Scribd Logo
Upload

Welcome to Scribd!

  • 53 views

    Profile & Cutter Placement: Reference Photo: 17 1/2" FC619

    Uploaded by

    Hendra Siswanto
    Bit 17.5in Hughes

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Profile & Cutter Placement: Reference Photo: 17 1/2" FC619

    Uploaded by

    Hendra Siswanto
    53 views1 page
    Bit 17.5in Hughes

    Original Title

    175_FC619

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Bit 17.5in Hughes

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    53 views1 page

    Profile & Cutter Placement: Reference Photo: 17 1/2" FC619

    Uploaded by

    Hendra Siswanto
    Bit 17.5in Hughes

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    17 1/2” FC619

    (444.5mm)

    • Profile & Cutter Placement


    Bit profile with engineered cutter placement offers
    the right combination of bit aggressiveness and
    durability to provide the required ROP and minimize
    premature cutter damage.

    • Bit Stability
    The stability features ensure the bit will drill in a
    stable mode and limit damage due to excessive
    vibration.

    • CFD Hydraulics
    Computational Fluid Dynamics is used as a design
    tool to ensure optimum cuttings removal and
    balance fluid flow while limiting bit body erosion.

    • Gauge Protection
    Tungsten Carbide Inserts in the gauge limit the
    Reference Photo: 17 1/2” FC619 severity of damage while drilling and ensure hole
    quality.
    This photo may not represent the actual drill bit
    or the drill bit features

    PRODUCT SPECIFICATIONS:

    IADC M323
    Number of Blades 6
    Primary Cutter Size 0.750 in (19.0 mm)
    Number of Nozzles 9
    Nozzle Type SP
    Total Flow Area (TFA) Field Adjustable
    Junk Slot Area (JSA) 65.9 in² (425.0 cm²)
    Connection: 7-5/8 API REG
    Makeup Torque:
    8 1/2" Bit Sub 48.3 - 53.0 kft-lb (65.5 - 71.9 kNm)
    8 3/4" Bit Sub 57.7 - 63.5 kft-lb (78.2 - 86.1 kNm)
    9"+ Bit Sub 60.0 - 67.0 kft-lb (81.4 - 90.9 kNm)
    Reference Part Number
    Status M

    OPERATING RECOMMENDATIONS *:
    Hydraulic Flow Rate: 950 - 1800 gpm (3600 - 6800 lpm)
    Rotation Speed: For Rotary and Motor Applications
    Max. Weight On Bit: 60 klb (27 tn or kdaN)

    © 2008 Hughes Christensen

    *The ranges of bit weight and RPM shown are representative of typical operating parameters, but will not necessarily yield optimum bit life or lowest drilling cost. It is
    not recommended that the upper limits of both weight and RPM be run simultaneously. Contact you local Hughes Christensen representative for recommendations in
    your area

    You might also like