 Ohaus Ranger 7000 High Capacity AC / Recharge 14.8" x 12.2" (377 x 311mm) 308
12kg 0.1g HB-4543B Adam Nimbus High Capacity AC 15.7" x 11.8" (400 x 300mm) 308
15kg 0.5g HB-4732 Ohaus Ranger 3000 Compact Bench AC / Recharge 8.9" x 11.8" / 225 x 300mm 309
35lb. / 16kg 0.001lb / .5g HB-4874 Adam ABK Portable AC / battery 11.8" X 15.7" / 300mm X 400mm 311
35lb./16kg 0.001lb/0.5g HB-4636A Adam CBK Bench AC / battery 8.9" x 10.8" (225 x 275mm) 312
35lb./16kg 0.001lb/0.5g HB-4636AWB Adam CBK Bench AC / battery 8.9" x 10.8" (225 x 275mm) 312
16kg 0.1g HB-4545B Adam Nimbus High Capacity AC 15.7" x 11.8" (400 x 300mm) 308
16kg 0.1g HB-4945 Adam Eclipse High Capacity AC / Recharge 9.4 x 9.4" (240 x 240mm) 309
22kg 0.1g HB-4946 Adam Eclipse High Capacity AC / Recharge 12.2 x 14.8" (311 x 377mm) 309
24kg 0.1g HB-4508A Ohaus Explorer High Capacity AC / Recharge 15.7" x 11.8" (400 x 300mm) 308
60lb. / 30kg 0.005lb / 2g HB-4930 Ohaus Defender 5000 Low Profile AC / C batteries 12" X 14" / 30.5mm X 35.5mm 312
66lb. / 30kg 0.01lb / .005kg HB-4830 Ohaus Defender 3000 Bench AC / C batteries 12" X 14" / 30.5mm X 35.5mm 311
30kg 1g HB-4733 Ohaus Ranger 3000 Compact Bench AC / Recharge 8.9" x 11.8" / 225 x 300mm 309
70lb / 32kg 0.002lb / 1g HB-4875 Adam ABK Portable AC / battery 11.8" X 15.7" / 300mm X 400mm 311
70lb./32kg 0.002lb/1g HB-4635A Adam CBK Bench AC / battery 8.9" x 10.8" (225 x 275mm) 312
70lb./32kg 0.002lb/1g HB-4635AWB Adam CBK Bench AC / battery 8.9" x 10.8" (225 x 275mm) 312
35kg 0.1g HB-3535 Ohaus Ranger 7000 High Capacity AC / Recharge 14.8" x 12.2" (377 x 311mm) 308
35kg 0.1g HB-4510A Ohaus Explorer High Capacity AC / Recharge 15.7" x 11.8" (400 x 300mm) 308
35kg 0.1g HB-4546B Adam Nimbus High Capacity AC 15.7" x 11.8" (400 x 300mm) 308
75lb./35kg 0.02lb/.01kg HB-4774 Adam CPWplus Portable AC / AA 12" sq / 300mm sq. 311
32kg 0.1g HB-4947 Adam Eclipse High Capacity AC / Recharge 12.2 x 14.8" (311 x 377mm) 309
100lb./48kg 0.005lb/2g HB-4634A Adam CBK Bench AC / battery 8.9" x 10.8" (225 x 275mm) 312
100lb./48kg 0.005lb/2g HB-4634AWB Adam CBK Bench AC / battery 8.9" x 10.8" (225 x 275mm) 312
110lb./50kg 0.05lb/0.02kg HB-4770 Ohaus ES Bench AC / AA 12.2 x 10.8 in. / 310 x 270mm 312
110lb./50kg 0.05lb/0.02kg HB-4769 Ohaus ES Bench AC / AA 20.5 x 15.7 in. / 520 x 400mm 312
130lb / 60kg 0.005lb / 2g HB-4876 Adam ABK Portable AC / battery 11.8" X 15.7" / 300mm X 400mm 311
132lb / 60kg 0.02lb / 10g HB-4831 Ohaus Defender 3000 Bench AC / C batteries 12" X 14" / 30.5mm X 35.5mm 311
150lb / 60kg 0.01lb / 5g HB-4931 Ohaus Defender 5000 Low Profile AC / C batteries 12" X 14" / 30.5mm X 35.5mm 312
165lb./75kg 0.05lb/.02kg HB-4775A Adam CPWplus Portable AC / AA 12" sq / 300mm sq. 311
220lb./100kg 0.1lb/0.05kg HB-4771 Ohaus ES Bench AC / AA 20.5 x 15.7 in. / 520 x 400mm 312
250lb / 100kg 0.02lb / 10g HB-4932 Ohaus Defender 5000 Low Profile AC / C batteries 15.7" X 19.7" / 400mm X 500mm 312
260lb / 120kg 0.01lb / 5g HB-4877 Adam ABK Portable AC / battery 11.8" X 15.7" / 300mm X 400mm 311
300lb / 150kg 0.02lb / 10g HB-4933 Ohaus Defender 5000 Low Profile AC / C batteries 16.5" X 21.7" / 420mm X 550mm 312
330lb / 150kg 0.05lb / 20g HB-4832 Ohaus Defender 3000 Bench AC / C batteries 19.7" X 25.6" / 500mm X 650mm 311
330lb./150kg 0.1lb/.05kg HB-4776 Adam CPWplus Portable AC / AA 12" sq / 300mm sq. 311
440lb./200kg 0.1lb/.05kg HB-4777 Adam CPWplus Portable AC / AA 12" sq / 300mm sq. 311
440lb./200kg 0.2lb/0.1kg HB-4772 Ohaus ES Bench AC / AA 20.5 x 15.7 in. / 520 x 400mm 312
600lb / 300kg 0.05lb / 20g HB-4934 Ohaus Defender 5000 Low Profile AC / C batteries 17" X 22" / 42mm X 55mm 312
660lb / 300kg 0.1lb / 50g HB-4833 Ohaus Defender 3000 Bench AC / C batteries 19.7" X 25.6" / 500mm X 650mm 311

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

302
Scales & Balances LABORATORY

HB-5292DC

HB-5342 HB-5102 HB-5292T

Ohaus Adventurer Precision Balances Ohaus Explorer Precision Balances weigh-below weighing applications. The balance
The OHAUS Adventurer incorporates all of the The Ohaus Explorer balance provides the ultimate also uses a unique system of four touchless sensors
applications necessary for routine weighing and in a precision balance by combining fast and highly located on the balance, which let you program
measurement activities. With a color touchscreen, accurate weighing results with intuitive weighing functions like print, calibration, tare, etc. that can
GLP/GMP compliance capabilities, two USB software, touchless user-programmable operation be activated by the wave of your hand.
ports, and much more, the Adventurer is the most sensors, modular design and auto-cal internal
See Chart for Models and Specifications
complete balance in its class. The Adventurer allows calibration. The Explorer provides a large, angle-
you to operate and access its nine application modes adjustable, touch-screen color display, highlighted Ohaus Adventurer Precision Accessories
and abundant features that eliminate the need to by icon-driven application software, which provides
Description Part #
do several manual calculations through the modern 14 unique application modes. The Explorer
Cable, USB interface HB-5392C
color touchscreen. It also has six mechanical keys features fast stabilization times and internal or
that provide tactile feedback and allow the operator external calibration models. The Explorer is also Cable, RS232 PC 25-pin HB-5392R
to perform repetitive operations such as tare, zero, durable, featuring metal base construction with an
calibration, and print. It is available in external and ABS top housing, stainless pan, glass draft shield Ohaus Explorer Accessories
internal calibration models. The internal calibration and a replaceable in-use cover.
Description Part #
models perform routine calibration maintenance The Explorer's modular design allows the user
Cable, display extension HB-5292DC
automatically. You can also save balance settings to configure the balance in almost any setup
and transfer them to other Adventurers in your lab. needed, with a display that can be separated from Display tower mount HB-5292T
The balance also features an integral weigh-below the weighing base for detached control from a Cable, RS232 PC 25-pin HB-5392R
hook for weigh-below weighing applications. counter, the wall or tower-mounted. The balance Cable, USB interface HB-5392C
See Chart for Models and Specifications also features an integral weigh-below hook for

Ohaus Adventurer Precision Balances

External Calibration Internal Calibration
Readabil-
Capacity Repeatability Linearity Power Pan Size Ship Wt.
ity 120V 60Hz 220V 50/60 Hz 120V 60Hz 220V 50/60 Hz

420g 0.001g HB-5342A HB-5342A.4F HB-5342AC HB-5342AC.4F ±0.001g ±0.002g

Ø 5.1" / 130 mm
520g 0.001g HB-5352A HB-5352A.4F HB-5352AC HB-5352AC.4F ±0.001g ±0.002g
1520g 0.01g HB-5315A HB-5315A.4F HB-5315AC HB-5315AC.4F ±0.01g ±0.02g
10 lb/4.5kg
2200g 0.01g HB-5322A HB-5322A.4F HB-5322AC HB-5322AC.4F ±0.01g ±0.02g
AC
4200g 0.01g HB-5343A HB-5343A.4F HB-5343AC HB-5343AC.4F ±0.01g ±0.02g
4200g 0.1g HB-5344A HB-5344A.4F HB-5344AC HB-5344AC.4F ±0.1g ±0.2g
5200g 0.01g — — HB-5355AC HB-5355AC.4F ±0.01g ±0.02g
8200g 0.1g HB-5382AC HB-5382AC.4F — — ±0.1g ±0.2g 12.6 lb (5.7kg)

Ohaus Explorer Precision Balances

External Calibration Internal Calibration
Capacity Readability Repeatability Linearity Power Pan Size Ship Wt.
120V 60Hz 220V 50/60 Hz 120V 60Hz 220V 50/60 Hz

2200g 0.01g HB-5220 HB-5220.4F HB-5220C HB-5220C.4F ±0.01g ±0.02g

15 lb/6.8kg
4200g 0.01g HB-5420 HB-5420.4F HB-5420C HB-5420C.4F ±0.01g ±0.02g
6200g 0.01g HB-5622 HB-5622.4F HB-5622C HB-5622C.4F ±0.01g ±0.02g 7.5" x 7.9"
AC 16.3 lb/7.38kg
6200g 0.1g HB-5620 HB-5620.4F HB-5620C HB-5620C.4F ±0.1g ±0.1g 190 x 200mm

10200g 0.01g — — HB-5102C HB-5102C.4F ±0.01g ±0.02g

10 lb/4.5kg
10200g 0.1g — — HB-5100C HB-5100C.4F ±0.1g ±0.1g

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 303
LABORATORY Scales & Balances

HB-4624 HB-4740A

Ohaus Scout STX Portable Balance • Display: 4.3" (109mm) full-color VGA graphic Integrated superior overload protection and impact-
Ideal for laboratory & industrial applications, the touchscreen display with user-controlled resistant pan support safeguard against shock and
OHAUS Scout features an easy to navigate color brightness overloading the balance in rugged and demanding
touchscreen display & a slim design which allows • Operation: AC adapter (included) or 4 AA batteries environments. Stabilization time as fast as 1 sec and
stackable storage. Geared for superior performance (not included) advanced weighing technology, lead to improved
with fast stabilization time and high resolution productivity in your facility. Increased capacity
• Communication: RS232, USB Host, USB Device,
weighing results, these portable balances set a new unlocks a wider range of weighing applications.
Ethernet or Bluetooth
standard for a broad range of weighing applications. • Display: Liquid crystal display (LCD) with backlight
Features also include superior overload protection See Chart for Models and Specifications
• Operation: AC adapter (included) or 4 AA
and expanded connectivity options. Large, resilient Ohaus Scout SPX Portable Balance batteries (not included)
color touchscreen allows for effortless operation of Ideal for laboratory and industrial applications, the
• Communication: RS232, USB Host, USB Device,
the Scout through its informative icon driven menu OHAUS Scout comes in a slim design with large backlit
Ethernet or Bluetooth
structure, guiding the user through every step of the LCD. Features include superior overload protection,
weighing application. Stabilization time as fast as 1 sec multiple weighing units and application modes. See Chart for Models and Specifications
means increased productivity in your facility. Equipped Geared for high performance in your facility with Accessories
with advanced weighing technology, the Scout also fast stabilization time and high resolution weighing Description Part #
ensures repeatable and reliable weighing results. results, these portable balances set a new standard
Ethernet Kit HB-4620.1
Integrated superior overload protection system in laboratory and industrial weighing. Combined with
rated at 10 times the capacity protects the balance a simplified 4 button operation, the Scout's large Bluetooth Kit HB-4620.2
in rugged and demanding environments. The space- backlit display increases readability in low light working RS232 Kit HB-4620.3
saving, slim design allows for stackable storage. conditions, and is easier to view from a distance. USB Kit– Device HB-4620.4
USB Kit– Host HB-4620.5
Ohaus Scout STX Portable Balance
Capacity Readability 120V 220V Repeatability Units Power Pan Size Ship Wt.
220g 0.001g HB-4620 HB-4620.4F 0.002 3.7" dia. / 93mm dia.
220g 0.01g HB-4621 HB-4621.4F 0.01
420g 0.01g HB-4622 HB-4622.4F 0.01 mg,g,k-
4.7" dia. / 120mm dia.
420g 0.1g HB-4623 HB-4623.4F 0.1 g,ct,N,oz,oz-
620g 0.01g HB-4624 HB-4624.4F 0.01 t,dwt,lb,l-
AC
620g 0.1g HB-4625 HB-4625.4F 0.1 b:oz,grn,
(4) AA batteries
10.0 lb/4.5kg
1200g 0.01g HB-4626 HB-4626.4F 0.02 hkt,
2200g 0.01g HB-4627 HB-4627.4F 0.02 sgt,twt,ti-
5.5" x 6.7" / 140 x 170mm
2200g 0.1g HB-4628 HB-4628.4F 0.1 cal,tola
6200g 0.1g HB-4629 HB-4629.4F 0.2
8200g 1.0g HB-4630 HB-4630.4F 1.0

Ohaus Scout SPX Portable Balance

Capacity Readability 120V 220V Repeatability Units Power Pan Size Ship Wt.
220g 0.01g HB-4720A HB-4720A.4F 0.01
420g 0.01g HB-4724A HB-4724A.4F 0.01
4.7" dia. / 120mm dia.
420g 0.1g HB-4723A HB-4723A.4F 0.1
g,
620g 0.01g HB-4725A HB-4725A.4F 0.01
620g 0.1g HB-4726A HB-4726A.4F 0.1 kg,ct,N,oz, AC 5 lb/2.26kg
1200g 0.01g HB-4740A HB-4740A.4F 0.02 ozt,dwt,lb, (4) AA batteries
2200g 0.01g HB-4741A HB-4741A.4F 0.02
lb:oz,gm 5.5" x 6.7" / 140 x 170mm
2200g 0.1g HB-4727A HB-4727A.4F 0.1
6200g 0.1g HB-4729A HB-4729A.4F 0.1
8200g 1.0g HB-4742A HB-4742A.4F 1

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

304
Scales & Balances LABORATORY

HB-4904

Adam Eclipse Precision Balances text prompts, instructions and any other relevant monitoring possible overloads
With a full spectrum of advanced features, the information. Clear, discernable symbols and multi- • USB and RS-232 interfaces provide speedy
Eclipse series of precision and analytical balances lingual text make operation easy, while prompts communication with computers and printers
provides unparalleled performance. Its elegant simplify even the most complex activities. The • Printouts include date and time for data
capacitive touch keypad and large display bring Eclipse achieves connectivity with precision and tracking within Good Laboratory Practices (GLP)
a balance of effciency, durability, and intuitive speed, whether it’s basic data printing or advanced guidelines
operation to any laboratory. Every Eclipse is out communication with a Laboratory Information
• Robust metal housing protects internal
fitted with an elegant capacitive touch keypad Management System. Printouts with time, date,
components in harsh environments
containing color-coded keys, which enable and other information are provided to comply
uncomplicated navigation of the functions and with GLP requirements. USB and RS-232 interfaces • Large, grade 304 stainless steel pan allows swift
features. Operating with a feather-light touch, optimize connections, while a third interface allows cleaning
the keys respond readily, even while wearing use of an optional remote display. • Level indicator and adjusting feet ensure proper
latex-gloves. The keypad’s smooth surface allows • The illuminated capacitive touch keypad balance setup for optimum weighing results
fingerprints to be wiped off easily. Illuminated provides responsive operation, and its durable, • Removable draught shield on models with
keys guide users through tasks, highlighting smooth surface can be easily wiped down 0.001g readability helps to reduce errors caused
available options. Featuring one of the largest by air currents
• Vivid, backlit LCD easily visible in any lighting
LCD readouts in the industry, the Eclipse displays
conditions
sizeable white digits on a deep-blue background, See Chart for Models and Specifications
• Capacity tracker built into display for easily
ensuring ultimate visibility. A second line shows

Adam Eclipse Precision Balances Accessories

External Calibration Ship Description Part #
Capacity Readability Power Pan Size
120V 60Hz 220V 50/60 Hz Wt. Weight-below hook HB-4541B.2
220g 0.001g HB-4900 HB-4900.4F In-use wet cover, 120mm pan HB-4900.1
4.7" (120mm) Dia.
420g 0.001g HB-4901 HB-4901.4F In-use wet cover, 160mm pan HB-4902.1
620g 0.001g HB-4902 HB-4902.4F Cable, RS232 HB-4700ACB
820g 0.001g HB-4903 HB-4903.4F Cable, USB HB-4700AUSB
1020g 0.001g HB-4904 HB-4904.4F Data collection software HB-4545B.3
1620g 0.001g HB-4905 HB-4905.4F
1600g 0.01g HB-4906 HB-4906.4F AC 15 lb/7kg

2600g 0.01g HB-4907 HB-4907.4F 6.3" (160mm) Dia.

3600g 0.01g HB-4908 HB-4908.4F
4200g 0.1g HB-4911 HB-4911.4F
4600g 0.01g HB-4909 HB-4909.4F
6200g 0.01g HB-4910 HB-4910.4F
6200g 0.1g HB-4912 HB-4912.4F

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 305
LABORATORY Scales & Balances

HB-4701A HB-4703A

Adam Nimbus Precision Balances Optimized configuration of the Nimbus’s internal • Robust metal housing protects internal
The Nimbus series of balances offers a range of weighing system results in enhanced performance. components in harsh environments
models that deliver precision readabilities from Fabricated from a single block, the weighing • Sealed keypad protects against dirt and
0.0001g (0.1mg) to 0.1g. With a compact footprint sensor contains fewer parts than a traditional force accidental spills
and intuitive user interface, Nimbus provides motor balance, improving efficiency.
• USB and RS-232 interfaces provide speedy
a streamlined weighing experience. Enhanced Features: communication with computers and printers
processing power combines with efficient
• Vivid, backlit LCD easily visible in any lighting • Large, grade 304 stainless steel pan allows swift
technology to produce a balance that weathers the
conditions cleaning
storms in demanding laboratories. Experience the
• Color-coded keys facilitate quick recognition of • External calibration allows for verification and
Nimbus by Adam Equipment.
the most frequently used buttons adjustment with weights
Innovative design creates a smaller footprint, so the
• Level indicator and adjusting feet ensure proper
Nimbus occupies minimal space on the lab bench. See Chart for Models and Specifications
balance setup for optimum weighing results
An extruded aluminum base provides superior
thermal transfer, offering greater stability and • Removable draft shield on models with 0.001g
performance. Solid metal construction throughout readability helps to reduce errors caused by air
the balance durably withstands chemicals and currents
rigorous daily use.

Adam Nimbus Precision Balances Accessories

External Calibration Ship Description Part #
Capacity Readability Power Pan Size
120V 60Hz 220V 50/60 Hz Wt. Weight-below hook HB-4541B.2
220g 0.001g HB-4700A HB-4700A.4F In-use wet cover, 120mm pan HB-4900.1
420g 0.001g HB-4701A HB-4701A.4F In-use wet cover, 160mm pan HB-4902.1
4.7" (120mm) Dia.
620g 0.001g HB-4716A HB-4716A.4F Cable, RS232 HB-4700ACB
820g 0.001g HB-4702A HB-4702A.4F Cable, USB HB-4700AUSB
1600g 0.01g HB-4703A HB-4703A.4F Data collection software HB-4545B.3
2600g 0.01g HB-4704A HB-4704A.4F AC 15 lb/7kg

3600g 0.01g HB-4705A HB-4705A.4F

4200g 0.1g HB-4539B HB-4539B.4F 6.3" (160mm) Dia.
4600g 0.01g HB-4706A HB-4706A.4F
6200g 0.1g HB-4540B HB-4540B.4F
8200g 0.1g HB-4541B HB-4541B.4F

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

306
Scales & Balances LABORATORY

HB-3535 HB-4506A HB-4545B

Ohaus Ranger 7000 High-Capacity Balances Ohaus Explorer High-Capacity Precision Balances Adam Nimbus High-Capacity Precision Balances
The Ranger 7000 balances were developed to thrive The Explorer series includes three high-capacity, Nimbus high-capacity balances offer a range
in rugged and harsh industrial environments. This precision balances with capacities up to 35 kg. of models that deliver a precision readability of
modular scale was built with IP54 a cast-metal housing Explorer high-capacity balances offer the same 0.1g. With a compact footprint and intuitive user
and sealed-metal indicator to ensure durability. intuitive and modular features as standard Explorer interface, Nimbus provides a streamlined weighing
The indicator can be separated from the platform models, such as AutoCal™ fully-automatic internal experience. Enhanced processing power combines
and mounted to the wall or bench with the optional calibration system, which can also be turned off, 1 with efficient technology to produce a balance that
mounting kit accessory, allowing you to customize the second stabilization time, two touchless sensors weathers the storms in demanding laboratories.
placement of your scale based on the size and setup of for operation control, with additional functions Nimbus balances provide a vivid, backlit LCD
your workstation. Additionally, a weigh-below hook and attributes to support higher capacity weighing for easy viewing in any lighting conditions. A
offers the functionality to perform specific gravity applications. Balances include: 5.7" full-color level indicator and adjusting feet ensure proper
tests or weigh items that cannot be easily placed on touch screen (640 x 480 pixel), which is removable balance setup for optimum weighing results.
the weighing platform. The SmarText 2.0 software for remote or column-mount placement, QWERTY Color-coded keys facilitate quick recognition of
interface will have you easily using the Ranger 7000 keyboard and numeric keypad to quickly input the most frequently used buttons facilitating quick
for all of its unique and advanced features quickly. GLP and GMP data and other application data; operation. Innovative design creates a smaller
SmartText 2.0 makes an advanced scale very simple Easy access communication ports include standard footprint, so the Nimbus occupies minimal space
to use, and will greatly reduce training time for USB and RS232 and an optional third port of on the lab bench. An extruded aluminum base
operators. Data produced by these balances can either RS232 or ethernet; die-casting housing, provides superior thermal transfer, offering greater
easily be exported through a standard RS232 or stainless steel pan and replaceable in-use cover; stability and performance. Solid metal construction
USB device port. Additional connectivity options and, integral weigh below hook. Options include: throughout the balance durably withstands
include a second RS232, ethernet or standard USB touch screen column; rolling feet kit; rechargeable chemicals and rigorous daily use. Weigh-below
port. Includes an integral weigh-below hook. battery; cables and interface kits. hook can be ordered from the chart below.
Ohaus Ranger 700 High Capacity Balances see chart Ohaus Explorer High Capacity Balances see chart Adam Nimbus Precision Balances see chart
Ship wt. 10lbs. (4.53kg) Ship wt. 27.5lbs. (12.47kg) Ship wt. 21lbs. (9.5kg)

Ohaus Ranger 7000 High-Capacity Balances Ohaus Ranger Accessory Part #

Cap. Readability Platform 120V 60Hz 220V 50/60Hz Rechargeable battery HB-4506RB
15kg 0.1g 14.8" x 12.2" (377 x 311mm) HB-3515 HB-3515.4F Cable, display extension, 9m HB-5292DC
35kg 0.1g 14.8" x 12.2" (377 x 311mm) HB-3535 HB-3535.4F
Column kit HB-4506T
RS232 kit HB-3515.RS

Ohaus Explorer High-Capacity Balances Ohaus Explorer Accessory Part #

Cap. Readability Platform 120V 60Hz 220V 50/60Hz Wheel kit (set of 4) HB-4506RF
12kg 0.1g 15.7" x 11.8" (400 x 300mm) HB-4506A HB-4506A.4F Rechargeable battery kit HB-4506RB
24kg 0.1g 15.7" x 11.8" (400 x 300mm) HB-4508A HB-4508A.4F
Cable, display extension HB-5292DC
35kg 0.1g 15.7" x 11.8" (400 x 300mm) HB-4510A HB-4510A.4F
Column kit HB-4506T
Cable, RS232 PC 25-pin HB-5392R
Cable, USB interface HB-5392C
Adam Nimbus High Capacity Precision Balances
Cap. Readability Platform 120V 60Hz 220V 50/60Hz Adam Nimbus Accessory Part #
12kg 0.1g 15.7" x 11.8" (400 x 300mm) HB-4543B HB-4543B.4F Weigh-below hook HB-4545B.1
16kg 0.1g 15.7" x 11.8" (400 x 300mm) HB-4545B HB-4545B.4F
Nimbus HC In-use cover HB-4545B.2
35kg 0.1g 15.7" x 11.8" (400 x 300mm) HB-4546B HB-4546B.4F
RS-232 cable HB-4700ACB
USB cable HB-4700AUSB
Data capture software HB-4545B.3

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 307
LABORATORY Scales & Balances

HB-4945 HB-4712A HB-4731

Adam Eclipse High-Capacity Precision Balances information. Clear, discernable symbols and multi- calibration provides reliable readings. Includes
Eclipse high-capacity balances offer a range of lingual text make operation easy, while prompts Stainless steel pan; Removable draft shield; Auto
models that deliver a precision readability of simplify even the most complex activities. The power-off saves battery life; Dual, color-coated tare
0.1g. With a full spectrum of advanced features, Eclipse achieves connectivity with precision and keys and a large, backlit display that is clear and
the Eclipse series of precision and analytical speed, whether it’s basic data printing or advanced quick to read.
balances provides unparalleled performance. communication with a Laboratory Information See Chart below for Models and Specifications
Its elegant capacitive touch keypad and large Management System. Printouts with time, date, Ohaus Ranger 3000 Compact Bench Scales
display bring a balance of e ciency, durability, and other information are provided to comply The Ranger 3000 can produce accurate results
and intuitive operation to any laboratory. Every with GLP requirements. USB and RS-232 interfaces within 1 second. Its rapid stabilization time aids in
Eclipse is equipped with an elegant capacitive optimise connections, while a third interface allows waiting for the scale in weighing items. Its large
touch keypad containing colour-coded keys, use of an optional remote display. LEDs and backlit LCD display makes it functional
which enable uncomplicated navigation of the Adam HCB Highland™ Precision Balances in almost any working condition. The scale uses
functions and features. Operating with a feather- Adam’s Highland balances have what it takes for lab AC power or a rechargeable battery, which is
light touch, the keys respond readily, even while work. They feature multiple weighing units, RS-232 included. Battery life of up to 210 hours keeps it
wearing latex-gloves. The keypad’s smooth surface and USB interfaces, rechargeable battery pack and running when you need it. Its adjustable leveling
allows ngerprints to be wiped o easily. Illuminated AC operation, capacity tracker, adjustable feet and feet, front level indicator and stability indicator
keys guide users through tasks, highlighting level, lock down and more. Density and specific make set up easy. It also includes an integral
available options. Featuring one of the largest gravity determination are easy with the below weigh-below hook.
LCD readouts in the industry, the Eclipse displays balance weighing feature, and the removable draft • Internal, rechargeable battery provides up to
sizeable white digits on a deep-blue background, shield eliminates wind disturbances outdoors or 210 hours of running time
ensuring ultimate visibility. A second line shows in drafty environments. ShockProtect™ provides • built-in carrying handle
text prompts, instructions and any other relevant overload protection, and the HandiCal™ internal See Chart below for Models and Specifications

Adam Eclipse High-Capacity Balances Standard Model With Control Pillar Description Part #
Cap. Readability Platform 120V 60Hz 220V 50/60Hz 120V 60Hz 220V 50/60Hz USB Interface kit HB-4730USB
12kg 0.1g 9.4 x 9.4" (240 x 240mm) HB-4943 HB-4943.4F HB-4943P HB-4943P.4F RS-232 Interface kit HB-4730CB
16kg 0.1g 9.4 x 9.4" (240 x 240mm) HB-4945 HB-4945.4F HB-4945P HB-4945P.4F
In-use Cover HB-4730UC
22kg 0.1g 12.2 x 14.8" (311 x 377mm) HB-4946 HB-4946.4F HB-4946P HB-4946P.4F
Weigh-below hook HB-4541B.2
32kg 0.1g 12.2 x 14.8" (311 x 377mm) HB-4947 HB-4947.4F HB-4947P HB-4947P.4F
Data capture software HB-4545B.3
™
Adam HCB Highland Precision Balances
Capacity Readability Pan Size 120V 220V Ship Wt.
300g 0.01g HB-4710A HB-4710A.4F Description Part #
600g 0.02g HB-4711A — USB Interface cable HB-4710CV
600g 0.01g HB-4712A HB-4712A.4F RS-232 Interface cable HB-4700CB
4.7” Dia. / 120mm 30lb/13.6kg
1000g 0.01g HB-4713A HB-4713A.4F
HCB Carrying Case HB-4710CS
1500g 0.05g HB-4714A HB-4714A.4F
3000g 0.1g HB-4715A HB-4715A.4F
Description Part #
Ohaus Ranger 3000 Compact Bench Scales
USB Interface kit HB-4730USB
Capacity Readability Pan Size 120V 60Hz 220V50/60Hz Ship Wt. RS-232 Interface cable HB-4730CB
3000g 0.1g HB-4730 HB-4730.4F In-use Cover HB-4730UC
6000g 0.2g 8.9" x 11.8" / HB-4731 HB-4731.4F
11 lb/4.98kg
15kg 0.5g 225 x 300mm HB-4732 HB-4732.4F
30kg 1g HB-4733 HB-4733.4F

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

308
Scales & Balances LABORATORY

HB-4532A HB-4533A HB-4960 HB-4951

Adam Core Balance Compact Portable Ohaus Navigator XL Portable Balance Ohaus Navigator XT Portable Balance
The CQT provides a low-cost solution for field Designed with two touchless sensors that free up The Navigator XT is designed with two touchless
and lab usage. Complete with removable draft your hands, allowing you to focus on handling sensors that free up your hands, allowing you to
shield, AC adapter, adjustable feet and level and samples and keeping the scale free from focus on handling samples and keeping the scale
an integral security bracket. Ready for use out of contaminants. The touch-free sensors control; tare, free from contaminants. The touch-free sensors
the box, the CQT balances can operate with 6 AA zero, print, function, and backlight to help minimize control; tare, zero, print, function, and backlight to
batteries and an optional carrying case is available. touching the keypad. The balance stabilizes in help minimize touching the keypad. The balance
Core balances include a removable draft shield less than one second to provide fast, accurate, stabilizes in less than one second to provide
helps when working on site where wind makes and repeatable weighing results, which improve fast, accurate, and repeatable weighing results,
accurate readings difficult, and is battery- operator efficiency and increasing productivity. which improve operator efficiency and increasing
powered with six AA batteries. Includes weigh- A bright backlit LCD display provides optimum productivity. A bright backlit LCD display provides
below hook. An optional carrying case is available visibility in any lighting condition, with large digits optimum visibility in any lighting condition, with
See Chart for Models and Specifications and indicators that make it fast and easy to read large digits and indicators that make it fast and easy
Adam 2600g Core Balance Field Kit the weighing results. The balance includes an to read the weighing results. The balance includes
Designed to provide a reliable field balance to take internal rechargeable battery that operates up to an internal rechargeable battery that operates up
the place of triple-beam balances. Balance comes 100 hours, allowing it to be transported and used to 100 hours, allowing it to be transported and
with a durable, hard case and a weigh-below hook. where a power outlet is not available. used where a power outlet is not available.
See Chart below for Models and Specifications See Chart below for Models and Specifications See Chart below for Models and Specifications

Adam Core Balance CQT Compact Portable

Capacity Readability 120V 60Hz 220V50/60Hz Repeatability Linearity Power Pan Size Ship Wt.
200g 0.01g HB-4528A HB-4528A.4F 0.01g ±0.02g 8 lb/3.6kg

250g 0.1g HB-4529A HB-4529A.4F 0.1g ±0.1g 4 lb/1.8kg

600g 0.1g HB-4530A HB-4530A.4F 0.1g ±0.1g 7 lb/3.1kg

AC / AA batteries 5.1" Dia. / 130mm
1500g 0.1g HB-4532A HB-4532A.4F 0.1g ±0.2g 7 lb/3.1kg

2000g 1g HB-4534A HB-4534A.4F 1g ±1g 6 lb/2.7kg

5000g 1g HB-4535A HB-4535A.4F 1g ±1g 3.7 lb/1.6kg

Capacity Readability 120V 60Hz 220V50/60Hz Repeatability Linearity Power Pan Size Ship Wt.
2600g* 0.1g HB-4533A HB-4533A.4F 0.1g ±0.2g AC / AA batteries 5.1" Dia. / 130mm 8.4 lb/3.8kg

*2600g, Model HB-4533A is sold with a hard case (see picture)— perfect for field use, great upgrade to triple beam balances.
Ohaus Navigator XL Portable Balances
Capacity Readability 120V 220V Repeatability Linearity Power Pan Size Ship Wt.
1100g 0.1g HB-4960 HB-4960.4F 0.02g ±0.02g
2100g 0.1g HB-4961 HB-4961.4F 0.04g ±0.04g
5100g 0.5g HB-4962 HB-4962.4F 0.02g ±0.02g AC / battery 7.6" x 8" / 194 x 203mm 10 lb/4.5kg
10000g 1g HB-4963 HB-4963.4F 0.02g ±0.02g
20000g 1g HB-4964 HB-4964.4F 0.1g ±0.1g

Ohaus Navigator XT Portable Balance

Capacity Readability 120V 220V Units Power Pan Size Ship Wt.
1600g 0.1g HB-4950 HB-4950.4F
3200g 0.2g HB-4951 HB-4951.4F
6400g 0.5g HB-4952 HB-4952.4F lb, oz, lb: oz, kg, g AC / rechargeable 9.00" x 6.90" / 250 x 240mm 30 lb/13.6kg
10000g 0.5g HB-4953 HB-4953.4F
16000g 1g HB-4954 HB-4954.4F

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 309
LABORATORY Scales & Balances

HB-4775A HB-4874 HB-4831

Adam CPWplus Portable Scales Adam ABK Portable Scales Ohaus Defender Bench Scales
The CPWplus line of industrial scales is one of Adam’s ABK portable scales are built tough The Defender 3000 feature a simple, yet rugged,
our most popular scales for materials testing and to deliver reliable performance and effortless tubular-frame design. They include an indicator
general field use. With a steel base, stainless steel weighing. Designed for rugged industrial with tactile keys, backlit LCD display, built-in
weighing pan, flexible remote indicator and splash- applications, a sleek, stainless steel indicator with rechargeable battery operation and flexible
proof keypad, the CPWplus can handle harsh superior sealing protects from dust, ensuring mounting capabilities. These scales provide
messy applications easily. The RS232 interface, AC longevity. The scale's large, backlit display is vivid multiple weighing units: lb, oz, lb: oz, kg, g.
adapter and wall-mount bracket make it a versatile and easy-to-read, helping to streamline activities Standard features of the Defender bench scales
solution for lab and field work. Uses 6 AA batteries. and reduce errors in data entry. Built-in limit include: 304 stainless steel pan with painted carbon
Optional carrying case (HB-4775C) available for lights make the ABK ideal for check weighing; steel frame and aluminum IP67 load cell; Indicator
ease of portability. The CPWplus includes a large the indicator shows when you are below your features a high-impact durable ABS housing with
backlit LCD display on a flexible remote indicator; desired weight, at your required weight, or above reversible face for either wall, column or table-top
RS232 bi-directional interface; Hold function your weight, and an audible alarm assists to mounting; Adjustable non-slip rubber leveling feet
freezes reading; 9V adapter (included) or six AA give a secondary notification. Features include: with externally visible level indicator; 1-in/25mm
batteries, and steel base, stainless weighing pan Display hold function; stainless steel platform and high LCD weight display with high-contrast
and splash-proof keypad indicator; RS232 data output, and rechargeable backlight; Built-in RS232 for printing and data
See Chart below for Models and Specifications battery life of up to 90 hrs. connection; AC adapter and internal rechargeable
See Chart below for Models and Specifications battery.
Description Part # See Chart below for Models and Specifications
CBWplus hard carrying case HB-4775C
Description Part #
Rechargeable battery kit HB-4931RB

Adam CPWplus Portable Scales

Capacity Readability Model Model Repeatability Power Pan Size Ship Wt.
75lb./35kg 0.02lb/.01kg HB-4774 HB-4774.4F 0.02lb/.01kg
165lb./75kg 0.05lb/.02kg HB-4775A HB-4775A.4F 0.05lb/.02kg
AC / AA batteries 12" sq / 300mm sq. 10.8 lb / 4.89 kg
330lb./150kg 0.1lb/.05kg HB-4776 HB-4776.4F 0.1lb/.05kg
440lb./200kg 0.1lb/.05kg HB-4777 HB-4777.4F 0.1lb/.05kg

Adam ABK Portable Scales

Capacity Readability Model Model Power Pan Size Ship Wt.
35lb. / 16kg 0.001lb / .5g HB-4874 HB-4874.4F
70lb / 32kg 0.002lb / 1g HB-4875 HB-4875.4F
AC / battery 11.8" X 15.7" / 300mm X 400mm 20 lb / 9 kg
130lb / 60kg 0.005lb / 2g HB-4876 HB-4876.4F
260lb / 120kg 0.01lb / 5g HB-4877 HB-4877.4F

Ohaus Defender 3000 Bench Scale

Capacity Readability Model Model Power Pan Size Ship Wt.
66lb. / 30kg 0.01lb / .005kg HB-4830 HB-4830.4F 33 lb / 15 kg
12" X 14" / 30.5mm X 35.5mm
132lb / 60kg 0.02lb / 10g HB-4831 HB-4831.4F 33 lb / 15 kg
AC / C batteries
330lb / 150kg 0.05lb / 20g HB-4832 HB-4832.4F
19.7" X 25.6" / 500mm X 650mm 60 lb / 27.2 kg
660lb / 300kg 0.1lb / 50g HB-4833 HB-4833.4F

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

310
Scales & Balances LABORATORY

HB-4931 HB-4772 HB-4770 HB-4635A

Ohaus Low-Profile Defender Bench Scales Ohaus ES Bench Scale Adam CBK Bench Scale
The OHAUS Defender 5000 series low-profile scales The Ohaus ES Low profile bench scale Repetitive weighing tasks are fast and simple with
are a feature-rich line of bench scales, combining brings utility and economy together. Easy, two- a large stainless steel platform, backlit display,
an ABS plastic indicator with painted steel bases button operation and a large display guarantee and a graphic capacity tracker to show how much
and mounting brackets. The Defender 5000 offers accurate and unmistakable results. The unique weighing range is used or available. Amber,
a multi-functional indicator with multiple weighing 3-way mounting bracket allows you to mount green and red indicators make check weighing
units (kg, g, lb, oz, lb: oz (decimal), metric tonnes the indicator to the scale base, above the scale applications trouble free and quickly show
and a user-definable unit) and software modes to platform, or on any vertical surface. For simple operators if a sample is under or over the preset
meet your requirements. Standard features Include: weighing at a favorable cost, this scale is the one limits. The CBK includes features like a RS232
painted steel bases with ABS indicator; quick display to choose. interface, date & time, a built-in rechargeable
of results using large LCD with high-contrast white Features: auto-zero tracking; large platform battery pack and AC adapter, to make it ideal for
backlight; easy- to-operate with 4-key membrane with leveling feet; battery saving auto-off timer, production, warehousing or even in the field.
keypad with raised tactile keys; Weighs in one or (after 5 minutes of inactivity); large backlit LCD Features: Large backlit LCD with capacity tracker;
more units: kg, g, lb, oz, lb: oz (decimal), metric display on flexible remote indicator; RS232 Colored LED check limit indicators; Stainless
tonnes and user-definable custom unit; Internal bi-directional interface; hold function freezes steel pan; 5 weighing units (g, Kg, lb, oz, lb;oz);
power supply with universal line cord or 6 C batteries reading; steel base, stainless weighing pan Rechargeable battery; RS-232 interface with multi-
(80 hr. battery life), and base and indicator connected and splash-proof keypad. language, date and time output.
using quick connect plug.
Ohaus ES Bench Scale See Chart below Adam CBK Bench Scale See Chart below
See Chart below for Models and Specifications Ship wt. See Table Ship wt. See Table

In-Use Cover HB-4636CV

Description Part # Ship wt. 5lbs. (2.2kg)
Rechargeable Battery Kit HB-4931RB Hard Case for CBK Scales HB-4635C
Ship wt. 9lbs. (4.0kg)
Ohaus Defender 5000 Low Profile Bench Scale
Capacity Readability Model Model Power Pan Size Ship Wt.
60lb. / 30kg 0.005lb / 2g HB-4930 HB-4930.4F 60 lb / 27.2 kg
12" X 14" / 30.5mm X 35.5mm
150lb / 60kg 0.01lb / 5g HB-4931 HB-4931.4F 30.9 lb / 10.7 kg

250lb / 100kg 0.02lb / 10g HB-4932 HB-4932.4F AC / C batteries 15.7" X 19.7" / 400mm X 500mm 30 lb / 13.6 kg

300lb / 150kg 0.02lb / 10g HB-4933 HB-4933.4F 16.5" X 21.7" / 420mm X 550mm 30 lb / 13.6 kg

600lb / 300kg 0.05lb / 20g HB-4934 HB-4934.4F 17" X 22" / 42mm X 55mm 30 lb / 13.6 kg

Ohaus ES Bench Scale

Capacity Readability Model Model Power Units Pan Size Ship Wt.
110lb./50kg 0.05lb/0.02kg HB-4770 HB-4770.4F lb, oz, kg, lb: oz 12.2 x 10.8 in. / 310 x 270mm 35 lb / 16 kg

110lb./50kg 0.05lb/0.02kg HB-4769 HB-4769.4F lb, oz, kg, lb: oz

AC / AA batteries
220lb./100kg 0.1lb/0.05kg HB-4771 HB-4771.4F lb, oz, kg, lb: oz 20.5 x 15.7 in. / 520 x 400mm 35 lb / 16 kg

440lb./200kg 0.2lb/0.1kg HB-4772 HB-4772.4F lb, oz, kg

Adam CBK Bench Scale

Capacity Readability Model Model Repeatability Power Pan Size Ship Wt.
8lb./4kg 0.0002lb/0.1g HB-4644 HB-4644.4F 0.0002lb/0.1g AC / battery 8.9" x 10.8" (225 x 275mm) 5 lb / 2.2 kg

35lb./16kg 0.001lb/0.5g HB-4636A HB-4636A.4F 0.001lb/.5g

70lb./32kg 0.002lb/1g HB-4635A HB-4635A.4F 0.002lb/1g AC / battery 8.9" x 10.8" (225 x 275mm) 10.9 lb / 5.3 kg

100lb./48kg 0.005lb/2g HB-4634A HB-4634A.4F 0.005lb/2g

Weigh-Below Models
35lb./16kg 0.001lb/0.5g HB-4636AWB HB-4636AWB.4F 0.001lb/.5g
70lb./32kg 0.002lb/1g HB-4635AWB HB-4635AWB.4F 0.002lb/1g AC / battery 8.9" x 10.8" (225 x 275mm) 15 lb / 6.8 kg

100lb./48kg 0.005lb/2g HB-4634AWB HB-4634AWB.4F 0.005lb/2g

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 311
LABORATORY Mechanical Balances

H-4825 H-4604 H-4605

H-4830

H-4835

H-4739

H-4660 H-4785

Ohaus Cent-O-Gram and Dial-O-Gram Scales Ohaus Mechanical Balance, 2610g Ohaus Heavy-Duty, Field Test Scale
Quality, high-precision overhead mechanical This Ohaus 700 series balance comes with a 12" The field test scale is a very compact design and
balances, the Ohaus Cent-O-Gram and Dial- x 6" x 3" stainless steel scoop platform. Standard provides accurate weighings of a wide variety of
O-Gram overhead balances offer the accuracy features include: Faster stability— three times heavy materials, even under the most adverse
and convenience of an integrated weigh-below faster stability reading than any other three-beam conditions. The large, 10" diameter, epoxy-coated
balance while allowing students to visualize mass balance on the market; and, greater accuracy— steel, stabilized pan will hold oversized samples
measurement principles. Designed with a hanging outstanding beam quality allows for smooth without tipping, and the weighted base keeps the
pan system, both balances offer 10 times the positioning of the poise. Balance has a 2610g entire scale rock steady. Two models are available:
readability of the Ohaus Triple Beam and Dial-O- capacity and a readability of 0.1g and it features a 16kg with a readability of 5g and a 36lb model with
Gram top-loading balances. The Vernier dial on H-4609 weight set (Ohaus 750-SW/707). a readability of 0.01lb. Includes a set of slotted
the Dial-O-Gram 310 replaces two of the beams 2610g Mechanical Balance, Scoop Platform H-4605 weights, stored in the base.
and is a great time saver. Both models provide Ship wt. 9lbs. (4kg) Ohaus Heavy Duty, Field Scale, English H-4660
0.01g readability and a 3.5" diameter x 5" deep, Ohaus Dial-O-Gram Balance, 2610g Ohaus Heavy Duty, Field Scale, Metric H-4665
stainless steel pan. The Ohaus Dial-O-Gram series combines the Ship wt. 22lbs. (9.9kg)

Cent-O-Gram, 311g H-4825 convenience of direct-reading dial calibration with Ohaus Heavy-Duty, Solution Balance
Dial-O-Gram, 310g H-4830 the speed of magnetic damping for a balance The Ohaus heavy-duty solution balance is a
Ship wt. 15lbs. (6.8kg) that accurately and quickly weighs everything. dual-beam mechanical balance with a maximum
Ohaus Mechanical Balances, 2610g Standard features include: Faster stability— capacity of 20 kilograms and a readability of 1
The Ohaus 700 sSeries accommodates a large three times faster stability reading than any other gram. A dual-faced Indicator plate allows front
range of laboratory applications. Standard features three-beam balance on the market; and, greater and rear weighing. The base and beam are
include: Faster stability— three times faster stability accuracy— outstanding beam quality allows for constructed of cast aluminum and finished with a
reading than any other three-beam balance on smooth positioning of the poise. Balance has a durable epoxy powder coating. A large lockable
the market; and, greater accuracy— outstanding 2610g capacity and a readability of 0.1g; with a tare (2270g) and magnetic damping speeds up the
beam quality allows for smooth positioning of the tare of 225g, plus it features a H-4609 weight set weighing process. Readings up to 1100 grams may
poise. Include weight sets. All of these balances (Ohaus 750-SW/707). be taken directly off the two beams and the slotted
have a 2610g capacity and a readability of 0.1g. 2610g Dial-O-Gram Mechanical Balance H-4835 mass set provided extends the weighing capacity
They both feature the H-4609 weight set (Ohaus Ship wt. 14lbs. (6.35kg) to 20 kilograms. Features an 11" diameter stainless
750-SW/707) and a 6" diameter stainless steel Ohaus Triple, Pro Mechanical Balance steel platform.
platform. The Triple Pro features 2610g capacity and 0.1g Ohaus Heavy Duty, Solution Balance H-4785
readability. Balance has integral covered mass Ship wt. 41lbs. (18.95kg)
2610g Mechanical Balance H-4603
2610g Mechanical Balance, 225g Tare H-4604 storage, including weight set and built in handle
Ship wt. 12lbs. (5.4kg) for ease of use. Balance also features a storage lock
to protect balance when not in use and a spring-
loaded zero adjust compensator. Includes rod and
clamp for fast set up of weigh-below applications
like specific gravity.
Ohaus Triple, Pro Mechanical Balance H-4739
Ship wt. 12lbs. (5.4kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

312
Scales & Balances LABORATORY

H-4660.10 H-4609 H-21170

H-4621

H-4480A H-4490

H-4615P

H-4615S H-4603CC H-4732

Field Scale Replacement Weights Steel Carrying Case Portable Bench Platform Scale
Set includes: (1) 1lb; (2) 2 lb; (2) 5 lb, and (2) 10lb. Carrying case for mechanical balances. Compact, self-contained scale is designed for
(Can only be used with H-4660, not calibration Steel Carrying Case H-4603CC rugged use, ideal for location or lab applications
weights.) Ship wt. 10lbs. (4.5.4kg) where scale can take a pounding. Complete with
Field Scale Weights (avoirdupois) See chart below Dust Cover carrying handle, which doubles as a beam guard
Ship wt. 22lbs. (10kg) Vinyl dust cover for mechanical balances. and allows convenient hanging from wall brackets,
Field Scale Replacement Weights (Metric) Dust Cover H-4603C freeing bench and counter space. Weighs in lbs.
Set includes: (1) 500g; (1) 1 kg; (2) 2 kg, and (2) 5 Ship wt. 2lbs. (.9kg) only. 131 lbs capacity, Top: 125 lbs by 5 lbs; Left:
kg. (Can only be used with H-4665, not calibration Spring Scale, Circular 5 lbs x 1 oz; Right: 1 lb x 0.01 lb; Tare Bar: 0-10
weights.) For field soil tests in mechanical analysis of lbs. Metric version weighs in kg only. 52kg capacity,
Field Scale Weights (metric) See chart below aggregates, scale has 110 lb (50kg) x 8oz (200g). Top: 50kg by 2kg; Left: 0-2 kg blank tare; Right:
Ship wt. 22lbs. (10kg) 2 kg x 0.01kg. The H-4732 is constructed of steel
capacity. For direct reading, loose pointer can be
Individual Weights set to any position on the 8" (203mm) dia. dial with and cast aluminum with adjustable hardened steel
Weight Model Weight Model thumbscrew. Overall dimensions: 8" x 1.625" x 16" pivots and self-aligning steel bearings. The built-in
1 lb. H-4660.1 500g H-4665.1 (203 x 41 x 406mm) platform and steel locking mechanism ensure safe,
secure operation and portability. Also features a
2 lb. H-4660.2 1kg H-4665.2 Spring Scale H-4480A
Ship wt. 4lbs. (1.7kg) stainless steel poise rail, the beams are mounted
5 lb. H-4660.5 2kg H-4665.3
Spring Scale, Vertical below the platform, allowing unrestricted visibility
10 lb. H-4660.10 5kg H-4665.4 when weighing. Beam balance indicator ensures
Heavy-duty spring balance for batch weighings
Polypropylene Scoop and Counterweight correct reading. Main frame has rubber cushion
with reliable accuracy and 70 lb (32kg) x 1lb (500g).
Polypropylene scoop and counterweight. Ohaus # mounting for protection. Platform: 12" x 17" (305
capacity. Easy-to-read recessed gauge has deep-
703-00. x 432mm).
etched graduations. Adjustable indicator is set to
Polypropylene Scoop and Counterweight H-4615P zero for taring. Overall dimensions: 2" x 1.75" x 11" Portable Bench Platform Scale H-4732
Ship wt. 11lbs. (4.9kg) (51 x 45 x 279mm). Portable Bench Platform Scale (metric) H-4732M
Ship wt. 32lbs. (14.5kg)
Stainless Scoop and Counterweight Spring Scale, Vertical H-4490A
Stainless steel scoop and counterweight. Ohaus # Ship wt. 8lbs. (3.6kg) Scale Cover, Stainless Steel
703-SO. Suspension Scale, Digital Readout (US/metric) Cover for use with H-4732 and H-4732M scales.
Stainless Scoop and Counterweight H-4615S High accuracy, compact digital hanging scale Scale Cover, Stainless Steel H-4732SC
Ship wt. 2lbs. (.9kg) Ship wt. 20lbs. (9.1kg)
uses a 12-bit A/D converter for accuracy ± 0.1%
Under-Balance Weighing Kit Portable Bench Platform Scale, Heavy-Capacity
of applied load. Capacity is 250lb (113.4kg) with
Rod and clamp assembly for doing under-balance a resolution of .01lb (.01kg) and a ±.01% accuracy. Heavier capacity model of the H-4732 above.
weighing with Ohaus mechanical balances. Ohaus Weatherproof ABS plastic case assures maximum Weighs in lbs. only. 260 lbs capacity, Top: 250
#183-00. protection against moisture, dust and rough lbs by 10 lbs; Left: 5 lbs x 1 oz; Right: 5 lbs x 0.1
Under-Balance Weighing Kit H- 21170 usage. High visibility, 0.5" high LCD digital readout lb; Tare Bar: 0-25 lbs. Complete with carrying
Ship wt. 3.2lbs. (1.4kg) handle, which doubles as a beam guard and allows
provides easy reading of weights. Membrane
Weight Set Replacement push button switches allow simple trouble-free convenient hanging from wall brackets, freeing
Replacement weight set for mechanical balances. operation. Power is supplied by (1) 9-volt alkaline bench and counter space.
Include (2) 1000g and (1) 500g weight. battery (not included). Peak hold, stainless steel Portable Bench Scale, Heavy-Capacity H-4748A
Ship wt. 35lbs. (15.8kg)
Weight Set Replacement H-4609 hooks. Function keys for zero, lb/kg, on/off. Overall
Ship wt. 3lbs. (1.2kg) case size 3.75" W x 2" D x 6"H.
Suspension Scale, Digital Readout H-4621
Ship wt. 4.7lbs. (2.1kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 313
LABORATORY Balance Calibration Weights

H-4886SS H-4889.250KG

Electronic Balance Calibration Weights, Individual All ANSI/ASTM E617 class weights meet or exceed requiring high accuracy. These sets are available
Stainless steel electronic balance calibration specifications for tolerance, construction, surface with an accuracy certificate, or a traceable
weights are available in ASTM classes 1 and 4 in finish, and magnetism as outlined in ANSI/ASTM certificate. These sets include a convenient holder
sizes ranging from 10g to 30kg. Class 1 weights are E617. Weights 5kg and below are supplied in for the set. All ANSI/ASTM E617 class weights
for analytical balances and applications requiring protective cases. meet or exceed specifications for tolerance,
high accuracy while Class 4 weights are typically See Chart for Below construction, surface finish, and magnetism as
used for balances less sensitive than 0.01g. Weights outlined in ANSI/ASTM E617.
Calibration Weight Sets
are available in a cylindrical design up to 5kg and a See Chart for Below
Stainless steel calibration weight sets are available
stackable grip-handle design from 5kg to 30kg for
in ASTM class 1 with a 2100g capacity. Class 1 Calibration Weights, Individual
all necessary testing, calibration and adjustment. Individual stainless steel, heavy-capacity weights
weights are for analytical balances and applications
are an ideal solution for the calibration of large
Electronic Balance Calibration Weights, Individual, Stainless Steel capacity scales.
ASTM Class 1 ASTM Class 4 See Chart for Below

Traceable
Weight Std. Weight Traceable Cert Std. Weight Calibration Weights, Sets, Stainless Steel
Cert.
30 kg H-4888.30KG H-4888.30KGT H-4889.30KG H-4889.30KGT Model Description
Stainless steel electronic balance calibration weight set: 2100g
25 kg H-4888.25KG H-4888.25KGT H-4889.25KG H-4889.25KGT H-4888WS capacity: 1kg, 500g, 300g, 200g, 100g, ASTM class 1 w/ accuracy
24 kg H-4888.24KG H-4888.24KGT H-4889.24KG H-4889.24KGT certificate
Stainless steel electronic balance calibration weight set: 2100g
20 kg H-4888.20KG H-4888.20KGT H-4889.20KG H-4889.20KGT
H-4888WST capacity: 1kg, 500g, 300g, 200g, 100g, ASTM class 1 w/ traceable
16 kg H-4888.16KG H-4888.16KGT H-4889.16KG H-4889.16KGT certificate
10 kg H-4888.10KG H-4888.10KGT H-4889.10KG H-4889.10KGT Metric economical stainless steel weight set: 2010g capacity: 1kg,
H-4886SS 500g, 200g, (2) 100g, 50g, 20g, (2) 10g, 5g, (2) 2g, 1g w/ accuracy
8 kg H-4888.8KG H-4888.8KGT H-4889.8KG H-4889.8KGT
certificate
5 kg H-4888.5KG H-4888.5KGT H-4889.5KG H-4889.5KGT Metric economical stainless steel weight set: 2010g capacity: 1kg,
H-4886SSC 500g, 200g, (2) 100g, 50g, 20g, (2) 10g, 5g, (2) 2g, 1g w/ traceable
4 kg H-4888.4KG H-4888.4KGT H-4889.4KG H-4889.4KGT
certificate
3 kg H-4888.3KG H-4888.3KGT H-4889.3KG H-4889.3KGT Metric economical stainless steel weight set: 4110g capacity:
2 kg H-4888.2KG H-4888.2KGT H-4889.2KG H-4889.2KGT H-4887SS 2000g, 1000g, 500g, (2) 200g, 100g, 50g, (2) 20g, 10g, 5g, (2) 2g,
1g. w/ accuracy certificate
1.5 kg H-4888.15KG H-4888.15KGT H-4889.15KG H-4889.15KGT
Metric economical stainless steel weight set: 4110g capacity: 2000g, 1000g, 500g,
H-4887SST
1 kg H-4888.1KG H-4888.1KGT H-4889.1KG H-4889.1KGT (2) 200g, 100g, 50g, (2) 20g, 10g, 5g, (2) 2g, 1g. w/ traceable certificate

600 g H-4888.600G H-4888.600GT H-4889.600G H-4889.600GT

Heavy-Capacity, Stainless Steel Calibration Weights
500 kg H-4888.500G H-4888.500GT H-4889.500G H-4889.500GT
ASTM Class 4
400 g H-4888.400G H-4888.400GT H-4889.400G H-4889.400GT
Weight Standard weight with traceable certificate
300 g H-4888.300G H-4888.300GT H-4889.300G H-4889.300GT
250kg H-4889.250KG H-4889.250KGT
200 g H-4888.200G H-4888.200GT H-4889.200G H-4889.200GT
200kg H-4889.200KG H-4889.200KGT
160 g H-4888.160G H-4888.160GT H-4889.160G H-4889.160GT
180kg H-4889.180KG H-4889.180KGT
150 g H-4888.150G H-4888.150GT H-4889.150G H-4889.150GT
150kg H-4889.150KG H-4889.150KGT
100 g H-4888.100G H-4888.100GT H-4889.100G H-4889.100GT
100kg H-4889.100KG H-4889.100KGT
80 g H-4888.80G H-4888.80GT H-4889.80G H-4889.80GT
80kg H-4889.80KG H-4889.80KGT
70 g H-4888.70G H-4888.70GT H-4889.70G H-4889.70GT
75kg H-4889.75KG H-4889.75KGT
60 g H-4888.60G H-4888.60GT H-4889.60G H-4889.60GT
60kg H-4889.60KG H-4889.60KGT
50 g H-4888.50G H-4888.50GT H-4889.50G H-4889.50GT
50kg H-4889.50KG H-4889.50KGT
40 g H-4888.40G H-4888.40GT H-4889.40G H-4889.40GT
40kg H-4889.40KG H-4889.40KGT
30 g H-4888.30G H-4888.30GT H-4889.30G H-4889.30GT
20 kg H-4888.20G H-4888.20GT H-4889.20G H-4889.20GT
10 g H-4888.10G H-4888.10GT H-4889.10G H-4889.10GT

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

314
Lab Ovens LABORATORY
Laboratory Ovens
Quality fan-forced circulation or gravity-convection
ovens feature double-wall construction and heavy,
welded-steel exterior. Work space is insulated
from the outer cabinet with one inch of high-
density mineral wool, and interiors are made of
corrosive-resistant aluminized steel. Low-watt
density incoloy-sheathed elements are used.
Include automatic thermo control, pilot light heat
indicator and either a top-mounted, mercury-
free thermometer (0°-300°C) on the gravity
convection models or a door-mounted, dial H-30105
thermometer on the forced air models. All ovens
come with two, adjustable shelves and a 6 ft., 3-wire
power cord and grounded plug. Units also have
scratch-proof rubber feet, full-length piano-hinged
door and extruded thermoplastic door handle.

See Chart for Models and Specifications H-30128 H-30100

Laboratory Ovens – Forced Air

Model Max. Temp. Description Electric Dimensions (W x D x H)
H-30105 0.6 cu. ft. (17L) capacity. Features bi-metal 115V, 60 Hz.
450°F Inside: 12" x 10" x 8.25" (305 x 254 x 210mm)
temperature controller, ±2° sensitivity. 800
H-30105.4F (232°C) 230V, 50/60 Hz. Overall: 14" x 12.3" x 20.5" (356 x 305 x 521mm)
watts. Shipping wt. 49 lbs. (22.2kg)
H-30115 1.14 cu. ft. (32.3L) capacity. Features hydraulic 115V, 60 Hz.
450°F Inside: 13" x 13" x 11.6" (330 x 330 x 295mm)
temperature controller, ±1° sensitivity. 1050
H-30115.4F (232°C) 230V, 50/60 Hz. Overall: 15" x 15" x 24.5" (381 x 381 x 622mm)
watts. Shipping wt. 70 lbs. (31.7kg)
H-30125 1.83 cu. ft. (51.8L) capacity. Features hydraulic 115V, 60 Hz.
450°F Inside: 18" x 12" x 14.6" (457 x 305 x 371mm)
temperature controller, ±1° sensitivity. 1500
H-30125.4F (232°C) 230V, 50/60 Hz. Overall: 20" x 14" x 28.5" (508 x 356 x 724mm)
watts. Shipping wt. 82 lbs. (31.7kg)
H-30131 2.86 cu. ft. (81L) capacity. Features hydraulic 115V, 60 Hz.
450°F Inside: 18" x 14" x 19.8" (457 x 356 x 503mm)
temperature controller, ±1° sensitivity. 1500
H-30131.4F (232°C) 230V, 50/60 Hz. Overall: 20" x 16.3" x 35" (508 x 414 x 890mm)
watts. Shipping wt. 98 lbs. (44.5kg)

Laboratory Ovens – Gravity Convection

Model Max. Temp. Description Electric Dimensions (W x D x H)

H-30100 0.7 cu. ft. (19.8L) capacity. Features bi-metal 115V, 60 Hz.
450°F Inside: 12" x 10" x 10" (305 x 254 x 254mm)
temperature controller, ±2° sensitivity. 600
H-30100.4F (232°C) 230V, 50/60 Hz. Overall: 14" x 12.3" x 17.5" (356 x 312 x 445mm)
watts. Shipping wt. 44 lbs. (20kg)
H-30110 1.27 cu. ft. (36L) capacity. Features hydraulic 115V, 60 Hz.
450°F Inside: 13" x 13" x 13" (330 x 330 x 330mm)
temperature controller, ±1° sensitivity. 750
H-30110.4F (232°C) 230V, 50/60 Hz. Overall: 15" x 15.3" x 21.5" (380 x 389 x 546mm)
watts. Shipping wt. 58 lbs. (26.3kg)
H-30120 2.0 cu. ft. (56.6L) capacity. Features hydraulic 115V, 60 Hz.
450°F Inside: 18" x 12" x 15.6" (457 x 305 x 396mm)
temperature controller, ±1° sensitivity. 1200
H-30120.4F (232°C) 230V, 50/60 Hz. Overall: 20" x 14.3" x 25.5" (508 x 362 x 6485mm)
watts. Shipping wt. 78 lbs. (35kg)
H-30128 3.0 cu. ft. (85L) capacity. Features hydraulic 115V, 60 Hz.
450°F Inside: 18" x 14" x 21.8" (457 x 356 x 554mm)
temperature controller, ±1° sensitivity.
H-30128.4F (232°C) 230V, 50/60 Hz. Overall: 20" x 16.3" x 31.5" (508 x 414 x 800mm)
Shipping wt. 148 lbs. (67.1kg)

230V Models do not have wire plug

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 315
LABORATORY Lab Ovens
Laboratory Ovens with Digital Control
These laboratory ovens feature the same durable,
quality construction as the ovens on the previous
page while offering easy temperature control
and the stability of a full, PID microprocessor,
which accurately maintains settings within ±
1°F (0.5°C), even in varying ambient or power
supply conditions. This feature helps to confirm
temperature stability or indicate any control
malfunction or power loss throughout a process
period. The digital controller features large, easy-
to-read LED numbers that continuously display set
temperature and process temperature, as well as a H-30100E
setting lock mode that provides protection against
accidental or inadvertent adjustments.
Features Advanced Design
• Digital Microprocessor Control Cabinets are as attractive as they are durable.
• Forced air or Gravity Convection Designs Exteriors are painted light gray and Heating Elements
• Durable, Double-wall Construction with Scratch- have a hard, scratch-resistant hammer finish. Energy-efficient, low-watt density, incoloy sheathed
resistant, Hammer Finish Doors open with high-impact thermoplastic elements are engineered into a compact design
• Corrosion-resistant Aluminized Interior handles. Cabinets have heavy steel double-wall for quick run-up and recovery times. Temperature
construction. Work space is insulated from the uniformity is greatly improved by a perforated heat
• Quality UL- and CSA-recognized components in
outer cabinet with one inch of high-density mineral shield which absorbs radiant heat and distributes it
all ovens.
wool, and interiors are made of corrosion-resistant more evenly throughout the product chamber.
aluminized steel. See Chart for Models and Specification
Laboratory Ovens – Forced Air with Digital Control
Model Max. Temp. Description Electric Dimensions (W x D x H)
H-30105E 450°F 0.7 cu. ft. (19.8L) capacity. Features bi-metal 115V, 60 Hz. Inside: 12" x 10" x 10" (305 x 254 x 254mm)
temperature controller, ±2° sensitivity. 600
H-30105E.4F (232°C) watts. Shipping wt. 49 lbs. (22.2kg) 230V, 50/60 Hz. Overall: 14" x 12.3" x 17.5" (356 x 312 x 445mm)

H-30115E 1.27 cu. ft. (36L) capacity. Features hydraulic 115V, 60 Hz. Inside: 13" x 13" x 13" (330 x 330 x 330mm)
450°F
temperature controller, ±1° sensitivity. 750
H-30115E.4F (232°C) watts. Shipping wt. 70 lbs. (31.7kg) 230V, 50/60 Hz. Overall: 15" x 15.3" x 21.5" (381 x 389 x 546mm)

H-30125E 450°F 2.0 cu. ft. (56.6L) capacity. Features hydraulic 115V, 60 Hz. Inside: 18" x 12" x 15.6" (457 x 305 x 396mm)
temperature controller, ±1° sensitivity. 1200
H-30125E.4F (232°C) watts. Shipping wt. 82 lbs. (31.7kg) 230V, 50/60 Hz. Overall: 20" x 14.3" x 25.5" (508 x 362 x 648mm)

H-30131E 450°F 3.0 cu. ft. (85L) capacity. Features hydraulic 115V, 60 Hz. Inside: 18" x 14" x 21.8" (457 x 356 x 554mm)
temperature controller, ±1° sensitivity. 1500
H-30131E.4F (232°C) 230V, 50/60 Hz. Overall: 20" x 16.3" x 31.5" (508 x 414 x 800mm)
watts. Shipping wt. 98 lbs. (44.5kg)

Laboratory Ovens – Gravity Convection with Digital Control

Model Max. Temp. Description Electric Dimensions (W x D x H)

H-30100E 450°F 0.6 cu. ft. (17L) capacity. Features bi-metal 115V, 60 Hz. Inside: 12" x 10" x 8.25" (305 x 254 x 210mm)
temperature controller, ±2° sensitivity. 800 watts
H-30100E.4F (232°C) Shipping wt. 44 lbs. (20kg) 230V, 50/60 Hz. Overall: 14" x 12.3" x 20.5" (356 x 312 x 520mm)

H-30110E 450°F 1.14 cu. ft. (32.3L) capacity. Features hydraulic 115V, 60 Hz. Inside: 13" x 13" x 11" (330 x 330 x 280mm)
temperature controller, ±1° sensitivity. 1050
H-30110E.4F (232°C) watts Shipping wt. 58 lbs. (26.3kg) 230V, 50/60 Hz. Overall: 15" x 15.3" x 25" (380 x 389 x 635mm)

H-30120E 450°F 1.83 cu. ft. (51.8L) capacity. Features hydraulic 115V, 60 Hz. Inside: 18" x 12" x 14.2" (457 x 305 x 360mm)
temperature controller, ±1° sensitivity. 1500
H-30120E.4F (232°C) watts Shipping wt. 78 lbs. (35kg) 230V, 50/60 Hz. Overall: 20" x 14.3" x 29" (508 x 362 x 737mm)

H-30128E 450°F 2.86 cu. ft. (81L) capacity. Features hydraulic 115V, 60 Hz. Inside: 18" x 14" x 19.8" (457 x 356 x 503mm)
temperature controller, ±1° sensitivity. 1500
H-30128E.4F (232°C) watts Shipping wt. 148 lbs. (67.1kg) 230V, 50/60 Hz. Overall: 20" x 16.3" x 35" (508 x 414 x 890mm)

230V Models do not have wire plug

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

316
Bench Ovens LABORATORY

H-30145 H-30145E with E-Series Digital Control

Laboratory Bench Ovens Laboratory Bench Ovens, Digital-Series chrome-plated wire shelves, which can support 80
These forced-air, convection ovens feature The Digital Series ovens take the standard forced- lbs. (36kg). Additional shelves can be added.
double-wall, steel construction, which provides air, convection ovens and add a PID microprocessor See Chart for Models and Specifications
reliable, even work-space temperature for testing controller with a digital display to provide greater
uniformity, repeatability and resolution of heating
applications. The ovens are constructed of Laboratory Bench Ovens, Accessories
operations. The precise micro-processor and the
corrosion-resistant, aluminized steel interiors and
J-type thermocouple holds set temperatures Description Part #
exteriors coated in an exclusive "high-tech" bronze accurately to ±1°F or C with improved chamber
polyester finish. The large, high-impact thermal temperature uniformity. Control features include Shelf and Supports for all models H-30145S
plastic door handles provide durability and remain large, easy-to-read dual LED display, which shows Exhaust Kit, 3" Pipe H-30181
cool-to-the-touch during operation. Ovens come both the set and process temperatures at a glance.
Floor Stand for all models H-30150
with (2) heavy-duty, chrome-plated wire shelves, The ovens are constructed of corrosion-resistant,
which can support 80 lbs. (36kg). Additional aluminized steel interiors and exteriors coated in an Cabinet with 2 Slide-out Shelves H-30155
shelves can be added. Ovens can accommodate exclusive "high-tech" bronze polyester finish. The
up to 11 shelves (17 for the H-30135 models), large, high-impact thermal plastic door handles
which can be adjusted to 1.5" center increments. provide durability and remain cool-to-the-touch
during operation. Ovens come with (2) heavy-duty,
See Chart for Models and Specifications

Model Max. temp. Description Dimensions (W x D x H)

7 cu. ft. (198L) capacity. Features calibrated dial-type temperature con-

H-30140
troller, 115V, 60 Hz, 1050 watts, 9.2 amps, Shipping wt. 185 lbs. (84kg)
300°F Inside: 25.5" x 24" x 20" (648 x 610 x 508mm)
H-30140.4F 230V, 50/60Hz version of H-30140
(149°C) Overall: 33" x 35.5' x 24" (838 x 902 x 610mm)
H-30140E E-series digital control version of H-30140
H-30140E.4F 230V, 50/60Hz version of H-30140E
7 cu. ft. (198L) capacity. Features calibrated dial-type temperature con-
H-30145
troller, 115V, 60 Hz, 1920 watts, 16amps. Shipping wt. 185 lbs. (84kg)
H-30145.4F 450°F 230V, 50/60Hz version of H-30145 Inside: 25.5" x 24" x 20" (648 x 610 x 508mm)
(232°C) Overall: 33" x 35.5" x 24" (838 x 902 x 610mm)
H-30145E E-Series digital control version of H-30145
H-30145E.4F 230V, 50/60Hz version of H-30145E
10.6 cu. ft. (300L) capacity. Features calibrated dial-type temperature
H-30135 controller, 115V, 60 Hz. 1920 watts, 16 amps. Uses 20 amp grounded
plug. Shipping wt.225 lbs (102kg)
450°F Inside: 25.5" x 24" x 30" (648 x 610 x 762mm)
H-30135.4F (232°C) 230V, 50/60Hz version of H-30135 Overall: 33" x 35.5" x 34" (838 x 902 x 864mm)
H-30135E E-series digital control version of H-30135
H-30135E.4F 230V, 50/60Hz version of H-30135E
6.6 cu. ft. (187L) capacity. Features calibrated dial-type temperature con-
H-30160.4F troller, 230V, 60 Hz, 3000 watts, 12.5 amps. Shipping wt. 195 lbs (77.1kg)
550°F Inside: 25.5" x 22.5" x 20" (648 x 572 x 508mm)
H-30160E.4F (287°C) E-series digital control version of H-30160.4F Overall: 33" x 35.5' x 24" (838 x 902 x 610mm)

H-30160SS.4F Stainless steel version of H-30160.4F

230V Models do not have wire plug

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 317
LABORATORY Bench Ovens

H-32343
(shown with
H-32333 (shown with optional
H-32300 stand)
Digital Controller)

Large Capacity Bench Ovens elements. All ovens feature a UL-listed control Digital Controller Option
These economical, large-capacity, bench ovens are panel and meet the requirements of the National A Digital, microprocessor-based controller, which
designed to handle a wide variety of applications, Fire Prevention Association Standard 86, industrial is thermocouple-actuated can be requested at
which require a maximum temperature of 400°F risk insurers, Factory Mutual and OSHA standards. time of order. Model is indicated by the DG2 suffix
(204°C) with a ±0.5% control accuracy and ±8°F Motor starter and heating element contactors in the chart below.
(4°C) uniformity for efficient drying of large samples. are electrically interlocked to shut off heaters if
All models feature an analog thermocouple- power to the blower is interrupted, and, permits Description Part #
actuated, temperature controller and a 1/3 HP operation of the blower without heat for cooling. Floor stand for H-32300 models H-32300.2
motor with a 400 CFM blower. Ovens have 2" Ovens include two (2) 50lb (22.7kg) capacity nickel- Floor stand for H-32333 models H-32333.2
(51mm) 6 lb/cf industrial rockwool insulation and plated wire shelves, which can be placed on any Floor Stand for H-32343 models H-32343.2
the built-in baffle helps reduce radiant heat and of the 10 support channels, which are located
optimizes oven heating operation. All ovens have Shelf for H-32300 models H-32300.1
on 3" centers. Extra shelves can be ordered to
304 stainless steel interiors, explosion venting accommodate needs. Shelf for H-32333 models H-32333.1
latches and incoloy sheathed tubular heating
See Chart for Models and Specifications Shelf for H-32343 models H-32343.1

Volume Inside dim. Max. Control Oven Outer dimension Rise Shpg.
Model Voltage Kw
Cu. ft (m) WxDxH temp. accuracy uniformity WxDxH time wt.
H-32300.2F
230V,60Hz 1ph.
H-32300.2F.DIG2
H-32300.2F.3
230V,60Hz 3ph.
H-32300.2F.3.DIG2
36" x 21" x 36" H-32300.8F 40" x 28" x 47" 600 lbs
15.8 400°F 208V,60Hz 1ph. 18
(910 x 530 x ±0.5% ±8°F H-32300.8F.DIG2 (1020 x 710 x 4.4 (272kg)
(.447) (204.4°C) min.
910mm) 1190mm)
H-32300.8F.3
208V,60Hz 3ph.
H-32300.8F.3.DIG2
H-32300.9F.3
460V,60Hz 3ph.
H-32300.9F.3.DIG2
H-32333.2F
230V,60Hz 1ph.
H-32333.2F.DIG2
H-32333.2F.3
230V,60Hz 3ph.
H-32333.2F.3.DIG2
36" x 36" x 36" H-32333.8F 40" x 43" x 47" 750 lbs
27 400°F 208V,60Hz 1ph.
18
(910 x 910 x ±0.5% ±8°F (1020 x 1090 x 6.6 (340kg)
(.764) (204.4°C) H-32333.8F.DIG2 min.
910mm) 1190mm)
H-32333.8F.3
208V,60Hz 3ph.
H-32333.8F.3.DIG2
H-32333.9F.3
460V,60Hz 3ph.
H-32333.9F.3.DIG2
H-32343.2F
230V,60Hz 1ph.
H-32343.2F.DIG2
H-32343.2F.3
230V,60Hz 3ph.
H-32343.2F.3.DIG2
36" x 48" x 36" H-32343.8F 40" x 55" x 47" 850 lbs
36 400°F 208V,60Hz 1ph.
22
(910 x 1220 x ±0.5% ±8°F (1020 x 1400 x 6.6 (385kg)
(1.01) (204.4°C) H-32343.8F.DIG2 min.
910mm) 1190mm)
H-32343.8F.3
208V,60Hz 3ph.
H-32343.8F.3.DIG2
H-32343.9F.3
460V,60Hz 3ph.
H-32343.9F.3.DIG2
50Hz models available upon request

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

318
Bench Ovens LABORATORY
Heavy-Duty Forced-Air, Convection Ovens
Ideally suited for soil and asphalt testing, the
Despatch LBB series ovens feature fast heat-up
rates and precise, easy-to-read digital controls.
Powerful open coil heating elements and a
forward curved fan deliver faster heat-up rates and
short processing times. Digital controls regulate
temperatures within tight tolerances. A 0.75"
(1.9cm) LED panel displays temperatures in large,
bright, easy-to-read numbers. Temperatures can
be reported in either Fahrenheit or Celsius. The
LBB series ovens operate at temperatures up to
399°F (204°C) and use forced-convection airflow
for uniform temperatures throughout the oven
chamber. The LBB is designed and manufactured
to provide years of dependable service. The fan
and heater are top-mounted to prevent damage
from spills. When spills do occur, the corrosion-
resistant, stainless steel interior and nickel-plated
shelves clean up easily. The motor is permanently
lubricated and virtually maintenance free. Every
LBB bench top oven is UL and C-UL listed, and
receives a thorough performance test before
shipping. Ovens come with two shelves, either
standard shelves, which can handle up to 50 lbs.
(22.7kg) or reinforced shelves, which can handle
H-30366.4F
200 lbs. (90.7kg) of material. See chart below
for number and type of shelves included with
each oven. Ovens meet AASHTO uniformity
requirements of ±3° at 150°C. Motor and fan are
H-30360.4F located above the stainless steel oven chamber to
prevent damage if materials are spilled.

See Chart for Models and Specifications

Heavy-Duty Laboratory Ovens

Operating Chamber size Capacity Despatch Overall size Shelves Shpg.

Model Electrical
range WxDxH cu. ft. (L) model WxDxH included wt.
50/60Hz, 1ph, 120V
H-30356 24 x 24.5 x 26" 205 lb
18 x 18 x 12" 2.3 15 amps, 1.2KW heater (2) Standard
LBB1-23 (610 x 620 x (92 kg)
(460 x 460 x 310mm) (65) 50/60Hz, 1ph, 240V (max. 5 @ 2"Ø )
H-30356.4F 660mm)
15 amps, 1.2KW heater
50/60Hz, 1ph, 120V
H-30360 36 x 24.5 x 36.5" 320 lb
30 x 18 x 22" 6.9 21.6 amps, 2.4KW heater (2) Reinforced
LBB1-69 (920 x 630 x (146 kg)
(760 x 460 x 560mm) (195) 50/60Hz, 1ph, 240V (max. 5 @ 4"Ø )
H-30360.4F 930mm)
10.8 amps, 2.4KW heater

95°F to 399°F 36 x 26.5 x 51.5" 315 lb

30 x 20 x 35" 12.1 50/60Hz, 1ph, 240V (2) Reinforced
35°C to 204°C H-30364.4F LBB2-12 (920 x 680 x (142 kg)
(770 x 510 x 890mm) (343) 16.4 amps, 3.6KW heater (max. 8 @ 4"Ø )
1310mm)

43 x 30.5 x 51.5" 485 lb

37 x 24 x 35" 18 50/60Hz, 1ph, 240V (2) Reinforced
H-30366.4F LBB2-18 (1100 x 780 x (221 kg)
(940 x 610 x 890mm) (510) 16.4 amps, 3.6KW heater (max. 8 @ 4"Ø )
1310mm)

43 x 43.5 x 51.5" 587 lb

37 x 37 x 35" 27.7 50/60Hz, 1ph, 240V (2) Reinforced
H-30368.4F LBB2-27 (1100 x 1110 x (266 kg)
(940 x 940 x 890mm) (784) 21.4 amps, 4.8KW heater (max. 8 @ 4"Ø )
1310mm)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 319
LABORATORY Bench Ovens
High-Performance Forced-Air Bench-Top Ovens
The LAC high-performance bench-top oven
uses horizontal recirculating airflow to ensure
uniform temperatures throughout the oven. A
high-volume fan circulates air through perforated,
stainless steel walls to create a constant horizontal
airflow across all sections of the oven. The result is
proven reliability
These ovens use a microprocessor-based
temperature and hi-limit controller with large LCD
display and real time clock for auto start capability.
The LCD display shows temperature readings along
with clear, detailed information on oven status. The
controller features three operating modes for quick
and easy operation: Manual mode, Timer mode
and Profile mode. The data-logging functionality
enables reporting and analyzing data files can be
exported via the controller’s USB port. Modbus
RS485 communications are included for easy data
access. in demanding production and laboratory
applications such as curing, drying, sterilizing,
aging and other process-critical procedures.
The Despatch LAC features sturdy, welded,
double-wall construction, three inches (7.6cm) of
glass fiber insulation and heavy-duty gaskets. Each
oven receives a thorough quality and performance H-30326.4F
test before it is shipped. Heating elements carry a
five-year warranty. All models are UL/C-UL listed.

See Chart for Models and Specifications

H-30322.4F

High-Performance Forced-Air Bench-Top Ovens

Despatch Electrical, Exhaust

Operating Chamber size Capacity Overall size Shelves Shpg.
Model model Single diameter Doors
range WxDxH cu. ft. (L) WxDxH included wt.
Phase (back)

120V 50/60Hz, 185 lb

18.8 x 18 x 19" 3.7 31 x 27 x 38" (2) Standard
H-30322 LAC1-38A 16 amps, 1 (84 kg)
(480x460x480mm) (105) (790 x 690 x 960mm) (max. 9 @ 2"Ø )
1.6 KW heater

240V 50/60Hz, 235 lb

18.8 x 18 x 19" 3.7 31 x 27 x 38" (2) Standard
H-30322.4F LAC1-38B 9.2 amps, 1 (106.4 kg)
(480x460x480mm) (105) (790 x 690 x 960mm) (max. 9 @ 2"Ø )
1.8 KW heater

40-260°C 240V 50/60Hz, 2.5" (2) Standard 203 lb

23.8 x 20 x 24" 6.6 36 x 29 x 43"
(104-500°F) (610x510x610mm) H-30324.4F LAC1-67 11.7 amps, (6.4cm) 1 (max. 11 @ (92 kg)
(187) (910x740x1100mm)
2.4 KW heater 2"Ø )

240V 50/60Hz, (2) Standard 360 lb

23.8 x 24 x 36" 12 36 x 33 x 55"
H-30326.4F LAC2-12 23.4 amps, 1 (max. 17 @ (163 kg)
(610x610x900mm) (340) (91x84x139mm)
4.8 KW heater 2"Ø )
240V 50/60Hz, (2) Standard 720 lb
35.3 x 24 x 36" 18 48 x 33 x 55"
H-30328.4F LAC2-18 23.4 amps, 2 (max. 17 @ (326.5 kg)
(900x610x900mm) (510) (1210x850x1390mm)
4.8 KW heater 2"Ø )

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

320
Muffle & Box Furnaces LABORATORY

H-4947AC

H-30204.4F H-30216.4F
H-30200

Small Bench top Muffle Furnace Large, Premium Bench top Muffle Furnace interlock system to shut off power when furnace
Small (0.07 cu.ft. 2.1L), 1520W bench top muffle Large (0.5 cu.ft. 14L), 3095W bench top muffle door open. Refer to table for specifications
furnace has ceramic fiber insulation, which provides furnace has ceramic fiber insulation, which provides 1200°C Box Furnace, 6" x 6" x 6" H-30209.4F
faster heat-up and reduced energy consumption. faster heat-up and reduced energy consumption. 1200°C Box Furnace, 8" x 12" x 7" H-30216.4F
Embedded heating element on top and both sides Embedded heating element on top, bottom Ship wt. 600lbs. (272kg)
provides temperature uniformity. Digital single set and both sides provides temperature uniformity. Gas Hotplate, Cylinder Gas
point temperature control to 2012°F (1100°C) with Digital single set point temperature control to Two-burner, heavy-duty cast iron stove runs on
single display showing actual temperature or set 2192°F (1200°C) with single display showing actual cylinder gas. Designed for portability, this stove is
point. Drop-down door doubles as a convenient temperature or set point. Drop-down door doubles perfect for any lab or location application. Burners
shelf for loading and unloading. Rear chamber port as a convenient shelf for loading and unloading. are rated at 35,000 BTU and provide fast heating.
for monitoring temperatures with independent Rear chamber port for monitoring temperatures
Gas Hotplate, Cylinder Gas H-4947AC
measuring devices. Shipped with power cord. with independent measuring devices. Shipped Ship wt. 44.7lbs. (20.2kg)
Refer to table for specifications. with power cord. Refer to table for specifications
Gas Hotplate, Natural Gas
Bench top Furnace, 120V 50/60Hz H-30200 Bench top Furnace, 240V 50/60Hz H-30204.4F Two-burner, heavy-duty cast iron stove runs on
Ship wt. 134lbs. (61kg)
Bench top Furnace, 240V 50/60Hz H-30200.4F natural gas. Designed for portability, this stove is
Ship wt. 30.6lbs. (13.8kg) Economical 1200°C Box Furnace perfect for any lab or location application. Burners
Medium Bench top Muffle Furnace Small to medium-sized, economical box furnaces are rated at 35,000 BTU and provide fast heating.
Medium (0.2 cu.ft. 5.8L), 1800W bench top muffle with a maximum working temperature of 1200°C.
Gas Hotplate, Natural Gas H-4947AN
furnace has ceramic fiber insulation, which provides Furnaces exhibit excellent temperature uniformity Ship wt. 44.1lbs. (20kg)
faster heat-up and reduced energy consumption. and use a ceramic fiber board lining to ensure
Embedded heating element on top and both sides energy efficiency. Heating elements are designed
provides temperature uniformity. Digital single set in a unique configuration, which lays directly on a
point temperature control to 2192°F (1200°C) with fiber-groove surface to ensure the longest heating
single display showing actual temperature or set element life, best heat radiation properties and
point. Drop-down door doubles as a convenient minimum distortion of heating elements at high
shelf for loading and unloading. Rear chamber port temperature. All models use long-life platinum/
for monitoring temperatures with independent rhodium S-type thermocouple. 30-segment, easy-
measuring devices. Shipped with power cord. to-use PID programmable temperature controller,
Refer to table for specifications allows control of heating rates, dwells (time holds)
Bench top Furnace, 120V 50/60Hz H-30201 and cooling rates. Safety feature includes a safety
Bench top Furnace, 240V 50/60Hz H-30201.4F
Ship wt. 86lbs. (39kg)

Dimensions Dimensions
Model Max. temp Electrical Model Max. temp Electrical
chamber( W x D x H) chamber( W x D x H)
H-30200 5" x 6" x 4.25" 120V, 12amps, 50/60Hz 2192°F 6" x 6" x 6"
2012°F H-30209.4F 208/220V 50/60Hz 1 ph.
(1100°C) (127 x 152 x 108mm) (1200°C) (203 x 305 x 178mm)
H-30200.4F 240V, 6.3amps, 50/60Hz
2192°F 8" x 12" x 7"
H-30201 120V, 15amps, 150/60Hz H-30216.4F 208/240V 50/60Hz 1 ph.
2192°F 7" x 10" x 5" (1200°C) (203 x 305 x 178mm)
(1200°C) (178 x 254 x 127mm)
H-30201.4F 240V, 7.5amps, 50/60Hz

2192°F 12.8" x 10" x 6.8"

H-30204.4F 240V, 12.9amps, 50/60Hz
(1200°C) (330 x 254 x 180mm)
2192°F 5" x 8" x 4"
H-30214.4F 208/240V 50/60Hz 1 ph.
(1200°C) (127 x 203 x 102mm)
2192°F 7" x 8" x 6"
H-30215.4F 208/240V 50/60Hz 1 ph.
(1200°C) (178 x 203 x 152mm)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 321
LABORATORY Hot Plates

H-4943 H-4943S H-4954 H-4944S

H-4958

H-4952 H-4953 H-4949

Economy Basic and Stirring Hotplates graduated scale. LED display. Top plate and dia. heating elements: Overall: 20.5" x 8.75" x 4"
Reflective white ceramic surface is acid- and base design diverts liquids away from internal (52 x 22 x 10cm). Warm-simmer rolling boil with
alkali-resistant and easy to clean. Non-heating electronics Safety warning system with visual alert adjustable controls.
frame surrounds the heated ceramic plate for protects user from accidental burns. Redundant Electric Hotplate H-4949
added protection. Fit virtually anywhere in the temperature control systems for over temperature Ship wt. 9.9lbs. (4.4kg)

lab. Easy-to-set analog temperature control knob protection. Incorporated base mount holds Heat Gun, Industrial-grade
with graduated scale. LED display. Top plate and support rods up to 13mm diameter—ideal when Powerful blower provides a high volumes of
base design diverts liquids away from internal using thermometers or pH probes. air needed for almost any application and
electronics Safety warning system with visual alert Heavy-Duty Hotplate, 12" x 12" See Table convenient base allows for stationary use. Unit is
protects user from accidental burns. Redundant Heavy-Duty Hotplate, 24" x 12" See Table 14.3 Amps and produces temperatures of 750-
temperature control systems for over temperature Ship wt. 12" x 12": 26lbs. (11.8kg), 24" x 12": 50lbs. (22.7kg) 1000°F. Air intake regulator provides temperature
protection. Incorporated base mount holds Electric Hotplate adjustment and cool air setting is great for no-
support rods up to 13mm diameter—ideal when Dual-burner electric hot plate. Two 825-watt rapid heat applications, adding versatility. Insulated
using thermometers or pH probes. heating burners. Infinite heat controls, heavy- nozzle Protects operator, provides a cool exterior
Economy Basic Hotplate See Table gauge steel construction; chrome finish; phenolic temperature.
Economy Stirring Hotplate See Table feet. Includes 3-wire cord and plug. 6.5" (16.5cm) Heat Gun, Industrial-grade H-4958
Ship wt. 7" x 7": 11lbs. (5kg), 10" x 10": 16lbs. (7.3kg) Ship wt. 6lbs. (2.7kg)

Cimarec® Basic and Stirring Hotplates Economy Basic and Stirring Hotplates
Consistent, repeatable temperatures are achieved
Temperature Heating Max. Standard Stirring Stirring
with microprocessor-controlled technology; ideal Electrical
range surface load model model r angle
for repetitive procedures. Durable low-profile,
12lbs 120V 60Hz H-4942 H-4942S
cast aluminum hot plates come with seamless Ambient 7" x 7"
reflective white ceramic top that provides excellent 5.4 kg 230V 50/60Hz H-4942.4F H-4942S.4F
to 540°C 30 to
visibility, resist alkali and acids and is easy to clean. (Ambient 120V 60Hz H-4943 H-4943S 1200rpm
16 lbs
Integral ring-stand holder accommodates 0.5'' to 1004°F) 10" x 10"
7.2 kg 230V 50/60Hz H-4943.4F H-4943S.4F
(1.3 cm) diameter support rod.— ideal when using
thermometers or pH probes. StirTrac™ technology Cimarec® Basic and Stirring Hotplates
offers improved slow speed stirring, consistent
Temperature Heating Max. Standard Stirring Stirring
speed control, and stronger magnetic coupling. Electrical
range surface load model model range
Digital hot plate features an LED that indicates
temperature setting in 5° increments. The warning 8.6 lbs 120V 60Hz H-4954 H-4944S
Ambient 7" x 7"
light signal system goes off when heating surface is 3.9kg 230V 50/60Hz — H-4944S.4F
to 540°C 50 to
50°C (122°F); protects user from accidental burns. (Ambient 120V 60Hz H-4955A H-4945AS 1200rpm
16 lbs
Cimarec® Basic Hotplate See Table to 1004°F) 10" x 10"
7.2kg 230V 50/60Hz H-4955A.4F H-4945AS.4F
Cimarec® Stirring Hotplate See Table
Ship wt. 7" x 7": 10lbs. (4.5kg), 10" x 10": 16.5lbs. (7.5kg) Heavy-Duty Hotplates
Heavy-Duty Hotplates Temperature Heating Max.
Electrical Model Watts
Reflective white ceramic surface is acid- and alkali- range surface load
resistant and easy to clean. Non-heating frame 120V 60Hz H-4952
12" x 12" 26 lbs
surrounds the heated ceramic plate for added 38 1600 watts
11.7kg 230V 50/60Hz H-4952.4F
protection. Fit virtually anywhere in the lab. Easy- to 371°C
to-set analog temperature control knob with (100 120V 60Hz H-4953
50 lbs
to 700°F) 24" x 12" 3200 watts
22.6kg 230V 50/60Hz H-4953.4F

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

322
Graduated Cylinders & Beakers LABORATORY

H-4912P.1M

H-4911.400
H-4912P.250

H-4911.100
H-4912P.050

H-4915.050 H-4915.025 H-4915.250 Graduated Cylinders, Glass Graduated Beakers, Glass

Glass graduated cylinders. Graduated circular Griffin low-form beakers for general laboratory
divisions, double-numbered, reading up and use have pour-out lip. Design provides greater
down. Calibrated to deliver the indicated strength via heavier uniform walls.
capacities. Packed one cylinder to a carton.
Graduated
Graduated Capacity Interval Model
Capacity Interval Model Range
Range
50ml 10-40 10 H-4911.050
10ml 1-10 .1 H-4915.010
100ml 20-80 10 H-4911.100
25ml 2-25 .2 H-4915.025
250ml 25-200 25 H-4911.250
50ml 5-50 1 H-4915.050
400ml 25-325 25 H-4911.400
100ml 10-100 2 H-4915.100 600ml 50-500 50 H-4911.600
250ml 10-250 2 H-4915.250 800ml 50-750 50 H-4911.800
500ml 25-500 5 H-4915.500 1000ml 50-950 50 H-4911.1M
1000ml 50-1000 10 H-4915.1M 2000ml 50-1950 50 H-4911.2M
2000ml 150-2000 20 H-4915.2M 3000ml 50-2950 50 H-4911.3M
4000ml 50-3950 50 H-4911.4M
Graduated Cylinders, Plastic
Polypropylene graduated cylinders are double Graduated Beakers, Plastic
scale with easy-to-read numbers. Stable base Low-form laboratory beakers with slightly tapered
makes cylinders tip- and roll-proof. 10ml size has heavy walls provide firm grip and convenient
flared top for easy filling stacking. Beakers have pour-out spout and
Graduated graduation markings (±5%)..
Capacity Interval Model
Range Graduated
10ml H-4916P.010 Capacity Interval Model
1-10 .2 Range
25ml 2-25 .5 H-4916P.025 50ml 10-50 10 H-4912P.050
50ml 5-50 1 H-4916P.050 100ml 25-100 25 H-4912P.100
100ml 10-100 2 H-4916P.100 250ml 50-250 10 H-4912P.250
H-4916P.050 H-4916P.500
250ml 30-250 2 H-4916P.250 400ml 100-400 50 H-4912P.400
500ml 50-500 5 H-4916P.500 600ml 100-600 100 H-4912P.600
1000ml 100-1000 20 H-4916P.1M 1000ml 200-1000 200 H-4912P.1M
2000ml 200-2000 20 H-4916P.2M 2000ml 200-2000 200 H-4912P.2M

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 323
LABORATORY Flasks, Dispensers

H-4913.250
H-3399XL

H-4917.2M H-4913.1M H-3397

H-3399 H-3398

H-4913.1MS H-4913.250S

Erlenmeyer Flasks Rubber Stoppers for Erlenmeyer Flasks Polyethylene Dispensing Bottles
Narrow-mouth flasks feature heavy-duty rim, Rubber stopper with brass hose fitting for use with Easy-to-squeeze, resilient bottles provide excellent
volume graduations, tubulation and matte spot for Erlenmeyer flasks. leak-proof dispensing service. Heavier flow rates
temporarily identifying contents. Flask Size (ml) Model can be accomplished by cutting back dispensing
tip.
Graduated 250 H-4913.250S
Capacity Interval Model 8 oz. (250ml) H-3398
Range
500 H-4913.500S 16 oz. (500ml) H-3399
250ml 75-250 25 H-4917.250
1000 H-4913.1MS 32 oz. (1000ml) H-3399XL
500ml 150-500 50 H-4917.500 Ship wt. 0.5lbs. (0.2kg)
2000 H-4913.2MS
1000ml 200-1000 50 H-4917.1M Guth Wash Bottle
4000 H-4913.4MS
2000ml 600-1800 200 H-4917.2M Bottle has aspirator bulb with integral passageways
and neck-mounted check-valve on a 1,000ml
4000ml 1500-3500 500 H-4917.4M
borosilicate florence flask. Includes bent delivery
tube and flexible tubing tip. Flask allows natural
Erlenmeyer Flasks—Vented
grip with either hand. Forefinger closes the
Narrow-mouth flasks feature heavy-duty rim,
opening while the other fingers squeeze the bulb
volume graduations, tubulation and matte spot for
ejecting a stream of liquid.
temporarily identifying contents.
Guth Wash Bottle H-3397
Ship wt. 2.1lbs. (0.9kg)
Graduated
Capacity Interval Model
Range
250ml 75-250 25 H-4913.250
500ml 150-500 50 H-4913.500
1000ml 200-1000 50 H-4913.1M
2000ml 600-1800 200 H-4913.2M
4000ml 1500-3500 500 H-4913.4M

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

324
Scoops & Pans LABORATORY
H-3705
H-3700

H-1702 H-3710 H-3707

H-3723

H-3712

H-4308
H-3981P H-3725, H-3728

H-3981
H-3986S

H-3981S
H-4309 H-3996S

H-4934

H-3967S
H-3993S
Material Handling Scoops
Model Size Description Shpg. Wt.
8" H x 15" W x 23" L 13.4 lb
H-1702 Material handling scoop
(203 x 381 x 584mm) (6kg) H-4359A
H-4308 15" x 30" x 4" Welded steel construction with open chute sim-
(381 x 762 x 102mm) plifies transfer or bag loading. Front swing-down 13.4 lb
12" x 20" x 4" handle folds inside pan to permit criss-cross (6kg)
H-4309 Stainless Steel Rectangular Pans
(305 x 508 x 102mm) stacking. Tapered scoop section controls flow.
Model Dimensions (L x W x D) Shpg. Wt.
Moisture and Immersion Pans 6.5" x 6" x 4.5"D 1.2 lb
Model Dimensions (LxWxD) Description Shpg. Wt. H-3981S
(165 x 152 x 114) (1.4kg)
Straight Sides 6.375" x 5.375" x 4.5"D 1 lb
H-3981P
Galvanized steel with wire-bound, rolled-top (165 x 152 x 114) (0.4kg)
18 x 18 x 1.5" deep 7 lb
H-3700 edges. Features 2 drop handles, straight sides. 10.5" x 5.5" x 4.5"D 2.3 lb
(457 x 457 x 38mm) (4.5kg) H-3986S
ASTM D2234, D2961 (267 x 40 x 114) (1.0kg)
24 x 24 x 4" deep 13.5" x 6.75" x 5"D 3 lb
H-3710 Galvanized steel with wire-bound, rolled-top H-3967S
(610 x 610 x 102mm) 14 lb (343 x 171 x 127) (1.3kg)
edges. Features 2 drop handles, straight sides.
24 x 24 x 6" deep (6kg)
H-3712 ASTM D346, D2013, D 2234 22" x 6.5" x 5.25"D 4.5 lb
(610 x 610 x 152mm) H-3993S
(559 x 165 x 133) (2.0kg)
Tapered Sides
15.5" x 8" x 7"D 5 lb
Galvanized steel with wire-bound, rolled-top H-3996S
18 x 18 x 3" deep 6.3 lb (394 x 204 x 178) (2.2kg)
H-3705 edges. Features 2 drop handles, tapered sides
(457 x 457 x 76mm) (2.8kg)
for nesting. ASTM D346, D2013, D2234
18 x 18 x 3" deep Galvanized steel with wire-bound, rolled-top 6.2 lb Tin Rectangular Mixing Pans
H-3707
(457 x 457 x 76mm) edges without handles (2.8 kg)
Model Dimensions (L x W x D) Shpg. Wt.
Galvanized steel with wire-bound, rolled-top
10 x 20 x 3" deep 5 lb 8 x 5.25 x 4.25" 2 lb
H-3723 edges. Features 2 drop handles, tapered sides H-3981
(254 x 508 x 76mm) (2.2kg) (203 x 133 x 108mm) (.9kg)
for nesting.
9 x 4.5 x 2.75 1.5 lb
Galvanized steel with wire-bound, rolled-top H-4934
24 x 24 x 3" deep edges. Features 2 drop handles, tapered sides 9.9 lb (229 x 114 x 70mm) (1.3kg)
H-3725
(610 x 610 x 76mm) for nesting. (4.4kg)
ASTM C192
Bakalon Rectangular Mixing Pan (Non-Stick)
Galvanized steel with wire-bound, rolled-top
Model Dimensions (L x W x D) Shpg. Wt.
36 x 36 x 3" deep edges. Features 2 drop handles, tapered sides 20 lb
H-3728
(914 x 914 x 76mm) for nesting. (9kg) 18 x 13 x 1.875" D 3 lb
H-4359A
ASTM C192 (457 x 330 x 47mm) (1.3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 325
LABORATORY Pans & Bowls
H-3969

H-4353.2, H-4353.4, H-4353.6 H-4354.2, H-4354.4, H-4354.6 H-4355.2, H-4355.4, H-4355.6

H-4352.2, H-4352.4, H-4352.6

H-4941

H-4351.2, H-4351.4, H-4351.6

H-4940.2, H-4940.4, H-4936, H-4937, H-4938,

H-4356.2, H-4356.4, H-4356.6 H-4940.6, H-4940.8 H-4939, H-4939.5

Stainless Steel Rectangular Mixing Pans Stainless Steel Rectangular Mixing Pans Aluminum Rectangular Mixing Pans (Non-Stick)
Model Dimensions (L x W x D) Model Dimensions (L x W x D) Model Size (L x W x D)
10.375 x 6.375 x 2.5" 12.75 x10.375 x 4" 8" x 8" x 2"
H-3969 H-4354.4 H-4941
(264 x 162 x 64mm) (342 x 264 x 102mm) (203 x 203 x 51mm)

20.75 x 12.75 x 2.5" 15.375" x 10.875" x 2.375"

12.75 10.375 x 6" H-4351.2
H-4352.2 H-4354.6 (390 x 276 x 60mm)
(527 x 323 x 63mm) (342 x 264 x 152mm)
17.625" x 11.75" x 2.375"
20.75 x 12.75 x 4" 12.75 x 6.875 x 2.5" H-4351.4
H-4352.4 H-4355.2 (447 x 298 x 60mm)
(527 x 324 x 102mm) (342x 174 x 64mm)
25.75" x 17.75" x 3.5"
20.75 x 12.75 x 6" 12.75 x 6.875 x 4" H-4351.6
H-4352.6 H-4355.4 (654 x 450 x 89mm)
(527 x 324 x 152mm) (342x 174 x 102mm)
13.875 x 12.75 x 2.5" 12.75 x 6.875 x 6" Stainless Steel Round Mixing Bowls & Pans
H-4353.2 H-4355.6
(346 x 323 x 63mm) (342 x 174 x 152mm) Model Dimensions (L x W x D)
13.875 x 12.75 x 2.5" 14.875 x 10.25 x 2" H-4936 7.25" x 3" (198 x 76mm)
H-4353.4 H-4356.2
(346 x 323 x 63mm) 376 x 269 x 50mm) 1.5 qt. (1.4L)
13.875 x 12.75 x 6" 16.125 x 11.125 x 2.25" H-4937 9.5" x 3.5" (241 x 89mm)
H-4353.6 H-4356.4
(346 x 323 x 152mm) (409 x 282 x 57mm) 3 qt. (2.8L)
12.75 x10.375 x 2.5" 18.125 x 12.375 x 2.375" H-4938 12.5" x 5.5" (318 x 140mm)
H-4354.2 H-4356.6
(342 x 264 x 64mm) (460 x 314 x 60mm) 8 qt. (7.6L)

Aluminum Round Mixing Pans (Non-Stick) H-4939 10.75" x 4.75" (273 x 121mm)
5.5 qt. (5.2L)
Model Dimensions (L x W x D)
H-4939.5 17.5" x 6.5" (444 x 165mm)
H-4940.2 9" x 1.5" (228 x 38mm)
16 qts. (13.9L)
H-4940.4 10" x 1.5" (254 x 38mm)
H-4940.6 12" x 1.5" (304 x 38mm)
H-4940.8 15" x 1.5" (381 x 38mm)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

326
Crucibles, Beakers, Dishes LABORATORY

H-17150
H-4924.100
H-4924.200

H-4920.1M
H-4920.050

H-4923.1M H-4923.500 H-4922.050 H-4922C.050

Moisture Dish, Aluminum Beakers, Aluminum or Nickel Crucibles, Nickel

Inverted slip-in cover with beaded edge for tight Low-form laboratory beakers with pour spout. These nickel crucibles are constructed from pure
sealing, can be handled with crucible tongs. One-piece construction eliminates breakage. heavy-sheet nickel. Suitable for fusions, including
Inside dia at top 2.25" x .75" deep (57mm x Capacity Aluminum Nickel those with sodium peroxide. Highly resistant to
19mm). Drawn aluminum construction. 60ml H-4920.060 H-4921.060 dilute alkalies.
Moisture Dish, Aluminum H-17150
Ship wt. 0.2lbs. (0.09kg)
125ml H-4920.125 H-4921.125 Capacity Top Dia. Height Crucible

Evaporating Dishes, Nickel 250ml H-4920.250 H-4921.250 20ml 38mm 35mm H-4922.020
Heavy gauge, pure nickel dishes with straight 500ml H-4920.500 H-4921.500 30ml 42mm 45mm H-4922.030
sides, flat bottom and pour lip.
1,000ml H-4920.1M H-4921.1M 50ml 45mm 51mm H-4922.050

Capacity Dia Height Model 2,000ml H-4920.2M H-4921.2M 75ml 51mm 57mm H-4922.075
2.25" 1" 100ml 60mm 64mm H-4922.100
40ml H-4924.040 Beakers, Aluminum or Nickel See Table
(57mm) (25mm) Ship wt. 0.6lbs. (0.3kg) 250ml 83mm 83mm H-4922.250
2.75" 1.375"
100ml H-4924.100 Measures, Stainless Steel 500ml 102mm 92mm H-4922.500
(70mm) (35mm)
Stainless steel measures feature convenient 1000ml 127mm 114mm H-4922.1M
3.375" 1.7625"
200ml H-4924.200 handle and graduations in milliliters and ounces
(86mm) (46mm)
on inside.
3.875" 2.25" Crucibles, Nickel See Table
300ml H-4924.300 Capacity Model Ship wt. 0.8lbs. (0.36kg)
(98mm) (57mm)
500ml H-4923.500 Crucibles Covers, Nickel
Evaporating Dishes, Nickel See Table Covers for the nickel crucibles above. Choose by
Ship wt. 0.6lbs. (0.27kg) 1,000ml H-4923.1M
crucible
Cruciblesize. Cover Crucible Cover
2,000ml H-4923.2M
20ml H-4922C.020 100ml H-4922C.100
Measures, Stainless Steel See Table
Ship wt. 1lb. (0.5kg)
30ml H-4922C.030 250ml H-4922C.250
50ml H-4922C.050 500ml H-4922C.500
75ml H-4922C.075 1000ml H-4922C.1M

Crucible Covers, Nickel See Table

Ship wt. 0.5lbs. (0.2kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 327
LABORATORY Dishes, Jars, Boxes, Desiccator

H-4960
H-4183A
H-4184A H-1350.70
H-4927

H-4962
H-4914.08
H-4930.250

Sample Cans Sample Cups, Tin

Cans for receiving, transporting and storing Capacity Dimensions Quantity Model
sample materials, complete with friction-type
2.5 oz (71g) 1.87" (47.5mm) ID, 1.42" (36mm) deep 48 H-1350.3A
lid. H-4183A, 1 gallon capacity (3.48L), can
adequately hold all material from an average- 3 oz (85g) 2.25" (57.1mm) ID, 1.42" (36mm) deep 36 H-1350.3
sized density hole. 4.7 oz (133g) 2.42" (61.5mm) ID, 1.67" (42.6mm) deep 36 H-1350.4A
Capacity Dimensions Model 5.6 oz (159g) 2.59" (66mm) ID, 1.72" (43.4mm) deep 36 H-1350.6A
Sample Cans
1 qt. 4.125" dia. x 4.875" 8.2 oz (232g) 3.05" (77.5mm) ID, 1.97" (50mm) deep 18 H-1350.8A
H-4184A
(.94L) (105 x 124mm) 16 oz (454g) 4" (102mm) ID, 2.375" (60.3mm) deep 1 H-1350.16
1 gal. 6.5" dia. x 7" 42.3 oz (1200g) 6.12" (155mm) ID, 3" (76.2mm) deep 1 H-1350.42
H-4183A
(3.48L) (165 x 178mm) 70.5 oz (2000g) 6.12" (155mm) ID, 5" (127mm) deep 1 H-1350.70
Desiccator Jar
Sample Cans See Table
Sample Jars, Plastic with Caps Heavy-walled, annealed jar has finely ground
Ship wt. 1lbs. (0.5kg)
White plastic jar with cap. 4 oz. jars come 24 to a flanges and cover knob. Includes specimen plate.
Moisture Boxes, Aluminum box, 8 oz. come 12 to a box and 16 oz. come 12 5" (128mm) jar has 5" inside diameter and 5.25"
Seamless aluminum, flat-bottom, straight-side to a box. (134mm) inside height, and, 8" (203mm) jar has 8"
box has tight fitting cover that fits bottom of box
also. Sample is protected from exposure during Capacity Model inside diameter and height.
weighing operations. 4 oz (113.4g), 24 ct. H-4914.04 Desiccator Jar, 5" (128mm) Dia. H-4960
Desiccator Jar, 8" (203mm) Dia. H-4961
Dia Height Model 8 oz (226.8g), 12 ct. H-4914.08 Ship wt. 8lbs. (3.6kg)

16 oz (453.6g), 12 ct. H-4914.16 Specimen Plate

2" (51mm) .875" (22mm) H-4926 Raised metal plate provides stable platform for
Evaporating Dishes, Porcelain samples.
2.5" (64mm) 1.75" (44mm) H-4927 Shallow, porcelain dish has pour lip, glazed inside Specimen Plate for H-4960 H-4960P
and partly glazed outside. Specimen Plate for H-4961 H-4961P
3" (76mm) 1" (25mm) H-4928 Top Dia Height Model
Ship wt. 2lbs. (0.9kg)
Capacity
Desiccab Desiccator
3.5" (89mm) 2" (51mm) H-4929 120ml 90mm 37mm H-4930.120 Stainless steel cabinet with Clear-Vue door
eliminates danger of glass breakage. Interior
250ml 115mm 45mm H-4930.250
Moisture Boxes, Aluminum See Table has chemical-resistant finish; door is sealed with
Ship wt. 0.2lbs. (0.09kg) 525ml 165mm 54mm H-4930.500 two firm-grip latches and molded rubber gasket.
Sample Cups, Tin Includes glass desiccator tray and two heavy-
7655ml 185mm 54mm H-4930.765
Flat-bottom, seamless tin sample cups have tele- gauge ceramic shelves that are fully adjustable
scoping covers. Hold samples for determining 1,285ml 215mm 63mm H-4930.M1285 with 0.5" (13mm) centers. Inside dimensions: 11.5"
penetrations. x 10" x 12" (292 x 254 x 305mm).
Evaporating Dishes, Porcelain See Table
Sample Cups, Tin See chart next column Ship wt. Range: 1lb. (0.5kg) to 2.5lbs. (1.1kg) Desiccab Desiccator H-4962
Ship wt. 21lbs. (9.5kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

328
Scoops LABORATORY
H-3730TC H-3735

H-3734TC
H-3732TC

H-3734 H-3730

H-3731

H-3738 H-3736 H-3727

Scoops, Stainless Steel

PTFE Scoop Bowl Vol./ Bowl
Model Nose Shpg. wt. Overall length
coated no. water (oz/cu. in.) Length width Depth
5" 2.5" 1" 2.5lbs 9"
H-3734 H-3734TC – Round 3.3 (6.1)
(114mm) (63mm) (25.4mm) (1.3kg) (228mm)
5.5" 3" 1-1/2" 1 lbs 9.325"
H-3735 H-3735TC – Flat 6.6 (12.2)
(139mm) (76mm) (38mm) (0.45kg) (236mm)
8" 5.5" 2-1/2" 3.3 lbs 13.5"
H-3736 H-3736TC – Flat 29 (53)
(203mm) (139mm) (63mm) (1.5kg) (343mm)
2.5" 2.5" 0.5 lbs 9"
H-3738 – – Curved – –
(635mm) (635mm) (0.23kg) (228mm)

Scoops, Aluminum
PTFE Scoop Bowl Vol./ Bowl
Model Nose Shpg. wt. Overall length
coated no. water (oz/cu. in.) Length width Depth
6.75" 4" 2.5" 2 lbs 10"
H-3729 H-3729TC 1 Round 13.5 (24.4)
(172mm) (102mm) (64mm) (0.9kg) (254mm)
6" 3.75" 2" 1 lbs 9.25"
H-3730 H-3730TC – Square 6.7 (12.2)
(152mm) (95mm) (51mm) (0.45kg) (235mm)
8.25" 5.25" 3" 2.1 lbs 12.25"
H-3731 H-3731TC 2 Round 20 (36.6
(210mm) (133mm) (76mm) (0.9kg) (311mm)
10.25" 5.25" 3.5" 2.5 lbs 14.5"
H-3732 H-3732TC 3 Round 33 (61.02)
(260mm) (146mm) (89mm) (1.3kg) (368mm)

Scoop, Plastic
PTFE Scoop Bowl Vol./ Bowl
Model Nose Shpg. wt. Overall length
coated no. water (oz/cu. in.) Length width Depth
9" 4" 5.5" 0.5 lbs 9"
H-3727 – – Flat 67 (115.5)
(228mm) (102mm) (139) (0.23kg) (228mm)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 329
LABORATORY Trowels, Spatulas

H-3762 H-4973 H-4908

H-4906

H-4904

H-3780
H-4907

H-3760 H-3761

H-4974 H-1042A.10

Trowel, Plasterer-Type Preparation Knife Step-Up and Down Transformers

Plasterer-type trowel‘s flat rectangular blade is Used for sample preparation and general lab work, Step-Up and down transformers allow the user to
fastened to the mounting and wood handle with knife has 6"-long thin, sharp blade and wood use 115-volt electrical equipment on a 230-volt line
stainless steel pins. Dimensions: 4.5" x 10" (114 x handle.) current, and allow 230-volt equipment to be used on
254mm) Preparation Knife H-4973 115V line current. Features case and core internally
Ship wt. 0.5lbs. (0.2kg) connected to third conductor of NEMA-standard
Trowel, Plasterer-Type H-3762
Ship wt. 1lbs. (0.45kg) Spatulas, Straight Edge cord and receptacle for safety. Has 3-conductor,
Trowel, Forged Steel ASTM C185, C780; AASHTO T137 (H-4907 only) 8" (2.4m) line cord and plug on primary side and
Forged steel trowel for mixing cement batches, Flexible stainless steel blades with straight edges female receptacle as output connection.
filling molds, etc., has flat pointed blade and and rounded ends. Blade is riveted into wooden
rubber/plastic handle. Dimensions: 2.75" x 5" (70 handle. H-4907 complies with ASTM C185, C780; Model Power shipg. wt.
x 127mm) AASHTO T137.
H-1042A 300-watt. 10 lbs. (4.5kg)
Trowel, 2.75" x 5" (70 x 127mm) H-3760 Spatula, 4" x .75" (102mm x 19mm) H-4904
Spatula, 6" x .875" (152mm x 22mm) H-4906 H-1042A.5 500-watt. 12 lbs. (5.4kg)
Trowel, 5.25" x 10" (133 x 254mm) H-3780
Ship wt. 0.4lbs. (0.2kg) Spatula, 6" x .5" (152mm x 13mm), ASTM H-4907 H-1042A.7 750-watt. 16 lbs. (7.3kg)
Spatula, 8" x 1.25" (204mm x 32mm) H-4908
Trowel, ASTM H-1042A.10 1,000-watt. 17 lbs. (7.7kg)
Spatula, 10" x 1.25" (254mm x 32mm) H-4910
ASTM C109; AASHTO T106 Ship wt. 0.5lbs. (0.2kg) H-1042A.15 1,500-watt. 21 lbs. (9.5kg)
Forged steel trowel for striking off molds, etc., has H-1042A.17 1,750-watt. 21 lbs. (9.5kg)
edges ground straight and rubber/plastic handle.
H-1042A.20 2,000-watt. 28 lbs. (12.7kg)
Dimensions: 2.75" x 5" (70 x 127mm)
H-1042A.25 2,500-watt. 28 lbs. (12.7kg)
Trowel, ASTM H-3761
Ship wt. 0.4lbs. (0.2kg) H-1042A.30 3,000-watt. 28 lbs. (12.7kg)
Spoon
Step-Up and down Transformers See table above
For mixing and transferring soils, handling see table
corrosive chemicals, etc., stainless steel spoon is
13" (330mm) long.
Spoon H-4974
Ship wt. 0.5lbs. (0.2kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

330
Hammers, Chisels LABORATORY

H-4890A
H-4895
H-4891 H-4893
H-4892
H-4894

H-4897C
H-4975

H-4896C H-4902

H-4976
H-4896
H-4898C

H-4903
H-4889

H-4900 H-4970

Hammers Chisels

Size Model Description Length Cut Point Stock Model

14 oz. Rock pick—pointed tip: nylon-vinyl grip H-4891 Pocket chisel 12" / 305mm .625" / 16mm .375" / 10mm H-4896C

22 oz. Rock pick—pointed tip; leather grip H-4892 Gad point chisel 9" / 229mm .75" / 19mm .75" / 19mm H-4897C

20 oz. Rock pick—chiseled edge; nylon-vinyl grip H-4893 Splitting chisel 8" / 203mm 1.125" / 28mm .75" / 19mm H-4898C

22 oz. Rock pick—pointed tip, 16.25" long H-4894 Chisel w/guard 8" / 203mm 1.0" / 25.4mm .75" / 19mm H-4970

3 lb. Crack hammer—painted w/nylon-vinyl grip H-4895 Pocket chisel 12" / 305mm .625" / 16mm .5" / 12.7mm H-4896

3 lb. Cross peen hammer (for EDG) H-4890A Concrete chisel 10" / 254mm 2" / 50.8mm .625" / 16mm H-4889

Stone chisel 8" / 203mm 2.25" / 57mm 1" / 25mm H-4902

Rubber Mallets
Bull Point chisel 12" / 305mm point .75" / 19mm H-4903
ASTM weight Head (L x Dia) Handle Model
Concrete chisel 8.5" / 216mm 2.75" / 70mm .75" / 19mm H-4905A
3 lbs 5 x 2.5" 12.75"
H-4975
(1.2 kg) (127 x 64mm) (324mm)

2 lbs 3.75 x 2.25" 11"

H-4976
(0.9 kg) (95 x 57mm) (280mm)
Goggles

Description Model

Goggles, safety, Soft vinyl frame with replaceable lens H-4900

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 331
LABORATORY Brushes, Straight Edge

H-3799

H-3770
H-3800

H-4259
H-3773
H-3639.8

H-3772

H-3774
H-3776

H-3639.20

H-4144.12

Brushes
Bristle length Overall dimension
Description Handle Bristle Model
(mm) (mm)
Wire no. 26 gauge 2" x 2" x 7" 7.75" x 2.625"
Wire scratch brush Wood H-4259
flat (51 x 51 x 178) (197 x 67)
2" x .875" x 5.25" 10.25"
Mold cleaning brush Wood Brass wire H-3800
(25 x 22 x 133) (360)
2" x 3" x 4" 8.25"
Acid-proof crete brush Plastic Polypropylene H-3639.8
(51 x 76 x 102) (210)
2" x 3" x 4" 20"
Acid-proof crete brush Plastic Polypropylene H-3639.20
(51 x 76 x 102) (508)
2.75" x 1.125" x .75" 10.5"
Sieve brush, oval shaped Plastic Horsehair H-3799
(70 x 29 x 19) (267)
2.5" x 1" x .375" 10.5"
Sieve brush, fine mesh Wood Horsehair H-3770
(64 x 25 x 10) (267)
0.5" x 0.5" x 1.375" 5.5"
Sieve brush, coarse mesh Wire loop Wire H-3772
(13 x 13 x 35) (140)
1.5" x .75" x 0.125" 7.25"
Sieve brush, fine mesh Plastic Wire H-3773
(38 x 19 x 3) (184)
1.5" x 1.25" dia. 5.25"
Sieve brush, fine mesh Wood Horsehair H-3774
(38 x 32) (133)
2.25" x 2" x 8" 13.5"
Table brush Wood Horsehair H-3776
(57 x 51 x 203) (343)

Straight Edge Straight Edges

ASTM C185, D558, D559, D560, D698;
AASHTO T137 Dimensions Model
For striking-off samples in containers, measures or
8" Straightedge, 0.125 x 1.25 x 8" (3 x 32 x 203mm) Ship wt. 0.8lbs (0.36kg) H-4144.8
molds. Ground steel with beveled edge.
Straight Edge See Table 12" Straightedge, 0.125 x 1.25 x 12" (3 x 32 x 305mm) Ship wt. 0.9lbs (0.41kg) H-4144.12
Ship wt. See table
16" Straightedge, 0.125 x 1.25 x 16" (3 x 32 x 406mm) Ship wt. 1.5lbs (0.7kg) H-4144.16
24" Straightedge, 0.125 x 1.25 x 24" (3 x 32 x 610mm) Ship wt. 0.9lbs (0.41kg) H-4144.24

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

332
Gloves, Shovels LABORATORY

H-3740

H-3745
H-3742 H-3743.9
H-3743.10

H-3746
H-4206 H-4207

H-4982

H-4222D
H-4983
H-4207A H-4208

Shovel, Round-Point Gloves, Nitrile-Coated, Hot Mill Sample Bags, Economy

Heat-treated, high-carbon steel round-pointed Non-woven, felt insulation and a full-length heat Heavy-duty material, unlined sample bag. Bag
blade has 27" (69cm) D-grip handle and full barrier protect hands. Nitrile coating prevents has draw-cord closure and can be used for
wooden yoke with steel casing. cuts and abrasions. For use in handling hot various applications involving soils, aggregates,
Shovel, Round-Point H-4982 objects up to 400°F. sands and similar materials.
Ship wt. 8.2lbs. (3.7kg) Gloves, Nitrile-Coated, Size 9 H-3743.9 Sample Bags, 10" x 19" (254 x 483mm) H-4206A
Shovel, Square-Point Gloves, Nitrile-Coated, Size 10 H-3743.10 Sample Bags, 15" x 29" (381 x 737mm) H-4207A
Ship wt. 0.8lbs. (0.36kg)
Heat-treated high-carbon steel 9.375 x 11.5" (24 Ship wt. 0.25lbs. (0.1kg)

x 29cm) square-pointed blade with 48" (122cm) Gloves, Heavy-Weight, Terrycloth Durometer, Type D
handle. Made from heavy-weight hot mill, synthetic fiber/ ASTM D4318, D2240
cotton blend. Cotton acrylic liner with nitrile Durometer used to test the hardness of the base of
Shovel, Square-Point H-4983
Ship wt. 5lbs. (2.3kg) N-coating. Reversible. a liquid limit machine, as well as hard rubber and
Gloves, Rubber Gloves, Heavy-Weight, Terrycloth H-3745 plastics, thermo plastics, flooring materials. Sharp
Ship wt. 1lbs. (0.5kg)
For use in compaction, concrete and general cone point 30°. Precision construction delivers
lab work, medium thickness short-form gloves Sample Bags lifetime accuracy. Sealed springs maintain load
Heavy-duty material, unlined sample bag. Bag deflection rate to a tolerance of .0004".
without gauntlets are chemical and abrasion
has draw-cord closure and can be used for Durometer, Type D H-4222D
resistant and feature curved fingers and
various applications involving soils, aggregates, Ship wt. 1.7lbs. (0.77kg)
contoured palm for ease while working.
sands and similar materials. Durometer, Type A
Gloves, Rubber H-3740
Ship wt. 0.3lbs. (0.14kg) Sample Bags, 10" x 18" (254 x 457mm) H-4206 Durometer used to test soft rubber, plastics, and
Gloves, Heavy-Weight, Heat-Resistant Sample Bags, 17" x 32" (432 x 813mm) H-4207 elastomers, printer's rolls. Flat cone point 35°
Ship wt. 0.5lbs. (0.22kg) included angle.
Made from heavy-weight hot mill, synthetic fiber/
cotton blend. Cotton acrylic liner with nitrile Sample Bags, Plastic-Lined Durometer, Type A H-4222A
N-coating. Reversible. Heavy-duty material, plastic-lined sample bag. Ship wt. 2.1lbs. (0.95kg)

Bag has draw-cord closure and can be used for Durometer, Type B
Gloves, Heavy-Weight, Heat-Resistant H-3742
Ship wt. 0.5lbs. (0.22kg) various applications involving soils, aggregates, Durometer used to test harder elastomers and
Gloves, Heat-Resistant sands and similar materials. plastics. Paper and fibrous materials above 93
Made with large thumb, fingers and loose- Sample Bags, 10" x 18" (254 x 457mm) H-4208 Duro A. Sharp Cone Point 30°
fitting palm with wide gauntlet, gloves feature Sample Bags, 17" x 32" (432 x 813mm) H-4209 Durometer, Type B H-4222B
Ship wt. 0.7lbs. (0.31kg) Ship wt. 3lbs. (1.4kg)
one-piece full-length palm and finger portions,
keeping seams to a minimum. Durometer, Type C
Gloves, Heat-Resistant H-3746 Durometer used to test medium hard elastomers
Ship wt. 1.5lbs. (0.68kg) and plastics. Useful to avoid surface marks. Flat
cone point 35° included angle
Durometer, Type B H-4222C
Ship wt. 3lbs. (1.4kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 333
LABORATORY Mortar & Pestle, Calipers

H-2816.8

H-2817

H-1675
H-17300

H-3570A

H-2817M

H-17280
H-17270

Rain Gauge Mortar Only Dial Calipers, Stainless Steel

Heavy-duty plastic rain gauge. Can be attached Mortar: 3" x 3" x 4.5"H (76 x 76 x 114mm); bore: 2" Easy-to-read, black-face dial caliper with combination
to walls, posts and other structures with included dia x 3" deep (51 x 76mm). inch and metric scales on main beam feature
bracket. Measures 5.5" (140mm) with 0.02" Mortar Only H-17301 0.001"/0.1mm gradations, dial gauge reads in
gradations for the first 0.5", .05" from 0.5 to 2" and Ship wt. 3lbs. (1.4kg) 0.001" gradations. Hardened and ground stainless
0.10" from 2 to 5.5". Pestle Only steel main beam with hardened, ground and lapped
Rain Gauge H-3570A Pestle: 9.5" (241mm) overall length. Designed to measuring faces.
Ship wt. 2lbs. (0.9kg) fit H-17301 Mortar. Digital Calipers, 6" (150mm), Stainless H-2817M
Mortar & Pestle (Plattner's) Ship wt. 1.5lbs. (0.68kg)
Pestle Only H-17302
For crushing small samples of ore. Made of Ship wt. 10.2lbs. (4.6kg) Dial Calipers, 6", Stainless Steel
hardened alloy tool steel. Mortar has flat- Mortar & Pestle, Compaction Mold Easy-to-read, 6", dial caliper. Scale features 0.001"
bottomed cylindrical cavity with removable ASTM E28 graduations, hardened and ground stainless steel
sleeve for containing crushed material. Mortar: 3" Mortar and pestle compaction mold used to main beam with hardened, ground and lapped
(76mm), O.D. cavity: 1" dia x 0.25" deep (25mm x prepare powdered samples to test softening measuring faces.
6.4mm). Guide sleeve: 1.5" (38mm) long. Pestle: point of resins and other bituminous materials Digital Calipers, 6", Stainless H-2817
1" dia x 3" long (25 x 76mm). using ring-and-ball method. Mortar, pestle, Ship wt. 1.3lbs. (0.59kg)

Mortar & Pestle (Plattner's) H-17270 sleeve, knockout button and ring support are Dial Calipers, Stainless Steel, Calibrated
Ship wt. 3.3lbs. (1.5kg) cold-rolled. steel. 6" (150mm) dial calipers with .001" accuracy. Dial
Mortar & Pestle Mortar & Pestle, Compaction Mold H-1675 movement for ultra-smooth sliding and high, shock
Meets U.S. Pharmacopoeia XIX. Made from Ship wt. 5lbs. (2.3kg) protection. Can measure OD, ID, depth and steps.
hardened tool steel in accordance with Digital Calipers Lock screw for dial bezel and for holding sliding jaw
specifications for powdered glass test. Mortar has May be used for outside, inside, depth and position. Supplied with fitted case and calibration
a flat-bottomed cylindrical cavity. Mortar: 76.2mm. step measurements. Switchable from inches to certificate.
O.D. cavity: 50.8mm dia x 43.9mm deep; pestle: millimeters. Accuracy is: ±0.001" (0.025mm). Digital Calipers, 6" (150mm), Calibrated H-2817C
50.4mm dia, 108mm overall length. Ship wt. 1.2lbs. (0.54kg)
Digital Calipers, 6" (150mm) H-2816
Mortar & Pestle H-17280 Digital Calipers, 8" (200mm) H-2816.8
Ship wt. 7lbs. (3.61g) Digital Calipers, 6" (150mm), Calibrated H-2816C
Mortar & Pestle, Hardened-Steel
Made of hardened alloy tool steel, this mortar Ship wt. 2lbs. (0.9kg)

and pestle is designed for crushing hard, tough Digital Calipers

substances. Pestle has ball-end to fit bottom of May be used for outside, inside, depth and
mortar cavity. Mortar: 3" x 3" x 4.5"H (76 x 76 step measurements. Switchable from inches to
x 114mm); bore: 2" dia x 3" deep (51 x 76mm). millimeters. Accuracy is: ±0.0015" (0.025mm).
Pestle: 9.5" (241mm) overall length. Digital Calipers, 12" (300mm) H-2816.12A
Ship wt. 3.7lbs. (1.68kg)
Mortar & Pestle, Hardened-Steel H-17300
Ship wt. 16lbs. (7.3kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

334
Gauges, Indicators LABORATORY

H-4466.30
H-4466.15
H-4466.10

H-4470

H-4460 H-4461A HM-4470.10

Gauges, Dial Indicators, Electronic, Digital Gas Hotplate, Cylinder Gas

Indicators are built to American Gauge Design For use in all Humboldt instrumentation. Switchable Two-burner, heavy-duty cast iron stove runs on
specifications for accuracy and are used in field inch/metric digital indicators are accurate to cylinder gas. Designed for portability, this stove is
and laboratory testing applications. Dials are high- ±0.0001 (0.002mm). Feature instant “0” at any perfect for any lab or location application. Burners
quality, low-friction type, designed for long life and spindle position, lock-in maximum reading, LCD are rated at 35,000 BTU and provide fast heating.
accurate repeatable readings. All dial indicators display with .305"-high characters, infrared linear Gas Hotplate, Cylinder Gas H-4947AC
have continuous graduations and revolution encoder, AC power or replaceable batteries. Order Ship wt. 44.7lbs. (20.2kg)
counters that show revolutions of the indicator HM-4469.02 as a replacement indicator for H-4454- Gas Hotplate, Natural Gas
hand. They are furnished with a lug back (with a 90° series proving rings—see pages 85 and 161. Two-burner, heavy-duty cast iron stove runs on
mounting hole to be used vertically or horizontally), Indicators, Electronic, Digital See Table natural gas. Designed for portability, this stove is
a regular contact point 0.25" long, and a dust Ship wt. 2.7lbs. (1.2kg) perfect for any lab or location application. Burners
cap. Dials listed are clockwise rotation; counter- are rated at 35,000 BTU and provide fast heating.
clockwise rotation see note below. Range Division Model Dia. Gas Hotplate, Natural Gas H-4947AN
Gauges, Dial See Table 0.2500" 0.0001" 2-9/32" Ship wt. 44.1lbs. (20kg)
Ship wt. 1.3lbs. (0.6kg) HM-4470.02
(6.250mm) (0.002mm) (51mm) Gauge Contact Point Extensions
0.2500" 0.00005" 2-9/32" Used in applications where gauges require longer
Gauges, Dial HM-4470.025
(6.250mm) (0.001mm) (51mm) contact points to ensure correct gauge placement.
Range Div. Dia. Brake Model 0.6000" 0.0001" 2-9/32" Contact points feature hardened steel points with
HM-4470.05
.200" .0001" 2.25" No H-4460 (15.000mm) (0.002mm) (51mm) polished tip to prevent scratching. Points fit all
.200" .0001" 2.25" Yes H-4461A 1.0000" 0.0001" 2-9/32" standard indicators and gauges. Not compat-
HM-4470.10
(25.400mm) (0.002mm) (51mm) ible with H-4471, H-4471CC, H-4465.12, and
.300" .0001" 2.25" No H-4462
2.0000" 0.0001" 2-9/32" H-4465.12CC gauges.
.500" .0001" 2.25" No H-4471 HM-4470.20
(50.800mm) (0.002mm) (51mm)
Contact Point Model
1.000" .001" 2.25" No H-4158.1 4.0000" 0.0001" 2-9/32"
HM-4470.40 0.25" (6.4mm) Gauge Extension H-4466.2
(101.600mm) (0.002mm) (51mm)
2.000" .001" 2.75" No H-4463
0.5" (13mm) Gauge Extension H-4466.5
3.000" .001" 3.25" No H-4464
Data Cable 1" (25mm) Gauge Extension H-4466.10
4.000" .001" 2.75" No H-4465 Data cable for use with digital indicators and Data
1.5" (38mm) Gauge Extension H-4466.15
5.000" .001" 2.75" No H-4466 Loggers.
2" (50mm) Gauge Extension H-4466.20
Data Cable HM-4470C
Gauges, Dial Metric Ship wt. 44.1lbs. (20kg) 3" (76mm) Gauge Extension H-4466.30
Range Div. Dia. Brake Model 6" (152mm) Gauge Extension H-4466.6
12mm .002mm 57mm No H-4465.12 Ship wt. 0.5lbs. (0.2kg)

25mm .010mm 57mm No H-4465.25 Indicator Holder, Magnetic, Swivel

Convenient, portable method of mounting dial
50mm .020mm 70mm No H-4465.50
indicators. The holder’s magnetic base mounts
easily on a flat or curved metallic surface. Non-
magnetic stainless steel holding rod is 6 x 0.25"
(154 x 6.4mm) and set in hardened ball socket so
indicator may be mounted in almost any position.
Indicator Holder, Magnetic, Swivel H-4470
Ship wt. 1.3lbs. (0.6kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 335
INDEX Numerical
AY1087X1.........................................................257 H-1336D.5F .....................................................228 H-1350.6A...............................................263, 327 H-1400 ..............................................................268
AY1087X6.........................................................257 H-1337 .....................................................228, 231 H-1350.70................................................263, 327 H-1410 ..............................................................268
F85930-33........................................................257 H-1337MM ......................................................231 H-1350.8A...............................................263, 327 H-1420 ..............................................................268
F85930-33X .....................................................257 H-1338.25.........................................................229 H-1351 ..............................................................235 H-1440 ..............................................................277
F85938 ..............................................................257 H-1338.25.1 .....................................................229 H-1352 ..............................................................262 H-1440.4F.........................................................277
F85938X ...........................................................257 H-1338.25.2 .....................................................229 H-1353A ...........................................................231 H-1442 ..............................................................277
H-1030 ..............................................................261 H-1338.25.3 .....................................................229 H-1355 ..............................................................231 H-1442.4F.........................................................277
H-1042A ...........................................................329 H-1338.25.4 .....................................................229 H-1355.4F.........................................................231 H-1446 ..............................................................276
H-1042A.10......................................................329 H-1338.26.........................................................229 H-1356D...........................................................228 H-1447 ..............................................................276
H-1042A.15......................................................329 H-1338.26.1 .....................................................229 H-1356D.2F .....................................................228 H-1448.1...........................................................276
H-1042A.17......................................................329 H-1338.27.........................................................229 H-1356D.5F .....................................................228 H-1448HP.........................................................276
H-1042A.20......................................................329 H-1338.27.1 .....................................................229 H-1360.21.........................................................226 H-1448P............................................................276
H-1042A.25......................................................329
H-1042A.30......................................................329
H-1338.28.........................................................229
H-1338.28.1 .....................................................229
H-1360A...........................................226 H-1448RT ................................................273, 276
H-1449A ...........................................................276
H-1360A.30......................................................227
H-1042A.5........................................................329 H-1338.29.........................................................229 H-1360A.31......................................................227 H-1456 ..............................................................275
H-1042A.7........................................................329 H-1338.30.........................................................229 H-1360A.32......................................................227 H-1456B............................................................275
H-1050.................................................260 H-1338.31.........................................................229
H-1338.32.........................................................229
H-1360A.32.1 ..................................................227 H-1456BB.........................................................275
H-1456BC.........................................................275
H-1050.2F.........................................................260 H-1360A.32.2 ..................................................227
H-1050.5F.........................................................260 H-1338.33.........................................................229 H-1360A.32.3 ..................................................227 H-1460 ..............................................................275
H-1068.100 ......................................................261 H-1338.34................................................227, 229 H-1360A.33......................................................227 H-1461 ..............................................................275
H-1068B............................................................260 H-1338.35.........................................................229 H-1360A.33.1 ..................................................227 H-1461.4F.........................................................275
H-1068B.2F......................................................260 H-1338.35.1 .....................................................229 H-1360A.35......................................................227 H-1464 ..............................................................275
H-1068B.5F......................................................260 H-1338.36.........................................................229 H-1360A.35.1 ..................................................227 H-1465 ..............................................................275
H-1068CB................................................258, 260 H-1338.37.........................................................229 H-1360A.36......................................................227 H-1465.4F.........................................................275
H-1068CB.2F..........................................258, 260 H-1338.38.........................................................229 H-1360A.37......................................................227 H-1466 ..............................................................275
H-1068CB.5F..........................................258, 260 H-1338.39.........................................................229 H-1360A.37L ...................................................227 H-1466.4F.........................................................275
H-1068PC.........................................................261 H-1338.40.........................................................229 H-1360A.37R...................................................227 H-1471 ..............................................................275
H-1068X............................................................260 H-1338.40.1 .....................................................229 H-1360A.38......................................................227 H-1471B............................................................275
H-1068X.2F......................................................260 H-1338.40A......................................................229 H-1360A.38.1 ..................................................227 H-1471BBA......................................................275
H-1068X.5F......................................................260 H-1338A ...........................................................228 H-1360A.38.2 ..................................................227 H-1471BC.........................................................275
H-1080 ..............................................................261 H-1338B............................................................228 H-1360AF.........................................................226 H-1471C ...........................................................275
H-1090 ..............................................................261 H-1338C ...........................................................228 H-1360AF.35....................................................227 H-1471N...........................................................275
H-1090.3...........................................................261 H-1339B............................................................234 H-1360B............................................................226 H-1471RV .........................................................275
H-1200 ..............................................................262 H-1339B.2F......................................................234 H-1360B.30......................................................227 H-1473 ..............................................................275
H-1202 ..............................................................262 H-1339B.5F......................................................234 H-1360B.35......................................................227 H-1473.4F.........................................................275
H-1240 ..............................................................262 H-1340 ..............................................................230 H-1360BF .........................................................226 H-1481.627 ......................................................276
H-1240.4F.........................................................262 H-1340G...........................................................230 H-1360BF.35....................................................227 H-1485.627 ......................................................276
H-1240D...........................................................262 H-1341A ..................................................228, 231 H-1360M ..........................................................226 H-1487.627 ......................................................276
H-1240D.4F .....................................................262 H-1341P............................................................231 H-1361 ..............................................................231 H-1489.627 ......................................................276
H-1250 ..............................................................262 H-1342 .....................................................234-235 H-1361P............................................................231 H-1494A ...........................................................277
H-1252 ..............................................................262 H-1342M ..........................................................235 H-1362 .....................................................233, 235 H-1495 ..............................................................277
H-1255 ..............................................................263 H-1343 ..............................................................230 H-1363 ..............................................................231 H-1495.1...........................................................277
H-1270 ..............................................................263 H-1344 .....................................................234-235 H-1364 ..............................................................226 H-1495.2A........................................................277
H-1280 ..............................................................263 H-1344.1...........................................................235 H-1364.2F.........................................................226 H-1495.3...........................................................277
H-1290 ..............................................................263 H-1344.2...........................................................235 H-1364.5F.........................................................226 H-1495.4F.........................................................277
H-1300 ..............................................................263 H-1344.2M.......................................................235
H-1344M ..........................................................235
H-1364R............................................................226 H-1496 .................................................277
H-1302 ..............................................................263 H-1364R.2F......................................................226 H-1497.613 .............................................276-277
H-1304 ..............................................................257 H-1345 ..............................................................230 H-1364R.5F......................................................226 H-1497.615 .............................................276-277
H-1310 ..............................................................263 H-1345.5...........................................................230 H-1366 ..............................................................226 H-1497.617 .............................................276-277
H-1317 ..............................................................263 H-1345.6...........................................................230 H-1366.2F.........................................................226 H-1497.627 .............................................276-277
H-1320 ..............................................................263 H-1346D...........................................................228 H-1366.5F.........................................................226 H-1497.633 .............................................276-277
H-1324A.3F......................................................235 H-1346D.2F .....................................................228 H-1366R............................................................226 H-1498.613 ......................................................277
H-1328A ...........................................................230 H-1346D.5F .....................................................228 H-1366R.2F......................................................226 H-1498.615 ......................................................277
H-1331 ..............................................................231 H-1347 ..............................................................228 H-1366R.5F......................................................226 H-1498.617 ......................................................277
H-1334B............................................................228 H-1347.2M.......................................................228 H-1367 ..............................................................231 H-1498.627 ......................................................277
H-1334B.4F......................................................228 H-1347.3M.......................................................228 H-1367MM ......................................................231 H-1499 ..............................................................277
H-1334BA.........................................................226 H-1347M ..........................................................228 H-1369 .....................................................233, 235 H-1499.1...........................................................277
H-1334BA.4F...................................................226 H-1348 ..............................................................231 H-1369M ..........................................................235 H-1499.2A........................................................277
H-1335 ..............................................................234 H-1349 .....................................................233, 235 H-1380 .....................................................236, 262 H-1499.3...........................................................277
H-1335.2F.........................................................234 H-1349M ..........................................................235 H-1380.4F................................................236, 262 H-1499.4F.........................................................277
H-1335.5F.........................................................234 H-1350.16................................................263, 327 H-1390 .....................................................236, 262 H-1510 ..............................................................268
H-1335M.2F.....................................................234 H-1350.3..................................................263, 327 H-1390.4F................................................236, 262 H-1515 ..............................................................257
H-1335M.5F.....................................................234 H-1350.3A........................................85, 263, 327 H-1392 .....................................................236, 262 H-1515SS..........................................................257
H-1336.21.........................................................228 H-1350.3SP ........................................................87 H-1392.4F................................................236, 262 H-1530.1...........................................................268
H-1336D...........................................................228 H-1350.42................................................263, 327 H-1394 ..............................................................236
H-1336D.2F .....................................................228 H-1350.4A...............................................263, 327 H-1394.4F.........................................................236

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

336
Numerical INDEX
H-1530.2...........................................................268 H-1675 ..............................................................333 H-1759 .....................................................209, 239 H-2175 ..............................................................267
H-1530.3...........................................................268 H-1680A .............................................................66 H-1761 ..............................................................239 H-2176 ..............................................................267
H-1530.4...........................................................268 H-1682 ................................................................66 H-1762 ..............................................................239 H-2177 ..............................................................267
H-1530.5...........................................................268 H-1684 ................................................................66 H-1762.4F.........................................................239 H-2178 ..............................................................267
H-1535 ..............................................................268 H-1686 ................................................................66 H-1763A ................90, 122, 136, 209, 239, 276 H-2179 ..............................................................267
H-1540 ..............................................................258 H-1686.2.............................................................66 H-1763A.4F....................90, 122, 136, 239, 276 H-2180 ..............................................................267
H-1550 ..............................................................273 H-1690 ..............................................................241 H-1764 ..............................................................239 H-2182 ..............................................................267
H-1550.1...........................................................273 H-1690.1...........................................................241 H-1764.2F.........................................................239 H-2183 ..............................................................267
H-1550.2...........................................................273 H-1690.2...........................................................241 H-1764.5F.........................................................239 H-2184 ..............................................................267
H-1550.3...........................................................273 H-1690.3...........................................................241 H-1766.2...........................................................239 H-2185 ..............................................................267
H-1550.5...........................................................273 H-1690.5F.........................................................241 H-1766.3...........................................................239 H-2189 ..............................................................267
H-1550.8...........................................................273 H-1691 ..............................................................241 H-1766.4...........................................................239 H-2194 ..............................................................267
H-1567.1...........................................................268 H-1691.4...........................................................241 H-1766.5...........................................................239 H-2195 ..............................................................267
H-1567.2...........................................................268 H-1691.5F.........................................................241 H-1766.6...........................................................239 H-2196 ..............................................................267
H-1567.3...........................................................268 H-1691.6A........................................................241 H-1767 ..............................................................239 H-2197 ..............................................................267
H-1567.4...........................................................268 H-1691.8A........................................................241 H-1768.3...........................................................239 H-2199 ..............................................................267
H-1567.4F.........................................................268 H-1692 ..............................................................241 H-1770 ..............................................................239 H-2260 ..............................................................298
H-1569 ..............................................................269 H-1692.4F.........................................................241 H-1782 ..............................................................238 H-2261 ..............................................................298
H-1570.................................................269 H-1692.5...........................................................241
H-1692.9...........................................................241
H-1782.4F.........................................................238
H-1820 ..............................................................237
H-2285 ..............................................................272
H-2290 ..............................................................272
H-1575 ..............................................................269
H-1580 ..............................................................269 H-1702 ..............................................................324 H-1826.3F.........................................................238 H-2290A ...........................................................272
H-1588 ..............................................................269 H-17150............................................................326 H-1857.5...........................................................276 H-2290B............................................................272
H-1595 ..............................................................269 H-1720 ..............................................................264 H-1857A ...........................................................276 H-2330 .....................................................272, 274
H-1596 ..............................................................269 H-1720.4F.........................................................264 H-1857A.2F......................................................276 H-2340 .....................................................272, 274
H-1596.4F.........................................................269 H-1722 ..............................................................264 H-1857A.5F......................................................276 H-2340RS .........................................................272
H-1602 ..............................................................269 H-1730 ..............................................................264 H-1871 .....................................................272, 274 H-2345 ..............................................................274
H-1631 ..............................................................256 H-1730.4F.........................................................264 H-1876 .....................................................272, 274 H-2345TS.................................................272, 274
H-1631.1...........................................................256 H-1732 ..............................................................264 H-1883 ..............................................................273 H-2345TTS..............................................272, 274
H-1631.5F.........................................................256 H-1733 ..............................................................264
H-1735 ..............................................................264
H-1910 .................................................273 H-2348 ..............................................................274
H-2400 ..............................................................270
H-1637.1...........................................................256 H-1910.1...........................................................273
H-1637.2...........................................................256 H-1741H ...........................................................265 H-1910.1S.........................................................273 H-2401 ..............................................................270
H-1637.3...........................................................256 H-1741H.4F .....................................................265 H-1910.3...........................................................273 H-2405B............................................................270
H-1637.3F.........................................................256 H-1741V............................................................265 H-1910.4..................................................272, 273 H-2405S............................................................270
H-1637.4...........................................................256 H-1741V.4F.......................................................265 H-1910.6...........................................................273 H-2406B............................................................270
H-1637.5...........................................................256 H-1745 ..............................................................264 H-1910.7S................................................272, 273 H-2406S............................................................270
H-1637.6...........................................................256 H-1746.1...........................................................265 H-1940 .....................................................273, 274 H-2407B............................................................270
H-1637.7...........................................................256 H-1746.10.........................................................265 H-1945 .....................................................273, 274 H-2407S............................................................270
H-1637.8...........................................................256 H-1746.2...........................................................265 H-1946 ..............................................................274 H-2430 ..............................................................273
H-1640.1..................................................253, 254 H-1746.3...........................................................265 H-1990.1...........................................................270 H-2430.1...........................................................273
H-1640.2...........................................................253 H-1746.4...........................................................265 H-1990.2...........................................................270 H-2430.3..................................................272-273
H-1640.3...........................................................253 H-1746.5...........................................................265 H-1990A ...........................................................270 H-2430.4F.........................................................273
H-1640.4...........................................................253 H-1746.6...........................................................265 H-1990A.4F......................................................270 H-2435.10................................................272-274
H-1640.5...........................................................253 H-1746.7...........................................................265 H-2060 ..............................................................271 H-2435.20.........................................................274
H-1640.6...........................................................253 H-1746.8...........................................................265 H-2085 ..............................................................271 H-2435.25................................................272-274
H-1640.7...........................................................253 H-1746.9...........................................................265 H-2085.1...........................................................271 H-2435.5...........................................................274
H-1640.8...........................................................253 H-1747.1...........................................................265
H-1747.2...........................................................265
H-2085.4F.........................................................271 H-2440 .................................................272
H-1640.9...........................................................253 H-2085P............................................................271 H-2442.10.........................................................272
H-1640B.4F......................................................253 H-1747.3...........................................................265 H-2095 ..............................................................271 H-2442.25.........................................................272
H-1641.7...........................................................254 H-1747.4...........................................................265 H-2095.4.2........................................................271 H-2450 ..............................................................273
H-1641T............................................................254 H-1747.5...........................................................265 H-2095.5...........................................................271 H-2450.4F.........................................................273
H-1641T.1.........................................................254 H-1747.6...........................................................265 H-2095P............................................................271 H-2452 ..............................................................273
H-1641T.2.........................................................254 H-1749 ..............................................................237 H-2100 ..............................................................271 H-2494 ..............................................................270
H-1641T.3.........................................................254 H-1750 ..............................................................237 H-2111 ..............................................................271 H-2495 ..............................................................270
H-1641T.4.........................................................254 H-1750.2...........................................................237 H-2112 ..............................................................271 H-2496 ..............................................................270
H-1641T.4F.......................................................254 H-1750.3...........................................................237 H-2165 .....................................................266-267 H-2497 ..............................................................270
H-1641T.5.........................................................254 H-1750SS..........................................................237 H-2165.4F................................................266-267 H-2498 ..............................................................270
H-1641T.6.........................................................254 H-1751 ..............................................................237 H-2166A ..................................................266-267 H-2505 ..............................................................270
H-1642 ..............................................................254 H-1753 ..............................................................238 H-2166A.4F.............................................266-267 H-2519 ..............................................................263
H-1642.1..................................................254-255 H-1754D...........................................................237 H-2167 ..............................................................266 H-2520 ..............................................................263
H-1642.2..................................................254-255 H-1754D-CA....................................................237 H-2167.4F.........................................................266 H-2522 ..............................................................263
H-1642.3..................................................254-255 H-1754D.4F .....................................................237 H-2171 ..............................................................267 H-2524 ..............................................................263
H-1642.5F.........................................................254 H-1754D.4F-CA..............................................237 H-2172 ..............................................................267 H-2525 ..............................................................263
H-1642T...................................................254-255 H-1755A ...........................................................237 H-2173 ..............................................................267 H-2529 ..............................................................263
H-1642T.5F..............................................254-255 H-1756.3F.........................................................238 H-2174 ..............................................................267 H-2560 ..............................................................268
H-1757 ..............................................................239 H-2174C ...........................................................267 H-2560.1...........................................................268
H-1758 ..............................................................239

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 337
INDEX Numerical
H-2560.2...........................................................268 H-2604.15C .....................................................296 H-2605.67FC...................................................296 H-2614 ..............................................................295
H-2560.3...........................................................268 H-2604.15F ......................................................296 H-2605.91C .....................................................296 H-2615 ..............................................................295
H-2560.5...........................................................268 H-2604.16C .....................................................296 H-2610.10C .....................................................297 H-2616 ..............................................................295
H-2595 ..............................................................268 H-2604.16F ......................................................296 H-2610.10CT...................................................297 H-2617 ..............................................................295
H-2598.................................................268 H-2604.17C .....................................................296
H-2604.17F ......................................................296
H-2610.110C...................................................297 H-2618 ..............................................................295
H-2600.10F ......................................................297 H-2610.110CT.................................................297 H-2619 ..............................................................295
H-2600.10FT....................................................297 H-2604.19C .....................................................296 H-2610.113C..........................................269, 297 H-2620 ..............................................................295
H-2600.110F....................................................297 H-2604.19F ......................................................296 H-2610.113CT.................................................297 H-2628 ..............................................................298
H-2600.110FT .................................................297 H-2604.1C........................................................296 H-2610.11C .....................................................297 H-2628H ...........................................................298
H-2600.113F...........................................269, 297 H-2604.1F.........................................................296 H-2610.11CT...................................................297 H-2629 ..............................................................298
H-2600.113FT .................................................297 H-2604.20C .....................................................296 H-2610.12C .....................................................297 H-2631D...........................................................295
H-2600.11F .............................................271, 297 H-2604.20F ......................................................296 H-2610.12CT...................................................297 H-2632D...........................................................295
H-2600.11FT....................................................297 H-2604.21C .....................................................296 H-2610.13C .....................................................255 H-2633 ..............................................................295
H-2600.12F ......................................................297 H-2604.33C .....................................................296 H-2610.15C ............................................269, 297 H-2634D...........................................................295
H-2600.12FT....................................................297 H-2604.33F ......................................................296 H-2610.15CT...................................................297 H-2639 ..............................................................295
H-2600.15F .............................................269, 297 H-2604.34C .....................................................296 H-2610.16C ............................................269, 297 H-2640 ................................................................64
H-2600.15FT....................................................297 H-2604.57C .....................................................296 H-2610.16CT...................................................297 H-2660 ................................................................64
H-2600.16F .............................................269, 297 H-2604.57F ......................................................296 H-2610.17C ............................................267, 297 H-2670.1...........................................................156
H-2600.16FT....................................................297 H-2604.5C........................................................296 H-2610.17CT...................................................297 H-2670.1.100...................................................156
H-2600.17C .....................................................269 H-2604.5F.........................................................296 H-2610.18C ............................................269, 297 H-2670.1.50 .....................................................156
H-2600.17F .............................................267, 297 H-2604.9C........................................................296 H-2610.18CT...................................................297 H-2670.1T.........................................................156
H-2600.17FT....................................................297 H-2604.9F.........................................................296 H-2610.19C ............................................267, 297 H-2680 ..............................................................156
H-2600.18F .............................................267, 297 H-2605.116C...................................................296 H-2610.19CT...................................................297 H-2680P............................................................156
H-2600.18FT....................................................297 H-2605.117C...................................................296 H-2610.1C........................................................297 H-2682 ..............................................................156
H-2600.19F .............................................267, 297 H-2605.120C...................................................296 H-2610.1CT .....................................................297 H-2682CH........................................................156
H-2600.19FT....................................................297 H-2605.12C .....................................................296 H-2610.20C ............................................267, 297 H-2684 ..............................................................156
H-2600.1FT ......................................................297 H-2605.12F ......................................................296 H-2610.20CT...................................................297 H-2686 ..............................................................156
H-2600.20F .............................................267, 297 H-2605.130C...................................................296 H-2610.21C ............................................267, 297 H-2710A.1..........................................................62
H-2600.20FT....................................................297 H-2605.130F....................................................296 H-2610.21CT...................................................297 H-2712A .............................................................62
H-2600.21F ......................................................269 H-2605.15C .....................................................296 H-2610.22C ............................................267, 297 H-2712A.4F........................................................62
H-2600.22F .............................................267, 297 H-2605.15F ......................................................296 H-2610.22CT...................................................297 H-2712A.6..........................................................62
H-2600.22FT....................................................297 H-2605.18C .....................................................296 H-2610.28C .....................................................297 H-2712A.6.4F ....................................................62
H-2600.28F ......................................................297 H-2605.18F ......................................................296 H-2610.28CT...................................................297 H-2713B..............................................................62
H-2600.28FT....................................................297 H-2605.22C .....................................................296 H-2610.2C...............................................221, 297 H-2713B.4F........................................................62
H-2600.2F................................................221, 297 H-2605.22F ......................................................296 H-2610.2CT .....................................................297 H-2715 ................................................................63
H-2600.2FT ......................................................297 H-2605.56C .....................................................296 H-2610.33C .....................................................297 H-2716.4F...........................................................62
H-2600.33F ......................................................297 H-2605.56F ......................................................296 H-2610.33CT...................................................297 H-2717 ................................................................62
H-2600.33FT....................................................297 H-2605.58C .....................................................296 H-2610.35C .....................................................297 H-2717.4F...........................................................62
H-2600.35F ......................................................297 H-2605.58F ......................................................296 H-2610.35CT...................................................297 H-2727D...........................................................293
H-2600.35FT....................................................297 H-2605.59C .....................................................296
H-2605.59F ......................................................296
H-2610.3C........................................................297
H-2610.3CT .....................................................297
H-2732 .................................................164
H-2600.3F.........................................................297 H-2734 ..............................................................163
H-2600.3FT ......................................................297 H-2605.5C....................................296 H-2610.45C .....................................................297
H-2610.45CT...................................................297
H-2734.1...........................................................163
H-2600.45F ......................................................297 H-2605.5F.........................................................296 H-2734.2...........................................................163
H-2600.45FT....................................................297 H-2605.62C .....................................................296 H-2610.46C .....................................................297 H-2734.3...........................................................163
H-2600.47F ......................................................297 H-2605.62CC ..................................................296 H-2610.46CT...................................................297 H-2734.4...........................................................163
H-2600.47FT....................................................299 H-2605.62F ......................................................296 H-2610.47C .....................................................297 H-2734.5...........................................................163
H-2600.57F ......................................................297 H-2605.62FC...................................................296 H-2610.47CT...................................................297 H-2734.5F.........................................................163
H-2600.57FT....................................................297 H-2605.63C .....................................................296 H-2610.57C .....................................................297 H-2735A.3........................................................162
H-2600.5F................................................268, 297 H-2605.63CC ..................................................296 H-2610.57CT...................................................297 H-2735C ...........................................................162
H-2600.5FT ......................................................297 H-2605.63F ......................................................296 H-2610.5C...............................................268, 297 H-2735C.1........................................................162
H-2600.63F ......................................................297 H-2605.63FC...................................................296 H-2610.5CT .....................................................297 H-2735C.4F .....................................................162
H-2600.63FT....................................................297 H-2605.64C .....................................................296 H-2610.63C .....................................................297 H-2735C.5........................................................162
H-2600.64F ......................................................297 H-2605.64CC ..................................................296 H-2610.63CT...................................................297 H-2735F............................................................162
H-2600.64FT....................................................297 H-2605.64F ......................................................296 H-2610.64C .....................................................297 H-2735F.1 .........................................................162
H-2600.6F................................................268, 297 H-2605.64FC...................................................296 H-2610.64CT...................................................297 H-2735F.4F.......................................................162
H-2600.6FT ......................................................297 H-2605.65C .....................................................296 H-2610.6C...............................................268, 297 H-2735F.5 .........................................................162
H-2600.7F.........................................................297 H-2605.65CC ..................................................296 H-2610.6CT .....................................................297 H-2736 ..............................................................164
H-2600.7FT ......................................................297 H-2605.65F ......................................................296 H-2610.7C........................................................297 H-2736.1...........................................................164
H-2600.8F.........................................................297 H-2605.65FC...................................................296 H-2610.7CT .....................................................297 H-2736.2...........................................................164
H-2600.8FT ......................................................297 H-2605.66C .....................................................296 H-2610.8C........................................................297 H-2736.3...........................................................164
H-2600.9F................................................270, 297 H-2605.66CC ..................................................296 H-2610.8CT .....................................................297 H-2736.4...........................................................164
H-2600.9FT ......................................................297 H-2605.66F ......................................................296 H-2610.9C...............................................268, 297 H-2736.SW.......................................................164
H-2604.113C...................................................296 H-2605.66FC...................................................296 H-2610.9CT .....................................................297 H-2737 ..............................................................163
H-2604.113F....................................................296 H-2605.67C .....................................................296 H-2611 ..............................................................295
H-2604.14C .....................................................296 H-2605.67F ......................................................296 H-2612 ..............................................................295
H-2613 ..............................................................295

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

338
Numerical INDEX
H-2737.1...........................................................163 H-2785.5..................................................148-149 H-2820 ..............................................................216 H-2925C.1........................................................168
H-2737.2...........................................................163 H-2785.51.........................................................149 H-2820M ..........................................................216 H-2931 ..............................................................159
H-2737.3...........................................................163 H-2785.53................................................148-149 H-2821 ..............................................................216 H-2934 ..............................................................159
H-2737.4...........................................................163 H-2785.55................................................148-149 H-2822 ..............................................................216 H-2935 ..............................................................159
H-2738 ..............................................................163 H-2785.6..................................................148-149 H-2823 ..............................................................216 H-2936A ...........................................................198
H-2746 ..............................................................164 H-2785.6A...............................................148-149 H-2823M ..........................................................216 H-2937 ..............................................................166
H-2747 ..............................................................164 H-2785.7..................................................148-149 H-2827 ..............................................................160 H-2937M ..........................................................166
H-2755 ..............................................................147 H-2785.DB ..............................................148-149 H-2827M ..........................................................160 H-2938 ..............................................................166
H-2755.2...........................................................147 H-2785.DB1.....................................................149 H-2827MHD....................................................160 H-2939 ..............................................................166
H-2756.................................................147 H-2785.DB10...................................................149 H-2827MP........................................................160 H-2942 ..............................................................159
H-2783 ..............................................................146 H-2785.DB12...................................................149
H-2785.DB2.....................................................149
H-2833 .................................................207 H-2943 ..............................................................166
H-2944 ..............................................................166
H-2783.12................................................148-149 H-2834 ..............................................................207
H-2783.17................................................148-149 H-2785.DB3.....................................................149 H-2834.500 ......................................................207 H-2945 ..............................................................166
H-2783.19................................................148-149 H-2785.DB4A..................................................149 H-2834.750 ......................................................207 H-2945G...........................................................166
H-2783.2..................................................148-149 H-2785.DB5.....................................................149 H-2834SSB.......................................................207 H-2945G-4 .......................................................166
H-2783.21................................................148-149 H-2785.DB6.....................................................149 H-2835 ..............................................................207 H-2946A ...........................................................168
H-2783.24................................................148-149 H-2785.DB7.....................................................149 H-2838 ..............................................................207 H-2946ACP60.................................................168
H-2783.25................................................148-149 H-2785.DB9.....................................................149 H-2845 ..............................................................206 H-2946ACP70.................................................168
H-2783.26................................................148-149 H-2786 ..............................................................147 H-2845.1...........................................................206 H-2946AR.........................................................168
H-2783.27................................................148-149 H-2786C ...........................................................147 H-2845.2...........................................................206 H-2946B............................................................168
H-2783.28................................................148-149 H-2786C.10 ............................................148-149 H-2846 ..............................................................206 H-2946BCP50 .................................................168
H-2783.29................................................148-149 H-2786C.11SA.......................................148-149 H-2860 ..............................................................217 H-2946BCP60 .................................................168
H-2783.3..................................................148-149 H-2786C.2...............................................148-149 H-2860W..........................................................217 H-2946BCP70 .................................................168
H-2783.30................................................148-149 H-2786C.22 ............................................148-149 H-2872 ..............................................................188 H-2946BR.........................................................168
H-2783.31................................................148-149 H-2786C.26 ............................................148-149 H-2872.1...........................................................188 H-2946C ...........................................................168
H-2783.32................................................148-149 H-2786C.29 ............................................148-149 H-2874 ..............................................................189 H-2946CCP50.................................................168
H-2783.39................................................148-149 H-2786C.3...............................................148-149 H-2877 ..............................................................189 H-2946CCP60.................................................168
H-2783.5..................................................148-149 H-2786C.32 ............................................148-149 H-2877.1...........................................................189 H-2946CCP70.................................................168
H-2783.6..................................................148-149 H-2786C.33 ............................................148-149 H-2877.2...........................................................189 H-2946CR.........................................................168
H-2783.62H .....................................................149 H-2786C.40 ............................................148-149 H-2878 ..............................................................189 H-2946D...........................................................168
H-2783.6A...............................................148-149 H-2786C.5...............................................148-149 H-2879 ..............................................................193 H-2946DCP50.................................................168
H-2784 ..............................................................146 H-2786C.55 ............................................148-149 H-2879.200 ......................................................193 H-2946DCP60.................................................168
H-2784.500 ......................................................146 H-2786C.6...............................................148-149 H-2879.300 ......................................................193 H-2946DCP70.................................................168
H-2785.1..................................................148-149 H-2786C.6A............................................148-149 H-2879.50.........................................................193 H-2946DOCP50.............................................168
H-2785.11................................................148-149 H-2786C.9A............................................148-149 H-2880 ..............................................................193 H-2946DOCP60.............................................168
H-2785.12................................................148-149 H-2786CL ................................................148-149 H-2900.4...........................................................166 H-2946DOCP70.............................................168
H-2785.13................................................148-149 H-2786P............................................................147 H-2900.6...........................................................166 H-2946DR.........................................................168
H-2785.14................................................148-149 H-2788 .....................................................148-149
H-2789 .....................................................148-149
H-2901 ..............................................................207 H-2948 .................................................167
H-2785.15................................................148-149 H-2902 ..............................................................207 H-2948.4F.........................................................167
H-2785.16................................................148-149 H-2790 ..............................................................283 H-2903 ..............................................................207 H-2949 ..............................................................167
H-2785.18................................................148-149 H-2790B............................................................283 H-2904 ..............................................................207 H-2949.4F.........................................................167
H-2785.19................................................148-149 H-2790D...........................................................283 H-2905.1.........................................160, 205, 218 H-2950 ..............................................................159
H-2785.2..................................................148-149 H-2791 ..............................................................283 H-2905.2...........................................................207 H-2950.RCA.....................................................155
H-2785.20................................................148-149 H-2792 ..............................................................283 H-2905.3...........................................................207 H-2950H ...........................................................159
H-2785.22................................................148-149 H-2793 .....................................................148-149 H-2911 ..............................................................179 H-2951 ..............................................................167
H-2785.23................................................148-149 H-2795P............................................................150 H-2911D...........................................................179 H-2951.4F.........................................................167
H-2785.24................................................148-149 H-2796A ...........................................................150 H-2911L ............................................................179 H-2952 ..............................................................168
H-2785.25................................................148-149 H-2800 ..............................................................217 H-2912 ..............................................................179 H-2952.3...........................................................168
H-2785.26................................................148-149 H-2802 ..............................................................216 H-2912L ............................................................179 H-2953 ..............................................................167
H-2785.27................................................148-149 H-2804 ..............................................................217 H-2914B............................................................165 H-2953.4F.........................................................167
H-2785.28................................................148-149 H-2805 ..............................................................217 H-2916 ..............................................................179 H-2954 ..............................................................167
H-2785.29................................................148-149 H-2805-A..........................................................217 H-2916D...........................................................179 H-2954.4F.........................................................167
H-2785.3..................................................148-149 H-2805-R...........................................................217 H-2916L ............................................................179 H-2955 ..............................................................167
H-2785.31................................................148-149 H-2809 ..............................................................217 H-2917 ..............................................................179 H-2955.4F.........................................................167
H-2785.32................................................148-149 H-2810 ..............................................................216 H-2917L ............................................................179 H-2958 ..............................................................167
H-2785.33................................................148-149 H-2812 ..............................................................217 H-2918 ..............................................................179 H-2959 ..............................................................167
H-2785.34................................................148-149 H-2813 ................................................................54 H-2918D...........................................................179 H-2964A ...........................................................197
H-2785.35................................................148-149 H-2816 ..............................................................333 H-2918L ............................................................179 H-2964A.4F......................................................197
H-2785.36................................................148-149 H-2816.12A......................................................333 H-2919 ..............................................................179 H-2967 ..............................................................162
H-2785.38.........................................................149 H-2816.8.........................................198, 217, 333 H-2919L ............................................................179 H-2968 ..............................................................162
H-2785.38HP...................................................149 H-2816C ...........................................................333 H-2920 ..............................................................179 H-2969.4...........................................................162
H-2785.4..................................................148-149 H-2817 .....................................................217, 333 H-2925A ...........................................................168 H-2969.6...........................................................162
H-2785.41................................................148-149 H-2817C ...........................................................333 H-2925A.1........................................................168 H-2969.8...........................................................162
H-2785.42................................................148-149 H-2817M .................................................217, 333 H-2925B............................................................168 H-2970.1...........................................................161
H-2818 ..............................................................222 H-2925B.1 ........................................................168 H-2970.2...........................................................161
H-2818HD........................................................222 H-2925C ...........................................................168 H-2970A ...........................................................161

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 339
INDEX Numerical
H-2971STN.............................................181-182 H-2987.6...........................................................182 H-3056.5...........................................................211 H-3206 ..............................................................284
H-2971U ..................................................181-182 H-2987.7...........................................................182 H-3056.6...........................................................211 H-3207 ..............................................................284
H-2972 ..............................................................182 H-2987.8...........................................................182 H-3056.10.........................................................211 H-3208 ..............................................................284
H-2975........................................181-182 H-2987.9...........................................................182 H-3058.1...........................................................211 H-3220A ...........................................................283
H-2975.1...........................................................182 H-2987H ..................................................181-182 H-3058.2...........................................................211 H-3221HA ........................................................283
H-2975.10.........................................................182 H-2987H.7........................................................182 H-3058.3F.........................................................211 H-3222 ..............................................................283
H-2975.11.........................................................182 H-2988A ...........................................................162 H-3058.4...........................................................211 H-3222M ..........................................................283
H-2975.12.........................................................182 H-2988A.4F......................................................162 H-3058.5...........................................................211 H-3230 ..............................................................197
H-2975.13.........................................................182 H-2992 ..............................................................181 H-3058.6...........................................................211 H-3230.16.........................................................197
H-2975.14.........................................................182 H-2992P............................................................181 H-3058.7...........................................................211 H-3230.16M.....................................................197
H-2975.15.........................................................182 H-2994 ..............................................................181 H-3058.8...........................................................211 H-3230.2...........................................................197
H-2975.16.........................................................182 H-2994P............................................................181 H-3059.3F.........................................................211 H-3230.3...........................................................197
H-2975.17.........................................................182 H-2999A ...........................................................160 H-3060 ..............................................................213 H-3230.4...........................................................197
H-2975.18.........................................................182 H-2999A.4F......................................................160 H-3060.1...........................................................214 H-3230.5...........................................................197
H-2975.19.........................................................182 H-3005 ..............................................................158 H-3061 ..............................................................214 H-3230.5M.......................................................197
H-2975.2...........................................................182 H-3007 ..............................................................158 H-3065 ..............................................................214 H-3230.7...........................................................197
H-2975.20.........................................................182 H-3009 ..............................................................158 H-3070 ..............................................................214 H-3230D...........................................................197
H-2975.21.........................................................182 H-3010 ..............................................................158 H-3072 ..............................................................214 H-3231 ..............................................................197
H-2975.22.........................................................182 H-3015 ..............................................................158 H-3072M ..........................................................214 H-3231D...........................................................197
H-2975.23.........................................................182 H-3020 ..............................................................158 H-3073 ..............................................................214 H-3240 ..............................................................221
H-2975.25.........................................................182 H-3021.24.........................................................158 H-3075 ..............................................................214 H-3240.2...........................................................221
H-2975.25N.....................................................182 H-3021.30.........................................................158 H-3080 ..............................................................214 H-3240.21M.....................................................221
H-2975.3...........................................................182 H-3021.36.........................................................158 H-3085 ..............................................................213 H-3240.21N.....................................................221
H-2975.4...........................................................182 H-3030A ...........................................................158 H-3085.1...........................................................214 H-3240.22.........................................................221
H-2975.6...........................................................182 H-3030CL .........................................................158 H-3085.1.1........................................................214 H-3240.3...........................................................221
H-2975.7...........................................................182 H-3032A ...........................................................158 H-3086 ..............................................................214 H-3240.4...........................................................221
H-2975.8...........................................................182 H-3032CL .........................................................158 H-3090 ..............................................................213 H-3240.4F.........................................................221
H-2975.9...........................................................182 H-3033A ...........................................................158 H-3100 ..............................................................214 H-3240.5...........................................................221
H-2975LM ........................................................182 H-3033CL .........................................................158 H-3110 ..............................................................214 H-3240.6...........................................................221
H-2975M ..........................................................182 H-3037 ..............................................................159 H-3120 ..............................................................213 H-3240.7...........................................................221
H-2977C ...........................................................161 H-3037PML......................................................159 H-3130 ..............................................................214 H-3241 ..............................................................220
H-2977S.12 ......................................................161 H-3038 ..............................................................159 H-3133 ..............................................................213 H-3241.1...........................................................220
H-2977S.6.........................................................161 H-3038PML......................................................159 H-3133.1...........................................................214 H-3241.2...........................................................220
H-2978 ..............................................................183 H-3039 ..............................................................159 H-3134 ..............................................................213 H-3241.5F.........................................................220
H-2978.01.........................................................183 H-3039P............................................................159 H-3134.1...........................................................214 H-3242 .................................................221
H-2978.03.........................................................183 H-3040 ..............................................................159 H-3135 ..............................................................213 H-3243A ...........................................................221
H-2983 ..............................................................190 H-3041 .....................................................155, 159 H-3135.1...........................................................214 H-3243B............................................................221
H-2984 ..............................................................190 H-3041.20................................................155, 159 H-3136 ..............................................................214 H-3244 ..............................................................221
H-2984.1...........................................................190 H-3041L ............................................................159 H-3137 ..............................................................213 H-3245 ..............................................................221
H-2984.2...........................................................190 H-3041S............................................................160 H-3137.1...........................................................214 H-3248 ..............................................................219
H-2984.3...........................................................190 H-3041SMA.....................................................160 H-3138 ..............................................................214 H-3248D...........................................................219
H-2984.4...........................................................190 H-3043.4...........................................................159 H-3147 ..............................................................214 H-3248D.4F .....................................................219
H-2984.5...........................................................190 H-3043.6...........................................................159 H-3150 ..............................................................209 H-3249A ...........................................................219
H-2984.6...........................................................190 H-3045.................................................160 H-3151 ..............................................................209
H-3152 ..............................................................209
H-3249A.16......................................................219
H-2984.7...........................................................190 H-3046 ..............................................................160 H-3250.3...........................................................219
H-2985 ..............................................................162 H-3046.1...........................................................160 H-3152.4...........................................................209 H-3250.3D........................................................219
H-2985.4F.........................................................162 H-3049 .......................................................66, 214 H-3154 ..............................................................209 H-3250.3D.4F..................................................219
H-2986A ...........................................................162 H-3050 ..............................................................213 H-3161 ..............................................................208 H-3250.4...........................................................219
H-2986A.4F......................................................162 H-3050.7...........................................................271 H-3161.4F.........................................................208 H-3250.4.3........................................................219
H-2987.1...........................................................182 H-3052 ..............................................................211 H-3162.5F.........................................................208 H-3250.4.4........................................................219
H-2987.10.........................................................182 H-3052.2...........................................................211 H-3176 ..............................................................196 H-3250.7...........................................................219
H-2987.11.........................................................182 H-3052.3...........................................................211 H-3185.1...........................................................196 H-3250.8...........................................................219
H-2987.12.........................................................182 H-3052.4...........................................................211 H-3185.1AC.....................................................196 H-3250D...........................................................219
H-2987.13.........................................................182 H-3052.45.........................................................211 H-3185.1AF......................................................196 H-3250D.4F .....................................................219
H-2987.14.........................................................182 H-3052.4F.........................................................211 H-3185.3A...............................................162, 196 H-3251 ..............................................................218
H-2987.15.........................................................182 H-3052.6...........................................................211 H-3185B.3 .....................................................1196 H-3251RC.........................................................218
H-2987.16.........................................................182 H-3052.9...........................................................211 H-3185SD.3 .....................................................196 H-3252 ..............................................................218
H-2987.17.........................................................182 H-3055 ..............................................................214 H-3185SH.........................................................196 H-3253 ..............................................................218
H-2987.18.........................................................182 H-3056.08.........................................................210 H-3185TA .........................................................196 H-3254 ..............................................................218
H-2987.19.........................................................182 H-3056.1...........................................................210 H-3185TM........................................................196 H-3255 ..............................................................218
H-2987.20.........................................................182 H-3056.10................................................210-211 H-3185TSA ......................................................196 H-3255S............................................................218
H-2987.21.........................................................182 H-3056.11.........................................................210 H-3195 ..............................................................196 H-3256 ..............................................................218
H-2987.22.........................................................182 H-3056.13.........................................................210 H-3198 ..............................................................196 H-3257 ..............................................................218
H-2987.23.........................................................182 H-3056.2...........................................................210 H-3198M ..........................................................196 H-3258DD........................................................218
H-2987.3...........................................................182 H-3056.3...........................................................210 H-3204 ..............................................................284
H-2987.4...........................................................182 H-3056.3F.........................................................210 H-3205.3F.........................................................284

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

340
Numerical INDEX
H-3260 ..............................................................219 H-3553 ..............................................................295 H-3655 ..............................................................152 H-3773 .......................................................54, 331
H-3264 ..............................................................220 H-3554 ..............................................................295 H-3655-20 ........................................................152 H-3774 .......................................................54, 331
H-3265 ..............................................................220 H-3557D...........................................................293 H-3655.D6024 ................................................152 H-3776 ..............................................................331
H-3267 ..............................................................220 H-3557D-P .......................................................293 H-3656 ..............................................................152 H-3780 ..............................................................329
H-3267.1...........................................................220 H-3558D...........................................................293 H-3658 ..............................................................154 H-3799 .......................................................54, 331
H-3270 ..............................................................218 H-3560D...........................................................293 H-3660 ..............................................................150 H-3800 .....................................................153, 331
H-3320 ..............................................................208 H-3564 ..............................................................293 H-3660.1...........................................................150 H-3801 ................................................................54
H-3340 ..............................................................205 H-3564.2...........................................................292 H-3661 ..............................................................150 H-3802 ................................................................54
H-3341 ..............................................................205 H-3564.3...........................................................292 H-3661.1...........................................................150 H-3803 ................................................................57
H-3342 ..............................................................205 H-3568 ..............................................................298 H-3662 ..............................................................150 H-3804 ................................................................57
H-3351...................................................63 H-3570A ...........................................................333
H-3575A ...........................................................298
H-3662.1...........................................................150 H-3804.200 ........................................................57
H-3353 ................................................................63 H-3663 ..............................................................150 H-3805 ..............................................................220
H-3354 ................................................................63 H-3580.2...........................................................292 H-3663.1...........................................................150 H-3805.2F.........................................................220
H-3355 ................................................................63 H-3590 ..............................................................291 H-3664 ..............................................................150 H-3805.5F.........................................................220
H-3356 ................................................................63 H-3591 ..............................................................291 H-3664.1...........................................................150 H-3806 ................................................................57
H-3357 ................................................................63 H-3593A ...........................................................291 H-3669.1P.........................................................150 H-3806.1.............................................................57
H-3358 ................................................................63 H-3595A ...........................................................291 H-3669.2P.........................................................150 H-3807 ................................................................57
H-3360 ................................................................61 H-3597A ...........................................................291 H-3669.3P.........................................................150 H-3807.325 ........................................................57
H-3361 ................................................................61 H-3599 ..............................................................291 H-3669.4P.........................................................150 H-3807.4.............................................................57
H-3362 ................................................................61 H-3599.2...........................................................292 H-3700 ..............................................................324 H-3807.5.............................................................57
H-3371 ................................................................63 H-3599.36.........................................................292 H-3705 ..............................................................324 H-3808 ................................................................57
H-3372 .......................................................63, 241 H-3600 ..............................................................209
H-3614B............................................................206
H-3707 ..............................................................324 H-3809 ...................................................57
H-3373A .............................................................61 H-3710 ..............................................................324 H-3809.200 ........................................................57
H-3373A.4F........................................................61 H-3614B.4F......................................................206 H-3712 ..............................................................324 H-3810 ..............................................................210
H-3380 ................................................................61 H-3620 ..............................................................206 H-3723 ..............................................................324 H-3811 ..............................................................210
H-3380.2.............................................................61 H-3621 ..............................................................206 H-3725 .....................................................153, 324 H-3812 ..............................................................210
H-3381 ................................................................61 H-3622 ..............................................................206 H-3727 ..............................................................328 H-3812CAL......................................................210
H-3383F..............................................................64 H-3622M ..........................................................206 H-3729 ..............................................................328 H-3813B............................................................210
H-3383L ..............................................................64 H-3623 ..............................................................206 H-3729TC.........................................................328 H-3813S............................................................210
H-3385 ................................................................64 H-3624 ..............................................................206 H-3730 ..............................................................328 H-3814 ..............................................................210
H-3386 ................................................................64 H-3624.5F.........................................................206 H-3730TC.........................................................328 H-3815 ..............................................................210
H-3387 ................................................................64 H-3624F............................................................206 H-3731 .......................................66, 90, 152, 328 H-3816.1M.......................................................210
H-3392 ................................................................64 H-3625 ..............................................................206 H-3731TC.........................................................328 H-3817 ..............................................................210
H-3393 ................................................................64 H-3630.18.........................................................209 H-3732 ..............................................................328 H-3817.20.........................................................210
H-3394 ................................................................64 H-3630.21.........................................................209 H-3732TC.........................................................328 H-3820 ..............................................................205
H-3395 ................................................................64 H-3630.3...........................................................209 H-3734 ..............................................................328 H-3820BX.........................................................205
H-3397 ..............................................................323 H-3630.4...........................................................209 H-3734TC.........................................................328 H-3821 ................................................................20
H-3398 ..............................................................323 H-3630A ...........................................................209 H-3735 ..............................................................328 H-3825 ..............................................................205
H-3399 ............................................148-149, 323 H-3631 ..............................................................209 H-3735TC.........................................................328 H-3825BX.........................................................205
H-3399XL..........................................................323 H-3635 ..............................................................152 H-3736 ..............................................................328 H-3839 .......................................................75, 240
H-3400 ................................................................64 H-3636 ..............................................................151 H-3736TC.........................................................328 H-3839.2F..................................................75, 240
H-3417 ................................................................69 H-3637.................................................152 H-3738 ..............................................................328
H-3740 ..............................................................332
H-3839.5F..................................................75, 240
H-3418 ................................................................69 H-3638 ..............................................................153 H-3840 ..............................................................214
H-3418.1.............................................................69 H-3639.20................................................153, 331 H-3742 ..............................................................332 H-3841 ..............................................................205
H-3418.2.............................................................69 H-3639.8..................................................153, 331 H-3743.10.........................................................332 H-3841.1..................................................205, 240
H-3418.3.............................................................69 H-3640 .....................................................153, 156 H-3743.9...........................................................332 H-3841.2..................................................205, 240
H-3419 ................................................................69 H-3640M ..........................................................153 H-3745 ..............................................................332 H-3841.2F.........................................................205
H-3420 ................................................................69 H-3640P............................................................153 H-3746 ..............................................................332 H-3841.5F.........................................................205
H-3421 ................................................................69 H-3643 ..............................................................152 H-3750.2F...........................................................80 H-3841.7...........................................................205
H-3422 ................................................................69 H-3645 ..............................................................152 H-3750.5F...........................................................80 H-3841DH........................................................240
H-3460 ................................................................64 H-3647 ..............................................................155 H-3750FS............................................................80 H-3841HW..............................................205, 240
H-3490A ...........................................................208 H-3647.2F.........................................................155 H-3753 .......................................................80, 160 H-3841WW.............................................205, 240
H-3491 ..............................................................208 H-3647.5F.........................................................155 H-3754A ...........................................................160 H-3842A ....................................................75, 240
H-3492A ...........................................................208 H-3648 ..............................................................155 H-3755 ..............................................................160 H-3842A.1........................................................240
H-3493A ...........................................................208 H-3648.2F.........................................................155 H-3755.2F.........................................................160 H-3842A.2........................................................240
H-3493AX.........................................................208 H-3648.5F.........................................................155 H-3755.5F.........................................................160 H-3842A.4F...............................................75, 240
H-3538D...........................................................294 H-3649 ..............................................................155 H-3756.2F...........................................................80 H-3842ADH.....................................................240
H-3540 ..............................................................295 H-3649.2F.........................................................155 H-3756.5F...........................................................80 H-3842AHW....................................................240
H-3541D...........................................................294 H-3649.5F.........................................................155 H-3757 ................................................................80 H-3842AWW...................................................240
H-3542A ...........................................................295 H-3650 ............................................150, 153, 160 H-3758 ................................................................80 H-3842HW.......................................................240
H-3543 .....................................................288-294 H-3651 ..............................................................153 H-3759 ................................................................80 H-3843A ....................................................75, 240
H-3547 ..............................................................295 H-3652 ..............................................................154 H-3760 .....................................................153, 329 H-3843A.1........................................................240
H-3550 ..............................................................295 H-3652R............................................................154 H-3761 ..............................................................329 H-3843A.2........................................................240
H-3552 ..............................................................295 H-3653 ..............................................................154 H-3762 ..............................................................329 H-3843A.4F...............................................75, 240
H-3654 ..............................................................154 H-3770 .......................................................54, 331 H-3843A.WW..................................................240
H-3654R............................................................154 H-3772 .......................................................54, 331 H-3843ADH.....................................................240

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 341
INDEX Numerical
H-3843AHW....................................................240 H-3912FS16.......................................................57 H-3945 ................................................................56 H-4053.2.............................................................31
H-3843HW.......................................................240 H-3912FS200 ....................................................57 H-3945RC...........................................................56 H-4053.3.............................................................31
H-3844 ..............................................................205 H-3912P..............................................................54 H-3945SP............................................................54 H-4053.4.............................................................31
H-3846A ...........................................................157 H-3912SC...........................................................54 H-3946 ................................................................56 H-4053.6.............................................................31
H-3846A.5F......................................................157 H-3912SP............................................................54 H-3946RC...........................................................56 H-4053.7.............................................................31
H-3846L ...................................................205, 240 H-3912SS............................................................54 H-3946SP............................................................54 H-4053.8.............................................................31
H-3847A ...........................................157 H-3912SSP .........................................................54
H-3913 Series.....................................................53
H-3947 ................................................................56
H-3947RC...........................................................56
H-4055 ................................................................31
H-3847A.2F......................................................157 H-4055.1.............................................................31
H-3847A.5F......................................................157 H-3913BC...........................................................54 H-3947SP............................................................54 H-4055.2.............................................................31
H-3847A.G.......................................................157 H-3913DSP ........................................................54 H-3948 ................................................................56 H-4055.3.............................................................31
H-3847AHS......................................................157 H-3913HP...........................................................54 H-3948M10........................................................56 H-4056 ................................................................31
H-3847AHS.2F................................................157 H-3913P..............................................................54 H-3948M200 .....................................................56 H-4057 ................................................................31
H-3847AHS.5F................................................157 H-3913SC...........................................................54 H-3949A .............................................................57 H-4100.10...........................................................55
H-3847AHS.G .................................................157 H-3913SP............................................................54 H-3949A.4F........................................................57 H-4100.12...........................................................55
H-3847AHT......................................................157 H-3913SS............................................................54 H-3950SS............................................................54 H-4100.14...........................................................55
H-3847AHT.2F ................................................157 H-3914 Series.....................................................52 H-3955SP............................................................54 H-4100.16...........................................................55
H-3847AHT.5F ................................................157 H-3914BC...........................................................54 H-3955SSP .........................................................54 H-4100.18...........................................................55
H-3847AHT.G..................................................157 H-3914P..............................................................54 H-3956SP............................................................54 H-4100.20...........................................................55
H-3849A ...........................................................157 H-3914SP............................................................54 H-3956SSP .........................................................54 H-4100.3.............................................................55
H-3849A.2F......................................................157 H-3915 Series.....................................................53 H-3960P..............................................................54 H-4100.4.............................................................55
H-3849A.5F......................................................157 H-3915BC...........................................................54 H-3960SS............................................................54 H-4100.5.............................................................55
H-3849A.G.......................................................157 H-3915P..............................................................54 H-3962 ................................................................38 H-4100.6.............................................................55
H-3849AHS......................................................157 H-3915SP............................................................54 H-3964 ................................................................38 H-4100.7.............................................................55
H-3849AHS.2F................................................157 H-3916 Series.....................................................53 H-3966 ................................................................38 H-4100.8.............................................................55
H-3849AHS.5F................................................157 H-3916BC...........................................................54 H-3967S.....................................................38, 324 H-4100C .............................................................55
H-3849AHS.G .................................................157 H-3916P..............................................................54 H-3969 ..............................................................324 H-4100P..............................................................55
H-3849AHT......................................................157 H-3916SP............................................................54
H-3919 Series.....................................................53
H-3970 ...................................................38 H-4101 ................................................................55
H-4102 ................................................................55
H-3849AHT.2F ................................................157 H-3971C .............................................................39
H-3849AHT.5F ................................................157 H-3919BC...........................................................54 H-3972 ................................................................39 H-4103 ................................................................55
H-3849AHT.G..................................................157 H-3919P..............................................................54 H-3973 ................................................................39 H-4103A .............................................................55
H-3849PC.........................................................157 H-3919SP............................................................54 H-3973.1.............................................................39 H-4104 ................................................................55
H-3849PL..........................................................157 H-3920 Series.....................................................46 H-3974 ................................................................39 H-4104A .............................................................55
H-3851.3F.........................................................204 H-3920FS16.......................................................57 H-3975 ................................................................38 H-4105 ................................................................55
H-3852.3F.........................................................204 H-3920FS200 ....................................................57 H-3976S..............................................................38 H-4105A .............................................................55
H-3853.3F.........................................................204 H-3920P..............................................................54 H-3977S..............................................................38 H-4106 ................................................................55
H-3854.3F.........................................................204 H-3922 Series.....................................................47 H-3978 ................................................................39 H-4107 ................................................................55
H-3855 ..............................................................217 H-3922P..............................................................54 H-3980 ................................................................38 H-4108 ................................................................55
H-3860.100 ........................................................67 H-3922SP............................................................54 H-3981 .......................................................38, 324 H-4109 ................................................................55
H-3860.19...........................................................67 H-3922SSP .........................................................54 H-3981P............................................................324 H-4109.4.............................................................55
H-3860D.............................................................67 H-3924 Series.....................................................52 H-3981S.....................................................38, 324 H-4109A .............................................................55
H-3860D.2F .......................................................67 H-3924SP............................................................54 H-3985 ................................................................38 H-4114.10...........................................................14
H-3860D.5F .......................................................67 H-3928 Series.....................................................52 H-3986 ................................................................38 H-4114.12...........................................................14
H-3865 ................................................................67 H-3928FS200 ....................................................56 H-3986S.....................................................38, 324 H-4114.4.............................................................14
H-3875 ................................................................68 H-3928FS200RC...............................................56 H-3987 ................................................................38 H-4114.6.............................................................14
H-3875.1.............................................................68 H-3928SP............................................................54 H-3988 ................................................................38 H-4114.8.............................................................14
H-3875.2.............................................................68 H-3929FS200 ....................................................56 H-3988AS...........................................................38 H-4114.MCU .....................................................14
H-3875.3.............................................................68 H-3929FS200RC...............................................56 H-3989 ................................................................38 H-4114SD.3F...............................................12-13
H-3875.5F...........................................................68 H-3929SP............................................................54
H-3930BC...........................................................54
H-3990 ................................................................38 H-4115 ...................................................80
H-3876 ................................................................68 H-3992 ................................................................38 H-4115.2.............................................................80
H-3880 ................................................................57 H-3930SC...........................................................54 H-3993S.....................................................38, 324 H-4115.3.............................................................80
H-3880.4F...........................................................57 H-3932 Series.....................................................47 H-3994 ................................................................39 H-4115.4.......................................................77, 80
H-3902 ................................................................55 H-3932P..............................................................54 H-3996S.....................................................39, 324 H-4115.5.............................................................80
H-3903 ................................................................55 H-3932PSS .........................................................54 H-4040.100M ....................................................31 H-4116 ................................................................21
H-3903.10...........................................................55 H-3932SP............................................................54 H-4040.150 ........................................................31 H-4117 ................................................................20
H-3903.100 ........................................................55 H-3932SSP .........................................................54 H-4040.150M ....................................................31 H-4120H .............................................................26
H-3903.20...........................................................55 H-3938 Series.....................................................52 H-4040.300 ........................................................31 H-4120H.3..........................................................26
H-3903.30...........................................................55 H-3938FS200 ....................................................56 H-4040.500 ........................................................31 H-4120H.4..........................................................26
H-3903.40...........................................................55 H-3938FS200RC...............................................56 H-4040.50M.......................................................31 H-4120HA ..........................................................26
H-3903.50...........................................................55 H-3938SP............................................................54 H-4050 ................................................................31 H-4121 ..............................................................241
H-3903.60...........................................................55 H-3942 ................................................................56 H-4051 ................................................................31 H-4122 ..............................................................241
H-3903.80...........................................................55 H-3942.200 ........................................................56 H-4052A.1..........................................................31 H-4122QF ........................................................241
H-3903C .............................................................55 H-3942.325 ........................................................56 H-4052A.2..........................................................31 H-4132 ..............................................................151
H-3903P..............................................................55 H-3942FS325 ....................................................56 H-4052A.3..........................................................31 H-4133 ..............................................................151
H-3910 Series.....................................................46 H-3942G.............................................................56 H-4052A.4..........................................................31 H-4133.15.........................................................151
H-3912 Series.....................................................47 H-3943 ................................................................56 H-4052A.6..........................................................31
H-3912BC...........................................................54 H-3943FS325 ....................................................56 H-4053.1.............................................................31

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

342
Numerical INDEX
H-4133.16.........................................................151 H-4159 ..........................................................77, 80 H-4199.A ............................................................74 H-4210.36...........................................................32
H-4133.17.........................................................151 H-4160B..............................................................79 H-4199.B.............................................................74 H-4210.3AW......................................................32
H-4133.18.........................................................151 H-4161A .......................................................77, 80 H-4199.C ............................................................74 H-4210.3AWJ....................................................32
H-4133.19.........................................................151 H-4163 ................................................................77 H-4199.D............................................................74 H-4210.3C..........................................................32
H-4133.20.........................................................151 H-4165 ................................................................84 H-4200 ................................................................27 H-4210.3NW .....................................................32
H-4133F............................................................151 H-4165.15...........................................................84 H-4200F..............................................................27 H-4210.3P...........................................................32
H-4133N...........................................................151 H-4165.16...........................................................84 H-4201 ................................................................20 H-4210.524 ........................................................32
H-4134 ..............................................................151 H-4165.20...........................................................84 H-4202.1.............................................................24 H-4210.530 ........................................................32
H-4134F............................................................151 H-4165.375 ........................................................84 H-4202.1A..........................................................24 H-4210.536 ........................................................32
H-4135 ................................................................39 H-4165.40...........................................................84 H-4202.22...........................................................24 H-4210.5C..........................................................32
H-4136 ................................................................39 H-4166 ................................................................21 H-4202.225 ........................................................24 H-4210.5NW .....................................................32
H-4137 ..............................................................157 H-4166.10...........................................................21 H-4202.25...........................................................24 H-4210.5P...........................................................32
H-4139 ................................................................25 H-4166.5.............................................................21 H-4202.3.............................................................24 H-4210.9.............................................................26
H-4140 ................................................................18 H-4166S..............................................................21 H-4202.3DP .......................................................24 H-4210A .............................................................26
H-4140.12...........................................................19 H-4167 ................................................................21 H-4202.4.............................................................24 H-4210E.2A .......................................................26
H-4140.20...........................................................19 H-4168 ................................................................21 H-4202.4SS ........................................................24 H-4210W............................................................32
H-4140.C ............................................................19 H-4169 ................................................................79 H-4202.5.......................................................24, 30 H-4212 ................................................................27
H-4141...................................................77 H-4169.100-B ....................................................79
H-4169.2415......................................................79
H-4202.5SS ........................................................24 H-4212MH.........................................................27
H-4142 ................................................................77 H-4202.6.............................................................24 H-4215 ................................................................74
H-4143 ..............................................................155 H-4169.2416......................................................79 H-4202.6A....................................................24, 30 H-4215.26...........................................................74
H-4143.025 ...............................................25, 155 H-4169.415 ........................................................79 H-4202.6SS ........................................................24 H-4215.2F...........................................................74
H-4143.033 ........................................................25 H-4169.416 ........................................................79 H-4202.6W.........................................................24 H-4215.32...........................................................74
H-4143.05..................................................25, 155 H-4169.4CA.................................................77, 80 H-4202.6WSS....................................................24 H-4215.5F...........................................................74
H-4143.1....................................................25, 155 H-4169.4F...........................................................79
H-4169.CA .........................................................79
H-4202.7A....................................................24, 32 H-4216 ...................................................66
H-4143.10..................................................25, 155 H-4202.8.......................................................24, 30 H-4219.100 ........................................................22
H-4143.20...........................................................25 H-4169CK...........................................................79 H-4202.8SS ........................................................24 H-4219.16...........................................................22
H-4143.25.........................................................155 H-4170B..............................................................79 H-4202A .............................................................24 H-4219.17...........................................................22
H-4143.33...........................................................25 H-4171 ................................................................79 H-4202AS...........................................................24 H-4219.2.............................................................22
H-4143.50..................................................25, 155 H-4172 ..........................................................78, 83 H-4202AX...........................................................24 H-4219.25...........................................................22
H-4143.75...........................................................25 H-4173 ................................................................79 H-4202SX ...........................................................24 H-4219.3.............................................................22
H-4143N.............................................................25 H-4174 ..........................................................78, 83 H-4203.3.............................................................21 H-4219.30...........................................................23
H-4144.12.........................................................331 H-4175 ..........................................................78, 83 H-4203.4.............................................................21 H-4219.4.............................................................22
H-4144.16.........................................................331 H-4176 ..........................................................78, 83 H-4203DT.3........................................................21 H-4219.5.............................................................22
H-4144.24.........................................................331 H-4177 ................................................................78 H-4203DT.4A.....................................................21 H-4219.8.......................................................22, 23
H-4144.8..................................................206, 331 H-4178 ..........................................................78, 82 H-4204 ................................................................26 H-4219.MAN.....................................................22
H-4145 ................................................................90 H-4178.2...........................................................140 H-4204.1.............................................................26 H-4219QC .........................................................22
H-4145.8.............................................................90 H-4178BR.....................................................78, 83 H-4204.3.............................................................26 H-4219QC.1......................................................22
H-4146 ................................................................90 H-4178F.4 ...........................................................33 H-4204.4.............................................................26 H-4219QC.12..............................................22, 23
H-4147 ................................................................78 H-4179 .............................................33, 76 H-4205 ................................................................27
H-4206 ..............................................................332
H-4219QC.18....................................................22
H-4148 ................................................................90 H-4179F.10.........................................................33 H-4219QC.2......................................................22
H-4148.6.............................................................90 H-4179F.20.........................................................33 H-4206A ...........................................................332 H-4219QC.7......................................................22
H-4148X..............................................................90 H-4180A .............................................................84 H-4207 ..............................................................332 H-4219T..............................................................22
H-4149 ................................................................77 H-4180B..............................................................84 H-4207A ...........................................................332 H-4219T.1...........................................................22
H-4150 ................................................................76 H-4180BD ..........................................................84 H-4208 ..............................................................332 H-4219T.12.........................................................22
H-4150.4F...........................................................76 H-4180D.............................................................84 H-4209 ..............................................................332 H-4219T.2...........................................................22
H-4151 ..........................................................77, 83 H-4183A ...........................................................327 H-4210.1.............................................................26 H-4219T.7...........................................................22
H-4152 ................................................................83 H-4184A ...........................................................327 H-4210.10...........................................................32 H-4220F..............................................................23
H-4152F..............................................................33 H-4185 ................................................................76 H-4210.12...........................................................32 H-4221 ................................................................25
H-4152F.1 ...........................................................33 H-4185.100 ........................................................76 H-4210.18...........................................................32 H-4221.1.............................................................25
H-4152F.2 ...........................................................33 H-4185.2.............................................................76 H-4210.230 ........................................................32 H-4221.2A..........................................................25
H-4152F.8 ...........................................................33 H-4185.2F...........................................................76 H-4210.236 ........................................................32 H-4221.3A..........................................................25
H-4152FM..........................................................33 H-4185.3.............................................................76 H-4210.24...........................................................32 H-4221.4.............................................................25
H-4153 ..........................................................78, 83 H-4185.5F...........................................................76 H-4210.253 ........................................................32 H-4222A ...........................................................332
H-4154 ..........................................................78, 83 H-4185.RT ..........................................................76 H-4210.256 ........................................................32 H-4222B............................................................332
H-4154FP............................................................78 H-4188 ................................................................30 H-4210.25AW ...................................................32 H-4222C ...........................................................332
H-4155A .............................................................76 H-4188F..............................................................30 H-4210.25C .......................................................32 H-4222D....................................................85, 332
H-4156 ................................................................83 H-4195 ................................................................27 H-4210.25P ........................................................32 H-4225 ................................................................77
H-4156J ........................................................33, 83 H-4195F..............................................................27 H-4210.2A..........................................................26 H-4226 ................................................................85
H-4156MA .........................................................83 H-4197 ................................................................74 H-4210.2AW......................................................32 H-4226.5F...........................................................85
H-4156MA.2F ...................................................83 H-4198 ................................................................74 H-4210.2AWJ....................................................32 H-4227 ................................................................25
H-4156MA.5F ...................................................83 H-4198.1.............................................................74 H-4210.2C..........................................................32 H-4227.1.............................................................25
H-4156SB ...........................................................33 H-4198.2F...........................................................74 H-4210.2P...........................................................32 H-4227.10...........................................................25
H-4158 ..........................................................78, 83 H-4198.5F...........................................................74 H-4210.30...........................................................32 H-4227.2.............................................................25
H-4158.1.......................33, 78, 83, 94, 142, 334 H-4199 ................................................................74 H-4210.353 ........................................................32 H-4227.3.............................................................25
H-4199.5F...........................................................74 H-4210.356 ........................................................32 H-4227.4.............................................................25
H-4199.7.............................................................74 H-4210.35C .......................................................32 H-4227.5.............................................................25

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 343
INDEX Numerical
H-4227.7.............................................................25 H-4273DP...........................................................43 H-4322 ..........................................................59-60 H-4352.4...........................................................325
H-4228 ................................................................85 H-4274B..............................................................43 H-4322.2F...........................................................59 H-4352.6...........................................................325
H-4229 ................................................................85 H-4274B.5F........................................................42 H-4322.5F...........................................................59 H-4353.2...........................................................325
H-4229P..............................................................85 H-4276A .......................................................42, 43 H-4324 ................................................................59 H-4353.4...........................................................325
H-4230 ................................................................85 H-4276A.5F........................................................42 H-4325 ..........................................................58, 60 H-4353.6...........................................................325
H-4230.1.............................................................85 H-4278 Series.....................................................44 H-4325.2F...........................................................58 H-4354.2...........................................................325
H-4231 ................................................................85 H-4283A .......................................................42, 43 H-4325.5F...........................................................58 H-4354.4...........................................................325
H-4231.1.............................................................85 H-4283A.5F........................................................42 H-4326 ................................................................59 H-4354.6...........................................................325
H-4231.2.............................................................85 H-4283P..............................................................43 H-4326.5F...........................................................59 H-4355.2...........................................................325
H-4232 ................................................................85 H-4283P3............................................................43 H-4327 ..........................................................59-60 H-4355.4...........................................................325
H-4233 ................................................................85 H-4283P4............................................................43 H-4327.2F...........................................................59 H-4355.6...........................................................325
H-4234 ................................................................85 H-4283SE ...........................................................43 H-4327.5F...........................................................59 H-4356.2...........................................................325
H-4235...................................................85 H-4284 ................................................................43
H-4284.5.............................................................43
H-4328 ................................................................57 H-4356.4...........................................................325
H-4236 ................................................................86 H-4328.2.............................................................57 H-4356.6...........................................................325
H-4236.1.............................................................86 H-4285 ................................................................43 H-4328.5F...........................................................57 H-4359A ...........................................................325
H-4236.2.............................................................86 H-4286 ................................................................43 H-4329.1.............................................................54 H-4360A.1........................................................299
H-4236.3.............................................................86 H-4287 ................................................................41 H-4329.5.............................................................54 H-4360A.10......................................................299
H-4236.4.............................................................86 H-4287.1.............................................................41 H-4330 ..........................................................58, 60 H-4360A.12......................................................299
H-4236.5.............................................................86 H-4287.2.............................................................41 H-4330.2F...........................................................58 H-4360A.2........................................................299
H-4236.6.............................................................86 H-4287.AL ..........................................................41 H-4330.5F...........................................................58 H-4360A.4........................................................299
H-4236.7.............................................................86 H-4288 ................................................................40 H-4334A.2..........................................................61 H-4360A.7........................................................299
H-4236.8.............................................................86 H-4288.1.......................................................41, 43 H-4334A.3..........................................................61 H-4361A.00......................................................299
H-4236.9.............................................................86 H-4288.3.............................................................41 H-4334A.3F........................................................61 H-4361A.10......................................................299
H-4237 ................................................................86 H-4288.4.............................................................41 H-4334A.4..........................................................61 H-4361A.4........................................................299
H-4237.5F...........................................................86 H-4288.7.............................................................41 H-4335F10 .........................................................61 H-4361A.7........................................................299
H-4238 ................................................................20 H-4288.8.............................................................41 H-4335F100.......................................................61 H-4362 ................................................................30
H-4238L ..............................................................20 H-4288FC...........................................................40 H-4335F12 .........................................................61 H-4368A .............................................................33
H-4239A .............................................................88 H-4289 ................................................................40 H-4335F120.......................................................61 H-4374 ................................................................87
H-4239A.4F........................................................88 H-4290 ................................................................40 H-4335F14 .........................................................61 H-4374.5F...........................................................87
H-4241 ................................................................88 H-4290.4.............................................................41 H-4335F140.......................................................61 H-4374.C ............................................................87
H-4242 ................................................................88 H-4290.5.............................................................41 H-4335F16 .........................................................61 H-4377 ................................................................35
H-4244 ................................................................88 H-4291 ................................................................40 H-4335F170.......................................................61 H-4377.1.............................................................35
H-4244RS ...........................................................88 H-4291.5.............................................................41
H-4292 ..............................................................298
H-4335F18 .........................................................61
H-4335F20 .........................................................61
H-4378 ...................................................87
H-4245 ................................................................20 H-4379 ................................................................87
H-4246 ................................................................20 H-4292.5F.........................................................298 H-4335F200.......................................................61 H-4379.5F...........................................................87
H-4247 ................................................................88 H-4293 ..........................................................40-41 H-4335F230.......................................................61 H-4385.1.............................................................34
H-4247.10...........................................................88 H-4294 .................................................298 H-4335F25 .........................................................61
H-4335F270.......................................................61
H-4385.5.............................................................34
H-4248 ................................................................20 H-4295A .............................................................43 H-4385D.............................................................34
H-4249 ................................................................20 H-4295A.5F........................................................43 H-4335F30 .........................................................61 H-4386 ................................................................34
H-4249P........................................................20, 21 H-4296 .....................................................239, 298 H-4335F325.......................................................61 H-4386SM..........................................................34
H-4250 ................................................................30 H-4296.4F................................................239, 298 H-4335F35 .........................................................61 H-4387 ................................................................34
H-4251 ................................................................30 H-4296A ...........................................43, 238, 298 H-4335F40 .........................................................61 H-4388 ................................................................34
H-4252.2.............................................................30 H-4296A .4F.....................................................238 H-4335F400.......................................................61 H-4388.1.............................................................34
H-4252.2E ..........................................................30 H-4296A.4F......................................................298 H-4335F45 .........................................................61 H-4391 ................................................................55
H-4252.3.............................................................30 H-4297A .............................................................43 H-4335F450.......................................................61 H-4391.004 ........................................................55
H-4252.4.............................................................30 H-4297A.5F........................................................43 H-4335F50 .........................................................61 H-4391.008 ........................................................55
H-4252.6.............................................................30 H-4299 .....................................................238, 298 H-4335F500.......................................................61 H-4391.010 ........................................................55
H-4252E..............................................................30 H-4299.4F................................................238, 298 H-4335F60 .........................................................61 H-4391.012 ........................................................55
H-4253 ................................................................84 H-4302 ................................................................43 H-4335F635.......................................................61 H-4391.020 ........................................................55
H-4254 ................................................................84 H-4305 ................................................................43 H-4335F70 .........................................................61 H-4391.1000......................................................55
H-4257 ................................................................75 H-4306 ................................................................43 H-4335F8............................................................61 H-4391.1250......................................................55
H-4258 ................................................................75 H-4307 ................................................................43 H-4335F80 .........................................................61 H-4391.1500......................................................55
H-4259 ..............................................................333 H-4308 ..............................................................324 H-4340 ................................................................87 H-4391.250 ........................................................55
H-4260A .............................................................88 H-4309 ..............................................................324 H-4340.1.............................................................87 H-4391.2500......................................................55
H-4260A.4F........................................................88 H-4310 ..........................................................59, 60 H-4340.2.............................................................87 H-4391.312 ........................................................55
H-4262 ................................................................84 H-4312 ................................................................60 H-4340.2.6..........................................................87 H-4391.3500......................................................55
H-4262P..............................................................84 H-4312.4F...........................................................60 H-4340.3.............................................................87 H-4391.375 ........................................................55
H-4264 ................................................................89 H-4315A .............................................................60 H-4340.4.............................................................87 H-4391.4000......................................................55
H-4265 ................................................................88 H-4315A.5F........................................................60 H-4340.5.............................................................87 H-4391.438 ........................................................55
H-4266 ................................................................88 H-4320 ..........................................................59-60 H-4341 ................................................................87 H-4391.500 ........................................................55
H-4268 ................................................................30 H-4320.2F...........................................................59 H-4342 ................................................................87 H-4391.625 ........................................................55
H-4269 ................................................................30 H-4320.4.............................................................59 H-4342.2.............................................................87 H-4391.750 ........................................................55
H-4270 ................................................................89 H-4320.5F...........................................................59 H-4351.2...........................................................325 H-4392 ................................................................66
H-4273B........................................................42, 43 H-4321 ..........................................................59-60 H-4351.4...........................................................325 H-4392.10.2 .......................................................66
H-4273B.5F........................................................42 H-4321.2F...........................................................59 H-4351.6...........................................................325
H-4273CP...........................................................43 H-4321.5F...........................................................59 H-4352.2...........................................................325

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

344
Numerical INDEX
H-4392.14.4 .......................................................66 H-4452 ................................................................29 H-4791 ..............................................................222 H-4888WS........................................................313
H-4392.19.7 .......................................................66 H-4453 ................................................................29 H-4825 ..............................................................311 H-4888WST .....................................................313
H-4392.26.3 .......................................................66 H-4454.001 ......................................................142 H-4830 ..............................................................311 H-4889 .................................................330
H-4392.33.9 .......................................................66 H-4454.001D...................................................142 H-4835 ..............................................................311 H-4889.100G...................................................313
H-4392.4.9..........................................................66 H-4454.002 ......................................................142 H-4886SS..........................................................313 H-4889.100GT ................................................313
H-4392.7.2..........................................................66 H-4454.002D...................................................142 H-4886SSC ......................................................313 H-4889.100KG................................................313
H-4393 ................................................................40 H-4454.005 .............................................122, 142 H-4887SS..........................................................313 H-4889.100KGT .............................................313
H-4393.1.............................................................41 H-4454.005D...................................................142 H-4887SST .......................................................313 H-4889.10G.....................................................313
H-4394 ................................................................41 H-4454.010 ......................................................142 H-4888.100G...................................................313 H-4889.10GT...................................................313
H-4398 Series.....................................................44 H-4454.010D...................................................142 H-4888.100GT ................................................313 H-4889.10KG ..................................................313
H-4410QC .........................................................28 H-4454.020 ......................................33, 122, 142 H-4888.10G.....................................................313 H-4889.10KGT................................................313
H-4410TH...........................................................28 H-4454.020D...................................................142 H-4888.10GT...................................................313 H-4889.150G...................................................313
H-4411QC .........................................................28 H-4454.050 .............................33, 122, 142, 235 H-4888.10KG ..................................................313 H-4889.150GT ................................................313
H-4411TH...........................................................28 H-4454.050D..........................................142, 235 H-4888.10KGT................................................313 H-4889.150KG................................................313
H-4412QC .........................................................28 H-4454.100 .............................83, 142, 236, 235 H-4888.150G...................................................313 H-4889.150KGT .............................................313
H-4412TH...........................................................28 H-4454.100D..........................................142, 235 H-4888.150GT ................................................313 H-4889.15KG ..................................................313
H-4413QC .........................................................28 H-4454.200 ......................................................142 H-4888.15KG ..................................................313 H-4889.15KGT................................................313
H-4413TH...........................................................28 H-4454.200D...................................................142 H-4888.15KGT................................................313 H-4889.160G...................................................313
H-4414QC .........................................................28 H-4460 ..............................................94, 142, 334 H-4888.160G...................................................313 H-4889.160GT ................................................313
H-4414TH...........................................................28 H-4461A ..................................................142, 334 H-4888.160GT ................................................313 H-4889.16KG ..................................................313
H-4416.2.............................................................29 H-4462 .....................................................142, 334 H-4888.16KG ..................................................313 H-4889.16KGT................................................313
H-44163..............................................29 H-4463 ............................................122, 142, 334
H-4464 .....................................................142, 334
H-4888.16KGT................................................313 H-4889.180KG................................................313
H-4418.23...........................................................29 H-4888.1KG.....................................................313 H-4889.180KGT .............................................313
H-4418.24...........................................................29 H-4465 .....................................................142, 334 H-4888.1KGT ..................................................313 H-4889.1KG.....................................................313
H-4418.33...........................................................29 H-4465.12................................................142, 334 H-4888.200G...................................................313 H-4889.1KGT ..................................................313
H-4418.34...........................................................29 H-4465.12CC ..........................................104,106 H-4888.200GT ................................................313 H-4889.200G...................................................313
H-4419.23...........................................................29 H-4465.25................................................142, 334 H-4888.20G.....................................................313 H-4889.200GT ................................................313
H-4419.24...........................................................29 H-4465.50.........................................................334 H-4888.20GT...................................................313 H-4889.200KG................................................313
H-4419.33...........................................................29 H-4466 .....................................................142, 334 H-4888.20KG ..................................................313 H-4889.200KGT .............................................313
H-4419.34...........................................................29 H-4466.10................................................142, 334 H-4888.20KGT................................................313 H-4889.20G.....................................................313
H-4420QC .........................................................28 H-4466.15................................................142, 334 H-4888.24KG ..................................................313 H-4889.20GT...................................................313
H-4420TH...........................................................28 H-4466.2..................................................142, 334 H-4888.24KGT................................................313 H-4889.20KG ..................................................313
H-4421QC .........................................................28 H-4466.20................................................142, 334 H-4888.25KG ..................................................313 H-4889.20KGT................................................313
H-4421TH...........................................................28 H-4466.30................................................142, 334 H-4888.25KGT................................................313 H-4889.24KG ..................................................313
H-4422QC .........................................................28 H-4466.5..................................................142, 334 H-4888.2KG.....................................................313 H-4889.24KGT................................................313
H-4422TH...........................................................28 H-4466.6..................................................142, 334 H-4888.2KGT ..................................................313 H-4889.250KG................................................313
H-4423QC .........................................................28 H-4470 ..............................................33, 142, 334 H-4888.300G...................................................313 H-4889.250KGT .............................................313
H-4423TH...........................................................28 H-4471 ..............................................94, 142, 334 H-4888.300GT ................................................313 H-4889.25KG ..................................................313
H-4424QC .........................................................28 H-4471CC ................................................104,106 H-4888.30G.....................................................313 H-4889.25KGT................................................313
H-4424TH...........................................................28 H-4480A ...........................................................312 H-4888.30GT...................................................313 H-4889.2KG.....................................................313
H-4430QC .........................................................28 H-4490A ...........................................................312 H-4888.30KG ..................................................313 H-4889.2KGT ..................................................313
H-4430TH...........................................................28 H-4603 ..............................................................311 H-4888.30KGT................................................313 H-4889.300G...................................................313
H-4431QC .........................................................28 H-4603C ...........................................................312 H-4888.3KG.....................................................313 H-4889.300GT ................................................313
H-4431TH...........................................................28 H-4603CC ........................................................312 H-4888.3KGT ..................................................313 H-4889.30G.....................................................313
H-4432QC .........................................................28 H-4604 ..............................................................311 H-4888.400G...................................................313 H-4889.30GT...................................................313
H-4432TH...........................................................28 H-4605 ..............................................................311 H-4888.400GT ................................................313 H-4889.30KG ..................................................313
H-4433QC .........................................................28 H-4609.................................................312 H-4888.40G.....................................................313
H-4888.40GT...................................................313
H-4889.30KGT................................................313
H-4433TH...........................................................28 H-4615P............................................................312 H-4889.3KG.....................................................313
H-4434QC .........................................................28 H-4615S............................................................312 H-4888.4KG.....................................................313 H-4889.3KGT ..................................................313
H-4434TH...........................................................28 H-4621 ..............................................................312 H-4888.4KGT ..................................................313 H-4889.400G...................................................313
H-4442QC .........................................................28 H-4660 ..............................................................311 H-4888.500G...................................................313 H-4889.400GT ................................................313
H-4442TH...........................................................28 H-4660.1...........................................................312 H-4888.500GT ................................................313 H-4889.40G.....................................................313
H-4443QC .........................................................28 H-4660.10.........................................................312 H-4888.50G.....................................................313 H-4889.40GT...................................................313
H-4443TH...........................................................28 H-4660.2...........................................................312 H-4888.50GT...................................................313 H-4889.40KG ..................................................313
H-4444QC .........................................................28 H-4660.5...........................................................312 H-4888.5KG.....................................................313 H-4889.40KGT................................................313
H-4444TH...........................................................28 H-4665 ..............................................................311 H-4888.5KGT ..................................................313 H-4889.4KG.....................................................313
H-4445QC .........................................................28 H-4665.1...........................................................312 H-4888.600G...................................................313 H-4889.4KGT ..................................................313
H-4445TH...........................................................28 H-4665.2...........................................................312 H-4888.600GT ................................................313 H-4889.500G...................................................313
H-4447QC .........................................................28 H-4665.3...........................................................312 H-4888.60G.....................................................313 H-4889.500GT ................................................313
H-4447TH...........................................................28 H-4665.4...........................................................312 H-4888.60GT...................................................313 H-4889.50G.....................................................313
H-4449 ................................................................29 H-4732 ..............................................................312 H-4888.70G.....................................................313 H-4889.50GT...................................................313
H-4449QC .........................................................28 H-4732SC.........................................................312 H-4888.70GT...................................................313 H-4889.50KG ..................................................313
H-4449TH...........................................................28 H-4739 ..............................................................311 H-4888.80G.....................................................313 H-4889.50KGT................................................313
H-4451 ................................................................29 H-4748A ...........................................................312 H-4888.80GT...................................................313 H-4889.5KG.....................................................313
H-4785 ..............................................................311 H-4888.8KG.....................................................313 H-4889.5KGT ..................................................313
H-4790 ..............................................................222 H-4888.8KGT ..................................................313 H-4889.600G...................................................313

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 345
INDEX Numerical
H-4889.600GT ................................................313 H-4915.025 ...............................................85, 322 H-4937 ..............................................................325 H-8342 ..............................................................272
H-4889.60G.....................................................313 H-4915.050 ......................................................322 H-4938 .......................................................90, 325 H-8390 ..............................................................272
H-4889.60GT...................................................313 H-4915.100 ....................................272-273, 322 H-4939 ..............................................................325 H-8522 ..............................................................272
H-4889.60KG ..................................................313 H-4915.1M.......................................................322 H-4939.5...........................................................325 H-8572 .....................................................272-273
H-4889.60KGT................................................313 H-4915.250 ...............................................90, 322 H-4940.2...........................................................325 H-8900 .....................................................269, 271
H-4889.70G.....................................................313 H-4915.2M.......................................................322 H-4940.4...........................................................325 H-8900 Series.....................................................44
H-4889.70GT...................................................313 H-4915.500 ......................................................322 H-4940.6....................................................66, 325 H-8950 ..............................................................269
H-4889.75KG ..................................................313
H-4889.75KGT................................................313
H-4916P.010 ....................................................322
H-4916P.025 ....................................................322
H-4940.8...........................................................325 H-8980 .................................................269
H-4941 ..............................................................325 H- 21170 ...........................................................312
H-4889.80G.....................................................313 H-4916P.050 ....................................................322 H-4942 ............................................269, 277, 321 H-12090............................................................237
H-4889.80GT...................................................313 H-4916P.100 ....................................................322 H-4942.4F.........................................................321 H-17270............................................................333
H-4889.80KG ..................................................313 H-4916P.1M .....................................................322 H-4942S............................................................321 H-17280............................................................333
H-4889.80KGT................................................313 H-4916P.250 .............................................90, 322 H-4942S.4F ......................................................321 H-17300............................................................333
H-4889.8KG.....................................................313 H-4916P.2M .....................................................322 H-4943 .....................................................277, 321 H-17301............................................................333
H-4889.8KGT ..................................................313 H-4916P.500 ....................................................322 H-4943.4F.........................................................321 H-17302............................................................333
H-4890A ...........................................330 H-4917.1M.......................................................323
H-4917.250 ......................................................323
H-4943S............................................................321 H-18355............................................................273
H-4891 ..............................................................330 H-4943S.4F ......................................................321 H-21212...................................................272, 273
H-4892 ..............................................................330 H-4917.2M.......................................................323 H-4944S............................................................321 H-21220............................................................269
H-4893 ..............................................................330 H-4917.4M.......................................................323 H-4944S.4F ......................................................321 H-21222............................................................273
H-4894 ..............................................................330 H-4917.500 ......................................................323 H-4945AS.........................................................321 H-21232...................................................272, 273
H-4895 ..............................................................330 H-4920.060 ......................................................326 H-4945AS.4F ...................................................321 H-21335............................................................271
H-4896 ..............................................................330 H-4920.125 ......................................................326 H-4947AC ...............................................320, 334 H-21370............................................................271
H-4896C ...........................................................330 H-4920.1M.......................................................326 H-4947AN...............................................320, 334 H-21700...................................................272, 273
H-4897C ...........................................................330 H-4920.250 ......................................................326 H-4948 ..............................................................321 H-25865............................................................269
H-4898C ...........................................................330 H-4920.2M.......................................................326 H-4949 ..............................................................321 H-25885............................................................273
H-4900 ..............................................................330 H-4920.500 ......................................................326 H-4952 ..............................................................321 H-30100............................................................314
H-4901 ..............................................................153 H-4921.060 ......................................................326 H-4952.4F.........................................................321 H-30100.4F ......................................................314
H-4902 ..............................................................330 H-4921.125 ......................................................326 H-4953 ..............................................................321 H-30100E .........................................................315
H-4903 ..............................................................330 H-4921.1M.......................................................326 H-4953.4F.........................................................321 H-30100E.4F....................................................315
H-4904 .......................................................85, 329 H-4921.250 ......................................................326 H-4954 ..............................................................321 H-30105............................................................314
H-4905A ...........................................................330 H-4921.2M.......................................................326 H-4955A ...........................................................321 H-30105.4F ......................................................314
H-4906 .......................................................66, 329 H-4921.500 ......................................................326 H-4955A.4F......................................................321 H-30105E .........................................................315
H-4907 ..............................................................329 H-4922.020 ......................................................326 H-4960 ..............................................................327 H-30105E.4F....................................................315
H-4908 ..............................................................329 H-4922.030 ......................................................326 H-4960P............................................................327 H-30110............................................................314
H-4910 ..............................................................329 H-4922.050 ......................................................326 H-4961 ..............................................................327 H-30110.4F ......................................................314
H-4911.050 ......................................................322 H-4922.075 ......................................................326 H-4961P............................................................327 H-30110E .........................................................315
H-4911.100 ......................................................322 H-4922.100 ......................................................326 H-4962 ..............................................................327 H-30110E.4F....................................................315
H-4911.1M.......................................................322 H-4922.1M.......................................................326 H-4963.11...........................................................35 H-30115............................................................314
H-4911.250 ......................................................322 H-4922.250 ......................................................326 H-4963.14.....................................................35, 65 H-30115.4F ......................................................314
H-4911.2M.......................................................322 H-4922.500 ......................................................326 H-4963.15.....................................................35, 65 H-30115E .........................................................315
H-4911.3M.......................................................322 H-4922C.020...................................................326 H-4963.16A..................................................35, 65 H-30115E.4F....................................................315
H-4911.400 ......................................................322 H-4922C.030...................................................326 H-4963B........................................................35, 65 H-30120............................................................314
H-4911.4M.......................................................322 H-4922C.050...................................................326 H-4963G.......................................................35, 65 H-30120.4F ......................................................314
H-4911.600 .............................................268, 322 H-4922C.075...................................................326 H-4965A .......................................................35, 65 H-30120E .........................................................315
H-4911.800 .............................................269, 322 H-4922C.100...................................................326 H-4966 ..........................................................35, 65 H-30120E.4F....................................................315
H-4912P.050 ....................................................322 H-4922C.1M....................................................326 H-4967 ..........................................................35, 65 H-30125............................................................314
H-4912P.100 ....................................................322 H-4922C.250...................................................326 H-4967.1.......................................................35, 65 H-30125.4F ......................................................314
H-4912P.1M .....................................................322 H-4922C.500...................................................326 H-4967.2.......................................................35, 65 H-30125E .........................................................315
H-4912P.250 ....................................................322 H-4923.1M.......................................................326 H-4968 ..........................................................35, 65 H-30125E.4F....................................................315
H-4912P.2M .....................................................322 H-4923.2M.......................................................326 H-4970 ..............................................................330 H-30128............................................................314
H-4912P.400 ....................................................322 H-4923.500 ......................................................326 H-4973 ..............................................................329 H-30128.4F ......................................................314
H-4912P.600 ....................................................322 H-4924.040 ......................................................326 H-4974 ..............................................................329 H-30128E .........................................................315
H-4913.1M..............................................209, 323 H-4924.100 ......................................................326 H-4975 ..............................................................330 H-30128E.4F....................................................315
H-4913.1MS.....................................................323 H-4924.200 ......................................................326 H-4976 ..............................................................330 H-30131............................................................314
H-4913.250 ......................................................323 H-4924.300 ......................................................326 H-4978 ................................................................65 H-30131.4F ......................................................314
H-4913.250S....................................................323 H-4926 ........................................263, 327 H-4982 ..............................................................332
H-4983 ..............................................................332
H-30131E .........................................................315
H-4913.2M.......................................................323 H-4927 .....................................................263, 327 H-30131E.4F....................................................315
H-4913.2MS.....................................................323 H-4928 .....................................................263, 327 H-4998 ..............................................................272 H-30135............................................................316
H-4913.4M..............................................276, 323 H-4929 .....................................................263, 327 H-5236 ................................................................86 H-30135.4F ......................................................316
H-4913.4MS.....................................................323 H-4930.120 ......................................................327 H-5237 ................................................................86 H-30135E .........................................................316
H-4913.500 .............................................273, 323 H-4930.250 ...............................................85, 327 H-5237.5F...........................................................86 H-30135E.4F....................................................316
H-4913.500S....................................................323 H-4930.500 ......................................................327 H-5550 ..............................................................271 H-30140............................................................316
H-4914.04.........................................................327 H-4930.765 ......................................................327 H-5605X............................................................271 H-30140.4F ......................................................316
H-4914.08.........................................................327 H-4930.M1285................................................327 H-6220 ............................................269, 272-273 H-30140E .........................................................316
H-4914.16.........................................................327 H-4934 ..............................................................325 H-8002 ..............................................................273
H-4915.010 ......................................................322 H-4936 ..............................................................325 H-8325 .....................................................272-273

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

346
Numerical INDEX
H-30140E.4F....................................................316 H-32333.8F.3 ...................................................317 HA-5110 ...........................................................244 HB-3535............................................................306
H-30145...................................................256, 316 H-32333.8F.3.DIG2 ........................................317 HA-5111 ...........................................................244 HB-3535.4F......................................................306
H-30068.1.........................................................255 H-32333.8F.DIG2............................................317 HA-5112 ...........................................................244 HB-4506A..................................................62, 306
H-30068.12 ......................................................255 H-32333.9F.3 ...................................................317 HA-5113 ...........................................................244 HB-4506A.4F............................................62, 306
H-30068.2.........................................................255 H-32333.9F.3.DIG2 ........................................317 HA-5114 ...........................................................245 HB-4506RB ......................................................306
H-30068.2F ......................................................255 H-32343.1.........................................................317 HA-5115 ...........................................................245 HB-4506RF.......................................................306
H-30068.3.........................................................255 H-32343.2.........................................................317 HA-5116 ...........................................................245 HB-4506T .........................................................306
H-30068.5F ......................................................255 H-32343.2F ......................................................317 HA-5117 ...........................................................245 HB-4508A..................................................62, 306
H-30068.6.........................................................255 H-32343.2F.3 ...................................................317 HA-5118 ...........................................................245 HB-4508A.4F............................................62, 306
H-30068.7.........................................................255 H-32343.2F.3.DIG2 ........................................317 HA-5119 ...........................................................245 HB-4510A.........................................................306
H-30068.8.........................................................255 H-32343.2F.DIG2............................................317 HA-5120 ...........................................................245 HB-4510A.4F...................................................306
H-30068.9.........................................................255 H-32343.8F ......................................................317 HA-5121 ...........................................................245 HB-4528A.........................................................308
H-30069.2F ......................................................255 H-32343.8F.3 ...................................................317 HA-5200.7F......................................................243 HB-4528A.4F...................................................308
H-30069.5F ......................................................255 H-32343.8F.3.DIG2 ........................................317 HA-5300.1........................................................246 HB-4529A.........................................................308
H-30145.4F .............................................256, 316 H-32343.8F.DIG2............................................317 HA-5300.11......................................................246 HB-4529A.4F...................................................308
H-30145E ................................................256, 316 H-32343.9F.3 ...................................................317 HA-5300.12......................................................246 HB-4530A.........................................................308
H-30145E.4F...........................................256, 316 H-32343.9F.3.DIG2 ........................................317 HA-5300.13......................................................246 HB-4530A.4F...................................................308
H-30145S.................................................256, 316
H-30150...................................................256, 316
HA-1060.4F...............................259 HA-5300.2........................................................246
HA-5300.3........................................................246
HB-4532A.........................................................308
HA-1061 ...........................................................261 HB-4532A.4F...................................................308
H-30155...................................................256, 316 HA-1062 ...........................................................261 HA-5300.4........................................................246 HB-4534A.........................................................308
H-30160.4F ......................................................316 HA-1063 ...........................................................261 HA-5300.4F......................................................246 HB-4534A.4F...................................................308
H-30160E.4F....................................................316 HA-1068.3F......................................................268 HA-5300.5........................................................246 HB-4535A.........................................................308
H-30160SS.4F .................................................316 HA-1665 ...........................................................238 HA-5300.6........................................................246 HB-4535A.4F...................................................308
H-30181...................................................256, 316 HA-1666 ...........................................................238 HA-5300.7........................................................246 HB-4539B.........................................................305
H-30200............................................................320 HA-1667 ...........................................................238 HA-5300.8........................................................246 HB-4539B.4F...................................................305
H-30200.4F ......................................................320 HA-3056.1........................................................211 HA-5300.9........................................................246 HB-4540B.........................................................305
H-30201............................................................320 HA-3056.2........................................................211 HA-5400.1...............................................248-249 HB-4540B.4F...................................................305
H-30201.4F ......................................................320 HA-3056.3........................................................211 HA-5400.2........................................................248 HB-4541B.........................................................305
H-30204.4F ......................................................320 HA-3056.3F......................................................211 HA-5400.3........................................................249 HB-4541B.2 ............................................305, 307
H-30209.4F ......................................................320 HA-3056.4........................................................211 HA-5400.3F......................................................249 HB-4541B.4F...................................................305
H-30322............................................319 HA-3056.5........................................................211 HA-5500.2F.3...................................................248
HA-5500.7F.3...................................................248
HB-4543B..................................................63, 306
H-30322.4F ......................................................319 HA-3056.6........................................................211 HB-4543B.4F............................................63, 306
H-30324.4F ......................................................319 HA-3056.7........................................................211 HA-5600 ...........................................................252 HB-4545B..................................................63, 306
H-30326.4F ......................................................319 HA-3056.8........................................................211 HA-5600.1........................................................252 HB-4545B.1 .....................................................306
H-30328.4F ......................................................319 HA-4425 .......................................................58, 60 HA-5600.2........................................................252 HB-4545B.2 .....................................................306
H-30214.4F ......................................................320 HA-4425.2F........................................................58 HA-5600.3........................................................252 HB-4545B.3 ............................................305-307
H-30215.4F ......................................................320 HA-4425.5F........................................................58 HA-5600.4........................................................252 HB-4545B.4F............................................63, 306
H-30216.4F ......................................................320 HA-4425V.....................................................58, 60 HA-5600.5........................................................252 HB-4546B.........................................................306
H-30356............................................................318 HA-4425V.2F......................................................58 HA-5600.5F......................................................252 HB-4546B.4F...................................................306
H-30356.4F ......................................................318 HA-4425V.5F......................................................58 HA-5600.6........................................................252
HA-5700.2........................................................247
HB-4620...........................................303
H-30360............................................................318 HA-4430 .......................................................58, 60 HB-4620.1 ........................................................303
H-30360.4F ......................................................318 HA-4430.2F........................................................58 HA-5700.3........................................................247 HB-4620.2 ........................................................303
H-30364.4F ......................................................318 HA-4430.5F........................................................58 HA-5700.4........................................................247 HB-4620.3 ........................................................303
H-30366.4F ......................................................318 HA-4430V.....................................................58, 60 HA-5700.5........................................................247 HB-4620.4 ........................................................303
H-30368.4F ......................................................318 HA-4430V.2F......................................................58 HA-5700.5F......................................................247 HB-4620.4F......................................................303
H-32300.1.........................................................317 HA-4430V.5F......................................................58 HA-5700.6........................................................247 HB-4620.5 ........................................................303
H-32300.2.........................................................317 HA-5000 ...........................................................250 HA-5700.7........................................................247 HB-4621............................................................303
H-32300.2F ......................................................317 HA-5000.1........................................................250 HA-5950.1........................................................251 HB-4621.4F......................................................303
H-32300.2F.3 ...................................................317 HA-5000.10......................................................250 HA-5950.10......................................................251 HB-4622............................................................303
H-32300.2F.3.DIG2 ........................................317 HA-5000.11......................................................250 HA-5950.11......................................................251 HB-4622.4F......................................................303
H-32300.2F.DIG2............................................317 HA-5000.12......................................................250 HA-5950.12......................................................251 HB-4623............................................................303
H-32300.8F ......................................................317 HA-5000.13......................................................250 HA-5950.13......................................................251 HB-4623.4F......................................................303
H-32300.8F.3 ...................................................317 HA-5000.14......................................................250 HA-5950.14......................................................251 HB-4624............................................................303
H-32300.8F.3.DIG2 ........................................317 HA-5000.15......................................................250 HA-5950.15......................................................251 HB-4624.4F......................................................303
H-32300.8F.DIG2............................................317 HA-5000.16......................................................250 HA-5950.2........................................................251 HB-4625............................................................303
H-32300.9F.3 ...................................................317 HA-5000.17......................................................250 HA-5950.3........................................................251 HB-4625.4F......................................................303
H-32300.9F.3.DIG2 ........................................317 HA-5000.2........................................................250 HA-5950.4........................................................251 HB-4626............................................................303
H-32333.1.........................................................317 HA-5000.3........................................................250 HA-5950.4F......................................................251 HB-4626.4F......................................................303
H-32333.2.........................................................317 HA-5000.4........................................................250 HA-5950.5........................................................251 HB-4627............................................................303
H-32333.2F ......................................................317 HA-5000.4F......................................................250 HA-5950.6........................................................251 HB-4627.4F......................................................303
H-32333.2F.3 ...................................................317 HA-5000.5........................................................250 HA-5950.7........................................................251 HB-4628............................................................303
H-32333.2F.3.DIG2 ........................................317 HA-5000.6........................................................250 HA-5950.8........................................................251 HB-4628.4F......................................................303
H-32333.2F.DIG2............................................317 HA-5000.8........................................................250 HA-5950.9........................................................251 HB-4629............................................................303
H-32333.8F ......................................................317 HA-5000.9........................................................250 HB-3515 ....................................62, 306 HB-4629.4F......................................................303
HA-5100.3F......................................................242 HB-3515.4F...............................................62, 306 HB-4630............................................................303
HA-5105 ...........................................................244 HB-3515.RS......................................................306 HB-4630.4F......................................................303

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 347
INDEX Numerical
HB-4634A.........................................................310 HB-4730USB ...................................................307 HB-4909............................................................304 HB-5315AC .....................................................302
HB-4634A.4F...................................................310 HB-4731............................................................307 HB-4909.4F......................................................304 HB-5315AC.4F................................................302
HB-4634AWB .................................................310 HB-4731.4F......................................................307 HB-4910............................................................304 HB-5322A.........................................................302
HB-4634AWB.4F............................................310 HB-4732............................................................307 HB-4910.4F......................................................304 HB-5322A.4F...................................................302
HB-4635A.........................................................310 HB-4732.4F......................................................307 HB-4911............................................................304 HB-5322AC .....................................................302
HB-4635A.4F...................................................310 HB-4733............................................................307 HB-4911.4F......................................................304 HB-5322AC.4F................................................302
HB-4635AWB .................................................310 HB-4733.4F......................................................307 HB-4912............................................................304 HB-5342A.........................................................302
HB-4635AWB.4F............................................310 HB-4740A.........................................................303 HB-4912.4F......................................................304 HB-5342A.4F...................................................302
HB-4635C.........................................................310 HB-4740A.4F...................................................303 HB-4930............................................................310 HB-5342AC .....................................................302
HB-4636A.........................................................310 HB-4741A.........................................................303 HB-4930.4F......................................................310 HB-5342AC.4F................................................302
HB-4636A.4F...................................................310 HB-4741A.4F...................................................303 HB-4931............................................................310 HB-5343A.........................................................302
HB-4636AWB .................................................310 HB-4742A.........................................................303 HB-4931.4F......................................................310 HB-5343A.4F...................................................302
HB-4636AWB.4F............................................310 HB-4742A.4F...................................................303 HB-4931RB .............................................309-310 HB-5343AC .....................................................302
HB-4636CV......................................................310 HB-4769............................................................310 HB-4932............................................................310 HB-5343AC.4F................................................302
HB-4644............................................................310 HB-4769.4F......................................................310 HB-4932.4F......................................................310 HB-5344A.........................................................302
HB-4644.4F......................................................310 HB-4770............................................................310 HB-4933............................................................310 HB-5344A.4F...................................................302
HB-4700A.........................................................305 HB-4770.4F......................................................310 HB-4933.4F......................................................310 HB-5344AC .....................................................302
HB-4700A.4F...................................................305 HB-4771............................................................310 HB-4934............................................................310 HB-5344AC.4F................................................302
HB-4700ACB...........................................305,306 HB-4771.4F......................................................310 HB-4934.4F......................................................310 HB-5352A.........................................................302
HB-4700AUSB .......................................305-306 HB-4772............................................................310 HB-4943............................................................307 HB-5352A.4F...................................................302
HB-4700CB......................................................307 HB-4772.4F......................................................310 HB-4943.4F......................................................307 HB-5352AC .....................................................302
HB-4701A.....................................305 HB-4774............................................................309
HB-4774.4F......................................................309
HB-4943P .........................................................307 HB-5352AC.4F................................................302
HB-4701A.4F...................................................305 HB-4943P.4F....................................................307 HB-5355AC .....................................................302
HB-4702A.........................................................305 HB-4775A.........................................................309 HB-4945............................................................307 HB-5355AC.4F................................................302
HB-4702A.4F...................................................305 HB-4775A.4F...................................................309 HB-4945.4F......................................................307 HB-5382AC .....................................................302
HB-4703A.........................................................305 HB-4775C.........................................................309 HB-4945P .........................................................307 HB-5382AC.4F................................................302
HB-4703A.4F...................................................305 HB-4776............................................................309 HB-4945P.4F....................................................307 HB-5392C.........................................................306
HB-4704A.........................................................305 HB-4776.4F......................................................309 HB-4946............................................................307 HB-5392R.........................................................306
HB-4704A.4F...................................................305 HB-4777............................................................309
HB-4777.4F......................................................309
HB-4946.4F......................................................307 HB-5420...........................................302
HB-4705A.........................................................305 HB-4946P .........................................................307 HB-5420.4F......................................................302
HB-4705A.4F...................................................305 HB-4830............................................................309 HB-4946P.4F....................................................307 HB-5420C.........................................................302
HB-4706A.........................................................305 HB-4830.4F......................................................309 HB-4947............................................................307 HB-5420C.4F...................................................302
HB-4706A.4F...................................................305 HB-4831............................................................309 HB-4947.4F......................................................307 HB-5620............................................................302
HB-4710A.........................................................307 HB-4831.4F......................................................309 HB-4947P .........................................................307 HB-5620.4F......................................................302
HB-4710A.4F...................................................307 HB-4832............................................................309 HB-4947P.4F....................................................307 HB-5620C.........................................................302
HB-4710CS......................................................307 HB-4832.4F......................................................309 HB-4950............................................................308 HB-5620C.4F...................................................302
HB-4710CV......................................................307 HB-4833............................................................309 HB-4950.4F......................................................308 HB-5622............................................................302
HB-4711A.........................................................307 HB-4833.4F......................................................309 HB-4951............................................................308 HB-5622.4F......................................................302
HB-4712A.........................................................307 HB-4874............................................................309 HB-4951.4F......................................................308 HB-5622C.........................................................302
HB-4712A.4F...................................................307 HB-4874.4F......................................................309 HB-4952............................................................308 HB-5622C.4F...................................................302
HB-4875............................................................309 HB-4952.4F......................................................308
HB-4713A.........................................................307
HB-4713A.4F...................................................307 HB-4875.4F......................................................309 HB-4953............................................................308 HC-2783.1....................................187
HB-4876............................................................309 HB-4953.4F......................................................308 HC-2817 ...........................................................166
HB-4714A.........................................................307 HC-2819.12 .....................................................166
HB-4714A.4F...................................................307 HB-4876.4F......................................................309 HB-4954............................................................308
HB-4877............................................................309 HB-4954.4F......................................................308 HC-2819.12C ..................................................166
HB-4715A.........................................................307 HC-2820.5F .....................................................215
HB-4715A.4F...................................................307 HB-4877.4F......................................................309 HB-4960............................................................308
HB-4900............................................................304 HB-4960.4F......................................................308 HC-2834S.........................................................207
HB-4716A.........................................................305 HC-2835S.........................................................207
HB-4716A.4F...................................................305 HB-4900.1 ........................................................305 HB-4961............................................................308
HB-4900.4F......................................................304 HB-4961.4F......................................................308 HC-2842 ...........................................................222
HB-4720A.........................................................303 HC-2843 ...........................................................222
HB-4720A.4F...................................................303 HB-4901............................................................304 HB-4962............................................................308
HB-4901.4F......................................................304 HB-4962.4F......................................................308 HC-2843A ........................................................222
HB-4723A.........................................................303 HC-2845 ...........................................................222
HB-4723A.4F...................................................303 HB-4902...........................................304 HB-4963............................................................308
HB-4963.4F......................................................308 HC-2873 ...........................................................187
HB-4724A.........................................................303 HB-4902.1 ........................................................305 HC-2873.2........................................................187
HB-4724A.4F...................................................303 HB-4902.4F......................................................304 HB-4964............................................................308
HB-4964.4F......................................................308 HC-2873.3........................................................187
HB-4725A.........................................................303 HB-4903............................................................304 HC-2873.4........................................................187
HB-4725A.4F...................................................303 HB-4903.4F......................................................304 HB-5100C.........................................................302
HB-5100C.4F...................................................302 HC-2873.5........................................................187
HB-4726A.........................................................303 HB-4904............................................................304 HC-2873.6........................................................187
HB-4726A.4F...................................................303 HB-4904.4F......................................................304 HB-5102C.........................................................302
HB-5102C.4F...................................................302 HC-2873.7........................................................187
HB-4727A.........................................................303 HB-4905............................................................304 HC-2873.8........................................................187
HB-4727A.4F...................................................303 HB-4905.4F......................................................304 HB-5220............................................................302
HB-5220.4F......................................................302 HC-2874 ...........................................................187
HB-4729A.........................................................303 HB-4906............................................................304 HC-2875 ...........................................................187
HB-4729A.4F...................................................303 HB-4906.4F......................................................304 HB-5220C.........................................................302
HB-5220C.4F...................................................302 HC-2937 ...........................................................198
HB-4730............................................................307 HB-4907............................................................304 HC-2938 ...........................................................198
HB-4730.4F......................................................307 HB-4907.4F......................................................304 HB-5292DC .....................................................306
HB-4730CB......................................................307 HB-4908............................................................304 HB-5315A.........................................................302
HB-4730UC .....................................................307 HB-4908.4F......................................................304 HB-5315A.4F...................................................302

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

348
Numerical INDEX
HC-2939 ...........................................................198 HC-2985.9........................................................183 HC-3920 Series .................................................50 HCM-0707.25 .................................................178
HC-2940 ...........................................................198 HC-2986 ...........................................................183 HC-3922 Series .................................................51 HCM-0718 .......................................................178
HC-2941 ...........................................................198 HC-2987 ...........................................................183 HC-3932 Series .................................................51 HCM-0802 .......................................................176
HC-2942A ........................................................198 HC-2988.1........................................................184 HC-4972 ...........................................................151 HCM-1142 .......................................................180
HC-2943 ...........................................................198 HC-2988.2........................................................184 HC-6320 ...........................................................190 HCM-1143 .......................................................180
HC-2944 ...........................................................198 HC-2988.3........................................................184 HC-6330 ...........................................................190 HCM-1144 .......................................................180
HC-2947 ...........................................................198 HC-2988.4........................................................184 HC-6390 ...........................................................189 HCM-1000 Series .........................173, 174, 215
HC-2948 ...........................................................199 HC-2988.5........................................................184 HC-6390.1........................................................189 HCM-2500 Series ..................................172, 174
HC-2950 ...........................................................199 HC-2988.50 .....................................................184 HC-6390.2........................................................189 HCM-3000 Series ..................................172, 174
HC-2955 ...........................................................199 HC-2988.6........................................................184 HC-6390.3........................................................189 HCM-4000 Series ..................................172, 174
HC-2955.1........................................................199 HC-2988.75 .....................................................184 HC-6390.4........................................................189 HCM-4000B Series................................175-176
HC-2955.2........................................................199 HC-2988A ........................................................184 HC-6390.5........................................................189 HCM-4000P Series................................175-176
HC-2955.3........................................................199 HC-2989 ...........................................................184 HC-6390.6........................................................189 HCM-4117.1....................................................171
HC-2955.4........................................................199 HC-2990 ...........................................................201 HC-6440 ...........................................................192 HCM-4177 .......................................................171
HC-2956...........................................199 HC-2993A ........................................................201
HC-2993B.........................................................201
HC-6440.1........................................................192
HC-6440.2........................................................192
HCM-4177.1....................................................171
HC-2957D........................................................184 HCM-4177.4....................................................171
HC-2957RBA.M12.........................................184 HC-2994 ...........................................................201 HC-6440.3........................................................192 HCM-5000 Series ..................................173, 175
HC-2957TRA.XX.............................................184 HC-2994.1........................................................201 HC-6450 ...........................................................191 HCM-5000B Series................................173, 176
HC-2957TSA.XX.............................................184 HC-2994.10 .....................................................201 HC-6450.1........................................................191 HCM-5000P Series................................173, 176
HC-2957U ........................................................184 HC-2994.11 .....................................................201 HC-6450.2........................................................191 HCM-5070 ....................170-171, 174-175, 180
HC-2958 ...........................................................184 HC-2994.2........................................................201 HC-6450.3........................................................191 HCM-5070.4F ..............170-171, 174-175, 180
HC-2959.M100...............................................184 HC-2994.3........................................................201 HC-6450.4........................................................191 HCM-5080 .............................170-171, 174-175
HC-2959.M125...............................................184 HC-2994.4........................................................201 HC-6450.5........................................................191 HCM-5080.4F .......................170-171, 174-175
HC-2959.M875...............................................184 HC-2994.5........................................................201 HC-6450.6........................................................191 HCM-720........................................171, 174-175
HC-2963 ...........................................................161 HC-2994.6........................................................201 HC-6451 ...........................................................191 HCM-HP4014 ................................172-173,180
HC-2964 ...........................................................198 HC-2994.7........................................................201 HC-6460 ..................................................191-192 HCM-TM0100.................................................173
HC-2965 ...........................................................161 HC-2994.8........................................................201 HC-6485 ...........................................................192 HCM-TM0101.................................................173
HC-2966 ...........................................................161 HC-2994.9........................................................201
HC-2995A ........................................................201
HCM-00127..............................178 HCM-TM0102.................................................173
HCM-TM0106.................................................173
HC-2970.2F .....................................................165 HCM-0015 .......................................................178
HC-2970.5F .....................................................165 HC-3000 ...........................................................200 HCM-0022A ....................................................177 HD-4129.01A ....................................................17
HC-2971 ...........................................................165 HC-3000.1........................................................200 HCM-0022SA..................................................177 HD-4129.05A ....................................................17
HC-2972 ...........................................................165 HC-3001 ...........................................................200 HCM-0023 ..............................................177-178 HD-4129.3F .................................................16-17
HC-2975 ...........................................................185 HC-3001.10 .....................................................200 HCM-0023L............................................177-178 HD-4129.5..........................................................15
HC-2976 ...........................................................185 HC-3001.11 .....................................................200 HCM-0023N...........................................177-178 HD-4130.3F .................................................16-17
HC-2978 ...........................................................183 HC-3001.2........................................................200 HCM-0030 Series ..................................173, 174 HD-4139.3F .......................................................15
HC-2978.1........................................................183 HC-3001.2C.....................................................200 HCM-005050 ..................................................171 HD-4149.3F .................................................16-17
HC-2978.2........................................................183 HC-3001.3........................................................200 HCM-0101 .......................................................177 HD-4159.3F .................................................16-17
HC-2979.2F.3...................................................165 HC-3001.4........................................................200
HC-3001.5........................................................200
HCM-0104 .......................................................177 HG-9011.3F...............................194
HC-2979.5F.3...................................................165 HCM-0106 .......................................................177 HG-9012...........................................................194
HC-2980.1........................................................165 HC-3001.6........................................................200 HCM-0106.3....................................................177 HG-9013...........................................................194
HC-2980.2........................................................165 HC-3001.7........................................................200 HCM-0107P.....................................................177 HG-9014...........................................................194
HC-2980.2F .....................................................165 HC-3001.8........................................................200 HCM-0111 .......................................................177 HG-9015...........................................................194
HC-2980.3........................................................165 HC-3001.9........................................................200 HCM-0111X ....................................................177 HG-9016...........................................................194
HC-2980.4........................................................165 HC-3057.02 .....................................................212 HCM-0112A ....................................................177 HG-9017...........................................................194
HC-2980.5........................................................165 HC-3057.03 .....................................................212 HCM-0112SA..................................................177 HG-9018...........................................................194
HC-2980.5F .....................................................165 HC-3057.07 .....................................................212 HCM-0113 .......................................................177 HG-9020.3F.....................................................188
HC-2980.6........................................................165 HC-3057.08 .....................................................212 HCM-0113X ....................................................177 HG-9021...........................................................188
HC-2981A ........................................................186 HC-3057.10 .....................................................212 HCM-0114A ....................................................177 HG-9022...........................................................188
HC-2982A ........................................................186 HC-3057.13 .....................................................212 HCM-0115A ....................................................177 HG-9023...........................................................188
HC-2983A ........................................................186 HC-3057.14 .....................................................212 HCM-0116 .......................................................177 HG-9027...........................................................188
HC-2984A ........................................................186 H-3057.3F.........................................................212 HCM-0116X ....................................................177 HG-9028...........................................................188
HC-2985 ...........................................................183 HC-3058.3F .....................................................212 HCM-0117A ....................................................177 HG-9030.3F.....................................................194
HC-2985.1........................................................183 HC-3059.3F .....................................................212 HCM-0119A ....................................................177 HG-9031...........................................................194
HC-2985.10 .....................................................183 HC-3177 ...........................................................196 HCM-0120 .......................................................178 HG-9032...........................................................194
HC-2985.11 .....................................................183 HC-3186S.4F...................................................195 HCM-0123 .......................................................178 HG-9033...........................................................194
HC-2985.12 .....................................................183 HC-3253.1........................................................215 HCM-0124 .......................................................178 HG-9034...........................................................194
HC-2985.13 .....................................................183 HC-3253.5F .....................................................215 HCM-0135 .......................................................178 HG-9035.3F.....................................................194
HC-2985.2........................................................183 HC-3254.5F .....................................................215 HCM-0190P.....................................................176 HG-9036...........................................................188
HC-2985.3........................................................183 HC-3553.2........................................................215 HCM-0190SP ..................................................176 HG-9036.4F.....................................................188
HC-2985.4........................................................183 HC-3665 ...........................................................154 HCM-0612 .......................................................178 HG-9037.3F.....................................................194
HC-2985.5........................................................183 HC-3666 ...........................................................154 HCM-0615 .......................................................178 HG-9038...........................................................194
HC-2985.6........................................................183 HC-3668 ...........................................................154 HCM-0653 .......................................................178 HG-9039...........................................................188
HC-2985.7........................................................183 HC-3851 ...........................................................205 HCM-0654 .......................................................178 HG-9042...........................................................188
HC-2985.8........................................................183 HC-3851.2F ..............................................75, 205 HCM-0661 .......................................................178 HG-9042.4F.....................................................188
HC-3910 Series .................................................50 HCM-0662 .......................................................178 HG-9044.3F.....................................................188
HC-3912 Series .................................................51 HCM-0666 .......................................................178 HG-9047...........................................................188

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 349
INDEX Numerical
HM-1210.25.12...............................................109 HM-1230.100 ..................................................108 HM-2701.24D .................................................115
HI-3910 Series........................48 HM-1210.25.2 .................................................109 HM-1230.100.9...............................................109 HM-2701.24S ..................................................115
HI-3912 Series....................................................49
HM-1210.30.....................................................108 HM-1230.20.....................................................108 HM-2701.25D .................................................115
HI-3920 Series....................................................48
HM-1210.30.12...............................................109 HM-1230.20.9 .................................................109 HM-2701.25S ..................................................115
HI-3922 Series....................................................49
HM-1210.40.....................................................108 HM-1230.24.9 .................................................109 HM-2701.40D .................................................115
HI-3932 Series....................................................49
HM-1210.40.12...............................................109 HM-1230.242 ..................................................108 HM-2701.40S ..................................................115
HM-000058......................................................136
HM-1210.40.2 .................................................109 HM-1230.25.....................................................108 HM-2701.50D .................................................115
HM-000059......................................................136
HM-1210.50.....................................................108 HM-1230.25.1 .................................................109 HM-2701.50S ..................................................115
HM-000060......................................................136
HM-1210.50.12...............................................109 HM-1230.25.9 .................................................109 HM-2701.60D .................................................115
HM-000061......................................................136
HM-1210.70.....................................................108 HM-1230.30.....................................................108 HM-2701.60S ..................................................115
HM-000062......................................................136
HM-1210.70.12...............................................109 HM-1230.30.9 .................................................109 HM-2702.XX....................................................113
HM-000063......................................................136
HM-1210.75.....................................................108 HM-1230.40.....................................................108 HM-2702.XXS/D.............................................115
HM-000064......................................................136
HM-1210.75.12...............................................109 HM-1230.40.1 .................................................109 HM-2703.1.......................................................115
HM-000379......................................................141
HM-1220.100.4...............................................109 HM-1230.40.9 .................................................109 HM-2703.XX....................................................113
HM-001076.............................................103, 115
HM-1220.100.8...............................................109 HM-1230.50.....................................................108 HM-2703.XXS/D.............................................115
HM-003024......................................................109
HM-1220.100.9...............................................109 HM-1230.50.9 .................................................109 HM-2704.XXS/D.............................................115
HM-003027......................................................109
HM-1220.20.....................................................108 HM-1230.70.....................................................108 HM-2751.100D...............................................115
HM-003052......................................................109
HM-1220.20.10...............................................109 HM-1230.70.9 .................................................109 HM-2751.100S................................................115
HM-003053......................................................109
HM-1220.20.4 .................................................109 HM-1230.75.....................................................108 HM-2751.20D .................................................115
HM-003054......................................................109
HM-1220.20.8 .................................................109 HM-1230.75.9 .................................................109 HM-2751.20S ..................................................115
HM-003055......................................................109
HM-1220.20.9 .................................................109 HM-1972-1D .....................................................94 HM-2751.24D .................................................115
HM-003056......................................................109
HM-1220.24.10...............................................109 HM-1972-1E......................................................94 HM-2751.24S ..................................................115
HM-003057......................................................109
HM-1220.24.4 .................................................109 HM-1972-3D .....................................................94 HM-2751.25D .................................................115
HM-003058......................................................109
HM-1220.24.8 ..........................................94, 109 HM-1972-3E......................................................94 HM-2751.25S ..................................................115
HM-003059......................................................109
HM-1220.24.9 .................................................109 HM-1972-6D .....................................................94 HM-2751.40D .................................................115
HM-003060......................................................109
HM-1220.242 ..................................................108 HM-1972-6E......................................................94 HM-2751.40S ..................................................115
HM-003061......................................................109
HM-003062......................................................109
HM-1220.25.....................................................108 HM-2002.........................................122 HM-2751.50D .................................................115
HM-1220.25.1 .................................................109 HM-200387......................................................122 HM-2751.50S ..................................................115
HM-003063......................................................109
HM-1220.25.10...............................................109 HM-2003E...............................................122, 140 HM-2751.60D .................................................115
HM-003175......................................................136
HM-1220.25.11...............................................109 HM-2300.005 ..................................................140 HM-2751.60S ..................................................115
HM-003176......................................................136
HM-1220.25.2 .................................................109 HM-2300.010 ..................................................140 HM-2751.XX....................................................113
HM-003193......................................................136
HM-1220.25.3 .................................................109 HM-2300.010S................................................140 HM-2755.XXS .................................................115
HM-003274......................................................115
HM-1220.25.4 .................................................109 HM-2300.020 ..................................................140 HM-2850.3F...............................82-83, 122, 234
HM-003275......................................................115
HM-1220.25.5 .................................................109 HM-2300.020P................................................140 HM-3000.10.1 .................................................122
HM-003275A ..................................................115
HM-1220.25.6 .................................................109 HM-2300.020S................................................140 HM-3000.10.2 .................................................122
HM-003276......................................................115
HM-1220.25.8 ..........................................94, 109 HM-2300.050 ..................................................140 HM-3130 ..........................................................137
HM-003349........................................................89
HM-1220.25.9 .................................................109 HM-2300.050P................................................140 HM-3130.10.....................................................137
HM-1100.1.......................................................106
HM-1220.30.....................................................108 HM-2300.050S................................................140 HM-3130.100 ..................................................137
HM-1100.3.......................................................106
HM-1220.30.10...............................................109 HM-2300.100 ..................................82, 140, 235 HM-3130.14.....................................................137
HM-1100A ..............................................106-107
HM-1220.30.4 .................................................109 HM-2300.100P................................................140 HM-3130.18.....................................................137
HM-1120 ......................106-107, 109, 113, 115
HM-1220.30.8 .................................................109 HM-2300.150P................................................140 HM-3130.20.....................................................137
HM-1120.1..............................................109, 115
HM-1220.30.9 .................................................109 HM-2300.20.....................................................103 HM-3130.25.....................................................137
HM-1120.125 .........................................109, 115
HM-1220.40.....................................................108 HM-2300.250P................................................140 HM-3130.28.....................................................137
HM-1120.2..............................................109, 115
HM-1220.40.1 .................................................109 HM-2300.500P................................................140 HM-3130.30.....................................................137
HM-1120.250 .........................................109, 115
HM-1220.40.10...............................................109 HM-2305.10.....................................82, 141, 235 HM-3130.35.....................................................137
HM-1120.4..............................................109, 115
HM-1220.40.2 .................................................109 HM-2305.20.....................................................141 HM-3130.38.....................................................137
HM-1120.500 .........................................109, 115
HM-1220.40.4 .................................................109 HM-2305BRT ...........................................82, 141 HM-3130.40.....................................................137
HM-1121 ................................109, 115 HM-1220.40.8 .................................................109 HM-2310.04..........................104-107, 141, 179 HM-3130.50.....................................................137
HM-1122 .................................................109, 115 HM-1220.40.9 .................................................109 HM-3130.70.....................................................137
HM-2310.10..........................103, 135, 141, 233
HM-1122.05............................................109, 115 HM-1220.50.....................................................108 HM-3140 ..........................................................137
HM-2310.20.....................................................141
HM-1122.1..............................................109, 115 HM-1220.50.10...............................................109 HM-3175 ..........................................................137
HM-2310BR..........................103-107, 135, 141
HM-1122.10............................................109, 115 HM-1220.50.4 .................................................109 HM-3175.1.......................................................137
HM-2310C .......................................................141
HM-1122.2..............................................109, 115
HM-1122.4..............................................109, 115
HM-1220.50.8 .................................................109 HM-2315 ..........................................................134 HM-3701 ...........................................90
HM-1220.50.9 .................................................109 HM-2350 .................................................122, 141 HM-3818.100 ..................................................137
HM-1122.5..............................................109, 115 HM-1220.70.....................................................108 HM-2350.4F............................................122, 141 HM-3818.14.....................................................137
HM-1122.8..............................................109, 115 HM-1220.70.10...............................................109 HM-2360 ..........................................................141 HM-3818.15.....................................................137
HM-1123 ...............................106-107, 109, 115 HM-1220.70.4 .................................................109 HM-2360.4F.....................................................141 HM-3818.150 ..................................................137
HM-1124 .................................................109, 115 HM-1220.70.8 .................................................109 HM-2415 ............................................................94 HM-3818.18.....................................................137
HM-1125 ........................................109, 113, 115 HM-1220.70.9 .................................................109 HM-2432A.3F ........................................104-105 HM-3818.20.....................................................137
HM-1210.100 ..................................................108 HM-1220.75.....................................................108 HM-2432AM.3F ....................................104-105 HM-3818.23.....................................................137
HM-1210.100.12 ............................................109 HM-1220.75.10...............................................109 HM-2505BRSO...............................................141 HM-3818.25.....................................................137
HM-1210.20.....................................................108 HM-1220.75.4 .................................................109 HM-2505BRSQ...............................................233 HM-3818.28.....................................................137
HM-1210.20.12...............................................109 HM-1220.75.8 .................................................109 HM-2701.100D...............................................115 HM-3818.35.....................................................137
HM-1210.24.12...............................................109 HM-1220.75.9 .................................................109 HM-2701.100S................................................115 HM-3818.38.....................................................137
HM-1210.242 ..................................................108 HM-1220.XX...........................................104-106 HM-2701.20D .................................................115
HM-1210.25.....................................................108 HM-1220.XX.4 ................................................115 HM-2701.20S ..................................................115

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

350
Numerical INDEX
HM-3818.40.....................................................137 HM-4174 ..........................................................137 HM-4184.40.....................................................138 HM-4199.28.....................................................123
HM-3818.50.....................................................137 HM-4174M ......................................................137 HM-4184.4375T .............................................109 HM-4199.28B..................................................123
HM-3818.60.....................................................137 HM-4175 ..........................................................141 HM-4184.50.....................................................138 HM-4199.28SS................................................123
HM-3818.70.....................................................137 HM-4175.4F.....................................................141 HM-4184.60.....................................................138 HM-4199.28SSB.............................................123
HM-3827.100 ..................................................138 HM-4177 ..........................................................179 HM-4184.70.....................................................138 HM-4199.28SST .............................................123
HM-3827.14.....................................................138 HM-4178BRT .........................................141, 233 HM-4185.14.....................................................138 HM-4199.28T..................................................123
HM-3827.15.....................................................138 HM-4179.100 ..................................................138 HM-4185.15.....................................................138 HM-4199.35.....................................................123
HM-3827.20.....................................................138 HM-4179.14.....................................................138 HM-4185.20.....................................................138 HM-4199.35B..................................................123
HM-3827.28.....................................................138 HM-4179.15.....................................................138 HM-4185.28.....................................................138 HM-4199.35SS................................................123
HM-3827.35.....................................................138 HM-4179.150 ..................................................138 HM-4185.40.....................................................138 HM-4199.35SSB.............................................123
HM-3827.38.....................................................138 HM-4179.20.....................................................138 HM-4185.60.....................................................138 HM-4199.35SST .............................................123
HM-3827.40.....................................................138 HM-4179.28.....................................................138 HM-4186.14.....................................................138 HM-4199.35T..................................................123
HM-3827.50.....................................................138 HM-4179.35.....................................................138 HM-4186.15.....................................................138 HM-4199.38.....................................................123
HM-3827.60.....................................................138 HM-4179.38.....................................................138 HM-4186.20.....................................................138 HM-4199.38B..................................................123
HM-3827.70.....................................................138 HM-4179.40.....................................................138 HM-4186.28.....................................................138 HM-4199.38SS................................................123
HM-3847.14.....................................................138 HM-4179.50.....................................................138 HM-4186.40.....................................................138 HM-4199.38SSB.............................................123
HM-3847.15.....................................................138 HM-4179.60.....................................................138 HM-4187A.3F ........................................122, 135 HM-4199.38SST .............................................123
HM-3847.150 ..................................................138
HM-3847.20.....................................................138
HM-4179.70.....................................................138
HM-4180.14.....................................................138
HM-4187H...................................135 HM-4199.38T..................................................123
HM-4199.40.....................................................123
HM-4188 Series ................................................91
HM-3847.28.....................................................138 HM-4180.14T..................................................138 HM-4189.15.....................................................138 HM-4199.40B..................................................123
HM-3847.35.....................................................138 HM-4180.15.....................................................138 HM-4189.20............................................109, 138 HM-4199.40SS................................................123
HM-3847.38.....................................................138 HM-4180.15T..................................................138 HM-4189.25.....................................................109 HM-4199.40SSB.............................................123
HM-3847.40.....................................................138 HM-4180.20.....................................................138 HM-4189.28.....................................................138 HM-4199.40SST .............................................123
HM-3847.50.....................................................138 HM-4180.20T..................................................138 HM-4189.30.....................................................109 HM-4199.40T..................................................123
HM-3847.60.....................................................138 HM-4180.28.....................................................138 HM-4189.40............................................109, 138 HM-4199.50.....................................................123
HM-3847.70.....................................................138 HM-4180.28T..................................................138 HM-4189.60.....................................................138 HM-4199.50B..................................................123
HM-3913 ............................................................89 HM-4180.40.....................................................138 HM-4189FS......................................................137 HM-4199.50SS................................................123
HM-3914...........................................89 HM-4180.40T..................................................138
HM-4180.60.....................................................138
HM-4190 ............................................................93 HM-4199.50SSB.............................................123
HM-4199.50SST .............................................123
HM-3915 ............................................................89 HM-4193BR.....................................................141
HM-3930 ............................................................87 HM-4180.60T..................................................138 HM-4196.12.....................................................136 HM-4199.50T..................................................123
HM-4100A .........................................................67 HM-4181.14.....................................................138 HM-4196.25.....................................................136 HM-4199.60.....................................................123
HM-4100A.1......................................................67 HM-4181.15.....................................................138 HM-4196.CXO................................................136 HM-4199.60B..................................................123
HM-4100A.2......................................................67 HM-4181.20.....................................................138 HM-4197.12.....................................................136 HM-4199.60SS................................................123
HM-4100A.5F ...................................................67 HM-4181.28.....................................................138 HM-4197.25.....................................................136 HM-4199.60SSB.............................................123
HM-4140.3F...............................92-93, 122, 125 HM-4181.40.....................................................138 HM-4198 ..........................................................137 HM-4199.60SST .............................................123
HM-4140M.3F ..........................92-93, 122, 125 HM-4181.60.....................................................138 HM-4199 Series ................................................91 HM-4199.60T..................................................123
HM-4150.006 ..................................................136 HM-4182.14.....................................................138 HM-4199.100 ..................................................123 HM-4199.70.....................................................123
HM-4150.22AS...............................................136 HM-4182.15.....................................................138 HM-4199.100B ...............................................123 HM-4199.70B..................................................123
HM-4150.23AS...............................................136 HM-4182.20.....................................................138 HM-4199.100SS .............................................123 HM-4199.70SS................................................123
HM-4150.3F......................92-93, 122, 125, 133 HM-4182.28.....................................................138 HM-4199.100SSB...........................................123 HM-4199.70SSB.............................................123
HM-4150.44.....................................................136 HM-4182.40.....................................................138 HM-4199.100SST...........................................123 HM-4199.70SST .............................................123
HM-4150.45.....................................................136 HM-4182.60.....................................................138 HM-4199.100T................................................123 HM-4199.70T..................................................123
HM-4150.72.....................................................136 HM-4183.14.....................................................138 HM-4199.14.....................................................123 HM-4199.XX...........................................122, 132
HM-4150.77.....................................................136 HM-4183.15.....................................................138 HM-4199.14B..................................................123 HM-4199B......................................122, 123, 132
HM-4150.78.....................................................136 HM-4183.20.....................................................138 HM-4199.14SS................................................123 HM-4199B-4..................................122, 123, 132
HM-4150A ..........................................92-93, 125 HM-4183.28.....................................................138 HM-4199.14SSB.............................................123 HM-4199B-6....................................................123
HM-4150M.3F ..........................92-93, 122, 125 HM-4183.40.....................................................138 HM-4199.14SST .............................................123 HM-4199SS......................................................123
HM-4151.1.......................................................135 HM-4183.60.....................................................138 HM-4199.14T..................................................123 HM-4199SS-4..................................................123
HM-4151A .......................................................135 HM-4184.100 ...........................................90, 138 HM-4199.15.....................................................123 HM-4199SS-6..................................................123
HM-4154 ..........................................................124 HM-4184.14.....................................................138 HM-4199.150 ..................................................123 HM-4220 ..........................................................136
HM-4155 ..........................................................124 HM-4184.15.....................................................138 HM-4199.150B ...............................................123 HM-4220.4F.....................................................136
HM-4160.3F........................................92-93, 125 HM-4184.150 ..................................................138
HM-4184.1955................................................109
HM-4199.150SS .............................................123 HM-4221 .........................................135
HM-4160A .................................92-93, 125, 133 HM-4199.150SSB...........................................123 HM-4222 ..........................................................135
HM-4160M.3F ...................................92-93, 125 HM-4184.1985................................................109 HM-4199.150SST...........................................123 HM-4223 ..........................................................135
HM-4164.3F.....................................................124 HM-4184.20.....................................................138 HM-4199.150T................................................123 HM-4469AC ....................................................141
HM-4164M.3F ................................................124 HM-4184.240 ...........................................94, 109 HM-4199.15B..................................................123 HM-4469C .......................................................141
HM-4165.3F.....................................................124 HM-4184.2485.........................................94, 109 HM-4199.15SS................................................123 HM-4470.02............................................142, 334
HM-4165M.3F ................................................124 HM-4184.274 ..................................................109 HM-4199.15SSB.............................................123 HM-4470.025 ..................................................334
HM-4167 ..........................................................136 HM-4184.28.....................................................138 HM-4199.15SST .............................................123 HM-4470.05............................................142, 334
HM-4168 ...............................103, 111, 115, 136 HM-4184.2940................................................109 HM-4199.15T..................................................123 HM-4470.10..........................104-107, 142, 334
HM-4170 ........................................122, 135, 141 HM-4184.2985................................................109 HM-4199.20.....................................................123 HM-4470.20............................................142, 334
HM-4170B........................................................141 HM-4184.331 ...........................................94, 109 HM-4199.20B..................................................123 HM-4470.40............................................142, 334
HM-4172 ..........................................................141 HM-4184.35.....................................................138 HM-4199.20SS................................................123 HM-4470C ...................104-105, 139, 141, 334
HM-4173 ..........................................................137 HM-4184.38.....................................................138 HM-4199.20SSB.............................................123 HM-4470U ..........................................98-99, 141
HM-4184.3925................................................109 HM-4199.20SST .............................................123 HM-4501 ............................................................84
HM-4184.399T..................................................94 HM-4199.20T..................................................123 HM-4502 ............................................................33

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 351
INDEX Numerical
HM-5001SW.....................................81, 100-101 HN-3953.............................................................54 HR-2800............................................................280 HT-4142.............................................................288
HM-5002SW...........................................100-101 HN-3954.............................................................54 HR-2800.4F......................................................280 HT-4143.............................................................288
HM-5003SW...........................................100-101 HN-3955.............................................................54 HR-2850............................................................280 HT-4149.............................................................294
HM-5004SW...........................................100-101 HO-4930..........................................299 HR-2850.4F......................................................280 HT-4149U..........................................................294
HM-5005SW..................................100-101, 233
HM-5006SW...........................................100-101
HO-4940...........................................................299 HS-000176.....................................10 HT-4325.............................................................288
HO-4941...........................................................299 HS-001057 .........................................................10 HT-4353.............................................................294
HM-5020.3F...........................118-119, 128-133 HO-4943...........................................................299 HS-001067 .........................................................10 HT-4353U..........................................................294
HM-5020U .........................................................99 HO-4960...........................................................299 HS-130508 .........................................................11 HT-4793.............................................................288
HM-5030.3F...........81, 118-119, 128-133, 232 HO-4962...........................................................299 HS-130508C......................................................11 HT-4794.............................................................288
HM-5030U .........................................................99 HO-4963...........................................................299 HS-130512 .........................................................11 HT-4794.1 .........................................................292
HM-5040.3F............................................118-119 HO-4964...........................................................299 HS-130512C......................................................11 HT-4794.2 .........................................................292
HM-5100SW..........................100-101, 103-107 HO-4965...........................................................299 HS-2000185.......................................................10 HT-4794.3 .........................................................292
HM-5120.3F.....................................................232 HT-4795.............................................................288
HM-5170.3F..............................................82, 233 HP-1108..............................................71 HS-200112 .........................................................10
HS-200127 .........................................................10 HT-4795.1 .........................................................288
HM-5240.3F.....................................................134 HP-1160..............................................................71 HT-4795.2 .........................................................288
HR-2500............................................................280 HS-200130 .........................................................10
HM-5240U .........................................................99 HS-200145 .........................................................10 HT-4795C .........................................................288
HM-5250.3F.....................................................134 HR-2500.4F......................................................280 HT-4796.............................................................288
HR-2503E .........................................................281 HS-200153 .........................................................10
HM-5320.3F...................................104-107, 139 HS-200177 .........................................................10 HT-4796-2.........................................................288
HM-5320U .........................................................99 HR-2504............................................................281 HT-4796-2C......................................................288
HR-2508............................................................280 HS-200185 .........................................................10
HM-5330.3F...................................104-107, 139 HS-200313 .........................................................10 HT-4796C .........................................................288
HM-5330U .........................................................99 HR-2510............................................................282 HT-4797.............................................................288
HR-2511............................................................282 HS-200800 .........................................................11
HM-5405 ............................................................94 HS-200801 .........................................................11 HT-4797C .........................................................288
HM-5470.3F............................................102-103 HR-2512............................................................282 HT-4798.............................................................288
HR-2513............................................................282 HS-200802 .........................................................11
HM-5470U .........................................................99 HS-200803 .........................................................11 HT-4798.1 .........................................................292
HM-5560U .........................................................99 HR-2514............................................................282 HT-4798.2 .........................................................292
HS-200820 .........................................................11
HM-5700SW..................................100-101, 113 HR-2515............................................282 HS-4156.14 ......................................................142 HT-4798.3 .........................................................292
HM-5750.3F.....................................................114 HR-2516............................................................282 HS-4157..............................................................70 HT-4798C .........................................................288
HM-5750A.3F ........................................111, 113 HR-2530.1 ........................................................282 HS-4158..............................................................70 HT-5011.............................................................298
HM-5750AU ......................................................99 HR-2530.10......................................................282 HS-4159..............................................................71 HT-8613.............................................................292
HM-5750D.3F ........................................111, 113 HR-2530.11......................................................282 HS-4160..............................................................71 PRX2 ..................................................................257
HM-5750DU......................................................99 HR-2530.1125 .................................................282 HS-4161..............................................................71
HM-5750M.3F ................................................114 HR-2530.12......................................................282 HS-4162..............................................................71
HM-5755.3F.....................................................113 HR-2530.125....................................................282 HS-4159.1...........................................................71
HM-5760.3F.....................................................113 HR-2530.13......................................................282 HS-4160.1...........................................................71
HM-5780.3F.....................................................116 HR-2530.14......................................................282 HS-4161.1...........................................................71
HM-5801 ............................................................89 HR-2530.15......................................................282 HS-4162.1...........................................................71
HM-5801.7.........................................................89 HR-2530.175....................................................282 HS-4210..............................................................26
HM-5801.8.........................................................89 HR-2530.1875 .................................................282 HS-4210.2...........................................................26
HM-5801.9.........................................................89 HR-2530.2 ........................................................282 HS-4210.3...........................................................26
HM-5802 ............................................................89 HR-2530.225....................................................282 HS-4210.3.1 .......................................................26
HM-5803...........................................89 HR-2530.25......................................................282
HR-2530.275....................................................282
HS-5001EZ........................................................8-9
HM-5804 ............................................................89 HS-5001EZ081.................................................6-9
HM-5805 ............................................................89 HR-2530.3 ........................................................282 HS-5001EZ082.................................................6-9
HM-5860 ............................................................90 HR-2530.35......................................................282 HS-5001EZ121.................................................6-9
HM-5861 ............................................................90 HR-2530.4 ........................................................282 HS-5001EZ122.................................................6-9
HM-5880 ............................................................90 HR-2530.425....................................................282 HS-5001SD ......................................................7, 9
HM-5890 ............................................................90 HR-2530.45......................................................282 HS-5001SD081................................................6-9
HM-5891A .........................................................89 HR-2530.5 ........................................................282 HS-5001SD082................................................6-9
HM-5892 ............................................................89 HR-2530.55......................................................282 HS-5001SD121................................................6-9
HM-5893 ............................................................89 HR-2530.6 ........................................................282 HS-5001SD122................................................6-9
HM-5894 ............................................................89 HR-2530.625....................................................282 HSM-2100..........................................................33
HR-2530.7 ........................................................282
HM-5895 ............................................................89
HM-5896 ............................................................90 HR-2530.8 ........................................................282 HT-4015.............................................288
HR-2530.9 ........................................................282 HT-4028.............................................................292
HM-5940 ..........................................................143 HT-4039.............................................................294
HM-9110 ..........................................................285 HR-2554............................................................282
HR-2556............................................................282 HT-4039U..........................................................294
HM-9110.1.......................................................285 HT-4049.............................................................294
HM-9110.2.......................................................285 HR-2570.1 ........................................................282
HR-2570.5 ........................................................282 HT-4049U..........................................................294
HM-9111 ..........................................................285 HT-4050.............................................................294
HM-9111.1.......................................................285 HR-2570.625....................................................282
HR-2570.75......................................................282 HT-4050U..........................................................294
HM-9111.2.......................................................285 HT-4052.............................................................294
HM-9113 ..........................................................285 HR-2570.875....................................................282
HR-2599............................................................282 HT-4052U..........................................................294
HM-9113.1.......................................................285 HT-4105.............................................................288
HN-3950.............................................................54 HR-2600............................................................281
HR-2601............................................................281 HT-4132.............................................................288
HN-3951.............................................................54 HT-4132.2 .........................................................292
HN-3952.............................................................54 HR-2700............................................................281
HR-2701............................................................281 HT-4136.............................................................288

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

352
Alphabetical INDEX
Able Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178 Balance-Portable, Adam Core . . . . . . . . . . . . . . . . . . . . . . .308 CBR Setup, HM-5150/HM-5170 . . . . . . . . . . . . . . . . . . . . . .82
Abrasion Machine, Los Angeles. . . . . . . . . . . . . . . . . . . . . . .67 Balance-Portable, Ohaus Navigator XL . . . . . . . . . . . . . . .308 CBR, Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Abrasion, Falling Sand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Balance-Portable, Ohaus Navigator XT . . . . . . . . . . . . . . .308 CBR, Load Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81-83
Accessories, Dual-Mass DCP . . . . . . . . . . . . . . . . . . . . . . 22-23 Balance, Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .311 cDAC Controller and Data Acquisition . . . . . . . . . . . . . . . .244
Accessories, Lightweight Deflectometer . . . . . . . . . . . . . . .17 Balance, Mechanical Accessories . . . . . . . . . . . . . . . . . . . .312 Cells, Consolidation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Acidity and Moisture Tester. . . . . . . . . . . . . . . . . . . . . . . . . . .35 Balances & Scales. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300-312 Cells, Permeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Acme Penetrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 Balances-High-Capacity, Adam Eclipse . . . . . . . . . . . . . . .307 Cement Autoclave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221
Acme Penetrometer Resistance Needles. . . . . . . . . . . . . .151 Balances-High-Capacity, Adam Nimbus . . . . . . . . . . . . . .306 Cement Bleeding Apparatus . . . . . . . . . . . . . . . . . . . . . . . .210
Acrylic Disk, Triaxial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Balances-High-Capacity, Ohaus Explorer. . . . . . . . . . . . . .306 Cement Briquette Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . .217
Aggrameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Balances-High-Capacity, Ohaus Ranger. . . . . . . . . . . . . . .306 Cement Calorimeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208
Aggregate Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Balances-Precision, Adam Eclipse . . . . . . . . . . . . . . . . . . . .304 Cement Compression/Flexural Machine . . . . . . . . . . . . . .215
Aggregate Impact Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Balances-Precision, Adam Nimbus . . . . . . . . . . . . . . . . . . .305 Cement Cube Molds. . . . . . . . . . . . . . . . . . . . . . . . . . .216-217
Aggregate Washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Balances-Precision, Ohaus Adventurer . . . . . . . . . . . . . . . .302 Cement Prism Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218
Air Compressor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 Balances, Ohaus Scout SPX . . . . . . . . . . . . . . . . . . . . . . . . .303 Cement Test Bar Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
Air Drying Unit, Rice Test . . . . . . . . . . . . . . . . . . . . . . . . . . . .239 Balances, Ohaus Scout STX . . . . . . . . . . . . . . . . . . . . . . . . .303 Cement Vibrating Table . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
Air Entrainment Meter, Mortar . . . . . . . . . . . . . . . . . . . . . . .206 Ball Drop Apparatus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 Cement Wet Washing Sieves. . . . . . . . . . . . . . . . . . . . . . . . .57
Air Indicator, Chace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147 Ball Penetration Apparatus . . . . . . . . . . . . . . . . . . . . . . . . . .152 Cement, Flow Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
Air Indicator, Roll-A-Meter . . . . . . . . . . . . . . . . . . . . . . . . . .150 Balloons, Voluvessel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Cement, Mixing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204-205
Air Jet Sieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Beaker, 6-liter Stainless Steel. . . . . . . . . . . . . . . . . . . . . . . . .207 Cement, Test Sand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205
Air Jet Sieving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Beakers, Graduated. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .322 Cementometer Moisture Meter . . . . . . . . . . . . . . . . . . . . .151
Air Meter Calibrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148 Beakers, Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .326 Centrifuge Extractor. . . . . . . . . . . . . . . . . . . . . . . . . . . .275-276
Air Meter, Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . .146-147 Beam Bending, Asphalt . . . . . . . . . . . . . . . . . . . . . . . .248-249 Centrifuge Extractor, Filterless . . . . . . . . . . . . . . . . . . . . . . .276
Air Meter, Replacement Parts . . . . . . . . . . . . . . . . . . . .148-149 Beam Testing, Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 Centrifuge Extractor, Filters . . . . . . . . . . . . . . . . . . . . . . . . . .276
Air Meter, Super . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146 Bearing Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Chace, Air Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
Air Meter, Volumetair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 Bench, Specific Gravity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Chapman Specific Gravity Flask. . . . . . . . . . . . . . . . . . . . . . .64
Air-Jet Sieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Bending Beam Rheometer. . . . . . . . . . . . . . . . . . . . . .254-255 Chart Recorder, Circular. . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Anchor Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 Bending Head, Semi-Circular. . . . . . . . . . . . . . . . . . . . . . . .235 Chisels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330
Asphalt Content/Binder Furnace. . . . . . . . . . . . . . . . . . . . .257 Benkelman Beam. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283 Chlorimeter Chloride Test System . . . . . . . . . . . . . . . . . . . .189
Asphalt Dispensers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277 Bitumen Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253-257 Circulating Temperature Controller . . . . . . . . . . . . . . . . . . .260
Asphalt Heavy-Duty Whisks . . . . . . . . . . . . . . . . . . . . .240-241 Bitumen Testing Lab Ovens . . . . . . . . . . . . . . . . . . . . . . . . .256 Classification, Aggregate . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Asphalt Institute Viscometer . . . . . . . . . . . . . . . . . . . . . . . . .265 Bituminous Materials, Solubility . . . . . . . . . . . . . . . . . . . . . .273 Cleveland Flash Point Testers . . . . . . . . . . . . . . . . . . . . . . . .271
Asphalt Permeameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285 Bladder, Air-Water Cylinder. . . . . . . . . . . . . . . . . . . . . . . . . .135 Cloud and Pour Point Apparatus Set . . . . . . . . . . . . . . . . .268
Asphalt Sample Splitter, QuarterMaster . . . . . . . . . . . . . . .241 Blaine Air Permeability Apparatus . . . . . . . . . . . . . . . .210-211 Compaction Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Asphalt Viscosimeter Float Test Set . . . . . . . . . . . . . . . . . . .268 Blaine Air, Dykerhoff . . . . . . . . . . . . . . . . . . . . . . . . . . . .210-211 Compaction Hammer Tamper. . . . . . . . . . . . . . . . . . . . . . . .80
Asphalt, Beam Bending . . . . . . . . . . . . . . . . . . . . . . . .248-249 Bleeding Apparatus, Cement . . . . . . . . . . . . . . . . . . . . . . .209 Compaction Hammer, AASHTO. . . . . . . . . . . . . . . . . . . . . .79
Asphalt, Marshall Compactor. . . . . . . . . . . . . . . . . . . .226-230 BluePeg Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 Compaction Hammer, COE. . . . . . . . . . . . . . . . . . . . . . . . . .79
Asphalt, Mixers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240-241 Bond Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 Compaction Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Asphaltic Materials Spot Test . . . . . . . . . . . . . . . . . . . . . . . .268 Box Furnaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320 Compaction Mold, Two-Part . . . . . . . . . . . . . . . . . . . . . . . .137
ASR Detect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189 Breaking Heads, Marshall . . . . . . . . . . . . . . . . . . . . . . . . . . .235 Compaction Mold, Vibration Compaction . . . . . . . . . . . . .80
Atterberg Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-86 Brick Platen Assembly, Compression Machines . . . . . . . .178 Compaction Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Atterberg Limits, Accessories . . . . . . . . . . . . . . . . . . . . . . . . .85 Briquette Mold, Cement . . . . . . . . . . . . . . . . . . . . . . . . . . . .217 Compaction Permeameter. . . . . . . . . . . . . . . . . . . . . . . . . . .90
Atterberg Limits, Cone Penetrometer. . . . . . . . . . . . . . . . . .86 Brushes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331 Compaction Split Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Auger Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Brushes, Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 Compaction, Uniformity . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
Auger Kit Soil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Buffer Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299 Compactor, Hydraulic Steel Roller . . . . . . . . . . . . . . . . . . .2447
Auger Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Calcium Carbonate Content Chamber . . . . . . . . . . . . . . . .84 Compactor, Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Auger Slip (Strap) Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Calibration Anvil, Rebound Hammers . . . . . . . . . . . . . . . .181 Compound Melting Pots . . . . . . . . . . . . . . . . . . . . . . . . . . .167
Auger, Earth Drill. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Calibration Device, Ductilometer . . . . . . . . . . . . . . . . . . . .261 Compression Machine Controllers . . . . . . .170-171,179-180
Auger, Soil Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-30 Calibration Platform, GeoGauge. . . . . . . . . . . . . . . . . . . . . .19 Compression Machine Digital Indicator . . . . . . .170-171,179
Auger, T-Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-30 Calibration Verifier, Electrical Density Gauge . . . . . . . . . . . .14 Compression Machines, Brick Platen Assembly . . . . . . . .178
Augers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-31 Calibration Weights, Balance . . . . . . . . . . . . . . . . . . . . . . . .313 Compression Machines, Compressometer . . . . . . . . . . . .179
Augers, Bucket-Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29 Calibrators, Air Meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148 Compression Machines, Concrete . . . . . . . . . . . . . . .172-176
Augers, Extensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-31 Caliper, Digital. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 Compression Machines, Cube Platen Test Sets . . . . . . . .177
Augers, Iwan-Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Caliper, Mortar Diameter Check . . . . . . . . . . . . . . . . . . . . .206 Compression Machines, Cylinder Loading Shelf. . . . . . . .178
Augers, Snap-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Calipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217 Compression Machines, Cylinder Platens . . . . . . . . . . . . .177
Autoclave Rupture Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221 Calipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332 Compression Machines, Cylinder Splitting Set . . . . . . . . .178
Autoclave, Cement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221 Calorimeter, Cement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208 Compression Machines, Draw Rod Assembly. . . . . . . . . .176
Autoclave, Cement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221 CAPE System, Super Air Meter . . . . . . . . . . . . . . . . . . . . . .146 Compression Machines, Extensometers . . . . . . . . . . . . . .179
Autoclave, High-Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . .220 Capping Pad Sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168 Compression Machines, Flexural Beam Attachment . . . .177
Automatic Vicat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211-212 Carbo Detect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189 Compression Machines, HCM-1000 Series . . . . . . . . . . . .215
AutoRice Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238 Cargo Aircraft Only Label, Nuclear Gauge. . . . . . . . . . . . . .10 Compression Machines, Masonry Platens . . . . . . . . . . . . .177
AutoRice Shaker Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . .238 Carrying Rack, Concrete Cylinders . . . . . . . . . . . . . . . . . . .161 Compression Machines, Platen Carrier Brackets. . . . . . . .176
Bacon Bomb Sampler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270 CBR Mechanical Test Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Compression Machines, Pressure Transducer . . . . . . . . . .179
Bags, Sample . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 CBR Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Compression Machines, Spacers, Platen Adjustment . . .178
Balance Calibration Weights . . . . . . . . . . . . . . . . . . . . . . . .313 CBR Setup, H-4156MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Compression Machines, Strain Transducer . . . . . . . . . . . .179
CBR Setup, HM-2850 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Compression/Flexural Machine, Cement . . . . . . . . . . . . .215
CBR Setup, HM-5030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 Compressometer-Extensometer . . . . . . . . . . . . . . . . . . . . .179

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 353
INDEX Alphabetical
Compressor, Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 Consolidation Installation Kit . . . . . . . . . . . . . . . . . . . . . . . .136 Digital Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
Concrete Air Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 Consolidation Trimming Turntable . . . . . . . . . . . . . . . . . . .109 Direct Shear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110-117
Concrete Air Meters. . . . . . . . . . . . . . . . . . . . . . . . . . . .146-147 Consolidation Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109 Direct Shear Legacy Machine Upgrade . . . . . . . . . . . . . . .115
Concrete Beam Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 Consolidation, Automated . . . . . . . . . . . . . . . . . . . . . .102-103 Direct Shear Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Concrete Beam Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 Consolidation, Dead-Weight . . . . . . . . . . . . . . . . . . . .106-107 Direct Shear, Dead-Weight Manual. . . . . . . . . . . . . . . . . . .114
Concrete Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 Consolidometer, Expansion . . . . . . . . . . . . . . . . . . . . . . . . . .94 Direct Shear, Elite Series Dead-Weight . . . . . . . . . . . . . . . .111
Concrete Capping Ladle. . . . . . . . . . . . . . . . . . . . . . . . . . . .167 Constant Head Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 Direct Shear, Elite Series Pneumatic. . . . . . . . . . . . . . . . . . .110
Concrete Compression Machine Order Matrix . . . . .174-175 Constant Temperature Baths, Viscosity. . . . . . . . . . . .264-265 Direct Shear, High-Capacity . . . . . . . . . . . . . . . . . . . . .116-117
Concrete Compression Machines . . . . . . . . . . . . . . . .172-176 Contact Point Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . .142 Direct Shear, Semi-Automatic Pneumatic. . . . . . . . . . . . . .114
Concrete Compression Machines, Block . . . . . . . . . . . . . .176 Contact Point, Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . .334 Dishes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .326
Concrete Compression Machines, Flexural . . . . . . . . . . . .180 Containment System, Nuclear Gauge . . . . . . . . . . . . . . . . .11 Dispensing Bottles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .323
Concrete Compression Machines, Modulus . . . . . . . . . . .179 Controllers, Compression Machine . . . . . . .170-171,179-180 Display, Single-Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Concrete Compression Machines, Platens. . . . . . . . .177-178 Conversion Chart Labels, Rebound Hammers . . . . . . . . .181 Distillation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .272-274
Concrete Compression Machines, Prism . . . . . . . . . . . . . .176 Core Drill Bits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282 Distillation, Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .274
Concrete Compression Testing . . . . . . . . . . . . . . . . . .169-180 Core Drill, Gas-Powered . . . . . . . . . . . . . . . . . . . . . . . .280-281 Distribution Panels, Triaxial . . . . . . . . . . . . . . . . . . . . . .124-125
Concrete Consistency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155 Core Drill, Trailer Mounted . . . . . . . . . . . . . . . . . . . . . . . . . .281 DMDCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23
Concrete Corrosion Testing . . . . . . . . . . . . . . . . . . . . .187-189 Core Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280-282 Double Ring Infiltrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Concrete Crack Monitors . . . . . . . . . . . . . . . . . . . . . . .198-199 Core Length Measuring Device . . . . . . . . . . . . . . . . . . . . . .166 Drain Down Baskets, Specific Gravity, . . . . . . . . . . . . . . . . .63
Concrete Cube Molds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 CoreSnap Removal Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . .282 Draw Rod Assembly, Compression Machines . . . . . . . . . .176
Concrete Curing Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162 CorMap Rebar Corrosion Mapping . . . . . . . . . . . . . . . . . .188 Drierite Desiccant, Rice Test . . . . . . . . . . . . . . . . . . . . . . . . .239
Concrete Curing Room Fogging Fan . . . . . . . . . . . . . . . . .163 Corrosion, Profometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187 Drill Guide, Exit Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282
Concrete Cylinder Capper . . . . . . . . . . . . . . . . . . . . . . . . . .168 Corrosion, Rapid Chloride. . . . . . . . . . . . . . . . . . . . . . . . . . .188 Drill Rod, Nuclear Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Concrete Cylinder Capping Compound . . . . . . . . . . . . . .167 Counter, Automatic Flow Table . . . . . . . . . . . . . . . . . . . . . .206 Drive Tubes, Density Drive Sampler . . . . . . . . . . . . . . . . . . .21
Concrete Cylinder Capping Kit . . . . . . . . . . . . . . . . . . . . . .167 Crack Monitors, Concrete . . . . . . . . . . . . . . . . . . . . . . .198-199 Dual-Mass DCP, Accessories . . . . . . . . . . . . . . . . . . . . . . 22-23
Concrete Cylinder Carrier . . . . . . . . . . . . . . . . . . . . . . . . . . .166 Cross Hole Ultrasonic Monitor (CHUM) . . . . . . . . . . . . . . .192 Dual-Mass Dynamic Cone Penetrometer. . . . . . . . . . . . 22-23
Concrete Cylinder Carrier . . . . . . . . . . . . . . . . . . . . . . . . . . .166 Crucibles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .326 Ductility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260-263
Concrete Cylinder Carrying Rack. . . . . . . . . . . . . . . . . . . . .161 Cube Pad Caps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217 Ductility Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263
Concrete Cylinder Curing Rack . . . . . . . . . . . . . . . . . . . . . .161 Cube Platen Test Sets, Compression Machines . . . . . . . .177 Ductilometer Calibration Device . . . . . . . . . . . . . . . . . . . . .263
Concrete Cylinder Mold Stripper. . . . . . . . . . . . . . . . . . . . .160 Cube Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216-217 Ductilometer Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263
Concrete Cylinder Molds . . . . . . . . . . . . . . . . . . . . . . . . . . .159 Curing Rack, Concrete Cylinders . . . . . . . . . . . . . . . . . . . . .161 Ductilometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258-261
Concrete Cylinder Prep . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 Curing Tank Circulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162 Ductilometers, Elite Series. . . . . . . . . . . . . . . . . . . . . . .258-259
Concrete Cylinder Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 Cut Back Asphaltic Products. . . . . . . . . . . . . . . . . . . . . . . . .273 Durometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332
Concrete Cylinder, Field Curing Chest . . . . . . . . . . . . . . . .161 Cutting Edge, Compaction Mold . . . . . . . . . . . . . . . . . . . . .78 Dynamic Cone Penetrometer . . . . . . . . . . . . . . . . . . . . . . . .24
Concrete Cylinders Poly Curing Tanks . . . . . . . . . . . . . . . .162 Cylinder Capper, Vertical . . . . . . . . . . . . . . . . . . . . . . . . . . . .168 E-Meter, Flexural Resonance . . . . . . . . . . . . . . . . . . . . . . . .196
Concrete Encounter (Moisture) . . . . . . . . . . . . . . . . . . . . . .201 Cylinder Loading Shelf, Compression Machines. . . . . . . .178 Earth Drill, Auger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Concrete Freeze-Thaw . . . . . . . . . . . . . . . . . . . . . . . . .195-196 Cylinder Mold Strippers . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 Earth Drill, Replacement Points & Blades . . . . . . . . . . . . . . .31
Concrete Grinding Machine. . . . . . . . . . . . . . . . . . . . . . . . .165 Cylinder Molds, Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . .159 Econ-o-Cap Capping Pad Sets . . . . . . . . . . . . . . . . . . . . . .168
Concrete Maturity Meters . . . . . . . . . . . . . . . . . . . . . . . . . . .156 Cylinder Molds, Vibrating Table . . . . . . . . . . . . . . . . . . . . . .155 EDG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14
Concrete Micrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 Cylinder Platens, Compression Machines . . . . . . . . . . . . .177 Electrical Density Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14
Concrete Mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 Cylinder Splitting Set, Compression Machines . . . . . . . . .178 Electrical Density Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14
Concrete Moisture Meter . . . . . . . . . . . . . . . . . . . . . . .200-201 Cylinders, Graduated. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .322 Electrical Density Gauge, Calibration Verifier. . . . . . . . . . . .14
Concrete Pocket-Penetrometer. . . . . . . . . . . . . . . . . . . . . .151 Darts, Electrical Density Gauge . . . . . . . . . . . . . . . . . . . . 12-14 Electrical Density Gauge, Darts . . . . . . . . . . . . . . . . . . . . . . .14
Concrete Pull-Off Testing . . . . . . . . . . . . . . . . . . . . . . . . . . .184 Data Acquisition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139-142 Electrodes, pH Meters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299
Concrete Rebound Hammers . . . . . . . . . . . . . . . . . . . . . . .181 Data Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334 Elite Series, Soil Mechanics Intro . . . . . . . . . . . . . . . . . . . 98-99
Concrete Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183 Data Extension Cable, Transducer. . . . . . . . . . . . . . . . . . . .141 Elite Series, Soil Mechanics Upgrades. . . . . . . . . . . . . . . . . .99
Concrete Tamping (Puddling) Rod . . . . . . . . . . . . . . .150,160 Data Loggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139 Emulsified Asphalt Distillation . . . . . . . . . . . . . . . . . . . . . . .272
Concrete Test Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Data Sheets, Time of Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 Equotip 550 Basic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Concrete Thickness Gauge. . . . . . . . . . . . . . . . . . . . . . . . . .193 DCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Equotip 550 Leeb D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Concrete Vibrator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 DCP, Foundation - Single-Mass . . . . . . . . . . . . . . . . . . . . . . .23 Equotip Leeb Impact Device S. . . . . . . . . . . . . . . . . . . . . . . .69
Concrete, Self-Consolidating . . . . . . . . . . . . . . . . . . . . . . . .154 De-Airing Agitator, Rice Test . . . . . . . . . . . . . . . . . . . . . . . . .238 Equotip, Device Cable, 15ft.. . . . . . . . . . . . . . . . . . . . . . . . . .69
Conductivity Pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299 De-Airing Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141 Equotip, Device Cable, 5ft. . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Cone Penetrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 De-Airing Water System . . . . . . . . . . . . . . . . . . . . . . . . . . . .135 Erlenmeyer Flask Stoppers . . . . . . . . . . . . . . . . . . . . . . . . . .323
Cone Penetrometer, Atterberg Limits . . . . . . . . . . . . . . . . . .85 De-Airing Water Tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135 Erlenmeyer Flasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .323
Cone Penetrometer, Dual Mass . . . . . . . . . . . . . . . . . . . . 22-23 Dean Stark Moisture Test, Asphalts . . . . . . . . . . . . . . . . . . .272 Erosion Function Apparatus . . . . . . . . . . . . . . . . . . . . . . . . .143
Cone Penetrometer, Dynamic . . . . . . . . . . . . . . . . . . . . . . . .24 Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21 Evaporating Dishes, Porcelain . . . . . . . . . . . . . . . . . . . . . . .327
Cone, Sand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Density Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222 ExitPoint Drill Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282
Conical Mold and Tamper . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Density Drive Sampler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 ExitPoint Through-hole Drill Guide . . . . . . . . . . . . . . . . . . .282
Conical Mold, Vicat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214 Density Drive Sampler, Drive Tubes. . . . . . . . . . . . . . . . . . . .21 Expansion Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
ConMatic Consoldation Machine . . . . . . . . . . . . . . . .104-105 Density Sand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Expansion, Consolidometer . . . . . . . . . . . . . . . . . . . . . . . . . .94
ConMatic IPC Consolidation Machine . . . . . . . . . . . .102-103 Desiccant Dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135 Extensions, Contact Point . . . . . . . . . . . . . . . . . . . . . . . . . . .142
Conradson Carbon Residue . . . . . . . . . . . . . . . . . . . . . . . . .270 Dessicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .327 Extensions, Contact Point . . . . . . . . . . . . . . . . . . . . . . . . . . .334
Consistency Vibrating Table Test . . . . . . . . . . . . . . . . . . . . .155 Dial Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142 Extraction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275-277
Consolidation, Soil . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102-109 Dial Indicator Bracket, Compaction Mold . . . . . . . . . . . . . .78
Consolidation Cell Components . . . . . . . . . . . . . . . . . . . . .109 Dial Indicator, Compaction Mold. . . . . . . . . . . . . . . . . . . . . .78
Consolidation Cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 Digital Indicator Cable, 6ft. . . . . . . . . . . . . . . . . . . . . . . . . . .139
Consolidation Frame Stands . . . . . . . . . . . . . . . . . . . . . . . .106 Digital Indicator, Compression Machine. . . . . . .170-171,179

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

354
Alphabetical INDEX
Extractor, Centrifuge . . . . . . . . . . . . . . . . . . . . . . . . . . .275-276 Heater/Circulator Assembly . . . . . . . . . . . . . . . . . . . . . . . . . .62 Marshall Testing Load Rings . . . . . . . . . . . . . . . . . . . . . . . . .235
Extractor, Reflux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277 Heater/Circulator, Immersion . . . . . . . . . . . . . . . . . . . . . . . .164 Marshall Testing Water Baths . . . . . . . . . . . . . . . . . . . . . . . .236
Extractor, Vacuum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275 High-Low Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283 Masonry Platens, Compression Machines . . . . . . . . . . . . .177
Falling Sand, Abrasion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 High-Vacuum Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 Masonry Saw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165
Field CBR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Hot Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320-321 MasterLoader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118-121
Field Curing Chest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161 Hotplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334 Mat Depth Gauge, Fireproofing . . . . . . . . . . . . . . . . . . . . .222
Filter Paper, Compaction Mold . . . . . . . . . . . . . . . . . . . . . . .78 Hubbard-Carmick, Specific Gravity . . . . . . . . . . . . . . . . . . . .64 Maturity Meters, Concrete . . . . . . . . . . . . . . . . . . . . . . . . . .156
Filter Paper, Strips-Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . . .137 Humidifier, HumiDisk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163 Maturity, Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
Filter Paper, Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Hydrometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 Measure, Vicat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214
Filter Screen, Compaction Mold . . . . . . . . . . . . . . . . . . . . . .78 Hydrometer Analysis Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 Measures, Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .326
Filter/Regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135 Hydrometer Jar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 Mechanical Balance Accessories . . . . . . . . . . . . . . . . . . . . .312
Filters, Reflux Extraction. . . . . . . . . . . . . . . . . . . . . . . . . . . . .277 Hydrometer Jar Bath . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 Mechanical Balances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .311
Flakiness Sieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 ICOR™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 Mechanical Compactor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Flash Point Tester, Cleveland . . . . . . . . . . . . . . . . . . . . . . . .271 Immersion Circulator and Heater. . . . . . . . . . . . . . . . . . . . .162 Membrane Stretcher, Triaxial . . . . . . . . . . . . . . . . . . . . . . . .138
Flash Tester, Tag, Open-Cup . . . . . . . . . . . . . . . . . . . . . . . .270 Impact Value, Aggregate . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Membrane Stretcher, Triaxial . . . . . . . . . . . . . . . . . . . . . . . .138
Flasks, Erlenmeyer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .323 Indicator Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334 Membrane Tester, Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . . .138
Flex Panels, Permeability. . . . . . . . . . . . . . . . . . . . . . . . . . 92-93 Indicator Mount, Magnetic . . . . . . . . . . . . . . . . . . . . . . . . .142 Membranes, Latex, Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . .138
Flexural Beam Attachment, Compression Machines . . . .177 Indicators, Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334 Micro-Deval. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Flexural Concrete Compression Machines. . . . . . . . . . . . .180 Installation Kit, Consolidation . . . . . . . . . . . . . . . . . . . . . . . .136 Micrometer Bridge Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207
Flexural Resonance, E-Meter . . . . . . . . . . . . . . . . . . . . . . . .196 Installation Kit, Shear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 Micron Air Jet Sieving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Float Test, Asphalt Viscosimeter . . . . . . . . . . . . . . . . . . . . .268 J-Ring Test Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 Micron Air-Jet Cyclone, High-Efficiency . . . . . . . . . . . . . . . .61
Flow Cone, Grout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207 K Slump Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 Micron Air-Jet Sieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Flow Molds, Flow Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . .206 L-Box Flowability Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 Micron Air-Jet Vacuum System. . . . . . . . . . . . . . . . . . . . . . . .61
Flow Properties, Mortar . . . . . . . . . . . . . . . . . . . . . . . . .206-207 Lab Ovens, Bitumen Testing. . . . . . . . . . . . . . . . . . . . . . . . .256 Mini-Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Flow Table, Cement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206 LBR Mold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Miter Box, Split, Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
Flow, Mortar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206 Le Chatelier Specific Gravity Flask . . . . . . . . . . . . . . . . . . . . .64 Mixer, 5 Qt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240
Flowmeter Kit, Marshall . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235 Leak Test Kit, Nuclear Gauge . . . . . . . . . . . . . . . . . . . . . . . . .10 Mixer, 5-Qt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Fogging Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163 Length Comparator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 Mixer, ASTM-Compliant . . . . . . . . . . . . . . . . . . . . . . . . . . . .205
Ford Cups, Viscosity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268 Length Comparator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219 Mixer, Bench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240
Foundation, Single-Mass DCP . . . . . . . . . . . . . . . . . . . . . . . .23 Level Indicator, Water. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Mixer, Bench, Laboratory . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Four-Point Bending Test Machine . . . . . . . . . . . . . . . .248-249 Lightweight Deflectometer . . . . . . . . . . . . . . . . . . . . . . . 16-17 Mixer, Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Freeze-Thaw, Concrete . . . . . . . . . . . . . . . . . . . . . . . . .195-196 Lightweight Deflectometer, Accessories . . . . . . . . . . . . . . .17 Mixer, Lightweight Wheelbarrow . . . . . . . . . . . . . . . . . . . .157
Funnel, Slump Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 Linear Potentiometer Transducers . . . . . . . . . . . . . . . . . . . .141 Mixer, Soil and Mortar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Furnaces, Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320 Linear Strain Transducer Bracket, Marshall . . . . . . . . . . . . .141 Mixer, Tow Kit Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Furnaces, Muffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320 Linear Strain Transducers. . . . . . . . . . . . . . . . . . . . . . . . . . . .141 Mixer, Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Gauge Set, Relative Density . . . . . . . . . . . . . . . . . . . . . . . . . .80 Linear Strain Transducers Bracket. . . . . . . . . . . . . . . . . . . . .141 Mixers, Asphalt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240-241
Gauge Studs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218 Linear Traverse Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . .197 Mixers, Asphalt/Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . .241
Gauges, Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334 Liquid Limit, Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 Mixing, Mortar and Cement . . . . . . . . . . . . . . . . . . . . .204-205
GeoGauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19 Liquid Limit, ASTM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-86 Moh's Scale of Hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
GeoGauge, Calibration Platform. . . . . . . . . . . . . . . . . . . . . .19 Load Cell Stud, Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . .140 Moisture Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .327
GeoGauge, Data Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Load Cells, Pancake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 Moisture Boxes, Aluminum. . . . . . . . . . . . . . . . . . . . . . . . . .263
GeoGauge, Verifier Mass . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Load Cells, S-type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 Moisture in Concrete Slabs . . . . . . . . . . . . . . . . . . . . . .200-201
Geovane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Load Cells, Submersible . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 Moisture Meter, Cementometer . . . . . . . . . . . . . . . . . . . . .151
Gillmore Apparatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209 Load Frames, Marshall . . . . . . . . . . . . . . . . . . . . . . . . .232-234 Moisture Meter, Concrete Slabs. . . . . . . . . . . . . . . . . .200-201
Gilson, Testing Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-44 Load Frames, Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . . .118-122 Moisture Tester (Speedy) Reagent. . . . . . . . . . . . . . . . . . . . .65
Glass Plate, Vicat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214 Load Rings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142 Moisture Tester, Soil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332 Load Rings, Marshall Testing. . . . . . . . . . . . . . . . . . . . . . . . .235 Moisture Tester, Speedy . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Goggles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330 Loggers, Temperature/RH . . . . . . . . . . . . . . . . . . . . . . . . . .164 Moisture Tester, Speedy® 2000 . . . . . . . . . . . . . . . . . . . . . .65
Grand Loader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118-121 Los Angeles, Abrasion Machine. . . . . . . . . . . . . . . . . . . . . . .67 Mold Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Grinding Machine Accessories. . . . . . . . . . . . . . . . . . . . . . .165 Loss-on-Heat Thin Film Oven. . . . . . . . . . . . . . . . . . . . . . . .256 Mold Container, Vicat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214
Grinding Machine, Automatic . . . . . . . . . . . . . . . . . . . . . . .165 Mallets, Rubber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330 Mold Strippers, Concrete Cylinders . . . . . . . . . . . . . . . . . .160
Grinding Mill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Manometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 Mold Strippers, Quick Strip. . . . . . . . . . . . . . . . . . . . . . . . . .160
Grinding Stone, Rebound Hammers . . . . . . . . . . . . . . . . .181 Manometer Rice Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237 Mold, CBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Ground Penetrating Radar . . . . . . . . . . . . . . . . . . . . . . . . . .185 Marsh Funnel Viscometer . . . . . . . . . . . . . . . . . . . . . . . . . . .222 Mold, Compaction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Grout Flow Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207 Marshall Breaking Heads. . . . . . . . . . . . . . . . . . . . . . . . . . . .235 Mold, Compaction Split . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Guelph Permeameter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Marshall Compaction Molds . . . . . . . . . . . . . . . . . . . . . . . .231 Mold, LBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Guth Wash Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .323 Marshall Compactor, Double Compactor . . . . . . . . .228-229 Mold, Proctor Compaction . . . . . . . . . . . . . . . . . . . . . . . . . .77
Gyratory, Superpave . . . . . . . . . . . . . . . . . . . . . . . . . . .250-251 Marshall Compactor, Heavy-Duty . . . . . . . . . . . . . . . .226-227 Molds, Concrete Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
Hamburg Wheel Tracker . . . . . . . . . . . . . . . . . . . . . . . . . . . .246 Marshall Compactor, Single Compactor . . . . . . . . . .228-229 Molds, Concrete Cube . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
Hammer, 4 lb., Double-Faced, Nuclear Gauge. . . . . . . . . .10 Marshall Compactor, Triple Compactor . . . . . . . . . . .228-229 Molds, Marshall Compaction . . . . . . . . . . . . . . . . . . . . . . .231
Hammers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330 Marshall Flowmeter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235 Mortar & Pestle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .333
Harvard Miniature Compaction Apparatus . . . . . . . . . . . . .84 Marshall Hand Compactors . . . . . . . . . . . . . . . . . . . . . . . . .230 Mortar and Cement, Mixing . . . . . . . . . . . . . . . . . . . . .204-205
Heat Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .321 Marshall Load Frames . . . . . . . . . . . . . . . . . . . . . . . . . .232-234 Mortar Bar Container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
Marshall Module NEXT Software. . . . . . . . . . . . . . . . . . . . .233 Mortar Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
Marshall Sample Ejector, Hand-Operated . . . . . . . . . . . . .231 Mortar Flow Properties . . . . . . . . . . . . . . . . . . . . . . . . .206-207
Marshall Sample Ejector, Motorized . . . . . . . . . . . . . . . . . .231 Mortar Flow Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 355
INDEX Alphabetical
Mortar Penetration Resistance Apparatus . . . . . . . . . . . . .155 Permeability Cells. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91 Rebar Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
Mud Balance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222 Permeability, Flex Panels . . . . . . . . . . . . . . . . . . . . . . . . . . 92-93 Rebound Hammer, Humboldt . . . . . . . . . . . . . . . . . . . . . . .181
Muffle Furnaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320 Permeameter, Asphalt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285 Rebound Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
Multi-speed Load Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . .122 Permeameter, Compaction . . . . . . . . . . . . . . . . . . . . . . . . . .90 Rebound Hammers, Calibration Anvil . . . . . . . . . . . . . . . .182
NCAT Field Permeameter . . . . . . . . . . . . . . . . . . . . . . . . . .285 Permeameter, Constant Head . . . . . . . . . . . . . . . . . . . . . . . .89 Rebound Hammers, Conversion Chart Labels . . . . . . . . .182
NCAT Furnace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257 Permeameter, Falling Head . . . . . . . . . . . . . . . . . . . . . . . . . .89 Rebound Hammers, Grinding Stone . . . . . . . . . . . . . . . . .182
NEXT Software Module, Marshall . . . . . . . . . . . . . . . . . . . .233 Permeameter, Manometer . . . . . . . . . . . . . . . . . . . . . . . . . . .90 Rebound Hammers, Replacement Parts . . . . . . . . . . . . . .182
NEXT Software Test Specific Modules . . . . . . . . . . . .100-101 Permeameter, NCAT Field . . . . . . . . . . . . . . . . . . . . . . . . . .285 Reflux Extraction, Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . .277
NEXT Software, CBR/LBR Module . . . . . . . . . . . . . . . . . . . .81 Permeameter, Shelby Tube . . . . . . . . . . . . . . . . . . . . . . . . . .89 Reflux Extractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277
Nuclear Density Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9 pH Meter Electrodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299 Reflux Extractor Pressure Limit . . . . . . . . . . . . . . . . . . . . . . .277
Nuclear Gauge Containment System. . . . . . . . . . . . . . . . . .11 pH Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299 Refrigeration Dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Nuclear Gauge Drill Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Phunque Flask, Specific Gravity . . . . . . . . . . . . . . . . . . . . . . .64 Relative Density Apparatus. . . . . . . . . . . . . . . . . . . . . . . . . . .80
Nuclear Gauge Rod Extraction Tool . . . . . . . . . . . . . . . . . . .10 Pin Hole Dispersion Apparatus . . . . . . . . . . . . . . . . . . . . . . .87 Relative Density Mold Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Nuclear Gauge Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Plastic Limit Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 Relative Humidity, Hygro-i Probe . . . . . . . . . . . . . . . . . . . . .201
Nuclear Gauge, Caution Radioactive Material Sign . . . . . .10 Plate Load Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Replacement Parts, Air Meter. . . . . . . . . . . . . . . . . . . .148-149
Nuclear Gauge, Hammer, 4 lb., Double-Faced. . . . . . . . . .10 Platen Carrier Brackets, Compression Machines. . . . . . . .176 Replacement Parts, Rebound Hammers . . . . . . . . . . . . . .182
Nuclear Gauge, Leak Test Kit . . . . . . . . . . . . . . . . . . . . . . . . .10 Platen, Swivel Top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 Resiliency Tester, Liquid Limit . . . . . . . . . . . . . . . . . . . . . . . . .85
Nuclear Gauge, Radiation Alert Monitor . . . . . . . . . . . . . . .11 Point Load Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Resipod Resistivity Meter . . . . . . . . . . . . . . . . . . . . . . . . . . .193
Nuclear Gauge, Security Restraint . . . . . . . . . . . . . . . . . . . . .11 Polishing Machine, Accelerated. . . . . . . . . . . . . . . . . . . . . .284 Resistance Needle, Mortar Penetration . . . . . . . . . . . . . . .155
Nuclear Gauge, Security Seal . . . . . . . . . . . . . . . . . . . . . . . . .10 Poly Curing Tanks, Concrete Cylinders . . . . . . . . . . . . . . . .162 Resistance Needles, Acme Penetrometer . . . . . . . . . . . . .151
Nuclear Gauge, Software and Data Cable. . . . . . . . . . . . . .10 Pore Pressure Transducer . . . . . . . . . . . . . . . . . . . . . . . . . . .135 Resistivity Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Nuclear Gauge, Transit Label – Yellow II . . . . . . . . . . . . . . . .10 Pore Pressure Transducer . . . . . . . . . . . . . . . . . . . . . . . . . . .141 Resistivity Meter Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Nuclear Gauge, Type A Label . . . . . . . . . . . . . . . . . . . . . . . .10 Pore Pressure, Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141 Resistivity Test Reel with Soil Pins . . . . . . . . . . . . . . . . . . . . . .34
Nuclear, Gauge, Cargo Aircraft Only Label . . . . . . . . . . . . .10 Porous Stones, Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Resistivity, Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . .193-194
Nuclear, Gauge, NUX Box . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Porta-Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Resonance Test Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
NUX Box, Nuclear Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Pouring Funnel Set, Relative Density. . . . . . . . . . . . . . . . . . .80 Restraining Cage, Prism Molds . . . . . . . . . . . . . . . . . . . . . .218
O-Ring Placing Tool, Triaxial . . . . . . . . . . . . . . . . . . . . . . . . .138 Precision Diameter Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 Rhoma-Sol Emulsifier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257
O-Rings, Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Precision Diameter Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 Rice Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237-239
Organic Color Wheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208 Precision, 3-gang Mold, Cement. . . . . . . . . . . . . . . . . . . . .215 Rice Test, Air Drying Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . .239
Organic Impurities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208 Pressure Aging Vessel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253 Rice Test, De-Airing Agitator. . . . . . . . . . . . . . . . . . . . . . . . .238
Oven, Vacuum Degassing . . . . . . . . . . . . . . . . . . . . . .253-254 Pressure Aging Vessel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253 Rice Test, Drierite Desiccant . . . . . . . . . . . . . . . . . . . . . . . . .239
Ovens, Bench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .316-319 Pressure Controller, Triaxial Setup . . . . . . . . . . . . . . . . . . . .134 Rice Test, Manometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237
Ovens, Bench Large Capacity . . . . . . . . . . . . . . . . . . .317-319 Pressure Regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 Rice Test, Orbital De-Airing Device . . . . . . . . . . . . . . . . . . .238
Ovens, Laboratory . . . . . . . . . . . . . . . . . . . . . . . . . . . . .314-315 Pressure Transducer, Compression Machines . . . . . . . . . .179 Rice Test, Pycnometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237
Overlay Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .252 Pressure Transducer, Digital . . . . . . . . . . . . . . . . . . . . . . . . .141 Rice Test, Vacuum Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . .239
Pad Caps, Cube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217 Printer Paper, Plate Load Tester . . . . . . . . . . . . . . . . . . . . . . .15 Ring and Ball Apparatus . . . . . . . . . . . . . . . . . . . . . . . .268-269
Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .324-325 Prism Bar Frame for Autoclave . . . . . . . . . . . . . . . . . . . . . . .220 Ring and Ball Apparatus, Digital. . . . . . . . . . . . . . . . . .268-269
Particle Charge Meter, Asphalts . . . . . . . . . . . . . . . . . . . . . .273 Prism Mold Gauge Studs . . . . . . . . . . . . . . . . . . . . . . . . . . .218 Rock Breaker Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Pedestal Form, Flow Table . . . . . . . . . . . . . . . . . . . . . . . . . .206 Prism Molds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218 Rock Schmidt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Penetration Apparatus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 Prism Molds Restraining Cage . . . . . . . . . . . . . . . . . . . . . . .218 Rock Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-70
Penetration Piston, Compaction Mold . . . . . . . . . . . . . . . . .78 Probe Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Rod Extraction Tool, Nuclear Gauge . . . . . . . . . . . . . . . . . .10
Penetrometer Foot, Concrete . . . . . . . . . . . . . . . . . . . . . . .151 Proctor Compaction Mold . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Rolling Thin Film Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255
Penetrometer for Battery Paste . . . . . . . . . . . . . . . . . . . . . .262 Proctor Penetrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Rotational Viscometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256
Penetrometer Needles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263 Proctor Penetrometer Needle . . . . . . . . . . . . . . . . . . . . . . . .24 Rupture Disk, Autoclave . . . . . . . . . . . . . . . . . . . . . . . . . . . .221
Penetrometer, Acme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 Profometer Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187 Sample Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Penetrometer, Atterberg Cone . . . . . . . . . . . . . . . . . . . . . . .86 Profoscope+ Rebar Locator . . . . . . . . . . . . . . . . . . . . . . . . .186 Sample Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332
Penetrometer, Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Proportional Caliper Device . . . . . . . . . . . . . . . . . . . . . . . . . .66 Sample Cans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .327
Penetrometer, Cone - COE . . . . . . . . . . . . . . . . . . . . . . . . . .26 Pull-Off Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183 Sample Cans, Penetration. . . . . . . . . . . . . . . . . . . . . . . . . . .263
Penetrometer, Cone - Proving Ring. . . . . . . . . . . . . . . . . . . .26 Pulse Echo Imaging, Ultrasonic . . . . . . . . . . . . . . . . . .190-192 Sample Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
Penetrometer, Digital. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262 PumpSaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238 Sample Container, Specific Gravity . . . . . . . . . . . . . . . . . . . .63
Penetrometer, Digital Static Cone . . . . . . . . . . . . . . . . . . . . .26 Pundit Lab, Ultrasonic Test Device . . . . . . . . . . . . . . . . . . . .190 Sample Cup, Tin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .327
Penetrometer, Digital Static Cone . . . . . . . . . . . . . . . . . . . . .26 Pundit Ultrasonic Pulse Velocity and Echo . . . . . . . . . . . . .190 Sample Ejector, Hand-Operated . . . . . . . . . . . . . . . . . . . . . .76
Penetrometer, Dual-Mass . . . . . . . . . . . . . . . . . . . . . . . . . 22-23 Pycnometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Sample Ejector, Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Penetrometer, Dynamic Cone . . . . . . . . . . . . . . . . . . . . . . . .24 Pycnometer Top and Glass Jar. . . . . . . . . . . . . . . . . . . . . . . .61 Sample Ejector, Motorized . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Penetrometer, Electric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264 Pycnometer, Rice Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237 Sample Jars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .327
Penetrometer, Pocket - Soil. . . . . . . . . . . . . . . . . . . . . . . . . . .27 Pycnometers, Specific Gravity . . . . . . . . . . . . . . . . . . . . . . . .64 Sample Reduction, 16-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Penetrometer, Pocket-Concrete . . . . . . . . . . . . . . . . . . . . .151 Quadri-Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Sample Splitter, Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Penetrometer, Portable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262 Quartering Canvas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Sample Splitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-41
Penetrometer, Proctor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 QuarterMaster Asphalt Sample Splitter . . . . . . . . . . . . . . .241 Sample Splitters, Enclosed . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Penetrometer, Static Cone . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Radiation Alert Monitor, Nuclear Gauge . . . . . . . . . . . . . . .11 Sample Splitters, Micro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Penetrometer, Universal . . . . . . . . . . . . . . . . . . . . . . . . . . . .262 Rain Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .333 Sample Splitters, One-Piece . . . . . . . . . . . . . . . . . . . . . . . . .38
Penetrometer, Vicat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213 Rapid Chloride . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188 Sample Splitters, Precision . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Penetrometers, Bituminous Material. . . . . . . . . . . . . .262-263 Rapid Soil Processor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Sample Splitters, Removable Hopper. . . . . . . . . . . . . . . . . .38
Perfa-Cure Mini Curing Box . . . . . . . . . . . . . . . . . . . . . . . . .161 Rapid Soil Processor, Replacement Screens. . . . . . . . . . . . .74
Perma2 Rapid Chloride Permeability . . . . . . . . . . . . . . . . .188 RCON2™ Concrete Resistivity . . . . . . . . . . . . . . . . . . . . . .194
Permeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89-93 Reaction Container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

356
Alphabetical INDEX
Sample Trimmer, Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Sieve Shaker, Ro-Tap® Stand . . . . . . . . . . . . . . . . . . . . . . . . .59 Soil Sampling Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Sampler, Bacon Bomb . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270 Sieve Shaker, Variable-Speed, Digital Timer. . . . . . . . . . . . .57 Soil Sampling Tube Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Sampler, Weighted Beaker. . . . . . . . . . . . . . . . . . . . . . . . . .270 Sieve Shaker, Wet/Dry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Soil Sampling, Augers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-30
Sampling Augers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-30 Sieve Shakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-60 Soil Tester, Unconfined . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Sand Cone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Sieve Sifter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Soil Volume Change Meter. . . . . . . . . . . . . . . . . . . . . . . . . . .94
Sand Cone Apparatus Set . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Sieve Sifter, Mary Ann® . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Sonic Echo Foundation Tester . . . . . . . . . . . . . . . . . . . . . . .194
Sand Cone Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Sieve Sifter, Rotary Lab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Sound Enclosure, Ro-Tap®. . . . . . . . . . . . . . . . . . . . . . . . . . .59
Sand Content Test Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222 Sieve, Balls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Spacer Disk, Mold, Compaction Mold . . . . . . . . . . . . . . . . .78
Sand Equivalent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 Sieve, Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Spacers, Platen Adjustment, Compression Machines . . .178
Sand Equivalent Stock Solution . . . . . . . . . . . . . . . . . . . . . . .87 Sieve, Glass Beads NIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Spatulas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329
Sand Equivalent Test Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 Sieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-57 Specific Gravity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61-64
Sand, Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Sieves, 10" ASTM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Specific Gravity Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Saybolt Viscosity Bath . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267 Sieves, 12" ASTM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Specific Gravity Bench. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Saybolt Viscosity Bath Accessories . . . . . . . . . . . . . . . . . . .267 Sieves, 12" ASTM Calibration . . . . . . . . . . . . . . . . . . . . . . . .49 Specific Gravity Flask, Chapman . . . . . . . . . . . . . . . . . . . . . .64
Scale-Bench, Adam CBK . . . . . . . . . . . . . . . . . . . . . . . . . . .310 Sieves, 12" ASTM Deep . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Specific Gravity Flask, Le Chatelier . . . . . . . . . . . . . . . . . . . .64
Scale-Bench, Ohaus Defender. . . . . . . . . . . . . . . . . . . . . . .309 Sieves, 12" ASTM Inspection . . . . . . . . . . . . . . . . . . . . . . . . .51 Specific Gravity Sieve #4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Scale-Bench, Ohaus ES . . . . . . . . . . . . . . . . . . . . . . . . . . . . .310 Sieves, 3" ASTM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Specific Gravity Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Scale-Bench, Ohaus Ranger Compact . . . . . . . . . . . . . . . .307 Sieves, 4" ASTM Deep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Specific Gravity, Balances . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Scale-Portable, Adam ABK. . . . . . . . . . . . . . . . . . . . . . . . . .309 Sieves, 5" ASTM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Specific Gravity, Drain Down Baskets . . . . . . . . . . . . . . . . . .63
Scale-Portable, Adam CPWplus . . . . . . . . . . . . . . . . . . . . .309 Sieves, 6" ASTM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Specific Gravity, Fine Aggregate Kit . . . . . . . . . . . . . . . . . . .61
Scale, Portable Bench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312 Sieves, 8" ASTM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Specific Gravity, Hollow Tube Cradle . . . . . . . . . . . . . . . . . .63
Scale, Suspension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312 Sieves, 8" ASTM Calibration. . . . . . . . . . . . . . . . . . . . . . . . . .48 Specific Gravity, Hubbard-Carmick . . . . . . . . . . . . . . . . . . . .64
Scales & Balances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300-312 Sieves, 8" ASTM Inspection . . . . . . . . . . . . . . . . . . . . . . . . . .50 Specific Gravity, Phunque Flask . . . . . . . . . . . . . . . . . . . . . . .64
Scales and Balances Comparison Chart . . . . . . . . . . .300-301 Sieves, Air Jet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Specific Gravity, Pycnometers . . . . . . . . . . . . . . . . . . . . . . . .64
SCB Bending Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235 Sieves, ASTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-57 Specific Gravity, Sample Container . . . . . . . . . . . . . . . . . . . .63
Schmidt Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Sieves, Pans and Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Specific Gravity, Utility Bucket. . . . . . . . . . . . . . . . . . . . . . . . .63
Scoops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324, 328 Sieves, Wet Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Specimen Grinding Machine . . . . . . . . . . . . . . . . . . . . . . . .165
Scraper Plate/Rod Guide, Nuclear Gauge . . . . . . . . . . . . .10 Sign, Caution Radioactive Material . . . . . . . . . . . . . . . . . . . .10 Specimen Grinding Machine . . . . . . . . . . . . . . . . . . . . . . . .165
Scratch Hardness Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Silver Schmidt Hammer. . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Speedy Moisture Tester. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Screen Shaker, Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Single-Channel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141 Speedy Reagent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Screen Shakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-44 Skid Resistance Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284 Speedy Tester, Calibration Kit. . . . . . . . . . . . . . . . . . . . . . . . .65
Screen Trays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Slake Drum and Tank Assembly. . . . . . . . . . . . . . . . . . . . . . .67 Speedy, Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . .65
Sealing Wax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Slake Durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Speedy® 2000 Moisture Tester . . . . . . . . . . . . . . . . . . . . . . .65
Security Restraint for Nuclear Gauge . . . . . . . . . . . . . . . . . .11 Slake Durability Wire Mesh Drums . . . . . . . . . . . . . . . . . . . .67 Split Former, Vacuum, Triaxial . . . . . . . . . . . . . . . . . . . . . . . .138
Security Seal, Nuclear Gauge . . . . . . . . . . . . . . . . . . . . . . . . .10 Slide Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Splitter, Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Self-Consolidating Concrete . . . . . . . . . . . . . . . . . . . . . . . .154 Slump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152-153 Splitter, California . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Semi-Circular Bending Head . . . . . . . . . . . . . . . . . . . . . . . .235 Slump Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 Splitter, Enclosed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Separator Pans, Sieve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Slump Cone Base Plate, Aluminum . . . . . . . . . . . . . . . . . .153 Splitter, Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Setups, Triaxial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126-133 Slump Cone Funnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 Splitter, Mini. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Setups, Triaxial- Auto Control . . . . . . . . . . . . . . . . . . . .128-129 Slump Cone Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 Splitter, Porta- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Setups, Triaxial- FlexPanel . . . . . . . . . . . . . . . . . . . . . .132-133 Slump Pan, Galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 Splitter, Quadri-. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Setups, Triaxial- Manual Control. . . . . . . . . . . . . . . . . .130-131 Smart DCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Splitter, Universal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Shakers, Sieve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-60 SmartRock2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156 Splitter, Versa- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Shear Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 Sodium Hexametaphosphate . . . . . . . . . . . . . . . . . . . . . . . .88 Spot Test of Asphaltic Materials Set. . . . . . . . . . . . . . . . . . .268
Shear Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-25 Sodium Hydroxide Beads. . . . . . . . . . . . . . . . . . . . . . . . . . .208 Stands, Consolidation Frame . . . . . . . . . . . . . . . . . . . . . . .106
Shear Vane, Pocket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Softening Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268-269 Static Plate Load Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Shearbox Assemblies & Parts . . . . . . . . . . . . . . . . . . . . . . . .115 Softening Point Accessories . . . . . . . . . . . . . . . . . . . . . . . . .269 Static Segregation Column. . . . . . . . . . . . . . . . . . . . . . . . . .154
Shelby Tubes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Softening Point Thermometers . . . . . . . . . . . . . . . . . . . . . .269 Steel Roller Compactor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247
Shelby Tubes, Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Software and Data Cable, Nuclear Gauge. . . . . . . . . . . . . .10 Straight Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331
Shelby Tubes, Expansion Packer . . . . . . . . . . . . . . . . . . . . . .32 Software, NEXT Test Specific Modules. . . . . . . . . . . . . . . .101 Straight Edge, Flow Table . . . . . . . . . . . . . . . . . . . . . . . . . . .206
Shelby Tubes, Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Soil Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Strain Gauge Set, Multi-Length . . . . . . . . . . . . . . . . . . . . . .197
Shovels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332 Soil Box Leads, Resistivity . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Strain Transducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
Shrinkage Limit Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 Soil Color Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Strain Transducer, Compression Machines. . . . . . . . . . . . .179
Sieve Riddle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Soil Consolidation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102-109 Strength, Concrete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Sieve Rocker-Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Soil Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Strike-Off Plates, Unit Weight . . . . . . . . . . . . . . . . . . . . . . . .150
Sieve Separator Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Soil Dispersion Air-Jet Tube . . . . . . . . . . . . . . . . . . . . . . . . . .89 Super Air Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
Sieve Set, Soil Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Soil Dispersion Mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88-89 Super Air Meter, CAPE System . . . . . . . . . . . . . . . . . . . . . .146
Sieve Shaker, 3" Sieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Soil Dispersion, Hand Stirrer . . . . . . . . . . . . . . . . . . . . . . . . . .89 Superpave Gyratory. . . . . . . . . . . . . . . . . . . . . . . . . . . .250-251
Sieve Shaker, Digital Timer . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Soil Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Surcharge Weight, Compaction Mold . . . . . . . . . . . . . . . . .78
Sieve Shaker, Dura Tap™, Motorized . . . . . . . . . . . . . . . . . .59 Soil Mortar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 Surcharge Weight, Compaction Mold . . . . . . . . . . . . . . . . .78
Sieve Shaker, Hand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Soil Pestle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 Surf™ Surface Resistivity . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
Sieve Shaker, Humboldt, Economy . . . . . . . . . . . . . . . . . . . .58 Soil Pins (Electrodes), Resistivity . . . . . . . . . . . . . . . . . . . . . . .34 Swell Plate, Compaction Mold. . . . . . . . . . . . . . . . . . . . . . . .78
Sieve Shaker, Humboldt, Large, Economy . . . . . . . . . . . . .58 Soil Sample Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 Swell Tripod Attachment, Compaction Mold . . . . . . . . . . .78
Sieve Shaker, Ro-Tap® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Soil Sample Wire Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 Tag, Open-Cup Flash Tester . . . . . . . . . . . . . . . . . . . . . . . . .270
Soil Sampling Auger Tube Set . . . . . . . . . . . . . . . . . . . . . . . .30 Tamper, Cube Molds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217
Soil Sampling Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Tamping (Puddling) Rod, Concrete . . . . . . . . . . . . . . .150,160

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 357
INDEX Alphabetical
Tamping Rod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 Trowels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329 Weights, Consolidation . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Tamping Rod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218 Tube Sampler, Cement . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205 Weights, Direct Shear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Tamping Rod, Slump Cone . . . . . . . . . . . . . . . . . . . . . . . . .153 Turbidimeter, Wagner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220 Wet Washing Sieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Tank Heater, Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162 Type A Label, Nuclear Gauge . . . . . . . . . . . . . . . . . . . . . . . .10 Wet Washing Sieves, Cement . . . . . . . . . . . . . . . . . . . . . . . .57
Tank, Specific Gravity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Ultrasonic Pulse Velocity Tester. . . . . . . . . . . . . . . . . . . . . . .189 Whisks, Heavy-Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240
Tape Measure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 Ultrasonic, Pulse Echo Imaging . . . . . . . . . . . . . . . . . .190-192 Windsor HP Pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Test Bar Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221 Unconfined Soil Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 Windsor HP Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Test Bar Holder, Cement . . . . . . . . . . . . . . . . . . . . . . . . . . . .220 Unit Weight Measures, ASTM . . . . . . . . . . . . . . . . . . . . . . .150 Wire Saw, Soil Sample . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
Test Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181 Unit Weight Measures, NON-ASTM. . . . . . . . . . . . . . . . . .150 Zeitfuchs Cross-Arm Viscometer . . . . . . . . . . . . . . . . . . . . .265
Test Sand, ASTM 20-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205 Unit Weight Strike-Off Plates . . . . . . . . . . . . . . . . . . . . . . . .150 Zeitfuchs Viscometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .265
Test Sand, Ottawa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205 Universal Tester Accessories . . . . . . . . . . . . . . . . . . . . . . . .245
Test Sieves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-57 Universal Testing Machine . . . . . . . . . . . . . . . . . . . . . .242-245
Testing Screens, Gilson . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-44 Upgrades to Elite Series Machines . . . . . . . . . . . . . . . . . . . .99
Thermometers, ASTM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .297 V-Funnel Flowability Test . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
Thermometers, Data Logger . . . . . . . . . . . . . . . . . . . . . . . .290 Vacuum Pressure Regulator, Temp. Bath . . . . . . . . . . . . . .265
Thermometers, Dial, Pocket . . . . . . . . . . . . . . . . . . . . . . . . .295 Vacuum Degassing Oven . . . . . . . . . . . . . . . . . . . . . . .253-254
Thermometers, Digital Accessories. . . . . . . . . . . . . . . . . . .292 Vacuum Extractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .276
Thermometers, Digital IR . . . . . . . . . . . . . . . . . . . . . . . . . . .291 Vacuum Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
Thermometers, Digital Kits . . . . . . . . . . . . . . . . . . . . . . . . . .290 Vacuum Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
Thermometers, Digital Min/Max . . . . . . . . . . . . . . . . . . . . .293 Vacuum Pump Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .239
Thermometers, Digital Precision . . . . . . . . . . . . . . . . .288-290 Vacuum Pump, Rice Test . . . . . . . . . . . . . . . . . . . . . . . . . . . .239
Thermometers, Digital Stem . . . . . . . . . . . . . . . . . . . . . . . .294 Vane Inspection Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Thermometers, Dual Scale . . . . . . . . . . . . . . . . . . . . . . . . . .295 Vane Testers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Thermometers, General Purpose . . . . . . . . . . . . . . . . . . . .295 Vapor Emission Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
Thermometers, Mercury-Free . . . . . . . . . . . . . . . . . . . . . . .296 Vebe Consistometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Thermometers, Min/Max . . . . . . . . . . . . . . . . . . . . . . . . . . .293 Verifier Mass, GeoGauge . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Thermometers, Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298 Versa-Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Thermometers, Stick, Pocket . . . . . . . . . . . . . . . . . . . . . . . .295 Vibrating Table , Concrete Consistency . . . . . . . . . . . . . . .155
Thermometers, Surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . .298 Vibrating Table Apparatus. . . . . . . . . . . . . . . . . . . . . . . . . . .155
Time of Set, Data Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 Vibrating Table with Controller . . . . . . . . . . . . . . . . . . . . . . . .80
Timer, Analog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .239 Vibrating Table, Cement . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
Timer, Digital-Seconds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238 Vibrating Table, Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . .160
Timers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298 Vibrating Table, Cylinder Molds . . . . . . . . . . . . . . . . . . . . . .155
Tool Set, Nuclear Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Vibration Compaction Frame and Hammer Set . . . . . . . . .80
Transducer Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135 Vibration Compaction Frame Only . . . . . . . . . . . . . . . . . . . .80
Transducer, Data Extension Cable . . . . . . . . . . . . . . . . . . . .141 Vibration Compaction Hammer with Tamper . . . . . . . . . . .80
Transducer, Pore Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . .141 Vibration Indicator, Tachometer Type . . . . . . . . . . . . . . . . . .80
Transducers, Linear Potentiometer . . . . . . . . . . . . . . . . . . .141 Vicat Apparatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213-214
Transducers, Linear Strain . . . . . . . . . . . . . . . . . . . . . . . . . . .141 Vicat Apparatus, Computer Controlled . . . . . . . . . . . . . . .212
Transformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329 Vicat Penetrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213
Transit Label – Yellow II, Nuclear Gauge . . . . . . . . . . . . . . . .10 Vicat, Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211-212
Travel Limit Switch, Compression Machines. . . . . . . . . . . .173 Vicat, Replacement Needles . . . . . . . . . . . . . . . . . . . . . . . .214
Triaxial Cell Components . . . . . . . . . . . . . . . . . . . . . . . . . . .123 Vicat, Replacement Plunger Assembly . . . . . . . . . . . . . . . .214
Triaxial Cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123 Viscometer, Asphalt Institute. . . . . . . . . . . . . . . . . . . . . . . . .265
Triaxial Distribution Panels. . . . . . . . . . . . . . . . . . . . . . .124-125 Viscometer, Rotational . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256
Triaxial Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 Viscometer, Zeitfuchs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .265
Triaxial Load Frames. . . . . . . . . . . . . . . . . . . . . . . . . . . .118-122 Viscometers & Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . .265
Triaxial Loader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118-121 Viscosity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264-268
Triaxial Sample Prep . . . . . . . . . . . . . . . . . . . . . . . . . . . .137-138 Viscosity Bath, Auto Timers. . . . . . . . . . . . . . . . . . . . . . . . . .266
Triaxial Setup Components. . . . . . . . . . . . . . . . . . . . . .134-135 Viscosity Bath, Saybolt . . . . . . . . . . . . . . . . . . . . . . . . . .266-267
Triaxial Setup, Pressure Controller . . . . . . . . . . . . . . . . . . . .134 Viscosity, Constant Temperature Baths . . . . . . . . . . . .264-265
Triaxial Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126-133 Viscosity, Ford Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268
Triaxial, Acrylic Disk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Void Content Apparatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Triaxial, Filter Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Volume Change Apparatus . . . . . . . . . . . . . . . . . . . . . . . . .134
Triaxial, Membrane Tester . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Volume Change of Cement . . . . . . . . . . . . . . . . . . . . . . . . .207
Triaxial, Membranes, Latex . . . . . . . . . . . . . . . . . . . . . . . . . .138 Volume Change, Soil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Triaxial, Miter Box, Split . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Volumetric Flasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Triaxial, O-Ring Placing Tool . . . . . . . . . . . . . . . . . . . . . . . . .138 Voluvessel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Triaxial, O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Voluvessel, Balloons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Triaxial, Porous Stones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Wagner Turbidimeter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
Triaxial, Sample Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Wash Bottle, Guth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .323
Triaxial, Split Former, Vacuum . . . . . . . . . . . . . . . . . . . . . . . .138 Washer, Aggregate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Trimmer, Soil Sample . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 Water Baths, Marshall Testing. . . . . . . . . . . . . . . . . . . . . . . .238
Trowel, Forged Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 Water Level Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Water Retention Apparatus . . . . . . . . . . . . . . . . . . . . . . . . .209
Weight per Gallon Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

358
Standards INDEX

ASTM Standards
B215 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 C231 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 146, 147 C876 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187, 188
C20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 C233 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 C878 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
C29 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 C243 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206, 209 C939 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
C31 . . . . . . . . . .155, 159, 160, 161, 162, 165, 166, 167 C266 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 C1019. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170, 215, 207
C31M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 C267 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 C1040. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 8
C39 . . . . . . . . . .159, 165, 167, 170, 173, 176, 178, 215 C289 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 C1073. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
C40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 C293 . . . . . . . . . . . . . . . . . 158, 160, 170, 177, 180, 215 C1074. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
C67 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 C305 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 204, 205 C1090. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
C70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 C307 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166, 216, 217 C1170. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
C78 . . . . . . . . . . . . . . . . . . . . . . 158, 170, 177, 180, 215 C308 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 C1176. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
C87 . . . . . . . . . . . . . . . . . . . . . . . . . . .205, 206, 216, 217 C311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217, 219 C1191. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
C88 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 C321 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 C1202. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188, 194
C91 . . . . . . . . . . . . . . . . . . . . . . . . . . .205, 209, 213, 216 C341 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 C1231. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
C109/C109M . . 170, 177, 205, 206, 215, 216, 217, 329 C342 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 C1252. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
C110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206, 209, 213 C348 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205, 206 C1260. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
C115 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 C359 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205, 214 C1314. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176, 177
C117 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 C360 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 C1583. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
C127 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 63 C386 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 C1604. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
C128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61, 64 C403 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151, 155, 160 C1610. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
C131 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 C409 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 C1611. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
C136 . . . . . . . . . . . . . . . . . . . . . . . .39, 40, 41, 58, 59, 60 C414 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 C1621. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
C1362. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 C430 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 C1621M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
C138 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151, 153, 160 C451 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 C1712. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
C138M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 C452 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 C1740. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
C140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176, 177 C457 Part B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 C1760. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
C141 . . . . . . . . . . . . . . . . . 205, 209, 213, 216, 220, 221 C469 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170, 179, 215 D04-WK34713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
C143 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152, 153 C470 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155, 159 D4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
C143M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152, 153 C470 Method B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 D5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262, 263
C150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 C472 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213, 216 D6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
C1506. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 C490 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218, 219 D36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
C151 . . . . . . . . . . . . . . . . . . . . . . . . . .218, 219, 220, 221 C496 . . . . . . . . . . . . . . . . . . . . . . . . . .159, 170, 178, 215 D70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
C157 . . . . . . . . . . . . . . . . . . . . 160, 2097, 217, 218, 219 C511 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 D71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
C173 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150, 153 C535 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 D75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 40, 41
C173M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 C579 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 D88 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266, 267
C174 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 C593 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205, 206 D92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
C183 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 C596 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217, 219 D95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272, 274
C185 . . . . . . . . . . . . . . 21, 205, 206, 214, 217, 329, 331 C597 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189, 190 D97 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
C186 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 C617 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165, 167, 216 D109. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
C187 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211, 213 C618 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 D113. . . . . . . . . . . . . . . . . . . . . . . . . .258, 259, 260, 261
C188 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 C642 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 D115. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
C191 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211, 213, 214 C666 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146, 195, 196 D117. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268, 271
C191 Method B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 C702 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 40, 41 D139. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
C192 . . . . . . . . . . . . . . . . .150, 157, 158, 159, 160, 162, C778 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 40, 41, 205 D189. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
. . . . . . . . . . . . . . . . . . . . . . 165-167, 190, 207, 218, 324 C780 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151, 213, 214 D217. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262, 263
C204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 C780 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 D244. . . . . . . . . . . . . . . . . . 71, 266, 267, 272, 273, 274
C207 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 C803 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183, 185 D333. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71, 268
C215 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 C805 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 D346. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 324
C227 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218, 219, 220 C806 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 D365. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
C230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 C807 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 D402. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272, 274
C830 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 D421. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 75

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 359
INDEX Standards

ASTM Standards
D422. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 90 D2234. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 D6521-05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
D424. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 D2343. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 D6648. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
D445. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264, 265 D2416. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 D6758. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
D446. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 D2419. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 D6760. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
D457. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 D2434. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 90 D6910. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
D558. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77, 79, 206 D2435. . . . . . . . . . . . . . . . . . . . . . . . .102, 104, 106, 108 D6925. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250, 251, 257
D559. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77, 79, 206 D2500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268 D6926. . . . . . . . . . . . . . . . . . . . . . . . .226, 228, 230, 234
D560. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77, 79, 206 D2726. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 D6927. . . . . . . . . . . . . . . . . . . . . . . . . .82, 235, 236, 262
D698. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77, 79, 206 D2850. . . . . . . . . .82, 92, 118, 122, 124, 125, 137, 168 D6928. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
D806. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 D2872. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255 D6931. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232, 235, 245
D854. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 D2884. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 D6938. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 8
D937. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 D2937. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 D6951. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 23
D968. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 D2950. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 8 D6997. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272, 274
D1168. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 D2961. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 D7234. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183, 184
D1188. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 D3080. . . . . . . . . . . . . . . . . . . . . . . . .110, 111, 114, 115 D7313. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242, 243
D1191. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 D3143. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 D7369. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242, 243, 244
D1194. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 D3385. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 D7382-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
D1195. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 D3497. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244, 245 D7402. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
D1196. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 D4057. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 D7428. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
D1200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268 D4123. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242, 243, 244 D7460. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248, 249
D1265. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 D4253. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 D7522. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
D1310. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 D4254. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 D7698. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
D1321. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262, 263 D4318. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85, 332 D8044. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
D1395. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 D4380. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 E4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .171, 172, 173, 176
D1403. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262, 263 D4402. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 E11 . . . . . . . . . . . . . . . . . . 42, 43, 44, 45, 55, 56, 57, 61
D1452. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 D4429. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 E28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269, 333
D1461. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272, 274 D4541. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183, 184 E74 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142, 235
D1514. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 D4543. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 E102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266, 267
D1556. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 D4546. . . . . . . . . . . . . . . . . . . . . . . . .102, 104, 106, 108 E123 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272, 274
D1557. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77, 79 D4644. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 E149 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
D1558. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 77 D4647. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 E230-1993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
D1559. . . . . . . . . . . . . . . . . . . . . .92, 118, 122, 124, 125 D4767. . . . . . . . . .82, 92, 118, 122, 124, 125, 137, 168 E276 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
D1587. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 D4791. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 E303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
D1754. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 D4829. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 E389 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
D1831. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 D4867. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236, 262 E877 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
D1855. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 D4944. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35, 65 E1907 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
D1856. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 D5084. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91, 92, 125 E2251 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
D1883. . . . . . . . . . . . . . . . 77, 81, 82, 83, 118, 122, 234 D5126. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 E2835-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
D1963. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 D5321. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 F1869 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
D2013. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 D5329. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262, 263 F2170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200, 201
D2013. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 D5581. . . . . . . . . . . . . . . . . 82, 226, 231, 234, 236, 262 F2170-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
D2041. . . . . . . . . . . . . . . . . . . . . . . . .62, 2379, 238, 239 D5621. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 F21703 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
D2042. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273 D5731. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 F2420 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
D2166. . . . . . . . . .82, 92, 118, 122, 124, 125, 137, 168 D5856. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 F2659 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200, 201
D2167. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 D5873. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69, 180 Pending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
D2168. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 D5882. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 TP62 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244, 245, 247
D2170. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 D5892. . . . . . . . . . . . . . . . . . . . . . . . .258, 259, 260, 261 WK26816 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
D2171. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265, 277 D6024. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
D2172. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275, 277 D6074. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
D2172 (Method E) . . . . . . . . . . . . . . . . . . . . . . . . . . 276 D6084. . . . . . . . . . . . . . . . . . . . . . . . .258, 259, 260, 261
D2205. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 D6243. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
D2234. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324 D6307. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

360
Standards INDEX
AASHTO Standards
G57 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 T126....................................................159, 162, 166, 167 T246...............................................................82, 118, 122
G187. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 T127............................................................................. 205 T248...................................................................39. 40, 41
M92 .............................................................44, 45, 55, 57 T129............................................................................. 213 T256............................................................................. 283
M152 ...................................................................206, 214 T131............................................................ 211, 212, 213 T275................................................................................62
M201 ........................................................................... 162 T132............................................................................. 205 T277............................................................................. 190
M205 ........................................................................... 153 T133................................................................................64 T283...................................232, 233, 234, 235, 237, 238
M205 ........................................................................... 159 T134......................................................................... 77, 79 T296...............................82, 92, 118, 122, 123, 124, 125
M210 ...................................................................218, 219 T135......................................................................... 77, 79 T297...............................82, 92, 118, 122, 123, 124, 125
R28-06 ......................................................................... 253 T136................................................................................77 T301............................................................................. 261
T19............................................................................... 150 T137........................................... 205, 206, 217, 329, 331 T307.....................................................................242, 244
T21............................................................................... 208 T142................................................................................64 T310..............................................................................7, 8
T22....................159, 166, 167, 171, 172, 173, 176, 177 T144................................................................................39 T312.....................................................................250, 251
T23............................158, 159, 160, 161, 162, 166, 167 T152....................................................155, 146, 147, 206 T313............................................................................. 254
T27.....................................................................39, 40, 41 T153............................................................................. 210 T316............................................................................. 256
T43..................................................................................64 T154............................................................................. 209 T321.....................................................................248, 249
T44............................................................................... 273 T157............................................................................. 196 T324............................................................................. 246
T47............................................................................... 256 T158............................................................................. 150 T326................................................................................66
T48............................................................................... 271 T160.....................................................................219, 221 T327................................................................................68
T49.......................................................................262, 263 T161............................................................................. 196 T358-15 ...............................................................193, 194
T50............................................................................... 268 T162...............................................................75, 204, 205 TP31............................................................ 242, 243, 244
T51.......................................................................259, 260 T164.....................................................................275, 276 TP33................................................................................66
T53.......................................................................268, 269 T164 Method B ..................................................276, 277 TP62............................................................ 242, 243, 245
T59.............................................................. 272, 273, 274 T166................................................................................62 TP79.....................................................................242, 243
T60............................................................................... 218 T176................................................................................87 TP95-11....................................................................... 193
T67............................................................................... 178 T177............................................................................. 177 TP124 .......................................................................... 235
T71.............................................................. 205, 206, 216 T179............................................................................. 256
T72.......................................................................266, 267 T180......................................................................... 77, 79
T78.......................................................................273, 274 T183............................................................................. 152
T79............................................................................... 270 T185............................................................................. 205
T84........................................................................... 61, 64 T186............................................................................. 213
T85..................................................................................62 T187............................................................................. 262
T87..................................................................................75 T191................................................................................20
T88........................................................................... 88, 89 T192................................................................................57
T89..................................................................................85 T193............77, 81, 82, 83, 92, 118, 122, 124, 125, 234
T90........................................................................... 84, 85 T196............................................................................. 150
T96..................................................................................66 T197.....................................................................151, 155
T97......................................................158, 159, 160, 177 T198.....................................................................159, 178
T98............................................................................... 220 T199............................................................................. 147
T99........................................................................... 77, 79 T201............................................................................. 265
T106............................................................................. 177 T208...............................82, 92, 118, 122, 123, 124, 125
T288................................................................................34 T209...............................................................62, 237, 238
T100................................................................................64 T216....................................................102, 104, 106, 108
T102............................................................................. 268 T217......................................................................... 35, 65
T104................................................................................63 T220................................................................................77
T106........................................... 205, 206, 216, 217, 329 T228................................................................................64
T107.....................................................................218, 221 T231.....................................................................166, 167
T110............................................................ 272, 273, 274 T236....................................................110, 111, 114, 115
T119.....................................................................152, 153 T240............................................................................. 255
T121............................................................................. 150 T245.............................82, 118, 122, 226, 228, 230-234

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 361
INDEX Standards
Other Standards
ACI 2242-01 ....................................................198 CEN ISO/TS 17892 ...........................................86 EN 413 ............................................................204
ACI 318 ...................................................185, 186 CS-TOT ...........................................................252 EN 4554-1 .......................................................215
AFNOR NF P 94-160-1....................................192 CS9010-1115 ..........................................249, 250 EN 459-2 .........................................................215
BIS 2000 ..........................................................268 CS9010-1230 ..........................................250, 253 EN 459-2 .........................................................206
BS 1337-2 ..........................................................86 CTM 346..........................................................255 EN 480 ............................................................204
BS 1377 Part 5 ...................................................89 CTM 533..........................................................152 EN 480-2 .........................................................212
BS 1377: 8 .......................................................137 DD226 .............................................................245 EN12697-34 ....................................232, 233, 234
BS 1377: Part 4 ......................81, 82, 83, 118, 234 DIN 1164 ...................75, 204, 205, 210, 211, 212 ENV 206 ..........................................................181
BS 1377: Part 4: 1990 ..........82, 92, 122, 124, 125 DIN 1168 gypsum ...........................................211 FM 1-T 180 ........................................................77
BS 1377: Part 6 ..........................................92, 125 DIN 1834 ...........................................................15 FM 5-515 ...........................................................77
BS 1377: Part 6: 1990 ..................................91, 92 DIN 52011 .......................................................268 IGJ/T 23-2001 .................................................181
BS 1377: Part 7 ................................................118 EM1110-1-1804 ................................................79 IL DOT 502 ........................................................26
BS 1377: Part 7: 1990 ..........82, 92, 122 ,124, 125 EN 1015 ..........................................................183 IS1311 .............................................................190
BS 1377: Part 8 ................................................118 EN 1015-11 .....................................................215 ISO 17025 .....................................................6, 10
BS 1377: Part 8: 1990 ..........82, 92, 122 ,124, 125 EN 1015-7 .......................................................206 ISO 3105 .........................................................265
BS 1881 ...................................153, 181, 183, 185 EN 1097-8 .......................................................284 ISO 4624 .........................................................183
BS 1881 Part 201 .............................................188 EN 1338 ..........................................................180 ISO 565 .......................................................42, 43
BS 1881 Part 202 .............................................181 EN 1339 ..........................................................180 ISO 679 .............................................75, 204, 205
BS 1881 Part 203 .............................................190 EN 1348 ..........................................................183 ISO 9001: 2008 ...................................................3
BS 1881 Part 204 .....................................185, 186 EN 12350 ........................................................154 ISO/IEC 17025: 2005 ........................................10
BS 1881 Part 207 .............................................183 EN 12350-3 .....................................................155 ISO1920-7:2004 ..............................................190
BS 3892 .............................................75, 204, 205 EN 12390-5 .....................................................180 ISO IDIS8045 ...................................................181
BS 3892-1 ........................................................215 EN 12504 ........................................................189 NCHRP 1-28A,19, 9-29 ...........................242, 243
BS 4550 ...................................................210, 215 EN 12504-4 .....................................................190 NF P15-411 .......................................75, 204, 205
BS 5325 ...........................................................197 EN 12591 ........................................................255 NF P15/431 .....................................................211
BS 598 .............................................232, 233, 234 EN 12697 Annex A, B, C, D and E ..........242, 243 NF P94-052,1 ....................................................86
BS 598: Part 107 ................................82, 118, 122 EN 12697-10 ...........................................250, 251 Ontario LS-618 ..................................................68
BS 812 ...............................................................66 EN 12697-22 ...................................................246 PTM705 ...................................................226, 228
BS 812 Pt 114 ..................................................284 EN 12697-24 Annex D ............................248, 249 R68 ..........................................226, 228, 230, 231
BS 8203 ...........................................................197 EN 12697-25 (A) ..............................................245 SHRP M-002 ............................................250, 251
BS 8293 ...........................................................197 EN 12697-25 (Method A) ................................245 T 0736-2011 ............................................250, 251
BS EN 1097-8 ..................................................284 EN 12697-26 (C & E) .......................................245 TB 10102-2004..................................................16
BS EN 12390-3 ........................................170, 215 EN 12697-26 (D & E) .......................................245 Test Standard No. 158 (Method 211) ................57
BS EN 14771 ...................................................254 EN 12697-26 Annex B.............................248, 249 TEX-241-F ...............................................250, 251
BS EN 196-3 ....................................................214 EN 12697-33 ...................................................247 Texas 845-49-40 ................................................68
BS 1377: 5 ...............................102, 104, 106, 108 EN 12697-44 SCB ...................................242, 243 TP BF-StB B8.3 ..................................................16
BS 1377: 7 ...............................110, 111, 114, 115 EN 13459-2 .....................................................215 TP87 ................................................................254
BS 1377 .............................................................15 EN 1348 ..........................................................182 UNE 103.102 .....................................................88
BS 1377:8 ........................................................168 EN 1338 ..........................................................180 UNE 7111 ........................................................268
BS 1881 ...........................................................152 EN 1339 ..........................................................180 UNI 9419 .........................................................155
BS 1881:104 ....................................................155 EN 1427 ..........................................................268
BS 1881:203 ....................................................188 EN 14769 ........................................................253
BS 2000 ...........................................................256 EN 1542 ..........................................................183
BS 4550 ...................................................211, 212 EN 1744-1 .......................................................215
BS 5325 ...........................................................201 EN 196 ......................75, 204, 205, 210, 211, 215
BS 8203 ...........................................................201 EN 196 -1,3,9 ..................................................204
BS 8293 ...........................................................201 EN 196-1 .........................................................215
CA Method 216B ..............................................77 EN 196-3 .........................................211, 212, 213
CECS21 ...........................................................190 EN 196-9 .........................................................208
EN 1997 ............................................................70

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

362
Conversion Charts

Conversion Charts
Use the charts on these pages to convert between units. To convert, find the 1 value in the column of the unit you desire to convert.
Moving left or right on the same row as the 1 value for the unit you want to convert reveals the conversion factor for the new unit.
Weight (Mass)
Tonne (Mg) kg g UK Ton US Ton cwt lb oz
6 3
1 1000 10 0.9842 1.1011 19.66 2.205 x 10 3.527 x 104
3 -4 -3 -2
10 1 1000 9.842 x 10 1.101 x 10 10966 x 10 2.2046 35.274
-6 -3 -7 -6 -5 -3
10 10 1 9.842 x 10 1.101 x 10 1.966 x 10 2.204 x 10 3.527 x 10-2
1.016 1016 1.016 x 106 1 1.12 20 2240 35840
5
0.9081 908.1 9.081 x 10 08928 1 17.856 2000 32000
5.085 x 10-2 50.85 5.085 x 104 0.05 0.0560 1 112 1792
-4 -4 -4 -3
4.536 x 10 0.4536 453.6 4.46 x 10 5 x 10 8.92 x 10 1 16
2.835 x 10-5 2.835 x 10-2 28.349 2.79 x 10-5 3.125 x 10-5 5.580 x 10-4 6.25 x 10-2 1

Length
km m mm mile yard ft in 10-3 in
6 4
1 1000 10 0.6214 1094 3281 3.937 x 10 3.937 x 107
10-3 1 1000 6.214 x 10-4 1.0936 3.281 39.370 3.937 x 104
-6 -3 -7 -3 -3 -2
10 10 1 6.214 x 10 1.094 x 10 3.281 x 10 3.937 x 10 39.37
1.6094 1609.4 1.609 x 106 1 1760 5280 63360 6.336 x 107
9.144 x 10-4 0.9144 914.41 5.682 x 10-4 1 3 36 36000
3.048 x 10-4 0.3048 304.8 1.894 x 10-4 0.3333 1 12 12000
2.54 x 10-5 0.0254 25.4 1.578 x 10-5 2.778 x 10-2 8.333 x 10-2 1 1000
2.54 x 10-8 2.54 x 10-5 0.0254 1.578 x 10-8 2.778 x 10-5 8.333 x 10-5 10-3 1

Area
km2 m2 cm2 mm2 sq. mile acre yd2 ft2 in2
1 10-6 1010 1012 0.38612 247.11 1.196 x 106 1.076 x 107 1.550 x 109
-6 4 6 -7 -4
10 1 10 10 3.86 x 10 3.86 x 10 1.11960 10.764 1550
10-10 10-4 1 100 3.86 x 10-11 3.86 x 10-8 1.196 x 10-4 1.076 x 10-3 0.1550
10-12 10-6 10-2 1 3.86 x 10-13 3.86 x 10-10 1.196 x 10-6 1.076 x 10-5 1.550 x 10-3
2.590 2.59 x 106 2.59 x 1010 2.59 x 1012 1 639.96 3.097 x 106 1.076 x 107 4.01 x 108
-3 7 9 -3
4.047 x 10 4047 4.047 x 10 4.047 x 10 1.563 x 10 1 4840 43560 6.273 x 106
8.36 x 10-7 0.8361 8.36 x 105 8.36 x 105 3.228 x 10-7 2.066 x 10-4 1 9 1296
-8 -3 -8 -5
9.29 x 10 9.29 x 10 929 92900 3.587x 10 2.296 x 10 0.1111 1 144
6.45 x 10-10 6.45 x 10-4 6.4516 645.16 2.491 x 10-10 1.594 x 10-7 7.716 x 10-4 6.944 x 10-3 1

Volume
m3 dm3 liter cm3 (ml) yd3 ft3 in3 UK gallon US gallon
-3 6
1 10 10 1.3079 35.311 6102 219.97 264.17
-3 3 -3 -2
10 1 10 1.308 x 10 3.531 x 10 61.02 0.2200 0.2642
10-6 10-3 1 1.308 x 10-6 3.531 x 10-5 6.102 x 10-2 2.199 x 10-4 2.642 x 10-4
0.7646 764.6 7.646 x 105 1 27 46650 168.19 201.99
-2
2.832 x 10 28.32 2.832 x 10-4 3.704 x 10-2 1 1728 6.229 7.481
-5 -2 -5 -4 -3
1.639 x 10 1.639 x 10 16.387 2.144 x 10 5.787 x 10 1 3.605 x 10 4.329 x 10-3
-3 3 -3
4.546 x 10 4.546 4.546 x 10 5.946 x 10 0.1605 277.42 1 1.2008
-3 3 -3
3.785 x 10 3.785 3.785 x 10 4.951 x 10 0.1337 231 0.8327 1

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 363
Conversion Charts

Density
Tonne/m3
Mg/m3 kg/m3 lb/in3 UK Ton/yd3 US Ton/ yd3 lb/ft3
g/cm3
1 1000 0.03613 0.75247 .08428 62.43
10-3 1 3.613 x 10-5 7.525 x 10-4 8.428 x 10-4 6.243 x 10-2
27.680 27680 1 20.828 23.328 1.728 x 103
1.3289 1.328 x 103 4.801 x 10-2 1 1.12 82.955
3 -2
1.1865 1.1186 x 10 4.287 x 10 0.8928 1 74.074
1.602 x 10-2 16.019 5.787 x 10-4 1.205 x 10-2 1.35 x 10-2 1

Permeability
m/s cm/s m/year Darcy ft/yr ft/day
1 100 3.156 x 107 1.04 x 105 1.035 x 108 2.835 x 105
0.01 1 3.156 x 105 1.04 x 103 1.035 x 106 2.834 x 103
-8 -6 3
3.169 x 10 3.169 x 10 1 3.28 x 10 3.281 8.982 x 10-3
9.66 x 10-6 9.66 x 10-4 304 1 1000 2.74
-9
9.658 x 10 9.659 x 10-7 0.3048 10-3 1 2.738 x 10-3
3.527 x 10-6 3.527 x 10-4 111.33 0.365 365.25 1

Force and Weight

MN kN N kgf tonf lbf
6 5
1 1000 10 1.0196 x 10 100.4 2.248 x 105
10-3 1 103 101.96 0.1004 224.82
-6 -3
10 10 1 0.10196 1.004 x 10-4 0.2248
-6 -3 -4
9.807 x 10 9.807 x 10 9.807 1 9.842 x 10 2.2048
9.964 x 10-3 9.964 9964 1016 1 2240
-6 -3 -4
4.448 x 10 4.448 x 10 4.448 0.45455 4.464 x 10 1

Pressure, Stress and Modulus of Elasticity

Mn/m2 kN/m2 kp psi
bar atm m H2O ft H2O mm Hg Ton/ft2 lbf/ft2
MPa kPa kgf/cm2 lbf/in2
1 1000 10.197 10 9.869 102.2 355.2 7500.6 9.320 145.04 20866
-2 -3
0.001 1 1.019 x 10 0.0100 9.87 x 10 0.1022 0.3352 7.5006 0.0093 0.14504 20.886
-2
9.807 x 10 98.07 1 0.9807 0.9678 10.017 32.866 735.56 0.9139 14.223 2048.1
0.100 100 1.0197 1 0.9869 10.215 33.515 750.06 0.9320 14.504 2088.6
0.1013 1.0133 1.0332 1.0132 1 10.351 33.959 760.02 0.9444 14.696 2116.2
9.788 x 10-3 9.7885 9.983 x 10-2 9.789 x 10-2 9.661 x 10-2 1 3.2808 73.424 9.124 x 10-2 1.4198 204.45
-3 -2 -2 -2 -2
2.983 x 10 2.935 3.043 x 10 2.984 x 10 2.945 x 10 0.3048 1 22.377 2.781 x 10 0.43275 62.316
1.333 x 10-4 0.1333 1.3595 x 10-2 1.333 x 10-3 1.315 x 10-3 1.362 x 10-2 4.469 x 10-2 1 1.243 x 10-3 1.934 x 10-2 2.7846
0.1073 107.3 1.0942 1.0730 1.0589 10.960 35.960 804.78 1 15.562 2240
6.895 x 10-3 6.895 7.031 x 10-2 6.895 x 10-2 6.805 x 10-2 0.7043 2.3108 51.714 6.426 x 10-2 1
144
-5 -2 -4 -4 -4 -3 -2 -4 -3 1
4.788 x 10 4.788 x 10 4.883 x 10 4.788 x 10 4.725 x 10 4.891 x 10 1.605 x 10 0.3591 4.464 x 10 6.944 x 10

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

364
Notes

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 365
Notes

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

366
Notes

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 367
Notes

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

368
Shipping and Policy Information

$ Pricing
Prices appearing on our website are U.S. List Prices exclusively.
defective at our option. Under no condition will we allow labor
charges or other expenses to repair defective merchandise without
Orders for shipment outside the United States will not be accepted. our prior approval.

Shipping Humboldt Mfg. Co. makes or implies no other warranties of any kind
Our goal in shipping is to provide our customers with their purchases or nature of merchantability or fitness for particular purposes that
quickly and cost effectively. To this end we try to offer several choices exceed any previously stated obligation.
in shipping so our customers can decide how fast they need items vs.
We accept no responsibility for damage or abuse to apparatus due
the costs involved to ship them.
to improper installation or operation. We accept no responsibility
Items Shippable by UPS for and will not pay for any lost profits incidental, consequential, or
For all UPS-shippable items, our website will calculate the shipping special damages.
costs at the time of your order corresponding to the shipping method
Returned Goods
you choose. These shipping costs are based on the parameters you
It is the Customer's responsibility to inspect all shipments for
choose in the shipping calculator, i.e. ground, overnight, 2-day, etc.
visual damage upon receipt.
or if the items are being shipped to a residential address.
Items may not be returned to Humboldt Mfg. Co. without a Return
Some items, typically large items that don't weigh much or small
Goods Authorization (RGA) number which can be obtained by
items that weigh a lot, may cost more to ship.
contacting the Sales Department. No item is returnable after 30 days
Orders placed on Friday involving Overnight or Next Day from shipping to customer. All returns are subject to a restocking
shipping, will not be delivered on Saturdays. If you need Saturday charge of 20% of selling price ($20.00 minimum). Any use and/or
delivery or concerned about expedited delivery, please call. damage by customer, or due to customer's improper repacking, is
subject to further charges as necessary to place item(s) in a resalable
Truck Shipments condition. Items returned must be sent prepaid, no C.O.D. returns
Items requiring shipment by truck cannot currently be calculated in
can be accepted.
real time on our website. If you order an item that is clearly marked
as a Truck Item, you will be able to checkout, but we will not charge Claims
your credit card. Our sales department will determine the shipping All claims for shortage, breakage or other discrepancies should be
costs and contact you via email. Once we have an agreement from filed with the carrier immediately upon receipt of the shipment.
you for the shipping costs, the order and credit card information will
Disclaimer of Responsibility Safe use of Equipment
be processed. Truck shipping costs will normally be provided within a SAFETY Use of instruments, apparatus, and equipment described on this
couple of hours.
website may involve hazardous procedures and/or materials. Use may
Truck shipments to a building without a lift gate will incur a $150.00 also be subject to regulatory limitations. Information on this website is
Lift Gate Charge. This is a standard pass-along charge from all not intended to address the many safety, legal, and regulatory issues
shipping companies. associated with use. It is the responsibility of the user to:

Order Processing 1. Follow appropriate methods to insure that industry standards are
We strive to ship all orders within 1-2 days of receiving them. met for all safety and health issues resulting from use.

Tax 2. Determine applicability of all regulatory limitations prior to use.

+ Tax is charged on all orders shipped to Illinois or North Carolina.

Tax-exempt customers in these states need to have a tax exempt
3. Be familiar with all applicable test standards and test procedures.

certificate on file with us to avoid being charged tax. 4. Comply with all applicable Federal, State and Local laws
and regulations relating to the use of such goods. Neither
Out of Stock Items
Humboldt Mfg. Co. nor other manufacturers of equipment
While we strive to maintain an inventory second to none in our
sold by Humboldt Mfg. Co. can assume any liability express or
industry, there are times when something may be out of stock. In
implied for user's failure to follow Industry standards for safety
those cases, someone from Humboldt's sales department will contact
and health, or to comply with applicable regulatory limitations,
you via email with the status of your order.
standards, and procedures.
Guarantee
Humboldt Mfg. Co. products are guaranteed against defective
materials and workmanship for a period of 12 months from the
date of shipment. We will repair or replace such items as may prove

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

www.humboldtmfg.com
Visit our websites where you
can find and purchase all the
products listed in this catalog,
as well as find support, service
and lots more.

www.humboldtscientific.com
 Humboldt Mfg. Co.
875 Tollgate Road, Elgin, Illinois 60123
1.800.544.7220 toll free, 1.708.468.6300 main
1.708.456.0137 fax

Humboldt Scientific, Inc.

2525 Atlantic Avenue, Raleigh, North Carolina 27604
1.800.537.4183 toll free, 1.919.833.3190 main
1.919.833.5283 fax

www.humboldtmfg.com
1.800.544.7220